Document Search Inner Frame

Conforms to Regulation (EC) No.
1907/2006 (REACH), Annex II, as amended by Commission Denmark

Regulation (EU) 2020/878
SAFETY DATA SHEET

Date of issue/Date of revision : 16 February 2023 Version : 2.08
SECTION 1: Identification of the substance/mixture and of the company/

undertaking
1.1 Product identifier
Product name : DYRUP LOFT & VÆG EKSTRA SPÆRRENDE 2
Product code : 10120DSC2365
Other means of identification
00422127
1.2 Relevant identified uses of the substance or mixture and uses advised against
Product use : Consumer applications, Professional applications, Used by spraying, Application by non
spray methods..
Use of the substance/ : Coating.
mixture
1.3 Details of the supplier of the safety data sheet

PPG Coatings Nederland B.V.
Amsterdamseweg 14
1422 AD Uithoorn
Netherlands
+31 (0)297 541234
Fax: +31 (0)297 541806
e-mail address of person : Product.Stewardship.EMEA@ppg.com

responsible for this SDS
National contact
PPG Coatings Denmark A/S
Gladsaxevej 300
2860 Søborg
+45 (0)56 64 50 00
+45 (0)56 64 50 55
1.4 Emergency telephone number

National advisory body/Poison Centre
Telephone number : Poison Information Centre; emergency telephone, public + 45 82 12 12 12 (health
sector +45 35 31 55 55)
English (GB) Denmark 1/15

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU)
2020/878
Code : 10120DSC2365 Date of issue/Date of revision : 16 February 2023
DYRUP LOFT & VÆG EKSTRA SPÆRRENDE 2
SECTION 2: Hazards identification

2.1 Classification of the substance or mixture
Product definition : Mixture
Classification according to Regulation (EC) No. 1272/2008 [CLP/GHS]
Not classified.
The product is not classified as hazardous according to Regulation (EC) 1272/2008 as amended.
See Section 16 for the full text of the H statements declared above.
See Section 11 for more detailed information on health effects and symptoms.
2.2 Label elements

Signal word : No signal word.
Hazard statements : No known significant effects or critical hazards.
Precautionary statements
General : Keep out of reach of children. If medical advice is needed, have product container or
label at hand.
Prevention : Not applicable.
Response : Not applicable.
Storage : Not applicable.
Disposal : Dispose of contents and container in accordance with all local, regional, national and
international regulations.
P102, P101, P501
Hazardous ingredients Not applicable.
Supplemental label : Contains 1,2-benzisothiazol-3(2H)-one and reaction mass of 5-chloro-2-methyl-2H-
elements isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic
reaction.
Safety data sheet available on request.
Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe
spray or mist.
Annex XVII - Restrictions : Not applicable.
on the manufacture,
placing on the market and
use of certain dangerous
substances, mixtures and
articles
Special packaging requirements
Containers to be fitted : Not applicable.
with child-resistant
fastenings
Tactile warning of danger : Not applicable.
2.3 Other hazards
Product meets the criteria : This mixture does not contain any substances that are assessed to be a PBT or a vPvB.
for PBT or vPvB
Other hazards which do : None known.
not result in classification

2020/878
SECTION 3: Composition/information on ingredients
3.2 Mixtures : Mixture

