RRU3931E 1.8G+2.1G Technical Description (For VIVO)

RRU3931E
V100R012C10
Description
Issue 01
Date 2017-06-13
HUAWEI TECHNOLOGIES CO., LTD.

Copyright © Huawei Technologies Co., Ltd. 2017. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior
written consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees or
representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: support@huawei.com
Issue 01 (2017-06-13) Huawei Proprietary and Confidential i

Copyright © Huawei Technologies Co., Ltd.
RRU3931E
Description Contents
Contents
1 Introduction.................................................................................................................................... 1
1.1 Appearance ................................................................................................................................................................... 1
1.2 Physical Ports ............................................................................................................................................................... 2
2 Technical Specifications .............................................................................................................. 4

2.1 Frequency Band ............................................................................................................................................................ 4
2.2 Capacity ........................................................................................................................................................................ 5
2.3 Receiver Sensitivity ...................................................................................................................................................... 5
2.4 Typical Output Power ................................................................................................................................................... 5
2.5 Power Consumption...................................................................................................................................................... 9
2.6 Power Supply ................................................................................................................................................................ 9
2.7 Equipment Specifications ............................................................................................................................................. 9
2.8 CPRI Port Specifications .............................................................................................................................................. 9
2.9 Environment Specifications ........................................................................................................................................ 10
3 Acronyms and Abbreviations ................................................................................................... 12
Issue 01 (2017-06-13) Huawei Proprietary and Confidential ii

RRU3931E
Description 1 Introduction
1 Introduction
The RRU3931E is a type of low-power RRU. It applies to continuous coverage solutions for
micro base stations in high traffic hotspots. The RRU3931E features characteristics such as
easy site acquisition and easy deployment. In addition, multiple RRU3931Es can be combined
to form a multimode RRU. With the Software Defined Radio (SDR) technology, the
RRU3931E can work either in UL dual-mode through software configuration modification.
1.1 Appearance
1.2 Physical Ports
1.1 Appearance
Figure 1-1 shows the appearance of an RRU3931E.
Figure 1-1 Appearance of the RRU3931E
Issue 01 (2017-06-13) Huawei Proprietary and Confidential 1

RRU3931E
1.2 Physical Ports

The RRU3931E has a modular structure. Its external ports are located at the bottom of the
module or in the cabling cavity.
Figure 1-2 Ports on the RRU3931E
(1) (2) (3) (4)

RRU3931E
(5) Ground terminal (6) PWR (7) CPRI0 (8) CPRI1
Table 1-1 RRU ports
Port Description
PWR Power input port

CPRI0 Optical port
CPRI1 Optical port
Ports used to transmit and receive RF signals
, , ,
Ground terminal
A BBU and RRU3931E are connected through a CPRI port using an optical cable to transmit
CPRI signals to meet the requirements of radio network deployment.

RRU3931E
Description 2 Technical Specifications
2 Technical Specifications
2.1 Frequency Band

2.2 Capacity
2.3 Receiver Sensitivity
2.4 Typical Output Power
2.5 Power Consumption
2.6 Power Supply
2.7 Equipment Specifications
2.8 CPRI Port Specifications
2.9 Environment Specifications
2.1 Frequency Band

Frequency band
Frequency RX Frequency TX Frequency Mode IBW (MHz)

Band (MHz) Band (MHz) Band (MHz)
1800 1710～1785 1805～1880 LTE FDD 40
2100 1920～1980 2110～2170 UMTS，LTE 40

FDD，UL

RRU3931E
2.2 Capacity
Table 2-1 Capacity
Mode Capacity
UMTS A maximum of four UMTS carriers can be

configured on a single band.
LTE FDD A maximum of two LTE carriers can be
configured on a single band.
UL A maximum of two UMTS carriers and one
LTE carrier can be configured on a single
band.
2.3 Receiver Sensitivity

