Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Vertical Mixer

Download as pdf or txt
Download as pdf or txt
You are on page 1of 5

Vertical Agitator

KISAN MACHINERY INC


AGST - Standard Agitator / Flange Type
Coupling method is the Flange (Bolt mounting) has become the installation to easy.
Gear make to use MC Nylon and polishing .So the noise is small.
Depending on the application to be rotating of the agitator can be selected.
The mass production of standardized parts, complete systems affordable and to ensure prompt delivery.

Dimension Table (단위 : mm)

Moter Power Mixing Shaft Impeller Weight


Model NO. RPM H1 H2 OD BCD N-Z t
kW HP d L(max) D (kg)

350
AGST-002 0.18 1/4 20 800 120-500 345 370 140 120 4-10 10 23
300
AGST-005 0.4 1/2 240 20 1400 200-700 430 465 170 150 4-12 12 30
AGST-01 0.75 1 180 25 1700 250-800 465 500 200 170 4-12 14 35
AGST-02 1.5 2 120 30 2200 300-1000 615 660 230 200 6-12 17 55
AGST-03 2.2 3 90 30 2500 350-1100 660 720 260 220 6-13 17 70
AGST-05 3.75 5 60 35/40 2800 400-1200 650 710 300 260 6-18 22 90

AGST-08 5.5 7.5 -40 40/50 3200 450-1500 740 800 345 305 6-23 25 120

To improve the performance of the dimensions are subject to change.


AGGT - Large Agitator/Medium-Low Speed Type

Manner as made to order the production in response to various agitation conditions is possible.
Reducer is Gear / Cyclo / Worm such as variety of formats to choose from, Transmission Gear Box can also
be converted to the speed of the mounting
Mounting Flange standard of JIS (10kg / ㎠) Code is compatible with the enhanced standardization.
Under the terms of the agitated tank inside the Mechanical Sea / Gland Packing / Water Seal / Cap Seal
Sealing System to see the variety can be mounted.
Heavy-duty design of the high viscosity of large large tank / agitation tank / storage tank as a suitable
stirring device
AGGT - Large Agitator/Medium-Low Speed Type

AGGM Model NO. (Frame) the Mixing Shaft (Shaft) is determined by.
(AGGM, AGDM, AGSM series the same)
- Model No. Selection Example
AGGT-05-D060
형식 마력 축경

Ratio 5:1 7.5 : 1 10 : 1 15 : 1 20 : 1 30 : 1 45 : 1 60 : 1 90 : 1

Reducer Type 6:1 8:1 11 : 1 15 : 1 21 : 1 29 : 1 43 : 1 59 : 1 87 : 1

Gear REducer 360 240 180 120 90 60 40 30 20

Cyclo Reducer 300 225 164 120 86 62 42 31 21

Dimension Table (unit : mm)

Moter Power Mixing Shaft Impeller


Model NO. H1 H2 H3 FD OD BCD N-Z
kW HP d L(max) L1 D

AGGM-ㅁㅁ-D030 30 ~1200 200 200~500 240 505 730 100 330 290 6-23

AGGM-ㅁㅁ-D040 0.4~2.2 1/2~3 40 ~1500 200 250~700 240 505 730 125 330 290 6-23

AGGM-ㅁㅁ-D050 50 ~2000 200 300~1000 240 505 730 145 330 290 6-23

AGGM-ㅁㅁ-D060 0.75~5.5 1~7.5 60 ~2500 250 350~1200 260 545 785 170 400 355 6-25

AGGM-ㅁㅁ-D070 70 ~3200 300 350~1500 300 645 925 200 445 400 8-25
1.5~11 3~15
AGGM-ㅁㅁ-D080 80 ~3500 300 350~1800 300 645 925 220 445 400 8-25

AGGM-ㅁㅁ-D090 3.75~15 5~20 90 ~3800 350 400~2200 347 752 1077 260 490 445 8-25

AGGM-ㅁㅁ-D100 100 ~4000 400 450~2500 405 825 1205 300 560 510 12-27
7.5~22 10~30
AGGM-ㅁㅁ-D110 110 ~4200 400 450~2500 405 825 1205 330 560 510 12-27

AGGM-ㅁㅁ-D120 120 ~4500 450 500~2800 455 930 1360 345 620 565 16-27
7.5~45 10~60
AGGM-ㅁㅁ-D130 130 ~4500 450 500~3000 455 930 1360 355 620 565 16-27

Frame by Motor Power is subject to change.


Impeller Dia. "D" dimensions are changes may
Mixing Shaft of the "L" dimensions Stabilizer FIN (RING) and Foot Bearing will be adjusted upward depending on
whether or not the mounting.? Support Frame of "H2/H3" reducer type and dimensions of Mechanical Seal,
there may be some differences ..
KDM– DISK Type

Production method of an order corresponding to the


production conditions of the reaction tank is possible.

Gear reducer low speed operation of the reactor and


the agitator is suitable.

Installation location of the impeller installed in the


bottom of the tank bottom to minimize sediment flow
rate can be increased.

○ Applications
- Anaerobic / anoxic / aerobic stirring
- Abandon the system was stirred and mixed use
- Flow adjustment tank / sludge storage tank for
agitated
- Water treatment flocculation / sedimentation stirring
- Pure oxygen stirring
- Liquid manure treatment facilities / chemical
industries / paper industry
- Food industry / Biotechnology and Pharmaceutical
Industry

Dimension Table (unit: mm)

Model NO. impeller kW RPM shaft diameter Capacity (m3) Shaft length

KDM-005-1000 1000 0.37 ~ 45 65A ~100

KDM-005-1500 1500 0.37 ~ 24 80A ~100

KDM-010-1500 1500 0.75 ~ 30 80A ~200

KDM-020-1500 1500 1.5 ~ 35 80A ~300

KDM-020-2000 2000 1.5 ~ 24 100A ~500


Customized
on-site
KDM-030-2000 2000 2.2 ~ 28 100A ~400

KDM-050-2000 2000 3.7 ~ 32 100A ~300

KDM-030-2300 2300 2.2 ~ 22 100A ~500

KDM-050-2300 2300 3.7 ~ 25 100A ~600

KDM-075-2300 2300 5.5 ~ 30 100A ~700

specifications can be changed to improve performance and tank the size


Should establish more than 2 arounds if tank specific activity is aspect ratio more than 2 times.

You might also like