3 4

ITEM PART DESCRIPTION Default/ SHEET

NO. NUMBER QTY. NO.
1 1-00 Case Sub Assembly 1 2
2 2-00 Powertrain Sub Assembly 1 11
3 3-00 Cylinder Sub Assembly 1 26
1 4 4-00 Valve Sub Assembly 1 49
5 5-00 Piston Sub Assembly 1 56
6 6 6-00 Stephenson Link Sub Assembly 1 60
8 7 7-00 Handle Sub Assembly 1 69
Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Various metals

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Exploded view of the Marine Motor UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/2/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Chris Pratt DATE: 5/3/2012 PART #: 0-00 QTY: 1
X.XXX .002 FILE NAME: Stephenson Steam Engine.SLDASM SCALE: 1:9 SHEET: 1 OF 75
 ITEM NO. PART DESCRIPTION QTY. SHEET
NUMBER NO.
1 1-01 Case 1 4
2 1-02 Handle Support 1 8
3 1-03 Bushing 2 9
Main Bearing
4 1-04 Cap 2 10
1/4-28X1.5
7 5 1-05 Slotted Round
3 ---
Head Machine
Screw
6 1-06 1/-20 Hex Nut 1 ---
7/8-14X2.25 Hex
7 1-07 Head Bolt 4 ---

3 6 Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL:

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Case Assembly UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/2/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Jeremiah Schroeder DATE: 4/26/2012 PART #: 1-00 QTY: 1
X.XXX .002 FILE NAME: Case Assembly.SLDASM SCALE: 1:6 SHEET: 2 OF 75
 Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL:

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Case Assembly UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/2/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Jeremiah Schroeder DATE: 4/26/2012 PART #: 1-00 QTY: 1
X.XXX .002 FILE NAME: Case Assembly.SLDASM SCALE: 1:4.5 SHEET: 3 OF 75
 6.875

6.000
R1.750
21.625 R0.400

20.000 4X 0.453 1.150

17.670 1/2-20 UNF 1.000

16.750 R0.500
15.125
11.875
1.100

R0.299

5.250 3.631 R0.875

5.539 R1.625
7.000 6.250 R3.750
R6.125
12.750 R1.333

Front Team Jabberwocky

PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Gray Cast Iron
SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Case UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/1/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Jeremiah Schroeder DATE: 5/3/2012 PART #: 1-01 QTY: 1
X.XXX .002 FILE NAME: case.SLDPRT SCALE: 1:6 SHEET: 4 OF 75
 6.250
R0.750 A
3.625

0.500

2.125
R0.313
3.125
R0.250 A
20.750
R0.250 3.250
17.670 VIEW -
3X R2.250 SCALE 1 : 16
13.125
9.875
5.063
3.000 8.286 4.813
1.938
1.688

1.000
3X 0.500 R0.300
7.707 0.500
R5.125
R0.156

0.625
SECTION A-A R0.200
3X 1/4-28 UNF THRU ALL

Team Jabberwocky
Right PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Gray Cast Iron
SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Case UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/1/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Jeremiah Schroeder DATE: 5/3/2012 PART #: 1-01 QTY: 1
X.XXX .002 FILE NAME: case.SLDPRT SCALE: 1:6 SHEET: 5 OF 75
 0.125
1.125
B
R0.188 D

1.875
3.500 R0.353
R0.150
R0.125 B
R0.625 R0.271
R1.937
DETAIL D SCALE 1:16
SCALE 1 : 3
0.500

5.576
1.625
1.500

1.000

SECTION B-B

Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Gray Cast Iron
SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Case UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/1/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Jeremiah Schroeder DATE: 5/3/2012 PART #: 1-01 QTY: 1
X.XXX .002 FILE NAME: case.SLDPRT SCALE: 1:6 SHEET: 6 OF 75
 F F

1.557 E E

4X 7/8-14 UNF THRU ALL

SECTION E-E SCALE 1:16
(Above shaft supports)
0.500

R2.250

0.250
R2.250
R0.688

0.875 THRU SECTION F-F

(Through crosshead brace)
R5.625
Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING DIMENSIONS ARE IN INCHES
Marine Engine
45°
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO, THIRD ANGLE PROJECTION
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION Project
Bottom
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
PROHIBITED. MATERIAL: Gray Cast Iron
SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Case UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/1/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Jeremiah Schroeder DATE: 5/3/2012 PART #: 1-01 QTY: 1
X.XXX .002 FILE NAME: case.SLDPRT SCALE: 1:5 SHEET: 7 OF 75
 5.096
R6.400

R7.397
1/2-20 UNC
0.750
1.254
6.900
7.369
8.400
0.500
1.000
1.250
3.000

3X R2.250
9.53°

3X 0.250 THRU
0.500 0.140
0.500

Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast Alloy Steel

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Handle Support UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/1/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Jeremiah Schroeder DATE: 4/26/2012 PART #: 1-02 QTY: 1
X.XXX .002 FILE NAME: throttlesupport.SLDPRT SCALE: 1:3 SHEET: 8 OF 75
 2.875