Table 2-2 Receiver Sensitivity
Mode Frequency Band 1-Way Receiver 2-Way Receiver

(MHz) Sensitivity (dBm) Sensitivity (dBm)
UMTS 2100 -123 dBm -125.8 dBm

LTE 1800/2100 -103 dBm -105.8 dBm
 The receiver sensitivity of UMTS, as recommended in 3GPP TS 25.104, is measured at the antenna
connector on the condition that the channel rate is 12.2 kbit/s and the BER is not higher than 0.001.
 The receiver sensitivity of LTE is measured, as recommended in 3GPP TS 36.104, under a 5 MHz
channel bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
2.4 Typical Output Power

The output power per carrier in the output power table provides the maximum output power possible
while ensuring the network performance.
A x B in the Output Power column indicates that this RF module is configured with A transmit channels
and the maximum output power of each transmit channel is B W.
Table 2-3 Typical output power (1800 MHz，LTE FDD)
Carrier Number of Output Power per LTE bandwidth (MHz)

Configuration LTE Carriers LTE Carrier (W)
1L 1 (MIMO) 2*5 5，10，15，20

RRU3931E

(single-band)
2L 2 (MIMO) 2*2.5 5，10，15，20
(single-band)
2L (dual-band) 1 (MIMO) 2*5 5，10，15，20
3L (dual-band) 2 (MIMO) 2*2.5 5，10，15，20
3L (dual-band) 1 (MIMO) 2*5 5，10，15，20
4L (dual-band) 2 (MIMO) 2*2.5 5，10，15，20
Table 2-4 Typical output power (2100 MHz，LTE FDD)

1L 1（MIMO） 2*5 5，10，15，20
(single-band)
2L 2（MIMO） 2*2.5 5，10，15，20
(single-band)
2L (dual-band) 1（MIMO） 2*5 5，10，15，20
3L (dual-band) 1（MIMO） 2*5 5，10，15，20
3L (dual-band) 2（MIMO） 2*2.5 5，10，15，20
4L (dual-band) 2（MIMO） 2*2.5 5，10，15，20
Table 2-5 Typical output power (2100 MHz, LTE FDD)

1L 1 (MIMO) 2*5 5，10，15，20
(single-band)
2L 2 (MIMO) 2*2.5 5，10，15，20
(single-band)
2L (dual-band) 1 (MIMO) 2*5 5，10，15，20
3L (dual-band) 1 (MIMO) 2*5 5，10，15，20
3L (dual-band) 2 (MIMO) 2*2.5 5，10，15，20
4L (dual-band) 2 (MIMO) 2*2.5 5，10，15，20

RRU3931E
Table 2-6 Typical output power (2100 MHz, UMTS)
Carrier Number of Output Power per UMTS bandwidth

Configuration UMTS UMTS Carrier (W) (MHz)
Carriers
1U 1 (non-MIMO) 5 5
(single-band)
1U 1 (MIMO) 2*5 5
(single-band)
2U 2 (non-MIMO) Configured in two 5
(single-band) PAs: 5
2U 2 (MIMO) 2*2.5 5
(single-band)
(single-band) PAs: 2.5
3U 3 (MIMO) 2*1.7 5
(single-band)
(single-band) PAs: 2.5
4U 4 (MIMO) 2*1.25 5
(single-band)
Table 2-7 Typical output power (2100 MHz, UL)
Number of Number of Output Output UMTS LTE

UMTS LTE Power per Power per bandwidth bandwidth
Carriers Carriers UMTS LTE (MHz) (MHz)
Carrier (W) Carrier (W)
2 1 (MIMO) Configured 2*2.5 5 5，10，15，
(non-MIMO in two PAs: 20
) 2.5
2 (MIMO) 1 (MIMO) 2*1.7 2*1.7 5 5，10，15，
20
Table 2-8 Typical output power (1800 MHz+2100 MHz, UL)

