Grundfosliterature 1663886

GRUNDFOS DATA BOOKLET
CM, CME
Horizontal, multistage centrifugal pumps
50/60 Hz
CM, CME
Contents
1.
General description
Introduction
2.
Overview
3.
Applications
4.
Features and benefits
5.
Identification
10
Type key
10
6.
Product range
11
7.
Performance range
13
CM, 50 Hz
CM, 60 Hz
CME, 50/60 Hz
13
13
14
Operating conditions
15
Environmental rating
16
Pumped liquids
18
List of pumped liquids
18
18. Performance curves, CM 60 Hz

CM 1
CM 3
CM 5
CM 10
CM 15
CM 25
19. Performance curves, CME 50/60 Hz
8.
9.
10. Construction
Pump
Motor
Frequency converter operation
Shaft seal
Material specification
11. CME pumps

Communication with CME pumps
Speed control of CME pumps
12. Grundfos CUE

CM pumps connected to Grundfos CUE, external
frequency converters
13. Approvals and markings

Approvals
Markings
14. Certificates
15. Selection and sizing
Selection of pumps
Selection of CME pumps
16. How to read the curve charts

Guidelines to performance curves

CM 1
CM 3
CM 5
CM 10
CM 15
CM 25
21
21
21
22
22
25
26
26
27
28
28
29
29
29
30
34
34
36
37
37
38
38
39
40
41
42
43
CME 1
CME 3
CME 5
CME 10
CME 15
CME 25
44
44
45
46
47
48
49
50
50
51
52
53
54
55
20. Dimensions, CM 50 Hz
56
CM 1-A
CM 1-I and CM 1-G
CM 3-A
CM 3-I and CM 3-G
CM 5-A
CM 5-I and CM 5-G
CM 10-A
CM 10-I and CM 10-G
CM 15-A
CM 15-I and CM 15-G
CM 25-A
CM 25-I and CM 25-G
56
57
58
59
60
61
62
63
64
65
66
67
21. Dimensions, CM 60 Hz and 50/60 Hz

CM 1-A
CM 1-I and CM 1-G
CM 3-A
CM 3-I and CM 3-G
CM 5-A
CM 5-I and CM 5-G
CM 10-A
CM 10-I and CM 10-G
CM 15-A
CM 15-I and CM 15-G
CM 25-A
CM 25-I and CM 25-G
22. Dimensions, CME 60 Hz and 50/60 Hz

CME 1-A
CME 1-I and CME 1-G
CME 3-A
CME 3-I and CME 3-G
CME 5-A
CME 5-I and CME 5-G
CME 10-A
CME 10-I and CME 10-G
CME 15-A
CME 25-A
68
68
69
70
71
72
73
74
75
76
77
78
79
80
80
81
82
83
84
85
86
87
88
89
90
91
CM, CME
24. Motor data

Mains-operated motors, 50 Hz
Mains-operated motors, 50/60 Hz
Speed-controlled motors
Additional data for speed-controlled motors
25. Customisation
Motors
Pumps
26. Accessories
Pipework connections
Potentiometer for CME
CIU communication interface units for CME
R100 remote control
Sensors for CME
MP 204 motor protector
Cover for CM motor
Angled cable gland
27. Further product documentation

WebCAPS
WinCAPS
92
Contents
23. Weights and shipping volume
103
103
103
104
106
107
108
108
112
114
114
119
119
119
120
121
121
121
122
122
123
123
CM, CME
Introduction
CM
The Grundfos CM and CME pumps are

non-self-priming, horizontal, multistage, end-suction
centrifugal pumps. The pumps are of the close-coupled
type. CM pumps are fitted with mains-operated motors
whereas the motor for CME pumps has an integrated
frequency converter. Both CM and CME pumps have
mechanical shaft seals.
Cast-iron version
The CM and CME pumps are available in these three

material versions:
cast iron (EN-GJL-200)*
stainless steel (EN 1.4301/AISI 304)
stainless steel (EN 1.4401/AISI 316).
* The impeller, chamber and filling plugs are made of stainless steel
(EN 1.4301/AISI 304).
The pump shaft is made of stainless steel (EN 1.4057/AISI 431).
Stainless-steel version
Fig. 1
TM05 1128 2211 - TM05 1129 2211
General description
1. General description
Grundfos CM pumps
The CM pumps are unique products that have been

developed in order to fulfil a wide variety of customer
demands. The development of the pumps has resulted
in no less than five patent applications.
The CM pumps are available in various sizes and
numbers of stages to provide the flow and pressure
required.
The CM pumps consist of two main components:
the motor and the pump unit.
The motor is a Grundfos motor designed to
EN standards.
The pump unit incorporates optimised hydraulics and
offers various types of connections.
The pumps offer many advantages, some of which are
listed below and described in detail in 4. Features and
benefits on page 9:
compact design
worldwide usage
high reliability
service-friendly
wide performance range
low noise
customised solutions.
CM, CME
1
General description
Selecting a CME pump

Select a CME pump if the following features are
required:
CME
controlled operation, i.e. consumption fluctuates

constant pressure
Cast-iron version
Stainless-steel version
Fig. 2
TM05 1126 2211 - TM05 1122 2211
communication with the pump.

Adaptation of performance through
frequency-controlled speed offers obvious benefits
such as:
energy savings
increased comfort
control and monitoring of the application and pump
performance.
For further information about CME pumps, see
11. CME pumps on page 26.
Grundfos CME pumps
The CME pumps are built on the basis of CM pumps.

CME pumps belong to the so-called E-pump family.
The difference between the CM and the CME pump
ranges is the motor.
The CME pump motor is a Grundfos MGE motor
designed to EN standards. The motor incorporates a
frequency converter.
Frequency control enables continuously variable
control of the motor speed, which makes it possible to
set the pump to operation at any duty point. The aim of
continuously variable control of the motor speed is to
adjust the performance to a given requirement.
It is possible to connect a pressure sensor to the built-in
frequency converter on CME pumps. For further
information, see Sensors for CME on page 120.
The pump materials are identical to those of the
CM pump range.
CM, CME
2
Overview
2. Overview
Construction
Certificates
and approvals
Selection and
sizing
Applications
Identification
Pages 7 and 8
Page 10
Product range
Operating
conditions
Pages 11 and 12
Pages 15 to 17
Pipe
connections
Performance
curves
p
[kPa]
Certificate of compliance w
Hf
EN 10204 2.1
H
[m]
130
-8
CM 10
50 Hz
1200
ISO 9906 Annex A
120
-7
Customer name
Customer order no.
Customer Tag no.
GRUNDFOS order no.
Product type
pb
110
NPSH
1000
HV
100
-6
90
800
We the undersigned hereby guarantee and certify that the mate

above mentioned product were manufactured, tested, inspected
quirements of the appropriate catalogues, drawings and/or spe
80
-5
70
4
Pages 21 to 25
Pages 30 and 31
Pages 34 to 36
Pages 35 and 113
Pages 38 to 55
Dimensions
Motor data
Accessories
Customisation
Further
product
information
Pages 56 to 91
Pages 103 to 107
Pages 114 to 121
Page 108
Pages 122 and 123
CM, CME
The CM and CME pumps are designed to cover a wide

variety of applications, ranging from small domestic
installations to large industrial systems. The pumps are
therefore suitable for a wide diversity of pumping
systems where the performance and material of the
pump must meet specific demands.
Applications
3. Applications
Water treatment
Some of the most typical applications are mentioned

below:
washing and cleaning
water treatment
temperature control
Gr7052
pressure boosting.
Washing and cleaning
Fig. 4
Water treatment
In water treatment plants, the water undergoes a

process which makes it more suited for its end-use.
In this process, the CM and CME pumps can be utilised
either as feed pumps or as booster pumps.
Reference applications
Typical water treatment applications:
nano-, micro- and ultra-filtration systems
softening, ionising, demineralising systems
desalination systems
Gr3572
distillation systems
Fig. 3
separators
swimming baths.
Washing and cleaning
CM and CME pumps can be used in washing and

cleaning applications, which usually involve pumping of
water containing soap or other cleaning agents.
Temperature control
Typical washing and cleaning applications:
degreasing and washing of production equipment in
industrial environments such as the food and
beverage industry
washing machines
vehicle-washing tunnels
mobile-washing units
GrA6288
units for CIP (Cleaning In Place).
Fig. 5
Temperature control
Temperature control involves applications where the

CM and CME pumps circulate a liquid in a closed loop
consisting of a heating or cooling element for optimising
a process by means of temperature.
Temperature control is also chilling of equipment or
food and beverage in the food production industry.
CM, CME
3
Applications
Pressure boosting
The CM and CME pumps can for example be used in

temperature control systems such as:
electronic data processing
laser equipment
medical equipment
industrial refrigeration
heating and cooling in industrial processes
moisturising and humidifying.
We provide solutions for applications involving pumping

of these liquids:
liquids at temperatures down to -20 C
high-temperature liquids
high-viscous liquids, etc.
Pumping of liquids at temperatures down to -20 C*
When pumping liquids at temperatures down to -20 C,
it is crucial that the pump parts are made of the right
materials and have the right dimensions.
At such low temperatures, the selection of wrong
materials and dimensions may cause deformation
because of thermal expansion, and eventually
stoppage of operation.
* CM and CME pumps for pumping liquids at temperatures below -20 C
are available on request. Please contact Grundfos.
Pumping of high-temperature liquids

The pumping of hot liquids such as water-based liquids
up to +120 C demands much of the pump parts, such
as shaft seals and rubber parts.
Pumping of high-viscous liquids
In applications where high-viscous liquids are pumped,
the motor of the pump can be overloaded, and the
pump performance will be reduced.
The viscosity of a pumped liquid depends strongly on
the pumped liquid and its temperature.
To meet the above-mentioned requirements, we offer
CM and CME pumps with oversize motors.
Gr0526
To ensure safe and reliable operation in applications

involving temperature control, we offer CM and CME
pumps designed to meet your needs!
Fig. 6
Pressure boosting
In pressure-boosting applications, the pumped liquid

must be delivered at a desired pressure on demand.
The main priorities in pressure-boosting applications
are to ensure maximum reliability and user comfort.
Therefore, the CM and CME pumps are also ideal for
such applications.
Typical pressure-boosting applications:
pressure boosting and transfer of drinking water
process-water systems.
Other applications
Besides the applications mentioned above, the CM and
CME pumps can be used in many other applications.
Examples:
distilling systems
dosing/mixing
evaporation
comprised machinery
chemical industry
pharmaceutical industry.
CM, CME
Fig. 7
CM and CME pumps
CM and CME pumps present the following features and

benefits:
Compact design
Pump and motor are integrated in a compact and
user-friendly design. The pump is fitted to a low-profile
base plate, making it ideal for installation in systems
where compactness is important.
Modular construction/customised solutions
The modular construction of the CM and CME pumps
makes it easy to create many different variants based
on standard factory parts. This means that it is possible
to create pump variants that are customised for the
application in question.
Service-friendly
Service was in mind during the development.
No special service tools required.
Spare parts in stock for quick delivery.
All parts available as kits, single parts or bulks.
Service instructions and video make it simple to
disassemble and assemble the pump.
Service kit instructions available where estimated
necessary.
Wide performance range
Can be used in a wide range of applications:
washing and cleaning
water treatment
temperature control
pressure boosting
chemical industry
pharmaceutical industry
etc.
Product range in WinCAPS and WebCAPS.
See 27. Further product documentation on
page 122.
Low noise level
The CM and CME pumps offer very silent operation.
Worldwide usage
With different voltage and frequency combinations,
the CM and CME product ranges cover markets
worldwide.
High-performance hydraulics
Pump efficiency is maximised by the optimised
hydraulics and carefully crafted production technology.
Various certificates covering worldwide usage are

available. See 14. Certificates on page 30.
Electrocoated cast-iron parts

Optimised corrosion resistance
High reliability
New state-of-the-art shaft seal design and materials
offering these benefits:
Better efficiency because of smooth surfaces.
high wear resistance and long operating life

improved sticking and dry-running capabilities.
The pumps are less sensitive to impurities in the
pumped liquid than similar pumps of the
canned-rotor type.
Features and benefits
TM04 3509 4508 - TM04 3511 4508
4. Features and benefits
Customised solutions
It is possible to create many different variants of the CM
and CME pumps.
For further information, see 25. Customisation on
page 108.
Motor adaptation
Pump body modifications.
Easy installation and commissioning

A Quick Guide is supplied with each CM pump,
which enables easy installation and commissioning.
Detailed multilingual installation and operating
instructions are supplied with each pump.
Grundfos motors are available with integrated

frequency converter designed for speed-controlled
operation.
Data and literature about the CM and CME pumps
All literature and technical data related to CM and CME
pumps are available on line in Grundfos WebCAPS.
TM05 0870 1811
An installation indicator is fitted on three-phase

pumps, which makes it easy to see if the electrical
connection of the motor is correct. Based on the
motor cooling air, it indicates the direction of rotation
of the motor.
Grundfos motor
Grundfos motors are remarkably silent and highly
efficient.
Fig. 8
Installation indicator
CM, CME
5
Identification
5. Identification
Type key
Example
CME
10
A - R - A - E - A
- X - X -
Type range
CM: Centrifugal Modular
CME: Centrifugal Modular with integrated
frequency converter
Mains plug
A: Prepared for cable glands
B: Harting plug
C: With cable
D: Cable gland included
Rated flow rate

Rated flow rate at 50 Hz [m3/h]
Number of impellers
Pump version
A: Basic version
B:
Oversize motor (one flange size larger)
E:
N:
P:
T:
Pumps with certificates/approvals

CME pump with pressure sensor
Undersize motor (one flange size smaller)
Oversize motor (two flange sizes larger)
Motor information
A: Standard motor (IP55)
B: Phase-insulated motor for use with
frequency converter
C: Condensing environments
D: Pt100 in stator
E: Angular contact bearing
F: Motor heater
G: Three-phase motor with overload
protection
H: Single-phase motor with no
protection
J: Low-noise motor
BE: Oversize motor with certificates/approvals

BN: Oversize motor with pressure sensor
EN:
EP:
ET:
EX:
Pumps with certificates/approvals and pressure sensor

Pumps with certificates/approvals and undersize motor
Pumps with certificates/approvals and double-oversize motor
Pumps with certificates/approvals and two other variants
selected
NP: Undersize motor with pressure sensor
NT: Double-oversize motor with pressure sensor
X: Special pump
Supply voltage
Pipe connection
C:
Tri-Clamp
F:
DIN/ANSI/JIS flange
P:
R:
S:
Victaulic coupling
Whitworth thread Rp (ISO 7/1)
Internal NPT thread
G:
I:
X:
A:
1 x 220 V, 60 Hz
B:
B1:
C:
D:
E:
E1:
1 x 115/230 V, 60 Hz
1 x 115/230 V, 60 Hz, with terminal board
1 x 220-240 V, 50 Hz
1 x 127 V, 60 Hz
3 x 208-230/440-480 V, 60 Hz
3 x 208-230/440-480 V, 60 Hz, with terminal
board
3 x 220-240/380-415 V, 50 Hz
3 x 200/346 V, 50 Hz; 200-220/346-380 V,
60 Hz
3 x 575 V, 60 Hz
3 x 400 V, 50/60 Hz
3 x 380-415 V, 50 Hz; 440-480 V, 60 Hz
1 x 200-240 V, 50/60 Hz (E-motor)
3 x 380-480 V, 50/60 Hz (E-motor)
1 x 208-230 V, 50/60 Hz (E-motor)
3 x 460-480 V, 60 Hz (E-motor)
3 x 220-240/380-415 V, 50 Hz
3 x 220-255/380-440 V, 60 Hz
3 x 208-230 V, 50/60 Hz (E-motor)
3 x 200-230 V, 50/60 Hz (E-motor)
F:
G:
H:
I:
J:
K:
L:
M:
N:
Materials in contact with pump media

A:
Suction and discharge parts
EN-GJL-200
Pump shaft
Impellers/chambers
Sleeve
Pump shaft
Impellers/chambers
Sleeve
Pump shaft
Impellers/chambers
Special version
EN
EN
EN
EN
EN
EN
EN
EN
1.4301/AISI
1.4301/AISI
1.4401/AISI
1.4401/AISI
1.4401/AISI
1.4301/AISI
1.4301/AISI
1.4301/AISI
O:
304
304
316
316
316
304
304
304
Rubber parts in pump (excluding neck ring and shaft seal)

E: EPDM (ethylene propylene)
K: FFKM (perflour)
V:
FKM (flour)
Note: Gaskets between chambers for cast-iron versions are always made of
Tesnit BA-U.
Q:
R:
Material of secondary seal

E: EPDM (ethylene propylene)
K: FFKM (perflour)
V: FKM (flour)
Material of stationary seal face
B: Carbon, resin-impregnated
Q: Silicon carbide (SIC)
Material of rotating seal face
Q: Silicon carbide (SIC)
V: Aluminium oxide (AI203)
Shaft seal type designation
A: O-ring seal with fixed driver
Note: The type key cannot be used for ordering as not all combinations are possible.
10
X
Sensor
Sensor designation
CM, CME
Shaft seal
50 Hz
Mains-operated motor
Electronically
speed-controlled motor
60 Hz
50/60 Hz
Voltage
[V]
Voltage
[V]
Voltage
[V]
AVBE
AVBV
AQQE, AQBE
AQQV, AQBV
AQQK
1 x 220-240 V (supply voltage C)
3 x 220-240/380-415 V (supply voltage F)
1 x 220 V (supply voltage A)
1 x 115/230 V (supply voltage B/B1) 4)
1 x 127 V (supply voltage D)1)
3 x 208-230/440-480 V (supply voltage E/E1) 4)
3 x 575 V (supply voltage H)4)
3 x 220-240/380-415 V, (50 Hz)/

3 x 220-255/380-440 V, (60 Hz) (supply voltage O)
3 x 380-415 V, (50 Hz)/

3 x 440-480 V, (60 Hz) (supply voltage J)
3 x 200 V/346 V, (50 Hz);

3 x 200-220/346-380 V, (60 Hz) (supply voltage G)
3 x 400 V (50/60 Hz) (supply voltage I)
CM 1-4
CM 1-5
CM 1-6
CM 1-7
2)
CM 1-8
CM 1-9
2)
CM 1-10
2)
3)
CM 1-11
3)
CM 1-12
3)
3)
CM 1-13
3)
3)
CM 1-14
3)
3)
1 x 208-230 V (50/60 Hz) (supply voltage M)
Stainless steel EN 1.4401/AISI 316 (CM-G)
3 x 460-480 V (60 Hz) (supply voltage N)
Stainless steel EN 1.4301/AISI 304 (CM-I)
CM 1-3
1 x 200-240 V (50/60 Hz) (supply voltage K)
Cast iron EN-GJL-200 (CM-A)
CM 1-2
Pump type
3 x 380-480 V (50/60 Hz) (supply voltage L)
Voltage
[V]
Material
60 Hz
Material
50 Hz
Product range
6. Product range
CM 3-2
CM 3-3
CM 3-4
CM 3-5
CM 3-6
CM 3-7
2)
CM 3-8
CM 3-9
2)
CM 3-10
2)
3)
CM 3-11
3)
CM 3-12
3)
3)
CM 3-13
3)
3)
CM 3-14
3)
3)
1)
On request.
2)
Neither suitable for 60 Hz mains-operated pumps, nor for CME pumps running at 100 % speed.
3)
Not suitable for pumping liquids at temperatures above +90 C.
4)
Pumps with supply voltages B and E are supplied for wire connection without terminal board inside the terminal box (flying wires).
Pumps with supply voltages B1 and E1 are supplied with terminal board inside the terminal box.
11
CM, CME
6
60 Hz
50/60 Hz
Electronically
speed-controlled motor
Voltage
[V]
Voltage
[V]
Voltage
[V]
1 x 220-240 V (supply voltage C)
3 x 220-240/380-415 V (supply voltage F)
1 x 220 V (supply voltage A)
3 x 220-240/380-415 V, (50 Hz)/

3 x 220-255/380-440 V, (60 Hz) (supply voltage O)
3 x 380-415 V, (50 Hz)/

3 x 440-480 V, (60 Hz) (supply voltage J)
3 x 200 V/346 V, (50 Hz);

3 x 200-220/346-380 V, (60 Hz) (supply voltage G)
3 x 400 V (50/60 Hz) (supply voltage I)
CM 5-4
CM 5-5
CM 5-6
CM 5-7
CM 5-8
2)
CM 5-9
2)
CM 5-10
2)
CM 5-11
3)
3)
CM 5-12
3)
3)
CM 5-13
3)
3)
3 x 460-480 V (60 Hz) (supply voltage N)
AQQK
1 x 200-240 V (50/60 Hz) (supply voltage K)
AQQE, AQBE
AQQV, AQBV
3 x 380-480 V (50/60 Hz) (supply voltage L)
AVBE
AVBV
3 x 575 V (supply voltage H)4)
3 x 208-230/440-480 V (supply voltage E/E1) 4)
CM 5-3
1 x 127 V (supply voltage D)1)
CM 5-2
Pump type
1 x 115/230 V (supply voltage B/B1) 4)
Voltage
[V]
Material
50 Hz
Material
CM 10-1
CM 10-2
CM 10-3
CM 10-4
CM 10-5
2)
CM 10-6
2)
CM 10-7
3)
3)
3)
3)
CM 10-8
12
Mains-operated motor
60 Hz
CM 15-1
CM 15-2
CM 15-3
CM 15-4
CM 25-1
CM 25-2
CM 25-3
CM 25-4
2)
2)
2)
1 x 208-230 V (50/60 Hz) (supply voltage M)
Product range
Shaft seal
50 Hz
1)
On request.
2)
Neither suitable for 60 Hz mains-operated pumps, nor for CME pumps running at 100 % speed.
3)
Not suitable for pumping liquids at temperatures above +90 C.
4)
Pumps with supply voltages B and E are supplied for wire connection without terminal board inside the terminal box (flying wires).
Pumps with supply voltages B1 and E1 are supplied with terminal board inside the terminal box.
CM, CME
7
Performance range
7. Performance range
CM, 50 Hz
p
[kPa]
1200
1000
H
[m]
130
CM
120
2900 rpm
110
ISO 9906 Annex A
50 Hz
100
90
800
80
70
600
60
50
400
40
30
CM 1
200
CM 3 CM 5
CM 10
CM 15
CM 25
20
10
0
0
10
12
14
16
18
20
22
24
26
Q [m/h]
28
Q [l/s]
TM04 3340 0110
CM-A
CM-I/G
CM, 60 Hz
p
[kPa]
1200
H
[m]
CM
120
3480 rpm
110
1000
60 Hz
ISO 9906 Annex A
100
90
800
80
70
600
60
50
400
40
30
CM 1
200
CM 3 CM 5
CM 10
CM 15
CM 25
20
10
0
0
4
1
8
2
10
12
3
14
4
16
18
5
20
22
6
24
26
7
28
30
8
32
9
34 Q
[m/h]
Q [l/s]
TM04 3369 0110
CM-A
CM-I/G
13
CM, CME
7
Performance range
CME, 50/60 Hz
p
[kPa]
1200
H
[m]
CME
120
3480 rpm
110
1000
50/60 Hz
ISO 9906 Annex A
100
90
800
80
70
600
60
50
400
40
30
CM 1
200
CM 3 CM 5
CM 10
CM 15
CM 25
20
10
0
0
4
1
8
2
10
12
3
14
4
16
18
5
20
22
6
24
26
7
28
30
8
32
34 Q
CME-A
CME-I/G
Note: Irrespective of the input frequency, the 100 % speed of CME pumps is approximately 3400 min-1.
14
[m/h]
Q [l/s]
TM04 3568 0110
CM, CME
Ambient temperature
8. Operating conditions
Installation of pump
Maximum ambient temperature in relation to liquid

temperature
The maximum ambient temperature depends on the
liquid temperature as shown in the table below.
Liquid temperature
+55 C 1)
+90 C
+50 C 1)
+100 C 2)
+45 C 1)
+110 C 2)
+40 C
+120 C 2)
Up
1)
The maximum ambient temperature for CME pumps is +40 C,

irrespective of the liquid temperature.
2)
Note that the maximum permissible liquid temperature for CM-A and
CME-A is +90 C.
Derating of motor output (P2) in relation to ambient

temperature and altitude above sea level
If the ambient temperature exceeds +40 C for CME
pumps or +55 C for CM pumps, or if the motor is
installed more than 1000 metres above sea level, the
motor output (P2) must be reduced due to the low
density and consequently low cooling effect of the air.
In such cases, it may be necessary to use an oversize
motor with higher rated output. Figure 9 shows the
relationship between motor output (P2) and ambient
temperature or motor output (P2) and altitude.
The x-axis showing the temperature corresponds to an
altitude of 1000 metres above sea level. The x-axis
showing the altitude corresponds to an ambient
temperature of +40 C.
P2
[%]
100
The pump must be installed so that air locks are

avoided in the pump housing and pipework.
Figure 10 shows the permissible pump positions.
TM03 8773 2810
Maximum ambient temperature
The pump must be installed on a plane surface and

fixed so that it cannot be displaced during startup and
operation.
Floor
Fig. 10 Pump positions
The pump should be installed with easy access for

inspection, maintenance and service.
The pump should be installed in a well-ventilated
location.
Maximum operating pressure and permissible
liquid temperature
The maximum operating pressure and the permissible
liquid temperature depend on the pump material, the
type of shaft seal and the pumped liquid.
CM
90
CME
80
Material variant
Shaft
seal
Permissible liquid
temperature 1)
Maximum
operating
pressure
AVBx
-20 C to +40 C
+41 C to +90 C
10 bar
6 bar
AQQx/
AQBx
-20 C to +90 C
10 bar
AVBx
-20 C to +40 C
+41 C to +90 C
10 bar
6 bar
AQQx/
AQBx
-20 C3) to +90 C

+91 C to +120 C 2)
16 bar
10 bar
AVBx
-20 C to +40 C
+41 C to +90 C
10 bar
6 bar
AQQx/
AQBx
-20 C3) to +90 C

+91 C to +120 C 2)
16 bar
10 bar
70
50
20 25 30 35 40 45 50 55 60 65 70 75 80
t [C ]
1000
Fig. 9
2250
3500
4750
TM04 3792 5008
60
Cast iron
(EN-GJL-200)
Stainless steel
(EN 1.4301/AISI 304)
Relationship between motor output (P2) and

temperature or motor output (P2) and altitude
Storage and transport temperature

CM: -50 C to +70 C.
CME: -30 C to +60 C.
Stainless steel
(EN 1.4401/AISI 316)
1)
At liquid temperatures below 0 C (32 F), higher motor outputs may be

needed due to increased viscosity, for instance if glycol has been
added to the water.
2)
120 C applies only if the pump has an AQQE/AQBE shaft seal.
3)
CM-I, -G and CME-I, -G pumps for liquid temperatures below -20 C

are available on request. Please contact Grundfos.
15
CM, CME
Operating range of the shaft seal
Liquid temperature range

O-ring material / liquid
EPDM
The operating range of the shaft seal depends on

operating pressure, type of shaft seal and liquid
temperature.
Permissible liquid
temperature
-20 C to +120 C
FFKM
0 C to +120 C
FKM / liquids containing water
-20 C to +90 C
FKM / oil without water
-20 C to +120 C
The curve in fig. 12 shows which shaft seals are

suitable at a given temperature and a given pressure.
The curve applies to clean water.
Frequency of starts and stops

Maximum 100 per hour.
16
Operation in condensing environments

If the liquid temperature becomes lower than the
ambient temperature, condensation may form in the
motor during inactivity. In such cases, a motor suited for
condensing environments must be used.
When installing CM and CME pumps outdoors, provide
them with a suitable cover to protect them from build-up
of condensed water. See fig. 11.
AQQE
AQBE
AQQV
AQBV
10
**
6
AVBE
AVBV
AQQE
AQBE
AQQV
AQBV
-30* -20*
AVBE
AVBV
AQQE
AQBE
AQQV
AQBV
AQQK
0*
+40
AQQE
AQBE
AQQV
AQBV
AQQK
AVBE
AVBV
AQQE
AQBE
AQQE
AQBE
AQQV***
AQBV
AQQK
AQQV
AQBV
AQQK
+90
+120
t [C]
TM04 3596 4708
p [bar]
TM04 5799 4009
Fig. 12 Curve for the selection of shaft seals
Fig. 11 CME pump with protective cover
Motors in outdoor installations radiate heat to and

absorb heat from their surroundings. By day, a stopped
motor will absorb more heat than it radiates; by night,
especially clear nights, radiation from a stopped motor
may be so high that the surface temperature falls a few
degrees below the air temperature. This may cause the
formation of condensation. Condensation on the inner
surfaces may result in moisture on the electronic
components, including the printed-circuit boards, which
means a risk of failure or even destruction of the motor
and electronics.
Furthermore, the cover protects the motor against
direct sunlight.
Environmental rating
Three-phase CME motors hold a UL NEMA 3R
environmental rating.
Single-phase CME motors have not been tested
against the UL NEMA environmental rating.
All motors are IP55.
16
* Antifreeze should be added at liquid temperatures below 0 C.

** CM and CME pumps for liquid temperatures below -20 C are
available on request. Please contact Grundfos.
*** AQQV/AQBV above +90 C only in media not containing water.
Shaft seal run-in

The seal faces are lubricated by the pumped liquid,
meaning that there may be a certain amount of
leakage from the shaft seal.
When the pump is started up for the first time, or when
a new shaft seal is installed, a certain run-in period is
required before the leakage is reduced to an
acceptable level. The time required for this depends on
the operating conditions, i.e. every time the operating
conditions change, a new run-in period will be started.
Under normal conditions, the leaking liquid will
evaporate. As a result, no leakage will be detected.
However, liquids such as kerosene will not evaporate.
The leakage may therefore be seen as a shaft seal
failure.
Viscosity
The pumping of liquids with densities or kinematic
viscosities higher than those of water will cause a
considerable pressure drop, a drop in the hydraulic
performance and a rise in the power consumption.
For instance at liquid temperatures below 0 C (32 F),
higher motor outputs may be needed due to increased
viscosity if glycol has been added to the water.
In such situations, the pump should be fitted with a
larger motor. If in doubt, contact Grundfos or visit
WebCAPS. See page 122.
CM, CME
Sound pressure level
Minimum inlet pressure, NPSH
The sound pressure values in the table below apply for

CM pumps. If the motor output (P2) for a given
CM pump is not found in the table, use the nearest
rounded-up value. The values for sound pressure
include a tolerance of 3 dB(A) according to
EN ISO 4871.
Calculation of the inlet pressure "H" is recommended in

these situations:
The liquid temperature is high.

