Engineering

Bill of Material

Part: AY51025
Description: HOSE ASSY, INDEXERS, ODS, PC4000
Eng ID: 0
Drawing ID: 183100007 Rev No: B
Item Qty Units Part ID Eng ID Description

H034 1.00 EA F471TC0639080808-259.75-X- 0 HOSE ASSY, 1/2, SWV STR, 90° SHT, 259.75
H035 1.00 EA F471TC0639080808-259.75-X- 0 HOSE ASSY, 1/2, SWV STR, 90° SHT, 259.75
H036 1.00 EA F471TC0606080808-239.75-X- 0 HOSE ASSY,1/2,SWV STR,SWV STR, 239.75
H037 1.00 EA F471TC0606080808-239.75-X- 0 HOSE ASSY,1/2,SWV STR,SWV STR, 239.75
H038 1.00 EA F471TC0639080808-55.75-X-5 0 HOSE ASSY,1/2,SWV STR,90 SHT,55.75
H039 1.00 EA F471TC0639080808-55.75-X-5 0 HOSE ASSY,1/2,SWV STR,90 SHT,55.75
H040 1.00 EA F471TC0641080808-120.75-X- 0 HOSE ASSY, 1/2, SWV STR, 90°LONG, 120.75
H041 1.00 EA F471TC0639080808-120.75-X- HOSE ASSY, 1/2, SWV STR, 90 SHT, 120.75
H042 1.00 EA F471TC0641080808-94.75-X-9 0 HOSE ASSY,1/2,SWV STR,90 LONG,94.75
H043 1.00 EA F471TC0639080808-94.75-X-9 0 HOSE ASSY,1/2,SWV STR,90 SHT,94.75
H044 1.00 EA F471TC0639080808-238.75-X- 0 HOSE ASSY, 1/2, SWV STR, 90° SHT, 238.75
H045 1.00 EA F471TC0639080808-238.75-X- 0 HOSE ASSY, 1/2, SWV STR, 90° SHT, 238.75
H046 1.00 EA F471TC0606080808-271.75-X- 0 HOSE ASSY, 1/2, SWV STR, SWV STR, 271.7
H047 1.00 EA F471TC0606080808-271.75-X- 0 HOSE ASSY, 1/2, SWV STR, SWV STR, 271.7

Printed: #Name? Page 1 of 1

 183100007.dwg ()

HYDRAULIC SPECIFICATIONS ELECTRICAL SPECIFICATIONS APPROVED BY: NOTICE

THE DRAWING, INFORMATION AND SUBJECT MATTER HEREOF ARE THE
HYDRAULIC PLUMBING HYDRAULIC COLOR CODE ELECTRICAL ENCLOSURES ELECTRICAL COLOR CODE CONFIDENTIAL, SOLE AND EXCLUSIVE PROPERTY OF CANRIG DRILLING
TECHNOLOGIES CANADA LTD. AND ARE NOT TO BE COPIED,
All HYDRAULIC HOSE TO BE RATED FOR A Pressure ---------- Red All electrical enclosures will be rated Nema Digital Input ------ Orange WHATSOEVER WITHOUT THE WRITTEN CONSENT OR DIRECTION.
MINIMUM OF 3000 PSI, TOUGH COVER, JIC Return ------------ Blue 4 or better and of Stainless Steel Digital Output ---- Yellow
37 ° FLARE CONNECTION UNLESS OTHERWISE Work Port A ------ Orange construction unless otherwise stated. Analog Input ----- Red
STATED. ALL ADAPTER FITTINGS TO BE ORB
DRAWN BY: BHK PC4000
Work Port B ------ Green ELECTRICAL WIRING Analog Output --- White
OR JIC UNLESS OTHERWISE STATED Pilot Flow --------- Brown 24 VDC Power ---- Red
All electrical wiring will be to CSA CHECKED BY: CATWALK PLUMBING SCHEMATIC
Symbols ---------- Black 0 Volt -------------- Black
starndards for non classified, zone 0 and SCALE: SIZE: DATE ISSUED: DRAWING #: SHEET #: REV.
B 12/11/20 SH ADDED 6000psi HOSE KIT AC Ground -------- Green
zone 1. Requirments
No. Y/M/D BY REVISIONS NTS D 05/15/08 183100007 1 OF 2 B

2 of 4
 183100007.dwg ()

HYDRAULIC SPECIFICATIONS ELECTRICAL SPECIFICATIONS APPROVED BY: NOTICE

THE DRAWING, INFORMATION AND SUBJECT MATTER HEREOF ARE THE
HYDRAULIC PLUMBING HYDRAULIC COLOR CODE ELECTRICAL ENCLOSURES ELECTRICAL COLOR CODE CONFIDENTIAL, SOLE AND EXCLUSIVE PROPERTY OF CANRIG DRILLING
TECHNOLOGIES CANADA LTD. AND ARE NOT TO BE COPIED,
All HYDRAULIC HOSE TO BE RATED FOR A Pressure ---------- Red All electrical enclosures will be rated Nema Digital Input ------ Orange WHATSOEVER WITHOUT THE WRITTEN CONSENT OR DIRECTION.
MINIMUM OF 3000 PSI, TOUGH COVER, JIC Return ------------ Blue 4 or better and of Stainless Steel Digital Output ---- Yellow
37 ° FLARE CONNECTION UNLESS OTHERWISE Work Port A ------ Orange construction unless otherwise stated. Analog Input ----- Red
STATED. ALL ADAPTER FITTINGS TO BE ORB
DRAWN BY: BHK PC4000
Work Port B ------ Green ELECTRICAL WIRING Analog Output --- White
OR JIC UNLESS OTHERWISE STATED Pilot Flow --------- Brown 24 VDC Power ---- Red
All electrical wiring will be to CSA CHECKED BY: CATWALK PLUMBING SCHEMATIC
Symbols ---------- Black 0 Volt -------------- Black
starndards for non classified, zone 0 and SCALE: SIZE: DATE ISSUED: DRAWING #: SHEET #: REV.
B 12/11/20 SH ADDED 6000psi HOSE KIT AC Ground -------- Green
zone 1. Requirments
No. Y/M/D BY REVISIONS NTS D 05/15/08 183100007 2 OF 2 B

3 of 4
 Engineering
Bill of Material

Part: AY51026
Description: HOSE ASSY, PIPE RACK, DS, PC4000
Eng ID: 0
Drawing ID: 183100007 Rev No: B
Item Qty Units Part ID Eng ID Description

H048 1.00 EA F471TC0606080808-93.25-X-9 0 HOSE ASSY, 1/2, SWV STR, SWV STR, 93.25
H049 1.00 EA F471TC0606080808-93.25-X-9 0 HOSE ASSY, 1/2, SWV STR, SWV STR, 93.25
H050 1.00 EA F471TC0606080808-293.75-X- 0 HOSE ASSY, 1/2, SWV STR, SWV STR, 293.75
H051 1.00 EA F471TC0606080808-293.75-X- 0 HOSE ASSY, 1/2, SWV STR, SWV STR, 293.75
H052 1.00 EA F471TC0606080808-354.75-X- VSA HOSE ASSY, 1/2, SWV STR, SWV STR, 354.75
H053 1.00 EA F471TC0606080808-354.75-X- VSA HOSE ASSY, 1/2, SWV STR, SWV STR, 354.75

Printed: #Name? Page 1 of 1

 183100007.dwg ()

HYDRAULIC SPECIFICATIONS ELECTRICAL SPECIFICATIONS APPROVED BY: NOTICE

THE DRAWING, INFORMATION AND SUBJECT MATTER HEREOF ARE THE
HYDRAULIC PLUMBING HYDRAULIC COLOR CODE ELECTRICAL ENCLOSURES ELECTRICAL COLOR CODE CONFIDENTIAL, SOLE AND EXCLUSIVE PROPERTY OF CANRIG DRILLING
TECHNOLOGIES CANADA LTD. AND ARE NOT TO BE COPIED,
All HYDRAULIC HOSE TO BE RATED FOR A Pressure ---------- Red All electrical enclosures will be rated Nema Digital Input ------ Orange WHATSOEVER WITHOUT THE WRITTEN CONSENT OR DIRECTION.
MINIMUM OF 3000 PSI, TOUGH COVER, JIC Return ------------ Blue 4 or better and of Stainless Steel Digital Output ---- Yellow
37 ° FLARE CONNECTION UNLESS OTHERWISE Work Port A ------ Orange construction unless otherwise stated. Analog Input ----- Red
STATED. ALL ADAPTER FITTINGS TO BE ORB
DRAWN BY: BHK PC4000
Work Port B ------ Green ELECTRICAL WIRING Analog Output --- White
OR JIC UNLESS OTHERWISE STATED Pilot Flow --------- Brown 24 VDC Power ---- Red
All electrical wiring will be to CSA CHECKED BY: CATWALK PLUMBING SCHEMATIC
Symbols ---------- Black 0 Volt -------------- Black
starndards for non classified, zone 0 and SCALE: SIZE: DATE ISSUED: DRAWING #: SHEET #: REV.
B 12/11/20 SH ADDED 6000psi HOSE KIT AC Ground -------- Green
zone 1. Requirments
No. Y/M/D BY REVISIONS NTS D 05/15/08 183100007 1 OF 2 B

2 of 4
 183100007.dwg ()

HYDRAULIC SPECIFICATIONS ELECTRICAL SPECIFICATIONS APPROVED BY: NOTICE

THE DRAWING, INFORMATION AND SUBJECT MATTER HEREOF ARE THE
HYDRAULIC PLUMBING HYDRAULIC COLOR CODE ELECTRICAL ENCLOSURES ELECTRICAL COLOR CODE CONFIDENTIAL, SOLE AND EXCLUSIVE PROPERTY OF CANRIG DRILLING
TECHNOLOGIES CANADA LTD. AND ARE NOT TO BE COPIED,
All HYDRAULIC HOSE TO BE RATED FOR A Pressure ---------- Red All electrical enclosures will be rated Nema Digital Input ------ Orange WHATSOEVER WITHOUT THE WRITTEN CONSENT OR DIRECTION.
MINIMUM OF 3000 PSI, TOUGH COVER, JIC Return ------------ Blue 4 or better and of Stainless Steel Digital Output ---- Yellow
37 ° FLARE CONNECTION UNLESS OTHERWISE Work Port A ------ Orange construction unless otherwise stated. Analog Input ----- Red
STATED. ALL ADAPTER FITTINGS TO BE ORB
DRAWN BY: BHK PC4000
Work Port B ------ Green ELECTRICAL WIRING Analog Output --- White
OR JIC UNLESS OTHERWISE STATED Pilot Flow --------- Brown 24 VDC Power ---- Red
All electrical wiring will be to CSA CHECKED BY: CATWALK PLUMBING SCHEMATIC
Symbols ---------- Black 0 Volt -------------- Black
starndards for non classified, zone 0 and SCALE: SIZE: DATE ISSUED: DRAWING #: SHEET #: REV.
B 12/11/20 SH ADDED 6000psi HOSE KIT AC Ground -------- Green
zone 1. Requirments
No. Y/M/D BY REVISIONS NTS D 05/15/08 183100007 2 OF 2 B

3 of 4
 Engineering
Bill of Material

Part: AY51027
Description: HOSE ASSY, PIPE RACK, ODS, PC4000
Eng ID: 0
Drawing ID: 183100007 Rev No: B
Item Qty Units Part ID Eng ID Description

H058 1.00 EA F471TC0641080808-143.75-X- VSA HOSE ASSY, 1/2, SWV STR, 90° LONG,143.75
H059 1.00 EA F471TC0639080808-143.75-X- VSA HOSE ASSY, 1/2, SWV STR, 90° SHT, 143.75
H060 1.00 EA F471TC0641080808-372.75-X- VSA HOSE ASSY, 1/2, SWV STR, 90° LONG,372.75
H061 1.00 EA F471TC0639080808-372.75-X- VSA HOSE ASSY, 1/2, SWV STR, 90° SHT, 372.75
H062 1.00 EA F471TC0641080808-384.75-X- VSA HOSE ASSY, 1/2, SWV STR, 90° LONG,384.75
H063 1.00 EA F471TC0639080808-384.75-X- VSA HOSE ASSY, 1/2, SWV STR, 90° SHT, 384.75
H064 1.00 EA F471TC0606080808-188.75-X- 0 HOSE ASSY, 1/2, SWV STR, SWV STR, 188.75
H065 1.00 EA F471TC0606080808-138.75-X- VSA HOSE ASSY, 1/2, SWV STR, SWV STR, 138.75

Printed: #Name? Page 1 of 1

 183100007.dwg ()

HYDRAULIC SPECIFICATIONS ELECTRICAL SPECIFICATIONS APPROVED BY: NOTICE

THE DRAWING, INFORMATION AND SUBJECT MATTER HEREOF ARE THE
HYDRAULIC PLUMBING HYDRAULIC COLOR CODE ELECTRICAL ENCLOSURES ELECTRICAL COLOR CODE CONFIDENTIAL, SOLE AND EXCLUSIVE PROPERTY OF CANRIG DRILLING
TECHNOLOGIES CANADA LTD. AND ARE NOT TO BE COPIED,
All HYDRAULIC HOSE TO BE RATED FOR A Pressure ---------- Red All electrical enclosures will be rated Nema Digital Input ------ Orange WHATSOEVER WITHOUT THE WRITTEN CONSENT OR DIRECTION.
MINIMUM OF 3000 PSI, TOUGH COVER, JIC Return ------------ Blue 4 or better and of Stainless Steel Digital Output ---- Yellow
37 ° FLARE CONNECTION UNLESS OTHERWISE Work Port A ------ Orange construction unless otherwise stated. Analog Input ----- Red
STATED. ALL ADAPTER FITTINGS TO BE ORB
DRAWN BY: BHK PC4000
Work Port B ------ Green ELECTRICAL WIRING Analog Output --- White
OR JIC UNLESS OTHERWISE STATED Pilot Flow --------- Brown 24 VDC Power ---- Red
All electrical wiring will be to CSA CHECKED BY: CATWALK PLUMBING SCHEMATIC
Symbols ---------- Black 0 Volt -------------- Black
starndards for non classified, zone 0 and SCALE: SIZE: DATE ISSUED: DRAWING #: SHEET #: REV.
B 12/11/20 SH ADDED 6000psi HOSE KIT AC Ground -------- Green
zone 1. Requirments
No. Y/M/D BY REVISIONS NTS D 05/15/08 183100007 1 OF 2 B

2 of 4
 183100007.dwg ()

HYDRAULIC SPECIFICATIONS ELECTRICAL SPECIFICATIONS APPROVED BY: NOTICE

THE DRAWING, INFORMATION AND SUBJECT MATTER HEREOF ARE THE
HYDRAULIC PLUMBING HYDRAULIC COLOR CODE ELECTRICAL ENCLOSURES ELECTRICAL COLOR CODE CONFIDENTIAL, SOLE AND EXCLUSIVE PROPERTY OF CANRIG DRILLING
TECHNOLOGIES CANADA LTD. AND ARE NOT TO BE COPIED,
All HYDRAULIC HOSE TO BE RATED FOR A Pressure ---------- Red All electrical enclosures will be rated Nema Digital Input ------ Orange WHATSOEVER WITHOUT THE WRITTEN CONSENT OR DIRECTION.
MINIMUM OF 3000 PSI, TOUGH COVER, JIC Return ------------ Blue 4 or better and of Stainless Steel Digital Output ---- Yellow
37 ° FLARE CONNECTION UNLESS OTHERWISE Work Port A ------ Orange construction unless otherwise stated. Analog Input ----- Red
STATED. ALL ADAPTER FITTINGS TO BE ORB
DRAWN BY: BHK PC4000
Work Port B ------ Green ELECTRICAL WIRING Analog Output --- White
OR JIC UNLESS OTHERWISE STATED Pilot Flow --------- Brown 24 VDC Power ---- Red
All electrical wiring will be to CSA CHECKED BY: CATWALK PLUMBING SCHEMATIC
Symbols ---------- Black 0 Volt -------------- Black
starndards for non classified, zone 0 and SCALE: SIZE: DATE ISSUED: DRAWING #: SHEET #: REV.
B 12/11/20 SH ADDED 6000psi HOSE KIT AC Ground -------- Green
zone 1. Requirments
No. Y/M/D BY REVISIONS NTS D 05/15/08 183100007 2 OF 2 B

3 of 4
 Engineering
Bill of Material

Part: AY51029
Description: HOSE ASSY, GORETRAC, PC4000
Eng ID: 0
Drawing ID: 183100007 Rev No: B
Item Qty Units Part ID Eng ID Description

H078 1.00 EA F721TC0606161616-449-X-44 VSA HOSE ASSY,1,SWV STR,SWV STR,449

H079 1.00 EA F721TC0606161616-449-X-44 VSA HOSE ASSY,1,SWV STR,SWV STR,449
H080 1.00 EA F721TC0637202020-196.25-X- 0 HOSE ASSY, 1-1/4, SWV STR, 45°, 196.25
H081 1.00 EA F721TC0606161616-140-X-13 0 HOSE ASSY, 1, SWV STR, SWV STR, 140

Printed: #Name? Page 1 of 1

 183100007.dwg ()

HYDRAULIC SPECIFICATIONS ELECTRICAL SPECIFICATIONS APPROVED BY: NOTICE

THE DRAWING, INFORMATION AND SUBJECT MATTER HEREOF ARE THE
HYDRAULIC PLUMBING HYDRAULIC COLOR CODE ELECTRICAL ENCLOSURES ELECTRICAL COLOR CODE CONFIDENTIAL, SOLE AND EXCLUSIVE PROPERTY OF CANRIG DRILLING
TECHNOLOGIES CANADA LTD. AND ARE NOT TO BE COPIED,
All HYDRAULIC HOSE TO BE RATED FOR A Pressure ---------- Red All electrical enclosures will be rated Nema Digital Input ------ Orange WHATSOEVER WITHOUT THE WRITTEN CONSENT OR DIRECTION.
MINIMUM OF 3000 PSI, TOUGH COVER, JIC Return ------------ Blue 4 or better and of Stainless Steel Digital Output ---- Yellow
37 ° FLARE CONNECTION UNLESS OTHERWISE Work Port A ------ Orange construction unless otherwise stated. Analog Input ----- Red
STATED. ALL ADAPTER FITTINGS TO BE ORB
DRAWN BY: BHK PC4000
Work Port B ------ Green ELECTRICAL WIRING Analog Output --- White
OR JIC UNLESS OTHERWISE STATED Pilot Flow --------- Brown 24 VDC Power ---- Red
All electrical wiring will be to CSA CHECKED BY: CATWALK PLUMBING SCHEMATIC
Symbols ---------- Black 0 Volt -------------- Black
starndards for non classified, zone 0 and SCALE: SIZE: DATE ISSUED: DRAWING #: SHEET #: REV.
B 12/11/20 SH ADDED 6000psi HOSE KIT AC Ground -------- Green
zone 1. Requirments
No. Y/M/D BY REVISIONS NTS D 05/15/08 183100007 1 OF 2 B

2 of 4
 183100007.dwg ()

