Connector Accessories

AC ACC11 1211

ACCESSORY
I ntroduction & Page Contents

Introduction
Amphenol India is a leading Designer, Manufacturer and Marketer of
Interconnection solutions since 1971. Amphenol is the first Company
in India who started manufacturing high performance connectors.
These expertise and capabilities enables us to turn your
interconnection problems to solutions.

Amphenol Protective caps are developed for environmental

protection needs of Circular connectors in Threaded & Bayonet
versions. These are designed to meet the requirements of military
standards.

We also offer dummy storage receptacle to secure your cable

harness when not in functional use.
This catalogue describes the standard and special purpose designs
used in Military and Industrial Circular connectors.

Page
MIL-C-26482 (MS3180 & MS181) Caps 1-2

MIL-DTL-38999 Series I (MS27501 & MS27502) Caps 3-4

MIL-DTL-38999 Series II (MS27510 & MS27511) Caps 5-6
MIL-DTL-38999 Series III (D38999/32 & D38999/33) Caps 7-8
MIL-DTL-5015 Reverse Bayonet Caps (97B-25042 & 97B-25043) Caps 9

MIL-DTL-5015 Threaded Caps (MS25042 & MS25043) Caps 10

MIL-C-10544 Audio Connector Caps for 10 Pin Caps 11

MIL-C-55116 Audio Connector Caps for 5 & 6 Pin Caps 12

MIL-DTL-22992 Caps 13

MIL-C-26482 & MIL-DTL-5015 Dummy Receptacle 14-16

MIL-DTL-38999 Series III Dummy Receptacle 16

Insertion & Removal Tool 17

Backshell for MIL-DTL-24308 18

Square Flange Gaskets for (MIL-C-26482 & MIL-DTL-5015) 19

 M IL 26482 Protective Caps MS3180 & MS3181 QPL Approved

‘x’ Ordering Information (MIL Part Number)

1.19 max.

JANMS3180 10 C W L

‘A’
‘A’
Designates Plug Dust Cover

Shell Size: 08, 10,12, 14, 16, 18, 20, 22 & 24

(STD Length)
(STD Length)
Style:
‘Z’
‘F’ max. C - With Chain
‘L’
After Knurling R - With SS Rope

‘H’

‘H’
Class:
A - Hard Anodize black finish
W - Cadmium plate finish
4.40/4.50
Length:
4.00 L - 127.0 + 12.7/-6.35 chain/rope in lieu of std. length
With With
chain S.S. Rope Note: For non. std. long “L” Contact factory
(C) (R)

‘X’
1.19 max.
Ordering Information (Proprietary Part Number)
IMB3180 08 A F N H
Designates Plug Dust Cover
‘A’

Shell Size: 08, 10,12, 14, 16, 18, 20, 22 & 24

(STD Length)

(STD Length)

‘Z’ Class: Aluminium

‘F’ max. ‘L’ A - Hard anodic
‘H’
‘H’

After Knurling B - Zinc nickel finish

F - 48 hrs. electroless nickel
W - 500 hrs. cadmium olive drab
T-Tie Wrap EB - Cad. free zinc cobolt -olive drab finish
4.40/4.50 FB - Cad. free zinc cobolt - black finish
G-Nylon Rope T- PT FE nickel finish
4.00 SD- Zinc Ni Black finish
With chain S.S.Rope
D-Bead chain Type of attachment
D - bead chain passivated
All Dimensions are in mm
F - Wire rope with teflon jacket
F
Shell A F Max. H L Max. X Max. +0.00/-0.08 G - Nylon cord
+12.70/ Length For Heavy S - Sash chain passivated
Size Ref. Overall. -6.35 Overall Duty
08 12.01 18.26 22.10 X - None
76.20
10 14.99 21.44 24.86
Type of end link:
12 19.05 25.40 29.24
88.90 14.27 19.84 N - Solid ring
14 22.22 28.58 32.41
16 25.40 31.75 35.58 T -Tie wrap
18 28.58 34.92 38.22 X - None
20 31.75 38.10 41.94
101.60 15.88 21.44 Length of attachment:
22 34.92 41.28 45.11
24 38.10 44.45 16.71 22.22 48.18 H - Standard length
All Dimensions for reference only For non- standard ‘H”, length has to be specified in mm.

Cap without attachment

Ordering information IMB3180 - 08 - A - V1

Plug Dust Cover

Shell Size : 08,10,12,14,16,18,20,22 & 24

‘A’

Class:
A - Hard Anodic
W - Aluminium, 500 hrs. Cadmium Olive Drab
F - Aluminium, 48 hrs. electroless nickel
T- Nickel PTFE finish

‘L’ Variant

1
 M IL 26482 Protective Caps MS3180 & MS3181 QPL Approved

‘x’
‘Q’ 2.39 MAX.
Ordering Information (MIL Part Number)
Gasket (Disk)
JANMS3181 10 C W L

Designates Receptacle Dust Cover

Shell Size: 08, 10,12, 14, 16, 18, 20, 22 & 24

Style:
‘L’ C - With Chain

‘H’

‘H’

‘H’
N - With Chain &Ring.
R - With SS Rope
4.50 max

‘K’ Class:
A - Hard Anodize black finish
W - Cadmium plate finish
‘N’

4.50 max
With Chain With Chain With S.S. Length:
(C) & Ring (N) Rope (R) L - 127.0 + 12.7/-6.35 chain/rope in lieu of std. length
Leave blank for std.length
Note: For non. std. long “L” Contact factory

‘X’
‘Q’ 2.39 max.
Ordering Information (Proprietary Part Number)
Gasket (Disk)
IMB3181 08 A F N H
Designates Receptacle Duct Cover

Shell Size: 08, 10,12, 14, 16, 18, 20, 22 & 24

Class: Aluminium
‘L’ A - Hard anodic
‘H’

‘H’

‘H’

B - Zinc nickel finish

F - 48 hrs. electroless nickel
4.50 max.

T-Tie Wrap W - 500 hrs. cadmium olive drab

‘K’ EB - Cad. free zinc cobolt -olive drab finish
G-Nylon Rope FB - Cad. free zinc cobolt - black finish
‘N’

T- PT FE nickel finish
4.50 max. SD- Zinc Ni Black finish
D-Bead chain
With chain With chain & ring With S.S. Rope
Type of attachment
All Dimensions are in mm D -Bead chain passivated
F - Wire rope with teflon jacket
Shell H K L N Q X G - Nylon cord
+12.70/ MIN MIN Max.
Size -6.35 MAX. Max. S - Sash chain passivated
08 20.62 14.68 18.64 X - None
10 76.20 25.40 17.86 21.82
12 30.18 22.63 25.40 Type of end link:
14.27 21.44 N - Solid ring
14 36.67 25.81 28.58
16 88.90 39.67 28.98 31.75 T -Tie wrap
18 42.88 32.16 34.92 X - None
20 46.02 35.33 38.10
22 101.60 49.23 38.51 41.28 Length of attachment:
24 52.37 15.29 41.68 44.45 22.22 H - Standard length
All Dimensions for reference only For non- standard ‘H”, length has to be specified in mm.

