*** FMC PRIVATE ***

FMC ENERGY SYSTEMS

REPORT BY: Taylor, Angela 06−MAR−2013 Page: 1 OF 3
PART REPORT
_____________________________________________________________________________
PART DESCRIPTION
PART NUMBER: DRAWING NO:
1284778 PUMP ASSEMBLY; W1122 BCD GI, LH, W/2 NPT DU500009603
REVISION: Q X 1−1/4 NPT FLUID END, CARBOX. NITRILE DRAWING REV: C
ECN: 5027687 PISTON 440 SST BALL VALVE ASSEMBLIES DWG OWN: STE COE

TYPE: S STATUS: RELEASED OWNERSHIP: STE COE UOM: EA WEIGHT: 405 (184)
LBS (KGS)
_____________________________________________________________________________
PART DATA
PROD SPEC : NA QUALITY LVL: NA
MATL CLASS: TEMP RANGE:
PR# : GR# : SRV CLASS:
_____________________________________________________________________________
REVIEWED BY: Quance, Tyler REVIEW DATE : 07−SEP−2012
APPROVED BY: Lyon, Tim APPROVAL DATE: 20−SEP−2012
_____________________________________________________________________________
BILL OF MATERIAL

ITEM PART NUMBER DESCRIPTION DWG NUMBER UM QTY MATERIAL

−−−− −−−−−−−−−−−−−−− −−−−−−−−−−−−−−−−−−−−−−− −−−−−−−−−−−−−−− −− −−−−−− −−−−−−−−
1 5271955 POWER END ASSEMBLY; L11 DU500009546 EA 1
LH
2 1284777 FLUID CYLINDER; W11, 6700DU5015849 EA 1
W/2 NPT X 1−1/4 NPT,
GRAY IRON
3 1284740 SEAT, BALL, 1.563 DIA DU500012914 EA 6
GAGE LINE, .937 ID,
440C SST
4 1101419 BALL, 1−1/8 DIA, 440 NO−DWG EA 6
SST GR−100
5 1267586 CYLINDER; L1122, W/ DU500004582 EA 3
CERAMIC LINER, 3.250 OD
X 2.752 ID, 3.868 LONG
6 5260221 PISTON CUP, L1122, 2.84 DU500001677 EA 3
OD X .760 ID X 1.28
LONG, CARBOXILATED
NITRILE AND DUCK
7 A91663 PISTON HOLDER; L1622, DU500001684 EA 3
C67300 BRASS
8 1216753 PISTON RETAINER; L1622, DU500001686 EA 3
DELRIN
9 1285112 CYLINDER COVER; W11, DU500005711 EA 3
2.06 LONG, GRAY IRON
10 1285113 VALVE COVER; W11, W/ OD DU500000258 EA 3
GROOVE IN NOSE, 1.69
LG, CARBON STEEL
11 A80392 CYLINDER COVER CLAMP DU500005605 EA 3 M10126
CASTING; L11 65−45−12
DUCTILE IRON, TWO HOLE
12 A80391 VALVE COVER CLAMP DU500005621 EA 3 M10126
CASTING; F/W11, TWO
HOLE, 65−45−12 DUCTILE
IRON

(continued...)
 *** FMC PRIVATE ***
FMC ENERGY SYSTEMS
REPORT BY: Taylor, Angela 06−MAR−2013 Page: 2 OF 3
P/N: 1284778 PART REPORT
_____________________________________________________________________________
BILL OF MATERIAL (Continued)