HYDRAULIC SPECIFICATIONS ELECTRICAL SPECIFICATIONS APPROVED BY: NOTICE

THE DRAWING, INFORMATION AND SUBJECT MATTER HEREOF ARE THE
HYDRAULIC PLUMBING HYDRAULIC COLOR CODE ELECTRICAL ENCLOSURES ELECTRICAL COLOR CODE CONFIDENTIAL, SOLE AND EXCLUSIVE PROPERTY OF CANRIG DRILLING
TECHNOLOGIES CANADA LTD. AND ARE NOT TO BE COPIED,
All HYDRAULIC HOSE TO BE RATED FOR A Pressure ---------- Red All electrical enclosures will be rated Nema Digital Input ------ Orange WHATSOEVER WITHOUT THE WRITTEN CONSENT OR DIRECTION.
MINIMUM OF 3000 PSI, TOUGH COVER, JIC Return ------------ Blue 4 or better and of Stainless Steel Digital Output ---- Yellow
37 ° FLARE CONNECTION UNLESS OTHERWISE Work Port A ------ Orange construction unless otherwise stated. Analog Input ----- Red
STATED. ALL ADAPTER FITTINGS TO BE ORB
DRAWN BY: BHK PC4000
Work Port B ------ Green ELECTRICAL WIRING Analog Output --- White
OR JIC UNLESS OTHERWISE STATED Pilot Flow --------- Brown 24 VDC Power ---- Red
All electrical wiring will be to CSA CHECKED BY: CATWALK PLUMBING SCHEMATIC
Symbols ---------- Black 0 Volt -------------- Black
starndards for non classified, zone 0 and SCALE: SIZE: DATE ISSUED: DRAWING #: SHEET #: REV.
B 12/11/20 SH ADDED 6000psi HOSE KIT AC Ground -------- Green
zone 1. Requirments
No. Y/M/D BY REVISIONS NTS D 05/15/08 183100007 2 OF 2 B

3 of 4
 Engineering
Bill of Material

Part: AY51035
Description: HOSE ASSY, PIPE RACK, DS & ODS,
PC4000
Eng ID: 0
Drawing ID: 183100007 Rev No: B
Item Qty Units Part ID Eng ID Description

H054 3.00 EA F471TC0606080808-97.75-X-9 VSA HOSE ASSY, 1/2, SWV STR, SWV STR, 97.75
H055 3.00 EA F471TC0606080808-106.75-X- VSA HOSE ASSY, 1/2, SWV STR, SWV STR, 106.75
H056 3.00 EA F471TC0606080808-97.75-X-9 VSA HOSE ASSY, 1/2, SWV STR, SWV STR, 97.75
H057 3.00 EA F471TC0606080808-106.75-X- VSA HOSE ASSY, 1/2, SWV STR, SWV STR, 106.75

Printed: #Name? Page 1 of 1

 183100007.dwg ()

HYDRAULIC SPECIFICATIONS ELECTRICAL SPECIFICATIONS APPROVED BY: NOTICE

THE DRAWING, INFORMATION AND SUBJECT MATTER HEREOF ARE THE
HYDRAULIC PLUMBING HYDRAULIC COLOR CODE ELECTRICAL ENCLOSURES ELECTRICAL COLOR CODE CONFIDENTIAL, SOLE AND EXCLUSIVE PROPERTY OF CANRIG DRILLING
TECHNOLOGIES CANADA LTD. AND ARE NOT TO BE COPIED,
All HYDRAULIC HOSE TO BE RATED FOR A Pressure ---------- Red All electrical enclosures will be rated Nema Digital Input ------ Orange WHATSOEVER WITHOUT THE WRITTEN CONSENT OR DIRECTION.
MINIMUM OF 3000 PSI, TOUGH COVER, JIC Return ------------ Blue 4 or better and of Stainless Steel Digital Output ---- Yellow
37 ° FLARE CONNECTION UNLESS OTHERWISE Work Port A ------ Orange construction unless otherwise stated. Analog Input ----- Red
STATED. ALL ADAPTER FITTINGS TO BE ORB
DRAWN BY: BHK PC4000
Work Port B ------ Green ELECTRICAL WIRING Analog Output --- White
OR JIC UNLESS OTHERWISE STATED Pilot Flow --------- Brown 24 VDC Power ---- Red
All electrical wiring will be to CSA CHECKED BY: CATWALK PLUMBING SCHEMATIC
Symbols ---------- Black 0 Volt -------------- Black
starndards for non classified, zone 0 and SCALE: SIZE: DATE ISSUED: DRAWING #: SHEET #: REV.
B 12/11/20 SH ADDED 6000psi HOSE KIT AC Ground -------- Green
zone 1. Requirments
No. Y/M/D BY REVISIONS NTS D 05/15/08 183100007 1 OF 2 B

2 of 4
 183100007.dwg ()

HYDRAULIC SPECIFICATIONS ELECTRICAL SPECIFICATIONS APPROVED BY: NOTICE

THE DRAWING, INFORMATION AND SUBJECT MATTER HEREOF ARE THE
HYDRAULIC PLUMBING HYDRAULIC COLOR CODE ELECTRICAL ENCLOSURES ELECTRICAL COLOR CODE CONFIDENTIAL, SOLE AND EXCLUSIVE PROPERTY OF CANRIG DRILLING
TECHNOLOGIES CANADA LTD. AND ARE NOT TO BE COPIED,
All HYDRAULIC HOSE TO BE RATED FOR A Pressure ---------- Red All electrical enclosures will be rated Nema Digital Input ------ Orange WHATSOEVER WITHOUT THE WRITTEN CONSENT OR DIRECTION.
MINIMUM OF 3000 PSI, TOUGH COVER, JIC Return ------------ Blue 4 or better and of Stainless Steel Digital Output ---- Yellow
37 ° FLARE CONNECTION UNLESS OTHERWISE Work Port A ------ Orange construction unless otherwise stated. Analog Input ----- Red
STATED. ALL ADAPTER FITTINGS TO BE ORB
DRAWN BY: BHK PC4000
Work Port B ------ Green ELECTRICAL WIRING Analog Output --- White
OR JIC UNLESS OTHERWISE STATED Pilot Flow --------- Brown 24 VDC Power ---- Red
All electrical wiring will be to CSA CHECKED BY: CATWALK PLUMBING SCHEMATIC
Symbols ---------- Black 0 Volt -------------- Black
starndards for non classified, zone 0 and SCALE: SIZE: DATE ISSUED: DRAWING #: SHEET #: REV.
B 12/11/20 SH ADDED 6000psi HOSE KIT AC Ground -------- Green
zone 1. Requirments
No. Y/M/D BY REVISIONS NTS D 05/15/08 183100007 2 OF 2 B

3 of 4
 Engineering
Bill of Material
Part: AY51591
Description: KIT, LIFT ARM STOP BLOCK, PC4000
Eng ID: 0
Drawing ID: AY1591 Rev No: $
Item Qty Units Part ID Description

01 1.00 EA DT51603 LIFT ARM STOP BLOCK, PC4000

02 2.00 EA FW-0750-A WASHER, F, 3/4, PLAIN, TYPE A
03 2.00 EA LW-0750-HS LOCKWASHER, 3/4 HELICAL SPRING
04 2.00 EA HH-0750NC-0300-GR8 CAPSCR, HEX HD, 3/4-10UNC x 3.00, GR8
05 2.00 EA BW-0750 WASHER, B, 3/4, BEVEL
06 2.00 EA LN-0750NC-NL-GR8 LOCKNUT, 3/4-10UNC, NYLOCK, GR8

Printed: 4/23/2015
 A B C D IF IN DOUBT......PLEASE ASK! G H I J K

7 7

6 6

5 5

4 5 4

3
3

2 2

INIT. YY/MM/DD THIRD ANGLE PROJECTION

WELDING PROCEDURE AS PER CANRIG SPECIFICATION - ENG 704, UNLESS NOTED OTHERWISE MODELED MRB 14/05/28
THIS PRINT AND DESIGN AND DETAIL REMOVE SHARP CORNERS AND BURRS TOLERANCE - UNLESS OTHERWISE SPECIFIED DRAWN MRB 14/05/28
SHOWN THEREON ARE THE PROPERTY CASTING ± 1/16 FABRICATING IMPERIAL FABRICATING [METRIC] CHECKED GRY 14/09/16
1 CONCENTRICITY .005 TIR 0 TO 24" ± 1/16" 0 TO 610 mm ± 1 mm
AND INVENTION OF CANRIG DRILLING APPRV'D GDF 14/09/10
STRAIGHTNESS ± .005 IN 5 INCHES 24" to 60" ± 1/8" 610 TO 1525 ± 3 mm DO NOT SCALE DRAWING 1
TECHNOLOGY LTD.. THIS PRINT IS ± 3/16" 1525 TO 3048 ± 5 mm MATERIAL
SQUARENESS ± .010 IN 5 INCHES 60" to 120"
FURNISHED WITH THE UNDERSTANDING 120" to 280" ± 1/4" 3048 TO 7112 ± 7 mm
PARALLELISM ± .010 IN 5 INCHES
THAT IT IS NOT TO BE REPRODUCED FLATNESS ± .010 or as Shown 280" & OVER ± 1/2" 7112 & OVER ± 13 mm KIT, LIFT ARM STOP BLOCK, PC4000
WITHOUT PERMISSION AND RETURNED TRUE POSITION .005 MACHINING IMPERIAL MACHINING METRIC
UPON DEMAND. ALL RIGHTS OF DESIGN DECIMAL .x ± .030" DECIMAL x. ± .8 mm
A 14/05/28 MRB INTIAL RELEASE 1990 GRY GDF MACHINED SURFACES 125 .xx ± .015" x.x ± .40 mm
AND INVENTION ARE RESERVED BY EST. WEIGHT SCALE 1:1
CANRIG DRILLING TECHNOLOGY LTD.. .xxx ± .005" x.xx ± .13 mm SHEET 1 OF 1 AY51591 REV A
REV DATE BY REVISION DESCRIPTION ECN CHKD APVD MIN. RADIUS UNLESS SHOWN = 0.03 MAX. ANGULAR MACHINING ± 1° FABRICATION ± 2° 4.5 lbs SHEET SIZE D

A B C D IF IN DOUBT......PLEASE ASK! G H I J K
 Engineering
Bill of Material
Part: AY51592
Description: KIT, STAIRS, 42" CATWALK
Eng ID: 0
Drawing ID: AY51592 Rev No: A
Item Qty Units Part ID Description

01 1.00 EA DT51027 STAIRS,WELDMENT,42" CATWALK

02 2.00 EA DT51028 HAND RAIL,WELDMENT,42" CATWALK
03 2.00 EA SH-0750NC-0800 CAPSCR, HEX SOC HD, 3/4-10UNC x 8.00
04 4.00 EA LW-0750-HS LOCKWASHER, 3/4 HELICAL SPRING
05 2.00 EA LN-0750NC-NL-GR8 LOCKNUT, 3/4-10UNC, NYLOCK, GR8

Printed: 4/23/2015
 A B C D IF IN DOUBT......PLEASE ASK! G H I J K

7 7

6 6

7
38 8 987

3 4 5

5 5

1
25 2 648
1

4 4

1
71 4 1810

3
3
5
41 16 1049

50°

2 2

29 737

INIT. YY/MM/DD THIRD ANGLE PROJECTION

WELDING PROCEDURE AS PER CANRIG SPECIFICATION - ENG 704, UNLESS NOTED OTHERWISE MODELED MRB 14/06/03
THIS PRINT AND DESIGN AND DETAIL REMOVE SHARP CORNERS AND BURRS TOLERANCE - UNLESS OTHERWISE SPECIFIED DRAWN MRB 14/06/03
SHOWN THEREON ARE THE PROPERTY CASTING ± 1/16 FABRICATING IMPERIAL FABRICATING [METRIC] CHECKED
1 CONCENTRICITY .005 TIR 0 TO 24" ± 1/16" 0 TO 610 mm ± 1 mm
AND INVENTION OF CANRIG DRILLING APPRV'D GDF 14/09/10
STRAIGHTNESS ± .005 IN 5 INCHES 24" to 60" ± 1/8" 610 TO 1525 ± 3 mm DO NOT SCALE DRAWING 1
TECHNOLOGY LTD.. THIS PRINT IS ± 3/16" 1525 TO 3048 ± 5 mm MATERIAL
SQUARENESS ± .010 IN 5 INCHES 60" to 120"
FURNISHED WITH THE UNDERSTANDING 120" to 280" ± 1/4" 3048 TO 7112 ± 7 mm
PARALLELISM ± .010 IN 5 INCHES
THAT IT IS NOT TO BE REPRODUCED FLATNESS ± .010 or as Shown 280" & OVER ± 1/2" 7112 & OVER ± 13 mm KIT, STAIRS, 42" CATWALK
WITHOUT PERMISSION AND RETURNED TRUE POSITION .005 MACHINING IMPERIAL MACHINING METRIC
UPON DEMAND. ALL RIGHTS OF DESIGN DECIMAL .x ± .030" DECIMAL x. ± .8 mm
A 14/06/03 MRB INTIAL RELEASE 1990 GRY GDF MACHINED SURFACES 125 .xx ± .015" x.x ± .40 mm
AND INVENTION ARE RESERVED BY EST. WEIGHT SCALE 1:8
CANRIG DRILLING TECHNOLOGY LTD.. .xxx ± .005" x.xx ± .13 mm SHEET 1 OF 1 AY51592 REV A
REV DATE BY REVISION DESCRIPTION ECN CHKD APVD MIN. RADIUS UNLESS SHOWN = 0.03 MAX. ANGULAR MACHINING ± 1° FABRICATION ± 2° 232.8 lbs SHEET SIZE D

A B C D IF IN DOUBT......PLEASE ASK! G H I J K
 SUBSECTION 7A: CARRIER

Assembly Description Drawing Rev

111300006 ASSY, PC4000-42-420-R2D CARRIER 111300006 D

121300003 CARRIER SHEAVE ASSY 121300003 A
121300006 KIT, ASSY, FRONT ROLLER 121300006 C
121300010 ASSY, SAFETY PIN, FRONT, PC4000 121300010 C
121300011 ASSY,CARRIER MASTER,PC4000 121300011 C
121300013 ASSY,CARRIER SLAVE, R2D, PC4000 121300013 B
121300015 ASSY,CARRIER SKATE DRIVE,PC4000 121300015M REL-01
121300025 ASSY, PIVOT BLK 121300025 A
121300027 ASSY, EYEBOLT, CARRIER CABLE 121300027 B
121300035 ASSY, SAFETY PIN, PC4000 121300035 B
121300036 ASSY, JACKING BOLT, CARRIER 121300036 A
121300037 ASSY, KICKER, FRONT, PC4000 121300037 A
121300038 ASSY, KICKER, MIDDLE, PC4000 121300038 A
121300039 ASSY, KICKER, REAR, PC4000 121300039 A
121300040 ASSY, V-ROLLER, PC4000 121300040M A
121300042 ASSY, OVERSHOOT DOG, PC4000 121300042 C
121300043 ASSY,VLV BANK,CARRIER,PC4000,OUTFITTED 121300043 B
121300044 ASSY, ACCESS COVER, CARRIER 121300044 A
121300045 ASSY, CA GUIDE, FRONT, CARRIER 121300045 REL-01
121300046 ASSY, SKATE WINCH, PC4000 121300046 C
121300047 ASSY, ELEC BOX, CARRIER 121300047 A
121300050 ASSY, SKATE SHEAVE, PC4000 121300050M A
121300060 ASSY,COMPACT SKATE,REVERSE VEE 121300060 A
121300073 ASSY,CABLE CAPTURE,CARRIER 121300073 B
AY50389 ASSY, CARRIER CBAL VLV AY50389 B
AY51030 HOSE ASSY, CARRIER, PC4000 183100008 A
AY51031 HOSE ASSY, SAFETY PIN, PC4000 183100008 A
AY51595 ASSY, CHAIN, SKATE DRIVE, PC4000 AY51595 A

Thursday, 0D\, 2015 Serial Number 40007

 Engineering
Bill of Material

Part: 111300006
Description: ASSY, PC4000-42-420-R2D CARRIER
Eng ID: 2
Drawing ID: 111300006 Rev No: D
Item Qty Units Part ID Eng ID Description

01 1.00 EA 121300011 1 ASSY,CARRIER MASTER,PC4000

02 1.00 EA 121300013 1 ASSY,CARRIER SLAVE, R2D, PC4000
03 1.00 EA 121300060 1 ASSY,COMPACT SKATE,REVERSE VEE
04 1.00 EA 121300050 0 ASSY, SKATE SHEAVE, PC4000
05 4.00 EA 121300073 VSA ASSY,CABLE CAPTURE,CARRIER
06 1.00 EA AY50200 VSA ASSY, CA, SKATE, 9/16IN x 145FT
REF 0.00 EA 183100008 SCHEM, PC4000 CARRIER PLUMBING

Printed: #Name? Page 1 of 1

 A

DETAIL A 1

B 6

DETAIL D

DETAIL C

REV. DESCRIPTION DATE

4 D UPDATED WITH CHANGES TO 121300011, SEE ECN # CN1424 1/11/2011
DETAIL B C 121300060 HAS BEEN REPLACED WITH 121300076, SEE ECN CN1338 FOR DETAILS 5/26/2010
B REPLACED 121100213 WITH 121300073, SEE ECN# CN1363 FOR FURTHER DETAIL 1/5/2010
A RFM 12/08/2009
TITLE:
© 2009 CANRIG DRILLING TECHNOLOGY CANADA LIMITED
ALL RIGHTS RESERVED
THE DRAWINGS, INFORMATION AND SUBJECT MATTER HEREOF ASSY, PC4000-42-420-R2D CARRIER
ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE PROPERTY OF
CANRIG DRILLING TECHNOLOGY CANADA LTD, AND ARE NOT
TO BE COPIED, REPRODUCED, OR USED IN ANY MANNER FOR 7475 51 Street SE DRAWN BY: DATE: DRAWING NO: SHEET: REV:
ANY PURPOSE WHATSOEVER WITHOUT WRITTEN CONSENT Calgary, Alberta, Canada, T2C 4L6
OR DIRECTION. Website: www.canrig.com JCR 8/12/2009 111300006 1 OF 1 D
Bus. (403) 237-6400 Fax. (403) 233-2667
 Engineering
Bill of Material
Part: 121300003
Description: CARRIER SHEAVE ASSY
Eng ID: 1
Drawing ID: 121300003 Rev No: A
Item Qty Units Part ID Description

01 1.00 EA M10513 SHEAVE

02 1.00 EA 161100079 SKATE SHEAVE AXLE
03 2.00 EA 161100080 SHEAVE SPACER
04 2.00 EA 161100290 ADJUSTMENT BLOCK
05 2.00 EA M10499 BALL BEARING

