HAITIAN PLASTICS MACHINERY GROUP CO.

, LTD
No. 1688 Haitian Road, Xiaogang, Beilun, Ningbo, P. R. China.
+ 86-574-8617 7005 (China)
+ 86-574-8617 7242 (International)
haitian@mail.haitian.com
www.haitianpm.com

NINGBO HAITIAN HUAYUAN MACHINERY CO.,LTD.

No.1, Nanhuan Road, Export Processing Zone, Beilun, Ningbo, Zhejiang, 315806 P.R. China
+86-574-8617 7242
+86-574-8622 1864
haitian@mail.haitian.com
www.haitianpm.com

HAITIAN JU/SE SERIES

HT 20210611-CV

Servo hydraulic two-platen solution

4,500 - 40,000 kN

COMMUNICATION. EFFICIENCY.

INNOVATION.

TECHNOLOGY TO THE POINT

HAITIAN JU/SE SERIES . 4,500-40,000kN

SPECIFICATIONS
JU4500/2400SE JU5500/3100SE JU6500/4300SE
INJECTION UNIT A B C D A B C D A B C D
Screw diameter mm 65 70 75 80 70 80 85 90 80 85 90 100
Screw L/D ratio L/D 21.5 20 18.7 17.5 22.9 20 18.9 17.8 22 20.7 19.6 17.6
Injection volume (theoretical) cm3 1068 1239 1423 1619 1424 1860 2100 2354 2212 2497 2799 3456
Injection weight (PS) g 972 1128 1295 1473 1296 1692 1911 2142 2013 2272 2547 3145
Injection rate g/s 304 353 405 461 383 501 565 634 492 555 623 769
Injection pressure MPa 223 192 167 147 218 167 148 132 193 171 153 124
Plasticizing rate (GPPS)① g/s 60.0 68.8 77.8 86.4 71.2 93.8 103 116 73.6 81.4 92.6 113
Plasticizing rate (HDPE)② g/s 85.7 102 114 129 102 137 155 179 107 118 134 165
Screw speed rpm 225 220 165
CLAMPING UNIT
Clamping force kN 4500 5500 6500
Dist. between tie bars (H×V) mm 810×800 920×830 1040×910
Mold height max. mm 850 900 950
Mold height min. mm 350 350 400
Ejector stroke mm 250 250 250
Ejector force kN 110 110 110
Max. daylight mm 1400 1650 1750
Mold opening stroke③ mm 1050/550 1300/750 1350/800
Max. mold weight④ t 6.5 8 9.5
OTHERS
Pump motor power kW 45 55 65
Heater power kW 33 39 48
Machine dimension (L×W×H) ⑤ m 6.87×2.17×2.34 7.20×2.35×2.37 7.74×2.58×2.67
Machine weight t 18 21 24
Hopper capacity (Options) kg 50 50 100
Oil tank ⑥ l 450 520 590
1090 1280 1400
810 920 1040

60XM20 L45
12XØ40 12XØ40 60XM24 L50
12XØ40 40XM20 L45 8XØ58 8XØ58
Ø120 Ø120
Ø120

50
50

1350
Platen dimensions
50

910
1260
830

75
100
1180

75
100
A
800

140

175
100

200
210

245
Moving platen

200
140

280

315
210
200

350

350
350

385
280

420

455
350

490
A

525
420
A

560

595
A

490
560
A-A A-A
A-A 50 140 50 175
50 140 (41)
(41) 75 245 (52)
75 210
100 210 100 315
280 100 280 200 385
200
200 350 350 455

36

22
350

46

28
36

22
350 420 525
420 595
490
490 16 25
560 20 32
16 25

550 600 660

50 50 50

35 140 35 140 70 105 105

140

140

210
Platen dimensions
Mounting hole for robot/sprue picker top
view from fixed platen
350

420

420
Ø4

Ø4

Ø4
Ø160

Ø160

Ø200
SR15 SR15 SR15

10XM20 L45 10XM20 L45 14XM24 L50

550 350-850 750 350-900 800 400-950

6866 (2168) 7193 (2350) 7731 (2580)