The flow is significantly higher than the rated flow.
Water is drawn from depths.
Water is drawn through long pipes.
60 Hz
LpA
[dB(A)]
LpA
[dB(A)]
0.37
50
55
0.55
50
53
0.75
50
54
1.1
52
57
1.5
54
59
2.2
54
59
3.0
55
60
4.0
62
66
5.5
60
65
7.5
60
65
11.0
60
65
The audible noise from CM pumps is primarily noise

from the motor fan. The selection of CME pumps will
reduce the noise at partial load, as the motor, and
consequently, the motor fan runs at a lower speed.
Possible flow noise from control valves is also reduced
at partial load in the case of the CME pump.
Inlet conditions are poor.

To avoid cavitation, make sure that there is a minimum
pressure on the suction side of the pump.
The maximum suction lift "H" in metres head can be
calculated as follows:
H = pb x 10.2 - NPSH - Hf - Hv - Hs
pb
NPSH =
Hf
Hv
Hs
Barometric pressure in bar.

(Barometric pressure can be set to 1 bar).
In closed systems, pb indicates the system
pressure in bar.
Net Positive Suction Head in metres head.
(To be read from the NPSH curve at the
highest flow the pump will be delivering).
Friction loss in suction pipe in metres head.
(At the highest flow the pump will be
delivering).
Vapour pressure in metres head.
(To be read from the vapour pressure scale,
"Hv" depends on the liquid temperature
"Tm").
Safety margin = minimum 0.5 metres head.
If the "H" calculated is positive, the pump can operate

at a suction lift of maximum "H" metres head.
If the "H" calculated is negative, an inlet pressure of
minimum "H" metres head is required.
Hf
NPSH
H
pb
Hv
TM04 3487 4508
P2
[kW]
50 Hz
Fig. 13 Minimum inlet pressure (NPSH)
Note: To avoid cavitation, never select a pump with a

duty point too far to the right on the NPSH curve.
Always check the NPSH value of the pump at the
highest possible flow.
17
CM, CME
9
Pumped liquids
9. Pumped liquids
Thin, non-explosive liquids, not containing solid
particles or fibres. The liquid must not chemically attack
the pump materials.
When pumping liquids with a density and/or viscosity
higher than those of water, oversized motors must be
used, if required.
Whether a pump is suitable for a particular liquid
depends on a number of factors of which the most
important are the chloride content, pH value,
temperature and content of chemicals and oils.
Please note that aggressive liquids (for instance
seawater and some acids) may attack or dissolve the
protective oxide film of the stainless steel and thus
cause corrosion.
List of pumped liquids

A number of typical liquids are listed below.
Other pump versions may be applicable, but those
stated in the list are considered to be the best choices.
The table is intended as a general guide only and
cannot replace actual testing of the pumped liquids and
pump materials under specific working conditions.
The list should, however, be applied with some caution
as factors such as concentration of the pumped liquid,
liquid temperature or pressure may affect the chemical
resistance of a specific pump version.
Safety precautions must be taken when pumping
dangerous liquids.
Notes
a
b
c
d
f
g
18
To minimise the risk of corrosion the pump must be running

continuously, i.e. standstills must not exceed 6-8 hours.
May contain additives or impurities which can cause shaft seal
problems.
The density and viscosity may differ from those of water.
Consider this when calculating motor and pump performance.
In order to avoid corrosion, the liquid must be free of oxygen.
Flammable or combustible liquid.
Safety precautions must be considered to ensure safe handling
of flammable liquids. Handling the liquid above the flash point
and/or boiling point will require the greatest restrictions.
A seal-less pump may be required. Contact Grundfos.
Risk of crystallisation/precipitation on the shaft seal.
If oil residues are present, EPDM cannot be used.
As no protective deposits are formed in demineralised water, a
slight increase in the corrosion rate must be expected.
If impurities (e.g. contamination with metal ions) in the pumped
liquid are unacceptable, cast iron or copper containing metals
should not be used.
If the CO2 content is high, cast iron is unsuitable for use.
Special conditions related to the properties of demineralised
water with a conductivity less than 2 microS/cm makes a
SiC/SiC shaft seal unsuitable for use. Use the SiC/carbon shaft
seal combination instead.
CM, CME
Chemical
formula
Notes
Additional information
30 C, 2000 ppm chloride
Cast iron
(EN-GJL-200)
Stainless steel
(EN 1.4301/AISI 304)
Stainless steel
(EN 1.4401/AISI 316)
AVBE/AQQE
AVBE/AQQE
Pumped liquids
Pumped liquids
Water
Boiler feed water
Brackish water
Condensate
Cooling and cutting
lubricant
Groundwater
Demineralised water
Demineralised water
District heating water
Oil-containing water
Softened water
Swimming pool water,
chlorinated
AVBE/AQQE
AVBE/AQQE
AVBE/AQQE
AVBE/AQQE
AVBE/AQQE
AQQV
AQQV
AQQV
AVBE/AQQE
AQQE
AQBE
AVBE/AQQE
AVBV/AQQV
AVBE/AQQE
AVBE/AQQE
AQQE
AQBE
AVBE/AQQE
AVBV/AQQV
AVBE/AQQE
AVBE/AQQE
AQQE
AQBE
AVBE/AQQE
AVBV/AQQV
AVBE/AQQE
AVBE/AQQE
AVBE/AQQE
AQQE
AQQE
AQQE
AQQE
AQQE
AQQE
AQQE
AQQE
c, e
AQQV
AQQV
AQQV
CH3COOK
b, c, d, f
AQQE
AQQE
AQQE
HCOOK
b, c, d, f
AQQE
AQQE
AQQE
AQQE
AQQE
AQQE
AQQE
AQQE
AVBV/AQQV
AVBV/AQQV
AVBV/AQQV
AVBV/AQQV
AVBV/AQQV
AVBV/AQQV
AVBV/AQQV
AVBV/AQQV
AVBV/AQQV
AVBV/AQQV
AVBV/AQQV
AVBV/AQQV
AVBV/AQQV
AVBV/AQQV
AVBV/AQQV
AVBV/AQQV
AVBV/AQQV
AVBV/AQQV
AQQV
AQQV
AQQV
b
h
h, i
< 300 ppm chloride

> 2 microS/cm
< 2 microS/cm
40 C, 150 ppm chloride,

< 2 ppm free chlorine
Coolants
Calcium chloride
Ethylene glycol
Glycerine (glycerol)
Hydrocarbon-based
coolant
Potassium acetate
(inhibited)
Potassium formate
(inhibited)
Propylene glycol
Sodium chloride
CaCl2
C2H4(OH)2
C3H5(OH)3
b, c, d, f
b, c
b, c
CH3CHOHCH2OH b, c
NaCl
b, c, d, f
< 0 C, 30 %
< 0 C, 30 %
Fuels
Diesel oil
Jet fuel
Kerosene
Naphtha
Petrol
Biodiesel
e
e
e
e
e
e
Mineral oils
Crude oil
b, c, e
< 20 C
Mineral lubricating oil
c, e
AVBV/AQQV
AVBV/AQQV
AVBV/AQQV
Mineral motor oil
c, e
AVBV/AQQV
AVBV/AQQV
AVBV/AQQV
Synthetic lubricating oil
c, e
AVBV/AQQV
AVBV/AQQV
AVBV/AQQV
Synthetic motor oil
c, e
AVBV/AQQV
AVBV/AQQV
AVBV/AQQV
Silicone oil
AVBV/AQQV
AVBV/AQQV
AVBV/AQQV
Corn oil
b, c
AVBV/AQQV
AVBV/AQQV
AVBV/AQQV
Olive oil
b, c
AVBV/AQQV
AVBV/AQQV
AVBV/AQQV
Peanut oil
b, c
AVBV/AQQV
AVBV/AQQV
AVBV/AQQV
Synthetic oils
Vegetable oils
Rapeseed oil
b, c
AVBV/AQQV
AVBV/AQQV
AVBV/AQQV
Soy oil
b, c
AVBV/AQQV
AVBV/AQQV
AVBV/AQQV
b, g
AQQE
AQQE
AQQE
AQQV
AQQV
AQQV
Cleaning
Alkaline degreasing
agent
Soap (salts of fatty
acids)
< 80 C
Organic solvents
Acetone
Ethyl alcohol (ethanol)
Isopropyl alcohol
Methyl alcohol
(methanol)
C3H6O
C2H6O
C3H7OH
e
e
e
AVBE/AQQE
AVBE/AQQE
AVBE/AQQE
AVBE/AQQE
AVBE/AQQE
AVBE/AQQE
AVBE/AQQE
AVBE/AQQE
AVBE/AQQE
CH3OH
AVBE/AQQE
AVBE/AQQE
AVBE/AQQE
H2O2
AQQE
AQQE
Oxidants
Hydrogen peroxide
20 C, 25 %
19
CM, CME
9
Pumped liquids
Pumped liquids
Chemical
formula
Notes
Additional information
Cast iron
(EN-GJL-200)
Stainless steel
(EN 1.4301/AISI 304)
Stainless steel
(EN 1.4401/AISI 316)
AQQE
AQQE/AQQV
AQQE/AQQV
AQQE
AQQE/AQQV
AQQE/AQQV
AQQE/AQQV
AQQE/AQQV
AQQE
AQQE
AQQE
AQQE
AQQE/AQQV
AQQE/AQQV
AQQE/AQQV
AQQE/AQQV
AQQE/AQQV
AQQE/AQQV
AQQE/AQQV
AQQE/AQQV
AQQE/AQQV
AQQE/AQQV
AQQE/AQQV
AQQE/AQQV
AQQE/AQQV
AQQE/AQQV
AQQE
AQQK
AQQE
AQQE
AQQE
AQQK
AQQE
AQQE
AQQK
AQQE
AQQK
AQQE
AQQK
AQQE/AQQV
Salts
Ammonium bicarbonate NH4HCO3
b, c
Copper sulphate
Ferric sulphate
CuSO4
Fe2(SO4)3
b, c, f
b, c, f
Potassium bicarbonate
KHCO3
b, c
Sodium carbonate
Na2CO3
b, c, f
Potassium
permanganate
KMnO4
b, c
Sodium nitrate
NaNO3
b, c
Sodium nitrite
NaNO2
b, c
Sodium phosphate
(mono)
NaH2PO4
b, c, f
Sodium phosphate (di)
Na2HPO4
b, c, f
Sodium phosphate (tri)
Na3PO4
b, c, f
Sodium sulphate
Na2SO4
b, c, f
Sodium sulphite
Na2SO3
b, c, f
20
60
60
20
20
60
20
60
C,
C,
C,
C,
C,
C,
C,
C,
15
30
30
30
20
30
20
30
%
%
%
%
%
%
%
%
AQQE
AQQE/AQQV
AQQE
60 C, 10 %
20
60
20
60
C,
C,
C,
C,
5%
30 %
20 %
30 %
AQQE/AQQV
AQQE/AQQV
60 C, 20 %
30
60
20
70
60
20
60
C,
C,
C,
C,
C,
C,
C,
30 %
30 %
10 %
20 %
30 %
1%
20 %
20
60
40
20
40
25
40
20
50
70
20
20
20
50
C,
C,
C,
C,
C,
C,
C,
C,
C,
C,
C,
C,
C,
C,
15 %
50 %
50 %
30 %
30 %
40 %
40 %
10 %
10 %
40 %
1%
5%
10 %
10 %
30
30
20
60
20
80
C,
C,
C,
C,
C,
C,
30 %
5%
20 %
20 %
20 %
20 %
AQQE/AQQV
AQQE/AQQV
AQQE/AQQV
Acids
Acetic acid
C2H4O2
Citric acid
C6H8O7
c, f
Formic acid
CH2O2
Nitric acid
HNO3
Phosphoric acid
H3PO4
b, c, f
Sulphuric acid
H2SO4
Oxalic acid
Sulphurous acid
AQQE
AQQK
AQQE
AQQK
AQQE/AQQV
AQQE/AQQV
AQQE
AQQK
AQQE/AQQV
AQQE
AQQK
AQQE
AQQE
AQQE
AQQE
AQQE
AQQE
AQQE
AQQE
Alkalies
Ammonium hydroxide
Calcium hydroxide
NH4OH
Ca(OH)2
Potassium hydroxide
KOH
c, f
Sodium hydroxide
20
NaOH
c, f
AQQE
AQQE
AQQE
AQQE
CM, CME
10
Motor
The CM and CME pumps are non-self-priming,

horizontal, multistage centrifugal pumps. The pumps
have axial suction port and radial discharge port and
are mounted on a base plate.
CM and CME pumps are fitted with totally enclosed,

fan-cooled, 2-pole motors with principal dimensions to
EN 50347. The motors have been developed especially
for CM and CME pumps.
All movable parts are made of stainless steel.
Electrical tolerances comply with EN 60034.
The pumps are available with mains-operated motors

(CM pumps) and electronically speed-controlled motors
(CME pumps).
CME pumps up to and including 1.1 kW are fitted with

single-phase motors as standard. CME pumps from 1.1
to 7.5 kW are available with three-phase motors.
All pumps incorporate a maintenance-free mechanical

O-ring shaft seal with fixed driver.
Efficiency
TM05 1130 2211
Pump
Fig. 14 CM and CME pump hydraulics
Construction
10. Construction
Motors for CM and CME pumps comply with different

energy-efficiency requirements throughout the world.
E.g. Korean MEPS (Minimum Energy Performance
Standards) and the European Ecodesign directive.
Generally, this means that all three-phase motors of
0.75 kW and up are equipped with IE2-compliant
motors as standard.
IE3-compliant motors are available on request.
Electrical data
Insulation class
Enclosure class
IP55*
CM
1 x 220 V, 60 Hz
1 x 115/230 V, 60 Hz
1 x 220-240 V, 50 Hz
1 x 127 V, 60 Hz
3 x 208-230/440-480 V, 60 Hz
3 x 220-240/380-415 V, 50 Hz
3 x 200/346 V, 50 Hz; 200-220/346-380 V, 60 Hz
Supply voltages 3 x 575 V, 60 Hz
(tolerance 10 %) 3 x 400 V, 50/60 Hz
3 x 380-415 V, 50 Hz; 440-480 V, 60 Hz
3 x 220-240/380-415 V, 50 Hz
3 x 220-255/380-440 V, 60 Hz
CME
1 x 200-240 V, 50/60 Hz
3 x 380-480 V, 50/60 Hz
1 x 208-230 V, 50/60 Hz
3 x 460-480 V, 60 Hz
* IP55 is not recommended for operation in condensing environments.
For operation in such environments, see Operation in condensing
environments on page 16.
21
CM, CME
10
Construction
Motor protection
Shaft seal
Mains-operated motors (CM)

Single-phase motors, 1 x 115/230 V, 60 Hz, do not
incorporate motor protection and must be connected to
a motor-protective circuit breaker which can be
manually reset. Set the motor-protective circuit breaker
according to the rated current of the motor (I1/1).
See nameplate.
The shaft seal for the CM and CME pumps is of the

O-ring type, which makes it very flexible when different
types of O-rings and seal-face materials are needed.
The shaft seal has a fixed seal driver which ensures a
reliable rotation of all parts even under the most
extreme operating conditions.
Other single-phase motors have built-in current- and

temperature-dependent motor protection in accordance
with IEC 60034-11 and require no further motor
protection. The motor protection reacts to both slowand quick-rising temperatures. The motor protection is
automatically reset.
Three-phase motors up to 3 kW must be connected to
a motor-protective circuit breaker which can be
manually reset. Set the motor-protective circuit breaker
according to the rated current of the motor (I1/1).
See nameplate. Motors with power ratings of 3 kW and
up have built-in thermistors (PTC)*. The thermistors are
designed according to DIN 44082. The motor protection
reacts to both slow- and quick-rising temperatures.
Due to the special design of the shaft seal and the

interfaces to the rest of the pump construction, the
dry-running capabilities are improved significantly
compared to most other similar shaft seals and pump
types. Furthermore, improvements have been made to
reduce the risk and effect of sticking. The shaft seal
types available can be found in Selection of shaft seal
on page 36 where the key parameters of selecting a
shaft seal are also described.
Electronically speed-controlled motors (CME)

CME pumps require no external motor protection.
The MGE motor incorporates thermal protection
against steady overload and stalled condition
(IEC 34-11).
Frequency converter operation

All three-phase motors can be connected to a
frequency converter. Depending on the frequency
converter type, this may cause increased acoustic
noise from the motor. Furthermore, it may cause the
motor to be exposed to detrimental voltage peaks.
As standard MG 71- and MG 80-based motors have no
phase insulation and must therefore be protected
against voltage peaks higher than 650 V (peak value)
between the supply terminals.
Note: MG 71- and MG 80-based motors with phase
insulation are available on request.
The above disturbances, i.e. both increased acoustic
noise and detrimental voltage peaks, can be eliminated
by fitting an LC filter between the frequency converter
and the motor.
For further information, please contact the frequency
converter supplier or Grundfos.
22
TM05 1131 2211
* Applies only to supply voltages F, G and O. Motors for

other supply voltages must be connected to a
motor-protective circuit breaker as described for
three-phase motors up to 3 kW.
Fig. 15 Exploded view of shaft seal
Note: The available shaft seals for CM and CME pumps

are very robust and durable, but dry running must
always be avoided.
Details regarding operating conditions for the shaft seal
can be found in Operating range of the shaft seal on
page 16.
Further information about the shaft seal can be found in
the separate data booklet covering shaft seals which
can be downloaded from WebCAPS.
See 27. Further product documentation on page 122.
Title
Publication number
Shaft seals
96519875
CM, CME
10
Construction
CM(E) 1-A
(A = cast iron EN-GJL-200)
TM04 3723 3809
Sectional drawing
Fig. 16 CM(E) 1-3 with MG(E) 71 motor
Components
Pos.
Component
Pos.
Component
Pos.
Component
Discharge part
64c
Clamp
153
Ball bearing
Chamber
66
Washer (NORD-LOCK)
155
Bearing cover plate
Inlet part
67
Nut
156
Fan
11
O-ring
79
Diverting disc
158
Corrugated spring
25
Plug
105
Shaft seal
158a
O-ring
49
Impeller
139b
Gasket
159
O-ring
51
Pump shaft
150
Stator housing
64
Spacing pipe
151
Fan cover
164b, 164e
191
Terminal box
Base plate
23
CM, CME
10
Construction
CM(E) 1-I and CM(E) 1-G

(I = EN 1.4301/AISI 304 and G = EN 1.4401/AISI 316)
TM04 3722 3809
Sectional drawing
Fig. 17 CM(E) 1-3 with MG(E) 71 motor
Components
Pos.
24
Component
Pos.
Component
Pos.
Component
Chamber
64c
Clamp
155
Bearing cover plate
Flange
66
Washer (NORD-LOCK)
156
Fan
16
Sleeve
67
Nut
157a
Gasket
25
Plug
79
Diverting disc
158
Corrugated spring
31
O-ring
105
Shaft seal
158a
O-ring
49
Impeller
150
Stator housing
159
O-ring
51
Pump shaft
151
Fan cover
64
Spacing pipe
153
Ball bearing
164b, 164e
191
Terminal box
Base plate
CM, CME
10
Construction
Material specification
Pump material version
Pos.
Description
Material
Cast iron
(EN-GJL-200)
Stainless steel
(EN 1.4301/AISI 304)
DIN W.-Nr. ISO/AISI/ASTM DIN W.-Nr. ISO/AISI/ASTM
Stainless steel
(EN 1.4401/AISI 316)
DIN W.-Nr.
ISO/AISI/ASTM
Motor parts
156b
Motor flange
150
Stator housing
Cast iron
Silumin (Alu)
151
Fan cover
Composite PBT/PC
153
Ball bearing
156
Fan
Composite PA 66 30 %
GF
158
Corrugated spring
Steel
164b
Terminal box, MG
164e
Terminal box, MGE
Composite PC/ASA or
silumin (Alu)
191
Base plate
79
Diverting disc
Silicone fluid (LSR)
155
Bearing cover plate
PPS
Steel, electro-coated
1.0330.3
1.0330.3
Steel, powder-coated,
60 to 120 , NCS 7005
1.0330.3
Pump parts
Shaft seal, steel parts
Stainless steel
Shaft seal, seal faces
Al2O3/carbon or SiC
51
Pump shaft
Stainless steel
11
31 3)
158a
159
O-rings
EPDM, FKM or FFKM
105
157a 3) Gasket
Paper
139b 4) Gasket
Aramide fibres (nbr)
2 4)
1.4301/
1.44011)
AISI 304/
AISI 316 1)
1.4301/
1.44011)
AISI 304/
AISI 316 1)
1.4401
AISI 316
1.4301
AISI 304
1.4301/
1.44011)
AISI 304/
AISI 316 1)
1.4401
AISI 316
1.4301/
1.44011)
AISI 304/
AISI 316 1)
1.4301/
1.44011)
AISI 304/
AISI 316 1)
1.4401
AISI 316
Discharge part
Cast iron
Inlet part
Cast iron
Chamber
Stainless steel
25
Plug
Stainless steel
1.4404
AISI 316L
1.4404
AISI 316L
1.4404
AISI 316L
Impeller
Stainless steel
1.4301/
1.44011)
AISI 304/
AISI 316 1)
1.4301/
1.44011)
AISI 304/
AISI 316 1)
1.4401
AISI 316
64
Spacing pipe
Stainless steel
1.4401
AISI 316
1.4401
AISI 316
1.4401
AISI 316
64c
Clamp
Stainless steel
STX2000 5)
6 3)
Flange
Cast iron
16
Sleeve
Stainless steel
67
Nut
Stainless steel A4
66
Washer
(NORD-LOCK)
Steel
4)
49
STX2000 5)
1.4301/
1.44011)+2)
1.4547
1.4547
1)
On request.
2)
As standard, the pumps listed below are fitted with sleeves made of stainless steel 1.4401:
CM(E)
CM(E)
CM(E)
CM(E)
STX2000 3)
AISI 304/
AISI 316 1)
1.4401
AISI 316
1.4547
1-9 up to and including CM(E) 1-14

3)
Only in CM(E)-I/G pumps.
4)
Only in CM(E)-A pumps.
5)
STX2000 ~ CrNiMO 22 19 4.
25
CM, CME
11
CME pumps
11. CME pumps

Communication with CME pumps
Communication with CME pumps is possible by means
of
Remote control
The Grundfos R100 remote control is available as an
accessory. See page 119.
The operator can communicate with the CME pump by
pointing the IR-signal transmitter at the control panel of
the terminal box.
a central building management system

a remote control (Grundfos R100)
a control panel.
TM03 0141 4104
Central building management system

The operator can communicate with a CME pump at a
distance. Communication can take place via a central
building management system allowing the operator to
monitor and change control modes and setpoint
settings.
Fig. 18 R100 remote control
The operator can monitor and change control modes

and settings of the CME pump with the R100.
Control panel
The operator can change the setpoint settings manually
on the control panel of the CME pump terminal box.
TM00 7600 0404
LON, PROFIBUS, Modbus, GSM, GRM or

BACnet network
Fig. 19 Control panel of a CME pump

100:
150:
200:
250:
270:
300:
LON
Profibus DP
Modbus RTU
GSM
GRM
BACnet MS/TP
CME pump
26
TM04 6090 4909
CIU
CIU
CIU
CIU
CIU
CIU
CM, CME
11
H
Affinity equations
Normally, CME pumps are used in applications
characterised by a variable flow. Consequently, it is not
possible to select a pump that is constantly operating at
its optimum efficiency.
Q
n
n
n
-------- -----Q
n
x
x
Hn
Hx
H
n n 2
n
------- ------
H
n x
x
nn
nx
In order to achieve optimum operating economy, the

duty point should be close to the optimum efficiency
(eta) for most operating hours.
Eta
Between the min. and max. performance curves, CME

pumps have an infinite number of performance curves,
each representing a specific speed. It may therefore not
be possible to select a duty point close to the max.
curve.
Q
Qx
Qn
nx
n
------- 1
nn
H
[m]
Q
P
Qx
Qn
P
n n 3
------n- -----
P
n x
x
nn
Pn
nx
Px
Q [m/h]
TM01 4916 4803
Min. curve
Fig. 20 Min. and max. performance curves
In situations where it is not possible to select a duty

point close to the max. curve, use the affinity equations
below. The head (H), the flow rate (Q) and the input
power (P) are the appropriate variables for calculating
the motor speed (n).
Note: The approximated formulas apply on condition
that the system characteristic remains unchanged for
nn and nx and that it is based on the formula H = k x Q2
where k is a constant.
The power equation implies that the pump efficiency is
unchanged at the two speeds. In practice, this is not
quite correct.
Finally, it is worth noting that the efficiency of the
frequency converter and the motor must be taken into
account if a precise calculation of the power saving
resulting from a reduction of the pump speed is wanted.
TM00 8720 3496
Max. curve
CME pumps
Speed control of CME pumps
Fig. 21 Affinity equations
Legend
Hn
Hx
Qn
Qx
nn
nx
n
x
Rated head in metres

Current head in metres
Rated flow rate in m3/h
Current flow rate in m3/h
Rated motor speed in min -1
Current motor speed in min-1
Rated efficiency in %
Current efficiency in %
WinCAPS and WebCAPS

WinCAPS and WebCAPS are selection programs
offered by Grundfos.
The two programs make it possible to calculate the
specific duty point and energy consumption of a CME
pump.
When you enter the dimensions of the pump, WinCAPS
and WebCAPS can calculate the exact duty point and
energy consumption.
For further information, see page 122.
27
CM, CME
12
Grundfos CUE
12. Grundfos CUE

CM pumps connected to Grundfos
CUE, external frequency
converters
Functions
Intuitive startup guide
The startup guide enables easy installation and
commissioning as well as plug-and-pump convenience.
Few settings need to be made by the installer as the
rest is done automatically or preset from the factory.
GrA4404
TM04 3283 4108
Smart user interface
Fig. 22 Grundfos CUE product range
Grundfos CUE is a complete range of frequency

converters for pump control in a wide range of
applications. Grundfos CUE is designed for wall
mounting.
Grundfos CUE provides a variety of benefits to the
end-user.
The benefits include
Grundfos CME pump functionality and user
interface
application- and pump family-related functions
increased comfort compared to mains-operated
pump solutions
simple installation and commissioning compared to
standard frequency converters.
Fig. 23 Grundfos CUE control panel
Grundfos CUE features a unique user-friendly control

panel with graphic display and easy-to-use buttons.
Panel layout resembles the well-known Grundfos R100
remote control, which is used with Grundfos CME
pumps.
Controlling the value you choose
Grundfos CUE has a built-in PI controller offering
closed-loop control of a desired value.
The values include
constant differential pressure
proportional pressure
constant temperature
constant flow.
Wide product range
The CUE product range is quite comprehensive,
covering five different voltage ranges, enclosure
classes IP20/21 (NEMA 1) and IP54/55 (NEMA 12),
and a wide range of output powers.
The table below provides a general overview.
28
Input voltage
[V]
Output voltage
[V]
Motor
[kW]
1 x 200-240
3 x 200-240
1.1 - 7.5
3 x 200-240
3 x 200-240
0.75 - 45
3 x 380-500
3 x 380-500
0.55 - 250
3 x 525-600
3 x 525-600
0.75 - 7.5
CM, CME
13
Approvals
CB certificate, IEC countries.
C-tick mark, New Zealand and Australian EMC.
cULus
The cULus approval covers the following supply
voltages:
1 x 115/230 V, 60 Hz (supply voltage B)
3 x 208-230/440-480 V, 60 Hz (supply voltage E)
3 x 575 V, 60 Hz (supply voltage H).
UL
The UL approval covers the following supply voltages:
1 x 115/230 V, 60 Hz (supply voltage B1)
3 x 208-230/440-480 V, 60 Hz (supply voltage E1)
3 x 400 V, 50/60 Hz (supply voltage I)
EC declaration of conformity
Machinery Directive (2006/42/EC).
Standards used:
EN 809: 2008 and EN 60204-1: 2006.
Low Voltage Directive (2006/95/EC).
Applicable when the rated power is lower than 2.2 kW.
Standards used:
EN 60335-1: 2002 and EN 60335-2-51: 2003.
EMC Directive (2004/108/EC).
Ecodesign Directive (2009/125/EC).
Electric motors:
Commission Regulation No. 640/2009.
Applies only to three-phase Grundfos motors
marked IE2 or IE3. See motor nameplate.
Standard used: EN 60034-30: 2009.
Other approvals and compliance with

directives
3 x 380-415 V, 50 Hz/3 x 440-480 V, 60 Hz

(supply voltage J).
GOST (Russia)
Note: The above voltages are planned to be

cULus-approved during 2012.
PSE
Pumps
UL778 and C22.2 No 108-01
Drinking water approvals
NEMA 250 (IP code).

Overheating protection
UL2111 and C22.2 No 77-95.
cURus motors
CME motors comply with UL508C and C22.2 No 14.
The cURus approval covers the following supply
voltages:
Approvals and markings
13. Approvals and markings
Compliance with RoHS, directive 2002/96/EC

Kemco.
WRAS
ACS
NSF61.
Markings
C-tick
3 x 380-480 V, 50/60 Hz (supply voltage L)

3 x 460-480 V, 60 Hz (supply voltage N)
CE
1 x 208-230 V, 50/60 Hz (supply voltage M)

3 x 208-230 V, 50/60 Hz (supply voltage Q).
cULus
cURus
UL
29
CM, CME
14
Certificates
14. Certificates
Certificate
Certificate of compliance with the order
Test certificate. Non-specific inspection and testing
Inspection certificate 3.1
Inspection certificate
Standard test report

Material specification report
Material specification report with certificate from raw
material supplier
Duty-point verification report
Surface-roughness
Vibration report
Motor test report
Cleaned and dried pump
Electro-polished pump
Description
According to EN 10204, 2.1. Grundfos document certifying that the pump supplied is in
compliance with the order specifications.
According to EN 10204, 2.2. Certificate with inspection and test results of a non-specific
pump.
Grundfos document certifying that the pump supplied is in compliance with the order
specifications. Inspection and test results are mentioned in the certificate.
Grundfos document certifying that the pump supplied is in compliance with the order
specifications. Inspection and test results are mentioned in the certificate. Certificate from the
surveyor is included.
We offer the following inspection certificates:
Lloyds Register of Shipping (LRS)
Det Norske Veritas (DNV)
Germanischer Lloyd (GL)
Bureau Veritas (BV)
American Bureau of Shipping (ABS)
Registro Italiano Navale Agenture (RINA)
China Classification Society (CCS)
Russian maritime register of Shipping (RS)
Biro Klassifikasio Indonesia (BKI)
United States Coast Guard (USCG)
Nippon Kaiji Koykai (NKK)
Certifies that the main components of the specific pump are manufactured by Grundfos, and
that the pump has been QH-tested, inspected and conforms to the full requirements of the
appropriate catalogues, drawings and specifications.
Certifies the material used for the main components of the specific pump.
Certifies the material used for the main components of the specific pump. A material
certificate, EN 10204, 3.1, will be supplied for each main component.
Certifies a test point specified by the customer. Issued according to ISO 9906 concerning
"Duty point verification".
Shows the measured roughness of the cast pump base of the specific pump. The report
indicates the values measured at the base inlet and outlet according to ISO 1302.
Vibration report indicating the values measured during the performance test of the specific
pump according to ISO 10816.
Shows the performance test of the specific motor, including power output, current,
temperature, stator windings resistance and insulation test.
Confirms that the specific pump has been cleaned and dried, and how it was done.
Confirms that the specific pump has been electro-polished. The maximum surface roughness
is specified in the report.
Examples of the certificates are shown on pages 31 to 33.