Printed: 4/23/2015
 4

4 1
5
2

CANRIG DRILLING TECHNOLOGY CANADA LIMITED © 2006

THE DRAWINGS, INFORMATION AND SUBJECT MATTER

7475 51 Street SE
HEREOF ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE CARRIER SHEAVE ASSY
Calgary, Alberta, Canada, T2C 4L6 PROPERTY OF CANRIG DRILLING TECHNOLOGY CANADA
Website: www.canrig.com LTD, AND ARE NOT TO BE COPIED, REPRODUCED OR USED
Bus. (403) 237-6400
Fax. (403) 233-2667
IN ANY MANNER FOR ANY PURPOSE WHATSOEVER SHEET 1 OF 1
REV. DESCRIPTION DATE WITHOUT WRITTEN CONSENT OR DIRECTION.
A UPDATED DRAWING FORMAT 6/16/2008
121300003
DATE CREATED: PART NO: REV:
REL-06 FIRST MANUAL/ASSEMBLY ISSUE 7/25/2007 April 24, 2007 11:54:12 AM A
 Engineering
Bill of Material
Part: 121300006
Description: KIT, ASSY, FRONT ROLLER
Eng ID: 2
Drawing ID: 121300006 Rev No: C
Item Qty Units Part ID Description

01 1.00 EA M10490 RETNG RING, SPIRAL, EXT, 2.00 IN

02 1.00 EA M11536 TAPERED ROLLER ASSEMBLY, PIPE CARRIER

Printed: 4/23/2015
 2

2
1

A
SECTION A-A
REV. DESCRIPTION DATE
C M11536 REPLACED ALL COMPONENTS EXCEPT M10490, SEE ECN'S CN1298 AND CN1320 FOR FURTHER DETAIL 7/27/2009
B M10490 (ITEM 5) WAS ADDED, SEE ECN# CN1285. 14-May-2009
A UPDATED DRAWING FORMAT 6/16/2008
TITLE:
© 2009 CANRIG DRILLING TECHNOLOGY CANADA LIMITED
ALL RIGHTS RESERVED
THE DRAWINGS, INFORMATION AND SUBJECT MATTER HEREOF TAPERED ROLLER ASSEMBLY
ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE PROPERTY OF
CANRIG DRILLING TECHNOLOGY CANADA LTD, AND ARE NOT
TO BE COPIED, REPRODUCED, OR USED IN ANY MANNER FOR 7475 51 Street SE DRAWN BY: DATE: DRAWING NO: SHEET: REV:
ANY PURPOSE WHATSOEVER WITHOUT WRITTEN CONSENT Calgary, Alberta, Canada, T2C 4L6
OR DIRECTION. Website: www.canrig.com TLK 4/24/2007 121300006 1 OF 1 C
Bus. (403) 237-6400 Fax. (403) 233-2667
 Engineering
Bill of Material
Part: 121300010
Description: ASSY, SAFETY PIN, FRONT, PC4000
Eng ID: 2
Drawing ID: 121300010 Rev No: C
Item Qty Units Part ID Description

01 1.00 EA H10476 CYL, SAFETY PIN, B 1.5, R 1.0, ST 6.68

02 1.00 EA 131100274 WELDMENT, SAFETY PIN SLEEVE
03 1.00 EA SB-0625-0100-0500NC-GR8 SCR, SHLDR, 5/8 DIA x 1.00 LG x 1/2 UNC
04 4.00 EA LW-0250-HS-HC LOCKWASHER, 1/4 HELICAL SPR,HIGH COLLAR
05 4.00 EA SH-0250NC-0325 CAPSCR, HEX SOC HD, 1/4-20UNC x 3.25
06 2.00 EA H15-090109B-06 PLUG, SOC HEX, 3/8 ORB
07 2.00 EA H15-070120-08-06 ADPT, MALE 1/2 JIC, MALE 3/8 ORB
08 1.00 EA 141500065 MOUNTING PAD, SAFETY PIN
09 1.00 EA M12005 ALLOY STEEL BALL 3/8 DIA
10 2.00 EA SS-0500NC-0050 SETSCREW 1/2-13UNC x 0.50 CUP POINT

Printed: 4/23/2015
 A B IF IN DOUBT......PLEASE ASK! D E

C
3 2
10

4 4

3 3

C
7
5 4

2 2

8
6
ITEM 4, (LW-0250-HS)QTY. OF 4,
REPLACED TO LW-0250-HS-HC;ITEM 5,
(HH-0250NC-0225-GR8)QTY. OF 4, INIT. YY/MM/DD THIRD ANGLE PROJECTION
C 14/08/06 JLH 2472 GRY TDB WELDING PROCEDURE AS PER CANRIG SPECIFICATION - ENG 704, UNLESS NOTED OTHERWISE
REPLACED TO SH-0250NC-0325; ITEM MODELED
10, (SS-0500NC-0050)QTY. OF 1
REMOVE SHARP CORNERS AND BURRS TOLERANCE - UNLESS OTHERWISE SPECIFIED DRAWN KJH 07/10/01
1 CHANGED TO 2. THIS PRINT AND DESIGN AND DETAIL
REPLACED SH-0250NC-HS-HC AND CASTING ± 1/16 FABRICATING IMPERIAL FABRICATING [METRIC] CHECKED - 1
SHOWN THEREON ARE THE PROPERTY -
B 10/10/12 LW-0250-HS-HC, SEE ECN # CN1426 0 to 24" ± 1/16" 0 TO 610 mm ± 1 mm
AND INVENTION OF CANRIG DRILLING CONCENTRICITY .005 TIR 24" to 60" ± 1/8" 610 TO 1525 ± 3 mm APPROVED - - DO NOT SCALE
FOR DETAILS. STRAIGHTNESS ± .005 IN 5 INCHES
TECHNOLOGY LTD.. THIS PRINT IS 60 to 120" ± 3/16" 1525 TO 3048 ± 5 mm MATERIAL DRAWING
REPACED HEX HEAD BOLTS WITH FURNISHED WITH THE UNDERSTANDING SQUARENESS ± .010 IN 5 INCHES 120" to 280" ± 1/4" 3048 TO 7112 ± 7 mm
A 08/06/17 PARALLELISM ± .010 IN 5 INCHES
SOCKET HEAD AS BUILT THAT IT IS NOT TO BE REPRODUCED 280" & OVER ± 1/2" 7112 & OVER ± 13 mm
FLATNESS ± .010 or as Shown ASSY, SAFETY PIN, FRONT,
WITHOUT PERMISSION AND RETURNED MACHINING IMPERIAL MACHINING METRIC
REL-01 07/11/22 RFM TRUE POSITION .005
UPON DEMAND. ALL RIGHTS OF DESIGN DECIMAL .x ± .030" DECIMAL x. ± .8 mm PC400
AND INVENTION ARE RESERVED BY MACHINED SURFACES 125 .xx ± .015" x.x ± .40 mm EST. WEIGHT SCALE
.xxx ± .005" x.xx ± .13 mm
1:2
REV DATE BY REVISION DESCRIPTION ECN CHKD APVD CANRIG DRILLING TECHNOLOGY LTD.. SHEET 1 OF 1 121300010 REV C
MIN. RADIUS UNLESS SHOWN = 0.03 MAX. ANGULAR MACHINING ± 1° FABRICATION ± 2° 19.42 lbs SHEET SIZE B
A B IF IN DOUBT......PLEASE ASK! D E
 Engineering
Bill of Material
Part: 121300011
Description: ASSY,CARRIER MASTER,PC4000
Eng ID: 0
Drawing ID: 121300011 Rev No: C
Item Qty Units Part ID Description

01 1.00 EA 131100337 WELDMENT, RANGE 2 PIPE CARRIER FRONT

02 2.00 EA 121300037 ASSY, KICKER, FRONT, PC4000
03 2.00 EA 121300038 ASSY, KICKER, MIDDLE, PC4000
04 2.00 EA 121300039 ASSY, KICKER, REAR, PC4000
05 2.00 EA 121300010 ASSY, SAFETY PIN, FRONT, PC4000
06 4.00 EA 121300035 ASSY, SAFETY PIN, PC4000
07 1.00 EA 121300045 ASSY, CA GUIDE, FRONT, CARRIER
08 1.00 EA 121300040 ASSY, V-ROLLER, PC4000
09 1.00 EA 121300044 ASSY, ACCESS COVER, CARRIER
10 1.00 EA 121300043 ASSY,VLV BANK,CARRIER,PC4000,OUTFITTED
11 1.00 EA 121300047 ASSY, ELEC BOX, CARRIER
12 1.00 EA 121300046 ASSY, SKATE WINCH, PC4000
13 2.00 EA 121300006 KIT, ASSY, FRONT ROLLER
14 2.00 EA 121300025 ASSY, PIVOT BLK
15 2.00 EA 121300036 ASSY, JACKING BOLT, CARRIER
16 1.00 EA 121300042 ASSY, OVERSHOOT DOG, PC4000
17 2.00 EA 121300027 ASSY, EYEBOLT, CARRIER CABLE
18 1.00 EA AY50389 ASSY, CARRIER CBAL VLV
19 51.00 EA H10928 CLAMP, DOUBLE, 1/2 IN DIA, ASSY W/O WP

Printed: 4/23/2015
 4

10

1 4

6
3

19

8
5

12
REV. DESCRIPTION DATE
13 C UPDATED WITH CHANGES TO 131100337, SEE ECN # CN1424 1/11/2011

B ADDED H10928 AS BUILT, SEE ECN# CN1347 FOR FURTHER DETAIL 11/18/2009

A UPDATED AS PER METRIC UNIT 9/12/2009

TITLE:
© 2009 CANRIG DRILLING TECHNOLOGY CANADA LIMITED
ALL RIGHTS RESERVED
THE DRAWINGS, INFORMATION AND SUBJECT MATTER HEREOF ASSY, CARRIER MASTER, PC4000
ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE PROPERTY OF
CANRIG DRILLING TECHNOLOGY CANADA LTD, AND ARE NOT
TO BE COPIED, REPRODUCED, OR USED IN ANY MANNER FOR 7475 51 Street SE DRAWN BY: DATE: DRAWING NO: SHEET: REV:
ANY PURPOSE WHATSOEVER WITHOUT WRITTEN CONSENT Calgary, Alberta, Canada, T2C 4L6
OR DIRECTION. Website: www.canrig.com GDF 9/27/2007 121300011 1 OF 7 C
Bus. (403) 237-6400 Fax. (403) 233-2667
 14

15

11

16
17

18

TITLE:
© 2009 CANRIG DRILLING TECHNOLOGY CANADA LIMITED
ALL RIGHTS RESERVED
THE DRAWINGS, INFORMATION AND SUBJECT MATTER HEREOF ASSY, CARRIER MASTER, PC4000
ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE PROPERTY OF
CANRIG DRILLING TECHNOLOGY CANADA LTD, AND ARE NOT
TO BE COPIED, REPRODUCED, OR USED IN ANY MANNER FOR 7475 51 Street SE DRAWN BY: DATE: DRAWING NO: SHEET: REV:
ANY PURPOSE WHATSOEVER WITHOUT WRITTEN CONSENT Calgary, Alberta, Canada, T2C 4L6
OR DIRECTION. Website: www.canrig.com GDF 9/27/2007 121300011 2 OF 7 C
Bus. (403) 237-6400 Fax. (403) 233-2667
 I G H F E

SECTION A-A

A A

L
K J C
D B
OFF-DRILLER'S SIDE

M
DRILLER'S SIDE

TITLE:
© 2009 CANRIG DRILLING TECHNOLOGY CANADA LIMITED
ALL RIGHTS RESERVED
THE DRAWINGS, INFORMATION AND SUBJECT MATTER HEREOF ASSY, CARRIER MASTER, PC4000
ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE PROPERTY OF
CANRIG DRILLING TECHNOLOGY CANADA LTD, AND ARE NOT
TO BE COPIED, REPRODUCED, OR USED IN ANY MANNER FOR 7475 51 Street SE DRAWN BY: DATE: DRAWING NO: SHEET: REV:
ANY PURPOSE WHATSOEVER WITHOUT WRITTEN CONSENT Calgary, Alberta, Canada, T2C 4L6
OR DIRECTION. Website: www.canrig.com GDF 9/27/2007 121300011 3 OF 7 C
Bus. (403) 237-6400 Fax. (403) 233-2667
 8

13

DETAIL B

12

SECTION C-C
TITLE:
© 2009 CANRIG DRILLING TECHNOLOGY CANADA LIMITED
ALL RIGHTS RESERVED
THE DRAWINGS, INFORMATION AND SUBJECT MATTER HEREOF ASSY, CARRIER MASTER, PC4000
ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE PROPERTY OF
CANRIG DRILLING TECHNOLOGY CANADA LTD, AND ARE NOT
TO BE COPIED, REPRODUCED, OR USED IN ANY MANNER FOR 7475 51 Street SE DRAWN BY: DATE: DRAWING NO: SHEET: REV:
ANY PURPOSE WHATSOEVER WITHOUT WRITTEN CONSENT Calgary, Alberta, Canada, T2C 4L6
OR DIRECTION. Website: www.canrig.com GDF 9/27/2007 121300011 4 OF 7 C
Bus. (403) 237-6400 Fax. (403) 233-2667
 5

2 19

SECTION D-D
8
12

DETAIL E
7

16

DETAIL F
TITLE:
© 2009 CANRIG DRILLING TECHNOLOGY CANADA LIMITED
ALL RIGHTS RESERVED
THE DRAWINGS, INFORMATION AND SUBJECT MATTER HEREOF ASSY, CARRIER MASTER, PC4000
ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE PROPERTY OF
CANRIG DRILLING TECHNOLOGY CANADA LTD, AND ARE NOT
TO BE COPIED, REPRODUCED, OR USED IN ANY MANNER FOR 7475 51 Street SE DRAWN BY: DATE: DRAWING NO: SHEET: REV:
ANY PURPOSE WHATSOEVER WITHOUT WRITTEN CONSENT Calgary, Alberta, Canada, T2C 4L6
OR DIRECTION. Website: www.canrig.com GDF 9/27/2007 121300011 5 OF 7 C
Bus. (403) 237-6400 Fax. (403) 233-2667
 3
DETAIL G
DETAIL H 1 17

10

4
14
15
DETAIL I

TYP FRONT SAFETY PIN CYLINDERS

DETAIL J

TITLE:
© 2009 CANRIG DRILLING TECHNOLOGY CANADA LIMITED
ALL RIGHTS RESERVED
THE DRAWINGS, INFORMATION AND SUBJECT MATTER HEREOF ASSY, CARRIER MASTER, PC4000
ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE PROPERTY OF
CANRIG DRILLING TECHNOLOGY CANADA LTD, AND ARE NOT
TO BE COPIED, REPRODUCED, OR USED IN ANY MANNER FOR 7475 51 Street SE DRAWN BY: DATE: DRAWING NO: SHEET: REV:
ANY PURPOSE WHATSOEVER WITHOUT WRITTEN CONSENT Calgary, Alberta, Canada, T2C 4L6
OR DIRECTION. Website: www.canrig.com GDF 9/27/2007 121300011 6 OF 7 C
Bus. (403) 237-6400 Fax. (403) 233-2667
 6

TYP MID AND REAR SAFETY PIN CYLINDERS

DETAIL K

18

13
DETAIL L

12

DETAIL M 9

TITLE:
© 2009 CANRIG DRILLING TECHNOLOGY CANADA LIMITED
ALL RIGHTS RESERVED
THE DRAWINGS, INFORMATION AND SUBJECT MATTER HEREOF ASSY, CARRIER MASTER, PC4000
ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE PROPERTY OF
CANRIG DRILLING TECHNOLOGY CANADA LTD, AND ARE NOT
TO BE COPIED, REPRODUCED, OR USED IN ANY MANNER FOR 7475 51 Street SE DRAWN BY: DATE: DRAWING NO: SHEET: REV:
ANY PURPOSE WHATSOEVER WITHOUT WRITTEN CONSENT Calgary, Alberta, Canada, T2C 4L6
OR DIRECTION. Website: www.canrig.com GDF 9/27/2007 121300011 7 OF 7 C
Bus. (403) 237-6400 Fax. (403) 233-2667
 Engineering
Bill of Material

Part: 121300013
Description: ASSY,CARRIER SLAVE, R2D, PC4000
Eng ID: 1
Drawing ID: 121300013 Rev No: B
Item Qty Units Part ID Eng ID Description

01 1.00 EA 131100336 WELDMENT, PC4000 R2D CARRIER SLAVE

02 2.00 EA 161100218 MACHINED, REAR ROLLER PIVOT PIN
03 2.00 EA M10536 ROLLERS, FLANGED, YOKE STYLE, 5 IN
04 2.00 EA M10533 FTG, GREASE, 1/8 NPT, PTF-SS
05 2.00 SH-0500NC-0375 CAPSCR, HEX SOC HD, 1/2-13UNC x 3.75
06 6.00 EA HH-1000NC-0400-GR8 CAPSCR, HEX HD, 1-8UNC x 4.00, GR8
07 6.00 EA LN-1000NC-NL-GR8 LOCKNUT, 1-8UNC, NYLON INSERT, GR8
08 12.00 EA FW-1000-A WASHER, F, 1, PLAIN, TYPE A

Printed: #Name? Page 1 of 1

 3 5

2 4

DETAIL A

7 8 8 6

REV. DESCRIPTION DATE

B UPDATED WITH CHANGES TO 131100336, SEE ECN # CN1424 1/10/2011
A RFM 12/08/2009
TITLE:
© 2009 CANRIG DRILLING TECHNOLOGY CANADA LIMITED
ALL RIGHTS RESERVED
THE DRAWINGS, INFORMATION AND SUBJECT MATTER HEREOF ASSY, CARRIER REAR MOUNT, PC4000
ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE PROPERTY OF
CANRIG DRILLING TECHNOLOGY CANADA LTD, AND ARE NOT
TO BE COPIED, REPRODUCED, OR USED IN ANY MANNER FOR 7475 51 Street SE DRAWN BY: DATE: DRAWING NO: SHEET: REV:
ANY PURPOSE WHATSOEVER WITHOUT WRITTEN CONSENT Calgary, Alberta, Canada, T2C 4L6
OR DIRECTION. Website: www.canrig.com
Bus. (403) 237-6400 Fax. (403) 233-2667
JCR 8/12/2009 121300013 1 OF 1 B
 Engineering
Bill of Material
Part: 121300015
Description: ASSY,CARRIER SKATE DRIVE,PC4000
Eng ID: 0
Drawing ID: 121300015M Rev No: REL-01
Item Qty Units Part ID Description