Specific Conc.
Product/ingredient name Identifiers % by Classification Type
Limits, M-factors
weight
and ATEs
propylidynetrimethanol REACH #: ≤0.30 Repr. 2, H361 - [1]
01-2119486799-10
EC: 201-074-9
CAS: 77-99-6
1,2-benzisothiazol-3(2H)- EC: 220-120-9 <0.050 Acute Tox. 4, H302 ATE [Oral] = 1020 mg/ [1]
one CAS: 2634-33-5 Acute Tox. 2, H330 kg
Index: 613-088-00-6 Skin Irrit. 2, H315 ATE [Inhalation (dusts
Eye Dam. 1, H318 and mists)] = 0.4 mg/l
Skin Sens. 1, H317 Skin Sens. 1, H317: C
Aquatic Acute 1, H400 ≥ 0.05%
Aquatic Chronic 2, H411 M [Acute] = 1
reaction mass of 5-chloro- REACH #: <0.0010 Acute Tox. 3, H301 ATE [Oral] = 53 mg/kg [1]
2-methyl-2H-isothiazol- 01-2120764691-48 Acute Tox. 2, H310 ATE [Dermal] = 50 mg/
3-one and 2-methyl-2H- EC: 911-418-6 Acute Tox. 2, H330 kg
isothiazol-3-one (3:1) CAS: 55965-84-9 Skin Corr. 1C, H314 ATE [Inhalation
Index: 613-167-00-5 Eye Dam. 1, H318 (vapours)] = 0.5 mg/l
Skin Sens. 1A, H317 Skin Corr. 1C, H314:
Aquatic Acute 1, H400 C ≥ 0.6%
Aquatic Chronic 1, H410 Skin Irrit. 2, H315:
EUH071 0.06% ≤ C < 0.6%
Eye Dam. 1, H318: C
≥ 0.6%
Eye Irrit. 2, H319:
0.06% ≤ C < 0.6%
Skin Sens. 1, H317: C
≥ 0.0015%
M [Acute] = 100
M [Chronic] = 100
See Section 16 for
the full text of the H
statements declared
above.
There are no ingredients present which, within the current knowledge of the supplier and in the concentrations applicable,
are classified as hazardous to health or the environment, are PBTs, vPvBs or Substances of equivalent concern, or have
been assigned a workplace exposure limit and hence require reporting in this section.
[1] Substance classified with a health or environmental hazard
This mixture contains ≥ 1% of titanium dioxide. The Annex VI classification of titanium dioxide does not apply to this
mixture according to Note 10.
SECTION 4: First aid measures

4.1 Description of first aid measures
Eye contact : Remove contact lenses, irrigate copiously with clean, fresh water, holding the eyelids
apart for at least 10 minutes and seek immediate medical advice.
Inhalation : Remove to fresh air. Keep person warm and at rest. If not breathing, if breathing is
irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained
personnel.

2020/878
SECTION 4: First aid measures

Skin contact : Remove contaminated clothing and shoes. Wash skin thoroughly with soap and water
or use recognised skin cleanser. Do NOT use solvents or thinners.
Ingestion : If swallowed, seek medical advice immediately and show the container or label. Keep
person warm and at rest. Do NOT induce vomiting.
Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training.
4.2 Most important symptoms and effects, both acute and delayed
Potential acute health effects
Eye contact : No known significant effects or critical hazards.
Inhalation : No known significant effects or critical hazards.
Skin contact : No known significant effects or critical hazards.
Ingestion : No known significant effects or critical hazards.
Over-exposure signs/symptoms
Eye contact : No specific data.
Inhalation : No specific data.
Skin contact : No specific data.
Ingestion : No specific data.
4.3 Indication of any immediate medical attention and special treatment needed
Notes to physician : Treat symptomatically. Contact poison treatment specialist immediately if large
quantities have been ingested or inhaled.
Specific treatments : No specific treatment.
SECTION 5: Firefighting measures

5.1 Extinguishing media
Suitable extinguishing : Use an extinguishing agent suitable for the surrounding fire.
media
Unsuitable extinguishing : None known.
media
5.2 Special hazards arising from the substance or mixture

Hazards from the : In a fire or if heated, a pressure increase will occur and the container may burst.
substance or mixture
Hazardous combustion : Decomposition products may include the following materials:
products carbon oxides
metal oxide/oxides
5.3 Advice for firefighters

Special precautions for : Promptly isolate the scene by removing all persons from the vicinity of the incident if
fire-fighters there is a fire. No action shall be taken involving any personal risk or without suitable
training.
Special protective : Fire-fighters should wear appropriate protective equipment and self-contained breathing
equipment for fire-fighters apparatus (SCBA) with a full face-piece operated in positive pressure mode. Clothing
for fire-fighters (including helmets, protective boots and gloves) conforming to European
standard EN 469 will provide a basic level of protection for chemical incidents.