2774 1619 1084 1084 3056 1836 1175 1175 3191 2085 1290 1290
Mounting plane of fixed platen Mounting plane of fixed platen Mounting plane of fixed platen

Machine dimensions

2066 (Top of the upper tie bar)

2016 (Top of the upper tie bar)
1986(Top of the upper tie bar)

2670
2165 (EU Robot)
2070 (EU Robot)

2110 (EU Robot)

2200
2300

2369

2250
2338

1450
1450
1450

70
70
70

520 6483 190 1382 710 6755 266 1542

540 6136 190 1248

We reserve the right to make changes as NOTE: ① Plasticizing capacity (GPPS): GB standard, with application of GPPS plasticizing capacity of 3-zone screws. ④ moving platen: 2/3 of max. mold weight.
a result of further technical advantages. ② Plasticizing capacity (HDPE): Euromap 19, with application of HDPE plasticizing capacity of barrier screws The above plasticizing capacity is for reference only. ⑤ The size is the net size of the machine, excluding the width of feeding platform stair and the width of operating platform.
③ with min. mold height / with max. mold height. ⑥ The oil tank volume refers to the volume of the oil tank itself, excluding the volume in cylinder and pipeline. In this sense,
the customer is advised to prepare the hydraulic oil according to 1.35 times of the oil tank volume.

2 3
HAITIAN JU/SE SERIES . 4,500-40,000kN

SPECIFICATIONS
JU7500/5050SE JU9000/6500SE JU10800/8550SE
INJECTION UNIT A B C D A B C D A B C D
Screw diameter mm 80 90 100 110 90 100 110 120 100 110 120 130
Screw L/D ratio L/D 24.8 22 19.8 18 24.4 22 20 18.3 24.2 22 20.2 18.6
Injection volume (theoretical) cm3 2262 2863 3534 4276 2990 3691 4467 5316 4006 4847 5768 6769
Injection weight (PS) g 2058 2605 3216 3892 2721 3359 4065 4837 3645 4410 5249 6160
Injection rate g/s 484 612 756 915 569 703 850 1012 713 863 1027 1205
Injection pressure MPa 223 176 143 118 218 176 146 122 213 176 148 126
Plasticizing rate (GPPS)① g/s 73.3 92.0 113 133 89.5 110 130 152 101 121 140 161
Plasticizing rate (HDPE)② g/s 108 137 169 199 132 162 193 224 147 177 201 231
Screw speed rpm 150 135 116
CLAMPING UNIT
Clamping force kN 7500 9000 10800
Dist. between tie bars (H×V) mm 1110×960 1180×1000 1260×1100
Mold height max. mm 950 1100 1200
Mold height min. mm 450 500 500
Ejector stroke mm 300 300 350
Ejector force kN 195 195 230
Max. daylight mm 1850 2100 2400
Mold opening stroke③ mm 1400/900 1600/1000 1900/1200
Max. mold weight④ t 11 13 16
OTHERS
Pump motor power kW 75 85 112
Heater power kW 54 71 83
Machine dimension (L×W×H) ⑤ m 8.54×2.86×2.69 9.12x3.12x2.84 9.78×3.20×2.85
Machine weight t 28 35 42
Hopper capacity (Options) kg 100 100 100
Oil tank ⑥ l 730 830 910
1510 1560 1700
1110 1180 1260

12XØ40 8XØ40
12XØ40
8XØ58 16XØ58 A
76XM24 L50 8XØ58
Ø120 88XM24 L50
Ø120 A
Ø120 76XM24 L50

50

75
50
50

Platen dimensions

1660
1100
1440
960

75
100

125
1520
1000
100

175
75

200

210
200
245
175
A
200

315
Moving platen

315
245

350
350

420
385
A

315

490
455

500
350

385

525

560
A

455

630
595
A

525

700
665
595

770
665
A-A A-A A-A
50 50 210
50 175 (52) 75 315
(52) 75 175 (52)
75 245 125 420
100 315 100 245 200 490
200 385 200 315 350 560
350 385 500 630

28
46

46

28
28
46
350 455
455 700
525 525 770
595 595
665 20 32 665 20 32 20 32

750 750 840

50 50 50

70 105 105 105 105 70 105105 105

70
210

280
Platen dimensions

280
Mounting hole for robot/sprue picker top
view from fixed platen
420

560
Ø4

Ø6
420
Ø6
Ø200

Ø200
Ø200
SR15 SR20 SR20

14XM24 L50 15XM24 L50 19XM24 L50

900 450-950 1000 500-1100 1200 500-1200

8533 (2860)
9111 (3104) 9772 (3191)
3450 2258 1506 1354
3857 2491 1627 1477 4014 2734 1671 1520

Mounting plane of fixed platen Mounting plane of fixed platen

Mounting plane of fixed platen

Machine dimensions

2351(Top of the upper tie bar)

2286(Top of the upper tie bar)
2106(Top of the upper tie bar)

2398(EU Robot)

2470(EU Robot)
2840
2208(EU Robot)

2850
2685

2200

2247
2262

1590
1590
1450

70
70

70

(932) 7872 296 1766 （748） 8566 326 1821

（820） 7434 279 1627

We reserve the right to make changes as NOTE: ① Plasticizing capacity (GPPS): GB standard, with application of GPPS plasticizing capacity of 3-zone screws. ④ moving platen: 2/3 of max. mold weight.
a result of further technical advantages. ② Plasticizing capacity (HDPE): Euromap 19, with application of HDPE plasticizing capacity of barrier screws The above plasticizing capacity is for reference only. ⑤ The size is the net size of the machine, excluding the width of feeding platform stair and the width of operating platform.
③ with min. mold height / with max. mold height. ⑥ The oil tank volume refers to the volume of the oil tank itself, excluding the volume in cylinder and pipeline. In this sense,
the customer is advised to prepare the hydraulic oil according to 1.35 times of the oil tank volume.

4 5
HAITIAN JU/SE SERIES . 4,500-40,000kN

SPECIFICATIONS
JU12000/8550SE JU13000/11200SE JU14000/11200SE
INJECTION UNIT A B C D A B C D A B C D
Screw diameter mm 100 110 120 130 110 120 130 140 110 120 130 140
Screw L/D ratio L/D 24.2 22 20.2 18.6 26.2 24 22.2 20.6 26.2 24 22.2 20.6
Injection volume (theoretical) cm3 4006 4847 5768 6769 5227 6220 7300 8467 5227 6220 7300 8467
Injection weight (PS) g 3645 4410 5249 6160 4756 5661 6643 7705 4756 5661 6643 7705
Injection rate g/s 713 863 1027 1205 784 933 1095 1269 784 933 1095 1269
Injection pressure MPa 213 176 148 126 214 180 153 132 214 180 153 132
Plasticizing rate (GPPS)① g/s 101 121 140 161 123 142 164 187 123 142 164 187
Plasticizing rate (HDPE)② g/s 147 177 201 231 187 217 240 273 187 217 240 273
Screw speed rpm 116 105 105
CLAMPING UNIT
Clamping force kN 12000 13000 14000
Dist. between tie bars (H×V) mm 1300×1200 1380×1280 1460×1360
Mold height max. mm 1250 1350 1450
Mold height min. mm 600 600 700
Ejector stroke mm 350 350 400
Ejector force kN 230 230 330
Max. daylight mm 2650 2850 3050
Mold opening stroke③ mm 2050/1400 2250/1500 2350/1600
Max. mold weight④ t 20 23 27
OTHERS
Pump motor power kW 112 130 130
Heater power kW 83 104 104
Machine dimension (L×W×H) ⑤ m 10.07x3.26x2.91 11.23×3.36×3.19 11.60×3.44×3.27
Machine weight t 47 55 62
Hopper capacity (Options) kg 100 100 100
Oil tank ⑥ l 910 1250 1250
1860 1975 2072
1300 1380 1460
76XM24 L50

