V32.

35

Yealink Network Technology CO., LTD

Yealink MVC800&MVC500 for Microsoft Teams Rooms System
Quick Start Guide(V1.1)
Package Contents
MVC800 Package

UVC80 MShare MTouch

(Camera) (Screen Sharing) (Touch Console)

Mini-PC Package MSpeaker VCM34×2

(Mini-PC and Mini-PC Box) (Soundbar) (Microphone)

MVC500 Package

UVC50 MShare MTouch

(Camera) (Screen Sharing) (Touch Console)

Wireless Microphone

Mini-PC Package MSpeaker CPW90 Package

(Mini-PC and Mini-PCBox) (Soundbar) (CPW90×2 and DD10)

We recommend that you use the accessories provided or approved by Yealink. The use of
unapproved third-party accessories may result in poor performance.
The minor lists like cables are in the separate package of the corresponding accessory.

1
MVC800&500 Connection
The connection of MVC500 is almost the same as that of MVC800.
The following is an example of connecting MVC800.

3.5mm

MSpeaker UVC80

CAT5e

USB2.0

HDMI Display
Display HDMI

The Back of Mini-PC The Front of Mini-PC

HDMI HDMI

Ethernet
Cable
USB2.0
VCM34
MShare Type-B

VCM34

MTouch

You can use VCM34 or CPW90 as microphone.

For convenience, we recommend that you connect a wireless USB dongle to the back of the mini-PC to use mouse and keyboard to
manage devices.
For more information about the installation and deleployment of accessories (for example, the installation of mini-PC package or
UVC80 camera), refer to the Quick Start Guide of corresponding accessory.

Wireless Sharing
You can use Yealink WPP20 wireless presentation pod for wireless content sharing. WPP20 needs to
be purchased separately.
Make sure the MShare is connected to the Mini-PC.
Procedure
1. Connect the WPP20 to the USB port of the MShare.
2. Wait for about 3 seconds, the WPP20 LED indicator glows WPP20
PC Wireless Presentation Pod
solid green.
The WPP20 is paired with the MShare successfully.
3. Connect the WPP20 to the PC.
2
Upgrading System Software through Windows Update
The system software(including the Windows, the UVC80/UVC50, the MTouch and the MShare)
can be automatically upgraded via windows update by default. Otherwise, you can enable
automatically windows update or upgrade the devices manually.

Enabling Automatically Windows Update

1. On the display screen, navigate to ->Settings.
2. Enter the administrator password (default: sfb) to access Setup screen.
3. Navigate to Windows Settings->Go to Admin Sign-in.
4. Select Administrator from the bottom-left corner and then enter the administrator password
(default: sfb).
5. Tap the Start button, and then go to Settings->Upgrade & Security->Windows Update, and
select Advanced options.
6. Enable Automatically download updates, even over metered data connections
(charge may apply).
Manually Windows Update
1. On the display screen, navigate to ->Settings.
2. Enter the administrator password (default: sfb) to access Setup screen.
3. Navigate to Windows Settings->Go to Admin Sign-in.
4. Select Administrator from the bottom-left corner and then enter the administrator password
(default: sfb).
5. Do one of the following:
Long tap the Start button, and then select Device Manager.
Select the desired device and then long tap the device to select Update driver.
Select a desired way to update.
Tap the Start button, and then navigate to Settings->Upgrade & Security->Windows Update,
and select Check for updates.
Select the desired device and then complete the installation.
The software upgrade is only supported by the operating system of 64-bit Windows 10.

Controlling UVC80/UVC50 Camera Position

Procedure
1. Tap to enter the Camera Control page.
2. Tap or to zoom camera in/out.
3. Tap / / / to pan/tilt the camera.

Resetting UVC80/UVC50 Camera to Home Position

Procedure
1. Tap to enter the Camera Control page.
2. Tap Reset.

