BRIGHT LED ELECTRONICS CORP.

Specification for Approval

SAMPLES
● DEVICE NUMBER: BL-B5141-L
ATTACHED AREA
● CUSTOMER:

PAGE
1 2 3 4 CONTENTS
DATE
2014/5/23 1.0 1.0 1.0 1.0 Original Released
2016/9/19 1.1 1.1 1.1 1.1 New Version

FOR CUSTOMER’S APPROVAL STAMP OR SIGNATURE

APPROVED PURCHASE MANUFACTURE QUALITY ENGINEERING

佰鴻工業股份有限公司 ISSUED APPROVED PREPARED

BRIGHT LED ELECTRONICS CORP.
新北市板橋區和平路 19 號 3 樓 張 毛 鍾
3F., No.19, He Ping Road, 2016.09.19 2016.09.19 2016.09.19
Ban Qiao Dist., New Taipei City,
Taiwan
孝 嚴 曉 峰 鵬
Tel: +886-2-29591090
Fax: +886-2-29547006/29558809
www.brtled.com
 BRIGHT LED ELECTRONICS CORP.
BL-B5141-L

● Features: ● Package dimensions:

1. Chip material: GaP/GaP
2. Emitted color : Bright Red
3.80(.150)
3. Lens Appearance : Red Diffused
4. Low power consumption.
3.00(.118)

5. High efficiency.
6. Versatile mounting on P.C. Board or panel.
5.30(.209)
7. Low current requirement. 0.81(.032)

8. 3mm diameter package.

1.5(.059)
9. This product don’t contained restriction MAX.

substance, compliance RoHS standard. 25.4(1.00) MIN.

Cathode
0.5(.02)
SQ.TYP.

● Applications:
1.00(.039) MIN.
1. TV set 2.54(.100)
NOM.
2. Monitor
3. Telephone Notes:
4. Computer 1. All dimensions are in millimeters (inches).
5. Circuit board 2. Tolerance is ±0.25mm (0.01”) unless otherwise specified.
3. Lead spacing is measured where the leads emerge from
the package.
4. Specifications are subject to change without notice.

● Absolute maximum ratings(Ta=25℃)

Parameter Symbol Rating Unit

Power Dissipation Pd 80 mW

Forward Current IF 30 mA

Peak Forward Current*1 IFP 50 mA

Reverse Voltage VR 5 V

Operating Temperature Topr -40℃~85℃

Storage Temperature Tstg -40℃~85℃

*1Condition for IFP is pulse of 1/10 duty and 0.1msec width.

Ver.1.1 Page: 1 of 4
 BRIGHT LED ELECTRONICS CORP.
BL-B5141-L

● Electrical and optical characteristics(Ta=25℃)

Parameter Symbol Condition Min. Typ. Max. Unit
Forward Voltage VF IF=2mA - 1.8 2.2 V
Luminous Intensity Iv IF=2mA - 0.3 - mcd
Reverse Current IR VR=5V - - 100 µA
Peak Wave Length λp IF=2mA - 700 - nm
Dominant Wave Length λd IF=2mA 650 nm
Spectral Line Half-width ∆λ IF=2mA - 100 - nm
Viewing Angle 2θ1/2 IF=2mA - 35 - deg

● Typical electro-optical characteristics curves

Fig.1 Relative intensity vs. Wavelength Fig.2 Forward current derating curve
50
vs. Ambient temperature
1.0
Relative radiant intensity

Forward current(mA) 40

30
0.5
20

10

0 0
600 700 800 20 40 60 80 100
Wavelength λ(nm) Ambient temperature Ta(℃)

Fig.3 Forward current vs. Forward voltage Fig.4 Relative luminous intensity
vs. Ambient temperature
50 3.0
Relative luminous intensity
Forward current(mA)

2.5
40

2.0
30
1.5
20
1.0

10
0.5

0 0
1 2 3 4 5 -40 -20 0 20 40 60
Forward voltage(V) Ambient temperature Ta(℃)