01 1.00 EA 161100033 SHAFT, SKATE DRIVE

02 1.00 EA DT50202 KEY, DRUM W/ ROUNDED ENDS
03 1.00 EA M10576 BUSH, 3 1/2 BORE, 7/8 x 7/16 KEY
04 1.00 EA 161100032 SKATE WINCH DRUM
05 3.00 EA LW-0625-HS LOCKWASHER, 5/8 HELICAL SPRING
06 3.00 EA HH-0625NC-0450-GR8 CAPSCR, HEX HD, 5/8-11UNC x 4.50, GR8
07 1.00 EA DT50201 KEY STOCK, 7/8 x 1/2 x 2 7/8 LG
08 1.00 EA M10615 BUSH, 3 1/2 BORE, 7/8 x 1/16 KEY
09 9.00 EA LW-0500-HS LOCKWASHER, 1/2, HELICAL SPRING
10 3.00 EA HH-0500NC-0275-GR8 CAPSCR, HEX HD, 1/2-13UNC x 2.75, GR8
11 1.00 EA M10512 SPROCKET, DOUBLE, 45 TEETH, #60 (3/4IN)
12 1.00 EA 131100401 WELDMENT DETAIL, SKATE DRUM MOUNT
13 1.00 EA 161100087 BRG FLANGE
14 6.00 EA HH-0500NC-0100-GR8 CAPSCR, HEX HD, 1/2-13UNC x 1.00, GR8
15 2.00 EA M10495 BRG, SPHER, ROL, 80mm x 140mm x 33mm
16 1.00 EA M10493 RETNG RING, SPIRAL, EXT, 3.15 IN
17 2.00 EA M10487 RETNG RING, SPIRAL, INT, 5.62IN
18 1.00 EA 141100152 CAP PLATE
19 4.00 EA LW-0250-HS LOCKWASHER, 1/4 HELICAL SPRING
20 4.00 EA HH-0250NC-00875-GR8 CAPSCR, HEX HD, 1/4-20UNC x 0.875, GR8
21 1.00 EA M10533 FTG, GREASE, 1/8 NPT, PTF-SS
22 1.00 EA 161100240 MACHINED, SKATE DRUM BRG MOUNT

Printed: 4/23/2015
 4

7
2

5 6

22 21

20 19
15 14 9
17

18

17
16

15

10 9 13

12

11
8

15 2 3 4 8 7 11 15 12

22

18

17 20

21

16

17

1 13 14
A SECTION A-A

CANRIG DRILLING TECHNOLOGY CANADA LIMITED © 2006

THE DRAWINGS, INFORMATION AND SUBJECT MATTER

7475 51 Street SE
HEREOF ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE ASSY, CARRIER SKATE DRIVE, PC4100
Calgary, Alberta, Canada, T2C 4L6 PROPERTY OF CANRIG DRILLING TECHNOLOGY CANADA
Website: www.canrig.com LTD, AND ARE NOT TO BE COPIED, REPRODUCED OR USED
Bus. (403) 237-6400
Fax. (403) 233-2667
IN ANY MANNER FOR ANY PURPOSE WHATSOEVER SHEET 1 OF 1
WITHOUT WRITTEN CONSENT OR DIRECTION.
REV. DESCRIPTION DATE
121300015M
DATE CREATED: PART NO: REV:
REL-01 RFM 11/22/2007 February 07, 2007 12:27:52 AM REL-01
 Engineering
Bill of Material
Part: 121300025
Description: ASSY, PIVOT BLK
Eng ID: 0
Drawing ID: 121300025 Rev No: A
Item Qty Units Part ID Description

01 1.00 EA 161100216 MACHINED, LIFTARM PIVOT BUSHING BLOCK

02 1.00 EA M10508 BUSH, SPHER, 3-3/16 OD, 2 ID, 1-3/4 LG
03 2.00 EA M11121 RETNG RING, INT, 3.325 BORE, 0.095 THK
04 1.00 EA M10533 FTG, GREASE, 1/8 NPT, PTF-SS
05 1.00 EA 161100039 RETAINER BLOCK
06 4.00 EA SH-0750NF-0600 CAPSCR, HEX SOC HD, 3/4-16UNF x 6.00
07 4.00 EA LW-0750-HS-HC LOCKWASHER, 3/4 HELICAL SPR, HIGH COLLAR

Printed: 4/23/2015
 6 7

CANRIG DRILLING TECHNOLOGY CANADA LIMITED © 2006

THE DRAWINGS, INFORMATION AND SUBJECT MATTER

7475 51 Street SE
HEREOF ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE ASSY, PIVOT BLOCK
Calgary, Alberta, Canada, T2C 4L6 PROPERTY OF CANRIG DRILLING TECHNOLOGY CANADA
Website: www.canrig.com LTD, AND ARE NOT TO BE COPIED, REPRODUCED OR USED
Bus. (403) 237-6400
Fax. (403) 233-2667
IN ANY MANNER FOR ANY PURPOSE WHATSOEVER SHEET 1 OF 1
REV. DESCRIPTION DATE WITHOUT WRITTEN CONSENT OR DIRECTION.
A SW2008 UPGRADE / NO CHANGE FROM REL-01 6/17/2008
121300025
DATE CREATED: PART NO: REV:
REL-01 RFM 11/22/2007 28 September, 2007 3:35:19 PM A
 Engineering
Bill of Material
Part: 121300027
Description: ASSY, EYEBOLT, CARRIER CABLE
Eng ID: 1
Drawing ID: 121300027 Rev No: B
Item Qty Units Part ID Description

01 1.00 EA DT110612 EYEBOLT,1-1/4 - 7 x 12, WITH COTTER HOLE

02 2.00 EA HHN-1250NC-2H HEX NUT, HEAVY, 1 1/4-7UNC, 2H
03 1.00 EA M24-3013-010 COTTER PIN, 5/32 x 2.00

Printed: 4/23/2015
 1

B
2

B 13/04/17 RSP REPLACED M10940 WITH M24-3013-010 2103 MZK JCR

A 08/06/16 UPDATED DRAWING FORMAT

REF-01 07/10/31 DR RFM

REV DATE BY REVISION DESCRIPTION ECN CHKD APVD

TITLE:
© 2010 CANRIG DRILLING TECHNOLOGY CANADA LIMITED
ALL RIGHTS RESERVED
THE DRAWINGS, INFORMATION AND SUBJECT MATTER HEREOF ASSY, EYEBOLT, CARRIER CABLE
ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE PROPERTY OF
CANRIG DRILLING TECHNOLOGY CANADA LTD, AND ARE NOT
TO BE COPIED, REPRODUCED, OR USED IN ANY MANNER FOR DRAWN BY: DATE: DRAWING NO: SHEET: REV:
ANY PURPOSE WHATSOEVER WITHOUT WRITTEN CONSENT
OR DIRECTION. DR 10/31/2007 121300027 1 OF 1 B
 Engineering
Bill of Material
Part: 121300035
Description: ASSY, SAFETY PIN, PC4000
Eng ID: 1
Drawing ID: 121300035 Rev No: B
Item Qty Units Part ID Description

01 1.00 EA H10476 CYL, SAFETY PIN, B 1.5, R 1.0, ST 6.68

02 1.00 EA 131100274 WELDMENT, SAFETY PIN SLEEVE
03 1.00 EA SB-0625-0100-0500NC-GR8 SCR, SHLDR, 5/8 DIA x 1.00 LG x 1/2 UNC
04 4.00 EA LW-0250-HS-HC LOCKWASHER, 1/4 HELICAL SPR,HIGH COLLAR
05 4.00 EA SH-0250NC-0325 CAPSCR, HEX SOC HD, 1/4-20UNC x 3.25
06 4.00 EA H15-070120-08-06 ADPT, MALE 1/2 JIC, MALE 3/8 ORB
07 1.00 EA 141500065 MOUNTING PAD, SAFETY PIN
08 1.00 EA M12005 ALLOY STEEL BALL 3/8 DIA
09 2.00 EA SS-0500NC-0050 SETSCREW 1/2-13UNC x 0.50 CUP POINT

Printed: 4/23/2015
 A B IF IN DOUBT......PLEASE ASK! D E

3 2

B 9

4 4

3 3

5 4

2 2

INIT. YY/MM/DD THIRD ANGLE PROJECTION

WELDING PROCEDURE AS PER CANRIG SPECIFICATION - ENG 704, UNLESS NOTED OTHERWISE
MODELED
REMOVE SHARP CORNERS AND BURRS TOLERANCE - UNLESS OTHERWISE SPECIFIED DRAWN 11/13/2007
1 THIS PRINT AND DESIGN AND DETAIL
CASTING ± 1/16 FABRICATING IMPERIAL FABRICATING [METRIC] CHECKED - 1
SHOWN THEREON ARE THE PROPERTY -
0 to 24" ± 1/16" 0 TO 610 mm ± 1 mm
AND INVENTION OF CANRIG DRILLING CONCENTRICITY .005 TIR 24" to 60" ± 1/8" 610 TO 1525 ± 3 mm APPROVED - - DO NOT SCALE
ITEM 9, (SS-0500NC-0050)QTY. OF 1 TECHNOLOGY LTD.. THIS PRINT IS STRAIGHTNESS ± .005 IN 5 INCHES
B 14/08/05 JLH 2472 GRY TDB 60 to 120" ± 3/16" 1525 TO 3048 ± 5 mm MATERIAL
CHANGED TO 2. SQUARENESS ± .010 IN 5 INCHES DRAWING
REPLACED HEX HEAD BOLTS WITH FURNISHED WITH THE UNDERSTANDING 120" to 280" ± 1/4" 3048 TO 7112 ± 7 mm
A 08/06/17 PARALLELISM ± .010 IN 5 INCHES
SOCKET HEAD BOLTS AS BUILT THAT IT IS NOT TO BE REPRODUCED 280" & OVER ± 1/2" 7112 & OVER ± 13 mm
FLATNESS ± .010 or as Shown ASSY, SAFETY PIN, PC400
WITHOUT PERMISSION AND RETURNED MACHINING IMPERIAL MACHINING METRIC
TRUE POSITION .005
REL-01 07/11/22 RFM UPON DEMAND. ALL RIGHTS OF DESIGN DECIMAL .x ± .030" DECIMAL x. ± .8 mm
AND INVENTION ARE RESERVED BY MACHINED SURFACES 125 .xx ± .015" x.x ± .40 mm EST. WEIGHT SCALE
.xxx ± .005" x.xx ± .13 mm
1:2
REV DATE BY REVISION DESCRIPTION ECN CHKD APVD CANRIG DRILLING TECHNOLOGY LTD.. SHEET 1 OF 1 121300035 REV B
MIN. RADIUS UNLESS SHOWN = 0.03 MAX. ANGULAR MACHINING ± 1° FABRICATION ± 2° 20.20 SHEET SIZE B
A B IF IN DOUBT......PLEASE ASK! D E
 Engineering
Bill of Material
Part: 121300036
Description: ASSY, JACKING BOLT, CARRIER
Eng ID: 0
Drawing ID: 121300036 Rev No: A
Item Qty Units Part ID Description

01 1.00 EA 161100250 MACHINED, JACKING PIN

02 1.00 EA HH-1000NS-0400-GR8 CAPSCR, HEX HD, 1-14UNS x 4.00, GR8
03 1.00 EA HN-1000NS-GR8 HEX NUT, 1-14UNS, GR8
04 1.00 EA LW-0500-HS LOCKWASHER, 1/2, HELICAL SPRING
05 1.00 EA HH-0500NC-0325-GR8 CAPSCR, HEX HD, 1/2-13UNC x 3.25, GR8

Printed: 4/23/2015
 4 5 1

3 2

CANRIG DRILLING TECHNOLOGY CANADA LIMITED © 2006

THE DRAWINGS, INFORMATION AND SUBJECT MATTER

7475 51 Street SE
HEREOF ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE ASSY, JACKING BOLT, CARRIER
Calgary, Alberta, Canada, T2C 4L6 PROPERTY OF CANRIG DRILLING TECHNOLOGY CANADA
Website: www.canrig.com LTD, AND ARE NOT TO BE COPIED, REPRODUCED OR USED
Bus. (403) 237-6400
Fax. (403) 233-2667
IN ANY MANNER FOR ANY PURPOSE WHATSOEVER SHEET 1 OF 1
REV. DESCRIPTION DATE WITHOUT WRITTEN CONSENT OR DIRECTION.
A SW2008 UPGRADE / NO CHANGE FROM REL-01 6/17/2008
121300036
DATE CREATED: PART NO: REV:
REL-01 RFM 11/22/2007 12 November, 2007 11:01:42 AM A
 Engineering
Bill of Material
Part: 121300037
Description: ASSY, KICKER, FRONT, PC4000
Eng ID: 1
Drawing ID: 121300037 Rev No: A
Item Qty Units Part ID Description

01 1.00 EA 131100339 WELDMENT, KICKER PIVOT

02 1.00 EA H10334 CYL, HYD, BORE 2.0, ROD 1.25, STRK 4.75
03 3.00 EA 161100221 MACHINED, PC4000 KICKER PIN
04 3.00 EA M10668 GREASE NIPPLE, 1/8 NPT, 90°
05 1.00 EA H15-070120-08-06 ADPT, MALE 1/2 JIC, MALE 3/8 ORB
06 1.00 EA H15-070220-08-06 ELL 90°, MALE 1/2 JIC, MALE 3/8 ORB
07 3.00 EA SH-0312NF-0150-SS CAPSCR, HEX SOC HD, 5/16-24UNF x 1.50,SS
08 1.00 EA H15-090109B-06 PLUG, SOC HEX, 3/8 ORB

Printed: 4/23/2015
 1

7 2 3 6 5

REV. DESCRIPTION DATE

A RFM 6/17/2008
TITLE:
© 2009 CANRIG DRILLING TECHNOLOGY CANADA LIMITED
ALL RIGHTS RESERVED
THE DRAWINGS, INFORMATION AND SUBJECT MATTER HEREOF ASSY, KICKER, FRONT, PC4000
ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE PROPERTY OF
CANRIG DRILLING TECHNOLOGY CANADA LTD, AND ARE NOT
TO BE COPIED, REPRODUCED, OR USED IN ANY MANNER FOR 7475 51 Street SE DRAWN BY: DATE: DRAWING NO: SHEET: REV:
ANY PURPOSE WHATSOEVER WITHOUT WRITTEN CONSENT Calgary, Alberta, Canada, T2C 4L6
OR DIRECTION. Website: www.canrig.com 11/14/2007 121300037 1 OF 1 A
Bus. (403) 237-6400 Fax. (403) 233-2667
 Engineering
Bill of Material
Part: 121300038
Description: ASSY, KICKER, MIDDLE, PC4000
Eng ID: 0
Drawing ID: 121300038 Rev No: A
Item Qty Units Part ID Description

01 1.00 EA 131100339 WELDMENT, KICKER PIVOT

02 1.00 EA H10334 CYL, HYD, BORE 2.0, ROD 1.25, STRK 4.75
03 3.00 EA 161100221 MACHINED, PC4000 KICKER PIN
04 3.00 EA M10668 GREASE NIPPLE, 1/8 NPT, 90°
05 2.00 EA H15-070120-08-06 ADPT, MALE 1/2 JIC, MALE 3/8 ORB
06 1.00 EA 158100037 PLUG, 1/8 NPT, 3/16 ORIFICE
07 1.00 EA 158100010 TEE, MALE, 1/2 JIC, 3/8 ORB W/ 1/8 NPT
08 3.00 EA SH-0312NF-0150-SS CAPSCR, HEX SOC HD, 5/16-24UNF x 1.50,SS

Printed: 4/23/2015
 1

8
6
2
3

REV. DESCRIPTION DATE

A RFM 6/17/2008
TITLE:
© 2009 CANRIG DRILLING TECHNOLOGY CANADA LIMITED

THE DRAWINGS, INFORMATION AND SUBJECT MATTER HEREOF ASSY, KICKER, MIDDLE, PC4000
ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE PROPERTY OF
CANRIG DRILLING TECHNOLOGY CANADA LTD, AND ARE NOT
TO BE COPIED, REPRODUCED, OR USED IN ANY MANNER FOR DRAWN BY: DATE: DRAWING NO: SHEET: REV:
ANY PURPOSE WHATSOEVER WITHOUT WRITTEN CONSENT Calgary, Alberta, Canada, T2C 4L6
OR DIRECTION. Website: www.canrig.com 11/14/2007 121300038 1 OF 1 A
Bus. (403) 237-6400 Fax. (403) 233-2667
 Engineering
Bill of Material
Part: 121300039
Description: ASSY, KICKER, REAR, PC4000
Eng ID: 0
Drawing ID: 121300039 Rev No: A
Item Qty Units Part ID Description

01 1.00 EA 131100339 WELDMENT, KICKER PIVOT

02 1.00 EA H10334 CYL, HYD, BORE 2.0, ROD 1.25, STRK 4.75
03 3.00 EA 161100221 MACHINED, PC4000 KICKER PIN
04 3.00 EA M10668 GREASE NIPPLE, 1/8 NPT, 90°
05 2.00 EA H15-070120-08-06 ADPT, MALE 1/2 JIC, MALE 3/8 ORB
06 1.00 EA 158100036 PLUG, 1/8 NPT, 1/8 ORIFICE
07 1.00 EA 158100010 TEE, MALE, 1/2 JIC, 3/8 ORB W/ 1/8 NPT
08 3.00 EA SH-0312NF-0150-SS CAPSCR, HEX SOC HD, 5/16-24UNF x 1.50,SS

Printed: 4/23/2015
 1

8
6
2
3

REV. DESCRIPTION DATE

A RFM 6/17/2008
TITLE:
© 2009 CANRIG DRILLING TECHNOLOGY CANADA LIMITED
ALL RIGHTS RESERVED
THE DRAWINGS, INFORMATION AND SUBJECT MATTER HEREOF ASSY, KICKER, REAR, PC4000
ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE PROPERTY OF
CANRIG DRILLING TECHNOLOGY CANADA LTD, AND ARE NOT
TO BE COPIED, REPRODUCED, OR USED IN ANY MANNER FOR 7475 51 Street SE DRAWN BY: DATE: DRAWING NO: SHEET: REV:
ANY PURPOSE WHATSOEVER WITHOUT WRITTEN CONSENT Calgary, Alberta, Canada, T2C 4L6
OR DIRECTION. Website: www.canrig.com GDF 11/14/2007 121300039 1 OF 1 A
Bus. (403) 237-6400 Fax. (403) 233-2667
 Engineering
Bill of Material
Part: 121300040
Description: ASSY, V-ROLLER, PC4000
Eng ID: 0
Drawing ID: 121300040M Rev No: A
Item Qty Units Part ID Description

01 1.00 EA 161100241 MACHINED, PC4000 V-ROLLER AXLE

02 1.00 EA 161100094 V-ROLLER, STEEL
03 2.00 EA M10533 FTG, GREASE, 1/8 NPT, PTF-SS
04 2.00 EA 152100033 SPACER, PC4000, V-ROLLER
05 2.00 EA HH-0375NC-0500-GR8 CAPSCR, HEX HD, 3/8-16UNC x 5.00, GR8
06 2.00 EA LN-0375NC-NL-GR8 LOCKNUT, 3/8-16UNC, NYLOCK, GR8

Printed: 4/23/2015
 6 5 1

CANRIG DRILLING TECHNOLOGY CANADA LIMITED © 2006

THE DRAWINGS, INFORMATION AND SUBJECT MATTER

7475 51 Street SE
HEREOF ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE ASSY, V-ROLLER, PC4000
Calgary, Alberta, Canada, T2C 4L6 PROPERTY OF CANRIG DRILLING TECHNOLOGY CANADA
Website: www.canrig.com LTD, AND ARE NOT TO BE COPIED, REPRODUCED OR USED
Bus. (403) 237-6400
Fax. (403) 233-2667
IN ANY MANNER FOR ANY PURPOSE WHATSOEVER SHEET 1 OF 1
REV. DESCRIPTION DATE WITHOUT WRITTEN CONSENT OR DIRECTION.
A SW2008 UPGRADE / NO CHANGE FROM REL-01 6/17/2008
121300040M
DATE CREATED: PART NO: REV:
REL-01 RFM 11/22/2007 12 November, 2007 2:49:30 PM A
 Engineering
Bill of Material
Part: 121300042
Description: ASSY, OVERSHOOT DOG, PC4000
Eng ID: 1
Drawing ID: 121300042 Rev No: C
Item Qty Units Part ID Description

