SGT-600 Industrial Gas Turbine

Power Generation: (ISO) 24.77 MW(e) The SGT-600 is the most efficient and environmentally friendly industrial gas turbine in its power range. The robustness of the industrial design ensures high reliability and availability in all environments and applications.

The Siemens SGT-600 is a heavy-duty industrial gas turbine designed and built to meet requirements for low life-cycle cost, i.e. low first cost, low fuel costs and low costs for operation and maintenance. Low fuel consumption, even at part loads, and short installation and commissioning times are major features of this turbine. In cogeneration and combined-cycle applications, the high exhaust temperature of the gas turbine makes it one of the most efficient units on the market. The SGT-600 is even able to perform durably in aggressive industrial environments under really tough operating conditions, whether onshore or offshore, in arctic or desert climate.

The outstanding reliability of the SGT-600 makes it ideal for interdependent multiunit applications. A single-lift power generation module for floating platforms such as FPSO (Floating Production, Storage and Offloading) and semi-submersibles is available for both the SGT-600 and the SGT-700. The SGT-600 uses a Dry Low Emission (DLE) system maintaining low specific fuel consumption in all applications. The system is both stable and reliable, not requiring frequent recalibration, and coping easily with load changes, planned or otherwise.

Industrial Gas Turbines

Answers for energy.

SGT-600 Industrial Gas Turbine

SGT-600 gas generator.

Technical specifications
Overview Power generation: 24.77 MW(e) Frequency: 50/60 Hz Electrical efficiency: 34.2 % Heat rate: 10,533 kJ/kWh (9,983 Btu/kWh) Turbine speed: 7,700 rpm Compressor pressure ratio: 14:1 Exhaust gas flow: 80.4 kg/s (177.3 lb/s) Exhaust temperature: 543 C (1,009 F) NO x emissions (with DLE corrected to 15 % O 2 dry) - Gas fuel: 25 ppmV - Liquid fuel: 42 ppmV (wet) Axial Compressor 10-stage axial flow compressor - 2 stages variable guide vanes Electron-beam-welded rotor Combustion 18 dual-fuel 2nd generation Dry Low Emissions (DLE) burners Welded annular sheet metal design Emissions control DLE combustion system Water injection for NO x -reduction during liquid fuel operation in DLE combustor Compressor Turbine 2-stage axial-flow compressor turbine - Both stages are air-cooled Power Turbine 2-stage free power turbine, uncooled Interlocking shrouds Bearings Tilting pad radial and thrust Vibration- and temperaturemonitoring Fuel System Natural gas - Liquid fuel - Dual fuel Fuel-changeover capability at full and part load Gas-supply pressure requirement: 24.5 bar(a) 0.5 bar (3557 psi(a)) Gearbox 50 or 60 Hz Generator Four-pole design Rated voltage: 10.5/11.0/13.8 kV 50 or 60 Hz Protection IP54 PMG for excitation power supply Complies with -IEC/EN 6034-1 standard Lubrication Lubricating oil tank located in package base frame Two main lube oil circuits, low pressure and high pressure 3 x 50 % HP and 3 x 50 % LP AC-driven lube oil pumps with DC backup Starting Electric VSD start-motor Control System Siemens Simatic S7 Distributed inputs/outputs

Gas turbine:
Key features Robust industrial design Low fuel consumption, high efficiency Excellent DLE experience Low emissions DLE 25 ppm NO x Low life-cycle cost Workshop tested Excellent operational availability and reliability Load rejection capability Highly reliable, clean and efficient power generation Maintenance On-site maintenance or 24-hour exchange of gas generator No need for special workshop maintenance Modular build-up for easy maintenance on site Standardized concepts for maintenance planning Overhaul intervals of 40,000 hours Extended time between overhaul when running on part load Condition-based maintenance Horizontal split compressor casing Low deterioration and service cost

Two multi-unit deliveries of SGT-600 gas turbines power this cement factory near Riyadh, Saudi Arabia.

On Torrens Island, Australia, four SGT-600 gas turbines provide seasonal peaking support for the electrical grid.