A 8XØ40
16XØ58
A 16XØ58
8XØ40
A
Ø200 84XM24 L50 A Ø200 80XM30 L65
8XØ40 16XØ58 A

1972

50
75
A
75
50

1360
Platen dimensions

75
50

140
210
140

200
125
1760
1200
500
350
200

210
280

280
125

350
1875
1280

500
140
125

420
420

210
Moving platen

200

280

560
420
Ø200

490

350
560

700
560
500
700

840
700
840

840
50 140 A-A 50 140
(52) 140 A-A A-A
75 210 50 75 210
125 280 210 (52) (66)
75 125 280
200 420 125 280

28
46

200 420
350 490 200 420 560

60
350

36
46

28
500 560 20 32 350 560 500 700
700 500 700 840
25 41
840 840 20 32 980

840 900 900

50 50 50

70 105105 105 70 140140 140 70 140140 140

280

280

280
Platen dimensions
Mounting hole for robot/sprue picker top
view from fixed platen
560

560

560
Ø6

Ø6

Ø6
Ø200

Ø200

Ø200
SR20 SR20 SR20

19XM24 L50 19XM24 L50 19XM24 L50

1400 600-1250 1500 600-1350 1600 700-1450

10065 (3256) 11230 (3362) 11597 (3432)

4307 2734 1703 1553 4639 3190 1756 1606 4951 3190 1791 1641

Mounting plane of fixed platen Mounting plane of fixed platen

Mounting plane of fixed platen
2626 (Top of the upper tie bar)
2471(Top of the upper tie bar)

Machine dimensions

2756 (Top of the upper tie bar)

2770 (EU Robot)
2610 (EU Robot)

2910 (EU Robot)

2910

3185

3265
2248

2250

2250
1650

1750

1830
70
70

8961 (843) 10059

70
（756） 326 1896 328 2002 920 10349 328 2072

We reserve the right to make changes as NOTE: ① Plasticizing capacity (GPPS): GB standard, with application of GPPS plasticizing capacity of 3-zone screws. ④ moving platen: 2/3 of max. mold weight.
a result of further technical advantages. ② Plasticizing capacity (HDPE): Euromap 19, with application of HDPE plasticizing capacity of barrier screws The above plasticizing capacity is for reference only. ⑤ The size is the net size of the machine, excluding the width of feeding platform stair and the width of operating platform.
③ with min. mold height / with max. mold height. ⑥ The oil tank volume refers to the volume of the oil tank itself, excluding the volume in cylinder and pipeline. In this sense,
the customer is advised to prepare the hydraulic oil according to 1.35 times of the oil tank volume.