1.750

Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING DIMENSIONS ARE IN INCHES
Marine Engine
2.000
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO, THIRD ANGLE PROJECTION
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Brass
SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Bushing UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/1/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Jeremiah Schroeder DATE: 4/25/2012 PART #: 1-03 QTY: 1
X.XXX .002 FILE NAME: bushing.SLDPRT SCALE: 1:1 SHEET: 9 OF 75
 1.250
R1.625
A
R1.000
1.875
1.250 R0.875
A

30° .250
collinear with face

3.375 2X 0.875 THRU ALL

3.113
1.688 2X 0.250
1.557 SECTION A-A

0.250
3.826
5.576

Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Gray Cast Iron

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Main Bearing Cap UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/1/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Jeremiah Schreoder DATE: 4/25/2012 PART #: 1-04 QTY: 2
X.XXX .002 FILE NAME: Mainbearingcaps.SLDPRT SCALE: 1:2 SHEET: 10 OF 75
 16 10

14
8

12
13
6

3
11
1

15 4
Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL:

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION:

UNIVERSITY
Powertrain Assembly, Vertical Steam Engine OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Jeremiah Schroeder DATE: 4/27/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Andrew Engel DATE: 5/1/2012 PART #: 2-00 QTY: 1
X.XXX .002 FILE NAME: Powertrain Assembly.SLDASM SCALE: 1:6 SHEET: 11 OF 75
 ITEM PART DESCRIPTION QTY. SHEET NO.
NO. NUMBER
1 2-01 Crankshaft 1 13
2 2-02 Flywheel 1 15
3 2-03 Crank Pin 1 16
Connecting Rod End
4 2-04 Cap 1 17
Connecting Rod Center
5 2-05 Block 1 18
6 2-06 Connecting Rod 1 19
7 2-07 Connecting Rod Insert 1 20
8 2-08 Slipper 1 21
9 2-09 Connecting Rod Pin 1 23
10 2-10 Slipper Guides 2 24
11 2-11 Collar half 2 25
12 2-12 Acorn Nut 0.2500-28-N 2 ---
13 2-13 Round Head BOLT 2 ---
0.25-20x2.75x.75-N
14 2-14 Hex NUT 0.2500-20-D-N 2 ---
15 2-15 Hex BOLT 0.375- 2 ---
24x1x1-N
16 2-16 Regular Lock Washer 2 ---
0.375
Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL:

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION:

UNIVERSITY
Powertrain Assembly, Vertical Steam Engine OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/2/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Andrew Engel DATE: 5/1/2012 PART #: 2-00 QTY: 1
X.XXX .002 FILE NAME: Powertrain Assembly.SLDASM SCALE: 1:6 SHEET: 12 OF 75
 8.875
6.7813
0.875 6.3125
12.000 0.188 5.3125

0.125
0.469
0.9375

2.250
3.750
4.000 2.875
4.750

1.750

R2.014
0.250
R0.250

Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast Alloy Steel
SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Crankshaft UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Jeremiah Schroeder DATE: 4/27/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Andrew Engel DATE: 4/25/2012 PART #: 2-01 QTY: 1
X.XXX .002 FILE NAME: Crankshaft.SLDPRT SCALE: 1:4 SHEET: 13 OF 75
 2.000

1.250

1.250

0.6875 0.6875

30°
30°

Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast Alloy Steel
SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Crankshaft UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Jeremiah Schroeder DATE: 4/27/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Andrew Engel DATE: 4/25/2012 PART #: 2-01 QTY: 1
X.XXX .002 FILE NAME: Crankshaft.SLDPRT SCALE: 1:1 SHEET: 14 OF 75
 R0.750

1.479
22.50°
0.500
2.500

R1.000
DETAIL A
SCALE 1 : 3 1.386 3.234

2.000
3.000
A

1.750
4.000
0.500
13.000

16.000
Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast Iron
SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Flywheel UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Jeremiah Schroeder DATE: 4/27/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Andrew Engel DATE: 4/26/2012 PART #: 2-02 QTY: 1
X.XXX .002 FILE NAME: Flywheel.SLDPRT SCALE: 1:6 SHEET: 15 OF 75
 3.375

2.000

Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Aluminum Bronze

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Connecting Rod Pin UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Jeremiah Schroeder DATE: 4/27/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Andrew Engel DATE: 4/25/2012 PART #: 2-03 QTY: 1
X.XXX .002 FILE NAME: Crank Pin.SLDPRT SCALE: 1:1 SHEET: 16 OF 75
 1.125
0.5625
0.125

0.4375

0.250
3.375
2.00
3.125

0.250 0.6875

0.125

2.125
R4.739

FILLETS
1.50 1.25 1.00 R1.250 R0.125 (TYP)

0.313
R1.081
Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast Alloy Steel

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Connecting Rod Cap UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Jeremiah Schroeder DATE: 4/27/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Andrew Engel DATE: 4/25/2012 PART #: 2-04 QTY: 1
X.XXX .002 FILE NAME: Connecting Rod End Cap.SLDPRT SCALE: 1:1.5 SHEET: 17 OF 75
 0.0625

