Multiflo® RF-420EXHV Dewatering Pump

Technical Specifications
Minerals


Features
• Heavy duty, solids handling
dewatering pump
• Close coupled pump assembly
ensuring accurate pump
alignment
• Auto vacuum pump priming system
• Built to withstand harsh dewatering
conditions
• Compact heavy duty pump unit
base with inbuilt baffled fuel cell
• Heavy duty engine canopy
• Lift points (4)
• Two-pack epoxy paint system
• Pump shaft fitted with a stainless
steel shaft sleeve
• Comprehensive installation,
operations and spare parts manual

Rugged, tough and reliable Standard Inclusions

• Stainless steel bare shaft pump
Introducing the new Multiflo® RF range of mine dewatering pump units.
• Caterpillar** C27 diesel engine
The new diesel driven Multiflo® RF dewatering pump incorporates a robust, heavy duty
base which features an auto vacuum priming system and an inbuilt skid, all within a • Skid runners fitted with 25mm wear
compact design. plates
The RF range has been developed to operate in harsh environments and is suited to • Kensho** electronic control panel
mining, quarrying, industrial, water transfer and environmental water management
• Stainless steel, heavy duty
applications.
non-return valve
The Multiflo® 420EXHV is a heavy duty, solids handling dewatering pump capable of
• Auto priming system
producing high volume flow at extra high heads while maintaining high efficiency.
• Exhaust system heat shielding
The Multiflo® RF-420EXHV unit provides a wide range of standard inclusions and a
comprehensive selection of optional features to suit your dewatering needs. • LED flashing amber light
• LED work lights (2)
• Two emergency stops
• Starter motor and battery isolators
• Vented steel battery box with lid
• Low flow protection
• Fuel gauge
• Engine oil drain
 Multiflo® RF-420EXHV dewatering pump operating curve
Options

• Caterpillar** C18 diesel engine

• Caterpillar** C32 diesel engine
• Cummins** QSK23 diesel engine
• Cummins** QST30 diesel engine
• Kensho** K37 electronic control panel
• Galvanised suction strainer
• Hydrau-Flo® non-pressurised fuel filling
valve
• Double discharge
• Full stainless steel suction and
discharge arrangements
• Suction Linatex® hose and boom kit
• Booster arrangement
• Suction and discharge pressure
gauges
• Telemetry
Multiflo® RF-420EXHV dewatering pump - technical data
• Auto start/stop
Dry Weight 13500kg
• Jump start terminal
Passage Size 58mm
• Fire extinguisher
Shaft Sealing Gland packed
• Highwall float fuelling
Engine Type Caterpillar** C27
• LED work lights (4 or 6)
Engine Power 597kW
• Flow meter
Material - Casing and Impeller AS 2074 H7A cast stainless steel
• Bolt-on push bar
Material - Shaft E05 - 1045 carbon steel
• Pontoon
Material - Shaft Sleeve C21 - 420C stainless steel
• Bunded fuel base*
• Sound attenuated canopy* Unit Connections

• Additional customised options* Suction

* Non-standard options available upon DN 400mm

request Flange Specification Table E

Discharge

DN 200mm

Flange Specification ANSI 300

3450

P.T. Weir Minerals Indonesia

JL. Mulawarman No. 020 RT 020
Manggar, Balikpapan 76116
East Kalimantan
Tel: +62 542 746098 5960 2646

Weir Minerals Australia - Coolum

15 Dacmar Road
Coolum Beach
Copyright © 2017, Weir Minerals Australia Ltd. All rights reserved. MULTIFLO and HYDRAU-FLO are trademarks and/or registered
Queensland 4573 trademarks of Weir Minerals Australia Ltd; LINATEX is a trademark and/or registered trademark of Linatex Limited; WEIR and
NOTE: FOR DRAWING, FABRICATION AND ASSEMBLY STANDARDS REFER TO

Tel. +61 (0)7 5449 3000 -

WEIR (logo) are trademarks and/or registered trademarks of Weir Engineering Services Ltd. Certain features of the technology
WEIR MINERALS MULTIFLO ENGINEERING DEPARTMENT STANDARDS AND PROCEDURES.
- - - - WELD CAT.
- - featured in this publication may be protected by - pending
MASS:-13218.1 kg and granted patents in the name of The Weir Group PLC and/or one of
- - FINISH CODE

RF-420EX
A3
Copyright © Weir Minerals Australia Ltd. 2017
- - DO NOT SCALE - - - - SCALE 1 : 35 U.N.O. 3rd ANGLE PROJECTION U.N.O.
its subsidiaries. ** CATERPILLAR, CUMMINS
IF IN DOUBT - ASK and KENSHO are not trademarks belonging to any company forming part of The
Weir Minerals Austalia Ltd. ("the Company") is the owner of the copyright and all confidential information in this drawing.
The drawing must not be copied in whole or in part, in any form or by any means, and the information in it must not be
- - - - - - disclosed to any person, or used for any purpose other than the specific purpose for which it has been provided,
DESIGN J.A 02.02.16 DRAWING STATUS

multiflo@mail.weir
without the prior written consent of the Company.
®
WORK IN PROGRESS
Weir Group PLC. AU0855/082017
- - - - - - MULTIFLO DRAWN A.R 18.05.17
ASSEMBLY STEEL DISCHARGE
MINE DEWATERING SOLUTIONS
Mine Dewatering Solutions
HYDRAU-FLO
®
15 Dacmar Road Coolum Beach, QLD 4573 Australia
00 APPROVED FOR CONSTRUCTION AS PER APPROVALS Safety Solutions for Liquid Filling CHECK - - Drawing Number REV
Telephone: +617 5449 3000 Facsimile: +617 5446 4304
MF249203 P0
®
ASPIR

www.minerals.weir
No. Description DWN CHK APPD DATE Coal Processing Solutions Email: multiflo@weirminerals.com Web: www.weirminerals.com APPD - - SHEET 1 OF 1