Note: Other certificates are available on request.
30
CM, CME
14
Certificates
Examples of certificates
Test certificate
Test certificate
Non-specific inspection and testing
EN 10204 2.1
EN 10204 2.2
Customer name
Customer order no.
Customer TAG no.
GRUNDFOS order no.
Customer name
Customer order no.
Customer Tag no.
GRUNDFOS order no.
Product type
Pump
Pump type
Motor make
Flow
Head
Power P2
Voltage
Frequency
Full load current
Motor speed
We the undersigned hereby guarantee and certify that the materials and/or parts for the
above mentioned product were manufactured, tested, inspected, and conform to the full requirements of the appropriate catalogues, drawings and/or specifications relative thereto.
Part number
Part number
m3/h
m
kW
V
Hz
A
min -1
Signature:
Name:
Dept.:
Part no. 96 50 78 95/1001002
GRUNDFOS
Date:
Signature:
Name:
Dept.:
Part no 96 50 78 96/1001002
Inspection certificate 3.1
Inspection certificate
Inspection certificate.
Inspection certificate.
EN 10204 3.1
Motor
Make
Part number
Serial No.
P2 (kW)
Voltage (V)
Current (A)
n(min-1)
Frequency (Hz)
Insulation class
Power factor
Din / W. - No.
Base/Pump head cover
Impeller/guidevanes
Shaft/sleeve
Customers requirements
Flow rate (m3/h)
Test result ref. requirements
Q(m3/h)
H(m)
I(A)
Motor
Make
Part number
Serial No.
P2 (kW)
Voltage (V)
Current (A)
n(min-1)
Frequency (Hz)
Insulation class
Power factor
Din / W. - No.
Base/Pump head cover
Impeller/guidevanes
Shaft/sleeve
Head (m)
n(min-1)
Russian Maritime Register of Shipping ( RS )
Pump
Pump type
Part number
Serial no.
Flow rate (m3/h)
Head (m)
Max. ope. P/t (bar / C)
Service
Medium
Customers requirements
Flow rate (m3/h)
P1(kW)
Test result ref. requirements

Q(m3/h)
H(m)
Bar no leaks or deformation observed
Hydrostatic test
GRUNDFOS
Date:
Signature:
Name:
Dept.:
Part no. 96 50 78 97/1014142
Head (m)
n(min-1)
I(A)
P1(kW)
Bar no leaks or deformation observed
The pump has been marked

Surveyor signature:
Tested date:
GRUNDFOS
Date:
Signature:
Name:
Dept.:
Part no. 96 50 79 25/1014142
TM03 4156 3607
Manufactured by
GRUNDFOS order no.
GRUNDFOS DUT id.
Customer order no.
Customer name
and address
Shipyard / factory
Ship / new building
Customer TAG no.
Classifying society
GRUNDFOS authorized department
Pump
Pump type
Part number
Serial no.
Flow rate (m3/h)
Head (m)
Max. ope. P/t (bar / C)
Hydrostatic test
Russian Maritime Register of Shipping
TM03 4162 3607
Manufactured by
GRUNDFOS order no.
GRUNDFOS DUT id.
Customer order no.
Customer name
and address
Shipyard / factory
Ship / new building
Customer TAG no.
Classifying society
TM03 4163 1706
GRUNDFOS
Date:
TM03 4165 1706
above mentioned product were manufactured, tested, inspected, and conform to the full
requirements of the appropriate catalogues, drawings and / or specifications relative thereto.
31
CM, CME
14
Certificates
Material specification report.

Customer name
Customer order no.
Customer TAG no.
GRUNDFOS order no.
Pump type
GRUNDFOS DUT id.
Part number
Production code
Customer name
Customer order no.
Customer Tag no.
GRUNDFOS order no.
Product type
GRUNDFOS DUT id.
Part number
above mentioned product were manufactured by GRUNDFOS, tested, inspected, and conform to the full requirements of the appropriate catalogues, drawings and/or specifications
relative thereto.
The attached test result is from the above mentioned pump.
Pump
Pump head
Pump head cover
Shaft
Impeller
Chamber
Outer sleeve
Base
Materials
DIN W.-Nr.
AISI / ASTM
Signature:
Name:
Dept.:
Part no. 96 50 79 30 P01 /A72775
GRUNDFOS
Date:
Signature:
Name:
Dept.:
Part no 96 50 79 28/A72775
Material specification report with certificate from raw material

supplier
Duty-point verification report

with EN10204 3.1
material certificate from raw
material supplier
Duty point verification report
Customer name
Customer order no.
Customer Tag no.
GRUNDFOS order no.
Product type
GRUNDFOS DUT id.
Part number
Customer name
Customer order no.
Customer TAG no.
GRUNDFOS order no.
Pump type
GRUNDFOS DUT id.
Part number
Production code
Pump
Pump head
Pump head cover
Shaft
Impeller
Chamber
Outer sleeve
Base
TM03 4150 1706
GRUNDFOS
Date:
TM03 4143 1706
above mentioned product were manufactured by GRUNDFOS, tested, inspected, and conform to the full requirements of the appropriate catalogues, drawings and/or specifications
relative thereto.
Raw materiel no.
Supplier certificate no.
Signature:
Name:
Dept.:
Part no 96 50 79 29/A72775
32
GRUNDFOS
Date:
Signature:
Name:
Dept.:
Part no. 96 53 96 99 /A72775
TM03 4148 1706
GRUNDFOS
Date:
TM03 4149 3607
CM, CME
Motor test report
Clean and dried pump
Motor test report
Cleaned and dried pump
Customer name
Customer order no.
Customer Tag no.
GRUNDFOS order no.
GRUNDFOS DUT id.
Part number
Motor no.
Motor serie no.
Certificates
14
Customer name
Customer order no.
Customer TAG no.
GRUNDFOS order no.
Pump type
GRUNDFOS DUT id.
Part number
Production code
We the undersigned hereby guarantee and certify that the above motor has been tested.
The performance of the motor can be seen in the motor test report on the next page.
GRUNDFOS hereby confirms that the pump mentioned above is manufactured according the
specifications mentioned in the CR, CRI, CRN Custom-built pumps data booklet. This means
that prior to assembly, pump components are washed in pure, hot soap water, rinsed in deionized water and dried.
The pump is wrapped in a plastic bag before being packed.
Signature:
Name:
Dept.:
Part no. 96 50 79 33 /A72775
GRUNDFOS
Date:
Signature:
Name:
Dept.:
Part no 96 50 79 34/A72775
TM03 4145 1706
GRUNDFOS
Date:
TM03 4146 1706
The pump has not been performance-tested.
Customer name
Customer order no.
Customer TAG no.
GRUNDFOS order no.
Pump type
GRUNDFOS DUT id.
Part number
Production code
Grundfos hereby conforms that the pump mentioned above is manufactured according to the
specifications mention in the CR, CRI, CRN Custom-built pumps data booklet. This means
that prior to asembly, pump components are electro-polished in a mixture of sulphuric acid
and phosphoric acid. Finally the components are passivated in nitric acid.
The CRN1s, 1, 3, 5, 10, 15, and 20 casted parts are all mechanically polished before being
electropolished.
The pump will then optain following surface roughness;
________________________________________________________________________
Pump type
Stainless steel
casted parts
Stainless steel
Surface
plate and other
roughness
non casted parts
( m )
________________________________________________________________________
CRN1s, 1, 3, 5
*
*
equal to or below 0,8
_______________________________________________________________________
CRN10, 15, 20
*
*
________________________________________________________________________
*
between 10 15
*

GRUNDFOS
Date:
Signature:
Name:
Dept.:
Part no 96 50 79 35/A72775
TM03 4144 1706
CRN32, 45, 64, 90
33
CM, CME
15
Selection of pumps
Dimensional data
When sizing a pump, take the following factors into
account:
Selection of pumps should be based on these

elements:
Required flow and pressure at the draw-off point.
the duty point of the pump (see below)

dimensional data such as pressure loss as a result
of height differences, friction loss in the pipework,
pump efficiency, etc. (see below)
pump materials (see page 35)
pump connections (see page 35)
Duty point of the pump

From a duty point it is possible to select a pump on the
basis of the curve charts starting on page 38.
p
H
[kPa] [m]
100
-6
Hgeo
-5
80
NPSH
-4
60
50
-3
40
-2
30
200
Hf
-7
70
400
Required flow and

pressure
ISO 9906 Annex A
90
600
* See Selection of CME pumps on page 36 for further information about

sizing CME pumps.
50 Hz
-8
120
110
800
NPSH value.
For calculation of the NPSH value, see Minimum
inlet pressure, NPSH on page 17.
CM 10
130
1000
Friction loss in the pipework (Hf).

It may be necessary to account for pressure loss in
connection with long pipes, bends or valves, etc.
Best efficiency at the estimated duty point.*
shaft seal (see page 36).
1200
Pressure loss as a result of height differences

(Hgeo).
TM04 3486 4508
Selection and sizing
15. Selection and sizing
20
Fig. 25 Dimensional data
-1
10
P2
[kW]
5
4
3
2
1
0
0
0.0
10
8
6
4
2
0
0.5
1.0
6
1.5
2.0
10
2.5
11
12
3.0
13
3.5
14
Pump efficiency
When sizing the pump, the efficiency (eta) should be
considered so that the pump will operate at or near its
maximum efficiency, for instance on the right-hand side
in the curve example in fig. 26.
Q [m/h]
4.0
Q [l/s]
-8
-7
-6
-5
-4
-3
-2
-1
p NPSH
[kPa] [m]
80
60
40
20
0
10
11
12
13
Eta
Q [m/h] Eta
[%]
14
Q [m/h]
14
NPSH
0
10
11
12
13
50
40
30
20
10
0
Eta
Q [ m3 /h ]
Fig. 24 Example of a curve chart
TM00 9190 1303
TM04 6404 0210
Fig. 26 Best efficiency
Before determining the best efficiency point, the

operation pattern of the pump needs to be identified.
If the pump is expected to operate at the same duty
point, then select a CM pump which is operating at a
duty point corresponding with the best efficiency of the
pump. The example in fig. 27 shows how to check the
pump efficiency when selecting a CM pump.
34
CM, CME
15
CM 10
130
ISO 9906 Annex A

-7
110
1000
100
-6
90
800
-3
40
-2
30
200
Tri-Clamp
-4
60
50
400
Duty
point
-5
80
70
600
50 Hz
-8
120
20
DIN, JIS, ANSI flange
-1
10
0
P2
[kW]
5
4
3
2
1
0
10
8
6
4
2
0
0.5
1.0
6
1.5
2.0
10
2.5
11
12
3.0
13
3.5
14
Q [m/h]
4.0
Q [l/s]
Victaulic coupling
-8
-7
-6
-5
-4
-3
-2
Fig. 28 Examples of pump connections
Best
efficiency
-1
p NPSH
[kPa] [m]
80
60
40
20
0
0.0
10
11
12
13
Eta
Q [m/h] Eta
[%]
14
Q [m/h]
14
NPSH
0
10
11
12
13
TM04 6404 0210
TM04 3937 0409
1200
Pump connections
p
H
[kPa] [m]
50
40
30
20
10
0
Fig. 27 Example of a CM pumps duty point
Selection of pump connection depends on the rated

pressure and pipework. To meet any requirement, the
CM and CME pumps offer a wide range of flexible
connections such as:
Tri-Clamp
DIN flange
ANSI flange
Pump materials
Select the material variant on the basis of the liquid to
be pumped. The table below gives a general
recommendation regarding selection of pump material.
JIS flange
Victaulic coupling
Whitworth thread Rp
internal NPT thread.
Liquid to be pumped
Material in contact
with pump media
Clean, non-aggressive liquids Cast iron*

such as potable water and oils (EN-GJL-200)
Stainless steel
(EN 1.4301/AISI 304)
Industrial liquids and acids
Stainless steel
(EN 1.4401/AISI 316)
*
Pump type
CM(E)-A
CM(E)-I
CM(E)-G
The impeller, chamber and filling plugs are made of stainless steel
(EN 1.4301/AISI 304).
The pump shaft is made of stainless steel (EN 1.4057/AISI 431).
For more specific selection based on the pumped liquid,

see List of pumped liquids on page 18, or contact
Grundfos.
35
CM, CME
15
Selection of shaft seal
TM04 3934 0409
As standard, the CM and CME pumps are fitted with a

Grundfos O-ring type shaft seal with fixed driver
suitable for the most common applications.
Fig. 29 Shaft seal (O-ring type with fixed driver)
The table below shows the available shaft seal types for
CM and CME pumps.
Pump type
CM, CME
Shaft seal type
Material
Rubber parts
AQQE
AQQV
AQQK
AQBE
AQBV
AVBE
AVBV
Stainless steel
EPDM (E)
FKM (V)
FFKM
These key parameters must be taken into account

when selecting the shaft seal:
type of pumped liquid
liquid temperature
maximum pressure.
Use the curve in fig. 12 on page 16 to select a suitable
shaft seal. If the pumped liquid differs from water, a
suitable shaft seal can be found in List of pumped
liquids on page 18.
Note: The list should be applied with some caution, as
factors such as concentration of the pumped liquid,
liquid temperature or pressure may affect the chemical
resistance of a specific pump version.
Selection of CME pumps

CME pumps are normally used in applications
characterised by a variable flow. Consequently, it is not
possible to select a pump that is constantly operating at
its optimum efficiency. In order to achieve optimum
operating economy, the duty point should therefore be
close to the optimum efficiency (eta) for most operating
hours.
For further information, see 11. CME pumps on
page 26.
Note: Irrespective of the input frequency, the 100 %
speed of CME pumps is approximately 3400 min-1.
See CME performance curves on pages 50 to 55.
36
CM, CME
16
p
[kPa]
Pump type, speed, frequency and ISO standard.
H
[m]
CM 5
130
1200
120
-13
2900 rpm
-12
ISO 9906 Annex A
50 Hz
110
1000
QH curve for the individual pump.

The bold curves indicate the
recommended duty range for best
efficiency.
-11
100
-10
90
-9
800
80
-8
70
Number of stages.
600
400
200
How to read the curve charts
16. How to read the curve charts
-7
60
-6
50
-5
40
-4
30
-3
20
-2
10
0
0
0.0
P2
[kW]
The power curves indicate

the pump input power (P2)
based on the number of
stages and related to the
actual flow.
0.5
0.0
1.0
0.2
1.5
0.4
2.0
2.5
0.6
3.0
0.8
3.5
4.0
1.0
4.5
1.2
5.0
5.5
1.4
6.0
Q [m/h]
The eta curve shows the efficiency of

the pump. The eta curve is an average
curve of all available stages and pump
material variants shown in the chart.
Q [l/s]
1.6
-13
-12
-11
-10
-9
-8
-7
-6
-5
-4
-3
-2
2.5
2.0
1.5
1.0
0.5
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
10
80
60
40
20
Q [m/h]
Eta
[%]
50
Eta
40
30
NPSH
The NPSH curve is an average

curve for all the variants shown.
When sizing the pumps, add a
safety margin of at least 0.5 m.
20
10
0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
Q [m/h]
TM04 3336 0210
0.0
p NPSH
[kPa] [m]
Fig. 30 How to read the curve charts
Guidelines to performance curves
Tolerances to ISO 9906, Annex A, if indicated.

Measurements have been made with airless water
at a temperature of +20 C.
The curves apply to the following kinematic
viscosity: = 1 mm2/s (1 cSt).
The QH curves apply to fixed speeds of 2900 min-1
(50 Hz) and 3480 min-1 (60 Hz).
Note: Please refer to WebCAPS for pump curves
which include the characteristic of the selected
motor. In WebCAPS, it is also possible to adjust the
curves depending on the density and viscosity.
The conversion between head H (m) and
pressure p (kPa) applies to a water density of
= 1000 kg/m3.
Due to the risk of overheating, the pumps should not

be used at a flow below the minimum flow rate.
The curve in fig. 31 shows the minimum flow rate as
a percentage of the rated flow rate in relation to the
liquid temperature.
Qmin
[%]
30
20
10
0
40
60
80 100 120 140 160 180
t [C ]
TM04 3791 5005
The guidelines below apply to the curves shown on the

following pages:
Fig. 31 Minimum flow rate
37
17
CM 1
50 Hz
Performance curves, CM 50 Hz

CM 1
p
[kPa]
H
[m]
CM 1
130
1200
-14
120
2900 rpm
50 Hz
-13
ISO 9906 Annex A

1000
110
-12
100
-11
-10
90
800
-9
80
-8
70
-7
600
60
-6
50
400
200
-5
40
-4
30
-3
20
-2
10
0
0.0
P2
[kW]
0.2
0.0
0.4
0.6
0.1
0.8
0.2
1.0
1.2
0.3
1.4
1.6
0.4
1.8
2.0
0.5
2.2
2.4
0.6
0.7
Q [l/s]
-14
-13
-12
-11
-10
-9
-8
-7
-6
-5
-4
-3
-2
1.0
0.8
0.6
0.4
0.2
0.0
0.0
p NPSH
[kPa] [m]
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
2.2
2.4
Q [m/h]
Eta
[%]
160
16
120
12
30
80
20
40
40
Eta
10
NPSH
0
0.0
CM-A
CM-I/G
38
Q [m/h]
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
2.2
2.4
Q [m/h]
TM04 3334 0210
17
CM 3
50 Hz
CM 3
p
[kPa]
H
[m]
1200
2900 rpm
-13
120
50 Hz
ISO 9906 Annex A
-12
110
1000
CM 3
-14
130
-11
100
-10
90
-9
800
80
-8
70
600
-7
60
-6
50
400
200
-5
40
-4
30
-3
20
-2
10
0
0.0
P2
[kW]
0.4
0.0
0.8
1.2
0.2
1.6
2.0
0.4
2.4
0.6
2.8
3.2
0.8
3.6
4.0
1.0
Q [m/h]
1.2
Q [l/s]
-14
-13
-12
-11
-10
-9
-8
-7
-6
-5
-4
-3
-2
1.6
1.2
0.8
0.4
0.0
0.0
p NPSH
[kPa] [m]
0.4
0.8
1.2
1.6
2.0
2.4
2.8
3.2
3.6
4.0
Q [m/h]
Eta
[%]
80
60
30
40
20
20
Eta 1
40
10
NPSH
0
0.0
0.4
0.8
1.2
1.6
2.0
2.4
2.8
3.2
3.6
4.0
Q [m/h]
TM04 3335 0210
CM-A
CM-I/G
39
17
CM 5
50 Hz
CM 5
p
[kPa]
H
[m]
CM 5
130
1200
120
-13
2900 rpm
-12
ISO 9906 Annex A
50 Hz
110
1000
-11
100
-10
90
-9
800
80
-8
70
600
400
200
-7
60
-6
50
-5
40
-4
30
-3
20
-2
10
0
0
0.0
P2
[kW]
0.5
0.0
1.0
0.2
1.5
0.4
2.0
2.5
0.6
3.0
0.8
3.5
4.0
1.0
4.5
1.2
5.0
5.5
1.4
6.0
Q [m/h]
Q [l/s]
1.6
-13
-12
-11
-10
-9
-8
-7
-6
-5
-4
-3
-2
2.5
2.0
1.5
1.0
0.5
0.0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
p NPSH
[kPa] [m]
10
8
60
Eta
50
40
30
NPSH
40
20
10
0
0.0
CM-A
CM-I/G
40
Eta
[%]
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
20
5.0
5.5
6.0
Q [m/h]
TM04 3336 0210
80
Q [m/h]
17
CM 10
50 Hz
CM 10
p
[kPa]
H
[m]
CM 10
130
1200
-8
50 Hz
ISO 9906 Annex A
-7
110
1000
2900 rpm
120
100
-6
90
800
-5
80
70
-4
600
60
50
400
-3
40
-2
30
200
20
-1
10
0
0
0
P2
[kW]
0.0
0.5
1.0
6
1.5
2.0
10
2.5
11
12
3.0
13
3.5
14
Q [m/h]
4.0
Q [l/s]
-8
-7
-6
-5
4
3
-4
-3
-2
2
1
-1
0
0
p NPSH
[kPa] [m]
10
11
12
13
14
Q [m/h]
Eta
10
Eta
[%]
50
80
40
60
30
40
20
10
0
10
11
12
13
14
Q [m/h]
TM04 3337 0210
20
NPSH
CM-A
CM-I/G
41
17
CM 15
50 Hz
CM 15
p
[kPa]
H
[m]
70
CM 15
-4
2900 rpm
65
600
50 Hz
ISO 9906 Annex A
60
55
500
-3
50
45
400
40
-2
35
300
30
25
200
20
-1
15
100
10
5
0
0
P2
[kW]
10
12
3
14
16
18
20
Q [m/h]
6
Q [l/s]
5
-4
-3
3
2
-2
-1
0
0
p NPSH
[kPa] [m]
12
80
40
10
12
14
16
18
20
Q [m/h]
Eta
Eta
[%]
60
40
20
NPSH
0
0
CM-A
CM-I/G
42
10
12
14
16
18
20
Q [m/h]
TM04 3338 0210
120
17
CM 25
50 Hz
CM 25
p
[kPa]
H
[m]
CM 25
75
700
70
2900 rpm
-4
50 Hz
65
600
ISO 9906 Annex A
60
55
500
-3
50
45
400
40
-2
35
300
30
25
200
20
-1
15
100
10
5
0
0
P2
[kW]
10
12
3
14
16
18
20
22
24
26
28
Q [m/h]
8
Q [l/s]
8
-4
-3
-2
-1
0
0
p NPSH
[kPa] [m]
12
80
40
10
12
14
16
18
20
22
24
26
28
Q [m/h]
Eta
Eta
[%]
60
40
NPSH
20
0
10
12
14
16
18
20
22
24
26
28
Q [m/h]
TM04 3339 0210
120
CM-A
CM-I/G
43
18
CM 1
60 Hz

CM 1
p
[kPa]
1200
H
[m]
CM 1
120
-9
3480 rpm
-8
ISO 9906 Annex A
60 Hz
110
1000
100
-7
90
800
80
-6
70
600
-5
60
-4
50
400
-3
40
30
200
-2
20
10
0
0.0
P2
[kW]
0.2
0.0
0.4
0.6
0.1
0.8
0.2
1.0
1.2
0.3
1.4
1.6
0.4
1.8
2.0
0.5
2.2
2.4
0.6
2.6
0.7
2.8
Q [m/h]
0.8
1.2
Q [l/s]
-9
-8
-7
-6
-5
-4
-3
-2
1.0
0.8
0.6
0.4
0.2
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
2.2
2.4
2.6
2.8
Q [m/h]
160
16
120
12
30
80
20
40
40
Eta
10
NPSH
0
0.0
CM-A
CM-I/G
44
Eta
[%]
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
2.2
2.4
2.6
2.8
Q [m/h]
TM04 3370 0210
0.0
p NPSH
[kPa] [m]
18
CM 3
60 Hz
CM 3
p
[kPa]
1200
H
[m]
3480 rpm
110
1000
CM 3
-9
120
60 Hz
-8
ISO 9906 Annex A
100
-7
90
800
-6
80
70
600
-5
60
-4
50
400
-3
40
30
200
-2
20
10
0
0.0
0.5
0.0
1.0
0.2
1.5
0.4
2.0
2.5
0.6
3.0
0.8
3.5
4.0
1.0
4.5
1.2
Q [m/h]
5.0
Q [l/s]
1.4
P2
[kW]
2.0
-9
-8
-7
-6
-5
-4
-3
-2
1.6
1.2
0.8
0.4
0.0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
p NPSH
[kPa] [m]
10
Q [m/h]
Eta
[%]
50
Eta
80
40
60
30
40
20
10
0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
Q [m/h]
TM04 3371 0210
20
NPSH
CM-A
CM-I/G
45
18
CM 5
60 Hz
CM 5
p
[kPa]
1200
H
[m]
CM 5
120
3480 rpm
110
60 Hz
-8
ISO 9906 Annex A

1000
100
-7
90
800
-6
80
70
600
-5
60
-4
50
400
-3
40
30
200
-2
20
10
0
0.0
P2
[kW]
0.0
0.5
1.0
0.2
1.5
0.4
2.0
2.5
0.6
3.0
0.8
3.5
4.0
1.0
4.5
1.2
5.0
5.5
1.4
6.0
1.6
6.5
1.8
7.0
Q [m/h]
2.0
3.0
Q [l/s]
-8
-7
-6
-5
-4
-3
-2
2.5
2.0
1.5
1.0
0.5
0.0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
p NPSH
[kPa] [m]
60
40
20
Q [m/h]
Eta
[%]
50
40
30
NPSH
20
10
0
0.0
CM-A
CM-I/G
46
7.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
Q [m/h]
TM04 3372 0210
6.5
Eta
10
80
6.0
18
CM 10
60 Hz
CM 10
p
[kPa]
1200
H
[m]
CM 10
120
3480 rpm
-5
60 Hz
110
ISO 9906 Annex A

1000
100
-4
90
800
80
-3
70
600
60
50
400
-2
40
30
-1
200
20
10
0
0
P2
[kW]
0.0
0.5
1.0
6
1.5
2.0
10
2.5
11
12
3.0
13
3.5
14
15
4.0
16
4.5
Q [m/h]
Q [l/s]
-5
-4
-3
-2
-1
0
0
10
11
12
13
14
15
16
Q [m/h]
p NPSH
[kPa] [m]
12
80
40
60
Eta
40
20
NPSH
0
0
10
11
12
13
14
15
16
Q [m/h]
TM04 3373 0210
120
Eta
[%]
CM-A
CM-I/G
47
18
CM 15
60 Hz
CM 15
p
[kPa]
H
[m]
75
700
CM 15
-3
3480 rpm
70
60 Hz
65
600
ISO 9906 Annex A
60
55
500
-2
50
45
400
40
35
300
30
-1
25
200
20
15
100
10
5
0
0
P2
[kW]
10
12
3
14
16
18
20
22
24
Q [m/h]
7
Q [l/s]
-3
-2
-1
0
0
10
12
14
16
18
20
22
24
Q [m/h]
p NPSH
[kPa] [m]
120
12
80
Eta
[%]
Eta
60
40
40
20
0
0
CM-A
CM-I/G
48
10
12
14
16
18
20
22
24
Q [m/h]
TM04 3374 0210
NPSH
18
CM 25
60 Hz
CM 25
p
[kPa]
H
[m]
CM 25
65
600
3480 rpm
60
60 Hz
ISO 9906 Annex A
55
500
-2
50
45
400
40
35
300
30
-1
25
200
20
15
100
10
5
0
0
P2
[kW]
10
12
3
14
16
18
20
22
24
26
28
30
8
32
34 Q
[m/h]
Q [l/s]
-2
4
-1
2
0
0
10
12
14
16
18
20
22
24
26
28
30
32
34 Q
[m/h]
p NPSH
[kPa] [m]
160
Eta
[%]
Eta
15
60
120
10
40
40
NPSH
20
0
10
12
14
16
18
20
22
24
26
28
30
32
34 Q
[m/h]
TM04 3375 0210
80
CM-A
CM-I/G
49
19
CME 1
50/60 Hz
Performance curves, CME 50/60 Hz
19. Performance curves, CME 50/60 Hz

CME 1
p
[kPa]
1200
H
[m]
CME 1
120
-9
3480 rpm
-8
ISO 9906 Annex A
50/60 Hz
110
1000
100
-7
90
800
80
-6
70
600
-5
60
-4
50
400
-3
40
30
200
-2
20
10
0
0.0
P2
[kW]
0.2
0.0
0.4
0.6
0.1
0.8
0.2
1.0
1.2
0.3
1.4
1.6
0.4
1.8
2.0
0.5
2.2
2.4
0.6
2.6
0.7
2.8
Q [m/h]
0.8
1.2
Q [l/s]
-9
-8
-7
-6
-5
-4
-3
-2
1.0
0.8
0.6
0.4
0.2
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
2.2
2.4
2.6
2.8
Q [m/h]
Eta
[%]
160
16
120
12
30
80
20
40
40
Eta
10
NPSH
0
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
2.2
2.4
CME-A
CME-I/G
50
2.6
2.8
Q [m/h]
TM04 3569 0210
0.0
p NPSH
[kPa] [m]
19
CME 3
50/60 Hz
CME 3
p
[kPa]
1200
H
[m]
3480 rpm
110
1000
CME 3
-9
120
50/60 Hz
-8
ISO 9906 Annex A
100
-7
90
800
-6
80
70
600
-5
60
-4
50
400
-3
40
30
200
-2
20
10
0
0.0
0.5
0.0
1.0
0.2
1.5
0.4
2.0
2.5
0.6
3.0
0.8
3.5
4.0
1.0
4.5
1.2
Q [m/h]
5.0
Q [l/s]
1.4
P2
[kW]
2.0
-9
-8
-7
-6
-5
-4
-3
-2
1.6
1.2
0.8
0.4
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
10
Q [m/h]
Eta
[%]
50
Eta
80
40
60
30
40
20
20
NPSH
10
0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
Q [m/h]
TM04 3570 0210
0.0
p NPSH
[kPa] [m]
CME-A
CME-I/G
51
19
CME 5
50/60 Hz
CME 5
p
[kPa]
1200
H
[m]
CME 5
120
3480 rpm
110
50/60 Hz
-8
ISO 9906 Annex A

1000
100
-7
90
800
-6
80
70
600
-5
60
-4
50
400
-3
40
30
200
-2
20
10
0
0.0
P2
[kW]
0.0
0.5
1.0
0.2
1.5
0.4
2.0
2.5
0.6
3.0
0.8
3.5
4.0
1.0
4.5
1.2
5.0
5.5
1.4
6.0
1.6
6.5
1.8
7.0
Q [m/h]
2.0
3.0
Q [l/s]
-8
-7
-6
-5
-4
-3
-2
2.5
2.0
1.5
1.0
0.5
0.0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
p NPSH
[kPa] [m]
60
Q [m/h]
Eta
[%]
50
40
30
NPSH
40
20
10
0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
20
4.5
5.0
5.5
CME-A
CME-I/G
52
7.0
6.0
6.5
7.0
Q [m/h]
TM04 3571 0210
6.5
Eta
10
80
6.0
19
CME 10
50/60 Hz
CME 10
p
[kPa]
1200
H
[m]
CME 10
120
3480 rpm
-5
50/60 Hz
110
ISO 9906 Annex A