3.375 1.250

0.4375
0.250
1.125
R0.125

1.375
1.000 0.125
R1.000
R1.250
0.563

Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast Alloy Steel

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Connecting Rod Center Block UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Jeremiah Schroeder DATE: 4/27/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Andrew Engel DATE: 4/26/2012 PART #: 2-05 QTY: 1
X.XXX .002 FILE NAME: Connecting Rod Center Block.SLDPRT SCALE: 1:1 SHEET: 18 OF 75
 0.250

R0.313
1.625
1.125

1.000
FIILLET 1.375
R0.250 (TYP) FILLET
R0.500

9.875 12.375
0.875
TAPER
1.53° (TYP)

5.188
FILLET
R1.000

0.500
1.125
3.375
Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast Alloy Steel

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Connecting Rod UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Jeremiah Schroeder DATE: 4/27/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Andrew Engel DATE: 4/26/2012 PART #: 2-06 QTY: 1
X.XXX .002 FILE NAME: Connecting Rod.SLDPRT SCALE: 1:3 SHEET: 19 OF 75
 1.00
0.875

1.375

0.6875
0.750

R0.250
0.50

Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Aluminum Bronze

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Connecting Rod Bearing Insert UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Jeremiah Schroeder DATE: 4/27/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Andrew Engel DATE: 4/26/2012 PART #: 2-07 QTY: 1
X.XXX .002 FILE NAME: Connecting Rod Insert.SLDPRT SCALE: 2:1 SHEET: 20 OF 75
 0.9375
0.625

2.000
1.889

0.871 0.5625
0.688

2X
0.375 0.500
2.000
R0.125 1.889
0.688

3.000 0.871
2.9375

0.9375
R0.875
0.500
Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast Alloy Steel
SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Slipper Base UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Jeremiah Schroeder DATE: 4/27/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Andrew Engel DATE: 4/26/2012 PART #: 2-08 QTY: 1
X.XXX .002 FILE NAME: Slipper.SLDPRT SCALE: 1:1.5 SHEET: 21 OF 75
 0.125

0.750 2.500
0.667 0.625 0.972
0.750

FILLET
R0.250 (TYP)

1.125

1.3125
0.6875
FILLET
R0.063 (TYP)

0.875
Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast Alloy Steel
SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Slipper Base UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Jeremiah Schroeder DATE: 5/1/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Andrew Engel DATE: 4/26/2012 PART #: 2-08 QTY: 1
X.XXX .002 FILE NAME: Slipper.SLDPRT SCALE: 1:1.5 SHEET: 22 OF 75
 2.563
2.000
1.125
0.750

R0.453
R1.063
0.625
0.667
0.750
1.000

Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast Alloy Steel

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Connecting Pin UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Jeremiah Schroeder DATE: 4/27/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Andrew Engel DATE: 4/26/2012 PART #: 2-09 QTY: 1
X.XXX .002 FILE NAME: Connecting Rod Pin.SLDPRT SCALE: 1.5:1 SHEET: 23 OF 75
 0.375 1.125

0.375
R2.250

1.125
1.250
1.036
0.361 0.625

2.6875
0.750
2.3125

0.878
Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Aluminum Bronze

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Slipper Guides UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Jeremiah Schroeder DATE: 4/27/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Andrew Engel DATE: 4/26/2012 PART #: 2-10 QTY: 2
X.XXX .002 FILE NAME: Slipper Guides.SLDPRT SCALE: 1:1 SHEET: 24 OF 75
 0.325

2X 0.250
0.500 3.750
1.000

R0.875
1.250 1.750
R1.750

1.000 0.650

Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast Alloy Steel

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Retaining Collar UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Jeremiah Schroeder DATE: 4/27/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Andrew Engel DATE: 4/26/2012 PART #: 2-11 QTY: 2
X.XXX .002 FILE NAME: Collar half.SLDPRT SCALE: 1:1.5 SHEET: 25 OF 75
 B

SCALE 1 : 3 SECTION B-B

B
SCALE 1 : 3

Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL:

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Cylinder Assembly UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/3/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Will Edwards DATE: 5/3/2012 PART #: 3-00 QTY: 1
X.XXX .002 FILE NAME: Cylinder Assembly.SLDASM SCALE: 1:5 SHEET: 26 OF 75
 14

3 12 13

11

6 18

15
7
10 8 2

5 9

16
Team Jabberwocky
17 PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING DIMENSIONS ARE IN INCHES
Marine Engine
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO, THIRD ANGLE PROJECTION
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL:

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Cylinder Assembly UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/1/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Will Edwards DATE: 5/3/2012 PART #: 3-00 QTY: 1
X.XXX .002 FILE NAME: Cylinder Assembly.SLDASM SCALE: 1:5 SHEET: 27 OF 75
 ITEM PART DESCRIPTION QTY. SHEET
NO. NUMBER NO.
1 3-01 1 29
2 3-02 Valve Cover 1 32
3 3-03 Cylinder Cap 1 33
4 3-04 Cylinder Exhast Valve 1 34
5 3-05 Bottom for Cylinder 1 35
Packing Gland
6 3-06 Top for Cylinder Packing 1 36
Gland
7 3-07 Packing for Cylinder 1 37
8 3-08 Valve Packing Gland Top 1 38
9 3-09 Valve Packing Gland 1 39
Bottom
10 3-10 Valve Packing 1 40
11 3-11 Speed Indicator 1 41
12 3-12 Drain Cock 1 42
13 3-13 Drain Cock Handle 1 43
14 3-14 Pressure Valve Sub- 2 44
Assembly
15 3-15 Hex Bolt 0.625-11x1.25x1.25 7 ---
16 3-16 Cylinder Packing Studs 2 48
17 3-17 Hex Nut 0.4375-20x0.75 2 ---
18 3-18 Hex Bolt 0.4375- 1 ---
20x3.5x1.125-N

Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL:

SolidWorks Student Edition. DEFAULT TOLERANCES:

DESCRIPTION: Cylinder BOM
UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY:
Jeremiah Schroeder DATE: 5/2/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY:
Andrew Engel DATE:
5/2/2012 PART #: QTY:

X.XXX .002 FILE NAME: Cylinder Assembly.SLDASM SCALE: 1:4 SHEET: 28 OF 75

 6.250
3.688
1/2-13 Tapped Hole

6.250
5/8-11 Tapped Hole
3.125

1.911
3.688
4.875 3.125
6.063 3.085
1.768 8.375
6.250
1.031 5.955
7/16-20
Tapped Hole
6.250
0.031 (TYP)
5/8-11
Tapped Hole
8.375 7.063

1.313 6.250
7.750 0.625
5.552 FILLET 2.063
5.302 R0.100 (TYP) 2.420
3.073 4.188
2.823 7.750
0.625 Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast Iron
SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION:
UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/3/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Will Edwards DATE: 5/3/2012 PART #: 3-01 QTY: 1
X.XXX .002 FILE NAME: Cylinder.SLDPRT SCALE: 1:5 SHEET: 29 OF 75
 N N

1.625

R1.250
R1.750

7.063
6.313
5.250
4.563
3.813
SECTION N-N 2.827
1.313 2.063
0.704
1.655
2.246 0.414
3.379
4.875 Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast Iron
SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION:
UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/3/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Will Edwards DATE: 5/3/2012 PART #: 3-01 QTY: 1
X.XXX .002 FILE NAME: Cylinder.SLDPRT SCALE: 1:3 SHEET: 30 OF 75
 2X
R0.500

1.141 THRU
1 NPT

FILLET
R0.100

0.25 THRU
2.778
1 NPT
1.073

Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast Iron
SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION:
UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/3/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Will Edwards DATE: 5/3/2012 PART #: 3-01 QTY: 1
X.XXX .002 FILE NAME: Cylinder.SLDPRT SCALE: 1:3 SHEET: 31 OF 75
 0.563
6.250
0.438

0.625

0.250
R2.500

3.500

0.625

0.625
Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast Iron

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Valve Cover UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/3/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Will Edwards DATE: 5/3/2012 PART #: 3-02 QTY: 1
X.XXX .002 FILE NAME: Valve Cover.SLDPRT SCALE: 1:2 SHEET: 32 OF 75
 A
6.625 3.833
SECTION A-A

1.500

A 0.188
1.469

2.094

4.531

5.156
6.438

1.625

0.625

Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Grey Cast Iron

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Cylinder Cap UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/3/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Will Edwards DATE: 5/3/2012 PART #: 3-03 QTY: 1
X.XXX .002 FILE NAME: Cylinder Cap.SLDPRT SCALE: 1:3 SHEET: 33 OF 75
 2.370

R1.000

1.625
1.155

1.320
A 1.294
FILLET
R0.125 TYP
FILLET 3.375
R0.313 3.250

1.786 1.375
1.500
1.000
0.625
A 0.875 SECTION A-A
1.411

Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Brass

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Cylinder Exhast Valve UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/3/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Will Edwards DATE: 5/3/2012 PART #: 3-04 QTY: 1
X.XXX .002 FILE NAME: Exhast Valve.SLDPRT SCALE: 1:2 SHEET: 34 OF 75
 1.125
0.563
3.500

2X
0.500

1.500
1.400

0.500

Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast Alloy Steel

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Bottom for Cylinder Packing Gland UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/3/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Will Edwards DATE: 5/3/2012 PART #: 3-05 QTY: 1
X.XXX .002 FILE NAME: Packing Gland 1.SLDPRT SCALE: 1:2 SHEET: 35 OF 75
 1.625

0.500
0.563

1.985
1.875
1.470
1.375

0.125
1.125

0.750
1.125
3.500
Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast Alloy Steel

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Top for Cylinder Packing Gland UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/3/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Will Edwards DATE: 5/3/2012 PART #: 3-06 QTY: 1
X.XXX .002 FILE NAME: Packing Gland 2.SLDPRT SCALE: 1:2 SHEET: 36 OF 75
 1.125

0.563

R1.328

1.128 1.033

1.298

Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL:

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Packing for Cylinder UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/3/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Will Edwards DATE: 5/3/2012 PART #: 3-07 QTY: 1
X.XXX .002 FILE NAME: Packing.SLDPRT SCALE: 2:1 SHEET: 37 OF 75
 0.375
A
1" NPT