01 1.00 EA 131100338 WELDMENT, OVERSHOOT DOG

02 2.00 EA 141100698 OVERSHOOT DOG HOOK
03 2.00 EA HH-0750NC-0300-GR8 CAPSCR, HEX HD, 3/4-10UNC x 3.00, GR8
04 4.00 EA FW-0750-A WASHER, F, 3/4, PLAIN, TYPE A
05 2.00 EA LN-0750NC-NL-GR8 LOCKNUT, 3/4-10UNC, NYLOCK, GR8
06 8.00 EA HH-0625NC-0225-GR8 CAPSCR, HEX HD, 5/8-11UNC x 2.25, GR8
07 16.00 EA FW-0625-A WASHER, F, 5/8, PLAIN, TYPE A
08 8.00 EA LN-0625NC-NL-GR8 LOCKNUT, 5/8-11UNC, NYLOCK, GR8

Printed: 4/23/2015
 C
3 4 4 5

6 7 7 8

C 11/25/2014 SR CHANGED BOLTS, NUTS (ITEMS #3; 5) ORIENTATION 2539 AD MA

B 4/2/2014 MB CHANGED LENGTH FROM 2 LG TO 2 1/4 LG (ECN 1990) 1990 GRY GDF

REV. DATE BY DESCRIPTION ECN CHK APP

TITLE:
© 2010 CANRIG DRILLING TECHNOLOGY CANADA LIMITED
ALL RIGHTS RESERVED
THE DRAWINGS, INFORMATION AND SUBJECT MATTER HEREOF ASSY, OVERSHOOT DOG, PC4000
ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE PROPERTY OF
CANRIG DRILLING TECHNOLOGY CANADA LTD, AND ARE NOT
TO BE COPIED, REPRODUCED, OR USED IN ANY MANNER FOR 9307 52 Street SE DRAWN BY: DATE: DRAWING NO: SHEET: REV:
ANY PURPOSE WHATSOEVER WITHOUT WRITTEN CONSENT Calgary, Alberta, Canada, T2C 2R4
OR DIRECTION. Website: www.canrig.com
Bus. (403) 237-6400 Fax. (403) 233-2667
JCR 7/8/2011 121300042 1 OF 1 C
 Engineering
Bill of Material
Part: 121300043
Description: ASSY,VLV BANK,CARRIER,PC4000,OUTFITTED
Eng ID: 2
Drawing ID: 121300043 Rev No: B
Item Qty Units Part ID Description

01 1.00 EA AY50448 ASSY, HYD, CARRIER VLV, PVG32

02 1.00 EA H10317 DIRECTIONAL VALVE
03 2.00 EA H15-070120-08-12 ADPT, MALE 1/2 JIC, MALE 3/4 ORB
04 1.00 EA H15-0506-08-06 ADAPTER, FEM SWV 1/2 JIC, 3/8 MALE ORB
06 1.00 EA H15-070120-08-06 ADPT, MALE 1/2 JIC, MALE 3/8 ORB
07 2.00 EA H15-070220-16-12 ELL 90°, MALE 1 JIC, MALE 3/4 ORB
08 1.00 EA H15-070432-16-16 TEE,FEM SWV RUN 1 IN JIC, MALE 1 IN JIC
09 1.00 EA H15-070123A-16-08 REDUCER, JIC 1 FEM, 1/2 MALE
10 10.00 EA H15-070120-08-10 ADPT, MALE 1/2 JIC, MALE 5/8 ORB
11 1.00 EA H15-070220-04-05 ELL 90°, MALE 1/4 JIC, MALE #5 ORB
12 1.00 EA H15-2018-04-04 ADPT, FEM SWVL 1/4 JIC, MALE 1/4 NPT
13 1.00 EA N10298 TRANSDUCER, PRESS, 7500 PSI, 4-20mA
14 4.00 EA HH-0312NC-0100-GR8 CAPSCR, HEX HD, 5/16-18UNC x 1.00, GR8
15 4.00 EA LW-0312-HS LOCKWASHER, 5/16 HELICAL SPRING
16 4.00 EA FW-0312-A WASHER, F, 5/16, PLAIN, TYPE A

Printed: 4/23/2015
 B
13

12

11

9
1

8 14 15 16

4
2

10

6 3

REV. DATE DESCRIPTION CHKD APVD

ITEM 5, H15-070220-08-12 (OMITTED) REPLACED TO H15-070120- CANRIG DRILLING TECHNOLOGY CANADA LIMITED © 2006
B 5/20/2014 08-12; ITEM 11, H15-070220-04-04 REPLACED TO H15-070220-04- GRY TDB
05; ITEM 14, HH-0312NC-0075-GR8 REPLACED TO HH-0312NC- THE DRAWINGS, INFORMATION AND SUBJECT MATTER
0100-GR8. ECN#2387 7475 51 Street SE
HEREOF ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE ASSY, VLV STACK, CARRIER
PROPERTY OF CANRIG DRILLING TECHNOLOGY CANADA
A 6/17/2008 SW2008 UPGRADE / NO CHANGE FROM REL-02 Calgary, Alberta, Canada, T2C 4L6
Website: www.canrig.com LTD, AND ARE NOT TO BE COPIED, REPRODUCED OR USED
Bus. (403) 237-6400
Fax. (403) 233-2667
IN ANY MANNER FOR ANY PURPOSE WHATSOEVER SHEET 1 OF 1
REL-02 1/30/2008 ADDED MISSING FITTINGS AND TRANSDUCER WITHOUT WRITTEN CONSENT OR DIRECTION.

121300043
DATE CREATED: PART NO: REV:
REL-01 11/22/2007 RFM Tuesday, November 13, 2007 1:26:36 PM B
 Engineering
Bill of Material
Part: 121300044
Description: ASSY, ACCESS COVER, CARRIER
Eng ID: 0
Drawing ID: 121300044 Rev No: A
Item Qty Units Part ID Description

01 1.00 EA 141100323 ACCESS COVER

02 4.00 EA HH-0375NC-0075-GR8 CAPSCR, HEX HD, 3/8-16UNC x 0.75, GR8
03 4.00 EA LW-0375-HS LOCKWASHER, 3/8 HELICAL SPRING
04 4.00 EA FW-0375-A WASHER, F, 3/8, PLAIN, TYPE A

Printed: 4/23/2015
 1

4 3 2

CANRIG DRILLING TECHNOLOGY CANADA LIMITED © 2006

THE DRAWINGS, INFORMATION AND SUBJECT MATTER

7475 51 Street SE
HEREOF ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE ASSY, ACCESS COVER, CARRIER
Calgary, Alberta, Canada, T2C 4L6 PROPERTY OF CANRIG DRILLING TECHNOLOGY CANADA
Website: www.canrig.com LTD, AND ARE NOT TO BE COPIED, REPRODUCED OR USED
Bus. (403) 237-6400
Fax. (403) 233-2667
IN ANY MANNER FOR ANY PURPOSE WHATSOEVER SHEET 1 OF 1
REV. DESCRIPTION DATE WITHOUT WRITTEN CONSENT OR DIRECTION.
A SW2008 UPGRADE / NO CHANGE FROM REL-01 6/17/2008
121300044
DATE CREATED: PART NO: REV:
REL-01 RFM 11/22/2007 14 November, 2007 4:21:59 PM A
 Engineering
Bill of Material
Part: 121300045
Description: ASSY, CA GUIDE, FRONT, CARRIER
Eng ID: 0
Drawing ID: 121300045 Rev No: REL-01
Item Qty Units Part ID Description

01 1.00 EA 161500002 CABLE GUIDE

02 6.00 EA SH-0500NC-0175 CAPSCR, HEX SOC HD, 1/2-13UNC x 1.75
03 6.00 EA FW-0500-A WASHER, F, 1/2, PLAIN, TYPE A
04 6.00 EA LN-0500NC-NL-GR8 LOCKNUT, 1/2-13UNC, NYLOCK, GR8

Printed: 4/23/2015
 1

4 3 2

CANRIG DRILLING TECHNOLOGY CANADA LIMITED © 2006

THE DRAWINGS, INFORMATION AND SUBJECT MATTER

7475 51 Street SE
HEREOF ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE ASSY, CABLE GUIDE, FRONT, CARRIER
Calgary, Alberta, Canada, T2C 4L6 PROPERTY OF CANRIG DRILLING TECHNOLOGY CANADA
Website: www.canrig.com LTD, AND ARE NOT TO BE COPIED, REPRODUCED OR USED
Bus. (403) 237-6400
Fax. (403) 233-2667
IN ANY MANNER FOR ANY PURPOSE WHATSOEVER SHEET 1 OF 1
WITHOUT WRITTEN CONSENT OR DIRECTION.
REV. DESCRIPTION DATE
121300045
DATE CREATED: PART NO: REV:
REL-01 RFM 11/22/2007 November 14, 2007 3:56:59 PM REL-01
 Engineering
Bill of Material
Part: 121300046
Description: ASSY, SKATE WINCH, PC4000
Eng ID: 2
Drawing ID: 121300046 Rev No: C
Item Qty Units Part ID Description

01 1.00 EA 121300015 ASSY,CARRIER SKATE DRIVE,PC4000

02 6.00 EA HH-0500NC-0200-GR8 CAPSCR, HEX HD, 1/2-13UNC x 2.00, GR8
03 20.00 EA FW-0500-A WASHER, F, 1/2, PLAIN, TYPE A
04 4.00 EA LN-0500NC-NL-GR8 LOCKNUT, 1/2-13UNC, NYLOCK, GR8
05 6.00 EA HH-0500NC-0125-GR8 CAPSCR, HEX HD, 1/2-13UNC x 1.25, GR8
06 12.00 EA LW-0500-HS LOCKWASHER, 1/2, HELICAL SPRING
07 1.00 EA AY51595 ASSY, CHAIN, SKATE DRIVE, PC4000
08 1.00 EA 161100202 SPROCKET, DOUBLE #60 15 TEETH
09 1.00 EA 131100151 SKATE DRIVE MOTOR MOUNT
10 1.00 EA H10316 MOTOR, HYD, 40 HP, 400cc/REV, 305 RPM
11 1.00 EA H10486 ADPT, STR, #4 JIC TO #4 BSPP
12 1.00 EA H10488 ADPT, 90°, #8 JIC TO #6 BSPP
13 2.00 EA H10484 ADPT, STR, #8 JIC TO #12 BSPP
14 4.00 EA HH-0500NC-0275-GR8 CAPSCR, HEX HD, 1/2-13UNC x 2.75, GR8
15 1.00 EA 161100217 MACHINED, SKATE MOTOR MOUNT PIN
16 1.00 EA M10574 RETNG RING, EXT, 1.50 SHAFT, 0.050 THK
17 2.00 EA M10490 RETNG RING, SPIRAL, EXT, 2.00 IN
18 1.00 EA M10974 TRNBKL, JAW & JAW, 1x18, J&J GALVANIZED
19 1.00 EA M10533 FTG, GREASE, 1/8 NPT, PTF-SS
20 1.00 EA M11208 CHAIN CONNECTOR, DAIDO, #60-2

Printed: 4/23/2015
 A B IF IN DOUBT......PLEASE ASK! D E

4 4

15 16
17 17
13 13 C C C

15 2 3 6
17 17
C 14 4 3 3
20
7 1
18 16 8
6 5 3
3 3
9 19

10 11 12

ITEM 18 , M10974, REMOVED FOR CLARITY

2 2
19

INIT. YY/MM/DD THIRD ANGLE PROJECTION

WELDING PROCEDURE AS PER CANRIG SPECIFICATION - ENG 704, UNLESS NOTED OTHERWISE
MODELED JCR 07/11/15
REMOVE SHARP CORNERS AND BURRS TOLERANCE - UNLESS OTHERWISE SPECIFIED DRAWN JCR 07/11/15
1 THIS PRINT AND DESIGN AND DETAIL FABRICATING IMPERIAL FABRICATING [METRIC]
SHOWN THEREON ARE THE PROPERTY CASTING ± 1/16 CHECKED DR 07/11/15 1
0 to 24" ± 1/16" 0 TO 610 mm ± 1 mm
AND INVENTION OF CANRIG DRILLING CONCENTRICITY .005 TIR 24" to 60" ± 1/8" 610 TO 1525 APPROVED
± 3 mm DH 07/11/15 DO NOT SCALE
REPLACED ITEM 7 (M10696) WITH (AY51595), TECHNOLOGY LTD.. THIS PRINT IS STRAIGHTNESS ± .005 IN 5 INCHES 60 to 120" ± 3/16" 1525 TO 3048 ± 5 mm MATERIAL
SQUARENESS ± .010 IN 5 INCHES DRAWING
C 14/06/17 MRB REPLACED ITEM 2 (HH-0500NC-0250-GR8) 2421 GRY GDF FURNISHED WITH THE UNDERSTANDING 120" to 280" ± 1/4" 3048 TO 7112 ± 7 mm
PARALLELISM ± .010 IN 5 INCHES
WITH (HH-0500NC-0200-GR8 THAT IT IS NOT TO BE REPRODUCED 280" & OVER ± 1/2" 7112 & OVER ± 13 mm
ITEM 16, EXTERNAL SNAP RING WAS FLATNESS ± .010 or as Shown ASSY, SKATE WINCH, PC4000
MACHINING IMPERIAL MACHINING METRIC
B 13/04/08 RMK 2071 MZK SH WITHOUT PERMISSION AND RETURNED TRUE POSITION .005
SPIRALOX RETAINING RING UPON DEMAND. ALL RIGHTS OF DESIGN DECIMAL .x ± .030" DECIMAL x. ± .8 mm
AND INVENTION ARE RESERVED BY MACHINED SURFACES 125 .xx ± .015" x.x ± .40 mm EST. WEIGHT SCALE
REV DATE BY REVISION DESCRIPTION .xxx ± .005" x.xx ± .13 mm
1:8
ECN CHKD APVD CANRIG DRILLING TECHNOLOGY LTD.. SHEET 1 OF 1 121300046 REV C
MIN. RADIUS UNLESS SHOWN = 0.03 MAX. ANGULAR MACHINING ± 1° FABRICATION ± 2° 331.3 lbs SHEET SIZE B
A B IF IN DOUBT......PLEASE ASK! D E
 Engineering
Bill of Material
Part: 121300047
Description: ASSY, ELEC BOX, CARRIER
Eng ID: 0
Drawing ID: 121300047 Rev No: A
Item Qty Units Part ID Description

01 0.00 EA AY50143 ASSY, ELEC, CARRIER J-BOX, PC3000/PC4000

02 4.00 EA HH-0250NC-0100-GR8 CAPSCR, HEX HD, 1/4-20UNC x 1.00, GR8
03 8.00 EA FW-0250-A WASHER, F, 1/4, PLAIN, TYPE A
04 4.00 EA LN-0250NC-NL-GR8 LOCKNUT, 1/4-20UNC, NYLOCK, GR8

Printed: 4/23/2015
 1

2 3 3 4

CANRIG DRILLING TECHNOLOGY CANADA LIMITED © 2006

THE DRAWINGS, INFORMATION AND SUBJECT MATTER

7475 51 Street SE
HEREOF ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE ASSY, ELEC BOX, CARRIER
Calgary, Alberta, Canada, T2C 4L6 PROPERTY OF CANRIG DRILLING TECHNOLOGY CANADA
Website: www.canrig.com LTD, AND ARE NOT TO BE COPIED, REPRODUCED OR USED
Bus. (403) 237-6400
Fax. (403) 233-2667
IN ANY MANNER FOR ANY PURPOSE WHATSOEVER SHEET 1 OF 1
REV. DESCRIPTION DATE WITHOUT WRITTEN CONSENT OR DIRECTION.
A SW2008 UPGRADE / NO CHANGE FROM REL-01 6/17/2008
121300047
DATE CREATED: PART NO: REV:
REL-01 RFM 11/22/2007 15 November, 2007 2:27:46 PM A
 Engineering
Bill of Material
Part: 121300050
Description: ASSY, SKATE SHEAVE, PC4000
Eng ID: 0
Drawing ID: 121300050M Rev No: A
Item Qty Units Part ID Description

01 1.00 EA 121300003 CARRIER SHEAVE ASSY

02 2.00 EA 131101004 WELDMENT, SHEAVE TENSION ROD, SHORT
03 2.00 EA HN-1000NC-GR8 HEX NUT, 1-8UNC, GR8
04 1.00 EA 141100321 SKATE SHEAVE ADJUSTMENT
05 1.00 EA LW-0375-HS LOCKWASHER, 3/8 HELICAL SPRING
06 1.00 EA HH-0375NC-0150-GR8 CAPSCR, HEX HD, 3/8-16UNC x 1.50, GR8

Printed: 4/23/2015
 5 6
4
1

CANRIG DRILLING TECHNOLOGY CANADA LIMITED © 2006

THE DRAWINGS, INFORMATION AND SUBJECT MATTER

7475 51 Street SE
HEREOF ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE ASSY, SKATE SHEAVE, PC4100
Calgary, Alberta, Canada, T2C 4L6 PROPERTY OF CANRIG DRILLING TECHNOLOGY CANADA
Website: www.canrig.com LTD, AND ARE NOT TO BE COPIED, REPRODUCED OR USED
Bus. (403) 237-6400
Fax. (403) 233-2667
IN ANY MANNER FOR ANY PURPOSE WHATSOEVER SHEET 1 OF 1
REV. DESCRIPTION DATE WITHOUT WRITTEN CONSENT OR DIRECTION.
A SW2008 UPGRADE / NO CHANGE FROM REL-01 6/17/2008
121300050M
DATE CREATED: PART NO: REV:
REL-01 RFM 11/22/2007 16 November, 2007 4:51:31 PM A
 Engineering
Bill of Material
Part: 121300060
Description: ASSY,COMPACT SKATE,REVERSE VEE
Eng ID: 1
Drawing ID: 121300060 Rev No: A
Item Qty Units Part ID Description