ITEM PART NUMBER DESCRIPTION DWG NUMBER UM QTY MATERIAL

−−−− −−−−−−−−−−−−−−− −−−−−−−−−−−−−−−−−−−−−−− −−−−−−−−−−−−−−− −− −−−−−− −−−−−−−−
13 1101176 O−RING, 0.489 ID X NO−DWG EA 3
0.070 CS, UNIFORM NO.
014, NITRILE 70 DURO
14 1279676 GASKET; STUFFING BOX, 6700DU5010266 EA 6
2.89 ID X 3.25 OD .06
THICK, KEVLAR/NITRILE
15 1279674 GASKET; CYLINDER COVER, DU500004856 EA 3
2.88 ID X 3.38 OD X .06
THICK, KEVLAR/NITRILE
16 1279675 GASKET; VALVE COVER, DU500005549 EA 3
1.63 ID X 2.06 OD X .06
THICK, KEVLAR/NITRILE
17 1187039 PETCOCK; 1/8, BRASS, NO−DWG EA 1
ESSEX 63T
18 3263825 STUD, 1/2−13UNC−2A X NO−DWG EA 6 M20118
3.50 LONG PER IFI 136,
CONTINUOUS THREAD, ASTM
A193 GRADE B7, XYLAN
COATED
19 A91672 STUD; 5/8−11 UNC−2A X DU500009445 EA 2 M20118
7.88 LONG, PER IFI 136,
DOUBLE ENDED, TYPE 2,
ASTM A193 GRADE B7
ALLOY STEEL, BLUE XYLAN
COATED
20 P544895 STUD; 5/8−11 UNC−2A X DU500018397 EA 6 M20118
10.50 LONG, PER IFI
136, DOUBLE ENDED, TYPE
2, ASTM A193 GRADE B7
ALLOY STEEL, BLUE XYLAN
COATED
21 A5016 PLUNGER NUT; 3/4−16 UNF 6700DU5001798 EA 3
22 3235702 HEAVY HEX NUT; 1/2− NO−DWG EA 6 M10135
13UNC−2B, ASTM A194 GR
2H CARBON STEEL, BLUE
XYLAN COATED
23 504−088 HEAVY HEX NUT; 5/8− NO−DWG EA 8 M10135
11UNC−2B, ASTM A194 GR
2H CARBON STEEL, XYLAN
COATED
24 8309 NUT, HEX, 1/2−13 UNC, 6700DU5001799 EA 3
SILICON BRONZE INTERNAL
COATED LOCKING COMPOUND
25 1107385 WASHER, FLAT, 1/2, TYPE NO−DWG EA 6
A, NARROW (SAE), (.531
ID X 1.062 OD X .095
THK), ASME B18.22.1,
UNHARDENED, CARBON
STEEL, ZINC PLATED
26 1107386 WASHER, FLAT, 5/8, TYPE NO−DWG EA 6
A, NARROW (SAE), (.656
ID X 1.312 OD X .095

(continued...)
 *** FMC PRIVATE ***
FMC ENERGY SYSTEMS
REPORT BY: Taylor, Angela 06−MAR−2013 Page: 3 OF 3
P/N: 1284778 PART REPORT
_____________________________________________________________________________
BILL OF MATERIAL (Continued)

ITEM PART NUMBER DESCRIPTION DWG NUMBER UM QTY MATERIAL

−−−− −−−−−−−−−−−−−−− −−−−−−−−−−−−−−−−−−−−−−− −−−−−−−−−−−−−−− −− −−−−−− −−−−−−−−
THK), ASME B18.22.1,
UNHARDENED, CARBON
STEEL, ZINC PLATED
27 P501267 PIPE PLUG; HEX HEAD, 6000DU5002746 EA 6
1/8−27 NPT, 304 SST
28 5260800 PLUG; 1−1/4, HEX HD, CS 6000DU5009859 EA 1
***NO GRAPHICS***
29 1105121 SQUARE HEAD PLUG, PIPE, NO−DWG EA 3
2 INCH NPT MALE,
MALLEABLE IRON, OR CAST
IRON BLACK
30 5277981 NAMEPLATE; PISTON PUMP, 6700DU5001750 EA 1
.024−.036 THICK, 18−8
STAINLESS STEEL
31 1187413 TAPPING SCREW; PHILLIPS NO−DWG EA 2
PAN HEAD, TYPE B, #4−24
X .250 LONG, 18−8
STAINLESS STEEL
32 1177202 CAPLUG; TAPERED CAP AND NO−DWG EA 1
PLUG, 17−S, LOW DENSITY
POLYETHYLENE/RED
33 5266226 OPERATION AND NO−DWG EA 1
MAINTENANCE MANUAL, W11
TRIPLEX PUMPS
_____________________________________________________________________________
QUALITY MATRIX: 6QM5000
−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−
SECTION: 314.0 REV: A OWNER: STE COE STATUS: RELEASED
ASSEMBLY

Q00024 VISUAL INSPECTION, HANDLING, STORAGE AND SHIPPING

REQUIREMENTS FOR FLUID CONTROL EQUIPMENT

_____________________________________________________________________________
ENGINEERING NOTES AND SPECIFICATIONS

ENGINEERING SPECIFICATIONS:

Q50118 FCD USE ONLY − PUMP FASTENER TORQUE SPECIFICATION

Q50112 FCD USE ONLY − PUMP MECHANICAL RUN TEST PROCEDURE

Q50117 FCD USE ONLY − PUMP NAMEPLATE STAMPING PROCEDURE

C85024 FCD USE ONLY − PAINTING SPECIFICATION FOR INDUSTRIAL PUMP

PRODUCTS (REPLACES CP−20)

Q00250 FCD USE ONLY − SPECIFICATION FOR SERIALIZATION OF VARIOUS FLUID

CONTROL PRODUCTS
−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−
=============================================================================
=================================END OF PART=================================
 *** FMC PRIVATE ***
FMC TECHNOLOGIES
REPORT BY: Taylor, Angela 03−FEB−2015 Page: 1 OF 3
PART REPORT
_____________________________________________________________________________
PART DESCRIPTION
PART NUMBER: DRAWING NO:
5271955 POWER END ASSEMBLY; L11 LH, 416 SST PONY DU500009546
REVISION: M RODS DRAWING REV: C
ECN: 5035795 DWG OWN: STE COE

TYPE: S STATUS: RELEASED OWNERSHIP: STE COE UOM: EA WEIGHT: 299 (136)
LBS (KGS)
_____________________________________________________________________________
PART DATA
PROD SPEC : NA QUALITY LVL: NA
MATL CLASS: TEMP RANGE:
PR# : GR# : SRV CLASS:
_____________________________________________________________________________
REVIEWED BY: McClain, Mathew REVIEW DATE : 29−JAN−2015
APPROVED BY: Lyon, Tim APPROVAL DATE: 02−FEB−2015
_____________________________________________________________________________
BILL OF MATERIAL

ITEM PART NUMBER DESCRIPTION DWG NUMBER UM QTY MATERIAL

−−−− −−−−−−−−−−−−−−− −−−−−−−−−−−−−−−−−−−−−−− −−−−−−−−−−−−−−− −− −−−−−− −−−−−−−−
1 5257698 POWER FRAME; L11, GRAY DU500000399 EA 1
IRON
2 1285094 CRANKSHAFT AND GEAR DU500006849 EA 1
ASSEMBLY; L11
3 5266814 CONNECTING ROD; M12, 6700DU5010099 EA 3
DUCTILE IRON
4 P506675 ROD BEARING; HALF 6700DU5010197 EA 6
SHELL, M12, TRI−METAL
5 A91014 WRIST PIN; L11, 8620 6700DU5010226 EA 3 M25014
ALLOY STEEL
6 1252939 CROSSHEAD ASSEMBLY; DU500006174 EA 3
L11, CAST IRON
7 3268369 SEAL HOLDER: 6700DU5002689 EA 3
F/L11/16/M09, PLUNGER
ROD OIL SEALS
8 1177489 OIL SEAL; 1.00 ID X NO−DWG EA 9
1.75 OD X .375 LG,
BONDED, NITRILE
9 1248369 BEARING HOUSING; L11, DU500000389 EA 2
ECCENTRIC, GRAY IRON
10 A91675 GASKET; BEARING HOUSING 6700DU5005452 EA 2
L11, .02 THICK,
ACCUTORQ 1000
11 1252595 SHIM; BEARING HOUSING, DU500000363 EA 6
L11, ARTUS PLASTIC .005
THICK BLUE
12 P508969 BACK COVER; L/W11, 18 DU500000391 EA 1
HOLE, CARBON STEEL
13 P508966 GASKET; BACK COVER L11, DU500000374 EA 1
.06 THICK, FIBER−CORK
14 5257339 OIL SEAL; F/ROTATING DU500000378 EA 1
MOTION 1.500 ID X 2.375
OD X .500 LG, DOUBLE

(continued...)
 *** FMC PRIVATE ***
FMC TECHNOLOGIES
REPORT BY: Taylor, Angela 03−FEB−2015 Page: 2 OF 3
P/N: 5271955 PART REPORT
_____________________________________________________________________________
BILL OF MATERIAL (Continued)

