Spec Tech Industrial Electric www.spectechind.

com 888-773-2832
7250 Series

7250X Digital Stik Sensor Data Sheet

Proven Magnetostrictive Sensing Performance

in a Revolutionary New Package
The 7250X Digital Stik takes f eld proven allows for very high resolution on a low
magnetostrictive sensing technology power budget. The resolution of the 7250X
and packages it in a revolutionary new is 0.0001” with a linearity of 0.01% (See
way for greater reliability and easier specif cations).
installation and mounting. It is ideal for
liquid level monitoring, interface level and Factory Mutual (FM) certif ed that the
leak detection in a variety of liquid media 7250X Digital Stik is Intrinsically Safe for
in both above ground and underground use in ethylene and propane (petroleum)
storage tanks. applications (See specif cations). The
7250X has been approved to the following
The 7250X Digital Stik combines low standards:
power consumption with a patented high
resolution design. It requires only 5 volts CSA C22.2 Nos. 25,142,157 and 213
DC making it ideal for mobile, battery FM 3600, 3610, 3611 and 3810
operated and wireless applications. Cenelec EN 50014, 50020 and 50284

The system has been designed to meet The 7250X has an inherently lower cost
EPA Leak Detection and API Inventory design which results in savings. It provides
Monitoring requirements and has the same performance and reliability
been approved for use in hazardous as sensors that consume more power.
environments. Combining low power requirements with
high resolution provides the ultimate
The sensor’s electronics are SMT performance and reliability.
components and integrated into a 5/8”
Specifications
diameter sensing tube. This breakthrough
design eliminates the bulky electronics Power Supply
+5 VDC ± 10% typical (+3.7 VDC min.)
Probe Length
21” to 288”
Voltage Stainless Steel R Style
enclosure at the top of the sensor and
offers greater options for insertion and Current (at +5 VDC) 10mA max. (8mA typical) plus Stainless Steel D, S, M Style 20” to 288”
1.5mA max. (1mA typical) per temperature
mounting. sensor (Probes available in 1” increments) Consult Factory for
longer lengths
The probe is constructed of 316 Stainless Operating Temperature Hazardous Areas Approvals
Steel and comes with a variety of Sensing Area -40°C to 100°C (Non Hazardous Location)
-40°C to 70°C (Hazardous Location) FM
connectors, including a mini connector -40° O Tamb O 70° C
for quick connect applications, a single Electronics Area -40°C to 70°C Class I, II, III, Div. 1
3/4” NPT that can be used with a Steel Probe: 1000 psi max. Groups C, D, E, F, G, T4
Pressure Rating Class I, Div. 2
Float: Dependent. Call Factory.
compression f tting, a double 3/4” NPT for Groups A, B, C, D, T4
Resolution 0.0001” (Protocol Dependent)
mounting with a f ange or bushing, and a Class I, Zone 0, AEx ia IIB T4
Equal to Resolution
1/2” right angle for use in low overhead Repeatability
ATEX
applications. Linearity Probes up to 288”: ± 0.01% of span Ex ia IIB T4
or ± 0.015”, whichever is greater.
NEMKO 05 ATEX 1219X
Hysteresis Probes up to 288”: ± 0.002% of span
The 7250 communicates through a or ± 0.005”, whichever is greater. 0344 II 1G
single signal. The data is transmitted via Null Zone R Style: 9”
asynchronous serial communications D, S and M Style: 8” Sanitary Approvals
2”
and is offered with serial protocol options Dead Band
(3A 74-03)
including an ASCII format. There are Intrinsically Safe Barrier See Installation Drawing E0241200.
Consult Factory.
other options available to OEMs for use
Enclosure Material 316 Stainless Steel IP68
in developing a communications interface Rating
with the probe. The patented design Specifications are subject to change without notice. Patented.

AUTOMATION & PROCESS TECHNOLOGIES

Spec Tech Industrial Electric www.spectechind.com 888-773-2832

 Spec Tech Industrial Electric www.spectechind.com 888-773-2832

7250X Digital Stik Stainless Steel Sensor

Part Numbering

725 0 X M LLL RX F1 XXX X XX

7250 Style/Material Number of Temp Points # of Floats Mounting Style

Digital Stik X = 316 Stainless Steel R1 = 1 Sensor,18”* F1 = 1 Float X = None
Consult factory for other R5 = 5 Sensors F2 = 2 Floats
options. T1 = 1 Sensor, 4”*
*From the bottom of the probe.

Output Protocol Connector Style Overall Length Special Mounting

2 = 25 level readings M = 4 Pin Mini Span In 1” increments XX = None
5 = 10 level readings R = 1/2” NPT Right Angle In 1” increments i.e. 072 = 72”
D = 3/4” NPT Dual i.e. 072 = 72” (Min 8” Max 278”. Max (Min 18” Max 288”)
S = 3/4” NPT Single span is equal to overall length -10)

Dimension Drawing

MMConnector
STYLE

OVERALL LENGTH (O.A.L.)

7/8-16 UNS-2A

1.00 .625

2.00"
8.00" NULL ZONE TEMPERATURE SPAN DEAD
BAND

Accessories Wiring Diagram

Item Part Number
Float Kit, 316 SS, 2.05” Diameter w/ E Clip and Spacer 0.54s.g. SD0515000
Common
Float Kit, Nitrophyl, 2.02” Diameter w/ E Clip and Spacer 0.40s.g. SD0536500 (Black wire) Drain
(Cable Shield, chassis
Cable Assembly, 4 pin, 6 feet long (M style only) 01533141 1 4 gorund on ss housing
probes)
Adjustable Tube Coupling 5/8” x 3/4” NPT 04283800
2 3
Junction Box, side mount, N4X with zero & span push buttons SD0536101 Data Signal
(White wire) Power
Bushing, 3/4” x 2” NPT 316SS 04587241 (Red wire)

Connector View
Intrinsically Safe Entity Parameters Contact Factory for additional drawings.

Vmax Imax PI CI LI
7.93 V 280mA 1.0 W 30.1μF 0μH

® 1080 N. Crooks Road, Clawson, MI 48017-1097

7250X.D5
7250X.D5R
Phone: 248.435.0700 Toll Free: 800.635.0289 Fax: 248.435.8120 www.ametekapt.com .Z193
05/12.Z193
AUTOMATION & PROCESS TECHNOLOGIES Copyright 2011 by AMETEK Automation & Process Technologies. All Rights Reserved.

Spec Tech Industrial Electric www.spectechind.com 888-773-2832