1000
100
-4
90
800
80
-3
70
600
60
50
400
-2
40
30
-1
200
20
10
0
0
P2
[kW]
0.0
0.5
1.0
6
1.5
2.0
10
2.5
11
12
3.0
13
3.5
14
15
4.0
16
4.5
Q [m/h]
Q [l/s]
-5
-4
-3
-2
-1
0
0
10
11
12
13
14
15
16
Q [m/h]
p NPSH
[kPa] [m]
12
80
40
60
Eta
40
20
NPSH
0
0
10
11
12
13
14
15
16
Q [m/h]
TM04 3572 0210
120
Eta
[%]
CME-A
CME-I/G
53
19
CME 15
50/60 Hz
CME 15
p
[kPa]
H
[m]
75
700
CME 15
-3
3480 rpm
70
50/60 Hz
65
600
ISO 9906 Annex A
60
55
500
-2
50
45
400
40
35
300
30
-1
25
200
20
15
100
10
5
0
0
P2
[kW]
10
12
3
14
16
18
20
22
24
Q [m/h]
7
Q [l/s]
-3
-2
-1
0
0
10
12
14
16
18
20
22
24
Q [m/h]
p NPSH
[kPa] [m]
120
12
80
Eta
[%]
Eta
60
40
40
20
0
0
10
12
14
16
18
20
CME-A
CME-I/G
54
22
24
Q [m/h]
TM04 3573 0210
NPSH
19
CME 25
50/60 Hz
CME 25
p
[kPa]
H
[m]
CME 25
65
600
3480 rpm
60
50/60 Hz
ISO 9906 Annex A
55
500
-2
50
45
400
40
35
300
30
-1
25
200
20
15
100
10
5
0
0
P2
[kW]
10
12
3
14
16
18
20
22
24
26
28
30
8
32
Q [m/h]
Q [l/s]
-2
4
-1
2
0
0
10
12
14
16
18
20
22
24
26
28
30
32
Q [m/h]
p NPSH
[kPa] [m]
160
Eta
[%]
Eta
15
60
120
10
40
40
NPSH
20
0
10
12
14
16
18
20
22
24
26
28
30
32
Q [m/h]
TM04 3574 0210
80
CME-A
CME-I/G
55
20
CM 1-A
50 Hz
Dimensions, CM 50 Hz
20. Dimensions, CM 50 Hz
CM 1-A
TM04 2248 2208
Dimensions
3 x 220-240/380-415 V, 50 Hz (supply voltage F)
Pump type
Frame P [kW]
2
size
A1 A2 A3 A4 B1
Dimensions
B2
B3
H1 H2
L1
L2
L3
L4 L5 L6 L7 L8
L9
CM1-2
71
0.46
1'' 1'' 3/8'' 10 142 158 125 184 75 149 288 114 89
86 96 137 28 174 202
CM1-3
71
0.46
1'' 1'' 3/8'' 10 142 158 125 184 75 149 306 132 107 104 96 137 28 174 202
CM1-4
71
0.46
1'' 1'' 3/8'' 10 142 158 125 184 75 149 324 150 125 122 96 137 28 174 202
CM1-5
71
0.46
1'' 1'' 3/8'' 10 142 158 125 184 75 149 342 168 143 140 96 137 28 174 202
CM1-6
71
0.46
1'' 1'' 3/8'' 10 142 158 125 184 75 149 360 186 161 158 96 137 28 174 202
CM1-7
71
0.65
1'' 1'' 3/8'' 10 142 158 125 184 75 149 378 204 179 176 96 137 28 174 202
CM1-8
71
0.65
1'' 1'' 3/8'' 10 142 158 125 184 75 149 396 222 197 194 96 137 28 174 202
All dimensions are in mm unless otherwise stated.
1 x 220-240 V, 50 Hz (supply voltage C)

Pump type
CM1-2
Frame P [kW]
2
size
A1 A2 A3 A4 B1
71
B3
H1 H2
L1
L2
L3
0.3
1'' 1'' 3/8'' 10 142 158 125 208 75 149 288 114 89
L4 L5 L6 L7 L8
L9
86 96 137 28 174 202
CM1-3
71
0.3
1'' 1'' 3/8'' 10 142 158 125 208 75 149 306 132 107 104 96 137 28 174 202
CM1-4
71
0.5
1'' 1'' 3/8'' 10 142 158 125 208 75 149 324 150 125 122 96 137 28 174 202
CM1-5
71
0.5
1'' 1'' 3/8'' 10 142 158 125 208 75 149 342 168 143 140 96 137 28 174 202
CM1-6
71
0.5
1'' 1'' 3/8'' 10 142 158 125 208 75 149 360 186 161 158 96 137 28 174 202
CM1-7
71
0.5
1'' 1'' 3/8'' 10 142 158 125 208 75 149 378 204 179 176 96 137 28 174 202
CM1-8
80
0.67
1'' 1'' 3/8'' 10 142 158 125 208 75 149 436 222 197 194 96 137 28 214 242
56
Dimensions
B2
20
CM 1-I and CM-G

50 Hz
CM 1-I and CM 1-G
TM04 2246 2208
Dimensions
Pump type
Frame P [kW]
2
size
A1 A2 A3 A4 B1
Dimensions
B2
B3
H1 H2
L1
L2
L3
L4 L5 L6 L7 L8
L9
CM1-2
71
0.46
1'' 1'' 3/8'' 10 142 158 125 184 75 165 305 131 107 72 96 137 60 174 234
CM1-3
71
0.46
1'' 1'' 3/8'' 10 142 158 125 184 75 165 305 131 107 72 96 137 60 174 234
CM1-4
71
0.46
1'' 1'' 3/8'' 10 142 158 125 184 75 165 323 149 125 90 96 137 60 174 234
CM1-5
71
0.46
1'' 1'' 3/8'' 10 142 158 125 184 75 165 341 167 143 108 96 137 60 174 234
CM1-6
71
0.46
1'' 1'' 3/8'' 10 142 158 125 184 75 165 377 203 179 144 96 137 60 174 234
CM1-7
71
0.65
1'' 1'' 3/8'' 10 142 158 125 184 75 165 377 203 179 144 96 137 60 174 234
CM1-8
71
0.65
1'' 1'' 3/8'' 10 142 158 125 184 75 165 413 239 215 180 96 137 60 174 234
CM1-9
71
0.65
1'' 1'' 3/8'' 10 142 158 125 184 75 165 413 239 215 180 96 137 60 174 234
CM1-10
80
0.85
1'' 1'' 3/8'' 10 142 158 125 184 75 165 489 275 251 216 96 137 60 214 274
CM1-11
80
0.85
1'' 1'' 3/8'' 10 142 158 125 184 75 165 489 275 251 216 96 137 60 214 274
CM1-12
80
0.85
1'' 1'' 3/8'' 10 142 158 125 184 75 165 543 329 305 270 96 137 60 214 274
CM1-13
80
1.2
1'' 1'' 3/8'' 10 142 158 125 184 75 165 563 329 305 270 96 137 60 234 294
CM1-14
80
1.2
1'' 1'' 3/8'' 10 142 158 125 184 75 165 563 329 305 270 96 137 60 234 294

Pump type
Frame P [kW]
2
size
A1 A2 A3 A4 B1
Dimensions
B2
B3
H1 H2
L1
L2
L3
L4
L5
L6 L7 L8
L9
CM1-2
71
0.3
1'' 1'' 3/8'' 10 142 158 125 208 75 165 305 131 107 72
96 137 60 174 234
CM1-3
71
0.3
1'' 1'' 3/8'' 10 142 158 125 208 75 165 305 131 107 72
96 137 60 174 234
CM1-4
71
0.5
1'' 1'' 3/8'' 10 142 158 125 208 75 165 323 149 125 90
96 137 60 174 234
CM1-5
71
0.5
1'' 1'' 3/8'' 10 142 158 125 208 75 165 341 167 143 108 96 137 60 174 234
CM1-6
71
0.5
1'' 1'' 3/8'' 10 142 158 125 208 75 165 377 203 179 144 96 137 60 174 234
CM1-7
71
0.5
1'' 1'' 3/8'' 10 142 158 125 208 75 165 377 203 179 144 96 137 60 174 234
CM1-8
80
0.67
1'' 1'' 3/8'' 10 142 158 125 208 75 165 453 239 215 180 96 137 60 214 274
CM1-9
80
0.67
1'' 1'' 3/8'' 10 142 158 125 208 75 165 453 239 215 180 96 137 60 214 274
CM1-10
80
0.67
1'' 1'' 3/8'' 10 142 158 125 208 75 165 489 275 251 216 96 137 60 214 274
CM1-11
80
0.9
1'' 1'' 3/8'' 10 142 158 125 208 75 165 489 275 251 216 96 137 60 214 274
CM1-12
80
0.9
1'' 1'' 3/8'' 10 142 158 125 208 75 165 543 329 305 270 96 137 60 214 274
CM1-13
80
0.9
1'' 1'' 3/8'' 10 142 158 125 208 75 165 543 329 305 270 96 137 60 214 274
CM1-14
90
1.3
1'' 1'' 3/8'' 10 178 178 140 229 90 180 593 369 354 270 125 155 99 224 323
57
20
CM 3-A
50 Hz
CM 3-A
TM04 2248 2208
Dimensions
Pump type
Frame P [kW]
2
size
A1 A2 A3 A4 B1
Dimensions
B2
B3
H1 H2
L1
L2
L3
L4 L5 L6 L7 L8
L9
CM3-2
71
0.46
1'' 1'' 3/8'' 10 142 158 125 184 75 149 288 114 89
86 96 137 28 174 202
CM3-3
71
0.46
1'' 1'' 3/8'' 10 142 158 125 184 75 149 306 132 107 104 96 137 28 174 202
CM3-4
71
0.46
1'' 1'' 3/8'' 10 142 158 125 184 75 149 324 150 125 122 96 137 28 174 202
CM3-5
71
0.65
1'' 1'' 3/8'' 10 142 158 125 184 75 149 342 168 143 140 96 137 28 174 202
CM3-6
71
0.65
1'' 1'' 3/8'' 10 142 158 125 184 75 149 360 186 161 158 96 137 28 174 202
CM3-7
80
0.85
1'' 1'' 3/8'' 10 142 158 125 184 75 149 418 204 179 176 96 137 28 214 242
CM3-8
80
1.2
1'' 1'' 3/8'' 10 142 158 125 184 75 149 456 222 197 194 96 137 28 234 262

Pump type
CM3-2
Frame P [kW]
2
size
A1 A2 A3 A4 B1
71
B3
H1 H2
L1
L2
L3
0.3
1'' 1'' 3/8'' 10 142 158 125 208 75 149 288 114 89
L4 L5 L6 L7 L8
L9
86 96 137 28 174 202
CM3-3
71
0.5
1'' 1'' 3/8'' 10 142 158 125 208 75 149 306 132 107 104 96 137 28 174 202
CM3-4
71
0.5
1'' 1'' 3/8'' 10 142 158 125 208 75 149 324 150 125 122 96 137 28 174 202
CM3-5
71
0.5
1'' 1'' 3/8'' 10 142 158 125 208 75 149 342 168 143 140 96 137 28 174 202
CM3-6
80
0.67
1'' 1'' 3/8'' 10 142 158 125 208 75 149 400 186 161 158 96 137 28 214 242
CM3-7
80
0.9
1'' 1'' 3/8'' 10 142 158 125 208 75 149 418 204 179 176 96 137 28 214 242
CM3-8
80
0.9
1'' 1'' 3/8'' 10 142 158 125 208 75 149 436 222 197 194 96 137 28 214 242
58
Dimensions
B2
20
CM 3-I and CM3-G

50 Hz
CM 3-I and CM 3-G
TM04 2246 2208
Dimensions
Pump type
Frame P [kW]
2
size
A1 A2 A3 A4 B1
Dimensions
B2
B3
H1 H2
L1
L2
L3
L4
L5
L6 L7 L8
L9
CM3-2
71
0.46
1'' 1'' 3/8'' 10 142 158 125 184 75 165 305 131 107 72
96 137 60 174 234
CM3-3
71
0.46
1'' 1'' 3/8'' 10 142 158 125 184 75 165 305 131 107 72
96 137 60 174 234
CM3-4
71
0.46
1'' 1'' 3/8'' 10 142 158 125 184 75 165 323 149 125 90
96 137 60 174 234
CM3-5
71
0.65
1'' 1'' 3/8'' 10 142 158 125 184 75 165 341 167 143 108 96 137 60 174 234
CM3-6
71
0.65
1'' 1'' 3/8'' 10 142 158 125 184 75 165 377 203 179 144 96 137 60 174 234
CM3-7
80
0.85
1'' 1'' 3/8'' 10 142 158 125 184 75 165 417 203 179 144 96 137 60 214 274
CM3-8
80
1.2
1'' 1'' 3/8'' 10 142 158 125 184 75 165 473 239 215 180 96 137 60 234 294
CM3-9
80
1.2
1'' 1'' 3/8'' 10 142 158 125 184 75 165 473 239 215 180 96 137 60 234 294
CM3-10
80
1.2
1'' 1'' 3/8'' 10 142 158 125 184 75 165 509 275 251 216 96 137 60 234 294
CM3-11
90
1.58
1'' 1'' 3/8'' 10 178 178 140 200 90 180 539 315 300 216 125 155 99 224 323
CM3-12
90
1.58
1'' 1'' 3/8'' 10 178 178 140 200 90 180 593 369 354 270 125 155 99 224 323
CM3-13
90
1.58
1'' 1'' 3/8'' 10 178 178 140 200 90 180 593 369 354 270 125 155 99 224 323
CM3-14
90
2.2
1'' 1'' 3/8'' 10 178 178 140 200 90 180 633 369 354 270 125 155 99 264 363

Pump type
Frame P [kW]
2
size
A1 A2 A3 A4 B1
Dimensions
B2
B3
H1 H2
L1
L2
L3
L4
L5
L6 L7 L8
L9
CM3-2
71
0.3
1'' 1'' 3/8'' 10 142 158 125 208 75 165 305 131 107 72
96 137 60 174 234
CM3-3
71
0.5
1'' 1'' 3/8'' 10 142 158 125 208 75 165 305 131 107 72
96 137 60 174 234
CM3-4
71
0.5
1'' 1'' 3/8'' 10 142 158 125 208 75 165 323 149 125 90
96 137 60 174 234
CM3-5
71
0.5
1'' 1'' 3/8'' 10 142 158 125 208 75 165 341 167 143 108 96 137 60 174 234
CM3-6
80
0.67
1'' 1'' 3/8'' 10 142 158 125 208 75 165 417 203 179 144 96 137 60 214 274
CM3-7
80
0.9
1'' 1'' 3/8'' 10 142 158 125 208 75 165 417 203 179 144 96 137 60 214 274
CM3-8
80
0.9
1'' 1'' 3/8'' 10 142 158 125 208 75 165 453 239 215 180 96 137 60 214 274
CM3-9
90
1.3
1'' 1'' 3/8'' 10 178 178 140 229 90 180 503 279 264 180 125 155 99 224 323
CM3-10
90
1.3
1'' 1'' 3/8'' 10 178 178 140 229 90 180 539 315 300 216 125 155 99 224 323
CM3-11
90
1.3
1'' 1'' 3/8'' 10 178 178 140 229 90 180 539 315 300 216 125 155 99 224 323
CM3-12
90
1.3
1'' 1'' 3/8'' 10 178 178 140 229 90 180 593 369 354 270 125 155 99 224 323
CM3-13
90
1.3
1'' 1'' 3/8'' 10 178 178 140 229 90 180 593 369 354 270 125 155 99 224 323
CM3-14
90
1.9
1'' 1'' 3/8'' 10 178 178 140 229 90 180 593 369 354 270 125 155 99 224 323
59
20
CM 5-A
50 Hz
CM 5-A
TM04 2248 2208
Dimensions
Pump type
Frame P [kW]
2
size
A1
Dimensions
A2
A3 A4 B1
B2
B3
L3
L4
L5
CM5-2
71
0.46
1'' 1 1/4'' 3/8'' 10 142 158 125 184 75 149 288 114 89
H1 H2
L1
L2
86
96 137 28 174 202
L6 L7 L8
L9
CM5-3
71
0.65
1'' 1 1/4'' 3/8'' 10 142 158 125 184 75 149 306 132 107 104 96 137 28 174 202
CM5-4
80
0.85
1'' 1 1/4'' 3/8'' 10 142 158 125 184 75 149 364 150 125 122 96 137 28 214 242
CM5-5
80
1.2
1'' 1 1/4'' 3/8'' 10 142 158 125 184 75 149 402 168 143 140 96 137 28 234 262
CM5-6
80
1.2
1'' 1 1/4'' 3/8'' 10 142 158 125 184 75 149 420 186 161 158 96 137 28 234 262
CM5-7
90
1.58
1'' 1 1/4'' 3/8'' 10 178 178 140 200 90 201 468 244 229 162 125 155 82 224 306
CM5-8
90
1.58
1'' 1 1/4'' 3/8'' 10 178 178 140 200 90 201 486 262 247 180 125 155 82 224 306

Pump type
Frame P [kW]
2
size
A1
0.5
Dimensions
A2
A3 A4 B1
B3
L3
L4
L5
1'' 1 1/4'' 3/8'' 10 142 158 125 208 75 149 288 114 89
H1 H2
L1
L2
86
96 137 28 174 202
L6 L7 L8
L9
CM5-2
71
CM5-3
71
0.5
1'' 1 1/4'' 3/8'' 10 142 158 125 208 75 149 306 132 107 104 96 137 28 174 202
CM5-4
80
0.67
1'' 1 1/4'' 3/8'' 10 142 158 125 208 75 149 364 150 125 122 96 137 28 214 242
CM5-5
80
0.9
1'' 1 1/4'' 3/8'' 10 142 158 125 208 75 149 382 168 143 140 96 137 28 214 242
CM5-6
90
1.3
1'' 1 1/4'' 3/8'' 10 178 178 140 229 90 201 450 226 211 144 125 155 82 224 306
CM5-7
90
1.3
1'' 1 1/4'' 3/8'' 10 178 178 140 229 90 201 468 244 229 162 125 155 82 224 306
CM5-8
90
1.3
1'' 1 1/4'' 3/8'' 10 178 178 140 229 90 201 486 262 247 180 125 155 82 224 306
60
B2
20
CM 5-I and CM 5-G

50 Hz
CM 5-I and CM 5-G
TM04 2246 2208
Dimensions
Pump type
Frame P [kW]
2
size
A1
Dimensions
A2
A3 A4 B1
B2
B3
H1
H2
L1
L2
L3
L4
L5
L6
L7
L8
L9
CM5-2
71
0.46
1'' 1 1/4'' 3/8'' 10 142 158 125 184 75 165 305 131 107 72
96 137 60 174 234
CM5-3
71
0.65
1'' 1 1/4'' 3/8'' 10 142 158 125 184 75 165 305 131 107 72
96 137 60 174 234
CM5-4
80
0.85
1'' 1 1/4'' 3/8'' 10 142 158 125 184 75 165 363 149 125 90
96 137 60 214 274
CM5-5
80
1.2
1'' 1 1/4'' 3/8'' 10 142 158 125 184 75 165 401 167 143 108 96 137 60 234 294
CM5-6
80
1.2
1'' 1 1/4'' 3/8'' 10 142 158 125 184 75 165 437 203 179 144 96 137 60 234 294
CM5-7
90
1.58
1'' 1 1/4'' 3/8'' 10 178 178 140 200 90 180 467 243 228 144 125 155 99 224 323
CM5-8
90
1.58
1'' 1 1/4'' 3/8'' 10 178 178 140 200 90 180 503 279 264 180 125 155 99 224 323
CM5-9
90
2.2
1'' 1 1/4'' 3/8'' 10 178 178 140 200 90 180 543 279 264 180 125 155 99 264 363
CM5-10
90
2.2
1'' 1 1/4'' 3/8'' 10 178 178 140 200 90 180 579 315 300 216 125 155 99 264 363
CM5-11
90
2.2
1'' 1 1/4'' 3/8'' 10 178 178 140 200 90 180 579 315 300 216 125 155 99 264 363
CM5-12
100
3.2
1'' 1 1/4'' 3/8'' 12 198 199 160 220 100 190 651 379 364 270 140 170 109 272 381
CM5-13
100
3.2
1'' 1 1/4'' 3/8'' 12 198 199 160 220 100 190 651 379 364 270 140 170 109 272 381

Pump type
Frame P [kW]
2
size
A1
0.5
Dimensions
A2
A3 A4 B1
B2
B3
H1 H2
L1
L2
L3
L4
L5
L6 L7 L8
L9
CM5-2
71
1'' 1 1/4'' 3/8'' 10 142 158 125 208 75 165 305 131 107 72
96 137 60 174 234
CM5-3
71
CM5-4
80
0.5
1'' 1 1/4'' 3/8'' 10 142 158 125 208 75 165 305 131 107 72
96 137 60 174 234
0.67
1'' 1 1/4'' 3/8'' 10 142 158 125 208 75 165 363 149 125 90
CM5-5
80
0.9
1'' 1 1/4'' 3/8'' 10 142 158 125 208 75 165 381 167 143 108 96 137 60 214 274
96 137 60 214 274
CM5-6
90
1.3
1'' 1 1/4'' 3/8'' 10 178 178 140 229 90 180 467 243 228 144 125 155 99 224 323
CM5-7
90
1.3
1'' 1 1/4'' 3/8'' 10 178 178 140 229 90 180 467 243 228 144 125 155 99 224 323
CM5-8
90
1.3
1'' 1 1/4'' 3/8'' 10 178 178 140 229 90 180 503 279 264 180 125 155 99 224 323
CM5-9
90
1.9
1'' 1 1/4'' 3/8'' 10 178 178 140 229 90 180 503 279 264 180 125 155 99 224 323
CM5-10
90
1.9
1'' 1 1/4'' 3/8'' 10 178 178 140 229 90 180 539 315 300 216 125 155 99 224 323
CM5-11
90
1.9
1'' 1 1/4'' 3/8'' 10 178 178 140 229 90 180 539 315 300 216 125 155 99 224 323
61
20
CM 10-A
50 Hz
CM 10-A
TM04 6111 4909
Dimensions
Pump type
Frame P [kW]
2
size
Dimensions
A1
A2
A3
A4
B1
B2
B3
H1
H2
L1
L2
L3
L4
L5
L6
L7
L8
L9
CM10-1
71
0.65
1 1/2'' 1 1/2'' 3/8'' 10.2 190 158 125 209 100 245 329 155 131 97
96 137 58 174 232
CM10-2
80
1.2
1 1/2'' 1 1/2'' 3/8'' 10.2 190 158 125 209 100 245 389 155 131 97
96 137 58 234 292
CM10-3
90
2.2
1 1/2'' 1 1/2'' 3/8'' 10.2 190 199 160 210 100 245 491 220 205 127 140 170 93 272 364
CM10-4
100
3.2
1 1/2'' 1 1/2'' 3/8'' 12.0 198 199 160 220 100 245 537 265 250 157 140 170 108 272 380
CM10-5
100
3.2
1 1/2'' 1 1/2'' 3/8'' 12.0 198 199 160 220 100 245 567 295 280 187 140 170 108 272 380

Pump type
Frame P [kW]
2
size
Dimensions
A1
A2
A3
B1
B2
B3
H1
H2
L1
L2
L3
L4
L5
L6 L7 L8
L9
CM10-1
80
0.67
1 1/2'' 1 1/2'' 3/8'' 10.2 190 158 125 233 100 245 369 155 131 97
CM10-2
90
1.3
1 1/2'' 1 1/2'' 3/8'' 10.2 190 199 160 239 100 245 421 190 175 97 140 170 93 232 324
CM10-3
90
1.9
1 1/2'' 1 1/2'' 3/8'' 10.2 190 199 160 239 100 245 451 220 205 127 140 170 93 232 324
62
A4
96 137 58 214 272
20
CM 10-I and CM 10-G

50 Hz
CM 10-I and CM 10-G
TM04 2246 2208
Dimensions
Pump type
Frame P [kW]
2
size
Dimensions
A1
A2
A3
A4
B1
B2
B3
H1
H2
L1
L2
L3
L4
L5
L6
L7
L8
L9
CM10-1
71
0.65
1 1/2'' 1 1/2'' 3/8'' 10.2 180 158 125 209 100 218 359 185 161 105 96 137 80 174 254
CM10-2
80
1.2
1 1/2'' 1 1/2'' 3/8'' 10.2 180 158 125 209 100 218 419 185 161 105 96 137 80 234 314
CM10-3
90
2.2
1 1/2'' 1 1/2'' 3/8'' 10.2 180 199 160 210 100 218 490 219 204 105 140 170 114 272 385
CM10-4
100
3.2
1 1/2'' 1 1/2'' 3/8'' 12.0 198 199 160 220 100 218 537 265 250 135 140 170 130 272 402
CM10-5
100
3.2
1 1/2'' 1 1/2'' 3/8'' 12.0 198 199 160 220 100 218 597 325 310 195 140 170 130 272 402
CM10-6
100
4.0
1 1/2'' 1 1/2'' 3/8'' 12.0 198 199 160 220 100 218 597 325 310 195 140 170 130 272 402
CM10-7
132
5.8
1 1/2'' 1 1/2'' 3/8'' 12.0 220 228 190 246 112 230 709 407 391 255 140 172 152 302 454
CM10-8
132
5.8
1 1/2'' 1 1/2'' 3/8'' 12.0 220 228 190 246 112 230 709 407 391 255 140 172 152 302 454

Please note that the dimension H is smaller than H2 for CM 10-1, CM 10-2 and CM 10-3.

Pump type
Frame P [kW]
2
size
Dimensions
A1
A2
A3
A4
B1
B2
B3
H1
H2
L1
L2
L3
L4
L5
L6
L7
L8
L9
CM10-1
80
0.67
1 1/2'' 1 1/2'' 3/8'' 10.2 180 158 125 233 100 218 399 185 161 105 96 137 80 214 294
CM10-2
90
1.3
1 1/2'' 1 1/2'' 3/8'' 10.2 180 199 160 239 100 218 450 219 204 105 140 170 114 232 345
CM10-3
90
1.9
1 1/2'' 1 1/2'' 3/8'' 10.2 180 199 160 239 100 218 450 219 204 105 140 170 114 232 345
63
20
CM 15-A
50 Hz
CM 15-A
TM04 6111 4909
Dimensions
Pump type
CM15-1
Frame P [kW]
2
size
A1 A2 A3
80
1.2
Dimensions
A4
B1
B2
B3
H1
H2
L1
L2
L3
L4
2'' 2'' 3/8'' 10.2 190 158 125 209 100 245 389 155 131 97
L5
L6
L7
L8
L9
96 137 58 234 292
CM15-2
90
2.2
2'' 2'' 3/8'' 10.2 190 199 160 210 100 245 461 190 175 97 140 170 93 272 364
CM15-3
100
4.0
2'' 2'' 3/8'' 12.0 198 199 160 220 100 245 507 235 220 127 140 170 108 272 380
CM15-4
132
5.8
2'' 2'' 3/8'' 12.0 220 228 190 246 112 257 590 288 272 157 140 172 131 302 433

Pump type
Frame P [kW]
2
size
A1 A2 A3
Dimensions
A4
B2
B3
H1
H2
L1
L2
L3 L4 L5
L6 L7 L8
L9
CM15-1
90
1.3
2'' 2'' 3/8'' 10.2 190 199 160 239 100 245 421 190 175 97 140 170 93 232 324
CM15-2
90
1.9
2'' 2'' 3/8'' 10.2 190 199 160 239 100 245 421 190 175 97 140 170 93 232 324
64
B1
20
CM 15-I and CM 15-G

50 Hz
CM 15-I and CM 15-G
TM04 2246 2208
Dimensions
Pump type
CM15-1
Frame P [kW]
2
size
A1 A2 A3
80
1.2
Dimensions
A4
B1
B2
B3
H1
H2
L1
L2
L3
L4
L5
L6
L7
L8
L9
2'' 2'' 3/8'' 10.2 180 158 125 209 100 218 419 185 161 105 96 137 80 234 314
CM15-2
90
2.2
2'' 2'' 3/8'' 10.2 180 199 160 210 100 218 490 219 204 105 140 170 114 272 385
CM15-3
100
4.0
2'' 2'' 3/8'' 12.0 198 199 160 220 100 218 507 235 220 105 140 170 130 272 402
CM15-4
132
5.8
2'' 2'' 3/8'' 12.0 220 228 190 246 112 230 589 287 271 135 140 172 152 302 454

Please note that the dimension H is smaller than H2 for CM 15-1 and CM 15-2.

Pump type
Frame P [kW]
2
size
A1 A2 A3
Dimensions
A4
B1
B2
B3
H1
H2
L1
L2
L3
L4
L5
L6
L7
L8
L9
CM15-1
90
1.3
2'' 2'' 3/8'' 10.2 180 199 160 239 100 218 450 219 204 105 140 170 114 232 345
CM15-2
90
1.9
2'' 2'' 3/8'' 10.2 180 199 160 239 100 218 450 219 204 105 140 170 114 232 345
65
20
CM 25-A
50 Hz
CM 25-A
TM04 6111 4909
Dimensions
Pump type
Frame P [kW]
2
size
A1 A2 A3
Dimensions
A4
B1
B2
B3
H1
H2
L1
L2
L3
L4
L5
L6
L7
L8
L9
CM25-1
90
2.2
2'' 2'' 3/8'' 10.2 190 199 160 210 100 245 461 190 175 97 140 170 93 272 364
CM25-2
100
4.0
2'' 2'' 3/8'' 12.0 198 199 160 220 100 245 477 205 190 97 140 170 108 272 380
CM25-3
132
5.8
2'' 2'' 3/8'' 12.0 220 228 190 246 112 257 560 258 242 127 140 172 131 302 433
CM25-4
132
7.4
2'' 2'' 3/8'' 12.0 220 228 190 246 112 257 590 288 272 157 140 172 131 302 433

Pump type
CM25-1
Frame P [kW]
2
size
A1 A2 A3
90
1.9
Dimensions
A4
B2
B3
H1
H2
L1
L2
L3 L4 L5
L6 L7 L8
L9
2'' 2'' 3/8'' 10.2 190 199 160 239 100 245 421 190 175 97 140 170 93 232 324
66
B1
20
CM 25-I and CM 25-G

50 Hz
CM 25-I and CM 25-G
TM04 2246 2208
Dimensions
Pump type
Frame P [kW]
2
size
A1 A2 A3
Dimensions
A4
B1
B2
B3
H1
H2
L1
L2
L3
L4
L5
L6
L7
L8
L9
CM25-1
90
2.2
2'' 2'' 3/8'' 10.2 180 199 160 210 100 218 490 219 204 105 140 170 114 272 385
CM25-2
100
4.0
2'' 2'' 3/8'' 12.0 198 199 160 220 100 218 507 235 220 105 140 170 130 272 402
CM25-3
132
5.8
2'' 2'' 3/8'' 12.0 220 228 190 246 112 230 559 257 241 105 140 172 152 302 454
CM25-4
132
7.4
2'' 2'' 3/8'' 12.0 220 228 190 246 112 230 589 287 271 135 140 172 152 302 454

Please note that the dimension H is smaller than H2 for CM 25-1.