2020/878
SECTION 6: Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures
For non-emergency : No action shall be taken involving any personal risk or without suitable training.
personnel Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
entering. Do not touch or walk through spilt material. Put on appropriate personal
protective equipment.
For emergency responders : If specialised clothing is required to deal with the spillage, take note of any information in
Section 8 on suitable and unsuitable materials. See also the information in "For non-
emergency personnel".
6.2 Environmental : Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains and
precautions sewers. Inform the relevant authorities if the product has caused environmental
pollution (sewers, waterways, soil or air).
6.3 Methods and material for containment and cleaning up

Small spill : Stop leak if without risk. Move containers from spill area. Dilute with water and mop up
if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry material and
place in an appropriate waste disposal container. Dispose of via a licensed waste
disposal contractor.
Large spill : Stop leak if without risk. Move containers from spill area. Prevent entry into sewers,
water courses, basements or confined areas. Wash spillages into an effluent treatment
plant or proceed as follows. Contain and collect spillage with non-combustible,
absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in
container for disposal according to local regulations. Dispose of via a licensed waste
disposal contractor.
6.4 Reference to other : See Section 1 for emergency contact information.
sections See Section 8 for information on appropriate personal protective equipment.
See Section 13 for additional waste treatment information.
SECTION 7: Handling and storage

The information in this section contains generic advice and guidance. The list of Identified Uses in Section 1 should be
consulted for any available use-specific information provided in the Exposure Scenario(s).
7.1 Precautions for safe handling
Protective measures : Put on appropriate personal protective equipment (see Section 8).
Advice on general : Eating, drinking and smoking should be prohibited in areas where this material is
occupational hygiene handled, stored and processed. Workers should wash hands and face before eating,
drinking and smoking. Remove contaminated clothing and protective equipment before
entering eating areas. See also Section 8 for additional information on hygiene
measures.
7.2 Conditions for safe : Store between the following temperatures: 5 to 35°C (41 to 95°F). Store in accordance
storage, including any with local regulations. Store in original container protected from direct sunlight in a dry,
incompatibilities cool and well-ventilated area, away from incompatible materials (see Section 10) and
food and drink. Keep container tightly closed and sealed until ready for use. Containers
that have been opened must be carefully resealed and kept upright to prevent leakage.
Do not store in unlabelled containers. Use appropriate containment to avoid
environmental contamination. See Section 10 for incompatible materials before
handling or use.
7.3 Specific end use(s)

See Section 1.2 for Identified uses.

2020/878
SECTION 8: Exposure controls/personal protection

8.1 Control parameters
Occupational exposure limits
No exposure limit value known.
Recommended monitoring : Reference should be made to monitoring standards, such as the following: European
procedures Standard EN 689 (Workplace atmospheres - Guidance for the assessment of exposure
by inhalation to chemical agents for comparison with limit values and measurement
strategy) European Standard EN 14042 (Workplace atmospheres - Guide for the
application and use of procedures for the assessment of exposure to chemical and
biological agents) European Standard EN 482 (Workplace atmospheres - General
requirements for the performance of procedures for the measurement of chemical
agents) Reference to national guidance documents for methods for the determination
of hazardous substances will also be required.
DNELs
Product/ingredient name Type Exposure Value Population Effects
propylidynetrimethanol DNEL Long term Oral 0.34 mg/kg bw/day General population Systemic
DNEL Long term Dermal 0.34 mg/kg bw/day General population Systemic
DNEL Long term Inhalation 0.58 mg/m³ General population Systemic
DNEL Long term Dermal 0.94 mg/kg bw/day Workers Systemic
DNEL Long term Inhalation 3.3 mg/m³ Workers Systemic
1,2-benzisothiazol-3(2H)-one DNEL Long term Dermal 0.345 mg/kg bw/day General population Systemic
DNEL Long term Dermal 0.966 mg/kg bw/day Workers Systemic
DNEL Long term Inhalation 1.2 mg/m³ General population Systemic
DNEL Long term Inhalation 6.81 mg/m³ Workers Systemic
reaction mass of 5-chloro- DNEL Long term Inhalation 0.02 mg/m³ General population Local
2-methyl-2H-isothiazol-3-one
and 2-methyl-2H-isothiazol-
3-one (3:1)
DNEL Long term Inhalation 0.02 mg/m³ Workers Local
DNEL Short term Inhalation 0.04 mg/m³ General population Local
DNEL Short term Inhalation 0.04 mg/m³ Workers Local
DNEL Long term Oral 0.09 mg/kg bw/day General population Systemic
DNEL Short term Oral 0.11 mg/kg bw/day General population Systemic
PNECs
PNECs - Not available.
8.2 Exposure controls

Appropriate engineering : Good general ventilation should be sufficient to control worker exposure to airborne
controls contaminants.
Individual protection measures
Hygiene measures : Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Wash contaminated clothing before reusing. Ensure that eyewash stations and safety
showers are close to the workstation location.
Eye/face protection : Safety glasses with side shields. Use eye protection according to EN 166.
Skin protection
Hand protection :

2020/878
SECTION 8: Exposure controls/personal protection

Chemical-resistant, impervious gloves complying with an approved standard should be
worn at all times when handling chemical products if a risk assessment indicates this
is necessary.
Gloves : nitrile rubber, butyl rubber, PVC, Viton®
Body protection : Personal protective equipment for the body should be selected based on the task
being performed and the risks involved and should be approved by a specialist before
handling this product.
Other skin protection Appropriate footwear and any additional skin protection measures should be selected
based on the task being performed and the risks involved and should be approved by
a specialist before handling this product.
Respiratory protection : Respirator selection must be based on known or anticipated exposure levels, the
hazards of the product and the safe working limits of the selected respirator. If
workers are exposed to concentrations above the exposure limit, they must use
appropriate, certified respirators. Use a properly fitted, air-purifying or air-fed respirator
complying with an approved standard if a risk assessment indicates this is necessary.
Wear a respirator conforming to EN140. Filter type: organic vapour (Type A) and
particulate filter P3
Environmental exposure : Emissions from ventilation or work process equipment should be checked to ensure
controls they comply with the requirements of environmental protection legislation. In some
cases, fume scrubbers, filters or engineering modifications to the process equipment
will be necessary to reduce emissions to acceptable levels.
SECTION 9: Physical and chemical properties

The conditions of measurement of all properties are at standard temperature and pressure unless otherwise indicated.
9.1 Information on basic physical and chemical properties

Appearance
Physical state : Liquid.
Colour : Various
Odour : Odourless.
Odour threshold : Not available.
Melting point/freezing point : May start to solidify at the following temperature: 0°C (32°F) This is based on data
for the following ingredient: water.
Initial boiling point and : >37.78°C
boiling range
Flammability : Not available.
Upper/lower flammability or : Not applicable.
explosive limits
Flash point : Closed cup: Not applicable. [Product does not sustain combustion.]
Auto-ignition temperature : Not available.
Decomposition temperature : Stable under recommended storage and handling conditions (see Section 7).
pH : Not available.
Viscosity : Kinematic (40°C): >21 mm2/s
Solubility(ies) :
Media Result
cold water Soluble
Partition coefficient: n-octanol/ : Not applicable.
water
Vapour pressure :
2020/878
SECTION 9: Physical and chemical properties

Vapour Pressure at 20˚C Vapour pressure at 50˚C
Ingredient name mm Hg kPa Method mm kPa Method
Hg
water 23.8 3.2
Evaporation rate : Not available.