6 7
HAITIAN JU/SE SERIES . 4,500-40,000kN

SPECIFICATIONS
JU16000/16600SE JU18500/16600SE JU21000/20200SE
INJECTION UNIT A B C A B C A B C D
Screw diameter mm 130 140 150 130 140 150 140 150 160 170
Screw L/D ratio L/D 24 22.3 20.8 24 22.3 20.8 24 22.4 21 19.8
Injection volume (theoretical) cm3
cm3 8362 9698 11133 8362 9698 11133 10468 12017 13672 15435
Injection weight (PS) g 7610 8825 10131 7610 8825 10131 9526 10935 12442 14046
Injection rate g/s 1184 1373 1576 1184 1373 1576 1302 1495 1701 1920
Injection pressure MPa 199 171 149 199 171 149 193 168 148 131
Plasticizing rate (GPPS)① g/s 168 192 220 168 192 220 155 176 196 222
Plasticizing rate (HDPE)② g/s 252 283 336 252 283 336 243 294 303 334
Screw speed rpm 102 102 85
CLAMPING UNIT
Clamping force kN 16000 18500 21000
Dist. between tie bars (H×V) mm 1550×1450 1650×1550 1800×1600
Mold height max. mm 1550 1600 1700
Mold height min. mm 700 750 800
Ejector stroke mm 400 450 450
Ejector force kN 330 450 450
Max. daylight mm 3250 3350 3500
Mold opening stroke③ mm 2550/1700 2600/1750 2700/1800
Max. mold weight④ t 33 40 50
OTHERS
Pump motor power kW 167 167 185
Heater power kW 116 116 133
Machine dimension (L×W×H) ⑤ m 12.38×3.64×4.38 12.58×3.85×4.52 12.91×3.97×4.34
Machine weight t 74 86 99
Hopper capacity (Options) kg 100 100 100
Oil tank ⑥ l 1550 1550 1750
2200 2310 2540
1550 1650 1800

8XØ40
24XØ58
Ø250 92XM30 L65 50 36XM30 L65
Ø2 50
2100
1450

Ø2 60XM30 L65

50
75
50
75

75
2210
1550

2340
1600
Platen dimensions

140
125
200
150

125

140
140

150

280
280
150
125
200
500
350

280

420
350

350
650

420

500
560
500

560
420
Moving platen A

490

650

650
560

700
700
A

840

840
700
A

980
840

980

1120
A

980
24XØ58
24XØ58
8XØ40

50 140 A-A 140

50 140 75
A-A
A-A 75 280 125 280
75 280
66 125 420 150 420
125 420

60

36

60

36
150 560 350 560
150 490
200 700 500 700
25 41
60

36
200 560 350 840 25 41 650 840
350 700 500 980 980
500 840 650 1120
25 41
650 980

1050 1050 1050

50 50 50
140 140
70 140140 140 70 140 140 140 70 140 140 140
280

280

280
Platen dimensions
Mounting hole for robot/sprue picker top
view from fixed platen
700

840

840
Ø8

Ø8

Ø8
Ø250

Ø250

Ø250
SR20 SR20 SR20

19XM24 L50 23XM24 L50 23XM24 L50

1700 700-1550 1750 750-1600 1800 800-1700

12374 (3644)
12574 (3848)
5121 3454 1947 1697 12908 (3968)
5321 3454 2049 1899
2519 3727 2109 1859
2519
5471 2794

Mounting plane of fixed platen Mounting plane of fixed platen

Machine dimensions Mounting plane of fixed platen

2856 (Top of the upper tie bar)

3056 (Top of the upper tie bar)

3136(Top of the upper tie bar)

4378
3000(EU Robot)

4513
3225 (EU Robot)

4338
3310(EU Robot)
2270

2270
1870

2270
2005

2045
90

90

855

90
855 10896 285 2184 11146 285 2390 734 11889 285 2442

We reserve the right to make changes as NOTE: ① Plasticizing capacity (GPPS): GB standard, with application of GPPS plasticizing capacity of 3-zone screws. ④ moving platen: 2/3 of max. mold weight.
a result of further technical advantages. ② Plasticizing capacity (HDPE): Euromap 19, with application of HDPE plasticizing capacity of barrier screws The above plasticizing capacity is for reference only. ⑤ The size is the net size of the machine, excluding the width of feeding platform stair and the width of operating platform.
③ with min. mold height / with max. mold height. ⑥ The oil tank volume refers to the volume of the oil tank itself, excluding the volume in cylinder and pipeline. In this sense,
the customer is advised to prepare the hydraulic oil according to 1.35 times of the oil tank volume.