Pump type
CM25-1
Frame P [kW]
2
size
A1 A2 A3
90
1.9
Dimensions
A4
B1
B2
B3
H1
H2
L1
L2
L3
L4
L5
L6
L7
L8
L9
2'' 2'' 3/8'' 10.2 180 199 160 239 100 218 450 219 204 105 140 170 114 232 345
67
21
CM 1-A
60 Hz
50/60 Hz
Dimensions, CM 60 Hz and 50/60 Hz
21. Dimensions, CM 60 Hz and 50/60 Hz

CM 1-A
TM04 2248 2208
Dimensions
3
3
3
3
3
x
x
x
x
x
208-230/440-480 V, 60 Hz (supply voltage E)

575 V, 60 Hz (supply voltage H)
400 V, 50/60 Hz (supply voltage I)
380-415 V, 50 Hz; 3 x 440-480 V, 60 Hz (supply voltage J)
220-240/380-415 V, 50 Hz; 3 x 220-255/380-440 V, 60 Hz (supply voltage O)
Pump type
Frame
size
P2 [kW]
50 Hz
Dimensions
60 Hz
A1 A2 A3 A4 B1
B2
B3
H1 H2
L1
L2
L3
0.25**/0.43 0.43/0.74* 1'' 1'' 3/8'' 10 142 158 125 191 75 149 288 114 89
L4 L5 L6 L7 L8
L9
CM1-2
71
CM1-3
71
0.25**/0.43 0.43/0.74* 1'' 1'' 3/8'' 10 142 158 125 191 75 149 306 132 107 104 96 137 28 174 202
CM1-4
71
0.43/0.74***
0.74
86 96 137 28 174 202
1'' 1'' 3/8'' 10 142 158 125 191 75 149 324 150 125 122 96 137 28 174 202
CM1-5
71
0.43/0.74***
0.74
1'' 1'' 3/8'' 10 142 158 125 191 75 149 342 168 143 140 96 137 28 174 202
* Applies to supply voltage O.
** Applies to supply voltage J.
*** Applies to supply voltage I.

1 x 220 V, 60 Hz (supply voltage A)
Pump type
Frame P [kW]
2
size
A1 A2 A3 A4 B1
Dimensions
B2
B3
H1 H2
L1
L2
L3
L4 L5 L6 L7 L8
L9
CM1-2
71
0.60
1'' 1'' 3/8'' 10 142 158 125 208 75 149 288 114 89
86 96 137 28 174 202
CM1-3
71
0.60
1'' 1'' 3/8'' 10 142 158 125 208 75 149 306 132 107 104 96 137 28 174 202
CM1-4
71
0.60
1'' 1'' 3/8'' 10 142 158 125 208 75 149 324 150 125 122 96 137 28 174 202
CM1-5
71
0.60
1'' 1'' 3/8'' 10 142 158 125 208 75 149 342 168 143 140 96 137 28 174 202
3 x 200/346 V, 50 Hz; 3 x 200-220/346-380 V, 60 Hz (supply voltage G)

Pump type
P2 [kW]
Frame
size 50 Hz 60 Hz A1 A2 A3 A4 B1
B3
H1 H2
L1
L2
L3
L4 L5 L6 L7 L8
L9
CM1-2
71
0.25
0.43
1'' 1'' 3/8'' 10 142 158 125 184 75 149 288 114 89
CM1-3
71
0.25
0.43
1'' 1'' 3/8'' 10 142 158 125 184 75 149 306 132 107 104 96 137 28 174 202
CM1-4
71
0.43
0.74
1'' 1'' 3/8'' 10 142 158 125 184 75 149 324 150 125 122 96 137 28 174 202
CM1-5
71
0.43
0.74
1'' 1'' 3/8'' 10 142 158 125 184 75 149 342 168 143 140 96 137 28 174 202
68
Dimensions
B2
86 96 137 28 174 202
21
CM 1-I and CM 1-G

60 Hz
50/60 Hz
CM 1-I and CM 1-G
TM04 2246 2208
Dimensions
3
3
3
3
3
x
x
x
x
x

Pump type
Frame
size
P2 [kW]
50 Hz
Dimensions
60 Hz
A1 A2 A3 A4 B1
B2
B3
H1 H2
L1
L2
L3
L4 L5 L6 L7 L8
L9
CM1-2
71
0.25**/0.43 0.43/0.74* 1'' 1'' 3/8'' 10 142 158 125 191 75 165 305 131 107 72 96 137 60 174 234
CM1-3
71
0.25**/0.43 0.43/0.74* 1'' 1'' 3/8'' 10 142 158 125 191 75 165 305 131 107 72 96 137 60 174 234
CM1-4
71
0.43/0.74***
0.74
1'' 1'' 3/8'' 10 142 158 125 191 75 165 323 149 125 90 96 137 60 174 234
CM1-5
71
0.43/0.74***
0.74
1'' 1'' 3/8'' 10 142 158 125 191 75 165 341 167 143 108 96 137 60 174 234
CM1-6
71
0.43/0.74***
0.74
1'' 1'' 3/8'' 10 142 158 125 191 75 165 377 203 179 144 96 137 60 174 234
CM1-7
71
0.43/0.74***
0.74
1'' 1'' 3/8'' 10 142 158 125 191 75 165 377 203 179 144 96 137 60 174 234
CM1-8
80
0.6/1.04***
1.04
1'' 1'' 3/8'' 10 142 158 125 191 75 165 453 239 215 180 96 137 60 214 274
CM1-9
80
0.74/1.28***
1.28
1'' 1'' 3/8'' 10 142 158 125 191 75 165 473 239 215 180 96 137 60 234 294

1 x 115/230 V, 60 Hz (supply voltage B); 1 x 220 V, 60 Hz (supply voltage A)

Dimensions
Frame
size
P2 [kW]
CM1-2
71
0.60
1'' 1'' 3/8'' 10 142 158 125 208 75 165 305 131 107 72 96 137 60 174 234
CM1-3
71
0.60
1'' 1'' 3/8'' 10 142 158 125 208 75 165 305 131 107 72 96 137 60 174 234
CM1-4
71
0.60
1'' 1'' 3/8'' 10 142 158 125 208 75 165 323 149 125 90 96 137 60 174 234
CM1-5
71
0.60
1'' 1'' 3/8'' 10 142 158 125 208 75 165 341 167 143 108 96 137 60 174 234
CM1-6
80
0.84*/0.78 1'' 1'' 3/8'' 10 142 158 125 208 75 165 417 203 179 144 96 137 60 214 274
CM1-7
80
1.14*/1.10 1'' 1'' 3/8'' 10 205 158 125 208 75 165 417 203 179 144 96 137 60 214 274
CM1-8
80
1.14*/1.10 1'' 1'' 3/8'' 10 205 158 125 208 75 165 453 239 215 180 96 137 60 214 274
CM1-9
80
1.14*/1.10 1'' 1'' 3/8'' 10 205 158 125 208 75 165 453 239 215 180 96 137 60 214 274
Pump type
A1 A2 A3 A4 B1
B2
B3
H1 H2
L1
L2
L3
L4 L5 L6 L7 L8
L9

* Applies to supply voltage A.

Pump type
P2 [kW]
Frame
Dimensions
B2
B3
H1 H2
L1
L2
L3
L4 L5 L6 L7 L8
L9
CM1-2
71
0.25
0.43
1'' 1'' 3/8'' 10 142 158 125 184 75 165 305 131 107 72 96 137 60 174 234
CM1-3
71
0.25
0.43
1'' 1'' 3/8'' 10 142 158 125 184 75 165 305 131 107 72 96 137 60 174 234
CM1-4
71
0.43
0.74
1'' 1'' 3/8'' 10 142 158 125 184 75 165 323 149 125 90 96 137 60 174 234
CM1-5
71
0.43
0.74
1'' 1'' 3/8'' 10 142 158 125 184 75 165 341 167 143 108 96 137 60 174 234
CM1-6
71
0.43
0.74
1'' 1'' 3/8'' 10 142 158 125 184 75 165 377 203 179 144 96 137 60 174 234
CM1-7
71
0.43
0.74
1'' 1'' 3/8'' 10 142 158 125 184 75 165 377 203 179 144 96 137 60 174 234
CM1-8
80
0.6
1.04
1'' 1'' 3/8'' 10 142 158 125 184 75 165 453 239 215 180 96 137 60 214 274
CM1-9
80
0.74
1.28
1'' 1'' 3/8'' 10 142 158 125 184 75 165 473 239 215 180 96 137 60 234 294
69
21
CM 3-A
60 Hz
50/60 Hz
CM 3-A
TM04 2248 2208
Dimensions
3
3
3
3
3
x
x
x
x
x

Pump type
CM3-2
Frame
size
71
P2 [kW]
50 Hz
Dimensions
60 Hz
A1 A2 A3 A4 B1
B2
B3
H1 H2
L1
L2
L3
0.25**/0.43 0.43/0.74* 1'' 1'' 3/8'' 10 142 158 125 191 75 149 288 114 89
L4 L5 L6 L7 L8
CM3-3
71
0.43/0.74***
0.74
1'' 1'' 3/8'' 10 142 158 125 191 75 149 306 132 107 104 96 137 28 174 202
CM3-4
71
0.43/0.74***
0.74
1'' 1'' 3/8'' 10 142 158 125 191 75 149 324 150 125 122 96 137 28 174 202
CM3-5
80
0.60/1.04***
1.04
1'' 1'' 3/8'' 10 142 158 125 191 75 149 382 168 143 140 96 137 28 214 242


Dimensions
Frame
size
P2 [kW]
CM3-2
71
0.60
1'' 1'' 3/8'' 10 142 158 125 208 75 149 288 114 89
CM3-3
71
0.60
1'' 1'' 3/8'' 10 142 158 125 208 75 149 306 132 107 104 96 137 28 174 202
CM3-4
80
0.84*/0.78 1'' 1'' 3/8'' 10 142 158 125 208 75 149 364 150 125 122 96 137 28 214 242
CM3-5
80
1.14*/1.10 1'' 1'' 3/8'' 10 205 158 125 208 75 149 382 168 143 140 96 137 28 214 242
Pump type
A1 A2 A3 A4 B1
B2
B3
H1 H2
L1
L2
L3
L4 L5 L6 L7 L8
L9
86 96 137 28 174 202


Pump type
P2 [kW]
Frame
Dimensions
B2
B3
H1 H2
L1
L2
L3
L4 L5 L6 L7 L8
L9
CM3-2
71
0.25
0.43
1'' 1'' 3/8'' 10 142 158 125 184 75 149 288 114 89
CM3-3
71
0.43
0.74
1'' 1'' 3/8'' 10 142 158 125 184 75 149 306 132 107 104 96 137 28 174 202
CM3-4
71
0.43
0.74
1'' 1'' 3/8'' 10 142 158 125 184 75 149 324 150 125 122 96 137 28 174 202
CM3-5
80
0.6
1.04
1'' 1'' 3/8'' 10 142 158 125 184 75 149 382 168 143 140 96 137 28 214 242
70
L9
86 96 137 28 174 202
86 96 137 28 174 202
21
CM 3-I and CM 3-G

60 Hz
50/60 Hz
CM 3-I and CM 3-G
TM04 2246 2208
Dimensions
3 x 208-230/440-480 V, 60 Hz (supply voltage E); 3 x 575 V, 60 Hz (supply voltage H)
3 x 400 V, 50/60 Hz (supply voltage I); 3 x 380-415 V, 50 Hz; 3 x 440-480 V, 60 Hz (supply voltage J)
3 x 220-240/380-415 V, 50 Hz; 3 x 220-255/380-440 V, 60 Hz (supply voltage O)
P2 [kW]
Dimensions
Frame
size
50 Hz
CM3-2
71
0.25**/0.43
CM3-3
71
0.43/0.74***
0.74
1'' 1'' 3/8'' 10 142 158 125 191 75 165 305 131 107 72
96 137 60 174 234
CM3-4
71
0.43/0.74***
0.74
1'' 1'' 3/8'' 10 142 158 125 191 75 165 323 149 125 90
96 137 60 174 234
CM3-5
80
Pump type
60 Hz
A1 A2 A3 A4 B1
B2
B3
H1 H2
L1
L2
L3
L4
L5
0.43/0.74* 1'' 1'' 3/8'' 10 142 158 125 191 75 165 305 131 107 72
L6 L7 L8
L9
96 137 60 174 234
0.6*/1.04***/1.45** 1.04/2.5** 1'' 1'' 3/8'' 10 142 158 125 191 75 165 381 167 143 108 96 137 60 214 274
CM3-6
80
0.74/1.28***
1.28
1'' 1'' 3/8'' 10 142 158 125 191 75 165 437 203 179 144 96 137 60 234 294
CM3-7
90
1.0/1.7***
1.7
1'' 1'' 3/8'' 10 178 178 140 200 90 180 467 243 228 144 125 155 99 224 323
CM3-8
90
1.45/2.5***
2.5
1'' 1'' 3/8'' 10 178 178 140 200 90 180 543 279 264 180 125 155 99 264 363
CM3-9
90
1.45/2.5***
2.5
1'' 1'' 3/8'' 10 178 178 140 200 90 180 543 279 264 180 125 155 99 264 363

CM 3-7, CM 3-8 and CM 3-9 are not available with supply voltage O.
1 x 115/230 V, 60 Hz (supply voltage B); 1 x 220 V, 60 Hz (supply voltage A)

Dimensions
Frame
size
P2 [kW]
CM3-2
71
0.60
1'' 1'' 3/8'' 10 142 158 125 208 75 165 305 131 107 72
CM3-3
71
0.60
1'' 1'' 3/8'' 10 142 158 125 208 75 165 305 131 107 72
96 137 60 174 234
CM3-4
80
0.84*/0.78 1'' 1'' 3/8'' 10 142 158 125 208 75 165 363 149 125 90
96 137 60 214 274
CM3-5
80
1.14*/1.10 1'' 1'' 3/8'' 10 205 158 125 208 75 165 381 167 143 108 96 137 60 214 274
CM3-6
90
1.54*/1.50 1'' 1'' 3/8'' 10 178 178 140 229 90 180 467 243 228 144 125 155 99 224 323
CM3-7
90
1.54*/1.50 1'' 1'' 3/8'' 10 178 178 140 229 90 180 467 243 228 144 125 155 99 224 323
CM3-8
90
1.54*/1.50 1'' 1'' 3/8'' 10 178 178 140 229 90 180 503 279 264 180 125 155 99 224 323
Pump type
A1 A2 A3 A4 B1
B2
B3
H1 H2
L1
L2
L3
L4
L5
L6 L7 L8
L9
96 137 60 174 234


Pump type
P2 [kW]
Frame
Dimensions
B2
B3
H1 H2
L1
L2
L3
L4
L5
L6 L7 L8
L9
CM3-2
71
0.25
0.43
1'' 1'' 3/8'' 10 142 158 125 184 75 165 305 131 107 72
96 137 60 174 234
CM3-3
71
0.43
0.74
1'' 1'' 3/8'' 10 142 158 125 184 75 165 305 131 107 72
96 137 60 174 234
CM3-4
71
0.43
0.74
1'' 1'' 3/8'' 10 142 158 125 184 75 165 323 149 125 90
96 137 60 174 234
CM3-5
80
0.6
1.04
1'' 1'' 3/8'' 10 142 158 125 184 75 165 381 167 143 108 96 137 60 214 274
CM3-6
80
0.74
1.28
1'' 1'' 3/8'' 10 142 158 125 184 75 165 437 203 179 144 96 137 60 234 294
CM3-7
90
1.7
1'' 1'' 3/8'' 10 178 178 140 200 90 180 467 243 228 144 125 155 99 224 323
CM3-8
90
1.4
2.5
1'' 1'' 3/8'' 10 178 178 140 200 90 180 543 279 264 180 125 155 99 264 363
CM3-9
90
1.4
2.5
1'' 1'' 3/8'' 10 178 178 140 200 90 180 543 279 264 180 125 155 99 264 363
71
21
CM 5-A
60 Hz
50/60 Hz
CM 5-A
TM04 2248 2208
Dimensions
3
3
3
3
3
x
x
x
x
x

P2 [kW]
Dimensions
Frame
size
50 Hz
L3
L4
L5
CM5-2
71
0.43/0.74*
0.74
1'' 1 1/4'' 3/8'' 10 142 158 125 191 75 149 288 114 89
86
96 137 28 174 202
CM5-3
80
0.60/1.04*
1.04
1'' 1 1/4'' 3/8'' 10 142 158 125 191 75 149 346 132 107 104 96 137 28 214 242
CM5-4
90
1.0**/1.7*
1.7
1'' 1 1/4'' 3/8'' 10 178 178 140 200 90 201 414 190 175 108 125 155 82 224 306
CM5-5
90
1.45**/2.5*
2.5
1'' 1 1/4'' 3/8'' 10 178 178 140 200 90 201 472 208 193 126 125 155 82 264 346
Pump type
60 Hz A1
A2
A3 A4 B1
B2
B3
H1 H2
L1
L2
L6 L7 L8

* Applies to supply voltage I.
CM 5-4 and CM 5-5 are not available with supply voltage O.

Pump type
Frame
size
P2 [kW]
Dimensions
L3
L4
L5
CM5-2
80
0.84*/0.78 1'' 1 1/4'' 3/8'' 10 142 158 125 208 75 149 328 114 89
86
96 137 28 214 242
CM5-3
80
1.14*/1.10 1'' 1 1/4'' 3/8'' 10 205 158 125 208 75 149 346 132 107 104 96 137 28 214 242
CM5-4
90
1.54*/1.50 1'' 1 1/4'' 3/8'' 10 178 178 140 229 90 201 414 190 175 108 125 155 82 224 306
CM5-5
90
1.50
A1
A2
A3 A4 B1
B2
B3
H1 H2
L1
L2
L6 L7 L8
L9
1'' 1 1/4'' 3/8'' 10 178 178 140 229 90 201 432 208 193 126 125 155 82 224 306

Note: CM 5-5 is not available with supply voltage A.

Pump type
P2 [kW]
Frame
size 50 Hz 60 Hz A1
Dimensions
A2
A3 A4 B1
B3
L3
L4
L5
1'' 1 1/4'' 3/8'' 10 142 158 125 184 75 149 288 114 89
H1 H2
L1
L2
86
96 137 28 174 202
L6 L7 L8
L9
CM5-2
71
0.43
0.74
CM5-3
80
0.6
1.04
1'' 1 1/4'' 3/8'' 10 142 158 125 184 75 149 346 132 107 104 96 137 28 214 242
CM5-4
90
1.7
1'' 1 1/4'' 3/8'' 10 178 178 140 200 90 201 414 190 175 108 125 155 82 224 306
CM5-5
90
1.4
2.5
1'' 1 1/4'' 3/8'' 10 178 178 140 200 90 201 472 208 193 126 125 155 82 264 346
72
B2
L9
21
CM 5-I and CM 5-G

60 Hz
50/60 Hz
CM 5-I and CM 5-G
TM04 2246 2208
Dimensions
3
3
3
3
3
x
x
x
x
x

Pump type
Frame
size
P2 [kW]
50 Hz
Dimensions
60 Hz A1
A2
A3 A4 B1
B2
B3
H1
H2
L1
L2
L3
L4
L5
L6
L7
L8
L9
CM5-2
71
0.43/0.74* 0.74
1'' 1 1/4'' 3/8'' 10 142 158 125 191 75 165 305 131 107 72
96 137 60 174 234
CM5-3
80
0.6/1.04*
1.04
1'' 1 1/4'' 3/8'' 10 142 158 125 191 75 165 345 131 107 72
96 137 60 214 274
CM5-4
90
1.0/1.7*
1.7
1'' 1 1/4'' 3/8'' 10 178 178 140 200 90 180 413 189 174 90 125 155 99 224 323
CM5-5
90
1.45/2.5*
2.5
1'' 1 1/4'' 3/8'' 10 178 178 140 200 90 180 471 207 192 108 125 155 99 264 363
CM5-6
90
1.45/2.5*
2.5
1'' 1 1/4'' 3/8'' 10 178 178 140 200 90 180 507 243 228 144 125 155 99 264 363
CM5-7
90
1.45/2.5*
2.5
1'' 1 1/4'' 3/8'' 10 178 178 140 200 90 180 507 243 228 144 125 155 99 264 363
CM5-8
100
2.36/4.0*
1'' 1 1/4'' 3/8'' 12 198 199 160 220 100 190 561 289 274 180 140 170 109 272 381

Note: CM 5-4, CM 5-5, CM 5-6, CM 5-7 and CM 5-8 are not available with supply voltage O.

Pump type
Frame
size
P2 [kW]
Dimensions
A1
A2
A3 A4 B1
B2
B3
H1 H2
L1
L2
L3
L4
L5
L6 L7 L8
L9
CM5-2
80
0.84*/0.78 1'' 1 1/4'' 3/8'' 10 142 158 125 208 75 165 345 131 107 72
96 137 60 214 274
CM5-3
80
1.14*/1.10 1'' 1 1/4'' 3/8'' 10 205 158 125 208 75 165 345 131 107 72
96 137 60 214 274
CM5-4
90
1.54*/1.50 1'' 1 1/4'' 3/8'' 10 178 178 140 229 90 180 413 189 174 90 125 155 99 224 323
CM5-5
90
1.50
1'' 1 1/4'' 3/8'' 10 178 178 140 229 90 180 431 207 192 108 125 155 99 224 323

*
Applies to supply voltage A.
Note: CM 5-5 is not available with supply voltage A.

Pump type
P2 [kW]
Frame
size 50 Hz 60 Hz A1
CM5-2
71
0.43
0.74
CM5-3
80
0.6
CM5-4
90
CM5-5
90
CM5-6
90
CM5-7
CM5-8
Dimensions
A2
A3 A4 B1
B2
B3
H1
H2
L1
L2
L3
L4
L5
L6
L7
L8
L9
1'' 1 1/4'' 3/8'' 10 142 158 125 184 75 165 305 131 107 72
96 137 60 174 234
1.04
1'' 1 1/4'' 3/8'' 10 142 158 125 184 75 165 345 131 107 72
96 137 60 214 274
1.7
1'' 1 1/4'' 3/8'' 10 178 178 140 200 90 180 413 189 174 90 125 155 99 224 323
1.4
2.5
1'' 1 1/4'' 3/8'' 10 178 178 140 200 90 180 471 207 192 108 125 155 99 264 363
1.4
2.5
1'' 1 1/4'' 3/8'' 10 178 178 140 200 90 180 507 243 228 144 125 155 99 264 363
90
1.4
2.5
1'' 1 1/4'' 3/8'' 10 178 178 140 200 90 180 507 243 228 144 125 155 99 264 363
100
2.3
4.0
1'' 1 1/4'' 3/8'' 12 198 199 160 220 100 190 561 289 274 180 140 170 109 272 381
73
21
CM 10-A
60 Hz
50/60 Hz
CM 10-A
TM04 6111 4909
Dimensions
3
3
3
3
3
x
x
x
x
x

Pump type
CM10-1
Frame
size
P2 [kW]
50 Hz
Dimensions
60 Hz
A1
A2
A3
A4
B1
B2
B3
H1
H2
L1
L2
L3
L4
L5
L6
L7
L8
0.74/1.28* 1.28
1 1/2'' 1 1/2'' 3/8'' 10.2 190 158 125 216 100 245 389 155 131 97
96 137 58 234 292
CM10-2
90
1.45/2.5*
2.5
1 1/2'' 1 1/2'' 3/8'' 10.2 190 199 160 210 100 245 461 190 175 97 140 170 93 272 364
CM10-3
100
2.36/4.0*
1 1/2'' 1 1/2'' 3/8'' 12.0 198 199 160 220 100 245 507 235 220 127 140 170 108 272 380


Pump type
CM10-1
Frame
size
80
P2 [kW]
Dimensions
A1
A2
A3
A4
B1
B2
B3
H1
H2
L1
L2
L3 L4 L5 L6 L7 L8
L9
1.14*/1.10 1 1/2'' 1 1/2'' 3/8'' 10.2 205 158 125 233 100 245 369 155 131 97 96 137 58 214 272


Pump type
CM10-1
P2 [kW]
Frame
size 50 Hz 60 Hz
Dimensions
A1
A2
A3
A4
B1
B2
B3
H1
H2
L1
L2
L3
L4
L5
L6
L7
L8
L9
80
0.74
1.28
1 1/2'' 1 1/2'' 3/8'' 10.2 190 158 125 209 100 245 389 155 131 97
CM10-2
90
1.4
2.5
1 1/2'' 1 1/2'' 3/8'' 10.2 190 199 160 210 100 245 461 190 175 97 140 170 93 272 364
CM10-3
100
2.3
4.0
1 1/2'' 1 1/2'' 3/8'' 12.0 198 199 160 220 100 245 507 235 220 127 140 170 108 272 380
74
L9
80
96 137 58 234 292
21
CM 10-I and CM 10-G

60 Hz
50/60 Hz
CM 10-I and CM 10-G
TM04 2246 2208
Dimensions
3
3
3
3
3
x
x
x
x
x

Pump type
CM10-1
Frame
size
P2 [kW]
50 Hz
Dimensions
60 Hz
A1
A2
A3
A4
B1
B2
B3
H1
H2
L1
L2
L3
L4
L5
L6
L7
L8
L9
80
0.74/1.28* 1.28
1 1/2'' 1 1/2'' 3/8'' 10.2 180 158 125 216 100 218 399 185 161 105 96 137 80 214 294
CM10-2
90
1.45/2.5*
2.5
1 1/2'' 1 1/2'' 3/8'' 10.2 180 199 160 210 100 218 490 219 204 105 140 170 114 272 385
CM10-3
100
2.36/4.0*
1 1/2'' 1 1/2'' 3/8'' 12.0 198 199 160 220 100 218 507 235 220 105 140 170 130 272 402
CM10-4
132
4.2/6.2*
6.2
1 1/2'' 1 1/2'' 3/8'' 12.0 220 228 190 246 112 230 589 287 271 135 140 172 152 302 454
CM10-5
132
4.2/6.2*
6.2
1 1/2'' 1 1/2'' 3/8'' 12.0 220 228 190 246 112 230 649 347 331 195 140 172 152 302 454

Note: The dimension H is smaller than H2 for CM 10-1 and CM 10-2.
Note: CM 10-2, CM 10-3, CM 10-4 and CM 10-5 are not available with supply voltage O.

Pump type
CM10-1
Frame
size
80
P2 [kW]
Dimensions
A1
A2
A3
A4
B1
B2
B3
H1
H2
L1
L2
L3
L4 L5 L6 L7 L8
L9
1.14*/1.10 1 1/2'' 1 1/2'' 3/8'' 10.2 205 158 125 233 100 218 399 185 161 105 96 137 80 214 294


Pump type
CM10-1
P2 [kW]
Frame
size 50 Hz 60 Hz
Dimensions
A1
A2
A3
A4
B1
B2
B3
H1
H2
L1
L2
L3
L4
L5
L6
L7
L8
L9
80
0.74
1.28
1 1/2'' 1 1/2'' 3/8'' 10.2 180 158 125 209 100 218 419 185 161 105 96 137 80 234 314
CM10-2
90
1.4
2.5
1 1/2'' 1 1/2'' 3/8'' 10.2 180 199 160 210 100 218 490 219 204 105 140 170 114 272 385
CM10-3
100
2.3
4.0
1 1/2'' 1 1/2'' 3/8'' 12.0 198 199 160 220 100 218 507 235 220 105 140 170 130 272 402
CM10-4
112
3.5
6.2
1 1/2'' 1 1/2'' 3/8'' 12.0 220 228 190 246 112 230 589 287 271 135 140 172 152 302 454
CM10-5
112
3.5
6.2
1 1/2'' 1 1/2'' 3/8'' 12.0 220 228 190 246 112 230 649 347 331 195 140 172 152 302 454

Note: The dimension H is smaller than H2 for CM 10-1 and CM 10-2.
75
21
CM 15-A
60 Hz
50/60 Hz
CM 15-A
TM04 6111 4909
Dimensions
3
3
3
3
x
x
x
x

P2 [kW]
Dimensions
Frame
size
50 Hz
CM15-1
90
1.45/2.5*
CM15-2
100
2.36/4.0*
2'' 2'' 3/8'' 12.0 198 199 160 220 100 245 477 205 190 97 140 170 108 272 380
CM15-3
132
4.2/6.2*
6.2
2'' 2'' 3/8'' 12.0 220 228 190 246 112 257 560 258 242 127 140 172 131 302 433
Pump type
60 Hz A1 A2 A3
2.5
A4
B1
B2
B3
H1
H2
L1
L2
L3
L4
L5
L6
L7
L8
L9
2'' 2'' 3/8'' 10.2 190 199 160 210 100 245 461 190 175 97 140 170 93 272 364

Note: CM 15-2 and CM 15-3 are not available with supply voltage O.

Pump type
P2 [kW]
Frame
size 50 Hz 60 Hz A1 A2 A3
B1
B2
B3
H1
H2
L1
L2
L3
L4
L5
L6
L7
L8
L9
CM15-1
90
1.4
2.5
2'' 2'' 3/8'' 10.2 190 199 160 210 100 245 461 190 175 97 140 170 93 272 364
CM15-2
100
2.3
4.0
2'' 2'' 3/8'' 12.0 198 199 160 220 100 245 477 205 190 97 140 170 108 272 380
CM15-3
112
3.5
6.2
2'' 2'' 3/8'' 12.0 220 228 190 246 112 257 560 258 242 127 140 172 131 302 433
76
Dimensions
A4
21
CM 15-I and CM 15-G

60 Hz
50/60 Hz
CM 15-I and CM 15-G
TM04 2246 2208
Dimensions
3
3
3
3
x
x
x
x

P2 [kW]
Dimensions
Frame
size
50 Hz
CM15-1
90
1.45/2.5*
CM15-2
100
2.36/4.0*
2'' 2'' 3/8'' 12.0 198 199 160 220 100 218 507 235 220 105 140 170 130 272 402
CM15-3
132
4.2/6.2*
6.2
2'' 2'' 3/8'' 12.0 220 228 190 246 112 230 559 257 241 105 140 172 152 302 454
Pump type
60 Hz A1 A2 A3
2.5
A4
B1
B2
B3
H1
H2
L1
L2
L3
L4
L5
L6
L7
L8
L9
2'' 2'' 3/8'' 10.2 180 199 160 210 100 218 490 219 204 105 140 170 114 272 385

Note: The dimension H is smaller than H2 for CM 15-1.
CM 15-1, CM 15-2 and CM 15-3 are not available with supply voltage O.