2.000
1.625
2.625 R0.438

1.875
1.625
FILLET
1.125 0.875 1.188
R0.100

SECTION A-A
1-1/4-12 Machine Threads

Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast Alloy Steel

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Valve Packing Gland Top UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/2/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Jeremiah Schroeder DATE: 4/27/2012 PART #: 3-08 QTY: 1
X.XXX .002 FILE NAME: packing gland top.SLDPRT SCALE: 1:1 SHEET: 38 OF 75
 1-1/4-12 Machine Threads

1.625

1.000 0.875

1.500
1.083
2.000
FILLET
R 0.100
A 0.375
50°
FILLET SECTION A-A
R0.100

Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast Alloy Steel

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Valve Packing Gland Bottom UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/2/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Jeremiah Schroeder DATE: 4/27/2012 PART #: 3-09 QTY: 1
X.XXX .002 FILE NAME: Packing Gland bottom.SLDPRT SCALE: 1:1 SHEET: 39 OF 75
 0.375

R0.438

1.438

0.875

Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: BUTYL

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Valve Packing UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/2/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Jeremiah Schroeder DATE: 4/27/2012 PART #: 3-10 QTY: 1
X.XXX .002 FILE NAME: stephenson packing.SLDPRT SCALE: 1:1 SHEET: 40 OF 75
 1.188

13.625
0.500
1.500 R0.050 4.125
1.750

2.125 1.000
0.375

0.125
0.438 THRU 0.143 0.188
.125 0.893

R25.625
R3.441 0.750
0.641
2X 0.188
Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast Alloy Steel
SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Speed Indicator UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/2/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Jeremiah Schroeder DATE: 5/2/2012 PART #: 3-11 QTY: 1
X.XXX .002 FILE NAME: speed indicator.SLDPRT SCALE: 1:2 SHEET: 41 OF 75
 R0.250 R0.438

R0.219 R0.500
2X 1/4 NPT 0.750

0.636 .500 0.375

0.375
0.750
0.813

1.188

Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Brass
SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Drain Cock UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/2/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Jeremiah Schroeder DATE: 5/3/2012 PART #: 3-12 QTY: 1
X.XXX .002 FILE NAME: Draincock.SLDPRT SCALE: 1:1 SHEET: 42 OF 75
 R0.438

R1.225

0.375
0.625
0.438 R0.625
1.000
R0.500
0.375

R0.375 0.375

0.800

1.633

1.875

Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Brass

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Drain Cock Handle UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/2/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Jeremiah Schroeder DATE: 5/3/2012 PART #: 3-13 QTY: 1
X.XXX .002 FILE NAME: Draincockhandle.SLDPRT SCALE: 1:1 SHEET: 43 OF 75
 1

3 ITEM NO. PART DESCRIPTION QTY. SHEET

NUMBER NO
1 3-13-01 Pressure Valve 1 45
Threaded Pipe
2 3-13-02 Pressure Valve 1 47
3 3-13-03 Acorn Nut 5/16"- 1 ---
24
Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL:

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Pressure Valve SubAssembly UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/3/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Will Edwards DATE: 5/3/2012 PART #: 3-13 QTY: 2
X.XXX .002 FILE NAME: Pressure Valve Assembly.SLDASM SCALE: 1:2 SHEET: 44 OF 75
 0.438

1.000

0.625
1.000
1.188
1.375 1.500
1.875
2.000

Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Brass

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Pressure Valve Pipe UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Jeremiah Schroeder DATE: 5/3/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Andrew Engel DATE: 5/3/2012 PART #: 3-13-01 QTY: 2
X.XXX .002 FILE NAME: Pressure Valve Threaded Pipe.SLDPRT SCALE: 1:2 SHEET: 45 OF 75
 1.250

0.021

0.375 0.041

0.958 -20x0.25

DETAIL L
SCALE 2 : 1
Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Brass

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Pressure Valve Pipe UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Jeremiah Schroeder DATE: 5/3/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Andrew Engel DATE: 5/3/2012 PART #: 3-13-01 QTY: 2
X.XXX .002 FILE NAME: Pressure Valve Threaded Pipe.SLDPRT SCALE: 1:2 SHEET: 46 OF 75
 Standard
0.063 Thick
Shell

R3.469

R0.313 3.594

0.313
0.500
0.721
2.250
2.875
0.313
0.750

1.375
1.397
1.500
Team Jabberwocky
2.875
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast Alloy Steel

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Pressure Valve UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Jeremiah Schroeder DATE: 5/3/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Andrew Engel
DATE: 5/3/2012 PART #: 3-13-02 QTY: 2
X.XXX .002 FILE NAME: Pressure Valve.SLDPRT SCALE: 1:1.5 SHEET: 47 OF 75
 3.000
1.750

1.375

0.500

0.750

Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast Alloy Steel

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Cylinder Packing Studs UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Jeremiah Schroeder DATE: 5/2/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY:
Andrew Engel DATE: 5/3/2012 PART #: 3-15 QTY: 2
X.XXX .002 FILE NAME: Packing Stud.SLDPRT SCALE: 1:1 SHEET: 48 OF 75
 3

