Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 3 views

    Skill Sessions - 4: Single Story Three-Dimensional Frame, Dynamic Response Spectrum Analysis

    Uploaded by

    Boppana Kumar

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Skill Sessions - 4: Single Story Three-Dimensional Frame, Dynamic Response Spectrum Analysis

    Uploaded by

    Boppana Kumar
    3 views18 pages

    Original Title

    4

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    3 views18 pages

    Skill Sessions - 4: Single Story Three-Dimensional Frame, Dynamic Response Spectrum Analysis

    Uploaded by

    Boppana Kumar

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 18

    SKILL SESSIONS -4

    Single Story Three-Dimensional Frame, Dynamic


    Response Spectrum Analysis

     Open the ETABS Program

    1) Click the File menu > New model command

    Fig-1

    2) The next form of Building Plan Grid System and Story Data Definition will be displayed after
    you select the NO button.

    Fig-2
    3) TO show the story properties Edit>Edit stories and Grid System> modify/Show story data

    Fig-3

    4)To change the units, On bottom right corner you see the units.

    Fig-4
    5)Define the design code using the Design > Concrete Frame Design command>View/review
    refence

    Fig-5

    6) This will display the Concrete Frame Design Preference form as shown in the figure.

    Fig-6
    7) Click the Define menu > Material Properties

    Fig-7.1

     Add New Material or Modify/Show Material used to define material properties

    Fig-7.2
    8) Define section columns and beams using Define >Section properties > Frame section>Add
    new material properties

    a)Create a Beam:

    Fig8.1(a)

     Reinforcement:

    Fig-8.2(a)
    b) Create a Column:

    Fig-8.3(b)

     Reinforcement:

    Fig-8.4(b)
    9) Generate the model

     Draw beam using Create Line Command and draw column using Create Column command

    Fig-9.1

     Above creating option used to generate the model as shown in below figure:

    Fig-9.2
    10) Define various loads (Dead load, live load)

    Fig-10

    11)Load Combinations:

    Fig-11
    12) Assign support condition Drop-down box in the lower right-hand corner of the ETABS window,
    Select only bottom single storey level to assign fixed support using Assign > Joint/Point>Restrain
    (Support) command

    Fig-12.1

     Select the fixed support

    Fig-12.2
    13) Dynamic Response Spectrum Analysis:

    Fig-13
    14) Run analysis from Analyse > Run Analysis command

    Fig-14.1

     Shear force Diagram of Frame:

    Fig-14.2
     Bending moment Diagram:

    Fig-14.3
    15) Design of frame:

    Fig-15.1

    Fig-15.2
     Check weather the all member in frame are passed

    Fig-15.3
    16)DESIGN OF COLUMN:
    17)DESIGN OF BEAMS:

    You might also like