Pump type
P2 [kW]
Frame
Dimensions
A4
B1
B2
B3
H1
H2
L1
L2
L3
L4
L5
L6
L7
L8
L9
CM15-1
90
1.4
2.5
2'' 2'' 3/8'' 10.2 180 199 160 210 100 218 490 219 204 105 140 170 114 272 385
CM15-2
100
2.3
4.0
2'' 2'' 3/8'' 12.0 198 199 160 220 100 218 507 235 220 105 140 170 130 272 402
CM15-3
112
3.5
6.2
2'' 2'' 3/8'' 12.0 220 228 190 246 112 230 559 257 241 105 140 172 152 302 454

77
21
CM 25-A
60 Hz
50/60 Hz
CM 25-A
TM04 6111 4909
Dimensions
3
3
3
3
x
x
x
x

P2 [kW]
Dimensions
Frame
size
50 Hz
CM25-1
100
2.36/4.0*
2'' 2'' 3/8'' 12.0 198 199 160 220 100 245 477 205 190 97 140 170 108 272 380
CM25-2
132
4.2/6.2*
6.2
2'' 2'' 3/8'' 12.0 220 228 190 246 112 257 530 228 212 97 140 172 131 302 433
Pump type
60 Hz A1 A2 A3
A4
B1
B2
B3
H1
H2
L1
L2
L3 L4 L5
L6
L7
L8
L9


Pump type
P2 [kW]
Frame
B1
B2
B3
H1
H2
L1
L2
L3 L4 L5
L6
L7
L8
L9
CM25-1
100
2.3
4.0
2'' 2'' 3/8'' 12.0 198 199 160 220 100 245 477 205 190 97 140 170 108 272 380
CM25-2
112
3.5
6.2
2'' 2'' 3/8'' 12.0 220 228 190 246 112 257 530 228 212 97 140 172 131 302 433
78
Dimensions
A4
21
CM 25-I and CM 25-G

60 Hz
50/60 Hz
CM 25-I and CM 25-G
TM04 2246 2208
Dimensions
3
3
3
3
x
x
x
x

P2 [kW]
Dimensions
Frame
size
50 Hz
CM25-1
100
2.36/4.0*
2'' 2'' 3/8'' 12.0 198 199 160 220 100 218 507 235 220 105 140 170 130 272 402
CM25-2
132
4.2/6.2*
6.2
2'' 2'' 3/8'' 12.0 220 228 190 246 112 230 559 257 241 105 140 172 152 302 454
Pump type
60 Hz A1 A2 A3
A4
B1
B2
B3
H1
H2
L1
L2
L3
L4
L5
L6
L7
L8
L9


Pump type
P2 [kW]
Frame
Dimensions
A4
B1
B2
B3
H1
H2
L1
L2
L3
L4
L5
L6
L7
L8
L9
CM25-1
100
2.3
4.0
2'' 2'' 3/8'' 12.0 198 199 160 220 100 218 507 235 220 105 140 170 130 272 402
CM25-2
112
3.5
6.2
2'' 2'' 3/8'' 12.0 220 228 190 246 112 230 559 257 241 105 140 172 152 302 454
79
22
CME 1-A
60 Hz
50/60 Hz
Dimensions, CME 60 Hz and 50/60 Hz
22. Dimensions, CME 60 Hz and 50/60 Hz

CME 1-A
TM04 2249 2208
Dimensions
1 x 200-240 V, 50/60 Hz (supply voltage K)
Pump type
Frame P [kW]
2
size
A1 A2 A3 A4 B1
B3
H1 H2
L1
L2
L3
L4 L5 L6 L7 L8
L9
CME1-2
71
0.55
1'' 1'' 3/8'' 10 210 158 125 215 75 149 288 114 89
CME1-3
71
0.55
1'' 1'' 3/8'' 10 210 158 125 215 75 149 306 132 107 104 96 137 28 174 202
CME1-4
71
0.55
1'' 1'' 3/8'' 10 210 158 125 215 75 149 324 150 125 122 96 137 28 174 202
CME1-5
80
1.10
1'' 1'' 3/8'' 10 210 158 125 215 75 149 382 168 143 140 96 137 28 214 242
80
Dimensions
B2
86 96 137 28 174 202
22
CME 1-I and CME 1-G

60 Hz
50/60 Hz
CME 1-I and CME 1-G
TM04 2247 2208
Dimensions
Pump type
Frame P [kW]
2
size
A1 A2 A3 A4 B1
Dimensions
B2
B3
H1 H2
L1
L2
L3
L4 L5 L6 L7 L8
L9
CME1-2
71
0.55
1'' 1'' 3/8'' 10 210 158 125 215 75 165 305 131 107 72 96 137 60 174 234
CME1-3
71
0.55
1'' 1'' 3/8'' 10 210 158 125 215 75 165 305 131 107 72 96 137 60 174 234
CME1-4
71
0.55
1'' 1'' 3/8'' 10 210 158 125 215 75 165 323 149 125 90 96 137 60 174 234
CME1-5
80
1.10
1'' 1'' 3/8'' 10 210 158 125 215 75 165 381 167 143 108 96 137 60 214 274
CME1-6
80
1.10
1'' 1'' 3/8'' 10 210 158 125 215 75 165 417 203 179 144 96 137 60 214 274
CME1-7
80
1.10
1'' 1'' 3/8'' 10 210 158 125 215 75 165 417 203 179 144 96 137 60 214 274
CME1-8
80
1.10
1'' 1'' 3/8'' 10 210 158 125 215 75 165 453 239 215 180 96 137 60 214 274

Pump type
CME1-9
Frame P [kW]
2
size
A1 A2 A3 A4 B1
90
1.50
Dimensions
B2
B3
H1 H2
L1
L2
L3
L4
L5
L6 L7 L8
L9
1'' 1'' 3/8'' 10 264 178 140 257 90 180 503 279 264 180 125 155 99 224 323

Pump type
CME1-9
Frame P [kW]
2
size
A1 A2 A3 A4 B1
90
1.50
Dimensions
B2
B3
H1 H2
L1
L2
L3
L4
L5
L6 L7 L8
L9
1'' 1'' 3/8'' 10 264 178 140 257 90 180 503 279 264 180 125 155 99 224 323
81
22
CME 3-A
60 Hz
50/60 Hz
CME 3-A
TM04 2249 2208
Dimensions
Pump type
Frame P [kW]
2
size
A1 A2 A3 A4 B1
B3
H1 H2
L1
L2
L3
L4 L5 L6 L7 L8
L9
CME3-2
71
0.55
1'' 1'' 3/8'' 10 210 158 125 215 75 149 288 114 89
CME3-3
80
1.10
1'' 1'' 3/8'' 10 210 158 125 215 75 149 346 132 107 104 96 137 28 214 242
CME3-4
80
1.10
1'' 1'' 3/8'' 10 210 158 125 215 75 149 364 150 125 122 96 137 28 214 242
CME3-5
80
1.10
1'' 1'' 3/8'' 10 210 158 125 215 75 149 382 168 143 140 96 137 28 214 242
82
Dimensions
B2
86 96 137 28 174 202
22
CME 3-I and CME 3-G

60 Hz
50/60 Hz
CME 3-I and CME 3-G
TM04 2247 2208
Dimensions
Pump type
Frame P [kW]
2
size
A1 A2 A3 A4 B1
Dimensions
B2
B3
H1 H2
L1
L2
L3
L4 L5 L6 L7 L8
L9
CME3-2
71
0.55
1'' 1'' 3/8'' 10 210 158 125 215 75 165 305 131 107 72 96 137 60 174 234
CME3-3
80
1.10
1'' 1'' 3/8'' 10 210 158 125 215 75 165 345 131 107 72 96 137 60 214 274
CME3-4
80
1.10
1'' 1'' 3/8'' 10 210 158 125 215 75 165 363 149 125 90 96 137 60 214 274
CME3-5
80
1.10
1'' 1'' 3/8'' 10 210 158 125 215 75 165 381 167 143 108 96 137 60 214 274

Pump type
Frame P [kW]
2
size
A1 A2 A3 A4 B1
Dimensions
B2
B3
H1 H2
L1
L2
L3
L4
L5
L6 L7 L8
L9
CME3-6
90
1.50
1'' 1'' 3/8'' 10 264 178 140 257 90 180 467 243 228 144 125 155 99 224 323
CME3-7
90
1.50
1'' 1'' 3/8'' 10 264 178 140 257 90 180 467 243 228 144 125 155 99 224 323
CME3-8
90
2.20
1'' 1'' 3/8'' 10 264 178 140 257 90 180 543 279 264 180 125 155 99 264 363
CME3-9
90
2.20
1'' 1'' 3/8'' 10 264 178 140 257 90 180 543 279 264 180 125 155 99 264 363

Pump type
Frame P [kW]
2
size
A1 A2 A3 A4 B1
Dimensions
B2
B3
H1 H2
L1
L2
L3
L4
L5
L6 L7 L8
L9
CME3-6
90
1.50
1'' 1'' 3/8'' 10 264 178 140 257 90 180 467 243 228 144 125 155 99 224 323
CME3-7
90
1.50
1'' 1'' 3/8'' 10 264 178 140 257 90 180 467 243 228 144 125 155 99 224 323
CME3-8
90
1.50
1'' 1'' 3/8'' 10 264 178 140 257 90 180 503 279 264 180 125 155 99 224 323
CME3-9
90
2.20
1'' 1'' 3/8'' 10 264 178 140 257 90 180 543 279 264 180 125 155 99 264 363
83
22
CME 5-A
60 Hz
50/60 Hz
CME 5-A
TM04 2249 2208
Dimensions
Pump type
Frame P [kW]
2
size
A1
Dimensions
A2
A3 A4 B1
B2
B3
H1 H2
L1
L2
L3
L4 L5 L6 L7 L8
L9
CME5-2
80
1.10
1'' 1 1/4'' 3/8'' 10 210 158 125 215 75 149 328 114 89
86 96 137 28 214 242
CME5-3
80
1.10
1'' 1 1/4'' 3/8'' 10 210 158 125 215 75 149 346 132 107 104 96 137 28 214 242

Pump type
Frame P [kW]
2
size
A1
Dimensions
A2
A3 A4 B1
B2
B3
H1 H2
L1
L2
L3
L4
L5
L6 L7 L8
L9
CME5-4
90
1.50
1'' 1 1/4'' 3/8'' 10 264 178 140 257 90 201 414 190 175 108 125 155 82 224 306
CME5-5
90
2.20
1'' 1 1/4'' 3/8'' 10 264 178 140 257 90 201 472 208 193 126 125 155 82 264 346

Pump type
Frame P [kW]
2
size
A1
Dimensions
A2
A3 A4 B1
B3
H1 H2
L1
L2
L3
L4
L5
L6 L7 L8
L9
CME5-4
90
1.50
1'' 1 1/4'' 3/8'' 10 264 178 140 257 90 201 414 190 175 108 125 155 82 224 306
CME5-5
90
1.50
1'' 1 1/4'' 3/8'' 10 264 178 140 257 90 201 432 208 193 126 125 155 82 224 306
84
B2
22
CME 5-I and CME 5-G

60 Hz
50/60 Hz
CME 5-I and CME 5-G
TM04 2247 2208
Dimensions
Pump type
Frame P [kW]
2
size
A1
Dimensions
A2
A3 A4 B1
B2
B3
H1 H2
L1
L2
L3 L4 L5 L6 L7 L8
L9
CME5-2
80
1.10
1'' 1 1/4'' 3/8'' 10 210 158 125 215 75 165 345 131 107 72 96 137 60 214 274
CME5-3
80
1.10
1'' 1 1/4'' 3/8'' 10 210 158 125 215 75 165 345 131 107 72 96 137 60 214 274

Pump type
Frame P [kW]
2
size
A1
Dimensions
A2
A3 A4 B1
B2
B3
H1
H2
L1
L2
L3
L4
L5
L6
L7
L8
L9
CME5-4
90
1.50
1'' 1 1/4'' 3/8'' 10 264 178 140 257 90 180 413 189 174 90 125 155 99 224 323
CME5-5
90
2.20
1'' 1 1/4'' 3/8'' 10 264 178 140 257 90 180 471 207 192 108 125 155 99 264 363
CME5-6
90
2.20
1'' 1 1/4'' 3/8'' 10 264 178 140 257 90 180 507 243 228 144 125 155 99 264 363
CME5-7
100
3.0
1'' 1 1/4'' 3/8'' 12 264 199 160 277 100 190 525 253 238 144 140 170 109 272 381
CME5-8
100
3.0
1'' 1 1/4'' 3/8'' 12 264 199 160 277 100 190 561 289 274 180 140 170 109 272 381

Pump type
Frame P [kW]
2
size
A1
Dimensions
A2
A3 A4 B1
B2
B3
H1 H2
L1
L2
L3
L4
L5
L6 L7 L8
L9
CME5-4
90
1.50
1'' 1 1/4'' 3/8'' 10 264 178 140 257 90 180 413 189 174 90 125 155 99 224 323
CME5-5
90
1.50
1'' 1 1/4'' 3/8'' 10 264 178 140 257 90 180 431 207 192 108 125 155 99 224 323
CME5-6
90
2.20
1'' 1 1/4'' 3/8'' 10 264 178 140 257 90 180 507 243 228 144 125 155 99 264 363
CME5-7
90
2.20
1'' 1 1/4'' 3/8'' 10 264 178 140 257 90 180 507 243 228 144 125 155 99 264 363
85
22
CME 10-A
60 Hz
50/60 Hz
CME 10-A
TM04 6110 2208
Dimensions
Pump type
CME10-1
Frame P [kW]
2
size
80
1.10
Dimensions
A1
A2
A3
A4
B1
B2
B3
H1
H2
L1
L2
L3 L4 L5 L6 L7 L8
L9
1 1/2'' 1 1/2'' 3/8'' 10.2 210 158 125 240 100 245 369 155 131 97 96 137 58 214 272


Pump type
Frame P [kW]
2
size
Dimensions
A1
A2
A3
A4
B1
B2
B3
H1
H2
L1
L2
L3
L4
L5
L6
L7
L8
L9
CME10-2
90
2.20
1 1/2'' 1 1/2'' 3/8'' 10.2 264 199 160 267 100 245 461 190 175 97 140 170 93 272 364
CME10-3
112
4.0
1 1/2'' 1 1/2'' 3/8'' 12.0 290 228 190 300 112 257 560 258 242 127 140 172 131 302 433

Pump type
Frame P [kW]
2
size
Dimensions
A1
A2
A3
B1
B2
B3
H1
H2
L1
L2
L3
L4
L5
L6
L7
L8
L9
CME10-2
90
2.20
1 1/2'' 1 1/2'' 3/8'' 10.2 264 199 160 267 100 245 461 190 175 97 140 170 93 272 364
CME10-3
112
4.0
1 1/2'' 1 1/2'' 3/8'' 12.0 290 228 190 300 112 257 560 258 242 127 140 172 131 302 433
86
A4
22

60 Hz
50/60 Hz
TM04 2247 2208
Dimensions
Pump type
CME10-1
Frame P [kW]
2
size
80
1.10
Dimensions
A1
A2
A3
A4
B1
B2
B3
H1
H2
L1
L2
L3
L4 L5 L6 L7 L8
L9
1 1/2'' 1 1/2'' 3/8'' 10.2 210 158 125 240 100 218 399 185 161 105 96 137 80 214 294

Pump type
Frame P [kW]
2
size
Dimensions
A1
A2
A3
A4
B1
B2
B3
H1
H2
L1
L2
L3
L4
L5
L6
L7
L8
L9
CME10-2
90
2.20
1 1/2'' 1 1/2'' 3/8'' 10.2 264 199 160 267 100 218 490 219 204 105 140 170 114 272 385
CME10-3
112
4.0
1 1/2'' 1 1/2'' 3/8'' 12.0 290 228 190 300 112 230 559 257 241 105 140 172 152 302 454
CME10-4
132
5.5
1 1/2'' 1 1/2'' 3/8'' 12.0 290 228 190 300 112 230 589 287 271 135 140 172 152 302 454
CME10-5
132
5.5
1 1/2'' 1 1/2'' 3/8'' 12.0 290 228 190 300 112 230 649 347 331 195 140 172 152 302 454

Pump type
Frame P [kW]
2
size
Dimensions
A1
A2
A3
A4
B1
B2
B3
H1
H2
L1
L2
L3
L4
L5
L6
L7
L8
L9
CME10-2
90
2.20
1 1/2'' 1 1/2'' 3/8'' 10.2 264 199 160 267 100 218 490 219 204 105 140 170 114 272 385
CME10-3
112
4.0
1 1/2'' 1 1/2'' 3/8'' 12.0 290 228 190 300 112 230 559 257 241 105 140 172 152 302 454
CME10-4
112
4.0
1 1/2'' 1 1/2'' 3/8'' 12.0 290 228 190 300 112 230 589 287 271 135 140 172 152 302 454
CME10-5
132
5.5
1 1/2'' 1 1/2'' 3/8'' 12.0 290 228 190 300 112 230 649 347 331 195 140 172 152 302 454
87
22
CME 15-A
60 Hz
50/60 Hz
CME 15-A
TM04 2249 2208
Dimensions
Pump type
Frame P [kW]
2
size
A1 A2 A3
Dimensions
A4
B1
B2
B3
H1
H2
L1
L2
L3
L4
L5
L6
L7
L8
L9
CME15-1
90
2.20
2'' 2'' 3/8'' 10.2 264 199 160 267 100 245 461 190 175 97 140 170 93 272 364
CME15-2
112
4.0
2'' 2'' 3/8'' 12.0 290 228 190 300 112 257 530 228 212 97 140 172 131 302 433
CME15-3
132
7.5
2'' 2'' 3/8'' 12.0 290 228 190 300 112 257 560 258 242 127 140 172 131 302 433

Pump type
Frame P [kW]
2
size
A1 A2 A3
Dimensions
A4
B2
B3
H1
H2
L1
L2
L3
L4
L5
L6
L7
L8
L9
CME15-1
90
2.20
2'' 2'' 3/8'' 10.2 264 199 160 267 100 245 461 190 175 97 140 170 93 272 364
CME15-2
112
4.0
2'' 2'' 3/8'' 12.0 290 228 190 300 112 257 530 228 212 97 140 172 131 302 433
CME15-3
132
5.5
2'' 2'' 3/8'' 12.0 290 228 190 300 112 257 560 258 242 127 140 172 131 302 433
88
B1
22

60 Hz
50/60 Hz
TM04 2247 2208
Dimensions
Pump type
Frame P [kW]
2
size
A1 A2 A3
Dimensions
A4
B1
B2
B3
H1
H2
L1
L2
L3
L4
L5
L6
L7
L8
L9
CME15-1
90
2.20
2'' 2'' 3/8'' 10.2 264 199 160 267 100 218 490 219 204 105 140 170 114 272 385
CME15-2
112
4.0
2'' 2'' 3/8'' 12.0 290 228 190 300 112 230 559 257 241 105 140 172 152 302 454
CME15-3
132
7.5
2'' 2'' 3/8'' 12.0 290 228 190 300 112 230 559 257 241 105 140 172 152 302 454

Pump type
Frame P [kW]
2
size
A1 A2 A3
Dimensions
A4
B1
B2
B3
H1
H2
L1
L2
L3
L4
L5
L6
L7
L8
L9
CME15-1
90
2.20
2'' 2'' 3/8'' 10.2 264 199 160 267 100 218 490 219 204 105 140 170 114 272 385
CME15-2
112
4.0
2'' 2'' 3/8'' 12.0 290 228 190 300 112 230 559 257 241 105 140 172 152 302 454
CME15-3
132
5.5
2'' 2'' 3/8'' 12.0 290 228 190 300 112 230 559 257 241 105 140 172 152 302 454
89
22
CME 25-A
60 Hz
50/60 Hz
CME 25-A
TM04 2249 2208
Dimensions
Pump type
Frame P [kW]
2
size
A1 A2 A3
Dimensions
A4
B1
B2
B3
H1
H2
L1
L2
L3 L4 L5
L6
L7
L8
L9
CME25-1
100
3.0
2'' 2'' 3/8'' 12.0 264 199 160 277 100 245 477 205 190 97 140 170 108 272 380
CME25-2
132
7.5
2'' 2'' 3/8'' 12.0 290 228 190 300 112 257 530 228 212 97 140 172 131 302 433

Pump type
Frame P [kW]
2
size
A1 A2 A3
Dimensions
A4
B2
B3
H1
H2
L1
L2
L3 L4 L5
L6
L7
L8
L9
CME25-1
112
4.0
2'' 2'' 3/8'' 12.0 290 228 190 300 112 257 530 228 212 97 140 172 131 302 433
CME25-2
132
5.5
2'' 2'' 3/8'' 12.0 290 228 190 300 112 257 530 228 212 97 140 172 131 302 433
90
B1
22

60 Hz
50/60 Hz
TM04 2247 2208
Dimensions
Pump type
Frame P [kW]
2
size
A1 A2 A3
Dimensions
A4
B1
B2
B3
H1
H2
L1
L2
L3
L4
L5
L6
L7
L8
L9
CME25-1
100
3.0
2'' 2'' 3/8'' 12.0 264 199 160 277 100 218 507 235 220 105 140 170 130 272 402
CME25-2
132
7.5
2'' 2'' 3/8'' 12.0 290 228 190 300 112 230 559 257 241 105 140 172 152 302 454

Pump type
Frame P [kW]
2
size
A1 A2 A3
Dimensions
A4
B1
B2
B3
H1
H2
L1
L2
L3
L4
L5
L6
L7
L8
L9
CME25-1
112
4.0
2'' 2'' 3/8'' 12.0 290 228 190 300 112 230 559 257 241 105 140 172 152 302 454
CME25-2
132
5.5
2'' 2'' 3/8'' 12.0 290 228 190 300 112 230 559 257 241 105 140 172 152 302 454
91
CM, CME
23
Weights and shipping volume
23. Weights and shipping volume

All weights and volumes refer to CM(E) pumps with standard pipe connections.3
CM 1-A
Supply voltage

3
3
3
3
3
x
x
x
x
x

Pump type
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
Net weight
[kg]
Gross weight Shipping volume

[kg]
[m3]
1-2
1-3
1-4
1-5
1-6
1-7
1-8
1-2
1-3
1-4
1-5
1-2
1-3
1-4
1-5
1-6
1-7
1-8
1-2
1-3
1-4
1-5
1-2
1-3
1-4
11.0
11.3
12.2
12.5
12.8
13.0
14.7
11.7
12.0
12.2
12.5
11.0
11.3
11.5
11.8
12.1
13.0
13.3
11.0
11.3
12.2
12.5
11.0
11.3
12.2
13.5
13.8
14.7
15.0
15.3
15.5
17.2
14.2
14.5
14.7
15.0
13.5
13.8
14.0
14.3
14.6
15.5
15.8
13.5
13.8
14.7
15.0
13.5
13.8
14.7
0.02
0.02
0.02
0.02
0.03
0.03
0.03
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.03
0.03
0.03
0.02
0.02
0.02
0.02
0.02
0.02
0.02
CM 1-5
12.5
15.0
0.02
CM 3-A
Supply voltage


3
3
3
3
3
92
x
x
x
x
x

Pump type
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
Net weight
[kg]

[kg]
[m3]
3-2
3-3
3-4
3-5
3-6
3-7
3-8
3-2
3-3
3-4
3-5
3-2
3-3
3-4
3-5
3-6
3-7
3-8
3-2
3-3
3-4
3-5
3-2
3-3
3-4
11.0
12.0
12.2
12.5
14.2
15.5
15.8
11.7
12.0
13.6
15.0
11.0
11.3
11.5
12.5
12.8
15.8
16.8
11.0
12.0
12.2
15.3
11.0
12.0
12.2
13.5
14.5
14.7
15.0
16.7
18.0
18.3
14.2
14.5
16.1
17.5
13.5
13.8
14.0
15.0
15.3
18.3
19.3
13.5
14.5
14.7
17.8
13.5
14.5
14.7
0.0200
0.0200
0.0200
0.0200
0.0300
0.0300
0.0300
0.0200
0.0200
0.0300
0.0400
0.0200
0.0200
0.0200
0.0200
0.0300
0.0300
0.0400
0.0200
0.0200
0.0200
0.0300
0.0200
0.0200
0.0200
CM 3-5
13.9
16.4
0.0370
CM, CME
23
CM 5-A
Supply voltage


3
3
3
3
3
x
x
x
x
x

Pump type
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
Net weight
[kg]

[kg]
[m3]
5-2
5-3
5-4
5-5
5-6
5-7
5-8
5-2
5-3
5-4
5-2
5-3
5-4
5-5
5-6
5-7
5-8
5-2
5-3
5-4
5-5
5-2
5-3
5-4
11.6
11.9
13.5
14.9
22.7
23.0
23.2
13.0
14.4
24.3
10.9
11.9
14.9
15.9
16.2
25.8
26.0
11.6
14.7
24.3
29.7
11.6
14.7
24.3
14.1
14.4
16.0
17.4
25.2
25.5
25.7
15.5
16.9
26.8
13.4
14.4
17.4
18.4
18.7
28.3
28.5
14.1
17.2
26.8
32.2
14.1
17.2
26.8
0.0200
0.0200
0.0300
0.0300
0.0400
0.0400
0.0400
0.0200
0.0400
0.0400
0.0200
0.0200
0.0300
0.0300
0.0300
0.0400
0.0400
0.0200
0.0300
0.0300
0.0400
0.0200
0.0300
0.0300
CM 5-5
29.7
32.2
0.0400
CM 10-A
Net weight
[kg]

[kg]
[m3]
Supply voltage
Pump type
CM 10-1
CM 10-2
CM 10-3
22.2
29.8
32.6
24.7
32.3
35.1
0.0400
0.0400
0.0400

CM 10-1
23.4
25.9
0.0400
CM
CM
CM
CM
CM
CM
CM
CM
20.9
25.0
35.8
38.6
39.3
24.4
37.1
40.8
23.4
27.5
38.3
41.1
41.8
26.9
39.6
43.3
0.0400
0.0400
0.0400
0.0500
0.0500
0.0400
0.0400
0.0400
CM 10-1
24.3
26.8
0.0400
CM 10-2
37.1
39.6
0.0400
CM 10-3
40.8
43.3
0.0400

3
3
3
3
3
x
x
x
x
x

10-1
10-2
10-3
10-4
10-5
10-11
10-12
10-13
93
CM, CME
23
CM 15-A
Supply voltage

3
3
3
3
x
x
x
x

Pump type
CM
CM
CM
CM
CM
CM
CM
CM
CM
Net weight
[kg]

[kg]
[m3]
15-1
15-2
15-1
15-2
15-3
15-4
15-1
15-2
15-3
28.5
31.3
23.7
34.5
40.2
56.0
35.8
39.5
52.0
31.0
33.8
26.2
37.0
42.7
58.5
38.3
42.0
54.5
0.0400
0.0400
0.0400
0.0400
0.0400
0.0800
0.0400
0.0400
0.0800
CM 15-1
35.8
38.3
0.0400
CM 15-2
39.5
42.0
0.0400
CM 15-3
52.0
54.5
0.0800
CM 25-A
Supply voltage
Pump type
CM
CM
CM
CM
CM
CM
CM

3
3
3
3
94
x
x
x
x

Net weight
[kg]

[kg]
[m3]
25-1
25-1
25-2
25-3
25-4
25-1
25-2
30.6
33.8
39.5
55.3
56.4
38.8
51.3
33.1
36.3
42.0
57.8
58.9
41.3
53.8
0.0400
0.0400
0.0400
0.0800
0.0800
0.0400
0.0800
CM 25-1
38.8
41.3
0.0400
CM 25-2
51.3
53.8
0.0800
CM, CME
23
CM 1-I and CM 1-G

Supply voltage

3
3
3
3
3
x
x
x
x
x

Pump type
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
1-2
1-3
1-4
1-5
1-6
1-7
1-8
1-9
1-10
1-11
1-12
1-13
1-14
1-2
1-3
1-4
1-5
1-6
1-7
1-8
1-9
1-2
1-3
1-4
1-5
1-6
1-7
1-8
1-9
1-10
1-11
1-12
1-13
1-14
1-2
1-3
1-4
1-5
1-6
1-7
1-8
1-9
1-2
1-3
1-4
1-5
1-6
1-7
1-8
1-9
Net weight
[kg]
11.6
11.7
12.7
13.1
13.7
13.8
15.7
15.8
16.4
17.6
18.5
18.6
24.3
11.6
11.7
12.0
12.4
13.0
13.8
14.4
14.4
17.8
17.9
18.8
19.6
19.6
12.3
12.4
12.7
13.1
15.1
16.3
16.8
16.9
11.6
11.7
12.7
13.1
13.7
13.8
17.2
17.9
11.6
11.7
12.7
13.1
13.7
13.8
17.2
17.9

[kg]
[m3]
14.1
14.2
15.2
15.6
16.2
16.3
18.3
18.3
18.9
20.1
21.0
21.1
26.8
14.1
14.2
14.5
14.9
15.5
16.3
16.8
16.9
20.3
20.4
21.3
22.1
22.1
14.8
14.9
15.2
15.6
17.6
18.8
19.3
19.4
14.1
14.2
15.2
15.6
16.2
16.3
19.7
20.4
14.1
14.2
15.2
15.6
16.2
16.3
19.7
20.4
0.0200
0.0200
0.0200
0.0200
0.0300
0.0300
0.0400
0.0400
0.0400
0.0400
0.0500
0.0500
0.0800
0.0200
0.0200
0.0200
0.0200
0.0300
0.0300
0.0300
0.0300
0.0400
0.0400
0.0500
0.0500
0.0500
0.0200
0.0200
0.0200
0.0200
0.0300
0.0400
0.0400
0.0400
0.0200
0.0200
0.0200
0.0200
0.0300
0.0300
0.0400
0.0400
0.0200
0.0200
0.0200
0.0200
0.0300
0.0300
0.0400
0.0400
95
CM, CME
23
CM 3-I and CM 3-G

Supply voltage

3
3
3
3
3
96
x
x
x
x
x

Pump type
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
3-2
3-3
3-4
3-5
3-6
3-7
3-8
3-9
3-10
3-11
3-12
3-13
3-14
3-2
3-3
3-4
3-5
3-6
3-7
3-8
3-2
3-3
3-4
3-5
3-6
3-7
3-8
3-9
3-10
3-11
3-12
3-13
3-14
3-2
3-3
3-4
3-5
3-6
3-7
3-8
3-9
3-2
3-3
3-4
3-5
3-6
3-7
3-8
3-9
Net weight
[kg]
11.6
12.4
12.7
13.1
15.1
16.3
16.8
22.6
23.2
23.3
24.2
24.2
26.4
11.6
11.7
12.0
13.1
13.7
16.6
17.8
17.9
18.5
26.1
27.0
27.0
30.0
12.3
12.4
14.1
15.6
24.0
24.0
24.6
11.6
12.4
12.7
15.9
17.2
24.0
29.8
29.9
11.6
12.4
12.7
15.9
17.2
24.0
29.8
29.9

