Brushless DC Flat Motors

90ECF 0.1
Ø 90 mm • 22-pole • 260 W
24.9-0.4
40 Max.
3 X M5 X 5.8 deep 0.1
5.4-0.2
Ø0.2 A
(6.5)
0.05 A
Ø65
0°

A
12

Ø90±0.1

Ø35 -0.05
0

(59)
0.01
Ø10 -0.02
(15)

(12.8)
Pin 1 (40) Molex connector
Dimensions in mm Pin 5 Mfg P/N: 46015-0806

90ECF40 8B xx
Electrical Data Symbol Unit
34 13
1 Nominal Voltage UN 48 18 Volt
2 Optimization Direction - Symmetrical Symmetrical -
3 No Load Speed n0 2,000 1,922 rpm
4 Typical No Load Current I0 250 733 mA
5 Max. Continuous Mechanical Power (@25°C) Pmax 260 260 W
6 Max. Continuous Current Ie max 4.1 12.1 A
7 Max. Continuous Torque Me max 1000 (140.2) 1080 (154.3) mNm (oz-in)
8 Back EMF Constant kE 24.5 9.37 V/1000 rpm
9 Torque Constant kM 225 (31.86) 89.47 (12.67) mNm/A (oz-in/A)
10 Motor Regulation R/k2 0.0152 0.0125 103/Nms
11 Motor Regulation k/R½ 256 (36.3) 283 (40) mNm/W½ (oz-in/W½)
12 Internal Resistance - phase to phase RI 0.77 0.1 ohms
13 Line to Line Resistance at Connectors RL 0.78 0.114 ohms
14 Inductance Phase to Phase L 1.07 0.14 mH
15 Mechanical Time Constant τm 7 6.1 ms
16 Electrical Time Constant τe 1.34 1.4 ms

General Data
17 Maximum Motor Speed nmax 5,000 rpm
18 Ambient Working Temperature Range - -40 to +100 (-40 to +212) °C (°F)
19 Ambient Storage Temperature Range - -40 to +100 (-40 to +212) °C (°F)
20 Ball Bearings Preload - 90 N
21 Axial Static Force w/o Shaft Support (max) - 50 N
22 Maximum Winding Temperature - 125 (257) °C (°F)
23 Thermal Resistance Rth 3.5 °C/W
24 Thermal Time Constant τw 270 s
25 Weight - 960 (34) g (oz)
26 Rotor Inertia J 5083 g-cm2
27 Hall Sensor Electrical Phasing* - 120 Electrical °
*Also available without Hall sensors

Pad Allocation No load speed for each coil Max. continuous operation at 25°C
5,000
5,000
No load speed (rpm)

Pad 1 Hall sensor 1

13 V 4,000
Pad 2 Hall sensor 2 4,000
Speed (rpm)

Pad 3 4.5 to 24V DC 3,000 3,000

Pad 4 Phase 3 260 W

2,000 2,000
34 V
Pad 5 Hall sensor 3
1,000 1,000
Pad 6 GND Continuous
Pad 7 Phase 1 0 Short time
0
0 20 40 60 0 200 400 600 800 1000 1200 1400
Pad 8 Phase 2 Power supply voltage (V) Torque (mNm)

58 V012024 • © 2024 Portescap. Specifications subject to change without notice.