2100 MHz: 1800 MHz: Configured 2*5 5 5，10，15，
2 1 (MIMO) in two PAs:

RRU3931E

(non-MIMO 5 20
)
2100 MHz: 1800 MHz: 2*2.5 2*5 5 5，10，15，
2 (MIMO) 1 (MIMO) 20
3 1 (MIMO) in two PAs: 20
(non-MIMO 2.5
)
2100 MHz: 1800 MHz: 2*1.7 2*5 5 5，10，15，
(non-MIMO 2.5
)
2100 MHz: 1800 MHz: 2*1.25 2*5 5 5，10，15，
2100 MHz: 1800 MHz: Configured 1800 MHz: 5 5，10，15，
2 1 (MIMO) in two PAs: 2*5 20
(non-MIMO 2100 MHz: 2.5 2100 MHz:
) 1 (MIMO) 2*2.5
2100 MHz: 1800 MHz: 2*1.7 1800 MHz: 5 5，10，15，
2 (MIMO) 1 (MIMO) 2*5 20
2100 MHz: 2100 MHz:
1 (MIMO) 2*1.7
2100 MHz: 1800 MHz: Configured 2*2.5 5 5，10，15，
(non-MIMO 5
)
2100 MHz: 1800 MHz: 2*2.5 2*2.5 5 5，10，15，
2100 MHz: 1800 MHz: Configured 2*2.5 5 5，10，15，
(non-MIMO 2.5
)
2100 MHz: 1800 MHz: 2*1.25 2*2.5 5 5，10，15，

RRU3931E
2.5 Power Consumption

Table 2-9 RRU3931E Power consumption
Output Power (W) Typical Power Maximum Power

Consumption (W) Consumption (W)
2x2x5 130 150
2.6 Power Supply

Table 2-10 Power supply
Item Specifications
Input power 220 V/110 V AC, voltage range: 90 V AC

to 290 V AC
2.7 Equipment Specifications

Table 2-11 Equipment specifications
Item Specifications
Dimensions (H x W x D) 290 mm x 300 mm x 82 mm (7.1 L, without

antennas)
290 mm x 300 mm x 130 mm (11.3 L, with
antennas)
Weight 9 kg (without antennas)
11 kg (with antennas)
2.8 CPRI Port Specifications

Table 2-12 CPRI port specifications
Item Specifications
Number of CPRI ports 2
CPRI port data rate 2.5Gbit/s, 4.9 Gbit/s , or 9.8 Gbit/s

RRU3931E
Item Specifications
Topology Star, chain , or ring
Cascading capability 6
Maximum distance UMTS: 40km
between the BBU LTE FDD/UL: The maximum distances of the RRUs from the
BBU vary with the types of BBP in LTE mode as follows:
 20 km when the LBBPc, LBBPd1, or UBBPd3 is configured
 40 km when the LBBPd2 or UBBPd4 is configured
 When the LBBPd3, UBBPd5, or UBBPd6 is configured:
 40 km when the cell quantity is less than or equal to 3
 20 km when the cell quantity is greater than or equal to 4
2.9 Environment Specifications

Table 2-13 Environment specifications
Item Specifications
Operating temperature –40°C to +45°C (with solar radiation)
–40°C to +50°C (without solar radiation)
Relative humidity 5% RH to 95% RH
Absolute humidity 1 g/m3 to 30 g/m3
Atmospheric pressure 70 kPa to 106 kPa
Operating Environment Compliance standards:
 3GPP TS 36.141
 ETSI EN 300019-1-4 V2.1.2 (2003-04)
Class 4.1: "Non-weather protected
locations."
Shockproof protection NEBS GR63 zone4
Ingress Protection (IP) rating IP65
ETL Conforms to UL STD.60950-1 & UL
STD.60950-22 CERTIFIED TO CAN/CSA
STD.C22.2 NO.60950-1-07 & CAN/CSA
STD.C22.2 NO.60950-22-07
The follow figure shows the identity of
ETL:

RRU3931E
Item Specifications

RRU3931E
Description 3 Acronyms and Abbreviations
3 Acronyms and Abbreviations
Table 3-1 Acronyms and abbreviations

Acronym and Full Name
Abbreviation
BBU Baseband Unit

CPRI Common Public Radio Interface
RRU Remote Radio Unit


RRU3931E 1.8G+2.1G Technical Description (For VIVO)

Uploaded by

Copyright:

Available Formats

RRU3931E 1.8G+2.1G Technical Description (For VIVO)

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

RRU3931E 1.8G+2.1G Technical Description (For VIVO)

Uploaded by

Copyright:

Available Formats

RRU3931E

HUAWEI TECHNOLOGIES CO., LTD.