8 9
HAITIAN JU/SE SERIES . 4,500-40,000kN

SPECIFICATIONS
JU21000/28900SE JU24000/41000SE JU28000/52000SE
INJECTION UNIT A B A B
Screw diameter mm 160 170 170 185 200
Screw L/D ratio L/D 24 22.6 23.5 21.6 20
Injection volume (theoretical) cm3 17492 19747 23379 27687 35186
Injection weight (PS) g 15918 17970 21275 25195 32019
Injection rate g/s 1520 1716 1441 1707 2029
Injection pressure MPa 165 147 174 147 148
Plasticizing rate (GPPS)① g/s -- -- -- -- --
Plasticizing rate (HDPE)② g/s 330 365 309 320 380
Screw speed rpm 280 310 70 70
CLAMPING UNIT 72
Clamping force kN 21000 24000 28000
Dist. between tie bars (H×V) mm 1800×1600 1900×1700 2000×1800
Mold height max. mm 1700 1800 2000
Mold height min. mm 800 800 800
Ejector stroke mm 450 500 500
Ejector force kN 450 450 450
Max. daylight mm 3500 3800 4100
Mold opening stroke③ mm 2700/1800 3000/2000 3300/2100
Max. mold weight④ t 50 59 66
OTHERS
Pump motor power kW 185 205 255
Heater power kW 174 215 215
Machine dimension (L×W×H) ⑤ m 13.90×3.97×4.35 15.15×4.19×4.46 15.97×4.28×4.42
Machine weight t 103 127 148
Hopper capacity (Options) kg 100 100 100
Oil tank ⑥ l 1920 2390 2900
2540 2672 2820
1800 1900 2000
80XM30 L65

50 68XM30 L65
50 Ø2 Ø2
Ø2

75
60XM30 L65 50

2472
1700
75

1800

75
125

2620
140
280
150
200
2340
1600

Platen dimensions

350

420
125

140
150

280

500

125
150

140
280
560

200
420

650
350

350
700

420
500

560
A

500
840

650
Moving platen A 28XØ58
650

560
980
700

1120

700
A

840
A

840
980

980
1120

1120
1260
28XØ58
24XØ58

75 140
A-A
75 140 125 280 75 140
A-A 125 280
125 280 150 420
150 420 A-A
560

60

36
150 420 350
350 560 (66)
60

36
500 700
350 560 500 700
650 840 25 41
500 700 650 840

60

36
650 840 25 41 800 980
800 980
980 1120 1120
1120 25 41
1260 1260

1120 1300
1050 50 50
50
140 140 140 140
140 70 140 140 140 70 140 140 140
70 140 140 140

280

280
280

Platen dimensions
Mounting hole for robot/sprue picker top
view from fixed platen

Ø10

Ø10
980

980
840
Ø8

Ø250

Ø250
Ø250

SR20 SR20
SR20

27XM24 L50 28XM24 L50

23XM24 L50
2000 800-1800 2100 800-2000
1800 800-1700

13896 (3968) 15147 (4188) 15961 (4284)

4220 2109 1859 4576 2219 1969
5471 3287 4575 2267 2017
5917 3642
6335 3472
Machine dimensions Mounting plane of fixed platen Mounting plane of fixed platen Mounting plane of fixed platen

3546(Top of the upper tie bar)

3366(Top of the upper tie bar)
3136(Top of the upper tie bar)

3725(EU Robot)
3570(EU Robot)
4348
3310(EU Robot)

4420
4453
2270

2270

2310

2270
2200
2045

90

90
90

734 12877 285 2442 801 13973 285 2672 915 14740 306 2767

We reserve the right to make changes as NOTE: ① Plasticizing capacity (GPPS): GB standard, with application of GPPS plasticizing capacity of 3-zone screws. ④ moving platen: 2/3 of max. mold weight.
a result of further technical advantages. ② Plasticizing capacity (HDPE): Euromap 19, with application of HDPE plasticizing capacity of barrier screws The above plasticizing capacity is for reference only. ⑤ The size is the net size of the machine, excluding the width of feeding platform stair and the width of operating platform.
③ with min. mold height / with max. mold height. ⑥ The oil tank volume refers to the volume of the oil tank itself, excluding the volume in cylinder and pipeline. In this sense,
the customer is advised to prepare the hydraulic oil according to 1.35 times of the oil tank volume.

10 11
HAITIAN JU/SE SERIES . 4,500-40,000kN

SPECIFICATIONS
JU33000/61000SE JU40000/94000SE
INJECTION UNIT
Screw diameter mm 220 240
Screw L/D ratio L/D 20.5 23
Injection volume (theoretical) cm3 45616 60168
Injection weight (PS) g 41510 54753
Injection rate g/s 2243 2694
Injection pressure MPa 134 156
Plasticizing rate (GPPS)① g/s -- --
Plasticizing rate (HDPE)② g/s 370 470
Screw speed rpm 53 50
CLAMPING UNIT
Clamping force kN 33000 40000
Dist. between tie bars (H×V) mm 2270×1900 2400×2000
Mold height max. mm 2000 2200
Mold height min. mm 1000 1000
Ejector stroke mm 550 550
Ejector force kN 580 580
Max. daylight mm 4200 4460
Mold opening stroke③ mm 3200/2200 3460/2260
Max. mold weight④ t 75 86
OTHERS
Pump motor power kW 255 375
Heater power kW 223 290
Machine dimension (L×W×H) ⑤ m 17.14×4.64×4.46 19.45×5.23×4.49
Machine weight t 182 225
Hopper capacity (Options) kg 100 100
Oil tank ⑥ l 2900 4000
3175 3320
2270 2400
100XM36 L80 136XM36 L80

Ø2 A Ø A
25
50 A 0 A

75
75

2920
2000
2805
1900

125
150
125

140
200
150

280
140
200

280

350
Platen dimensions

420
350

420
32XØ58

500

560
32XØ58
500

560

650

700
650

700

840
800
840
800

980
980
Moving platen

1120
1120

1260
1260

1400
75 140
75 140
125 280
125 280 A-A A-A
150 420
150 420 (82)
200 560 (82)
200 560
350 700
350 700

72

42
500 840

42
72
500 840
650 980
650 980 35 47 800 1120 35 47
800 1120
1260
1260
1400
1400
1540

1390 1480
50 50
140 140 140 140
70 140 140 140 70 140 140 140
280

280
Platen dimensions
Mounting hole for robot/sprue picker top
view from fixed platen
Ø10

Ø10
1120

1120
Ø250

Ø250
SR20 SR20

27XM24 L50 27XM24 L50

2200 1000-2000 2260 1000-2200

17136 (4642) 19449 (5226)

6590 4936 2446 2196 6935 6146 2613 2613
4091 5311
Mounting plane of fixed platen
Mounting plane of fixed platen

3951(Top of the upper tie bar)

3786(Top of the upper tie bar)

Machine dimensions
3995(EU Robot)

4185(EU Robot)

4487
4463

2550
2470

2290
2270

90
90

960 15590 305 3126 955 17423 305 3260

We reserve the right to make changes as NOTE: ① Plasticizing capacity (GPPS): GB standard, with application of GPPS plasticizing capacity of 3-zone screws. ④ moving platen: 2/3 of max. mold weight.
a result of further technical advantages. ② Plasticizing capacity (HDPE): Euromap 19, with application of HDPE plasticizing capacity of barrier screws The above plasticizing capacity is for reference only. ⑤ The size is the net size of the machine, excluding the width of feeding platform stair and the width of operating platform.
③ with min. mold height / with max. mold height. ⑥ The oil tank volume refers to the volume of the oil tank itself, excluding the volume in cylinder and pipeline. In this sense,
the customer is advised to prepare the hydraulic oil according to 1.35 times of the oil tank volume.

12 13