ITEM PART DESCRIPTION QTY. SHEET NO

NO. NUMBER
1 4-01 Valve Rod Actuator 1 50
2 4-02 Valve Rod 1 51
3 4-03 Slide Valve 1 52
4 4-04 Sliding Block Front Piece 1 53
5 4-05 Sliding Block Rear Piece 1 54
5 6 4-06 Stephenson Valve Fastener 1 55
7 4-07 1/2-20-1.5 Hex Bolt 8 ---
6 8 4-08 3/8-24 Hex Nut 1 ---

4
7

Team Jabberwocky
1 PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING DIMENSIONS ARE IN INCHES
Marine Engine
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO, THIRD ANGLE PROJECTION
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL:

SolidWorks
8 Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Handle Sub Assembly UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/1/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Jeremiah Schroeder DATE: 5/3/2012 PART #: 4-00 QTY: 1
X.XXX .002 FILE NAME: Valve Assembly.SLDASM SCALE: 1:4 SHEET: 49 OF 75
 0.375 THRU ALL
1.000

0.226 0.750
1.000
1.625
2.875
0.892

1/4-28 Machine Threads

0.500

3.313

6.000
6.500 0.800
0.750

Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Aluminum Bronze

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Valve Rod Actuator UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/1/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Jeremiah Schroeder DATE: 5/1/2012 PART #: 4-01 QTY: 1
X.XXX .002 FILE NAME: Valve Rod Actuator.SLDPRT SCALE: 1:2 SHEET: 50 OF 75
 2X 3/8"-24
.75 inches long

0.375

14.500

Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Alloy Steel
SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Valve Rod UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/1/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Jeremiah Schroeder DATE: 4/25/2012 PART #: 4-02 QTY: 1
X.XXX .002 FILE NAME: valve rod.SLDPRT SCALE: 1:4 SHEET: 51 OF 75
 3.250

2.563

2.438

1.625

0.813
2.063
1.000 0.500
1.563
0.875
2XR0.375
2XR0.250

1.500
1.125 1.000
0.625

3/8-24 .438
R0.813

Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Aluminum Bronze
SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Slide Valve UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/1/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Jeremiah Schroeder DATE: 4/25/2012 PART #: 4-03 QTY: 1
X.XXX .002 FILE NAME: Slide Valve.SLDPRT SCALE: 1:1 SHEET: 52 OF 75
 1.750

R0.938
0.875 R0.500

1.750
1.000

0.875 0.750
4X 0.500 THRU ALL

4.000 3.875 1.250

4.750

4X R0.500
Concentric with
bolt hole

FILLET
R0.250 (TYP)

Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast Alloy Steel

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Sliding Block Front Piece UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/1/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Jeremiah Schroeder DATE: 4/26/2012 PART #: 4-04 QTY: 1
X.XXX .002 FILE NAME: Sliding block front.SLDPRT SCALE: 1:2 SHEET: 53 OF 75
 0.500
R0.938

1.750 R0.500

3.750
8X R0.500
1.750
Concentric with
bolt hole
0.750

1.250 4.000

4.750

4X 0.453 1.150
1/2-20 UNF 1.000

4X 0.500 THRU ALL Team Jabberwocky

PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast Alloy Steel

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Sliding Block Rear Piece UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/1/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Jeremiah Schroeder DATE: 4/25/2012 PART #: 4-05 QTY: 1
X.XXX .002 FILE NAME: sliding block back.SLDPRT SCALE: 1:2 SHEET: 54 OF 75
 0.375

0.702

0.375

0.625

16°

Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Aluminum

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Stephenson Valve Fastener UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/2/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Jeremiah Schroeder DATE: 5/1/2012 PART #: 4-06 QTY: 1
X.XXX .002 FILE NAME: fastener.SLDPRT SCALE: 2:1 SHEET: 55 OF 75
 1

ITEM NO. PART DESCRIPTION QTY. SHEET

NUMBER NO.
1 5-01 Piston 1 57
2 5-02 Piston Rod 1 58
3 5-03 Piston Ring 2 59
Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL:

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Piston Assembly UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/1/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Will Edwards DATE: 5/3/2012 PART #: 5-00 QTY: 1
X.XXX .002 FILE NAME: Piston Assembly.SLDASM SCALE: 1:3 SHEET: 56 OF 75
 3.500
3.000 0.500
A 1.729
0.229

A 0.500
1.750 R2.750
2.250
1.500
1.188 2.509

0.563
0.250 SECTION A-A
Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast Alloy Steel
SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Piston UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: XXXXXXXXXX DATE: 5/1/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Will Edwards DATE: 5/3/2012 PART #: 5-01 QTY: 1
X.XXX .002 FILE NAME: Piston.SLDPRT SCALE: 1:2 SHEET: 57 OF 75
 0.500

12.000

10.500

0.563 Team Jabberwocky

PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast Alloy Steel
SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Piston Rod UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/3/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Will Edwards DATE: 5/3/2012 PART #: 5-02 QTY: 1
X.XXX .002 FILE NAME: Piston Rod.SLDPRT SCALE: 1:3 SHEET: 58 OF 75
 R1.500

0.044

0.313 35°

3.500
Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast Iron
SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Piston Ring UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/3/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Will Edwards DATE: 5/3/2012 PART #: 5-03 QTY: 2
X.XXX .002 FILE NAME: Piston Ring.SLDPRT SCALE: 1:1 SHEET: 59 OF 75
 10 7