Trademarks and Permissions

Huawei Technologies Co., Ltd.

Issue 01 (2017-06-13) Huawei Proprietary and Confidential i

2 Technical Specifications .............................................................................................................. 4

3 Acronyms and Abbreviations ................................................................................................... 12

Issue 01 (2017-06-13) Huawei Proprietary and Confidential ii

Figure 1-1 Appearance of the RRU3931E

Issue 01 (2017-06-13) Huawei Proprietary and Confidential 1

1.2 Physical Ports

Figure 1-2 Ports on the RRU3931E

(1) (2) (3) (4)

Issue 01 (2017-06-13) Huawei Proprietary and Confidential 2

(5) Ground terminal (6) PWR (7) CPRI0 (8) CPRI1

Table 1-1 RRU ports

PWR Power input port

Issue 01 (2017-06-13) Huawei Proprietary and Confidential 3

2.1 Frequency Band

2.1 Frequency Band

Frequency RX Frequency TX Frequency Mode IBW (MHz)

1800 1710～1785 1805～1880 LTE FDD 40

2100 1920～1980 2110～2170 UMTS，LTE 40

Issue 01 (2017-06-13) Huawei Proprietary and Confidential 4

UMTS A maximum of four UMTS carriers can be

2.3 Receiver Sensitivity

Mode Frequency Band 1-Way Receiver 2-Way Receiver

UMTS 2100 -123 dBm -125.8 dBm

2.4 Typical Output Power

Table 2-3 Typical output power (1800 MHz，LTE FDD)

Carrier Number of Output Power per LTE bandwidth (MHz)

Issue 01 (2017-06-13) Huawei Proprietary and Confidential 5

Carrier Number of Output Power per LTE bandwidth (MHz)

3L (dual-band) 2 (MIMO) 2*2.5 5，10，15，20

3L (dual-band) 1 (MIMO) 2*5 5，10，15，20

4L (dual-band) 2 (MIMO) 2*2.5 5，10，15，20

Table 2-4 Typical output power (2100 MHz，LTE FDD)

Carrier Number of Output Power per LTE bandwidth (MHz)

3L (dual-band) 1（MIMO） 2*5 5，10，15，20

3L (dual-band) 2（MIMO） 2*2.5 5，10，15，20

4L (dual-band) 2（MIMO） 2*2.5 5，10，15，20

Table 2-5 Typical output power (2100 MHz, LTE FDD)

Carrier Number of Output Power per LTE bandwidth (MHz)

3L (dual-band) 1 (MIMO) 2*5 5，10，15，20

3L (dual-band) 2 (MIMO) 2*2.5 5，10，15，20

4L (dual-band) 2 (MIMO) 2*2.5 5，10，15，20

Issue 01 (2017-06-13) Huawei Proprietary and Confidential 6

Table 2-6 Typical output power (2100 MHz, UMTS)

Carrier Number of Output Power per UMTS bandwidth

Table 2-7 Typical output power (2100 MHz, UL)

Number of Number of Output Output UMTS LTE

Table 2-8 Typical output power (1800 MHz+2100 MHz, UL)

Issue 01 (2017-06-13) Huawei Proprietary and Confidential 7

Number of Number of Output Output UMTS LTE

Issue 01 (2017-06-13) Huawei Proprietary and Confidential 8

2.5 Power Consumption

Output Power (W) Typical Power Maximum Power

2x2x5 130 150

2.6 Power Supply

Input power 220 V/110 V AC, voltage range: 90 V AC