New Muna Saudi - CV 2023
New Muna Saudi - CV 2023
New Muna Saudi - CV 2023
OBJECTIVE
Aspiring for the challenging opportunity wherein my qualification and acquired skills are put
to best use providing me with an opportunity to grow professionally to my full potential and
contribute significantly to the organization.
EXPERIENCE
• Operated and maintained Power transformers of rating 110/11KV 12.5MVA & 110/33KV 16MVA
• Operated and Maintained Current transformers, Potential transformers, Lightning arresters, Circuit
breakers (SF6, VCB), Bus isolator and Bus couplers.
• Testing and maintenance of various Relays in C&R panels of 110KV, 33KV Transformers and
11KV feeder panels.
• Supervised periodic maintenance and testing of power equipment if any abnormal situation has
happened.
• Assisted AE/SE of substation for testing IR of UG cables, wires and WR of tripping coil, closing coil
and windings of CT, PT while commissioning or any faulty condition has happened.
• Installation, manufacture and repair of Servo Voltage Stabilizer.
• Performed daily testing of 110V DC battery charger and check cell voltage and specific gravity of
electrolyte and record it.
• Installed 55, 2V 200Ah Exide made lead acid cells and 110V DC station charger
• Annual maintenance of station battery system.
• Supervised all yard maintenance and activities performed in a live transformer bay.
• Performed electrical construction for multiple multistory domestic buildings and industrial
buildings.
• Supported the supervisors/subcontractors throughout the phase of electrical work.
• Developed project schedules, deliverable plan, material and resources needed under the
supervision of team leader.
• Calculation of connected load, maximum demand, wire/cable size, rating of protective devices,
grounding.
• As per calculation supply voltage selection, material selection and purchase, material inspection,
storing.
• Managed all on-site activities including testing and acceptance, troubleshooting and maintenance
action.
• Supervised, helped for concealed piping, trunking, wire pulling, DB scheduling, earthing, UG
cable termination (indoor, outdoor), cable ducting, glanding, LT and HT panel installation,
maintenance.
• Installed UPS for domestical buildings and small industries.
• Comprehend customer requirements and make appropriate recommendations/briefings during
site activities.
• Detailing of SLD (single line diagram) and explain to workers.
• Performed final testing include insulation resistance test (IR).
• Periodic inspection on industries like mills and maintained LT panels, motor starters (DOL, STAR-
DELTA).
• Induction motor overhauling includes motor decommission, visual inspection, insulation.
resistance test, winding resistance test, visual examination, changing of ball bearings, final test
run, motor installing.
ELECTROMATION TECHNOLOGY, HYDERABAD, INDIA
Feb 2019 – Jun 2019
Trainee Electrical Engineer
• Ladder logic programming for different PLCs. (Siemens, Sneider, Delta, Mitsubishi, Allen Bradley).
• Motor speed control using VFD and commanding by PLC. (ABB, Delta, Danfoss, Sneider, Allen Bradley.
• SCADA design.
• Trouble shooting and maintenance of PLC and Various LT ,HT panels.( MCC, PCC, APFC, DB,
MDB, SMDB, ATS, AMF).
• PLC control wiring, actuator power wiring etc.
• Starter panel assembly using contactors, timers and relays.
EDUCATION
▪ B-Tech (Electrical and Electronics Engineering WITH AGGREGATE OF 8.59)
▪ GURUNANAK INSTITUTION TECHNICAL CAMPUS ( JNTUH, HYDERABAD) 2016-2020
▪ INTERMEDIATE ( D.A.V RB KEDIA +2SCIENCE, BIRGUNG WITH AGGREGATE OF 71.1%)
2014-2016
▪ S.L.C(ALPINE SECONDARY SCHOOL, BIRGUNJ WITH 81.38%) 2014
PERSONAL DETAILS
Date of birth : 15th June 1999
Gender : Male
Languages : English (Fluent),
Nepali, Arabic,urdu.
Nationality : Nepali
Passport number :10943498
Visa status:Transferable with NOC