3
Regulatory Notices During a thunderstorm, stop using the device and disconnect it from the
power supply. Unplug the power plug and the Asymmetric Digital
Operating Ambient Temperatures
Subscriber Line (ADSL) twisted pair (the radio frequency cable) to avoid
Operating temperature: +32 to 104°F (0 to 40°C)
lightning strike.
Relative humidity: 5% to 90%, noncondensing
Storage temperature: -22 to +160°F (-30 to +70°C) If the device is left unused for a rather long time, disconnect it from the
Warranty power supply and unplug the power plug.
Our product warranty is limited only to the unit itself, when used normally When there is smoke emitted from the device, or some abnormal noise
in accordance with the operating instructions and the system environment. or smell, disconnect the device from the power supply, and unplug the
We are not liable for damage or loss resulting from the use of this product, power plug immediately.
or for any claim from a third party. We are not liable for problems with Contact the specified maintenance center for repair.
Yealink device arising from the use of this product; we are not liable for Do not insert any object into equipment slots that is not part of the
financial damages, lost profits, claims from third parties, etc., arising from product or auxiliary product.
the use of this product. Before connecting a cable, connect the grounding cable of the device
first. Do not disconnect the grounding cable until you disconnect all other
Explanation of the symbols cables.
DC symbol Cleaning Requirements
is the DC voltage symbol. Before cleaning the device, disconnect it from the power supply.
WEEE Warning symbol Use a piece of soft, dry and anti-static cloth to clean the device.
To avoid the potential effects on the environment and human health Keep the power plug clean and dry.
as a result of the presence of hazardous substances in electrical and Troubleshooting
electronic equipment, end users of electrical and electronic The unit cannot supply power to device other than Yealink device.
equipment should understand the meaning of the crossed-out wheeled bin There is a bad connection with the plug.
symbol. Do not dispose of WEEE as unsorted municipal waste and have to 1. Clean the plug with a dry cloth.
collect such WEEE separately. 2. Connect it to another wall outlet.
Restriction of Hazardous Substances Directive (RoHS) The usage environment is out of operating temperature range.
This device complies with the requirements of the EU RoHS Directive. 1. Use in the operating temperature range.
Statements of compliance can be obtained by contacting support@yealink.com. The cable between the unit and the Yealink device is connected incorrectly.
1. Connect the cable correctly.
Safety Instructions You cannot connect the cable properly.
Save these instructions. Read these safety instructions before use! 1. You may have connected a wrong Yealink device.
General Requirements 2. Use the correct power supply.
Some dust, etc., may be in the port.
Before you install and use the device, read the safety instructions 1. Clean the port.
carefully and observe the situation during operation. Contact your dealer or authorized service facility for any further questions.
During the process of storage, transportation, and operation, please
always keep the device dry and clean, avoid collision and crash. FCC Statement
Please attempt not to dismantle the device by yourself. In case of any This device complies with part 15 of the FCC Rules. Operation is subject to the
discrepancy, please contact the appointed maintenance center for repair. following
Please refer to the relevant laws and statutes while using the device. two conditions: (1) this device may not cause harmful interference, and (2) this
Legal rights of others should be respected as well. device must accept any interference received, including interference that may
cause undesired operation.
Environmental Requirements Any Changes or modifications not expressly approved by the party responsible
Place the device at a well-ventilated place. Do not expose the device for compliance could void the user's authority to operate the equipment.
under direct sunlight.
Keep the device dry and free of dusts. IC Statement
Do not place the device on or near any inflammable or fire-vulnerable This device complies with Industry Canada’s licence-exempt RSSs. Operation is
object, such as rubber-made materials. subject to the following two conditions:
Keep the device away from any heat source or bare fire, such as a candle (1) this device may not cause interference; and
or an electric heater. (2) this device must accept any interference, including interference that may
cause undesired operation of the device. CAN ICES-3(B)
Operating Requirements Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
Do not let a child operate the device without guidance. appareils radio exempts de licence. L’exploitation est autorisée aux deux
Do not let a child play with the device or any accessory in case of conditions suivantes :
accidental swallowing. (1) l’appareil ne doit pas produire de brouillage;
Please use the accessories provided or authorized by the manufacturer (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
only. même si le brouillage est susceptible d’en compromettre le
The power supply of the device shall meet the requirements of the input fonctionnement.NMB-3(B)
voltage of the device. Please use the provided surge protection power Contact Information
socket only. YEALINK NETWORK TECHNOLOGY CO.,LTD.
Before plugging or unplugging any cable, make sure that your hands are 309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R. China
completely dry. YEALINK (EUROPE) NETWORK TECHNOLOGY B.V.
Do not spill liquid of any kind on the product or use the equipment near Strawinskylaan 3127, Atrium Building, 8th floor, 1077ZX Amsterdam, The Netherlands
water, for example, near a bathtub, washbowl, kitchen sink, wet YEALINK (USA) NETWORK TECHNOLOGY CO., LTD.
basement or near a swimming pool. 999 Peachtree Street Suite 2300, Fulton, Atlanta, GA, 30309, USA
Made in China
About Yealink
Yealink is a global leading provider of enterprise communication and collaboration solutions, offering video conferencing service to worldwide
enterprises. Focusing on research and development, Yealink also insists on innovation and creation. With the outstanding technical patents of cloud
computing, audio, video and image processing technology, Yealink has built up a panoramic collaboration solution of audio and video conferencing
by merging its cloud services with a series of endpoints products. As one of the best providers in more than 140 countries and regions including the
US, the UK and Australia, Yealink ranks No.1 in the global market share of SIP phones shipments.

Technical Support
Visit Yealink WIKI (http://support.yealink.com/) for the latest firmware, guides, FAQ, Product documents, and more. For better service, we sincerely
recommend you to use Yealink Ticketing system (https://ticket.yealink.com) to submit all your technical issues.

MVC800/MVC500- EN

Web: www.yealink.com | Addr: 309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R.
China
Copyright©2019YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD. All rights reserved.