Cap without attachment

Ordering information IMB3181 - 08 - A - V1

Designates: Receptacle Dust Cover

Shell Size : 08,10,12,14,16,18,20,22 & 24
Q

Class:
A - Hard Anodic
W - Aluminium, 500 hrs. Cadmium Olive Drab
F - Aluminium, 48 hrs. electroless nickel
T- Nickel PTFE finish
Variant
‘L’

2
 M IL DTL - D38999 SER I Plug Caps QPL Under Qualification

STYLE ‘C’
29.46 max.
22.86 max
1.19 max.
B 14.73 min.
+0.25
14.40-0.38 Cover
Gasket All Dimensions are in mm
Rivet T- Tie Wrap ‘A’ H
Shell ‘B’ +12.70
A Size +0.02
-0.13 max -6.35
09 14.53 18.29
11 17.78 21.59 76.20
S- Sash Chain 13 21.59 25.40
15 24.77 28.70 88.90
Marking P/ No.as per BOM.

STD. LENGTH
17 27.94 31.75
G- Nylon Cord
19 30.66 35.05

‘H’ - 6.35
21 33.83 38.10
+12.7
Location Optional

D- Bead Chain 23 37.01 41.40 101.60

25 40.18 44.45
All Dimensions for reference only
T- (SS) Wire Rope with Teflon Jacket

+0.25
4.24-0.13

Chain S/ A

Ordering Information (Proprietary)

ILJT27501 09 A D T H
Designates Plug Dust Cover
Ordering Information Shell Size: 09, 11, 13, 15, 17, 19, 21, 23 & 25
JANMS27501 B 11 C L
Finish:
Designates Plug Dust Cover A-Hard anodic non-conductive
Shell Size: 09, 11, 13, 15, 17, 19, 21, 23 & 25 W-Cadmium plate with olive drab
E-Electroless nickel
Class: X-Zinc cobalt olive drab
B-Cadmium plate olive drab finish Z-Zinc cobalt olive drab
C-Hard Anodize black finish Type of attachment:
F-Electroless nickel finish D-Bead chain passivated
G-Nylon cord
Style: C-With chain S-Sash chain
A- Without chain T-S.S. wire rope with teflon jacket
X- None
Length
L- 127.0 + 12.7/-6.35 chain/Rope in lieu of std. length. Type of end link:
Leave blank for std. length. ‘H’ T- Tie wrap
X- None (Small link hole dia 4.49 mm max.
Note: For non-standard long ‘L’ contact factory.

Length of attachment:
H-Standard length
For non-standard ‘H’ length has to be specified in inches.

Cap without attachment

22.86 max
Ordering Information
14.73 min 1.19 max ILJT27501 08 A V1
+ 0.25
14.40 - 0.38
Designates Plug Dust Cover

Shell Size: 09, 11, 13, 15, 17, 19, 21, 23 & 25

Class:
A-Hard Anodic
A

W-Aluminium, 500 hrs. cadmium olive drab.

F-Aluminium, 48 hrs. electroless nickel.
T-Nickel PTFE finish.
Variant

3
 M IL DTL - D38999 SER I Receptacle Caps QPL Under Qualification

STYLE ‘C’
27.94 max.
20.83 max
J
Cover
Gasket All Dimensions are in mm
Rivet T- Tie Wrap H
Shell ‘A’ ‘B’ J ‘B’
max. min +12.70 +0.38 max
Size -6.35
09 19.81 17.78 21.84
Q

11 22.99 21.34 76.20 24.89

S- Sash Chain 13 26.95 25.65 29.46
15 30.12 28.96 88.90 32.51
2.67
17 33.05 32.00 35.81
STD. LENGTH

G- Nylon Cord
19 36.12 35.31 38.61
21 39.22 38.35 41.91
H

D- Bead Chain 23 42.34 41.66 101.60 44.96

25 45.54 44.70 3.51 48.01
All Dimensions for reference only
5.84 min. T- (SS) Wire Rope with Teflon Jacket

Ordering Information (Proprietary Part Number)

ILJT27502 09 A D S H
Designates Plug Dust Cover
Ordering Information (MIL Part Number)
Shell Size: 09, 11, 13, 15, 17, 19, 21, 23 & 25
JANMS27502 B 11 C L
Finish:
Designates Plug Dust Cover A-Hard anodic non-conductive
W-Cadmium plate with olive drab
Shell Size: 09, 11, 13, 15, 17, 19, 21, 23 & 25 E-Electroless nickel
X-Zinc cobalt olive drab
Class: Z-Zinc cobalt olive drab
B-Cadmium plate olive drab finish
C-Hard Anodize black finish Type of attachment:
F-Electroless nickel finish D-Bead chain passivated
G-Nylon cord
Style: C-With chain S-Sash chain
A- Without chain T-S.S. wire rope with teflon jacket
X- None
Length
L- 127.0 + 12.7/-6.35 chain/Rope in lieu of std. length. Type of end link:
Leave blank for std. length. ‘H’ S- Solid ring
T- Tie wrap
Note: For non-standard long ‘L’ contact factory. X- None (Small link hole dia 4.49 mm max.
Length of attachment:
H-Standard length
For non-standard ‘H’ length has to be specified in inches.

Cap without attachment

STYLE ‘A’

Ordering Information ILJT27502 09 A V1

Designates: Receptacle Dust Cover

Shell Size: 09, 11, 13, 15, 17, 19, 21, 23 & 25
A

Class:
A-Hard Anodic
W-Aluminium, 500 hrs. cadmium olive drab.
F-Aluminium, 48 hrs. electroless nickel.
T-Nickel PTFE finish.
Variant

4
 M IL DTL - D38999 SER II Plug Caps QPL Under Qualification

STYLE ‘C’ 20.83 max.

14.48 max.
B 1.19 max.
7.87 min.
+0.25
5.64-0.38 Cover
Gasket
All Dimensions are in mm
Rivet
T- Tie Wrap ‘A’ ‘B’ H
Shell
max +12.70
Size +0.02
A
-0.13 OVERALL -6.35
08 12.01 18.29
10 14.99 21.59 76.20
S- Sash Chain 12 19.05 25.40
Marking P/ No.as per BOM.

14 22.22 28.70

STD. LENGTH
88.90
16 25.40 31.75
G- Nylon Cord
18 28.58 35.05

‘H’
Location Optional

20 31.75 38.10
D- Bead Chain 22 34.92 41.40 101.60
24 38.10 44.45
All Dimensions for reference only
T- (SS) Wire Rope with Teflon Jacket
+0.25
4.24-0.13

Chain S/ A

Ordering Information (Proprietary Part Number)

IJT27510 08 A D T H
Ordering Information (MIL Part Number) Designates Plug Dust Cover

Shell Size: 08, 10, 12, 14, 16, 18, 20, 22 & 24
JANMS27510 A 08 C L
Finish:
Designates Plug Dust Cover A-Hard anodic non-conductive
W-Cadmium plate with olive drab
Shell Size: 08, 10, 12, 14, 16, 18, 20, 22 & 24 E-Electroless nickel
X-Zinc cobalt olive drab
Class:
Z-Zinc cobalt olive drab
B-Cadmium plate olive drab finish
C-Hard Anodize black finish Type of attachment:
F-Electroless nickel finish D-Bead chain passivated
G-Nylon cord
Style: C-With chain S-Sash chain
A- Without chain T-S.S. wire rope with teflon jacket
X- None
Length
L- 127.0 + 12.7/-6.35 chain/Rope in lieu of std. length. Type of end link:
Leave blank for std. length. ‘H’ T- Tie wrap
X- None (Small link hole dia 4.49 mm max.
Note: For non-standard long ‘L’ contact factory.

Length of attachment:
H-Standard length
For non-standard ‘H’ length has to be specified in inches.

Cap without attachment

Ordering Information
14.48 max
IJT27510 08 A V1
7.87 min 1.19 max
+ 0.25
5.64 - 0.38 Designates Plug Dust Cover

Shell Size: 08, 10, 12, 14, 16, 18, 20, 22 & 24

Class:
A-Hard Anodic
W-Aluminium, 500 hrs. cadmium olive drab.
A

F-Aluminium, 48 hrs. electroless nickel.

T-Nickel PTFE finish.
Variant

5
 M IL DTL - D38999 SER II Receptacle Caps QPL Under Qualification

Style C
20.83 max.
14.48 max.
2.40 max.

All Dimensions are in mm

T- Tie Wrap
Shell ‘A’ ‘B’ ‘C’ H
Size max. min max max.
B

08 16.00 19.05 22.61

10 19.23 21.82 25.65 76.20
S- Sash Chain 12 23.77 26.19 28.96
14 27.28 29.36 32.0 88.90
16 29.77 32.54 35.31
G- Nylon Cord
STD Length

18 33.12 35.71 38.35

‘H’ -6.35
+ 12.7

20 36.45 38.89 41.66

D- Bead Chain 22 39.62 41.68 44.70 101.60
24 42.88 44.86 48.0
All Dimensions for reference only
T- (SS) Wire Rope with Teflon Jacket

‘C’
Solid Ring 4.49 max.

Ordering Information (MIL Part Number) Ordering Information (Proprietary Part Number)
JANMS27511 A 08 C L IJT27511 08 A D S H
Designates Plug Dust Cover Designates: Receptacle Dust Cover

Class: Shell Size: 08, 10, 12, 14, 16, 18, 20, 22 & 24
B-Cadmium plate olive drab finish
C-Hard Anodize black finish Finish:
A-Hard anodic non-conductive
F-Electroless nickel finish W-Cadmium plate with olive drab
E-Electroless nickel
Shell Size: 08, 10, 12, 14, 16, 18, 20, 22 & 24 X-Zinc cobalt olive drab
Z-Zinc cobalt olive drab
Style: Type of attachment:
C-With chain D-Bead chain passivated
A- Without chain F-S.S. wire rope with nylon jacket
N-With chain & ring G-Nylon cord
R-S.S. Rope hole 3.28 max. (08 to 22 size) S-Sash chain
3.68 max. (24 size) T-S.S. wire rope with teflon jacket
X- None
Length Type of end link:
L- 127.0 + 12.7/-6.35 chain/Rope in lieu of std. length. S- Solid ring
Leave blank for std. length. ‘H’ T- Tie wrap
Note: For non-standard long ‘L’ contact factory. X- None (Small link hole dia 4.49 mm max.)
X1-None (Small link hole dia 3.28 mm max.)
Note: For non-standard long ‘L’ contact factory. X-2 None (Small link hole dia 3.68 mm max.)

Length of attachment:
H-Standard length
For non-standard ‘H’ length has to be specified in inches.
Cap without attachment

Ordering information IJT27511 - 08 - A - V1

Designates: Receptacle Dust Cover

Shell Size : 08,10,12,14,16,18,20,22 & 24
B

Class:
A - Hard Anodic
W - Aluminium, 500 hrs. Cadmium Olive Drab
F - Aluminium, 48 hrs. electroless nickel
T- Nickel PTFE finish
Variant

6
 M IL D3899 III Protective Caps D38999/33 & D38999/32 QPL Approved
‘E’ 30.0 max.
2.00 max.

‘D’

‘B’
‘C’
‘A’
STD. Length

STD. Length
17.06/21.06

‘L’
‘L’

(Alternate Type For Ordering Information (Proprietary Part Number)

Jam Nut Type Only)
S.S. Rope with Ring ITV32 09 A F N H
Teflon Coating (N) S.S. Rope Designates Plug Dust Cover
With Teflon Coating (R)
Shell Size: 09, 11, 13, 15, 17, 19, 21, 23, & 25

All Dimensions are in mm Class

‘A’ ‘C’ ‘L’ Aluminium
Shell Thread B D E A - Hard seal nickel finish
+0.0 + 13.0
Size -2A -0.1P Max
-0.3L-TS -0.15 Max Min -7.0 B - Zinc nickel finish cadmium olive drab
09 0.625” 23.0 12.50 24.0 13.0 F - 48 hrs. elctroless nickel
11 0.750” 26.0 15.75 27.0 18.0 T - PTFE Nickel Plating
13 0.875” 31.0 19.53 30.0 20.0 W - 500 Hrs. cadmium olive drab
15 1.000” 33.0 22.71 31.0 23.0 EB - Cad. free zinc cobolt -olive drab finish
17 1.1875” 37.0 25.88 37.0 26.0 127 FB - Cad. free zinc cobolt - black finish
19 1.250” 40.0 28.55 40.0 29.0 T- PT FE nickel finish
21 1.375” 44.0 31.72 44.0 32.0 SD- Zinc Ni Black finish
23 1.500” 46.0 34.80 45.0 34.0 Composite
25 1.625” 50.0 38.07 49.0 39.0
J - Composite cadmium olive drab
All Dimensions for reference only
M - Composite electroless nickel
NB - Nickel Aluminum Bronze
CD - S. Steel Passivated
Ordering Information (MIL Part Number)
Type of attachment
JAND38999/32 W 15 R D - Bead chain passivated
F - Wire rope with teflon jacket
G - Nylon cord
Designates Plug Dust Cover S - Sash chain passivated
X - None
Class:-
F - Electroless nikel finish. Type of end link
W- Aluminium,500 hrs cadmium olive drab. N - Solid ring
T - Tie wrap
Shell Size : 09,11,13,15,17,19,21,23,&25 X - None

Style- Length of attachment

R - Rope H - Standard length
N - With rope & ring. For non-standard ‘H’ length has to be specified in mm.

Cap without attachment

17.06 /21.06
Ordering information ITV32 - 09 - A - V1

Designates Plug Cover

Shell Size : 09,11,13,15,17,19,21,23 & 25
A THREAD

Class:
A - Hard Anodic
W - Aluminium, 500 hrs. Cadmium Olive Drab
C

J - Composite cadmium olive drab

M - Composite electroless nickel
F - Aluminium, 48 hrs. electroless nickel
EB - Zinc Cobalt Loive drab
T- Nickel PTFE finish
Variant

7
 M IL D3899 III Protective Caps D38999/33 & D38999/32 QPL Approved

30 0 +- ‘D’ 23.0 max.

10 0 2.00 max.

T-Tie Wrap

‘A’ Thread
‘C’

‘B’
STD. Length
S- Sash Chain

STD. Length
12.20/15.70

‘L’
G- Nylon Rope
With S.S. rope ‘L’

D- Bead Chain
Angled Ring
(Alternate Type For
Jam Nut Type Only)
S.S. Rope with Ring
Teflon Coating (N) S.S. Rope
With Teflon Coating (R)
All Dimensions are in mm
‘A’ ‘L’
Ordering Information (Proprietary Part Number)
Shell Thread B ‘C’ D
-2A -0.1P Max + 13.0
Size -0.3L-TS Max Min -7.0 ITV33 09 A F N H
09 0.625” 23.0 27.0 17.64
11 0.750” 28.0 32.0 21.97 Designates Receptocle Dust Cover
13 0.875” 31.0 37.0 25.15
15 1.000” 32.0 40.0 29.92 Shell Size: 09, 11, 13, 15, 17, 19, 21, 23, & 25
17 1.1875” 37.0 44.0 32.0 127
19 1.250” 39.0 46.0 36.27 Class
21 1.375” 42.0 49.0 38.25 Aluminium
23 1.500” 45.0 54.0 42.62 A - Hard seal nickel finish
25 1.625” 49.0 56.0 44.45 B - Zinc nickel finish cadmium olive drab
All Dimensions for reference only
F - 48 hrs. elctroless nickel
T - PTFE Nickel Plating
W - 500 Hrs. cadmium olive drab
EB - Cad. free zinc cobolt -olive drab finish
Ordering Information (MIL Part Number) FB - Cad. free zinc cobolt - black finish
T- PT FE nickel finish
SD- Zinc Ni Black finish
JAND38999/33 W 15 R Composite
J - Composite cadmium olive drab
M - Composite electroless nickel
Designates Receptacle Dust Cover NB - Nickel Aluminum Bronze
CD - S. Steel Passivated
Class:-
F - Electroless nikel finish. Type of attachment
W- Aluminium,500 hrs cadmium olive drab. D - Bead chain passivated
F - Wire rope with teflon jacket
Shell Size : 09,11,13,15,17,19,21,23,&25 G - Nylon cord
S - Sash chain passivated
Style- X - None
R - Rope
N - With rope &ring. Type of end link
N - Solid ring
Note: For non. std. long “L” Contact factory
T - Tie wrap
X - None

Cap without attachment Length of attachment

H - Standard length
12.20/15.70 For non-standard ‘H’ length has to be specified in mm.

Ordering information ITV33 - 09 - A - V1

Designates Receptacle Cover
Shell Size : 09,11,13,15,17,19,21,23 & 25
A THREADS

B MAX

Class:
A - Hard Anodic
W - Aluminium, 500 hrs. Cadmium Olive Drab
J - Composite cadmium olive drab
M - Composite electroless
F - Aluminium, 48 hrs. electroless nickel
T- Nickel PTFE finish
Variant

8
 M IL C5015 Reverse Bayonet Caps 97B - 25042 - XX & 97B 25043 - XX XX-Shell Size

Other Accessories
Protective cap for 97B series
97B-25042
For Plugs 'B'

'D'
‘A’

All dimensions are in mm

'E' + ONE LINK

SHELL 'A' 'B' 'D' 'E'
PART NUMBER
SIZE MAX. MAX. + 0.60/-0 MIN.
97 B - 25042 - 10SL 10 SL 21.0 90.0
INK MARK A CONN. NO. &
97 B - 25042 - 14S 14 S 27.50 23.50
BATCH CODE AS PER BOM. 100.0
97 B - 25042 - 16S 16 S 4.30
30.0
97 B - 25042 - 16 16
115.0
97 B - 25042 - 18 18 33.50
97 B - 25042 - 20 20 37.0
97 B - 25042 - 22 22 40.0 4.70 130.0
97 B - 25042 - 24 24 43.0 31.50
97 B - 25042 - 28 28 49.50
97 B - 25042 - 32 32 56.0
5.50 190.0
97 B - 25042 - 36 36 62.50
97 B - 25042 - 40 40 68.50
Protective Cap For 97B Series
97B-25043
For Receptacle

'B'

'D'
'A'

'E' + ONE LINK

All dimensions are in mm

SHELL 'A' 'B' 'D' 'E'
PART NUMBER
SIZE MAX. + 0.20 + 0.60/-0 MIN.
INK MARK A CONN. NO. & 97 B - 25043 - 10SL 10 SL 23.0
BATCH CODE AS PER BOM. 97 B - 25043 - 14S 14 S 30.0 16.0 90.0
97 B - 25043 - 16S 16 S
32.50
97 B - 25043 - 16 16
4.30 100.0
97 B - 25043 - 18 18 37.0
97 B - 25043 - 20 20 40.50
97 B - 25043 - 22 22 43.50 115.0
97 B - 25043 - 24 24 47.0 20.70
97 B - 25043 - 28 28 54.0
97 B - 25043 - 32 32 60.50
5.50 160.0
97 B - 25043 - 36 36 67.0
97 B - 25043 - 40 40 73.0
Note :- Please add 07 suffix for bigger end link. Applicable for Jam Nut
97B-25043-XX-624-LXX-V1

97B- Reverse Bayonet caps Cap w/o chain & rivet hole
MS- Threaded Caps
For non - std length specified in cm.
25042 - Caps for plug
25043 - Caps for receptacle A23 Electroless Nickel Finish
624 : Zn CO Black
Shell Size 10sl To 36 622 : Zn Co Green
610 : Hard Anodize finish
(Standard supplied Cadmium green colour)

9
M IL C5015 Threaded Caps MS - 25042-XY & MS - 25043 - XX XX-Shell Size

Protective Cap For MS Series

MS-25043
For receptacles Has internal threads and is used on all receptacles. Gasket is provided in the dust cap forming a watertight seal.

A D

C MAX
B MAX

All dimensions are in mm

MS Part number Shell size A Thread in inches B C D E

MS 25043-10 10S 5/8-24 11.11 20.7 3.6 102
MS 25043-12 12S 3/4- 20 11.11 25.4 3.6 115
MS 25043-14 14S 7/8-20 11.11 28.6 3.6 115
MS 25043-16 16-16S 1-20 11.11 30.2 3.6 115
MS 25043-18 18 1 1/8-18 11.11 34.1 3.6 115
MS 25043-20 20 1 1/4-18 11.11 37.3 4.4 127
MS 25043-22 22 1 3/8-18 11.11 40.4 4.4 127
MS 25043-24 24 1 1/2-18 11.11 43.6 4.4 140
MS 25043-28 28 1 3/4-18 12.7 50 4.4 197
MS 25043-32 32 2-18 12.7 56.3 4.8 197
MS 25043-36 36 2 1/4-18 12.7 62.7 4.8 197
MS 25043-40 40 2 1/2-16 12.7 69 4.8 197

Other Accessories
Protective cap for MS series
MS-25042
For plugs Has external threads and is used on all plugs where a coupling ring is provided.

B MAX A D
C MAX

E
All dimensions are in mm

MS Part number Shell size A Thread in inches B C D E

MS 25042-10 10S-1-SL 5/8-24 16.67 17.4 4 102

MS 25042-12 12-12S 3/4- 20 21.4 20.6 4 115
MS 25042-14 14-14S 7/8-20 21.4 23.7 4 115
MS 25042-16 16-16S 1-20 21.4 26.9 4 115
MS 25042-18 18 1 1/8-18 21.4 30 4 115
MS 25042-20 20 1 1/4-18 21.4 33 4.8 127
MS 25042-22 22 1 3/8-18 21.4 36.4 4.8 127
MS 25042-24 24 1 1/2-18 21.4 39.6 4.8 140
MS 25042-28 28 1 3/4-18 21.4 46 4.8 197
MS 25042-32 32 2-18 21.4 52 5.6 197
MS 25042-36 36 2 1/4-18 21.4 58.7 5.6 197
MS 25042-40 40 2 1/2-16 21.4 65 5.6 197

10
 M IL C26482 Heavy Duty Cap 62IN - 1069 - XX For Receptacle

C D

A
00
12

12
0
0

‘L’ + 6.35
J

FOR OTHER DETAILS & CONN. SPEC. REF.OUR 62IN CATALOGUE Ordering Information
All Dimensions are in mm
62IN-1069-10-XXX
Shell ‘A’ ‘C’ ‘D’ ‘J’ ‘L’
‘B’
Size Min. Max +0.25 +0.25 LENGTH
Series Shell Size
08 12.22 17.60 22.66 14.69
10 15.29 20.35 26.84 17.86 76.20 D/Cap Type Plating Finish
12 19.33 24.50 29.01 22. 64
14 22.48 27.90 32.19 13.13 25.81 88.90
16 25.05 31.07 36.94 28.99
18 28.85 33.33 39.70 32.16
20 32.0 36.89 42.85 35.35
22 35.18 40.06 45.65 38.51 101.60
24 38.35 43.14 48.82 14.15 41.68
All Dimensions for reference only

MIL-C 1054 Dust Cap for 10 Pin Audio Connector

17.34 REF.
TYPE - 2
26.30 + 0.10
28.88 REF.
101.60 . +ONE LINK

All dimensions in mm Table 1

127.0 +ONE LINK

Dust Cap No. Link Type Cap Finish

164-377 Type -2 Black Anodised
Cadmium Plate with
164-377-714 Type-2 Electroless Under Coat
164-377-01 Type-1 Black Anodised

Type-1 Cadmium Plate with

164-377-01-714 Electroless Under Coat

4.0 + 0.10 TYPE - 1

11
 M IL DTL - 55116 Protective Caps For Audio connector (5 & 6 Pin)

164-895 14.80 max. 164-896 23.50 Ref. 164-897

16
10.57 max. 46 100+- 0.00
19.
19.71\19.46 1\
.7
19

21.82 max.
18.80 max.

18.29 max.

114.80 max.
10.57 max.
6.35

+16
Length = 100.0-0
+16
Length = 100.0-0
18.29 max.
18.80 max.

164-898 164-899
16
100+- 0.00
100 +16
-0.0

50
3.

14.80 max

10.57 max
14.80 max

10.57 max

18.29 max
18.80 max

18.29 max
19.71\19.46
18.80 max 4.83

164-900
100 +16
-0.0
23.50REF.

14.80 max
10.57 max
14.27/13.54
19.71\19.46

100 +16
-0.0
18.29 max
21.82 max
18.80 max

ORDERING INFORMATION FOR 164 DUST CAP

164 895 CD LXX

Series Designation
164. MIL 55116 Audio Connector
Caps Special Deviation for length
for standard none for Non std.
Shell Style mention length in mm

Finish
Standard Black anodic caps
895:-Receptacle dust caps for 5 & 6 pin CD - Cadmium olive green finish
audio connector with chain & solid ring 622 - Zn Co olive green finish
624 - Zn Co black finish
896:-Plug dust caps for 5 & 6 pin
audio connector with chain & solid ring

897:-Receptacle dust caps for 5 & 6 pin

audio connector with nylon rope & loop

898:-Receptacle dust caps for 5 & 6 pin

audio connector with nylon rope & SS lug
MATERIAL
899:-Receptacle dust caps for 5 & 6 pin Cover : Machined Alluminium Alloy
audio connector with SS rope & lug Gasket : Silicon elastomer
Chain : Stainless steel passivated
900:-Plug dust caps for 5 & 6 pin Ring : Stainless steel passivated
audio connector with SS rope & loop SS Rope : Stainless steel teflon coated
Rope : Nylon (olive green)
901:-Receptacle dust caps for 5 & 6 pin Fastners : Stainless steel passivated
audio connector with nylon rope & solid ring

12
 M IL C-22992 Dust Cap (AQWLD)

Receptacle Dustcap (AQWLD-17349)

A Thread L Protective Cover
Gasket Link Ring Type All dimensions are in mm
Rivet
G
D

D E L G
E Amphenol MS Part No. A Thread 2B Q
Chain MAX. MIN. MAX. MIN.
Part No. Double Start

Q Optional
AQWLD-17349C12* MS17349C12* 0.875-0.1P-0.2L-DS 27.80 21.10 25.80
19.43
‘A’ Design AQWLD-17349C14* MS17349C14* 1.000-0.1P-0.2L-DS 31.00 22.10 29.00
AQWLD-17349C16* MS17349C16* 1.1250-0.1P-0.2L-DS 34.10 24.60 32.20 127.00
AQWLD-17349C18* MS17349C18* 1.250-0.1P-0.2L-DS 37.30 25.70 35.30
AQWLD-17349C20* MS17349C20* 1.375”-0.1P-0.2L-DS 39.70 28.40 38.50
AQWLD-17349C22* MS17349C22* 1.500”-0.1P-0.2L-DS 42.90 30.20 41.70
AQWLD-17349C24* MS17349C24* 1.750-0.1P-0.2L-DS 49.30 33.80 24.90 48.00
AQWLD-17349C28* MS17349C28* 2.000”-0.1P-0.2L-DS 56.40 37.60 54.40
152.40
AQWLD-17349C32* MS17349C32* 2.250-0.1P-0.2L-DS 62.70 41.10 60.70
AQWLD-17349C36* MS17349C36* 2.500-0.1P-0.2L-DS 69.10 45.00 67.10
AQWLD-17349C40* MS17349C40* 2.750-0.1P-0.2L-DS 75.40 48.50 73.40
*Add attaching ring A, B,or C.

Plug Dustcap (AQWLD-17350) All dimensions are in mm

Q
Amphenol D H -0.0
38.10 max. MS Part No. A Thread 2A
A Thread
Part No. MAX. MIN. +1
Protective Cover Double Start
LINK
AQWLD-17350C10* MS17350C10* 0.750-0.1P-0.2L-DS 20.60 18.30
Rivet
AQWLD-17350C12* MS17350C12* 0.875-0.1P-0.2L-DS 23.80 21.40
D

AQWLD-17350C14* MS17350C14* 1.000-0.1P-0.2L-DS 27.00 24.70

Chain 127.00
AQWLD-17350C16* MS17350C16* 1.1250-0.1P-0.2L-DS 30.20 27.70
‘Q’
AQWLD-17350C18* MS17350C18* 1.250-0.1P-0.2L-DS 33.30 30.90
‘B’ Design
AQWLD-17350C20* MS17350C20* 1.375”-0.1P-0.2L-DS 36.50 34.00
AQWLD-17350C22* MS17350C22* 1.500”-0.1P-0.2L-DS 39.70 37.30

Chain
AQWLD-17350C24* MS17350C24* 1.750-0.1P-0.2L-DS 46.00 43.60
AQWLD-17350C28* MS17350C28* 2.000”-0.1P-0.2L-DS 52.40 50.00
152.40
Wire Link AQWLD-17350C32* MS17350C32* 2.250-0.1P-0.2L-DS 58.70 56.30
RingType
AQWLD-17350C36* MS17350C36* 2.500-0.1P-0.2L-DS 65.10 62.70
‘H’
AQWLD-17350C40* MS17350C40* 2.750-0.1P-0.2L-DS 71.40 70.60
*Add attaching ring A, B,or C.

‘C’ Design

Series
AQWLD
Type Ordering Information AQWLD 49 C 20 A
AQWLD 17349 - Cap for Receptacle
AQWLD 17350 - Cap for Plug Series
Finish Type
N - Black Anodized (Non-conductive)
C - Cadmium over electroless nickel (Conductive) Finish
Size Size
12 14 16 18 20 22 24 28 32 36 40
Design
Design
A - Chain & mounting ring
B - Chain without ring
C - Chain with clip
13
 M IL 26482 Dummy Receptacle

Gasket to be cemented to dust cap

Shell ‘B’ ‘C’
Size Sq. +0.08
08 20.62 11.96
10 23.80 14.94
12 26.59 18.97
14 28.58 22.17
16 31.34 25.32
18 33.32 28.52
20 36.50 31.70
22 39.67 34.87
24 42.85 38.05.

62IN-3115-XX-XY
Description code
Series
Shell size
Plating Finish

MIL 5015 Dummy Receptacle Bayonet

Front Panel Mounting Dummy Receptacles

Rear Side Closed

SQ A
SQ B E F
C

G D

‘A’ ‘B’ ‘C’ ‘D’ ‘E’ ‘F’

Part No. + 018 +0.13 +0.00 +0.10 +0.30 +0.18 ‘G’
-0.20 -0.13 -0.00 -0.00 97B-3105-10SL-CF-T4-R
97B-3105-10SL-CF 25.40 18.20 18.20 3.20 14.20 2.80 M4
97B-3105-14SL-CF 30.00 23.00 23.00 3.20 14.20 3.20 M4
97B-3105-16SL-CF 32.50 24.60 24.60 3.20 14.20 3.20 M4 Connector Series
97B-3105-16-CF 32.50 24.60 24.60 3.20 19.00 3.20 M4 Dummy Receptacle
97B-3105-18-CF 35.00 27.00 30.80 3.20 19.00 4.00 M4
97B-3105-20-CF 38.00 29.40 34.20 3.20 19.00 4.00 M4 Shell Size
97B-3105-22-CF 41.00 31.80 37.40 3.20 19.00 4.00 M4 CF - Closed Flange. HF - Hollow Flange
97B-3105-24-CF 44.50 34.90 40.90 3.70 20.60 4.00 M4
97B-3105-28-CF 50.80 39.70 46.70 3.70 20.60 4.00 M5 Tapped Flange Holes (Standard Thru Holes)
97B-3105-32-CF 57.10 44.50 53.40 4.30 22.20 4.00 M5
97B-3105-36-CF 63.50 49.20 59.60 4.30 22.20 4.00 M5 Rear Mount (Standard Front Mount)
97B-3105-40-CF 69.90 55.50 65.50 4.30 22.20 4.00 M5
14
 M IL 5015 Bayonet Dummy Receptacle

Front Panel Mounting Dummy Receptacles

Rear Side Opened
SQ A
E F
SQ B
‘A’ ‘B’ ‘C’ ‘D’ ‘E’ ‘F’
Part No. + 018 +0.13 +0.00 +0.10 +0.30 +0.18 ‘G’
-0.20 -0.13 -0.00 -0.00
97B-3105-10SL-HF 25.40 18.20 18.20 3.20 14.20 2.80 M4
97B-3105-14SL-HF 30.00 23.00 23.00 3.20 14.20 3.20 M4
97B-3105-16SL-HF 32.50 24.60 24.60 3.20 14.20 3.20 M4
97B-3105-16-HF 32.50 24.60 24.60 3.20 19.00 3.20 M4
97B-3105-18-HF 35.00 27.00 30.80 3.20 19.00 4.00 M4
c 97B-3105-20-HF 38.00 29.40 34.20 3.20 19.00 4.00 M4
97B-3105-22-HF 41.00 31.80 37.40 3.20 19.00 4.00 M4
97B-3105-24-HF 44.50 34.90 40.90 3.70 20.60 4.00 M4
97B-3105-28-HF 50.80 39.70 46.70 3.70 20.60 4.00 M5
97B-3105-32-HF 57.10 44.50 53.40 4.30 22.20 4.00 M5
97B-3105-36-HF 63.50 49.20 59.60 4.30 22.20 4.00 M5
97B-3105-40-HF 69.90 55.50 65.50 4.30 22.20 4.00 M5
G D

Back Panel Mounting Dummy Receptacles

Rear Side closed
SQ A

SQ B E F

‘A’ ‘B’ ‘C’ ‘D’ ‘E’ ‘F’

Part No. + 018 +0.13 +0.00 +0.10 +0.30 +0.18 ‘G’
-0.20 -0.13 -0.00 -0.00
97B-3105-10SL-CF 25.40 18.20 18.20 3.20 18.30 2.80 M4
97B-3105-14SL-CF 30.00 23.00 24.60 3.20 18.30 3.20 M4
97B-3105-16SL-CF 32.50 24.60 27.40 3.20 18.30 3.20 M4
97B-3105-16-CF 32.50 24.60 27.40 3.20 23.15 3.20 M4
97B-3105-18-CF 35.00 27.00 30.80 3.20 23.15 4.00 M4
c

F 97B-3105-20-CF 38.00 29.40 34.20 3.20 23.15 4.00 M4

97B-3105-22-CF 41.00 31.80 37.40 3.20 23.15 4.00 M4
97B-3105-24-CF 44.50 34.90 40.90 3.70 23.15 4.00 M4
97B-3105-28-CF 50.80 39.70 46.70 3.70 24.15 4.00 M5
97B-3105-32-CF 57.10 44.50 53.40 4.30 24.15 4.00 M5
97B-3105-36-CF 63.50 49.20 59.60 4.30 24.15 4.00 M5
97B-3105-40-CF 69.90 55.50 65.50 4.30 24.15 4.00 M5

G D

Front Back Mounting Dummy Receptacles

Rear Side Opened
SQ A
‘A’ ‘B’ ‘C’ ‘D’ ‘E’ ‘F’
SQ B E F + 018 +0.13 +0.00 +0.10 +0.30 +0.18
Part No. ‘G’
-0.20 -0.13 -0.00 -0.00
97B-3105-10SL-HF 25.40 18.20 18.20 3.20 18.30 2.80 M4
97B-3105-14SL-HF 30.00 23.00 24.60 3.20 18.30 3.20 M4
97B-3105-16SL-HF 32.50 24.60 27.40 3.20 18.30 3.20 M4
97B-3105-16-HF 32.50 24.60 27.40 3.20 23.15 3.20 M4
97B-3105-18-HF 35.00 27.00 30.80 3.20 23.15 4.00 M4
97B-3105-20-HF 38.00 29.40 34.20 3.20 23.15 4.00 M4
97B-3105-22-HF 41.00 31.80 37.40 3.20 23.15 4.00 M4
97B-3105-24-HF 44.50 34.90 40.90 3.70 23.15 4.00 M4
c

97B-3105-28-HF 50.80 39.70 46.70 3.70 24.15 4.00 M5

97B-3105-32-HF 57.10 44.50 53.40 4.30 24.15 4.00 M5
97B-3105-36-HF 63.50 49.20 59.60 4.30 24.15 4.00 M5
97B-3105-40-HF 69.90 55.50 65.50 4.30 24.15 4.00 M5

G D

15
M IL 5015 Threaded Dummy Receptacle

A
B E

Other Accessories
Dummy receptacle
MS-3105

OC O G D F MAX

All dimensions are in mm

Part number A B C D E F G
(see note) Thread
in inches max.
MS-3105-10S 25.4 18.26 3.05 5/8-24 14.27 3.96 8.20
MS-3105-12S 27.79 20.62 3.05 3/4-20 14.27 3.96 11.43
MS-3105-12 27.79 20.62 3.05 3/4-20 19.05 3.96 11.43
MS-3105-14S 30.17 23.01 3.05 7/8-20 14.27 3.96 13.36
MS-3105-14 30.17 23.01 3.05 7/8-20 19.05 3.96 13.36
MS-3105-16S 32.54 24.61 3.05 1-20 14.27 3.96 16.41
MS-3105-16 32.54 24.61 3.05 1-20 19.05 3.96 16.41
MS-3105-18 34.92 26.97 3.05 1 1/8-18 19.05 5.16 18.03
MS-3105-20 38.10 29.36 3.05 1 1/4-18 19.05 5.16 23.54
MS-3105-22 41.27 31.75 3.05 1 3/8-18 19.05 5.16 25.93
MS-3105-24 44.45 34.92 3.73 1 1/2-18 20.62 5.16 29.21
MS-3105-28 50.8 39.67 3.73 1 3/4-18 20.62 5.16 34.67
MS-3105-36 63.5 49.22 4.39 2 1/4-16 22.2 9.11 46.56

Note: The dash number also indicates shell size.

MIL DTL 38999 Series III Dummy Receptacle

+0.13
3.20-0.0
M/KEYWAY L
D
60 + 0
0
5 15.90 + 0.05

13.20
First & Last THD. 300
G SQ.

Gasket To Be Cemented To Dust Cap

B THD

After Plating Fully

Mated Indicator Band

Mil. A ‘B’ ‘G’

Shell +0.13 D +0.23 ‘L’
Size Code -0.0 R H Thread -0.25
09 A 11.23 5/8” 0.1P-.3LTS 31.75 23.83
11 B 14.48 3/4” 0.1P-.3LTS 34.93 26.19 Ordering Information
13 C 17.32 7/8” 0.1P-.3LTS 38.10 28.58
15 D 20.50 1.0” 0.1P-.3LTS 41.28 30.96 18.50 ITV22 - 09 - W
17 E 23.67 1 3/16” 0.1P-.3LTS 44.45 33.32
19 F 26.34 1 1/4” 0.1P-.3LTS 47.63 36.53 Series
21 G 29.51 1 3/8” 0.1P-.3LTS 50.80 39.67 Shell Size Plating Finish
23 H 32.69 1 1/2” 0.1P-.3LTS 55.58 42.88 19.50
25 J 35.86 1 5/8” 0.1P-.3LTS 60.33 46.02

16
 I nsertion Removal Tool

Attachable
Plug
H DIA

H DIA
Installing Tip Removal Tip

L
Ordering Information IRT - XXX - XX

M M Insertion & Removal Tool

22.86 min. 22.86 min. Contact Size
‘A’ Colour Code

Colour Code
SR. MIL Part Amphenol Contact Installing Removal ‘A’ ‘M’ ‘L’ ‘H’
NO Number Part Number Size Tip Tip max. min. max. max.
1 M81969/14-01 IRT - 22D -GW 22D Green White 114.0 15.24 7.36 2.28
2 M81969/14-11 IRT - 20 -RW 20 Red White 114.0 19.30 7.36 3.81
3 M81969/14-10 IRT - 20 -RO 20 Red Orange 114.0 19.30 7.36 3.81
4 M81969/14-03 IRT - 16 -BW 16 Blue White 114.0 25.40 11.18 5.87
5 M81969/14-04 IRT - 12 -YW 12 Yellow White 114.0 25.40 11.18 7.29

Backshell for D - SUB (M24308) Connector

BACKSHELL FOR D- SUB (M24308) CONNECTOR:

A. METALLIC STRAIGHT CABLE HOUSING WITH CABLE CLAMP :

D
B

A
L MAX

Ordering Information No. of PINS

SHELL D L
M2000/48 - 2 - X - XX Sr.No. MIL Part No. DENSITY A B C max max
SIZE
STD HIGH
SERIES No. 1 M2000/48-2-1Z 1 9 15 30.70 12.40 24.99 10.30 27.80
DASH No.
2 M2000/48-2-2Z 2 15 26 39.00 12.40 33.32 10.30 27.80
SHELL SIZE
FINISH DESIGNATOR 3 M2000/48-2-3Z 3 25 44 52.90 12.40 47.04 15.10 28.60
4 M2000/48-2-4Z 4 37 62 69.20 12.40 63.50 18.30 28.60
5 M2000/48-2-5Z 5 50 78 66.80 15.25 61.11 18.30 28.60
FINISH : F - CADMIUM PLATE WITH YELLOW PASSIVATION
Z - ZINC PLATE WITH YELLOW PASSIVATION
TI - TIN PLATED

17
 B ackshell for D - SUB (M24308) Connector

Hood for D-Sub (M24308) Connector Metal Hood (Straight Entry)

D

B
L

4-40 UNC
A SCREW

Ordering Information (Military Part Number)

M2000 / X X -XXXX
All Dimensions are in mm
Shell No. of Pins
Sr. Density ‘A’ ‘B’ ‘C’ ‘D’ ‘L’
Series No. No. Size
Std. High
01 01 09 15 31.50 15.60 24.99 6.00 47.60
Shell Size 40.80 15.60 33.30 10.00
02 02 15 26 48.20
03 03 25 44 54.20 16.00 47.00 10.00 48.80
Finish Designator 04 04 37 62 69.20 16.00 63.50 10.20 48.60
05 05 50 78 67.10 18.00 61.10 12.30 48.60
Type-
* For angle entry please contact factory.
MH- Metal Hood (Straight Entry)
MHA- Metal Hood (Angle Entry)
PH- Plastic Hood (Straight Entry)
PHA- Plastic Hood (Angle Entry) Finish-
MPH- Metallized Plastic Hood Z- Zinc Plate with yellow passivation
(Straight Entry) F- Cadmium Plate with yellow
MPHA- Metallized Plastic Hood passivation
(Angle Entry)
For nickel plated no suffix is required.

Flange Mounting Gasket

62IN-760-XX
(Replace XX with the required shell size)
D Sq H

G E

All dimensions in mm

Shell D E F Dia G Dia H

size max

8 20.62 15.08 12.90 3.30 1.06

10 23.82 18.26 16.07 3.30 1.06
12 26.18 20.65 19.25 3.30 1.06
14 28.57 23.01 22.42 3.30 1.06
16 30.96 24.61 25.60 3.30 1.06
18 33.32 27.00 28.77 3.30 1.06
20 36.52 29.36 31.95 3.30 1.06
22 39.70 31.75 35.13 3.30 1.06
24 42.87 34.92 38.30 3.96 1.06

18
 F lange Mounting Gasket

Other Accessories
Plain flat gasket
For MS and 97B flange mounted receptacles
C
A

O B

C
A
OD

4 HOLES
All dimensions are in mm T
Part number Shell size A max B C D T
MS-101000 10SL 18.26 15.90 25.40 4.35 1.5
MS-108686 12S & 12 20.62 19.05 27.80 4.35 1.5
MS-101001 14S & 14 23.01 22.20 30.15 4.35 1.5
MS-101002 16S & 16 24.61 25.40 32.50 4.35 1.5
MS-101003 18 27.00 28.57 34.90 5.15 1.5
MS-101004 20 29.36 31.75 38.10 5.15 1.5
MS-101005 22 31.75 34.90 41.20 5.15 1.5
MS-108687 24 34.90 38.10 44.45 5.15 1.5
MS-101006 28 39.70 44.45 50.80 5.15 1.5
MS-108688 32 44.45 50.80 57.15 5.55 1.5
MS-101007 36 49.22 55.57 63.50 5.55 1.5
MS-110831 40 55.77 61.92 69.85 5.55 1.5

*For Conductive and rear Mount Gasket contact factory.

Notice : All information, including illustrations given herein is believed to be accurate at the time of printing. In lieu of design advances,
Amphenol reserves the right to change specifications without notice. This publication Dust Cap Accessory Series Connectors AC
ACC11 1211 supercedes all existing Amphenol literature on Dust Cap Accessory Series Connectors.

19
 NORTH AMERICA
Sales & Product Support

Amphenol PCD Amphenol Aerospace Operations Amphenol Canada Amphenol Fiber Systems International
72 Cherry Hill Drive 40-60, Delaware Avenue Meford Drive 1300 Central Expressway North
Beverly, MA 01915 USA Sidney, NY 13838-1395 Scarborough, Suite 100 Allen,Texas 75013, USA
Tel: +1-978-624-3400 Tel: +1-607-563-5011 ON MIB 2X6 Tel: +1-214-547-2400
Fax: +1-978-927-1513 Fax: +1-607-563-5357 Tel: +416-291-4401 Fax: +1-214-547-9344
info@amphenolpcd.com Fax: +416-292-0647
www.amphenolpcd.com
www.backshellworld.com
EUROPE
France United Kingdom Germany Italy Center & East Europe
Amphenol Socapex S.A.S. Amphenol Limited Amphenol-Air LB GmbH Via Barbaiana 5 Amphenol
948,Promenade de I'Arve Thanet Way, Whitstable Am Kleinbahnhof 4 20020 Lainate (Milano) Wiener Gasse 68
Bp29, Thyez Cedex Kent CT5 3JF, England Saarlouis Italy 2380 Perchtoldsdorf
74311, France Tel: +44-1227-773-200 D-66740, Germany Tel :+39-02-93254.209 Tel: +43-699-10396071
Tel: +33-4-5089-2800 Fax: 44-1227-276-571 Tel: 49-6831-9810-00 +39-02-93254.214 Fax: +43 699 40396071
Fax: +33-4-5096-1941 Fax: 49-6831-9810-30 Fax:+39-02-93254-444

Amphenol Air-LB Spain Austria Holland Sweden

Immeuble Le Doublon Amphenol Iberica Amphenol Austria Amphenol Benelux Amphenol
11, Avenue Dobonnet Edificio Burgosol Oficina Wiener Gasse 68 Zadelmaker 121 (Nordic & Baltic)
Courbevoice-Cedex 2380, Erchtoldsdarf, NL-2401 PD Alphen Ängsullsvägen 7
N 55 C/Comunidad de
92407, France Austria aan den Rijn Holland S-187 51 Täby.
Madrid 35 bis -
Ph: +33-1-4905-3000 Tel : + 43-69910396071 Tel:+31-172-444903 Sweden
Las Rozas (Madrid)
Fax: +33-1-4905-3043 Tel: +34-91-6407302 Fax: + 43-69940306071 Fax:+31-172 240254 Tel: +46-85-1051816
+34-91-6407306 +46-76-8418600
Fax:+34-91-6407307 Fax: +46-70- 2634677
+46-70-2203197
ASIA
India Japan Singapore China
Amphenol Japan Amphenol East Asia Ltd. Amphenol PCD Shenzhen
Amphenol Interconnect India Pvt. Ltd.
471-1, Deba, Ritto City 72 Bendemeer Road 3/F Building, A4 Songbai
105 Bhosari Industrial Area
Shiga 520-3041, Japan # 03-33 Luzerne Industrial Park
Pune-411026, India
Tel: +81-77-553-8501 Singapore 339 941 East Road of Minghuan
Tel: +9120-3068-8305
Fax: +81-77-551-2200 Tel: 65-6294-2128 Gongming Town, Baon District
Fax:+9120-2712-9158
Fax: 65-6294-3522 Shenchen, China
Tel: +86-755-8173-8000
Amphenol Interconnect India Pvt. Ltd. Korea
Amphenol Daeshin Electronics Fax: +86-755-8173-8180
61 Electronics City
Bangalore-560 100, India 558 SoSa, SongNae, Bucheon-City
Ph: +9180-2852-3838 Kyunggi-Do, Korea 420-130
Fax: +9180-2852-0418 Tel: +82-32-610-3800
Fax: +92-32-673-2507

ROW
Australia Africa Russia Argentina
Amphenol Australia Pty Ltd Amphenol South Africa Amphenol Russia Amphenol Argentina
2 Fiveways Boulevard 30 Impala Road 8-2 Yaroslavskaja Str Avenida Callao 930
Keysborough 2196 Sandton-Chistlehurston 129164 Moscow, Russia 2nd Floor, Office B Plaza
VIC 3173 South Africa Tel: +7-495-937-6341 C1023AAP Buenos Aires
Ph: +61-3-8796-8888 Tel: +27-11-783-9517 Fax: +7-495-937-6319 Argentina
Fax: +61-3-8796-8801 Fax: +27-11-783-9519 Tel: 54-11-4815-6886
Fax: 54-11-4814-5779
Israel Maslak Brazil
Bar-Tec Ltd. 34396 Istanbul Amphenol do Brasil Ltda
P.O. Box 279 Tel: +90-212-335-2501 Rua Diogo Moreira 132
Kfar Sava, 44102 Israel Fax: +90-212-335-2500 CEP 05423-010
Tel: +972-9-7644100 Sao Paulo-SP, Brazil
Fax: +972-9-7674324 Tel: +55-11-3815-1003
Fax: +55-11-3815-1629
Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Amphenol:
TT0608001-03P TT0608001-03S TT0608001-03I TT0608001-03H TT0608001-02G TT0608001-01G TT0608001-
01H TT0608001-01I TT0608001-01J TT0608001-01M TT0608001-01N TT0608001-03J TT0608001-01S
TT0608001-02H TT0608001-02I TT0608001-02J TT0608001-02M TT0608001-02N TT0608001-02P TT0608001-
02S TT0608001-03G TT0608001-01P MS3181-12CA MS3180-14RA MS318110N MS3181-10RAL MS3180-18C
MS27501B21C MS3181-12RA MS27501B25C MS3180-10C MS31818CA MS318112N MS3181-14RA MS3181-
24CA MS318122CA MS31808CA MS27501B15CN MS27501B13C MS3181-8RA MS27501B19CN MS318116C
MS3181-18NA MS3180-16CA MS318014CA MS27501B25CL MS3180-12C MS3180-10CA MS3180-12RAL
MS318114CA MS318120NA MS3181-12RAL MS3180-8C MS3180-14C MS3181-18C MS318020CA
MS27501B23C MS3180-24CA MS3181-14C MS27501B13CN MS318018CA MS318118RA MS27501B21CN
MS3180-8CAL MS2504316DA MS27501B17CL MS3181-10NA MS3181-16CA MS27501B11C MS3181-10RA
MS31818C MS318122C MS318120CA MS27501B19CL MS318112CAL MS3180-22CA MS318122NA
MS318116NA MS318012CA MS318110C MS3181-18CA MS2504318DA MS318114NA MS318022CAL MS3180-
14CA MS3181-18CL MS3180-14RW MS3181-10NL MS3181-20NW MS3180-16CL MS3181-08CA MS3181-16RA
MS3181-08RA MS3181-24CL MS3181-08RW MS3181-10RW MS3181-08CL MS3181-08CW MS3181-24RL
MS3181-14RW