Relative density : 1.42
Explosive properties : Not available.
Oxidising properties : Product does not present an oxidizing hazard.
Particle characteristics
Median particle size : Not applicable.
9.2 Other information
No additional information.
SECTION 10: Stability and reactivity

10.1 Reactivity : No specific test data related to reactivity available for this product or its ingredients.
10.2 Chemical stability : The product is stable.
10.3 Possibility of : Under normal conditions of storage and use, hazardous reactions will not occur.
hazardous reactions
10.4 Conditions to avoid : When exposed to high temperatures may produce hazardous decomposition products.
Refer to protective measures listed in sections 7 and 8.
10.5 Incompatible materials : Keep away from the following materials to prevent strong exothermic reactions:
oxidising agents, strong alkalis, strong acids.
10.6 Hazardous : Depending on conditions, decomposition products may include the following materials:
decomposition products carbon oxides metal oxide/oxides
SECTION 11: Toxicological information

11.1 Information on hazard classes as defined in Regulation (EC) No 1272/2008
Acute toxicity
Product/ingredient name Result Species Dose Exposure
propylidynetrimethanol LD50 Dermal Rabbit 10 g/kg -
LD50 Oral Rat 14000 mg/kg -
1,2-benzisothiazol-3(2H)-one LC50 Inhalation Dusts and Rat 0.4 mg/l 4 hours
mists
LD50 Oral Rat 1020 mg/kg -
reaction mass of 5-chloro-2-methyl-2H- LD50 Oral Rat 53 mg/kg -
isothiazol-3-one and 2-methyl-2H-
isothiazol-3-one (3:1)
Conclusion/Summary : There are no data available on the mixture itself.
Irritation/Corrosion
Conclusion/Summary
Skin : There are no data available on the mixture itself.

2020/878

Eyes : There are no data available on the mixture itself.
Respiratory : There are no data available on the mixture itself.
Sensitisation
Product/ingredient name Route of Species Result
exposure
1,2-benzisothiazol-3(2H)-one skin Guinea pig Sensitising
Conclusion/Summary
Skin : There are no data available on the mixture itself.
Respiratory : There are no data available on the mixture itself.
Mutagenicity
Carcinogenicity
Reproductive toxicity
Teratogenicity
Specific target organ toxicity (single exposure)
Not available.
Specific target organ toxicity (repeated exposure)
Not available.
Aspiration hazard
Not available.
Information on likely : Not available.
routes of exposure
Potential acute health effects
Inhalation : No known significant effects or critical hazards.
Ingestion : No known significant effects or critical hazards.
Skin contact : No known significant effects or critical hazards.
Eye contact : No known significant effects or critical hazards.
Symptoms related to the physical, chemical and toxicological characteristics
Inhalation : No specific data.
Ingestion : No specific data.
Skin contact : No specific data.
Eye contact : No specific data.
Delayed and immediate effects as well as chronic effects from short and long-term exposure
Short term exposure
Potential immediate : Not available.
effects
Potential delayed effects : Not available.
Long term exposure
Potential immediate : Not available.
effects

2020/878

Potential delayed effects : Not available.
Potential chronic health effects
Not available.
Conclusion/Summary : Not available.
General : No known significant effects or critical hazards.
Carcinogenicity : No known significant effects or critical hazards.
Mutagenicity : No known significant effects or critical hazards.
Reproductive toxicity : No known significant effects or critical hazards.
Other information : Not available.
Sanding and grinding dusts may be harmful if inhaled. Contains isothiazolinones. May cause allergic reaction.
11.2 Information on other hazards
11.2.1 Endocrine disrupting properties
Not available.
11.2.2 Other information
Not available.
SECTION 12: Ecological information

12.1 Toxicity
Product/ingredient name Result Species Exposure
propylidynetrimethanol Acute LC50 >1000 mg/l Fish 96 hours
1,2-benzisothiazol-3(2H)-one Acute EC50 0.11 mg/l Algae 72 hours
Chronic NOEC 0.09 mg/l Fish 28 days
12.2 Persistence and degradability

Product/ingredient name Aquatic half-life Photolysis Biodegradability

1,2-benzisothiazol-3(2H)-one - - Readily
12.3 Bioaccumulative potential

Product/ingredient name LogPow BCF Potential
propylidynetrimethanol -0.47 - low
1,2-benzisothiazol-3(2H)-one 0.7 - low
12.4 Mobility in soil

Soil/water partition : Not available.
coefficient (KOC)
Mobility : Not available.
12.5 Results of PBT and vPvB assessment

This mixture does not contain any substances that are assessed to be a PBT or a vPvB.
12.6 Endocrine disrupting properties

2020/878
SECTION 12: Ecological information

Not available.
12.7 Other adverse effects

No known significant effects or critical hazards.
SECTION 13: Disposal considerations

13.1 Waste treatment methods
Product
Methods of disposal : The generation of waste should be avoided or minimised wherever possible. Disposal
of this product, solutions and any by-products should at all times comply with the
requirements of environmental protection and waste disposal legislation and any
regional local authority requirements. Dispose of surplus and non-recyclable products
via a licensed waste disposal contractor. Waste should not be disposed of untreated to
the sewer unless fully compliant with the requirements of all authorities with jurisdiction.
Hazardous waste : Within the present knowledge of the supplier, this product is not regarded as hazardous
waste, as defined by EU Directive 2008/98/EC.
European waste catalogue (EWC)
Waste code Waste designation
08 01 12 waste paint and varnish other than those mentioned in 08 01 11
Packaging
Methods of disposal : The generation of waste should be avoided or minimised wherever possible. Waste
packaging should be recycled. Incineration or landfill should only be considered when
recycling is not feasible.
Type of packaging European waste catalogue (EWC)
Container 15 01 06 mixed packaging
Special precautions : This material and its container must be disposed of in a safe way. Empty containers or
liners may retain some product residues. Avoid dispersal of spilt material and runoff
and contact with soil, waterways, drains and sewers.
14. Transport information

ADR/RID ADN IMDG IATA
14.1 UN number Not regulated. 9006 Not regulated. Not regulated.
or ID number
14.2 UN proper - ENVIRONMENTALLY - -
shipping name HAZARDOUS
SUBSTANCE, LIQUID,
N.O.S.
14.3 Transport - 9 - -
hazard class(es)
14.4 Packing - - - -
group
14.5 No. Yes. No. No.
Environmental
hazards

2020/878
14. Transport information

Marine pollutant Not applicable. Not applicable. Not applicable. Not applicable.
substances
Additional information
ADR/RID : None identified.
ADN : The product is only regulated as a dangerous good when transported in tank vessels.
IMDG : None identified.
IATA : None identified.
14.6 Special precautions for : Transport within user’s premises: always transport in closed containers that are
user upright and secure. Ensure that persons transporting the product know what to do in
the event of an accident or spillage.
14.7 Maritime transport in : Not applicable.

bulk according to IMO
instruments
SECTION 15: Regulatory information

15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
EU Regulation (EC) No. 1907/2006 (REACH)
Annex XIV - List of substances subject to authorisation
Annex XIV
None of the components are listed.
Substances of very high concern
None of the components are listed.
Annex XVII - Restrictions : Not applicable.
on the manufacture,
placing on the market
and use of certain
dangerous substances,
mixtures and articles
Ozone depleting substances (1005/2009/EU)
Not listed.
VOC for Ready-for-Use : IIA/a. Interior matt walls and ceilings (Gloss <25@60°). EU limit values: 30 g/l (2010.)
Mixture This product contains a maximum of 10 g/l VOC.
Seveso Directive
This product is not controlled under the Seveso Directive.
Biocidal products regulation : Contains a biocidal product; C(M)IT/MIT (3:1)
National regulations
Denmark – Cancer risks : National Working Environment Authorities Ordinance on Measures to Prevent Cancer
Risks during Work with Substances and Preparations is applicable.
MAL-code : 00-3

