Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 5 views

    Final P2-HydraulicCylinderProject - 18S-Layout1

    Uploaded by

    Pavan Patel

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Final P2-HydraulicCylinderProject - 18S-Layout1

    Uploaded by

    Pavan Patel
    5 views1 page

    Original Title

    final P2-HydraulicCylinderProject_18S-Layout1

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    5 views1 page

    Final P2-HydraulicCylinderProject - 18S-Layout1

    Uploaded by

    Pavan Patel

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    2.

    75

    16.130

    4.25

    5.00

    2.875

    17.625

    FANSHAWE COLLEGE
    NOTE :- CYLINDER SPECIFICATION :- SCALE: 1:2.5 DRAWN BY: PAVANKUMAR PATEL
    (1). Shot blast cylinder heads after welding and before machining. (1) 3 " BORE x 8" STROKE
    (2). Cover/protect all running and sliding surfaces before painting. (2). SEE DIMENSIONS FOR MOUNTING OF 165 " SHCS DATE: 11/04/2024 INSTRUCTOR: PROF. MARK DENIJS
    Spray paint 1 coat of CIL #2503 plus two coats of CIL #3573 for a total buildup not to exceed 0.005 inches. (3). CYLINDER CAPACITY @ 12G.P.M. /1350 P.S.I. CHECKED BY: PROF. MARK DENIJS
    (3). Torque on tie rods (a) FORCE DEV. @ ROD = 13,933 LBS. EXTEND.
    (b) FORCE DEV. @ ROD=12,873 LBS. RETRACT
    TOLERANCE UNLESS OTHERWISE SPECIFIED
    (4). Apply Loctite compound to tie rod threads and retaining plate cap screws.
    (c) PISTON ROD VELOCITY = 4.48 IN/SEC EXTEND 1 DECIMAL ±0.30 1 DECIMAL ±0.015
    (d) PISTON ROD VELOCITY = 4.84 IN/SEC RETRACT 2 DECIMALS ±0.15 2 DECIMALS ±0.010
    3 DECIMALS ±0.05 3 DECIMALS ±0.005
    ST.NO. : 1253031 ANGLE ± 1/2° ANGLE ± 1/2°
    SECTION NO. : 01 TITLE MILLIMETERS
    INCHES
    DRW. NO.
    ENGR 6005-011
    HYDRAULIC CYLINDER SHEET NO.
    1 OF 5

    You might also like