[kg]
[m3]
14.1
14.9
15.2
15.6
17.6
18.8
19.3
25.1
25.7
25.8
26.7
26.7
28.9
14.1
14.2
14.5
15.6
16.2
19.1
20.3
20.4
21.0
28.6
29.5
29.5
32.5
14.8
14.9
16.6
18.1
26.5
26.5
27.1
14.1
14.9
15.2
18.4
19.7
26.5
32.3
32.4
14.1
14.9
15.2
18.4
19.7
26.5
32.3
32.4
0.0200
0.0200
0.0200
0.0200
0.0300
0.0300
0.0400
0.0400
0.0500
0.0500
0.0800
0.0800
0.0800
0.0200
0.0200
0.0200
0.0200
0.0300
0.0300
0.0400
0.0400
0.0400
0.0500
0.0800
0.0800
0.0800
0.0200
0.0200
0.0300
0.0400
0.0400
0.0400
0.0400
0.0200
0.0200
0.0200
0.0300
0.0300
0.0400
0.0500
0.0500
0.0200
0.0200
0.0200
0.0300
0.0300
0.0400
0.0500
0.0500
CM, CME
23
CM 5-I and CM 5-G

Supply voltage

3
3
3
3
3
x
x
x
x
x

Pump type
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
5-2
5-3
5-4
5-5
5-6
5-7
5-8
5-9
5-10
5-11
5-2
5-3
5-4
5-2
5-3
5-4
5-5
5-6
5-7
5-8
5-9
5-10
5-11
5-12
5-13
5-2
5-3
5-4
5-5
5-6
5-7
5-8
5-2
5-3
5-4
5-5
5-6
5-7
5-8
Net weight
[kg]
12.3
12.4
14.1
15.5
21.8
21.9
22.5
24.7
25.3
25.4
11.6
12.4
15.5
16.5
17.1
24.7
25.3
28.3
28.9
29.0
31.5
31.6
13.7
14.9
23.0
12.3
15.2
23.0
28.5
29.1
29.2
32.8
12.3
15.2
23.0
28.5
29.1
29.2
32.8

[kg]
[m3]
14.8
14.9
16.6
18.0
24.3
24.4
25.0
27.2
27.8
27.9
14.1
14.9
18.0
19.0
19.6
27.2
27.8
30.8
31.4
31.5
34.0
34.1
16.2
17.4
25.5
14.8
17.7
25.5
31.0
31.6
31.7
35.3
14.8
17.7
25.5
31.0
31.6
31.7
35.3
0.0200
0.0200
0.0300
0.0300
0.0400
0.0400
0.0400
0.0400
0.0500
0.0500
0.0200
0.0200
0.0300
0.0300
0.0300
0.0400
0.0400
0.0500
0.0500
0.0500
0.0800
0.0800
0.0200
0.0400
0.0400
0.0200
0.0200
0.0300
0.0400
0.0400
0.0400
0.0500
0.0200
0.0200
0.0300
0.0400
0.0400
0.0400
0.0500
97
CM, CME
23
CM 10-I and CM 10-G

Supply voltage

3
3
3
3
3
x
x
x
x
x

Pump type
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
CM
Net weight
[kg]
10-1
10-2
10-3
10-1
10-2
10-3
10-4
10-5
10-6
10-7
10-8
10-1
10-2
10-3
10-4
10-5
10-1
10-2
10-3
10-4
10-5
17.6
24.8
27.1
16.3
19.0
30.3
33.2
34.6
37.7
54.3
54.5
18.8
32.1
35.3
48.0
49.4
18.8
32.1
35.3
48.0
49.4
Pump type
Net weight
[kg]

[kg]
[m3]
20.1
27.3
29.6
18.8
21.5
32.8
35.7
37.1
40.2
56.8
57.0
21.3
34.6
37.8
50.5
51.9
21.3
34.6
37.8
50.5
51.9
0.0400
0.0400
0.0400
0.0400
0.0400
0.0400
0.0500
0.0800
0.0800
0.0800
0.0800
0.0400
0.0400
0.0400
0.0500
0.0800
0.0400
0.0400
0.0400
0.0500
0.0800
CM 15-I and CM 15-G

Supply voltage

3
3
3
3
98
x
x
x
x

CM
CM
CM
CM
CM
CM
CM
CM
CM

[kg]
[m3]
15-1
15-2
15-1
15-2
15-3
15-4
15-1
15-2
15-3
24.5
26.8
18.7
30.0
35.2
51.2
31.8
35.0
47.0
27.0
29.3
21.2
32.5
37.7
53.7
34.3
37.5
49.5
0.0400
0.0400
0.0400
0.0400
0.0400
0.0500
0.0400
0.0400
0.0500
CM 15-1
31.8
34.3
0.0400
CM 15-2
35.0
37.5
0.0400
CM 15-3
47.0
49.5
0.0500
CM, CME
23
CM 25-I and CM 25-G

Supply voltage
Pump type
CM
CM
CM
CM
CM
CM
CM

3
3
3
3
x
x
x
x

Net weight
[kg]

[kg]
[m3]
25-1
25-1
25-2
25-3
25-4
25-1
25-2
26.6
29.8
35.0
50.3
51.6
34.8
46.8
29.1
32.3
37.5
52.8
54.1
37.3
49.3
0.0400
0.0400
0.0400
0.0500
0.0500
0.0400
0.0500
CM 25-1
34.8
37.3
0.0400
CM 25-3
46.8
49.3
0.0500
CME 1-A
Supply voltage
Pump type

CME
CME
CME
CME
1-2
1-3
1-4
1-5
Net weight
[kg]
14.4
14.7
14.9
17.6

[kg]
[m3]
17.9
18.2
18.4
21.1
0.0300
0.0300
0.0400
0.0400
CME 3-A
Supply voltage
Pump type

CME
CME
CME
CME
3-2
3-3
3-4
3-5
Net weight
[kg]
14.4
17.1
17.3
17.6

[kg]
[m3]
17.9
20.6
20.8
21.1
0.0300
0.0400
0.0400
0.0400
CME 5-A
Supply voltage
Pump type

CME
CME
CME
CME
CME
CME

5-2
5-3
5-4
5-5
5-4
5-5
Net weight
[kg]
16.7
17.0
30.0
34.2
31.3
31.5

[kg]
[m3]
20.2
20.5
33.5
37.7
34.8
35.0
0.040
0.040
0.080
0.080
0.080
0.080
CME 10-A
Net weight
[kg]

[kg]
[m3]
Supply voltage
Pump type

CME 10-1
25.9
29.4
0.040
CME
CME
CME
CME
41.6
63.5
41.7
60.2
45.1
67.0
45.2
63.7
0.080
0.080
0.080
0.080

10-2
10-3
10-2
10-3
99
CM, CME
23
CME 15-A
Supply voltage
Pump type
CME
CME
CME
CME
CME
CME
15-1
15-2
15-3
15-1
15-2
15-3
Net weight
[kg]
40.3
62.1
67.0
40.4
58.8
63.2

[kg]
[m3]
43.8
65.6
70.5
43.9
62.3
66.7
0.080
0.080
0.080
0.080
0.080
0.080
CME 25-A
Supply voltage
100
Pump type
CME
CME
CME
CME
25-1
25-2
25-1
25-2
Net weight
[kg]
43.5
66.3
58.2
62.5

[kg]
[m3]
47.0
69.8
61.7
66.0
0.080
0.080
0.080
0.080
CM, CME
23
CME 1-I and CME 1-G

Supply voltage


Pump type
CME
CME
CME
CME
CME
CME
CME
CME
CME
1-2
1-3
1-4
1-5
1-6
1-7
1-8
1-9
1-9
Net weight
[kg]
15.0
15.1
15.4
18.2
18.8
18.9
19.5
30.4
31.7

[kg]
[m3]
18.5
18.6
18.9
21.7
22.3
22.4
23.0
33.9
35.2
0.0300
0.0300
0.0400
0.0400
0.0400
0.0400
0.0400
0.0800
0.0800
CME 3-I and CME 3-G

Supply voltage

Pump type
CME
CME
CME
CME
CME
CME
CME
CME
CME
CME
CME
CME
3-2
3-3
3-4
3-5
3-6
3-7
3-8
3-9
3-6
3-7
3-8
3-9
Net weight
[kg]
15.0
17.5
17.8
18.2
29.7
29.7
34.3
34.4
31.0
31.0
31.6
34.6

[kg]
[m3]
18.5
21.0
21.3
21.7
33.2
33.2
37.8
37.9
34.5
34.5
35.1
38.1
0.0300
0.0400
0.0400
0.0400
0.0800
0.0800
0.0800
0.0800
0.0800
0.0800
0.0800
0.0800
CME 5-I and CME 5-G

Supply voltage
Pump type

CME
CME
CME
CME
CME
CME
CME
CME
CME
CME
CME
5-2
5-3
5-4
5-5
5-6
5-7
5-8
5-4
5-5
5-6
5-7
Net weight
[kg]
17.4
17.5
28.7
33.0
33.6
36.9
37.5
30.0
30.3
33.8
33.9

[kg]
[m3]
20.9
21.0
32.2
36.5
37.1
40.4
41.0
33.5
33.8
37.3
37.4
0.0400
0.0400
0.0800
0.0800
0.0800
0.0800
0.0800
0.0800
0.0800
0.0800
0.0800

Net weight
[kg]

[kg]
[m3]
Supply voltage
Pump type

CME 10-1
21.3
24.8
0.0400
CME
CME
CME
CME
CME
CME
CME
CME
36.6
57.9
58.8
60.2
36.7
54.6
55.5
60.6
40.1
61.4
62.3
63.7
40.2
58.1
59.0
64.1
0.0800
0.0800
0.0800
0.0800
0.0800
0.0800
0.0800
0.0800
10-2
10-3
10-4
10-5
10-2
10-3
10-4
10-5
101
CM, CME
23

Supply voltage
Pump type
CME
CME
CME
CME
CME
CME
15-1
15-2
15-3
15-1
15-2
15-3
Net weight
[kg]
36.3
57.6
62.0
36.4
54.3
58.2

[kg]
[m3]
39.8
61.1
65.5
39.9
57.8
61.7
0.0800
0.0800
0.0800
0.0800
0.0800
0.0800

Supply voltage
102
Pump type
CME
CME
CME
CME
25-1
25-2
25-1
25-2
Net weight
[kg]
39.5
61.8
54.1
58.0

[kg]
[m3]
43.0
65.3
57.6
61.5
0.0800
0.0800
0.0800
0.0800
CM, CME
24
Motor data
24. Motor data

P2
[kW]
Frame size
I1/1
[A]
Cos 1/1
[%]
Speed
[min-1]
Istart
[A]
71A
0.3
1.8 - 2.4
0.95 - 0.86
67.4 - 61.4
6.1 - 8.2
2.800 - 2.830
71B
0.5
3.1 - 2.8
0.97 - 0.99
74 - 70
16.4 - 14.8
2.730 - 2.740
80A
0.67
4.4 - 4.0
0.99 - 0.99
71.8 - 73
17.2 - 15.6
2.720 - 2.800
80B
0.9
5.4 - 5.0
0.98 - 0.98
76 - 74
23.2 - 21.5
2.750 - 2.790
90SA
1.3
8.4 - 8.0
0.98 - 0.98
71 - 71
28.6 - 27.2
2.710 - 2.710
90SB
1.9
11.0 - 10.0
0.99 - 0.98
75 - 76
40.7 - 37.0
2.755 - 2.770
Istart
[A]
Speed
[min-1]

Frame size
P2
[kW]
71A
71B
I1/1
[A]
Cos 1/1
[%]
0.46
2.0 - 2.2 / 1.0 - 1.2
0.83 - 0.75
73.4 - 73.6
9.8 - 11.7 / 4.9 - 6.4
2.770 - 2.820
0.65
2.8 - 3.1 / 1.6 - 1.8
0.82 - 0.72
73.9 - 72.9
16.2 - 19.2 / 9.3 - 11.2
2.770 - 2.820
80BA
0.85
3.5 - 3.8 / 2 - 2.22
0.77 - 0.68
79.7 - 79.3
21.0 - 24.3 / 12.0 - 14.2
2.840 - 2.870
80C
1.2
4.8 - 5.2 / 2.8 - 3
0.79 - 0.7
83 - 80.9
37.0 - 41.6 / 21.6 - 24.0
2.820 - 2.860
90SB
1.58
5.55 - 5.38 / 3.25 - 3
0.88 - 0.84
83.4 - 84.3
38.9 - 44.1 / 22.8 - 24.6
2.880 - 2.910
90SC
2.2
8.05 - 7.5 / 4.7 - 4.35
0.83 - 0.75
84.8 - 83.8
71.6 - 76.5 / 41.8 - 44.4
2.890 - 2.920
100LA
3.2
11.8 - 11.0 / 6.75 - 6.40
0.87 - 0.79
85.2 - 85.5
94.4 - 96.8 / 54.0 - 56.3
2.900 - 2.920
100LB
4.0
14.0 - 13.2 / 8.20 - 7.80
0.87 - 0.84
87.1 - 87.9
119.0 - 125.4 / 69.7 - 74.1
2.900 - 2.920
132SB
5.8
20.4 - 19.0 / 11.8 - 11.0
0.89 - 0.84
87.5 - 88.0
181.6 - 184.3 / 105.0 - 106.7
2.900 - 2.980
132SC
7.4
25.5 - 26.5 / 14.8 - 15.4
0.86 - 0.77
88.4 - 88.7
232.1 - 254.4 / 134.7 - 147.8
2.910 - 2.930
Istart
[A]
Speed
[min-1]
Frame
size
P2
Service
factor
I1/1
[A]
Service factor current
Cos 1/1
[%]
[kW]
[hp]
71B
0.60
0.80
4.1
4.1
0.98
71
16.8
3.300
80A
0.84
1.1
5.8
5.8
0.98
69.8
18.6
3.150
80B
1.14
1.5
7.35
7.35
0.99
73.5
19.8
3.270
90SB
1.54
2.0
9.8
9.8
0.98
74.8
37.2
3.330
Cos 1/1
[%]
Istart
[A]
Speed
[min-1]

Frame
size
P2
[kW]
[hp]
Service
factor
I1/1
[A]
71BA
0.60
0.8
7.6 / 3.9
7.6 / 3.9
0.76
69 - 66
19.8 / 10.1
3.240
80AA
0.78
1.06
10.6 / 5.4
10.6 / 5.4
0.65
69 - 68
31.8 / 16.2
3.240
80BA
1.10
1.50
14.0 / 7.0
14.0 / 7.0
0.94
71 - 69
44.8 / 22.4
3.320
90CC
1.50
2.03
19.5 / 9.8
19.5 / 9.8
0.97
72.9 - 69
78.0 / 39.2
3.360
103
CM, CME
24
Motor data
3 x 208-230/440-480 V, 60 Hz (supply voltage E)

P2
Frame
Service
size
[kW] [hp] factor
I1/1
[A]
[%]
Cos 1/1
Istart
[A]
Speed
[min-1]
71AA
0.43 0.58
1.9 - 1.7 / 1.0 - 0.8
1.9 - 1.7 / 1.0 - 0.8
0.85 - 0.81/0.85 - 0.81 76.0 - 78.6
11.2 - 11.1 / 5.9 - 5.2
3.360 - 3.420
71BA
0.74
1.0
3.4 - 3.6 / 1.7 - 1.8
3.4 - 3.6 / 1.7 - 1.8
0.89 - 0.83/0.89 - 0.83 76.0 - 78.4
20.1 - 23.4 / 10.0 - 11.7
3.220 - 3.370
80BA
1.04
1.4
4.1 - 3.95 / 2 - 2
4.1 - 3.95 / 2 - 2
80CB
1.28
1.7
5.1 - 4.9 / 2.48 - 2.46
5.1 - 4.9 / 2.48 - 2.46
90CC
1.7
2.3
90FA
2.5
3.4
8.95 - 8.5 / 4.3 - 4
8.95 - 8.5 / 4.3 - 4
100BB
4.0
5.4
14.8 - 14.2 / 7.2 - 7.0
14.8 - 14.2 / 7.2 - 7.0
132CA
8.4
21 - 20.4 / 10.5 - 10.2
21 - 20.4 / 10.5 - 10.2 0.88 - 0.82/0.88 - 0.82
0.8 - 0.71/0.8 - 0.71
26.7 - 31.6 / 13.0 - 16.0
3.430 - 3.460
0.82 - 0.75/0.82 - 0.79 83.5 - 83.8
34.7 - 37.7 / 16.9 - 18.9
3.420 - 3.460
6.25 - 5.85 / 2.98 - 2.85 6.25 - 5.85 / 2.98 - 2.85 0.83 - 0.84/0.83 - 0.84 85.9 - 85.8
53.1 - 55.0 / 25.3 - 26.8
3.440 - 3.520
81.4 - 89.3 / 39.1 - 42.0
3.490 - 3.520
0.9 - 0.81/0.9 - 0.81
83.6 - 83
86.1 - 86.9
0.86 - 0.80/0.86 - 0.80 88.5 - 89.2 177.6 - 123.5 / 86.4 - 60.9 3.520 - 3.530
89.4 - 89
189.0 - 234.6 / 94.5 - 117.3 3.520 - 3.540
3 x 575 V, 60 Hz (supply voltage H)

P2
Frame
Service
size
[kW] [hp] factor
I1/1
[A]
Cos 1/1
[%]
Istart
[A]
Speed
[min-1]
71AA
0.43 0.58
0.7
0.7
0.84
76.0
4.6
3.340
71BA
0.74
1.0
1.3
1.3
0.84
76
8.5
3.340
80BA
1.04
1.4
1.55
1.55
0.8
85.2
11.8
3.450
80CB
1.28
1.7
1.84
1.84
0.82
85.7
15.3
3.440
90CC
1.7
2.0
2.89
2.89
0.83
85.9
27.7
3.440
90FA
2.5
3.4
3.5
3.5
0.9
85.9
20.7
3.490
100BB
4.0
5.4
5.7
5.7
0.88
88.5
49.6
3.500
132CA
8.2
8.2
0.86
89.2
106.6
3.520
Mains-operated motors, 50/60 Hz

3 x 220-240/380-415 V, 50 Hz; 3 x 220-255/380-440 V, 60 Hz (supply voltage O)
Frame size
71B
80BA
80C
Istart
[A]
Speed
[min-1]
78 - 76
17.0 - 15.0 / 6.5 - 9.0
2.870 - 2.890
75 - 77
17.0 - 17.4 / 8.0 - 10.2
3.280 - 3.350
84 - 80.1
28.8 - 31.4 / 16.5 - 18.1
2.920 - 2.930
P2
[kW]
Frequency
[Hz]
I1/1
[A]
Cos 1/1
[%]
0.43
50
3.4 - 2.5 / 1.3 - 1.5
0.72 - 0.60
0.74
60
3.4 - 2.9 / 1.6 - 1.7
0.87 - 0.84
0.6
50
3 - 3.65 / 1.72 - 2.1
0.63 - 0.5
1.04
60
3.9 - 3.65 / 2.25 - 2.1
0.83 - 0.8
84.1 - 85.5
25.4 - 28.1 / 14.6 - 16.2
3.410 - 3.450
0.74
50
3.65 - 4.5 / 2.1 - 2.5
0.64 - 0.5
84.6 - 81.3
35.0 - 40.5 / 20.2 - 22.5
2.920 - 2.930
1.28
60
4.76 - 4.42 / 2.75 - 2.55
0.84 - 0.8
84.3 - 85.7
31.4 - 34.5 / 18.2 - 19.9
3.400 - 3.440
[%]
Istart
[A]
Speed
[min-1]
3 x 380-415 V, 50 Hz; 3 x 440-480 V, 60 Hz (supply voltage J)

Frame size
71AA
71BA
80BA
80CB
90CC
90FA
100BB
132CA
104
P2
[kW]
Frequency
[Hz]
I1/1
[A]
Cos 1/1
0.25
50
0.55 - 0.65
0.77 - 0.71
77 - 76
4.0 - 5.1
2.870 - 2.890
0.43
60
0.95 - 0.80
0.85 - 0.82
76.0 - 78.6
5.6 - 5.2
3.360 - 3.420
0.43
50
1.4 - 1.5
0.76 - 0.66
77 - 76
7.7 - 9.0
2.860 - 2.890
0.74
60
1.7 - 1.8
0.89 - 0.83
76.0 - 78.4
10.0 - 11.7
3.220 - 3.380
0.6
50
1.55 - 1.75
0.68 - 0.62
83.5 - 82
13.8 - 14.7
2.900 - 2.910
1.04
60
2 - 2.1
0.85 - 0.75
82.5 - 82.9
14.6 - 16.8
3.420 - 3.460
0.74
50
1.95 - 2.1
0.72 - 0.62
85.2 - 84.1
18.1 - 20.4
2.900 - 2.920
1.28
60
2.55 - 2.45
0.82 - 0.76
85.3 - 85.8
19.1 - 21.3
3.440 - 3.470
50
2.25 - 2.3
0.8 - 0.74
83.9 - 82.9
25.2 - 27.8
2.930 - 2.950
1.7
60
2.98 - 2.85
0.88 - 0.84
86.1 - 86.9
25.3 - 26.8
3.490 - 3.510
1.45
50
3 - 3.2
0.83 - 0.81
86.8 - 87
36.0 - 41.6
2.920 - 2.950
2.5
60
4.3 - 4
0.9 - 0.87
86.1 - 86.9
38.7 - 44.0
3.490 - 3.520
2.950 - 2.960
2.36
50
6.0 - 6.5
0.76 - 0.65
88 - 87
72.0 - 87.8
4.0
60
7.3 - 7.5
0.86 - 0.80
88.5 - 89.2
87.6 - 65.3
3.520 - 3.530
3.5
50
7.9 - 8.7
0.76 - 0.64
88.5 - 87
122.5 - 133.5
2.950 - 2.960
60
10.2 - 10.2
0.86 - 0.79
89.3 - 89.1
123.4 - 136.7
3.520 - 3.530
CM, CME
24
Frame size
71AA
71B
80BA
80C
90SB
90LC
100LB
112MC
P2
[kW]
I1/1
[A]
Frequency
[Hz]
Cos 1/1
[%]
Istart
[A]
Motor data

Speed
[min-1]
0.25
50
1.6 / 1.0
0.65
77 - 76
11.7 / 7.3
2.900
0.43
60
2.0 - 1.8 / 1.15 - 1.05
0.85 - 0.8
76.0 - 78.6
11.8 - 11.7 / 6.8 - 6.8
3.370 - 3.424
0.43
50
3.6 / 2.0
0.53
77 - 76
19.8 / 11.0
2.904
0.74
60
3.3 - 3.5 / 2.0 - 2.2
0.83 - 0.76
76 - 78.4
19.5 - 22.8 / 11.8 - 14.3
3.380 - 3.429
0.6
50
3.8 / 2.2
0.56
82.4 - 82.4
35.3 / 20.5
2.930
1.04
60
4.3 - 4.2 / 2.5 - 2.4
0.8 - 0.72
85 - 85
31.0 - 35.3 / 18.0 - 20.2
3.440 - 3.470
0.74
50
4.25 / 2.44
0.61
84 - 84
36.1 / 20.7
2.910
1.28
60
5.7 - 5.2 / 3.3 - 3
0.77 - 0.77
83.8 - 84.1
37.1 - 31.7 / 21.5 - 18.3
3.450 - 3.450
50
5.2 / 3
0.65
83 - 83
65.0 / 37.5
2.950
1.7
60
6.6 - 6.3 / 3.8 - 3.6
0.83 - 0.84
85.9 - 85.8
56.1 - 63.0 / 32.3 - 36.0
3.440 - 3.520
1.45
50
6.5 / 3.8
0.75
86.6 - 86.6
88.4 / 51.7
2.950
2.5
60
9.6 - 8.8 / 5.5 - 5.1
0.9 - 0.88
83.1 - 86.9
74.9 - 84.5 / 42.9 - 49.0
3.480 - 3.500
2.3
50
15.4 / 8.8
0.51
89 - 87
184.8 / 105.6
2.960
4.0
60
15.8 - 15.4 / 9.4 - 8.7
0.86 - 0.79
88.5 - 89.2
189.6 - 134.0 / 112.8 - 75.7
3.510 - 3.530
3.5
50
19 / 11
0.62
88.2 - 88.2
285.0 / 165.0
2.960
6.00
60
22.2 - 21.2 / 12.8 - 12.2
0.86 - 0.79
89.3 - 89
244.2 - 260.8 / 140.8 - 150.1
3.520 - 3.540
Cos 1/1
[%]
Istart
[A]
Speed
[min-1]
3 x 400 V, 50/60 Hz (supply voltage I)

Frame size
71AA
80BA
80CB
90CC
90FA
100BB
132CA
P2
[kW]
Frequency
[Hz]
I1/1
[A]
0.25
50
0.72
0.67
75.0
4.7
2.900
0.43
60
1.0
0.86
74.9
6.5
3.350
2.910
0.6
50
1.9
0.59
81.6
13.5
1.04
60
2.18
0.83
83
13.5
3.400
0.74
50
2.28
0.57
82.4
13.9
2.920
1.28
60
2.65
0.84
83.9
13.8
3.400
1.7
60
3.2
0.87
81.3
23.7
3.510
1.45
50
3.0
0.83
86.8
36.0
2.920
2.5
60
4.65
0.91
85.4
41.9
3.500
2.32
50
5.5
0.7
87
63.3
2.960
60
7.35
0.89
87.6
63.2
3.500
3.5
50
8.8
0.65
88.2
145.2
2.960
60
11.2
0.87
90
172.9
3.520
105
CM, CME
24
Motor data
Speed-controlled motors
P2
[kW]
[hp]
Service
factor
I1/1
[A]
Service factor
current
Cos 1/1
71BA
0.55
0.75
3.9 - 3.5
3.9 - 3.5
0.97
80BA
1.10
1.50
7.5 - 6.8
7.5 - 6.8
0.97
Frame size

P2
[kW]
Frame size
I1/1
[A]
Cos 1/1
71B
0.55
4.30 - 3.6
0.97
80B
1.10
8.20 - 6.80
0.97

Frame size
P2
[kW]
[hp]
Service
factor
I1/1
[A]
Service factor
current
Cos 1/1
90CC
1.50
2.00
1.15
3.1 - 3.1
3.565 - 3.565
0.87
90FA
2.20
3.00
1.15
3.7 - 3.7
4.255 - 4.255
0.91
112CA
4.0
5.5
1.15
6.1 - 6.1
7.015 - 7.015
0.92
132DA
5.5
7.5
1.15
8.9 - 8.9
10.235 - 10.235
0.94
106
Frame size
P2
[kW]
Frequency
[Hz]
Cos 1/1
90SB
1.50
3.3 - 2.7
0.91 - 0.87
90LC
2.20
4.6 - 3.8
0.92 - 0.9
100LC
3.0
6.2 - 5
0.94 - 0.92
112MC
4.0
8.1 - 6.6
0.94 - 0.92
132SC
5.5
11 - 8.8
0.94 - 0.93
132SD
7.5
15 - 12
0.94 - 0.93
CM, CME
24
Single-phase
Three-phase
Electricity supply to pump
1 x 200-240 V - 10 %/+ 10 %, 50/60 Hz, PE.
3 x 380-480 V - 10 %/+ 10 %, 50/60 Hz, PE.
Back-up fuse
Motor sizes of 1.5 to 5.5 kW: Max. 16 A.

Motor sizes of 0.55 to 1.1 kW: Max. 10 A.
Motor size 7.5 kW: Max. 32 A.
Standard as well as quick-blow or slow-blow fuses may be
Standard as well as quick-blow or slow-blow fuses may be
used.
used.
External start/stop input
External potential-free contact.

Maximum contact load: Voltage 5 VDC, current < 5 mA.
Screened cable.*
Digital input
External potential-free contact.

Maximum contact load: Voltage 5 VDC, current < 5 mA.
Screened cable.*
Setpoint signals
Potentiometer
0-10 VDC, 10 k (via internal voltage supply).
Screened cable.*
Maximum cable length: 100 m.
Voltage signal
0-10 VDC, Ri > 50 k.
Tolerance: + 0 %/- 3 % at maximum voltage signal.
Screened cable.*
Current signal
DC 0-20 mA/4-20 mA, Ri = 175 .
Tolerance: + 0 %/- 3 % at maximum current signal.
Screened cable.*
Potentiometer
0-10 VDC, 10 k (via internal voltage supply).
Screened cable.*
Voltage signal
0-10 VDC, Ri > 50 k.
Screened cable.*
Current signal
DC 0-20 mA/4-20 mA, Ri = 250 .
Screened cable.*
Electricity supply to
sensors
The sensors are supplied with electricity via the motor

terminal box.
24 VDC 10 %.
Maximum load: 40 mA.
The sensors are supplied with electricity via the motor

terminal box.
24 VDC 10 %.
Maximum load: 40 mA.
Sensor signals
Voltage signal
0-10 VDC, Ri > 50 k.
Screened cable.*
Current signal
DC 0-20 mA/4-20 mA, Ri = 175 .
Screened cable.*
Voltage signal
0-10 VDC, Ri > 50 k.
Screened cable.*
Current signal
DC 0-20 mA/4-20 mA, Ri = 250 .
Screened cable.*
Signal output
Potential-free changeover contact.

Maximum contact load: 250 VAC, 2 A.
Minimum contact load: 5 VDC, 10 mA.
Screened cable: 0.5 - 2.5 mm2.
Bus input
Grundfos bus protocol, GENIbus protocol, RS-485.

0.5 - 1.5 mm2 screened 2-core cable.
Motor data
Additional data for speed-controlled motors
EN 61800-3
Note: When pumps fitted with 7.5 kW motors are installed in first environment (residential areas), an additional EMC
filter is required to obtain class B, group 1 status.
EMC
Motors of 0.55 to 5.5 kW:

Electromagnetic disturbance first environment (residential areas) unrestricted distribution, corresponding to
CISPR 11, class B, group 1.
Motors of 7.5 kW:
Electromagnetic disturbance first environment (residential areas) restricted distribution.
Immunity to electromagnetic disturbance second environment (industrial areas) unrestricted distribution,
corresponding to CISPR 11, class A, group 1.
Enclosure class
IP55 (IEC 34-5).
Insulation class
F (IEC 85).
Ambient temperature
During operation: -20 C to +40 C.