01 1.00 EA 131300006 WELDMENT,SKATE BODY,REVERSE VEE

02 1.00 EA 131100155 SKATE CAGE
03 4.00 EA 131100257 SKATE RETAINER
04 2.00 EA 141500004 SKATE SLIDER PLASTIC
05 6.00 EA HH-0375NC-0225-GR8 CAPSCR, HEX HD, 3/8-16UNC x 2.25, GR8
06 12.00 EA FW-0375-A WASHER, F, 3/8, PLAIN, TYPE A
07 6.00 EA LN-0375NC-NL-GR8 LOCKNUT, 3/8-16UNC, NYLOCK, GR8
08 2.00 EA HH-0750NC-0350-GR8 CAPSCR, HEX HD, 3/4-10UNC x 3.50, GR8
09 4.00 EA FW-0750-A WASHER, F, 3/4, PLAIN, TYPE A
10 2.00 EA LN-0750NC-NL-GR8 LOCKNUT, 3/4-10UNC, NYLOCK, GR8
11 12.00 EA FH-0375NC-0100 CAPSCREW, FLAT HD, 3/8UNC x 1.00
12 1.00 EA HH-1000NC-0400-GR8 CAPSCR, HEX HD, 1-8UNC x 4.00, GR8
13 2.00 EA FW-1000-A WASHER, F, 1, PLAIN, TYPE A
14 1.00 EA LN-1000NC-NL-GR8 LOCKNUT, 1-8UNC, NYLON INSERT, GR8
15 1.00 EA 131300007 GUIDE,SKATE TUBE LEAD IN
16 6.00 EA FH-0500NC-0150 CAPSCREW, FLAT HD, 1/2UNC x 1.50
17 2.00 EA FW-0500-A WASHER, F, 1/2, PLAIN, TYPE A
18 2.00 EA HH-0500NC-0150-GR8 CAPSCR, HEX HD, 1/2-13UNC x 1.50, GR8
19 2.00 EA LW-0500-HS LOCKWASHER, 1/2, HELICAL SPRING

Printed: 4/23/2015
 12 13 13 14
10 9 9 8

16

15

18 19 17

7 6 6 5 10 9 9 8

4
3
11

15 1/2"

13 3/8" MAX

REV. DESCRIPTION DATE

A ITEMS 2 AND 15 MODIFIED, SEE ECN# CN1290. 10-Jun-2009
01 ITEM 15 CHANGED. 11-May-2009
00 RFM 3/17/2009
TITLE:
© 2009 CANRIG DRILLING TECHNOLOGY CANADA LIMITED
ALL RIGHTS RESERVED
THE DRAWINGS, INFORMATION AND SUBJECT MATTER HEREOF ASSY, COMPACT SKATE, REVERSE VEE
ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE PROPERTY OF
CANRIG DRILLING TECHNOLOGY CANADA LTD, AND ARE NOT
TO BE COPIED, REPRODUCED, OR USED IN ANY MANNER FOR 7475 51 Street SE DRAWN BY: DATE: DRAWING NO: SHEET: REV:
ANY PURPOSE WHATSOEVER WITHOUT WRITTEN CONSENT Calgary, Alberta, Canada, T2C 4L6
OR DIRECTION. Website: www.canrig.com BK 16-Mar-2009 121300060 1 OF 1 A
Bus. (403) 237-6400 Fax. (403) 233-2667
 Engineering
Bill of Material
Part: 121300073
Description: ASSY,CABLE CAPTURE,CARRIER
Eng ID: 1
Drawing ID: 121300073 Rev No: B
Item Qty Units Part ID Description

01 1.00 EA 141500021 SKATE CABLE RETAINER PLASTIC

02 4.00 EA HH-0375NC-0150-GR8 CAPSCR, HEX HD, 3/8-16UNC x 1.50, GR8
03 10.00 EA FW-0375-A WASHER, F, 3/8, PLAIN, TYPE A
04 4.00 EA LN-0375NC-NL-GR8 LOCKNUT, 3/8-16UNC, NYLOCK, GR8
05 1.00 EA 141100595 PLATE, CABLE CAPTURE MOUNT
06 2.00 EA LW-0375-HS LOCKWASHER, 3/8 HELICAL SPRING
07 2.00 EA HH-0375NC-0100-GR8 CAPSCR, HEX HD, 3/8-16UNC x 1.00, GR8

Printed: 4/23/2015
 5

3 6 7

4 3 3 2

REV. DESCRIPTION DATE

B ADDED HARDWARE AND ITEM 141100595, SEE ECN# CN1357. 11-Dec-2009
A RFM 14-May-2009
TITLE:
© 2009 CANRIG DRILLING TECHNOLOGY CANADA LIMITED
ALL RIGHTS RESERVED
THE DRAWINGS, INFORMATION AND SUBJECT MATTER HEREOF ASSY, CABLE CAPTURE, CARRIER
ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE PROPERTY OF
CANRIG DRILLING TECHNOLOGY CANADA LTD, AND ARE NOT
TO BE COPIED, REPRODUCED, OR USED IN ANY MANNER FOR 7475 51 Street SE DRAWN BY: DATE: DRAWING NO: SHEET: REV:
ANY PURPOSE WHATSOEVER WITHOUT WRITTEN CONSENT Calgary, Alberta, Canada, T2C 4L6
OR DIRECTION. Website: www.canrig.com TLK 07-Apr-2009 121300073 1 OF 1 B
Bus. (403) 237-6400 Fax. (403) 233-2667
 Engineering
Bill of Material
Part: AY50389
Description: ASSY, CARRIER CBAL VLV
Eng ID: 1
Drawing ID: AY50389 Rev No: B
Item Qty Units Part ID Description

01 1.00 EA H10642 SHUTTLE VALVE

02 3.00 EA H15-070120-08-08 ADPT, MALE 1/2 JIC, MALE 1/2 ORB
03 1.00 EA H15-070220-04-04 ELL 90°, MALE 1/4 JIC, MALE 1/4 ORB
04 1.00 EA H15-070220-08-08 ELL 90°, MALE 1/2 JIC, MALE 1/2 ORB
05 1.00 EA H10324 VLV, HYD, CARTRIDGE, CBAL, 3:1 RATIO
06 1.00 EA 161200001 SKATE MANIFOLD
07 2.00 EA H15-090109B-04 PLUG, SOC HEX, 1/4 ORB
08 2.00 EA HH-0375NC-0250-GR8 CAPSCR, HEX HD, 3/8-16UNC x 2.50, GR8
09 4.00 EA FW-0375-A-N WASHER, F, 3/8, PLAIN, NARROW, TYPE A
10 2.00 EA LN-0375NC-NL-GR8 LOCKNUT, 3/8-16UNC, NYLOCK, GR8

Printed: 4/23/2015
 4

2
6

3 1

10

2
7

REV. DESCRIPTION DATE

B DISSOLVED 121300023 INTO AY50389 AS 121300023 WAS MODIFIED TO 10/29/2009
SPECIFICALLY FIT THE PC3000
A SW2008 UPGRADE / NO CHANGE FROM REL-01 6/17/2008
REL-01 RFM 11/22/2007
TITLE:
© 2009 CANRIG DRILLING TECHNOLOGY CANADA LIMITED
ALL RIGHTS RESERVED
THE DRAWINGS, INFORMATION AND SUBJECT MATTER HEREOF ASSY, CBAL VLV, CARRIER
ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE PROPERTY OF
CANRIG DRILLING TECHNOLOGY CANADA LTD, AND ARE NOT
TO BE COPIED, REPRODUCED, OR USED IN ANY MANNER FOR 7475 51 Street SE DRAWN BY: DATE: DRAWING NO: SHEET: REV:
ANY PURPOSE WHATSOEVER WITHOUT WRITTEN CONSENT Calgary, Alberta, Canada, T2C 4L6
OR DIRECTION. Website: www.canrig.com 11/2/2007 AY50389 1 OF 1 B
Bus. (403) 237-6400 Fax. (403) 233-2667
 Engineering
Bill of Material

Part: AY51030
Description: HOSE ASSY, CARRIER, PC4000
Eng ID: 0
Drawing ID: 183100008 Rev No: A
Item Qty Units Part ID Eng ID Description

T08 1.00 EA DT50317 TUBE,#8 F JIC,163IN,LG

T09 1.00 EA DT50318 TUBE,#8 F JIC,520IN,LG
T10 1.00 EA DT50319 TUBE,#8 F JIC,519IN,LG
T11 1.00 EA DT50320 TUBE,#8 F JIC,515IN,LG
T12 1.00 EA DT50321 TUBE,#8 F JIC,210IN,LG
T13 1.00 EA DT50322 TUBE,#8 F JIC,206IN,LG
T14 1.00 EA DT50321 TUBE,#8 F JIC,210IN,LG
T15 1.00 EA DT50322 TUBE,#8 F JIC,206IN,LG
T16 1.00 EA DT50321 TUBE,#8 F JIC,210IN,LG
T17 1.00 EA DT50322 TUBE,#8 F JIC,206IN,LG
T18 1.00 EA DT50321 TUBE,#8 F JIC,210IN,LG
T19 1.00 EA DT50322 TUBE,#8 F JIC,206IN,LG

Printed: #Name? Page 2 of 2

 Engineering
Bill of Material

Part: AY51030
Description: HOSE ASSY, CARRIER, PC4000
Eng ID: 0
Drawing ID: 183100008 Rev No: A
Item Qty Units Part ID Eng ID Description

H082 1.00 EA F471TC0606080808-18.50-X-1 0 HOSE ASSY, 1/2, SWV STR, SWV STR, 18.50
H083 1.00 EA F471TC0603080808-98.75-X-9 VSA HOSE ASSY, 1/2, SWV STR, MALE STR, 98.75
H084 1.00 EA F471TC0603080808-43.75-X-4 VSA HOSE ASSY, 1/2, SWV STR, MALE STR, 43.75
H085 1.00 EA F471TC0603080808-97.75-X-9 VSA HOSE ASSY, 1/2, SWV STR, MALE STR, 97.75
H086 1.00 EA F471TC0603080808-25.25-X-2 VSA HOSE ASSY, 1/2, SWV STR, MALE STR, 25.25
H087 1.00 EA F471TC0637080808-13.75-X-1 0 HOSE ASSY, 1/2, SWV STR, 45°, 13.75
H088 1.00 EA F471TC0603080808-98.75-X-9 VSA HOSE ASSY, 1/2, SWV STR, MALE STR, 98.75
H089 1.00 EA F471TC0603080808-30.75-X-2 VSA HOSE ASSY, 1/2, SWV STR, MALE STR, 30.75
H090 1.00 EA F471TC0637080808-14.75-X-1 0 HOSE ASSY, 1/2, SWV STR, 45°, 14.75
H091 1.00 EA F471TC0639040404-20.75-X-1 0 HOSE ASSY, 1/4, SWV STR, 90° SHT, 20.75
H096 1.00 EA F721TC060316-16-16-451-X-4 0 HOSE ASSY, 1, SWV STR, MALE STR, 451
H097 1.00 EA F721TC060316-16-16-451-X-4 0 HOSE ASSY, 1, SWV STR, MALE STR, 451
H098 1.00 EA F471TC0641080808-25.75-X-2 0 HOSE ASSY, 1/2, SWV STR, 90°LONG, 25.75
H099 1.00 EA F471TC0606080808-44.75-X-4 0 HOSE ASSY, 1/2, SWV STR, SWV STR, 44.75
H100 1.00 EA F471TC0641080808-27.25-X-2 0 HOSE ASSY, 1/2, SWV STR, 90°LONG, 27.25
H101 1.00 EA F471TC0606080808-45.75-X-4 VSA HOSE ASSY, 1/2, SWV STR, SWV STR, 45.75
H102 1.00 EA F471TC0603080808-15-X-12.2 VSA HOSE ASSY, 1/2, SWV STR, MALE STR, 15
H103 1.00 EA F471TC0603080808-16.75-X-1 VSA HOSE ASSY, 1/2, SWV STR, MALE STR, 16.75
H104 1.00 EA F471TC0603080808-13-X-10.2 VSA HOSE ASSY, 1/2, SWV STR, MALE STR, 13
H105 1.00 EA F471TC0603080808-18-X-15.2 VSA HOSE ASSY, 1/2, SWV STR, MALE STR, 18
H106 1.00 EA F471TC0603080808-13-X-10.2 VSA HOSE ASSY, 1/2, SWV STR, MALE STR, 13
H107 1.00 EA F471TC0603080808-18.50-X-1 VSA HOSE ASSY, 1/2, SWV STR, MALE STR, 18.50
H108 1.00 EA F471TC0603080808-15.25-X-1 VSA HOSE ASSY, 1/2, SWV STR, MALE STR, 15.25
H109 1.00 EA F471TC0603080808-13.75-X-1 VSA HOSE ASSY, 1/2, SWV STR, MALE STR, 13.75
H110 1.00 EA F471TC0603080808-14.50-X-1 VSA HOSE ASSY, 1/2, SWV STR, MALE STR, 14.50
H111 1.00 EA F471TC0603080808-16.75-X-1 VSA HOSE ASSY, 1/2, SWV STR, MALE STR, 16.75
H112 1.00 EA F471TC0603080808-16-X-13.2 VSA HOSE ASSY, 1/2, SWV STR, MALE STR, 16
H113 1.00 EA F471TC0603080808-14.75-X-1 VSA HOSE ASSY, 1/2, SWV STR, MALE STR, 14.75
H114 1.00 EA F471TC0603080808-44-X-41.2 VSA HOSE ASSY, 1/2, SWV STR, MALE STR, 44
H115 1.00 EA F471TC0603080808-47.75-X-4 VSA HOSE ASSY, 1/2, SWV STR, MALE STR, 47.75
H116 1.00 EA F471TC0603080808-53.75-X-5 VSA HOSE ASSY, 1/2, SWV STR, MALE STR, 53.75
H117 1.00 EA F471TC0603080808-58.50-X-5 VSA HOSE ASSY, 1/2, SWV STR, MALE STR, 58.50
T01 1.00 EA DT50311 TUBE,#8 F JIC,209IN,LG
T02 1.00 EA DT50312 TUBE,#8 F JIC,205IN,LG
T03 1.00 EA DT50311 TUBE,#8 F JIC,209IN,LG
T04 1.00 EA DT50312 TUBE,#8 F JIC,205IN,LG
T05 1.00 EA DT50314 TUBE,#8 F JIC,179IN,LG
T06 1.00 EA DT50315 TUBE,#8 F JIC,175IN,LG
T07 1.00 EA DT50316 TUBE,#8 F JIC,167IN,LG
Printed: #Name? Page 1 of 2
 Engineering
Bill of Material

Part: AY51031
Description: HOSE ASSY, SAFETY PIN, PC4000
Eng ID: 0
Drawing ID: 183100008 Rev No: A
Item Qty Units Part ID Eng ID Description

H118 1.00 EA F471TC0603080808-15.50-X-1 VSA HOSE ASSY, 1/2, SWV STR, MALE STR, 15.75
H119 1.00 EA F471TC0603080808-12.75-X-1 VSA HOSE ASSY, 1/2, SWV STR, MALE STR, 12.75
H120 1.00 EA F471TC0639080808-20.75-X-1 0 HOSE ASSY, 1/2, SWV STR, 90° SHT, 20.75
H121 1.00 EA F471TC0639080808-63-X-60.2 0 HOSE ASSY, 1/2, SWV STR, 90° SHT, 63
H122 1.00 EA F471TC0639080808-43.75-X-4 VSA HOSE ASSY, 1/2, SWV STR, 90° SHT, 43.75
H123 1.00 EA F471TC0639080808-60.75-X-5 VSA HOSE ASSY, 1/2, SWV STR, 90° SHT, 60.75
T12 1.00 EA DT50321 TUBE,#8 F JIC,210IN,LG
T13 1.00 EA DT50322 TUBE,#8 F JIC,206IN,LG
T14 1.00 EA DT50321 TUBE,#8 F JIC,210IN,LG
T15 1.00 EA DT50322 TUBE,#8 F JIC,206IN,LG
T16 1.00 EA DT50321 TUBE,#8 F JIC,210IN,LG
T17 1.00 EA DT50322 TUBE,#8 F JIC,206IN,LG
T18 1.00 EA DT50321 TUBE,#8 F JIC,210IN,LG
T19 1.00 EA DT50322 TUBE,#8 F JIC,206IN,LG

Printed: #Name? Page 1 of 1

 Engineering
Bill of Material
Part: AY51595
Description: ASSY, CHAIN, SKATE DRIVE, PC4000
Eng ID: 0
Drawing ID: AY51595 Rev No: A
Item Qty Units Part ID Description

01 1.00 EA M10743 CHAIN, SKATE DRIVE, 60-2H, 46 1/2 LG

02 1.00 EA M10742 CHAIN, SKATE DRIVE, 60-2 H, 3 LG
03 0.00 EA M11208 CHAIN CONNECTOR, DAIDO, #60-2

Printed: 4/23/2015
 A B C D IF IN DOUBT......PLEASE ASK! G H I J K

7 7

6 6

5 5

4 4

3
3

2 2

INIT. YY/MM/DD THIRD ANGLE PROJECTION

WELDING PROCEDURE AS PER CANRIG SPECIFICATION - ENG 704, UNLESS NOTED OTHERWISE MODELED MRB 14/06/16
THIS PRINT AND DESIGN AND DETAIL REMOVE SHARP CORNERS AND BURRS TOLERANCE - UNLESS OTHERWISE SPECIFIED DRAWN MRB 14/06/17
SHOWN THEREON ARE THE PROPERTY CASTING ± 1/16 FABRICATING IMPERIAL FABRICATING [METRIC] CHECKED GRY 14/07/18
1 CONCENTRICITY .005 TIR 0 TO 24" ± 1/16" 0 TO 610 mm ± 1 mm
AND INVENTION OF CANRIG DRILLING APPRV'D GDF 14/07/21
STRAIGHTNESS ± .005 IN 5 INCHES 24" to 60" ± 1/8" 610 TO 1525 ± 3 mm DO NOT SCALE DRAWING 1
TECHNOLOGY LTD.. THIS PRINT IS ± 3/16" 1525 TO 3048 ± 5 mm MATERIAL
SQUARENESS ± .010 IN 5 INCHES 60" to 120"
FURNISHED WITH THE UNDERSTANDING 120" to 280" ± 1/4" 3048 TO 7112 ± 7 mm
PARALLELISM ± .010 IN 5 INCHES
THAT IT IS NOT TO BE REPRODUCED FLATNESS ± .010 or as Shown 280" & OVER ± 1/2" 7112 & OVER ± 13 mm ASSY, CHAIN, SKATE DRIVE, PC4000
WITHOUT PERMISSION AND RETURNED TRUE POSITION .005 MACHINING IMPERIAL MACHINING METRIC
UPON DEMAND. ALL RIGHTS OF DESIGN DECIMAL .x ± .030" DECIMAL x. ± .8 mm
A 14/06/17 MRB INTIAL RELEASE 2421 GRY GDF MACHINED SURFACES 125 .xx ± .015" x.x ± .40 mm
AND INVENTION ARE RESERVED BY EST. WEIGHT SCALE 1:1
CANRIG DRILLING TECHNOLOGY LTD.. .xxx ± .005" x.xx ± .13 mm SHEET 1 OF 1 AY51595 REV A
REV DATE BY REVISION DESCRIPTION ECN CHKD APVD MIN. RADIUS UNLESS SHOWN = 0.03 MAX. ANGULAR MACHINING ± 1° FABRICATION ± 2° 1.0 lbs SHEET SIZE D