6
9
5 1

8
ITEM NO. PART NUMBER DESCRIPTION QTY. SHEET
NO.
1 6-01 Link 1 61
2 6-02 Outer eccentric rod 1 62
3 6-03 Inner eccentric rod 1 64
2 3 4 6-04 Eccentric rod cap 2 66
5 6-05 Link plate 2 67
6 6-06 Link screw bearing 1 68
7 6-07 1/4-28 Machine 3 ---
12 Threaded Nut
1/4-28X1.25 Slotted
8 6-08 Head Machine 3 ---
Screw
9 6-09 1/4-20X1.75 Round 2 ---
Head Bolt
10 6-10 1/4-20 Hex Nut 2 ---

11 6-11 1/4-28X4 Hex Bolt 4 ---

12 6-12 1/4-28 Hex Nut 8 ---

Team Jabberwocky
4 PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED.
11 Edition.
MATERIAL: Various Metals

SolidWorks Student DEFAULT TOLERANCES: DESCRIPTION: Exploded view of the Stephenson Link Assembly
UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/2/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Christopher Pratt DATE: 5/3/2012 PART #: 6-00 QTY: 1

X.XXX .002 FILE NAME: Stephenson Link.SLDASM SCALE: 1:4 SHEET: 60 OF 75

 0.750
39.93°

R14.500 2.125
FILLET
R13.625 R0.500 (TYP)

R12.750
R11.875
R12.000
0.250
3.80°

0.875

Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast alloy steel

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Links the control lever and powertrain UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/2/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Christopher Pratt DATE: 4/25/2012 PART #: 6-01 QTY: 1
X.XXX .002 FILE NAME: Link.SLDPRT SCALE: 1:4 SHEET: 61 OF 75
 2.250
1.688
0.688
0.504
0.415

1.375
1.488 1.063
R0.438
0.313
0.250 THRU

R0.397 (TYP) 1.125

1.500
0.313
0.813 0.375
12.203 0.561
0.720
11.140

10.873 0.625
10.551
0.500
10.265

4.250 8.250
5.375
4.450 5.375
4.626 Team Jabberwocky
1.750
4.313 PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING DIMENSIONS ARE IN INCHES
Marine Engine
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO, THIRD ANGLE PROJECTION

4.125
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast Alloy Steel

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Outer rod for powertrain and Link UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/3/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Christopher Pratt DATE: 4/25/2012 PART #: 6-02 QTY: 1
X.XXX .002 FILE NAME: Outer eccentric rod top.SLDPRT SCALE: 1:4 SHEET: 62 OF 75
 4.000 FILLET
3.750 R0.100 (TYP)

R0.375

0.344 2X
0.469 Bottom
0.250 THRU FILLET
0.500
R0.125 (TYP)
G
0.750
0.313
0.625 0.541

DETAIL J
SCALE 1 : 2

G
0.250
0.938
SECTION G-G
SCALE 1 : 4

Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast Alloy Steel

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Outer rod for powertrain and Link UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/3/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Christopher Pratt DATE: 4/25/2012 PART #: 6-02 QTY: 1
X.XXX .002 FILE NAME: Outer eccentric rod top.SLDPRT SCALE: 1:4 SHEET: 63 OF 75
 2.250
1.688
0.688
0.415

FILLET
R0.100 (TYP
1.488 1.375
1.063
R0.438 0.313
0.250 THRU

0.375 R0.400 (TYP)

0.750

1.375 12.203
11.140 0.500
0.625
10.876

3.625
2.876
4.250
2.563 10.535
4.450
2.375 10.265
Team Jabberwocky
5.375 PROPRIETARY AND CONFIDENTIAL

1.750
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast Alloy Steel

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Inner rod for power train and Link UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/3/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Christopher Pratt DATE: 4/24/2012 PART #: 6-03 QTY: 1
X.XXX .002 FILE NAME: Inner eccentric rod top.SLDPRT SCALE: 1:4 SHEET: 64 OF 75
 4.000
3.750 2X
0.250 THRU FILLET
0.500 R0.125 (TYP)

Bottom R0.375 0.750

H 0.313
0.541
0.625
DETAIL K
SCALE 1 : 2

H
0.250
0.938
SECTION H-H
SCALE 1 : 4

Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast Alloy Steel

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Inner rod for power train and Link UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/3/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Christopher Pratt DATE: 4/24/2012 PART #: 6-03 QTY: 1
X.XXX .002 FILE NAME: Inner eccentric rod top.SLDPRT SCALE: 1:4 SHEET: 65 OF 75
 0.344
2.250 0.469
R0.375

3.750
0.250 THRU
4.000 FILLET
R0.100 (TYP)

R2.225
R2.125 0.938

0.961
1.750

FILLET
R1.664 R0.100 (TYP)
R0.250
R1.914
Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast Alloy Steel

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Bottom part of the eccentric rods UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/4/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Christopher Pratt DATE: 4/19/2012 PART #: 6-04 QTY: 2
X.XXX .002 FILE NAME: Eccentric rod cap.SLDPRT SCALE: 1:2 SHEET: 66 OF 75
 0.125