2020/878
SECTION 15: Regulatory information

Protection based on MAL : According to the regulations on work involving coded products, the following
stipulations apply to the use of personal protective equipment:
General: Gloves must be worn for all work that may result in soiling. Apron/coveralls/
protective clothing must be worn when soiling is so great that regular work clothes do
not adequately protect skin against contact with the product. A face shield must be worn
in work involving spattering if a full mask is not required. In this case, other
recommended use of eye protection is not required.
In all spraying operations in which there is return spray, the following must be worn:
respiratory protection and arm protectors/apron/coveralls/protective clothing as
appropriate or as instructed.
MAL-code: 00-3
Application: During downtimes, cleaning and repair in closed facilities, spray booths or
cabins, if there is a risk of contact with wet paint or organic solvents. When using
scraper or knife, brush, roller, etc, for pre- and post-treatments in cabins or booths of
the existing* facility type, if the operator is inside the spray zone.
- Coveralls must be worn.
When spraying in existing* spray booths, if the operator is outside the spray zone.
- Arm protectors and apron must be worn.
During all spraying where atomisation occurs in cabins or spray booths where the
operator is inside the spray zone and during spraying outside a closed facility, cabin or
booth.
- Air-supplied full mask, coveralls and hood must be worn.
Drying: Items for drying/drying ovens that are temporarily placed on such things as
rack trolleys, etc, must be equipped with a mechanical exhaust system to prevent fumes
from wet items from passing through workers' inhalation zone.
Polishing: When polishing treated surfaces, a mask with dust filter must be worn.
When machine grinding, eye protection must be worn. Work gloves must always be
worn.
Caution The regulations contain other stipulations in addition to the above.
*See Regulations.
Restrictions on use : Not to be used by professional users below 18 years of age. See the National Working
Environment Authorities Executive Order regarding Young People At Work.
List of undesirable : Not listed
substances
Carcinogenic waste : Waste containers must be labeled: Contains a substance or substances regulated by
Danish working environment legislation on cancer risks.
15.2 Chemical safety : No Chemical Safety Assessment has been carried out.
assessment

2020/878
SECTION 16: Other information

Indicates information that has changed from previously issued version.
Abbreviations and acronyms
ATE = Acute Toxicity Estimate
CLP = Classification, Labelling and Packaging Regulation [Regulation (EC) No. 1272/2008]
DNEL = Derived No Effect Level
EUH statement = CLP-specific Hazard statement
PNEC = Predicted No Effect Concentration
RRN = REACH Registration Number
PBT = Persistent, Bioaccumulative and Toxic
vPvB = Very Persistent and Very Bioaccumulative
ADR = The European Agreement concerning the International Carriage of Dangerous Goods by Road
ADN = European Provisions concerning the International Carriage of Dangerous Goods by Inland Waterway
IMDG = International Maritime Dangerous Goods
IATA = International Air Transport Association
Procedure used to derive the classification according to Regulation (EC) No. 1272/2008 [CLP/GHS]
Classification Justification
Not classified.
Full text of abbreviated H statements