A B C D IF IN DOUBT......PLEASE ASK! G H I J K
 SUBSECTION 7B: RAMP & LIFT ARM

Assembly Description Drawing Rev

11120001 ASSY,4FT(12.M)RAMP,3F-FT SUB,PC400087100026 &

111400022 ASSY, 30FT (9.2M) LIFT ARM, PC4000 187100027 %
121100106 KIT, RAMP TO CATWALK CONNECT, PC4000 121100106 A
121200001 ASSY DETAIL, WINCH ASSY 121200001 C
121200022 ASSY, RAMP VLV BLK 121200022 C
121200027 ASSY, RAMP WINCH, PC4000 121200027 B
121200028 ASSY, RAMP ROLLER, PC4000 121200028 A
121200029 ASSY, SHEAVE, RAMP, PC4000 121200029 C
121300051 KIT, LIFT ARM TO CARRIER CONNECT, PC4000 121300051 A
121500002 ASSY, SPEAR, PC4000 121500002M A
AY50425 ASSY, CBAL VLV BLOCK, RAMP, PC4000 AY50425 A
AY51028 HOSE ASSY, RAMP, PC4000 183100009 C
AY51033 HOSE ASSY,GREASE LINE,RAMP SHEAVE,PC4000 183100009 C

Thursday, 0D\, 2015 Serial Number 40007

 Engineering
Bill of Material

Part: 111200031
Description: ASSY,42FT(12.8M)RAMP,37F-42FT
SUB,PC4000
Eng ID: 1
Drawing ID: 187100026 Rev No: C
Item Qty Units Part ID Eng ID Description

01 1.00 EA 131100740 WELDMENT, RAMP, 42FT, PC4000 SERIES

02 2.00 EA 121100106 0 KIT, RAMP TO CATWALK CONNECT, PC4000
03 1.00 EA 121200027 1 ASSY, RAMP WINCH, PC4000
04 1.00 EA 121200029 1 ASSY, SHEAVE, RAMP, PC4000
05 1.00 EA 121200028 0 ASSY, RAMP ROLLER, PC4000
06 1.00 EA 121200022 4 ASSY, RAMP VLV BLK
07 1.00 EA H15-070959-16-16 TEE, BULKHEAD BRANCH, MALE 1 JIC
08 1.00 EA H15-070123-16-08 REDUCER, FEMALE 1JIC, MALE 1/2 JIC
09 1.00 EA H15-070432-08-08 TEE, FEM SWV RUN 1/2, MALE 1/2 JIC
10 3.00 EA M11099 HOSE CLAMP BODY, 20mm, GRP 3 TWIN
11 3.00 EA H10478 TOP COVER, HOSE CLAMP, TWIN, 3 SER
12 1.00 EA AY50425 0 ASSY, CBAL VLV BLOCK, RAMP, PC4000
13 2.00 EA AY50211 VSA ASSY, CA, WINCH, 7/8IN x 151FT
14 2.00 EA LW-0375-HS-HC LOCKWASHER, 3/8 HELICAL SPR, HIGH COLLAR
15 2.00 EA SH-0375NC-0300 CAPSCR, HEX SOC HD, 3/8-16UNC x 3.00
16 3.00 EA HH-0312NC-0225-GR8 CAPSCR, HEX HD, 5/16-18UNC x 2.25, GR8
17 3.00 EA LW-0312-HS LOCKWASHER, 5/16 HELICAL SPRING
18 2.00 EA H15-070603-04-02 ADPT, BLKHD, MALE 1/4 JIC, FEM 1/8 NPT
19 2.00 EA M10533 FTG, GREASE, 1/8 NPT, PTF-SS
REF 0.00 EA 183100009 SCHEM, PC4000 RAMP PLUMBING

Printed: #Name? Page 1 of 1

 29', 31', 40', 42'

C
PART NUMBER DESCRIPTION C 12/09/07 OOT ADDED 111200048 IN THE TABLE 1587 GWL JCR
111200018 ASSY, 29' (8.8m) RAMP, 22' TO 27' SUB, PC4000 ADDED H15-070603-04-02 AND
111200042 ASSY, 31' (9.5m) RAMP, 28' TO 29' SUB, PC4000 B 10/02/16 M10533 1375
111200021 ASSY, 40' (12.2m) RAMP, 30' TO 36' SUB, PC4000 A 09/10/26 JCR RFM
111200031 ASSY, 42' (12.8m) RAMP, 37' TO 42' SUB, PC4000
111200048 ASSY, 46' (14.0m) RAMP, 43' TO 46' SUB, PC4000 REV DATE BY REVISION DESCRIPTION ECN CHKD APVD
TITLE:
© 2009 CANRIG DRILLING TECHNOLOGY CANADA LIMITED
ALL RIGHTS RESERVED
THE DRAWINGS, INFORMATION AND SUBJECT MATTER HEREOF
ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE PROPERTY OF
PC4000 RAMP ASSY
CANRIG DRILLING TECHNOLOGY CANADA LTD, AND ARE NOT
TO BE COPIED, REPRODUCED, OR USED IN ANY MANNER FOR 7475 51 Street SE DRAWN BY: DATE: DRAWING NO: SHEET: REV:
ANY PURPOSE WHATSOEVER WITHOUT WRITTEN CONSENT Calgary, Alberta, Canada, T2C 4L6
OR DIRECTION. Website: www.canrig.com
Bus. (403) 237-6400 Fax. (403) 233-2667
JCR 8/18/2009 187100026 1 OF 4 C
 A

2
1

DETAIL A

13

4
3

DRILL HOLE IN GUARD

MOUNTING PAD USING
HOLE IN CHANNEL
AS GUIDE
2PL

DETAIL B
5

TITLE:
© 2009 CANRIG DRILLING TECHNOLOGY CANADA LIMITED
ALL RIGHTS RESERVED
THE DRAWINGS, INFORMATION AND SUBJECT MATTER HEREOF PC4000 RAMP ASSY
ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE PROPERTY OF
CANRIG DRILLING TECHNOLOGY CANADA LTD, AND ARE NOT
TO BE COPIED, REPRODUCED, OR USED IN ANY MANNER FOR 7475 51 Street SE DRAWN BY: DATE: DRAWING NO: SHEET: REV:
ANY PURPOSE WHATSOEVER WITHOUT WRITTEN CONSENT Calgary, Alberta, Canada, T2C 4L6
OR DIRECTION. Website: www.canrig.com
Bus. (403) 237-6400 Fax. (403) 233-2667
JCR 8/18/2009 187100026 2 OF 4 C
 13

D
5

13 4 D

DETAIL C

SECTION D-D

E
F

TITLE:
© 2009 CANRIG DRILLING TECHNOLOGY CANADA LIMITED
ALL RIGHTS RESERVED
THE DRAWINGS, INFORMATION AND SUBJECT MATTER HEREOF PC4000 RAMP ASSY
ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE PROPERTY OF
CANRIG DRILLING TECHNOLOGY CANADA LTD, AND ARE NOT
TO BE COPIED, REPRODUCED, OR USED IN ANY MANNER FOR 7475 51 Street SE DRAWN BY: DATE: DRAWING NO: SHEET: REV:
ANY PURPOSE WHATSOEVER WITHOUT WRITTEN CONSENT Calgary, Alberta, Canada, T2C 4L6
OR DIRECTION. Website: www.canrig.com
Bus. (403) 237-6400 Fax. (403) 233-2667
JCR 8/18/2009 187100026 3 OF 4 C
 15 14 6

NOTE: GRIND BOLT ENDS

FLUSH ON FAR SIDE

16 17 11 10 10

12

7 8 9
DETAIL E

18 19

DETAIL F

TITLE:
© 2009 CANRIG DRILLING TECHNOLOGY CANADA LIMITED
ALL RIGHTS RESERVED
THE DRAWINGS, INFORMATION AND SUBJECT MATTER HEREOF PC4000 RAMP ASSY
ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE PROPERTY OF
CANRIG DRILLING TECHNOLOGY CANADA LTD, AND ARE NOT
TO BE COPIED, REPRODUCED, OR USED IN ANY MANNER FOR 7475 51 Street SE DRAWN BY: DATE: DRAWING NO: SHEET: REV:
ANY PURPOSE WHATSOEVER WITHOUT WRITTEN CONSENT Calgary, Alberta, Canada, T2C 4L6
OR DIRECTION. Website: www.canrig.com
Bus. (403) 237-6400 Fax. (403) 233-2667
JCR 8/18/2009 187100026 4 OF 4 C
 Engineering
Bill of Material

Part: 111400022
Description: ASSY, 30FT (9.2M) LIFT ARM, PC4000
Eng ID: 0
Drawing ID: 187100027 Rev No: B
Item Qty Units Part ID Eng ID Description

01 1.00 EA AY50115 VSA ASSY, GORTRAC, PC4000

01A 0.00 EA AY50115-1 VSA KIT,GLIDE BLOCK REPLACEMENT,PC4000
02 1.00 EA 121500002 0 ASSY, SPEAR, PC4000
03 2.00 EA 121300051 0 KIT, LIFT ARM TO CARRIER CONNECT, PC4000
04 1.00 EA 131100742 WELDMENT, PC4000 30 FT LIFT ARM
05 2.00 EA 161100228 MACHINED, LIFT ARM FLANGED WHEEL
06 2.00 EA 161100219 MACHINED, LIFTING ARM AXLE
07 2.00 EA 161100053 LIFT ARM POCKET ROLLER
08 2.00 EA 161600001 MACHINED, LIFT ARM ROLLER BUSHING
09 21.00 EA H10683 CLAMP HALVES, TUBE, 1.5IN, NO HARDWARE
10 21.00 EA H10832 COVER PLATE,TUBE CLAMP,GROUP 5
11 2.00 EA M10492 RETAINING RING, SPIRAL, EXT, 2.50 IN
12 2.00 EA M10533 FTG, GREASE, 1/8 NPT, PTF-SS
13 2.00 EA M10490 RETNG RING, SPIRAL, EXT, 2.00 IN
14 4.00 EA SS-0500NC-0050 SETSCREW 1/2-13UNC x 0.50 CUP POINT
15 4.00 EA HH-0375NC-0075-GR8 CAPSCR, HEX HD, 3/8-16UNC x 0.75, GR8
16 42.00 EA FW-0250-A WASHER, F, 1/4, PLAIN, TYPE A
17 4.00 EA LW-0375-HS LOCKWASHER, 3/8 HELICAL SPRING
18 4.00 EA HH-0375NC-0125-GR8 CAPSCR, HEX HD, 3/8-16UNC x 1.25, GR8
19 42.00 EA HH-0250NC-0375-GR8 CAPSCR, HEX HD, 1/4-20UNC x 3.75, GR8
20 42.00 EA LN-0250NC-NL-GR8 LOCKNUT, 1/4-20UNC, NYLOCK, GR8
21 12.00 EA FW-0375-A WASHER, F, 3/8, PLAIN, TYPE A
22 4.00 EA LN-0375NC-NL-GR8 LOCKNUT, 3/8-16UNC, NYLOCK, GR8
2.00 EA F721TC0603161616-416.5-X-4 0 HOSE ASSY,1,SWV STR,MALE STR,416.5

Printed: #Name? Page 1 of 1

 A B C D IF IN DOUBT......PLEASE ASK! G H I J K
PART NUMBER DESCRIPTION C TO C
111400011 ASSY, 18 FT (5.5 m) LIFT ARM, PC4000 18 FT
111400013 ASSY, 21 FT (6.4 m) LIFT ARM, PC4000 21 FT
B 111400014 ASSY, 27 FT (8.2 m) LIFT ARM, PC4000 27 FT
7 7
111400022 ASSY, 30 FT (9.2 m) LIFT ARM, PC4000 30 FT
20 16 16 24 111400025 ASSY, 33 FT (10.1 m) LIFT ARM, PC4000 33 FT
111400024 ASSY, 35 FT (10.7 m) LIFT ARM, PC4000 35 FT
9

6 6

4
10

3
DETAIL A
SCALE 1 : 8
5 5

C-C
4 4
A
23 21 22

1 2

3 3
11

12 13
5 8
14 7
6

DETAIL C
SCALE 1 : 8
2
2

15 17 21

INIT. YY/MM/DD THIRD ANGLE PROJECTION

WELDING PROCEDURE AS PER CANRIG SPECIFICATION - ENG 704, UNLESS NOTED OTHERWISE MODELED
DETAIL B THIS PRINT AND DESIGN AND DETAIL REMOVE SHARP CORNERS AND BURRS TOLERANCE - UNLESS OTHERWISE SPECIFIED DRAWN JX YY/MM/DD
SHOWN THEREON ARE THE PROPERTY CASTING ± 1/16 FABRICATING IMPERIAL FABRICATING [METRIC] CHECKED OOT YY/MM/DD
SCALE 1 : 2 CONCENTRICITY .005 TIR 0 TO 24" ± 1/16" 0 TO 610 mm ± 1 mm 1
1 AND INVENTION OF CANRIG DRILLING APPRV'D JCR YY/MM/DD
STRAIGHTNESS ± .005 IN 5 INCHES 24" to 60" ± 1/8" 610 TO 1525 ± 3 mm DO NOT SCALE DRAWING
TECHNOLOGY LTD.. THIS PRINT IS ± 3/16" 1525 TO 3048 ± 5 mm MATERIAL
SQUARENESS ± .010 IN 5 INCHES 60" to 120"
FURNISHED WITH THE UNDERSTANDING 120" to 280" ± 1/4" 3048 TO 7112 ± 7 mm
PARALLELISM ± .010 IN 5 INCHES
THAT IT IS NOT TO BE REPRODUCED FLATNESS ± .010 or as Shown 280" & OVER ± 1/2" 7112 & OVER ± 13 mm ASSY, 21 FT (6.4m) LIFT ARM, PC4000
GRAPHICAL UPDATED PRINT DUE TO REVSION ON THE WITHOUT PERMISSION AND RETURNED MACHINING IMPERIAL MACHINING METRIC
B 14/07/21 MRB LOWER LEVEL ASSEMBLY OF SWING ARM 1990 GRY GDF TRUE POSITION .005
UPON DEMAND. ALL RIGHTS OF DESIGN DECIMAL .x ± .030" DECIMAL x. ± .8 mm
A 09/10/08 JCR RFM MACHINED SURFACES 125 .xx ± .015" x.x ± .40 mm
AND INVENTION ARE RESERVED BY EST. WEIGHT SCALE 1:16
CANRIG DRILLING TECHNOLOGY LTD.. .xxx ± .005" x.xx ± .13 mm SHEET 1 OF 1 187100027 REV B
REV DATE BY REVISION DESCRIPTION ECN CHKD APVD MIN. RADIUS UNLESS SHOWN = 0.03 MAX. ANGULAR MACHINING ± 1° FABRICATION ± 2° 2053.35 lbs SHEET SIZE D

A B C D IF IN DOUBT......PLEASE ASK! E H I J K
 Engineering
Bill of Material
Part: 121100106
Description: KIT, RAMP TO CATWALK CONNECT, PC4000
Eng ID: 0
Drawing ID: 121100106 Rev No: A
Item Qty Units Part ID Description

01 1.00 EA 161100231 MACHINED, RAMP TO CATWALK PIN

02 1.00 EA 141100804 PLATE, PIN RETAINER
03 1.00 EA HH-0375NC-0125-GR8 CAPSCR, HEX HD, 3/8-16UNC x 1.25, GR8
04 1.00 EA LW-0375-HS LOCKWASHER, 3/8 HELICAL SPRING
05 1.00 EA FW-0375-A WASHER, F, 3/8, PLAIN, TYPE A
06 1.00 EA M10533 FTG, GREASE, 1/8 NPT, PTF-SS

Printed: 4/23/2015
 6

5 4 3

CANRIG DRILLING TECHNOLOGY CANADA LIMITED © 2006

THE DRAWINGS, INFORMATION AND SUBJECT MATTER

7475 51 Street SE
HEREOF ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE KIT, RAMP TO CATWALK CONNECT, PC4000
Calgary, Alberta, Canada, T2C 4L6 PROPERTY OF CANRIG DRILLING TECHNOLOGY CANADA
Website: www.canrig.com LTD, AND ARE NOT TO BE COPIED, REPRODUCED OR USED
Bus. (403) 237-6400
Fax. (403) 233-2667
IN ANY MANNER FOR ANY PURPOSE WHATSOEVER SHEET 1 OF 1
WITHOUT WRITTEN CONSENT OR DIRECTION.
REV. DESCRIPTION DATE
121100106
DATE CREATED: PART NO: REV:
A RFM 6/3/2008 February 6, 2008 5:39:43 PM A
 Engineering
Bill of Material
Part: 121200001
Description: ASSY DETAIL, WINCH ASSY
Eng ID: 3
Drawing ID: 121200001 Rev No: C
Item Qty Units Part ID Description

01 1.00 EA M10529 WINCH, CARRIER

02 1.00 EA N10845 ENCODER, HVY-DTY SEALED HOLLOW SHAFT
03 6.00 EA HH-0375NC-0075-GR8 CAPSCR, HEX HD, 3/8-16UNC x 0.75, GR8
04 6.00 EA FW-0375-A WASHER, F, 3/8, PLAIN, TYPE A
05 6.00 EA LW-0375-HS LOCKWASHER, 3/8 HELICAL SPRING
06 1.00 EA H10315 MOTOR, HYD, PISTON, 110cc/REV
07 4.00 EA FW-0750-A WASHER, F, 3/4, PLAIN, TYPE A
08 4.00 EA LW-0750-HS LOCKWASHER, 3/4 HELICAL SPRING
09 4.00 EA HH-0750NC-0350-GR8 CAPSCR, HEX HD, 3/4-10UNC x 3.50, GR8
R01 2.00 EA C10139 OIL, MOBIL GEAR

Printed: 4/23/2015
 I

1
6

3 5

C
7 8 9

5 4 3

CHANGED ITEM 9, HH-0750NC-0250-GR8

C 14/05/28 SR 2393 AD MA
TO HH-0750NC-0350-GR8
CHANGED QUANTITY FOR ITEM #4,
B 12/10/17 OOT 1619 GWL JCR
FROM 3 TO 6
A 08/05/06 UPDATED DRAWING FORMAT
REL-01 07/09/20 FIRST MANUAL/ASSEMBLY ISSUE
REV DATE BY REVISION DESCRIPTION ECN CHKD APVD
TITLE:
© 2010 CANRIG DRILLING TECHNOLOGY CANADA LIMITED
ALL RIGHTS RESERVED
THE DRAWINGS, INFORMATION AND SUBJECT MATTER HEREOF ASSEMBLY DETAIL, WINCH ASSEMBLY
ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE PROPERTY OF
CANRIG DRILLING TECHNOLOGY CANADA LTD, AND ARE NOT
TO BE COPIED, REPRODUCED, OR USED IN ANY MANNER FOR DRAWN BY: DATE: DRAWING NO: SHEET: REV:
ANY PURPOSE WHATSOEVER WITHOUT WRITTEN CONSENT
OR DIRECTION. DR 8/4/2005 121200001 1 OF 1 C
 Engineering
Bill of Material
Part: 121200022
Description: ASSY, RAMP VLV BLK
Eng ID: 4
Drawing ID: 121200022 Rev No: C
Item Qty Units Part ID Description