Fig.5 Relative luminous intensity Fig.6 Radiation diagram

vs. Forward current 0 10 20
2.0
Relative luminous intensity(@20mA)

30
Relative radiant intensity

1.5
1.0 40

1.0 0.9 50

0.8 60
0.5 70
0.7 80
90
0
10 20 30 40 50 0.5 0.3 0.1 0.2 0.4 0.6
Forward current (mA)

Ver.1.1 Page: 2 of 4
 BRIGHT LED ELECTRONICS CORP.
BL-B5141-L
● Reliability Test
Classification Test Item Reference Standard Test Conditions Result
Operation Life MIL-STD-750:1026 IF=20mA
MIL-STD-883:1005 Ta=+25℃±5℃ 0/32
JIS-C-7021 :B-1 Test time=1,000hrs
High Ta=+85℃±5℃
Temperature MIL-STD-202:103B RH=90%-95%
0/32
High Humidity JIS-C-7021 :B-11 Test time=240hrs
Endurance
Storage
Test
High High Ta=+85℃±5℃
MIL-STD-883:1008
Temperature Test time=1,000hrs 0/32
JIS-C-7021 :B-10
Storage
Low Low Ta=-45℃±5℃
Temperature JIS-C-7021 :B-12 Test time=1,000hrs 0/32
Storage
Temperature MIL-STD-202:107D Ta﹕ +85℃(30min) ~ +25℃(5min) ~
Cycling MIL-STD-750:1051 -45℃(30min) ~ +25℃(5min)
0/32
MIL-STD-883:1010 Test Time ﹕70min/ctcle 10cycle
JIS-C-7021 :A-4
Thermal Shock MIL-STD-202:107D -45℃±5℃ ~+85℃±5℃
MIL-STD-750:1051 20min 20min 0/32
MIL-STD-883:1011 Test Time=10cycle
Environmental
Solder Preheating：
Test MIL-STD-202:201A
Resistance 120℃,within 120-180 sec.
MIL-STD-750:2031 0/32
Operation heating：
JIS-C-7021 :A-1
255℃±5℃within 5 sec.260℃ (Max)
Solderability MIL-STD-202F:208D T.sol=230±5℃
MIL-STD-750D:2026 Dwell Time=5±1secs
0/32
MIL-STD-883D:2003
JIS C 7021:A-2

● Judgment criteria of failure for the reliability

Measuring items Symbol Measuring conditions Judgment criteria for failure
Forward voltage VF (V) IF=20mA Over U1x1.2
Reverse current IR (uA) VR=5V Over U1x2
Luminous intensity Iv ( mcd) IF=20mA Below S1X0.5

Note: 1. U means the upper limit of specified characteristics. S means initial value.
2. Measurment shall be taken between 2 hours and after the test pieces have been returned to normal
ambient conditions after completion of each test.

Ver.1.1 Page: 3 of 4
 BRIGHT LED ELECTRONICS CORP.
BL-B5141-L

●Dip Soldering

300
Max:260℃,5sec.
250
TEMPERATURE( °C)

Suggest:2~3sec.
200

150

100 Fluxing

50 Preheat
30

10 20 30 40 50 60 70 80 90 100 110 120

TIME(sec.)

1. Please avoid any external stress applied to the lead-frames and

epoxy while the LEDs are at high temperature,especially during soldering
2. DIP soldering and hand soldering should not be done more than one time.
3. After soldering, avoid the epoxy lens from mechanical shock or
vibration until the LEDs are back to room temerature.
4. Avoid rapid cooling during temperature ramp-down process
5. Although the soldering condition is recommended above,
soldering at the lowest possible temperature is feasible for the LEDs

● IRON Soldering

A：Max：350℃ Within 3 sec. One time only.

B：The products of 3mm without flange, welding condition of flat plate PCB Max：350℃
Within 2 sec. One time only 3.0(.118)

PCB

Ver.1.1 Page: 4 of 4