Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

3010-MINIFID Data Sheet

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

3010 MINIFID

Portable heated FID VOC analyser

Portable Flame Ionisation Detector


(FID) analysers for the discontinuous
measurement of the mass
concentration of gaseous and
vaporous organic substances in
stationary source emissions.

Typical applications include the


emissions testing of solvent-using
and combustion processes, engine
emissions, and VOC abatement
systems, as well as checking and
calibrating installed CEMS and
providing interim backup when
CEMS are out of operation.

Compliant Flexible & reliable Easy to use


USEPA: 40 CFR Part 60 method 25A Designed for portability Warm-up typically 20 mins
China: CPA 2015-C174 Military style design No microprocessor or software

EN14181 QAL1 (MCERTS) Thousands sold globally Just 5 simple functions


applied for Many still in operation after years 0-10v output or optional logger
of rigorous work

Rack-mounted
FID for continuous
monitoring
3010 MINIFID

SPECIFICATIONS
RANGES SAMPLE INTERLOCK CALIBRATION GASES
Range A: 0-10,000ppm (Standard) Sample pump cannot start until analyser 1000ppm C3H8/air (Standard)
Range B: 0-10% High Range (Optional) is at set temperature of at least 130 oC 500ppm CH4/air

SENSITIVITY SAMPLE FILTER CAL GAS FLOW RATE


0.01% of range 0.4 microns PTFE which can be cleaned 0.4 l/min
and reused (accessible from rear of
LINEARITY analyser) ZERO AIR
2% of measured value Internally generated with carbon or
SAMPLE FLOW catalytic scrubber
DRIFT 0.4-3 l/min. (internal sample pump)
+/-0.2ppm or 2% range per week, FLAME AIR
whichever greater SAMPLE LINE LENGTHS Internally generated with carbon or
3, 5, 10 or 15m of ¼” OD PTFE heated catalytic scrubber
NOISE to 191oC controlled by the gas analyser.
+/-0.1ppm or % range, whichever Other lengths up to 15m on request. ANALYSER WEATHER PROTECTION
greater IP 20 (IP 55 when fitted with tailored
EASY CARRY fabric cover)
RESPONSE TIME Shoulder strap with attachment clips
<T90 in 2 seconds OPERATING AMBIENT TEMPERATURE
OPERATING CONTROLS +5 to +40 oC
POWER 3 ½ digit LCD display. Temperature
110V AC or 220V AC, 500 Watts reading for heated line & sampling ACCREDITATIONS
system. Ignition switch. Range select EN 15267-4:2017
HEATED SAMPLE LINE TEMPERATURE and calibration controls EN 12619:2013
191 oC EN 61000-6-1:2007
RECORDER OUTPUTS EN 61000-6-3:2007+A1:2011
ANALYSER SAMPLING SYSTEM 0-10 V DC and 4-20 mAmp isolated EN 61000-6-4:2007+A1:2011
TEMPERATURE EN 61010-2-081:2015
191 oC DATA LOGGER USEPA: 40 CFR Part 60 method 25A
Built into analyser with software for PC China: CPA 2015-C174
WEIGHT WITH GAS BOTTLES to log to spreadsheet
12 Kg (25 lbs)
GAS - QUICK CONNECTS
WEIGHT WITHOUT GAS BOTTLE Colour coded for fuel and calibration gas
9Kg (18 lbs)
GAS BOTTLE CAPACITY
DIMENSIONS 1 litre water capacity
210 x 300 x 240mm
FUEL CONSUMPTION
SAFETY INTERLOCK 180ml/min with H2/He (40%/60%)
Fuel shuts off if flame goes out 35ml/min for H2

Authorised Representative:

Signal Group Ltd


Standards House, Doman Road, Camberley, Surrey GU15 3DF
United Kingdom

www.signal-group.com Tel: +44 (0)1276 682841 Email: sales@signal-group.com

You might also like