9.24° 3X
0.250 THRU

FILLET
0.797 R0.250 (TYP)
R13.875
R12.496
R12.500

Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast brass

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Plate that sandwiches the link UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/2/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Christopher Pratt DATE: 5/1/2012 PART #: 6-05 QTY: 2
X.XXX .002 FILE NAME: Link plate.SLDPRT SCALE: 1:2.5 SHEET: 67 OF 75
 0.750

0.875

0.250

Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast brass

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Bearing for the screw in the link UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Andrew Engel DATE: 5/2/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Christopher Pratt DATE: 4/17/2012 PART #: 6-06 QTY: 1
X.XXX .002 FILE NAME: Link screw bearing.SLDPRT SCALE: 2:1 SHEET: 68 OF 75
 4

5
3
2

PART
ITEM NO. NUMBER DESCRIPTION QTY. SHEET
NO.
7 1 7-01 Control Lever 1 70
2 7-02 Control Lever Pin 1 71
6
8
3 7-03 Grip 1 72
4 7-04 Handle Spring 1 73
5 7-05 Handle Spring Pin 1 74
6 7-06 Suspension link 1 75
1/4-20-1.5 Round Head
7 7-07 Bolt 1 ---
1/4-20-2 Round Head
8 7-08 Bolt 1 ---
9 9 7-09 HNUT 0.2500 20 D N 2 ---
Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast Alloy & Spring Steel

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Handle Sub-Assembly UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Jeremiah Schroeder DATE: 4/24/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Brandon Cisco DATE: 5/2/2012 PART #: 7-00 QTY: 1
X.XXX .002 FILE NAME: Handle Assembly.SLDASM SCALE: 1:5 SHEET: 69 OF 75
 1.25

R0.100

0.375
R10.500 3.125
0.625 9.875
0.75
0.250
0.375
0.800

33.00 0.25

27.00

26.75
25.11
12.19
0.50
11.75
Team Jabberwocky
1.250 PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
0.375
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast Alloy Steel

SolidWorks Student Edition. R0.563 DEFAULT TOLERANCES: DESCRIPTION: Control Lever UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Jeremiah Schroeder DATE: 4/25/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Brandon Cisco DATE: 4/26/2012 PART #: 7-01 QTY: 1
X.XXX .002 FILE NAME: Control Lever.SLDPRT SCALE: 1:6 SHEET: 70 OF 75
 1.000

0.380

Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast Alloy Steel

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Control Lever Pin UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Jeremiah Schroeder DATE: 4/25/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Brandon Cisco DATE: 4/24/2012 PART #: 7-02 QTY: 1
X.XXX .002 FILE NAME: Control lever Hand Grip pin.SLDPRT SCALE: 2:1 SHEET: 71 OF 75
 1.000
0.818
0.188

R0.250
1.033

0.125
5.888 R7.500
R14.467
6.874

6.000
R0.426

R0.375 3.447

0.875 0.750

0.380 0.031 0.125

0.125 0.188
0.156 1.000
0.188

0.750 Team Jabberwocky

PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast Alloy Steel
SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Grip UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Jeremiah Schroeder DATE: 4/26/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY:
Andrew Engel DATE: 5/2/2012 PART #: 7-03 QTY: 1
X.XXX .002 FILE NAME: Grip.SLDPRT SCALE: 1:2 SHEET: 72 OF 75
 0.0313

2.000
R2.250
0.125

2.205
2.233
0.063 0.250

Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Spring Steel

SolidWorks Student Edition. DEFAULT TOLERANCES:

DESCRIPTION:
Handle leaf spring UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Jeremiah Schroeder DATE: 4/26/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY:
Andrew Engel DATE: 5/2/2012 PART #: 7-04 QTY: 1
X.XXX .002 FILE NAME: Handle Spring.SLDPRT SCALE: 1:1 SHEET: 73 OF 75
 0.240

R0.138

0.170 0.180

0.125
Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast Alloy Steel

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Handle Spring Pin UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Jeremiah Schroeder DATE: 4/26/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Brandon Cisco DATE: 4/24/2012 PART #: 7-05 QTY: 1
X.XXX .002 FILE NAME: handle spring grip pin.SLDPRT SCALE: 8:1 SHEET: 74 OF 75
 0.375
0.750

0.875
1.250

FILLET
R0.100 (TYP)

0.375
2X 0.875

2X 0.250 6.000

Team Jabberwocky
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
IS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION Marine Engine
ME DEPARTMENT. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION
OF UNIVERSITY OF IDAHO, ME DEPARTMENT IS
Project
PROHIBITED. MATERIAL: Cast Alloy Steel

SolidWorks Student Edition. DEFAULT TOLERANCES: DESCRIPTION: Suspension Link UNIVERSITY OF IDAHO
For Academic Use Only. LINEAR:
X. .25
X.X .1
ANGULAR:
X. 2
X.X 1
CHECKED BY: Jeremiah Schroeder DATE: 4/25/2012 ME DEPARTMENT
X.XX .01 X.XX 0 30'
DRAWN BY: Christoper Pratt DATE: 5/3/2012 PART #: 7-06 QTY: 1
X.XXX .002 FILE NAME: Suspension link.SLDPRT SCALE: 1:2 SHEET: 75 OF 75