ITEM PART NUMBER DESCRIPTION DWG NUMBER UM QTY MATERIAL

−−−− −−−−−−−−−−−−−−− −−−−−−−−−−−−−−−−−−−−−−− −−−−−−−−−−−−−−− −− −−−−−− −−−−−−−−
LIP, SPRING LOADED
15 1177473 BEARING CONE; 2.2500 ID DU500008182 EA 2
X 1.1875 LG
16 1177474 BEARING CUP; 4.4375 OD DU500008185 EA 2
X 1.1875 LG
17 P511596 PINION SHAFT; L11, 6700DU5005056 EA 1
SPHERICAL ROLLER
BEARING, 1.500 SHAFT
DIA., 19.13 LG, AISI
9310H
18 5257338 PINION CAP; L11 1018 DU500000377 EA 1
CARBON STEEL
19 P508916 PINION BEARING CAP; DU500000365 EA 1
L11, 1018 CARBON STEEL
20 P511746 BEARING; SPHERICAL DU500008188 EA 2
ROLLER, 1.5748 ID X
3.1496 OD X .905 LG, F/
L11 PINION SHAFT
21 A91674 GASKET; PINION 6700DU5005441 EA 2
HOUSING/CAP L11, .02
THICK, ACCUTORQ 1000
22 1104349 KEY; 3/8 SQUARE X 2.50 DU500001721 EA 1 M11803
LG, 1018 CARBON STEEL
23 1266323 PACKING NUT; L11, NO. 2 6700DU5004439 EA 3
ZAMAK
24 3268418 GASKET: F/L11/L16/M09, 6700DU5004676 EA 3
PACKING NUT ON PLUNGER
ROD MATL: KEVLAR &
NITRILE, KLINGER SIL C−
4401
25 5260567 INSPECTION PLATE; L11, DU500000361 EA 1
CARBON STEEL
26 3226710 O−RING, 5.234 ID X NO−DWG EA 2 E50126
0.139 CS, UNIFORM NO.
252, NITRILE 90 DURO
PER ENGR SPEC E50126
27 A5054 BREATHER ASSEMBLY; 1− 6700DU5001751 EA 1
1/4 NPT, ANTI SPLASH
GUARD, ALUMINUM
28 1103470 SET SCREW; 5/16−18 X 6000DU5001774 EA 6
1/2 SOCKET HEAD ***NO
GRAPHICS***
29 1100804 CAP SCREW, HEX HEAD, NO−DWG EA 2
1/4−20UNC−2A X .50
LONG, PER ASME B18.2.1,
SAE J429 GRADE 5, ZINC
COATED
30 1106980 CAP SCREW, HEX HEAD, NO−DWG EA 20
1/2−13UNC−2A X .75
LONG, PER ASME B18.2.1,
SAE J429 GRADE 5, ZINC
COATED

(continued...)
 *** FMC PRIVATE ***
FMC TECHNOLOGIES
REPORT BY: Taylor, Angela 03−FEB−2015 Page: 3 OF 3
P/N: 5271955 PART REPORT
_____________________________________________________________________________
BILL OF MATERIAL (Continued)

ITEM PART NUMBER DESCRIPTION DWG NUMBER UM QTY MATERIAL

−−−− −−−−−−−−−−−−−−− −−−−−−−−−−−−−−−−−−−−−−− −−−−−−−−−−−−−−− −− −−−−−− −−−−−−−−
31 1100054 CAP SCREW, HEX HEAD, NO−DWG EA 12
1/2−13UNC−2A X 1.00
LONG, PER ASME B18.2.1,
SAE J429 GRADE 5, ZINC
COATED
32 3269460 PIPE PLUG; SQ HEAD, 1/8 6000DU5002699 EA 1
NPT, HIGH DENSITY
POLYETHYLENE
33 1187048 PIPE PLUG; SQ HEAD, 1/2 6000DU5002283 EA 2
NPT, MAGNETIC, CARBON
STEEL
34 3269461 PIPE PLUG SQUARE HEAD; 6000DU5002172 EA 1
1 1/4 NPT, HIGH DENSITY
POLYETHYLENE
_____________________________________________________________________________
QUALITY MATRIX: 6QM5000
−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−
SECTION: 314.0 REV: A OWNER: STE COE STATUS: RELEASED
ASSEMBLY

Q00024 VISUAL INSPECTION, HANDLING, STORAGE AND SHIPPING

REQUIREMENTS FOR FLUID CONTROL EQUIPMENT

_____________________________________________________________________________
ENGINEERING NOTES AND SPECIFICATIONS

MISCELLANEOUS NOTES

NOTE1 3269460 AND 3269461 ARE TO BE INSTALLED AFTER TESTING,

AND BEFORE CLEANING AND PAINTING.
−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−
ENGINEERING SPECIFICATIONS:

Q50118 FCD USE ONLY − PUMP FASTENER TORQUE SPECIFICATION

−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−
=============================================================================
=================================END OF PART=================================