Package:
Key features Compact layout Low life-cycle cost Short delivery time Same footprint as the SGT-700 gas turbine Fast and easy installation Major components delivered on a common base frame High availability/reliability for complete package

Customer Support:
Key features Global support network of Authorized Service Centers Emergency service 24/7 specialist helpdesk Full field service Full diagnostic support, remote monitoring OEM modernizations and upgrades In-house or on-site training programs Range of maintenance and service contracts available

Height to top of package: 11.9 m

Wi (dr dth: ive 4.1 r, g m en / 4.6 era m tor )

Ga

e pa s turbin

le ckage

ngth:

18.7 m

SGT-600 standard package 1 Combustion air inlet 2 Enclosure air inlet 3 Lube oil system 4 Combustion exhaust 5 Enclosure air outlet 6 Core engine 7 Speed reduction gear 8 AC generator

Height: 7.8 m

SGT-600 Performance
Nominal generator output and heat rate
30 Generator output 11,6

Conditions/assumptions: Fuel: Natural Gas LHV, 46,798 kJ/kg (20,118 Btu/lb) Altitude: Sea level Ambient pressure: 1,013 bar(a) (14.7 psi(a)) Relative humidity: 60 % Inlet pressure loss: 5 mbar (2 H 2 O Outlet pressure loss: 5 mbar (2 H 2 O) Fuel temperature: 5 C (41 F) Diagram conversion factors: To convert To Multiply by C F ( Cx9/5)+32 MJ/kWh Btu/kWh 949

26 Generator output, MW

11,4 Heat rate, MJ / kWh

22

11,2

18

11

14

Heat rate

10,8

10 -40

10,6 -30 -20 -10 0 10 20 30 40

Compressor inlet air temperature, C

Nominal exhaust mass flow and temperature

Conditions/assumptions: Fuel: Natural Gas LHV, 46,798 kJ/kg (20,118 Btu/lb) Altitude: Sea level Ambient pressure: 1,013 bar(a) (14.7 psi(a)) Relative humidity: 60 % Inlet pressure loss: 5 mbar (2 H 2 O) Outlet pressure loss: 5 mbar (2 H 2 O) Fuel temperature: 5 C (41 F) Diagram conversion factors: To convert To Multiply by C F ( Cx9/5)+32

80

550

70

540

60

Exhaust temperature

530

50

520

40 -40

510 -30 -20 -10 0 10 20 30 40

Compressor inlet air temperature, C

Exhaust temperature, C

Exhaust mass flow, kg/s

Unfired heat-recovery steam generation

Conditions/assumptions:
16 Steam flow, kg/s 200 C 14 250 C 300 C 350 C 400 C 12 450 C 500 C Saturated steam

10

Fuel: Natural Gas LHV, 46,798 kJ/kg (20,118 Btu/lb) Altitude: Sea level Ambient pressure: 1,013 bar(a) (14.7 psi(a)) Ambient temperature: 15 C (59 F) Relative humidity: 60 % Boiler pinch point: 8 C (14 F) Boiler approach point: 5 C (9 F) Inlet pressure loss: 5 mbar (2 H 2 O) Outlet pressure loss: 25 mbar (10 H 2 O) Diagram conversion factors: To convert To Multiply by C F ( Cx9/5)+32 kg/s lb/s 2.2046 bar psi 14.5
All rights reserved. Trademarks mentioned in this document are the property of Siemens AG, its affiliates, or their respective owners. Subject to change without prior notice. The information in this document contains general descriptions of the technical options available, which may not apply in all cases. The required technical options should therefore be specified in the contract.

8 0 10 20 30 40 50 60 70 80

Steam pressure, bar (a)

Published by and copyright 2010: Siemens AG Energy Sector Freyeslebenstrasse 1 91058 Erlangen, Germany Siemens AG Energy Sector Oil & Gas Division Wolfgang-Reuter-Platz 47053 Duisburg, Germany

Siemens Energy, Inc. 10730 Telge Road Houston, Texas 77095, USA Siemens Industrial Turbomachinery AB SE-612 83 Finspong, Sweden

For more information, please contact our Customer Support Center. Tel: +49 180 524 70 00 Fax: +49 180 524 24 71 (Charges depending on provider) E-mail: support.energy@siemens.com Oil & Gas Division Order No. E50001-W430-A109-X-4A00 Printed in Germany Dispo 34806, c4bs No. 7447, P WS 03103.

www.siemens.com / energy