H301 Toxic if swallowed.
H302 Harmful if swallowed.
H310 Fatal in contact with skin.
H314 Causes severe skin burns and eye damage.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
H330 Fatal if inhaled.
H361 Suspected of damaging fertility or the unborn child.
H400 Very toxic to aquatic life.
H410 Very toxic to aquatic life with long lasting effects.
H411 Toxic to aquatic life with long lasting effects.
EUH071 Corrosive to the respiratory tract.
Full text of classifications [CLP/GHS]
Acute Tox. 2 ACUTE TOXICITY - Category 2
Aquatic Acute 1 SHORT-TERM (ACUTE) AQUATIC HAZARD - Category 1
Aquatic Chronic 1 LONG-TERM (CHRONIC) AQUATIC HAZARD - Category 1
Aquatic Chronic 2 LONG-TERM (CHRONIC) AQUATIC HAZARD - Category 2
Eye Dam. 1 SERIOUS EYE DAMAGE/EYE IRRITATION - Category 1
Repr. 2 REPRODUCTIVE TOXICITY - Category 2
Skin Corr. 1C SKIN CORROSION/IRRITATION - Category 1C
Skin Irrit. 2 SKIN CORROSION/IRRITATION - Category 2
Skin Sens. 1 SKIN SENSITISATION - Category 1
Skin Sens. 1A SKIN SENSITISATION - Category 1A
History
Date of issue/ Date of : 16 February 2023
revision
Date of previous issue : 30 June 2022
Prepared by : EHS
Version : 2.08

2020/878
SECTION 16: Other information

Disclaimer
The information contained in this data sheet is based on present scientific and technical knowledge. The purpose of this
information is to draw attention to the health and safety aspects concerning the products supplied by us, and to
recommend precautionary measures for the storage and handling of the products. No warranty or guarantee is given in
respect of the properties of the products. No liability can be accepted for any failure to observe the precautionary
measures described in this data sheet or for any misuse of the products.

Document Search Inner Frame

Uploaded by

Copyright:

Available Formats

Document Search Inner Frame

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Document Search Inner Frame

Uploaded by

Copyright:

Available Formats

Conforms to Regulation (EC) No.

1907/2006 (REACH), Annex II, as amended by Commission Denmark

SAFETY DATA SHEET

SECTION 1: Identification of the substance/mixture and of the company/

1.3 Details of the supplier of the safety data sheet

e-mail address of person : Product.Stewardship.EMEA@ppg.com

1.4 Emergency telephone number

English (GB) Denmark 1/15

SECTION 2: Hazards identification

2.2 Label elements

2.3 Other hazards

English (GB) Denmark 2/15

SECTION 3: Composition/information on ingredients

3.2 Mixtures : Mixture

SECTION 4: First aid measures

English (GB) Denmark 3/15

SECTION 4: First aid measures

SECTION 5: Firefighting measures

5.2 Special hazards arising from the substance or mixture

5.3 Advice for firefighters

English (GB) Denmark 4/15

SECTION 6: Accidental release measures

6.3 Methods and material for containment and cleaning up

SECTION 7: Handling and storage

7.3 Specific end use(s)

English (GB) Denmark 5/15

SECTION 8: Exposure controls/personal protection

8.2 Exposure controls

English (GB) Denmark 6/15

SECTION 8: Exposure controls/personal protection

SECTION 9: Physical and chemical properties

9.1 Information on basic physical and chemical properties

SECTION 9: Physical and chemical properties

Evaporation rate : Not available.

SECTION 10: Stability and reactivity

10.2 Chemical stability : The product is stable.

SECTION 11: Toxicological information

English (GB) Denmark 8/15

SECTION 11: Toxicological information

English (GB) Denmark 9/15

SECTION 11: Toxicological information

SECTION 12: Ecological information

12.2 Persistence and degradability

Product/ingredient name Aquatic half-life Photolysis Biodegradability

12.3 Bioaccumulative potential

12.4 Mobility in soil

12.5 Results of PBT and vPvB assessment

12.6 Endocrine disrupting properties

English (GB) Denmark 10/15

SECTION 12: Ecological information

12.7 Other adverse effects

SECTION 13: Disposal considerations

14. Transport information

English (GB) Denmark 11/15

14. Transport information

14.7 Maritime transport in : Not applicable.

SECTION 15: Regulatory information

English (GB) Denmark 12/15

SECTION 15: Regulatory information