Resume
Resume
Resume
PROFESSIONAL
SIEMENS LLC, DUBAI Feb 08 – Present
EXPERIENCE
Building Automation & Control (BAC) Division
(The Building Automation and Controls Division represent Siemens Building
Technologies AG (SBT), Switzerland.)
• Understood the all type of drawings related to BAS & related HVAC
Projects.
• Carried out panel wiring, termination of panel & field devices.
• Modified panel wiring according to the requirement & field condition.
• Coordinated with the HVAC & MEP experts for installing location of
field devices & specified the number of cables for those devices
• Programmed & Installed different types of BMS controllers &
configuring the Invensys routers, ILON etc
• Carried out Pre–commissioning & Commissioning tests on
automation control of HVAC units like FCUS, VAVS, AHUS, VFDS,
IGVS, CHILLERS, HEATERS, DUCT HEATERAS, EFS, SAFS, PFS,
HRUS, ELEVATORS, ELECTRICAL, PLUMBING, FIRE FITTING etc
• Commissioned & calibrated all type of field devices.
• Established & modified communication system for BAS.
• Provided technical support to the front end software like tagging,
graphics etc
• Attended safety meetings & trainings.
Projects Handled :
Technical Supervisor
Projects Handled:
Achievements:
• Demonstrated quick learning ability and gained trust of senior technical
team during training and was later given responsibility to lead two projects
• Showed ability to develop thorough and achievable plans, assign resources and
track details to ensure projects were, brought to completion
• Built strong professional relationships with some of the Middle East’s
renowned HVAC Engineering Consultant Group, Al-Mulla Group and
Siemens LLC.
Company Profile:
This company is a private limited company which manufactures
panel boards, MCCBS which mainly used in power generating stations
substations etc. (high voltage) main client is N.T.P.C
Training & job profile
• Got training in tray section & panel board section.
• Got training in industrial safety measures, evacuation
procedures in emergency & first aid.
• Taking assignment from plant engineer.
• Understanding panel layout & circuit drawings.
• Installing all type of electrical components according to the
component description & rating.
• Panel wiring like breaker, ct, relay, control bus bar etc.
• Reporting to the plant engineer & handover to the QC & QA
section.
• Clearing the snag lists.
S.S.L.C. April95
S.N.V. High School, Karkala, Karnataka, India.
Result : 63.8%
COMPUTER SKILLS • Desigo Toolset ver2.36 & 2.37 (Siemens) - System design & PX design
• Desigo RXT ver2.36 & 2.37 (Siemens) for Lon mark controllers
• Siebe Environmental Controls - Micro smart Control Network (MCN)
and Micro Net 2000.
• Wonder Ware Invensys System- Invue, Intouch front-end Lon, Works &
Workplace Ver.4.0 & 5.2 Satchwell, Etc.
• Echelons, network interfaces- Diagnose and configure Lon Work’s
network interfaces, routers, and devices.
• TAC Control’s - Tac Vista, Tac Manta.
• Maintenance Software Faciliworks 5.
• AutoCAD 2004 (Diploma in Electrical CADD)
• C, C++, VB.
• Swift Net Weaver
• MS Office ( MS Word , MS Excel, MS PowerPoint)
• Ms - Dos
Further
Available Upon Request
Referees: