2 Pentanol
2 Pentanol
2 Pentanol
2
Revision Date 27.10.2023
according to Regulation (EC) No. 1907/2006 Print Date 21.10.2024
GENERIC EU MSDS - NO COUNTRY SPECIFIC DATA - NO OEL DATA
1.2 Relevant identified uses of the substance or mixture and uses advised against
Identified uses : Laboratory chemicals, Manufacture of substances
1.3 Details of the supplier of the safety data sheet
Company : Sigma-Aldrich Chemical Pvt Limited
Industrial Area, Anekal Taluka
Plot No 12,
12 Bommasandra - Jigani Link Road
560100 BANGALORE
INDIA
1.4 Emergency telephone
Emergency Phone # : 000 800 1007 141 (CHEMTREC)
Ecological information:
The substance/mixture does not contain components considered to have endocrine
disrupting properties according to REACH Article 57(f) or Commission Delegated regulation
(EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher.
Formula : C5H12O
Molecular weight : 88,15 g/mol
CAS-No. : 6032-29-7
EC-No. : 227-907-6
Index-No. : 603-006-00-7
Component Classification Concentration
2-pentanol
CAS-No. 6032-29-7 Flam. Liq. 3; Acute Tox. 4; <= 100 %
EC-No. 227-907-6 Skin Irrit. 2; Eye Irrit. 2;
Index-No. 603-006-00-7 STOT SE 3; H226, H332,
H315, H319, H335
For the full text of the H-Statements mentioned in this Section, see Section 16.
Eye/face protection
Use equipment for eye protection tested and approved under appropriate
government standards such as NIOSH (US) or EN 166(EU). Safety glasses
Skin protection
This recommendation applies only to the product stated in the safety data sheet,
supplied by us and for the designated use. When dissolving in or mixing with other
substances and under conditions deviating from those stated in EN 16523-1 please
contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell,
Internet: www.kcl.de).
Full contact
Material: butyl-rubber
Minimum layer thickness: 0,7 mm
Break through time: 480 min
Material tested:Butoject® (KCL 898)
This recommendation applies only to the product stated in the safety data sheet,
supplied by us and for the designated use. When dissolving in or mixing with other
substances and under conditions deviating from those stated in EN 16523-1 please
contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell,
Internet: www.kcl.de).
Splash contact
Material: Nitrile rubber
Minimum layer thickness: 0,4 mm
Break through time: 240 min
Material tested:Camatril® (KCL 730 / Aldrich Z677442, Size M)
Aldrich- W331600 Page 5 of 12
(Expert judgment)
Dermal: No data available
Skin corrosion/irritation
Skin - Rabbit
Result: Skin irritation - 24 h
Remarks: No data available
Other regulations
Observe work restrictions regarding maternity protection in accordance to Dir 92/85/EEC or
stricter national regulations where applicable.
Take note of Dir 94/33/EC on the protection of young people at work.
15.2 Chemical Safety Assessment
For this product a chemical safety assessment was not carried out
Further information
The above information is believed to be correct but does not purport to be all inclusive
and shall be used only as a guide. The information in this document is based on the
present state of our knowledge and is applicable to the product with regard to
appropriate safety precautions. It does not represent any guarantee of the properties of
the product. Sigma-Aldrich Corporation and its Affiliates shall not be held liable for any
damage resulting from handling or from contact with the above product. See
www.sigma-aldrich.com and/or the reverse side of invoice or packing slip for additional
terms and conditions of sale.
Copyright 2020 Sigma-Aldrich Co. LLC. License granted to make unlimited paper copies
for internal use only.
The branding on the header and/or footer of this document may temporarily not visually
match the product purchased as we transition our branding. However, all of the
information in the document regarding the product remains unchanged and matches the
product ordered. For further information please contact mlsbranding@sial.com.
Aldrich- W331600 Page 11 of 12