During storage/transport: -40 C to +60 C.
Relative air humidity
Maximum 95 %.
* Cross section min. 0.5 mm2 and max. 1.5 mm2.
107
CM, CME
25
TM04 5847 4609
Pump type
Motor with multiplug connection

Mains-operated motors fitted with a Harting 10-pin
multiplug connection, HAN 10 ES, enable easy
connection to the mains.
Note: For CME pumps we offer the solutions shown on
page 109.
The purpose of a multiplug connection is to facilitate the
electrical installation and service of the pump.
The multiplug functions as a plug-and-pump device.
CM 1
CM 3
CM 5
CM 10
CM 15
CM 25
TM04 5846 4109

TM02 0470 0700
h1
h2
71
80
90
100
71
80
90
100
112
132
206
206
263
283
231
231
273
283
309
309
237
237
294
314
262
262
304
314
340
340
Plug connections
Figure 32 shows the position of the multiplug on the

mains-operated motor.
Fig. 32 Motor with multiplug connection
Frame size
W2 U2
V2
U1
W1
V1
10
TM01 8702 0700
Motors
Dimensions
Fig. 34 Plug connection from motor
L1
L2
L3
10
TM01 8703 0700
Although the Grundfos CM and CME product range

offers a number of pumps for different applications,
customers require specific pump solutions to satisfy
their needs. Below are the options available for
customising the CM and CME pumps.
Contact Grundfos for further information or for requests
other than the ones mentioned below.
Fig. 35 Plug connection for star connection
L1
L2
L3
10
Fig. 33 Multiplug logo
TM01 8704 0700
Customisation
25. Customisation
Fig. 36 Plug connection for delta connection
Note: Wire bridges for connections are located in the

plug.
108
CM, CME
25
When the cable entry bar is removed, it is possible to

disconnect all electrical connections.
Figure 37 shows the location of the detachable cable
entry bar on the motor terminal box as well as plugs for
mains connection, sensor and communication.
High humidity may cause condensation in the motor.

Slow condensation occurs as a result of a decreasing
ambient temperature; rapid condensation occurs as a
result of shock cooling caused by direct sunlight
followed by rain.
In areas with ambient temperatures below 0 C, it is
advisable always to use motors with anti-condensation
heater.
Note: Rapid condensation is not to be confused with
the phenomenon which occurs when the pressure
inside the motor is lower than the atmospheric
pressure. In such cases, moisture is sucked from the
atmosphere into the motor through bearings, housings,
etc.
Customisation
Plug-and-pump solutions for CME pumps

To facilitate electrical installation and service of our
three-phase CME pumps, all motor terminal boxes are
equipped with a detachable cable entry bar.
In applications with constant humidity levels above

85 %, the drain holes in the drive-end flange must be
open. This changes the enclosure class to IP34.
If IP55 protection is required due to operation in dusty
environments, it is advisable to install a motor with
anti-condensation heater.
TM03 4058 1406
TM03 1964 3405 - TM03 1962 3405
Figure 39 shows a typical circuit of a three-phase motor

with anti-condensation heater.
Fig. 37 Location of the detachable cable entry bar
Motor with anti-condensation heater
Fig. 39 Three-phase motor with anti-condensation heater
TM03 2440 4305
Legend
Fig. 38 Mains-operated motor with anti-condensation

heater
In applications where condensation in the motor may

occur, we recommend to install a motor with an
anti-condensation heater on the stator coil ends.
The heater keeps the motor temperature higher than
the ambient temperature and prevents condensation.
Symbol
Designation
Contactor
Motor
Note: Connect the anti-condensation heater to the

power supply so that it is on when the motor is switched
off.
The following motor sizes are available with
anti-condensation heater:
Motors, 50/60 Hz
Frame size
71/80
90
100
112/132
Power of heating unit

[W]
1 x 24 V
38
2 x 38
1 x 190-250 V
23
31
38
2 x 38
109
CM, CME
25
Customisation
Motors with PTC sensors
Legend
TM02 7038 2403
Symbol
Fig. 40 PTC sensor incorporated in windings
Built-in PTC sensors (thermistors) protect the motor

against overheating. Single-phase motors are
protected against slow and rapid overheating.
Three-phase motors are protected against slow
overheating.
Designation
S1
On/off switch
K1
Contactor
+T
PTC sensor (thermistor) in motor
Motor
3UN2 100-0 C
Tripping unit with automatic resetting
Amplifier
Output relay
H1
LED Ready
H2
LED Tripped
A1, A2
Connection for control voltage
T1, T2
Connection for PTC sensor loop
Motors with thermal switches (PTO)
We offer built-in PTC sensors to protect the motor.
TM02 7042 2403
Three-phase mains-operated motors with supply

voltages F, G and O of 3 kW and up have PTC sensors
as standard (UL-approved motors have no internal
protection).
Note: PTC sensors must be connected to an external
tripping unit connected to the control circuit.
Protection according to IEC 60034-11:
slow and rapid overheating.
PTC sensors comply with DIN 44082. Maximum voltage
at the terminals, Umax = 2.5 VDC. All tripping units
available for DIN 44082 PTC sensors meet this
requirement.
with PTC sensors.
L1 L2 L3 N
95
H1
H2
T1
T2
A2
We offer mains-operated motors with bimetallic thermal

switches in the motor windings.
Three-phase mains-operated motors with supply
voltages F, G and O are available with built-in thermal
switches.
Protection according to IEC 60034-11:
Built-in thermal switches protect the motor against

overheating. Single-phase motors are protected
against slow and rapid overheating. Three-phase
motors are protected against slow overheating.
Note: Thermal switches must be connected to an

external control circuit to protect the motor against slow
overheating. The thermal switches require no tripping
unit.
3UN2 100-0 C
A1
Fig. 42 Thermal switch incorporated in windings
96
98
slow and rapid overheating.

As protection against seizure, the motor must be
connected to a motor-protective circuit breaker.
S1
K1
Thermal switches tolerate the following maximum

loads:
M
3
Fig. 41 Three-phase motor with PTC sensors
110
TM00 3965 1494
K1
Umax
250 VAC
IN
1.5 A
Imax
5.0 A (locked-rotor and breaking current)
CM, CME
25
We especially recommend oversize motors in these
cases:
Customisation

with built-in bimetallic thermal switches.
The pump is installed at an altitude of more than

1000 metres above sea level.
The viscosity or density of the pumped liquid is
higher than that of water.
The ambient temperature exceeds +40 C (CME).
The ambient temperature exceeds +55 C (CM).
It is advisable to use an undersize motor if the operating
conditions do not at all reach the standard conditions.
We especially recommend undersize motors in these
cases:
The viscosity or density of the pumped liquid is
lower than that of water.
TM00 3964 1494
The duty point of the pump is constant, and the flow

rate is significantly lower than the recommended
maximum flow rate.
Fig. 43 Three-phase motor with thermal switches
Terminal box positions

As standard the terminal box is mounted in 12 oclock
position as shown in fig. 44.
CM pumps with motor frame sizes of 71 and 80 are
available with other terminal box positions on special
request.
Legend
12 oclock (standard)
Designation
S1
On/off switch
K1
Contactor
Thermal switch in motor
Motor
MV
Motor-protective circuit breaker
Undersize and oversize motors

The available motor sizes are shown in section
24. Motor data on pages 103 to 106.
9 oclock
(on request)
3 oclock
(on request)
TM04 0357 1008
Symbol
Fig. 44 Terminal box positions of frame sizes 71 and 80
Undersize and oversize motors are defined as the next

kW size below or above the fitted standard motor.
Note: The CM 1, 3 and 5 cannot be combined with
frame sizes 112 and 132.
It is advisable to use an oversize motor if the operating
conditions fall outside the standard conditions.
111
CM, CME
25
Customisation
Options for CME pumps

CME pumps offer a number of advantages, depending
on hardware combinations and software configuration
of the motor. Amongst others, there are various
functional modules available as described below:
Electropolished stainless-steel pumps

Electropolished pumps are often used in the
pharmaceutical industry and in the food and beverage
industry where materials and surface quality must meet
strict requirements to hygiene or corrosion resistance.
Standard module: Simple control of one parameter

(for instance pressure, differential pressure,
temperature, differential temperature or flow rate).
Electropolishing removes burrs as well as metallic and

non-metallic inclusions, providing a smooth, clean and
corrosion-resistant stainless-steel surface.
Advanced module: Same as standard module, but

with additional digital inputs for further control
options.
Multipump module: The module enables parallel
operation of two, three or four identical pumps
without the need for a separate control system.
Only one pressure transmitter is necessary.
All other functions are similar to those of the
standard module.
To meet the strict hygienic requirements to material and

surface quality, we offer electropolished stainless-steel
pumps with the following surface quality:
Pumps
Surface quality: Ra 0.8 m.
Pumping of liquids down to -30 C
Alternative colouring
We offer custom-built pumps in any NCS- or
RAL-specified colour to suit your requirements!
We offer custom-built pumps for the pumping of liquids

down to -30 C. The pumps have an oversize neck ring
ensuring that impellers do not seize up as a result of
thermal expansion.
The used paint is water-based. Painted parts

correspond to corrosion class III.
We offer the above solution for CM and CME in I and G

versions (stainless steel).
All pump types and sizes are available with alternative

colouring.
Surface treatment
Customised nameplate
Cleaned and dried pumps

Cleaned and dried pumps are recommended for use in
applications involving strict demands on cleanliness
and surface quality, such as low content of silicone.
Prior to assembly, all pump parts are cleaned in 60 to
70 C water with a cleaning agent. All pump parts are
then thoroughly rinsed in de-ionised water and dried.
The pump is assembled without any use of silicone
lubricants.
Cleaned and dried pumps are not performance-tested.
112
First, all components are pickled in a mixture of nitric

and hydrofluoric acid. Subsequently, the components
are electropolished in a mixture of sulphuric and
phosphoric acid. Finally, the components are
passivated in nitric acid.
We offer additional customised nameplates attached to

the pump:
A nameplate supplied by you.
A Grundfos nameplate customised in terms of a
specific duty point.
A Grundfos nameplate with a tag number.
Note: The Grundfos standard nameplate is always
fitted to the pump.
CM, CME
25
Customisation
Shaft seal arrangements

The shaft seal is developed with customisation in mind.
Depending on media, you may combine the seal faces
in any way.
Available stationary seal faces: Q, B.
Available rotating seal faces: Q, V.
Rubber: E, V and K.
Note: For further details about seal face material
codes, see Type key on page 10.
Alternative connection positions

The pump is available with various connection
positions on special request. See fig. 45.
On request
On request
TM03 8709 1008
Standard
Fig. 45 Alternative connection positions
Alternative pipe connections

A wide range of pipe connections are available for the
CM and CME pumps:
Tri-Clamp
DIN, JIS, ANSI flange (combi flange)
Victaulic coupling
Whitworth thread Rp
internal NPT thread.
The available pipe connections are shown in fig. 46.
DIN, JIS, ANSI flange
Victaulic coupling
TM04 3937 0409
Tri-Clamp
Fig. 46 Examples of pipe connections
113
CM, CME
26
Accessories
26. Accessories
Pipework connections
Various sets of flanges and couplings are available for pipework connection.
Distance piece
The distance piece is intended for mounting on the discharge port in order to improve the accessibility when connecting
the pump to the piping system.
The distance piece is made of brass.
Pump type
Pipework
connection
Pump
thread
Product number
CM 1
CM 3
CM 5
1"
96587201
TM04 5800 4009
Distance piece
Flange sets for CM(E) (DIN/ANSI/JIS)

All materials in contact with the pumped liquids are made of stainless steel EN 1.4408/AISI 316.
Flange
Pump type
Pipework
connection
L*
[mm]
Flange mounted Flange mounted on
on pump inlet
pump outlet
Rp
CM 1
CM 3
TM04 3867 0309
Pump
thread
96904693
NPT
DN 32
Product
number
96904705
49.0
78.0
Rp
96904696
NPT
96904708
Rp
96904699
TM04 3869 0309
CM 5
TM04 3868 0309
CM 10
DN 40
CM 15
CM 25
44.0
68.0
NPT
96904711
Rp
96904702
DN 50
48.0
68.0
NPT
96904714
* Length from outer edge of flange to pump suction or discharge port.

Note: Please pay attention to the compatibility between pump and flange before ordering. See tables below.
CM pumps compatible with DIN/ANSI/JIS flanges

Pump type
CM 1, 3, 5
CM 10, 15, 25
114
Material version
Cast iron
Stainless steel
Cast iron
Stainless steel
MG71/80 1-ph
MG71/80 3-ph
MG 90 1-ph
MG 90 3-ph
MG 100
MG 112
CM, CME
26
Pump type
Material version
CME 1, 3, 5
CME 10, 15, 25
1)
2)
MGE 71/80
Cast iron
Stainless steel
Cast iron
Stainless steel
MGE 90S
MGE 90L
MGE 100
MGE 112/132
2)
1)
Accessories
CME pumps compatible with DIN/ANSI/JIS flanges
Only 10 mm clearance between flange and terminal box.

Only 9 mm clearance between flange and terminal box.
Counterflanges for CM(E)-A

Counterflanges for CM(E)-A pumps are made of cast iron EN-GJL-200.
A counterflange set consists of one counterflange, one gasket, bolts and nuts.
Counterflange
Pump type
Description
Rated pressure
Pipework
connection
Product number
Threaded
16 bar, EN 1092-2
Rp 1 1/4
00419901
For welding
25 bar, EN 1092-2
32 mm, nominal
00419902
Threaded
16 bar, EN 1092-2
Rp 1 1/2
00429902
Threaded
16 bar, EN 1092-2
Rp 2
00429904
For welding
25 bar, EN 1092-2
40 mm, nominal
00429901
For welding
40 bar, special flange
50 mm, nominal
00429903
Threaded
16 bar, EN 1092-2
Rp 2
00339903
Threaded
Rp 2 1/2
00339904
Threaded
Rp 2 1/2
96509578
For welding
25 bar, EN 1092-2
50 mm, nominal
00339901
For welding
65 mm, nominal
00339902
TM03 0400 3705
19
78
100
140
CM(E) 1-A
CM(E) 3-A
CM(E) 5-A
TM03 0401 3705
19
88
110
150
CM(E) 10-A
TM03 0402 3705
19
102
125
165
102
125
165
TM02 7203 2803
18.5
127
19.5
CM(E) 15-A
CM(E) 25-A
102
125
165
TM03 0402 3705
19
115
CM, CME
26
Accessories
Counterflanges for CM(E)-I/G

Counterflanges for CM(E)-I/G pumps are made of stainless steel EN 1.4401/AISI 316.
A counterflange set consists of one counterflange, one gasket, bolts and nuts.
Counterflange
Pump type
Description
Rated pressure
Pipework
connection
Product number
Threaded
16 bar, EN 1092-2
Rp 1 1/4
00415304
For welding
25 bar, EN 1092-2
32 mm, nominal
00415305
Threaded
16 bar, EN 1092-2
Rp 1 1/2
00425245
Threaded
16 bar, EN 1092-2
Rp 2
96509570
For welding
25 bar, EN 1092-2
40 mm, nominal
00425246
For welding
50 mm, nominal
96509571
Threaded
16 bar, EN 1092-2
Rp 2
00335254
Threaded
Rp 2 1/2
96509575
Threaded
Rp 2 1/2
96509579
For welding
25 bar, EN 1092-2
50 mm, nominal
00335255
For welding
65 mm, nominal
96509573
TM03 0400 3705
19
78
100
140
CM(E) 1-I/G
CM(E) 3-I/G
CM(E) 5-I/G
TM03 0401 3705
19
88
110
150
89
110
150
TM02 7202 2803
18.5
115
21
CM(E) 10-I/G
TM03 0401 3705
19
88
110
150
18.5
TM02 7202 2803
115
21
89
110
150
TM00 0402 3705
19
102
125
165
102
125
165
TM02 7203 2803
18.5
127
19.5
TM03 0402 3705
19
102
125
165
CM(E) 15-I/G
CM(E) 25-I/G
102
125
165
116
TM00 7203 2803
18.5
127
19.5
CM, CME
26
Victaulic connection
Pump type
Pump
thread
CM 1
CM 3
TM04 3865 0309
CM 5
CM 10
CM 15
CM 25
Rp
NPT
Rp
NPT
Rp
NPT
Rp
D
[mm]
L*
[mm]
33.7
48.5
33.7/42.4
48.5
48.3
48.5
60.3
50.1
NPT
Accessories
Victaulic connections for CM(E)

Product
number
96904694
96904706
96904697
96904709
96904700
96904712
96904703
96904715
Length from outer edge of connection to pump suction or discharge port.
Coupling, pipe stub and gasket for Victaulic connections

Parts in contact with the pumped liquid are made of stainless steel EN 1.4401/AISI 316, and rubber.
A Victaulic coupling set consists of two coupling halves (Victaulic, type 77), one gasket, one pipe stub (for welding or
threaded), bolts and nuts.
Coupling and pipe stub
Pump type
Pipe stub
Pipework
connection
Threaded
R1
CM(E) 1
CM(E) 3
CM(E) 5*
For welding
Threaded
Rubber parts
Number of
coupling sets
required
Product
number
EPDM
97575245
FKM
97575246
EPDM
97575247
FKM
97575248
EPDM
00419911
FKM
00419905
EPDM
00419912
FKM
00419904
EPDM
97575249
FKM
97575250
EPDM
97575251
FKM
97575252
EPDM
00339911
FKM
00339918
EPDM
00339910
FKM
00339917
DN 25
R 1 1/4
CM(E) 5**
For welding
Threaded
DN 32
R 1 1/2
CM(E) 10
TM00 3808 1094
For welding
Threaded
DN 40
R2
CM(E) 15
CM(E) 25
For welding
DN 50
For discharge port. Note: Only one coupling set is required for the discharge port.
** For suction port.
117
CM, CME
26
Accessories
Tri-Clamp connections for CM(E)

Tri-Clamp
Pump type
Pump thread
CM 1
CM 3
Rp
NPT
Rp
NPT
Rp
NPT
Rp
TM04 3866 0309
CM 5
CM 10
CM 15
CM 25
NPT
D
[mm]
L*
[mm]
50.4
40.3
50.4
35.3
50.4
37.4
63.9
37.4
Product
number
96904695
96904707
96904698
96904710
96904701
96904713
96904704
96904716
Length from outer edge of Tri-Clamp connection to pump suction or discharge port.
Clamping ring, pipe stub and gasket for Tri-Clamp connections
Pump type
CM(E) 1, 3, 5, 10
CM(E) 15, 25
TM03 4647 2406
Gasket
TM03 4646 2406
Pipe stub
TM03 4645 2406
Clamping ring
Nominal diameter
[mm]
A
[mm]
B
[mm]
A
[mm]
B
[mm]
C
[mm]
D
[mm]
A
[mm]
B
[mm]
38.0
51.0
92.0
104.4
59.5
74.0
21.5
21.5
50.5
64.0
35.6
48.6
38.6
51.6
35.3
48.0
50.5
64.0
The clamping ring is made of stainless steel EN 1.4301/AISI 304.

The pipe stub is made of stainless steel EN 1.4401/AISI 316.
The gasket is made of PTFE or EPDM.
Pump type
CM(E) 1, 3, 5, 10
CM(E) 15, 25
118
Pipework
connection
Connection material
Gasket
Pressure
[bar]
Number of
coupling sets
required
Product
number
Stainless steel
EPDM
PTFE
EPDM
PTFE
16
2
2
2
2
96515374
96515375
96515376
96515377
DN 32
DN 50
CM, CME
26
R100 remote control
Accessories
Potentiometer for CME

The potentiometer is for setpoint setting and start/stop
of the CME pump.
Product
Product number
External potentiometer with cabinet for wall

mounting
625468
GrA5953
CIU communication interface units

for CME
Fig. 48 R100 remote control
GrA6118
Use the R100 for wireless communication with the CME

pump. The communication takes place by means of
infrared light.
Fig. 47 Grundfos CIU communication interface unit
Product
R100
Product number
625333
The CIU units enable communication of operating data,

such as measured values and setpoints, between CME
pumps and a building management system. The CIU
unit incorporates a 24-240 VAC/VDC power supply
module and a CIM module. It can either be mounted on
a DIN rail or on a wall.
We offer the following CIU units:
CIU 100
For communication via LON.
CIU 150
For communication via Profibus DP.
CIU 200
For communication via Modbus RTU.
CIU 250
For communication via GSM.
CIU 270
For communication via Grundfos Remote Management
(GRM).
CIU 300
For communication via BACnet MS/TP.
Unit type
Fieldbus protocol
Product number
CIU
CIU
CIU
CIU
CIU
CIU
LON
Profibus DP
Modbus RTU
GSM
GRM
BACnet MS/TP
96753735
96753081
96753082
96787106
Contact Grundfos
96893769
100
150
200
250
270
300
For further information about data communication via

CIU units and fieldbus protocols, see the CIU
documentation available in WebCAPS.
119
CM, CME
26
Accessories
Sensors for CME

The sensors must be fitted to the pipework with suitable fittings.
Accessory
Type
Supplier
Measuring range
Product number
Flowmeter
SITRANS FM MAGFLO
MAG 5100 W
Siemens
1-5 m3
(DN 25)
ID8285
Flowmeter
SITRANS FM MAGFLO
MAG 5100 W
Siemens
3-10 m3
(DN 40)
ID8286
Flowmeter
SITRANS FM MAGFLO
MAG 5100 W
Siemens
6-30 m3
(DN 65)
ID8287
Flowmeter
SITRANS FM MAGFLO
MAG 5100 W
Siemens
Temperature
Temperature
Temperature
Temperature
sensor
sensor
sensor
sensor
Accessory for temperature sensor.

All with 1/2 RG connection.
TTA (0) 25
TTA (-25) 25
TTA (50) 100
TTA (0) 150
Protecting tube
9 x 50 mm
Protecting tube
9 x 100 mm
Cutting ring bush
Temperature sensor, ambient temperature
WR 52
Differential-temperature sensor
Differential-temperature sensor
ETSD
ETSD
Carlo
Carlo
Carlo
Carlo
20-75 m3
(DN 100)
0 C to +25 C
-25 C to +25 C
+50 C to +100 C
0 C to +150 C
Gavazzi
Gavazzi
Gavazzi
Gavazzi
Carlo Gavazzi
ID8288
96432591
96430194
96432592
96430195
96430201
Carlo Gavazzi
96430202
Carlo Gavazzi
tmg
(Plesner)
Honsberg
Honsberg
96430203
-50 C to +50 C
ID8295
0 C to +20 C
0 C to +50 C
96409362
96409363
Temperature range
Product number
-40 C to +85 C
96428014
96428015
96428016
96428017
96428018
Note: All sensors have 4-20 mA signal output.

Danfoss pressure sensor kits for CME pumps and CM pumps connected to Grundfos CUE
The kit comprises:
Danfoss pressure transmitter, type MBS 3000, with 2 m screened
cable Connection: G 1/2 A (DIN 16288 - B6kt)
5 cable clips (black)
Installation and operating instructions PT (400212)
Pressure range [bar]

0-4
0-6
0-10
0-16
0-25
DPI differential-pressure sensor kit

The kit comprises:
120
1 sensor incl. 0.9 m screened cable (7/16" connections)

1 original DPI bracket (for wall mounting)
1 Grundfos bracket (for mounting on motor)
2 M4 screws for mounting of sensor on bracket
1 M6 screw (self-cutting) for mounting on MGE 90/100
1 M8 screw (self-cutting) for mounting on MGE 112/132
3 capillary tubes (short/long)
2 fittings (1/4" - 7/16")
5 cable clips (black)
Installation and operating instructions (480675)
Service kit instructions
Pressure range [bar]
Product number
0 - 0.6
96611522
0 - 1.0
96611523
0 - 1.6
96611524
0 - 2.5
96611525
0 - 4.0
96611526
0 - 6.0
96611527
0 - 10
96611550
CM, CME
26
Accessories
Tripping conditions
Overload
underload (dry running)
TM03 1471 2205
temperature
Fig. 49 MP 204
missing phase
phase sequence
overvoltage
undervoltage
power factor (cos )
The MP 204 is an electronic motor protector and data

collecting unit. Apart from protecting the motor, it can
also send information to a control unit via GENIbus, like
for instance:
current unbalance.
trip
temperature
warning
overvoltage
energy consumption
undervoltage
input power
power factor (cos )
motor temperature.
run capacitor (single-phase operation)
The MP 204 protects the motor primarily by measuring

the motor current by means of a true RMS
measurement.
starting capacitor (single-phase operation)
Warnings
Overload
underload
loss of communication in network

harmonic distortion.
The pump is protected secondarily by measuring the

temperature with a Tempcon sensor, a Pt100/Pt1000
sensor and a PTC sensor/thermal switch.
Learning function
Phase sequence (three-phase operation)
The MP 204 is designed for single- and three-phase

motors.
starting capacitor (single-phase operation)
Note: The MP 204 must not be used together with

frequency converters.
run capacitor (single-phase operation)

identification and measurement of Pt100/Pt1000
sensor circuit.
Product number
Features
Phase-sequence monitoring
Description
Product number
indication of current or temperature
input for PTC sensor/thermal switch
Cover for CM motor
indication of temperature in C or F
The cover protects the motor from ingress of liquid,

especially if the pump is installed in a vertically tilted
position with the motor end pointing upwards.
setting and status reading with the Grundfos R100

remote control
setting and status reading via the Grundfos
GENIbus fieldbus.
Product number
Description
Cover for CM motors, frame sizes 71 and 80
Product number
97528743
Angled cable gland
TM05 0729 1411
4-digit, 7-segment display
96079927
Fig. 50 Angled cable gland with O-ring and lock nut

Description
Angled cable gland with O-ring and lock nut
Product number
97842998
121
CM, CME
27
Further product documentation
27. Further product documentation

WebCAPS
WebCAPS is a Web-based Computer Aided Product

Selection program available on www.grundfos.com.
WebCAPS contains detailed information on more than
220,000 Grundfos products in more than
30 languages.
Information in WebCAPS is divided into six sections:
Catalogue
Literature
Service
Sizing
Replacement
CAD drawings.
Catalogue
Based on fields of application and pump types, this section
contains the following:
technical data
curves (QH, Eta, P1, P2, etc.) which can be adapted to the
density and viscosity of the pumped liquid and show the
number of pumps in operation
product photos
dimensional drawings
wiring diagrams
quotation texts, etc.
Literature
This section contains all the latest documents of a given pump,
such as
data booklets
installation and operating instructions
service documentation, such as Service kit catalogue and
Service kit instructions
quick guides
product brochures.
Service
This section contains an easy-to-use interactive service
catalogue. Here you can find and identify service parts of both
existing and discontinued Grundfos pumps.
Furthermore, the section contains service videos showing you
how to replace service parts.
122
CM, CME
Sizing
Further product documentation
27
1
This section is based on different fields of application and

installation examples and gives easy step-by-step instructions in
how to size a product:
Select the most suitable and efficient pump for your installation
Carry out advanced calculations based on energy
consumption, payback periods, load profiles, life cycle costs,
etc.
Analyse your selected pump via the built-in life cycle cost tool
Determine the flow velocity in wastewater applications, etc.
Replacement
In this section you find a guide to selecting and comparing
replacement data of an installed pump in order to replace the
pump with a more efficient Grundfos pump.
The section contains replacement data of a wide range of pumps
produced by other manufacturers than Grundfos.
Based on an easy step-by-step guide, you can compare
Grundfos pumps with the one you have installed on your site.
When you have specified the installed pump, the guide will
suggest a number of Grundfos pumps which can improve both
comfort and efficiency.
CAD drawings
In this section, it is possible to download 2-dimensional (2D) and
3-dimensional (3D) CAD drawings of most Grundfos pumps.
These formats are available in WebCAPS:
2-dimensional drawings:
.dxf, wireframe drawings
.dwg, wireframe drawings.
3-dimensional drawings:
.dwg, wireframe drawings (without surfaces)
.stp, solid drawings (with surfaces)
.eprt, E-drawings.
WinCAPS
WinCAPS is a Windows-based Computer Aided

Product Selection program containing detailed
information on more than 220,000 Grundfos products
in more than 30 languages.
The program contains the same features and functions
as WebCAPS, but is an ideal solution if no internet
connection is available.
WinCAPS is available on CD-ROM and updated once
a year.
Fig. 51 WinCAPS CD-ROM
Subject to alterations.
123
Being responsible is our foundation

Thinking ahead makes it possible
Innovation is the essence
96903467 1011
Repl. 96903467 0811
GB
ECM: 1083776
GRUNDFOS A/S . DK-8850 Bjerringbro . Denmark

Telephone: +45 87 50 14 00
www.grundfos.com
The name Grundfos, the Grundfos logo, and the payoff BeThinkInnovate are registrated trademarks
owned by Grundfos Management A/S or Grundfos A/S, Denmark. All rights reserved worldwide.

Grundfosliterature 1663886

Uploaded by

Copyright:

Available Formats

Grundfosliterature 1663886

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Grundfosliterature 1663886

Uploaded by

Copyright:

Available Formats

GRUNDFOS DATA BOOKLET

Features and benefits

List of pumped liquids

18. Performance curves, CM 60 Hz

19. Performance curves, CME 50/60 Hz

11. CME pumps

12. Grundfos CUE

13. Approvals and markings

16. How to read the curve charts

17. Performance curves, CM 50 Hz

21. Dimensions, CM 60 Hz and 50/60 Hz

22. Dimensions, CME 60 Hz and 50/60 Hz

24. Motor data

27. Further product documentation

23. Weights and shipping volume

The Grundfos CM and CME pumps are

The CM and CME pumps are available in these three

TM05 1128 2211 - TM05 1129 2211

The CM pumps are unique products that have been

Selecting a CME pump

controlled operation, i.e. consumption fluctuates

TM05 1126 2211 - TM05 1122 2211

communication with the pump.

Grundfos CME pumps

The CME pumps are built on the basis of CM pumps.

ISO 9906 Annex A

We the undersigned hereby guarantee and certify that the mate

Pages 35 and 113

Pages 103 to 107

Pages 114 to 121

Pages 122 and 123

The CM and CME pumps are designed to cover a wide

Some of the most typical applications are mentioned

Washing and cleaning

In water treatment plants, the water undergoes a

Washing and cleaning

CM and CME pumps can be used in washing and

units for CIP (Cleaning In Place).

Temperature control involves applications where the

The CM and CME pumps can for example be used in

We provide solutions for applications involving pumping

Pumping of high-temperature liquids

To ensure safe and reliable operation in applications

In pressure-boosting applications, the pumped liquid

CM and CME pumps

CM and CME pumps present the following features and

Various certificates covering worldwide usage are

Electrocoated cast-iron parts

Better efficiency because of smooth surfaces.

high wear resistance and long operating life

Features and benefits

TM04 3509 4508 - TM04 3511 4508

4. Features and benefits

Easy installation and commissioning

Grundfos motors are available with integrated

TM05 0870 1811

An installation indicator is fitted on three-phase

Rated flow rate

Oversize motor (one flange size larger)