2.00 EA SH-0375NC-0300 CAPSCR, HEX SOC HD, 3/8-16UNC x 3.00

2.00 EA LW-0375-HS-HC LOCKWASHER, 3/8 HELICAL SPR, HIGH COLLAR
01 1.00 EA 161100252 MANIFOLD, CARRIER WINCH CONTROL
02 1.00 EA H10329 VLV, CONTROL, WINCH BRK RELEASE
03 3.00 EA H10795 CPLG, HYD, TEST POINT, 7/16-20UNF
04 4.00 EA H15-090109B-04 PLUG, SOC HEX, 1/4 ORB
05 5.00 EA H15-070120-08-08 ADPT, MALE 1/2 JIC, MALE 1/2 ORB
06 2.00 EA H10326 VLV, HYD, PRESS REDUCING, CARTRIDGE
07 1.00 EA H10318 VLV, DIVERTER, 3-WAY, 2 POS
08 4.00 EA SH-10-24-0175 CAPSCR, HEX SOC HD, # 10-24UNC x 1.75
09 1.00 EA LW-10-HS LOCKWASHER, #10, HELICAL SPRING
10 1.00 EA 158100033 PLUG, 1/8 NPT, .040 ORIFICE
11 1.00 EA H10110 PLUG, CAVITY, T-10A, ALL PORTS OPEN
12 1.00 EA H15-090109A-08 PLUG, HEX HD, 1/2 ORB

Printed: 4/23/2015
 9 8

6
4
5 6
4
10

5
4

11

12

5
1 4

C ADDED H10110 AND H15-09109A-08. 12/09/12

B REPLACED SH-10-24-0125 WITH SH-10-25-0175 11/11/07

A RFM 5/06/08
REV. DESCRIPTION DATE

© 2010 CANRIG DRILLING TECHNOLOGY CANADA LIMITED TITLE:

ALL RIGHTS RESERVED
THE DRAWINGS, INFORMATION AND SUBJECT MATTER HEREOF ASSEMBLY, RAMP VALVE BLOCK
ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE PROPERTY OF
CANRIG DRILLING TECHNOLOGY CANADA LTD, AND ARE NOT
TO BE COPIED, REPRODUCED, OR USED IN ANY MANNER FOR DRAWN BY: DATE: DRAWING NO: SHEET: REV:
ANY PURPOSE WHATSOEVER WITHOUT WRITTEN CONSENT
OR DIRECTION. 8/31/2007 121200022 1 OF 1 C
 Engineering
Bill of Material

Part: 121200027
Description: ASSY, RAMP WINCH, PC4000
Eng ID: 1
Drawing ID: 121200027 Rev No: B
Item Qty Units Part ID Eng ID Description

01 1.00 EA 121200001 3 ASSY DETAIL, WINCH ASSY

02 1.00 EA H15-070123A-12-8 REDUCER, JIC 3/4 FEMALE, 1/2 MALE
03 1.00 EA H15-070433-12 TEE, FEM, SWV BRANCH, MALE 3/4 JIC
04 1.00 EA H11868 VLV, CHECK, MALE 3/4 ORB, MALE 3/4 JIC
05 1.00 EA H15-070120-08-04 ADPT, MALE 1/2 JIC, MALE 1/4 ORB
06 1.00 EA H15-070120-08-12 ADPT, MALE 1/2 JIC, MALE 3/4 ORB
07 2.00 EA H15-3223-20-16 HOSE FTG, STR, 1-1/4, 1 CODE 62
08 2.00 EA AY50161 FLANGE KIT, 1-1/4IN, CODE 62
09 4.00 EA HH-1250NC-0450-GR8 CAPSCR, HEX HD, 1 1/4-7UNC x 4.50, GR8
10 8.00 EA FW-1250-A WASHER, F, 1.25, PLAIN, TYPE A, 2.50 OD
11 4.00 EA LN-1250NC-NL-GR8 LOCKNUT, 1 1/4-7UNC, GR8, NYLOCK
12 1.00 EA 131100122 WELDMENT, WINCH CABLE GUARD
13 4.00 EA HH-0312NC-0075-GR8 CAPSCR, HEX HD, 5/16-18UNC x 0.75, GR8
14 4.00 EA LW-0312-HS LOCKWASHER, 5/16 HELICAL SPRING
15 4.00 EA FW-0312-A-N WASHER, F, 5/16, PLAIN, TYPE A, NARROW
16 2.00 EA HH-0750NC-0200-GR8 CAPSCR, HEX HD, 3/4-10UNC x 2.00, GR8
17 4.00 EA FW-0750-A WASHER, F, 3/4, PLAIN, TYPE A
18 2.00 EA LN-0750NC-NL-GR8 LOCKNUT, 3/4-10UNC, NYLOCK, GR8

Printed: #Name? Page 1 of 1

 12

16 17 17 18

13 14 15
4

6 7 8

11 10 10 9

B 2012/11/22 SH REPLACED ITEM#4 FOR H10868 1953 TBG JCR

A 2008/03/6

REV DATE BY REVISION DESCRIPTION ECN CHKD APVD

TITLE:
© 2010 CANRIG DRILLING TECHNOLOGY CANADA LIMITED
ALL RIGHTS RESERVED
THE DRAWINGS, INFORMATION AND SUBJECT MATTER HEREOF ASSY, RAMP WINCH, PC4000
ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE PROPERTY OF
CANRIG DRILLING TECHNOLOGY CANADA LTD, AND ARE NOT
TO BE COPIED, REPRODUCED, OR USED IN ANY MANNER FOR DRAWN BY: DATE: DRAWING NO: SHEET: REV:
ANY PURPOSE WHATSOEVER WITHOUT WRITTEN CONSENT
OR DIRECTION. 12/4/2007 121200027 1 OF 1 B
 Engineering
Bill of Material
Part: 121200028
Description: ASSY, RAMP ROLLER, PC4000
Eng ID: 0
Drawing ID: 121200028 Rev No: A
Item Qty Units Part ID Description

01 1.00 EA 161100199 MACHINED, RAMP FRONT ROLLER

02 2.00 EA M10502 BRG, MOUNTED, 4 BOLT FLANGED, 3 7/16
03 8.00 EA HH-0750NC-0350-GR8 CAPSCR, HEX HD, 3/4-10UNC x 3.50, GR8
04 16.00 EA FW-0750-A WASHER, F, 3/4, PLAIN, TYPE A
05 8.00 EA LN-0750NC-NL-GR8 LOCKNUT, 3/4-10UNC, NYLOCK, GR8
06 2.00 EA M10533 FTG, GREASE, 1/8 NPT, PTF-SS
07 2.00 EA M10607 SPLIT COLLAR, 4 1/2 B, 5 3/4 OD, 7/8 W
08 4.00 EA SH-0375NF-0100 CAPSCR, HEX SOC HD, 3/8-24UNF x 1.00
09 4.00 EA LW-0375-HS-HC LOCKWASHER, 3/8 HELICAL SPR, HIGH COLLAR

Printed: 4/23/2015
 1

9 8

5 4 4 3

THE DRAWINGS, INFORMATION AND SUBJECT MATTER

7475 51 Street SE
HEREOF ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE ASSY, RAMP ROLLER, PC4000
Calgary, Alberta, Canada, T2C 4L6 PROPERTY OF CANRIG DRILLING TECHNOLOGY CANADA
Website: www.canrig.com
Bus. (403) 237-6400
Fax. (403) 233-2667
IN ANY MANNER FOR ANY PURPOSE WHATSOEVER SHEET 1 OF 1
WITHOUT WRITTEN CONSENT OR DIRECTION.
REV. DESCRIPTION DATE
121200028
DATE CREATED: PART NO: REV:
A RFM 6/3/2008 December 3, 2007 5:24:25 PM A
 Engineering
Bill of Material
Part: 121200029
Description: ASSY, SHEAVE, RAMP, PC4000
Eng ID: 1
Drawing ID: 121200029 Rev No: C
Item Qty Units Part ID Description

01 1.00 EA 161100204 MACHINED, RAMP SHEAVE SHAFT

02 3.00 EA 161100060 RAMP SHEAVE SPACER A
03 1.00 EA 141100922 PLATE, SHEAVE BRG PRE-LOAD B
04 1.00 EA 141100682 PLATE, SHEAVE PIN LOCK
05 2.00 EA M10595 SHEAVE, 610mm OD, 108mm SHAFT
06 7.00 EA HH-0500NC-0150-GR8 CAPSCR, HEX HD, 1/2-13UNC x 1.50, GR8
07 7.00 EA LW-0500-HS LOCKWASHER, 1/2, HELICAL SPRING
08 7.00 EA FW-0500-A-N WASHER, F, 1/2, TYPE A, NARROW
09 2.00 EA H10518 ADPT, 1/8 PIPE THREAD, 1/4 JIC MALE LONG
10 2.00 EA M10699 CUP, TPRD ROL BRG, 6.5 OD, 2.5 W
11 4.00 EA M11287 CONE, TPRD ROL BRG, 4.250 B, 1.4375 W, E
12 4.00 EA S10081 SHEAVE SEAL, 0.437 x 0.062 x 3.375

Printed: 4/23/2015
 C

6 7 8

1
C
5
11

12

2
10

8 7 6

REV. DESCRIPTION DATE

ITEM 6, HH-0500NC-0150-GR8; ITEM 7, LW-0500-HS; ITEM 8, FW-0500-A-N: QTY
C OF 4 CHANGED TO 7. ITEM 5, M10514 CHANGED TO M10595, SEE ECN#2386, 6/02/2014
FOR FURTHER DETAIL.
B REPLACED M10533 WITH H10518 TO ALLOW FOR REMOTE GREASE LINES, 2/16/2010
SEE ECN# CN1375 FOR FURTHER DETAIL
A RFM 6/3/2008
TITLE:
© 2009 CANRIG DRILLING TECHNOLOGY CANADA LIMITED
ALL RIGHTS RESERVED
THE DRAWINGS, INFORMATION AND SUBJECT MATTER HEREOF ASSY, SHEAVE, RAMP, PC4000
ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE PROPERTY OF
CANRIG DRILLING TECHNOLOGY CANADA LTD, AND ARE NOT
TO BE COPIED, REPRODUCED, OR USED IN ANY MANNER FOR 7475 51 Street SE DRAWN BY: DATE: DRAWING NO: SHEET: REV:
ANY PURPOSE WHATSOEVER WITHOUT WRITTEN CONSENT Calgary, Alberta, Canada, T2C 4L6
OR DIRECTION. Website: www.canrig.com GDF 12/3/2007 121200029 1 OF 1 C
Bus. (403) 237-6400 Fax. (403) 233-2667
 Engineering
Bill of Material
Part: 121300051
Description: KIT, LIFT ARM TO CARRIER CONNECT, PC4000
Eng ID: 0
Drawing ID: 121300051 Rev No: A
Item Qty Units Part ID Description

01 1.00 EA 161100230 MACHINED, LIFT ARM/CARRIER PIN

02 1.00 EA 141100804 PLATE, PIN RETAINER
03 1.00 EA HH-0375NC-0125-GR8 CAPSCR, HEX HD, 3/8-16UNC x 1.25, GR8
04 1.00 EA LW-0375-HS LOCKWASHER, 3/8 HELICAL SPRING
05 1.00 EA FW-0375-A WASHER, F, 3/8, PLAIN, TYPE A
06 1.00 EA M10533 FTG, GREASE, 1/8 NPT, PTF-SS

Printed: 4/23/2015
 1

2
3 4 5

CANRIG DRILLING TECHNOLOGY CANADA LIMITED © 2006

THE DRAWINGS, INFORMATION AND SUBJECT MATTER

7475 51 Street SE
HEREOF ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE KIT, LIFT ARM TO CARRIER CONNECT, PC4000
Calgary, Alberta, Canada, T2C 4L6 PROPERTY OF CANRIG DRILLING TECHNOLOGY CANADA
Website: www.canrig.com LTD, AND ARE NOT TO BE COPIED, REPRODUCED OR USED
Bus. (403) 237-6400
Fax. (403) 233-2667
IN ANY MANNER FOR ANY PURPOSE WHATSOEVER SHEET 1 OF 1
WITHOUT WRITTEN CONSENT OR DIRECTION.
REV. DESCRIPTION DATE
121300051
DATE CREATED: PART NO: REV:
A RFM 5/13/2008 November 21, 2007 2:37:37 PM A
 Engineering
Bill of Material
Part: 121500002
Description: ASSY, SPEAR, PC4000
Eng ID: 0
Drawing ID: 121500002M Rev No: A
Item Qty Units Part ID Description

01 1.00 EA 131100379 WELDMENT, SPEAR FRAME

02 1.00 EA 161500006 PLATE, SPEAR SLIDE
03 2.00 EA 161600002 MACHINED, SPEAR PIVOT BUSHING
04 2.00 EA M10533 FTG, GREASE, 1/8 NPT, PTF-SS
05 3.00 EA FH-0375NC-0063 CAPSCR, FLAT HD, 3/8-16UNC x 0.625

Printed: 4/23/2015
 4

5
2

CANRIG DRILLING TECHNOLOGY CANADA LIMITED © 2006

THE DRAWINGS, INFORMATION AND SUBJECT MATTER

7475 51 Street SE
HEREOF ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE ASSY, SPEAR, PC4100
Calgary, Alberta, Canada, T2C 4L6 PROPERTY OF CANRIG DRILLING TECHNOLOGY CANADA
Website: www.canrig.com LTD, AND ARE NOT TO BE COPIED, REPRODUCED OR USED
Bus. (403) 237-6400
Fax. (403) 233-2667
IN ANY MANNER FOR ANY PURPOSE WHATSOEVER SHEET 1 OF 1
WITHOUT WRITTEN CONSENT OR DIRECTION.
REV. DESCRIPTION DATE
121500002M
DATE CREATED: PART NO: REV:
A RFM 6/4/2008 21 November, 2007 1:46:33 PM A
 Engineering
Bill of Material
Part: AY50425
Description: ASSY, CBAL VLV BLOCK, RAMP, PC4000
Eng ID: 0
Drawing ID: AY50425 Rev No: A
Item Qty Units Part ID Description

01 1.00 EA H10355 MANIFOLD, HYD, INLINE

02 1.00 EA H10322 VLV, HYD, CBAL, 4.5:1 RATIO
03 1.00 EA H15-070220-08-06 ELL 90°, MALE 1/2 JIC, MALE 3/8 ORB
04 1.00 EA H15-070120-16-20 ADPT, MALE 1 JIC, MALE 1-1/4 ORB
05 1.00 EA H15-140109P-04 PLUG, SOC HEX, 1/4 NPT
06 1.00 EA H15-070220-16-20 ELL 90°, MALE 1 JIC, MALE 1-1/4 ORB
07 2.00 EA HH-0375NC-0400-GR8 CAPSCR, HEX HD, 3/8-16UNC x 4.00, GR8
08 4.00 EA FW-0375-A WASHER, F, 3/8, PLAIN, TYPE A
09 2.00 EA LN-0375NC-NL-GR8 LOCKNUT, 3/8-16UNC, NYLOCK, GR8

Printed: 4/23/2015
 6

9 8 8 7

5
2

REV. DESCRIPTION DATE

A RFM 6/3/2008
TITLE:
© 2009 CANRIG DRILLING TECHNOLOGY CANADA LIMITED
ALL RIGHTS RESERVED
THE DRAWINGS, INFORMATION AND SUBJECT MATTER HEREOF ASSY, CBAL VLV, RAMP, PC4000
ARE THE CONFIDENTIAL, SOLE AND EXCLUSIVE PROPERTY OF
CANRIG DRILLING TECHNOLOGY CANADA LTD, AND ARE NOT
TO BE COPIED, REPRODUCED, OR USED IN ANY MANNER FOR 7475 51 Street SE DRAWN BY: DATE: DRAWING NO: SHEET: REV:
ANY PURPOSE WHATSOEVER WITHOUT WRITTEN CONSENT Calgary, Alberta, Canada, T2C 4L6
OR DIRECTION. Website: www.canrig.com KJH 8/31/2007 AY50425 1 OF 1 A
Bus. (403) 237-6400 Fax. (403) 233-2667
 Engineering
Bill of Material

Part: AY51028
Description: HOSE ASSY, RAMP, PC4000
Eng ID: 1
Drawing ID: 183100009 Rev No: C
Item Qty Units Part ID Eng ID Description

H066 1.00 EA F471TC0641080808-10.75-X-8 VSA HOSE ASSY, 1/2, SWV STR, 90° LONG, 10.75
H067 1.00 EA F471TC0639080808-68.75-X-6 0 HOSE ASSY, 1/2, SWV STR, 90° SHT, 68.75
H068 1.00 EA F471TC0641080808-123.75-X- 0 HOSE ASSY, 1/2, SWV STR, 90°LONG, 123.75
H069 1.00 EA F471TC0641080808-60.75-X-5 VSA HOSE ASSY, 1/2, SWV STR, 90° LONG, 60.75
H070 1.00 EA F471TC0606080808-54.75-X-5 0 HOSE ASSY, 1/2, SWV STR, SWV STR, 54.75
H071 1.00 EA F471TC0639080808-30.75-X-2 0 HOSE ASSY, 1/2, SWV STR, 90° SHT, 30.75
H072 1.00 EA F471TC0639121212-167.75-X- 0 HOSE ASSY, 3/4, SWV STR, 90° SHT, 167.75
H073 1.00 EA F797TCJS6A162016-34.50-X- 0 HOSE ASSY, 1, SWV STR, CODE 62 STR, 34.5
H074 1.00 EA F721TC066A162016-29-X-25 0 HOSE ASSY, 1, SWV STR, CODE 62 STR, 29
H075 1.00 EA F797TCJSJ9161616-113-X-10 0 HOSE ASSY, 1, SWV STR, 90° SHT, 113
H077 1.00 EA F721TC0606161616-121-X-11 0 HOSE ASSY, 1, SWV STR, SWV STR, 121
1.00 EA AY51033 0 HOSE ASSY,GREASE LINE,RAMP SHEAVE,PC4000

Printed: #Name? Page 1 of 1

 183100009.dwg ()

FROM

#3
#17

#5
#16
CATWALK

8-8

16-16
16-16
12-12

4-4
4-4
Straight JIC Hose End
Straight JIC Hose End
Straight JIC Hose End

Straight ORFS Hose End

JIC X NPT Bulkhead Straight

JIC X NPT Bulkhead Straight
#68

8-8
8-8

4-4
4-4
JIC x JIC Straight

Long 90 JIC Hose End

Straight JIC Hose End

Straight JIC Hose End
8-8
ORB x FJIC Straight

8-8
8-8
ORB x JIC Straight

90 JIC Extension

#124
#124
Cavity Plug

8-8

#77
#75
#72
Straight JIC Hose End
8
8-8
8-8
8-8

ORB x JIC Straight

ORB x JIC Straight
ORB x JIC Straight

ORB PLUG HEX HD

45 d
JIC En
H e

#67
4- os os
4 e H -4
4
En JIC
d 45

8-8
8-8
8-8

Straight JIC Hose End

Straight JIC Hose End
Straight JIC Hose End

#70
#71
#69
GREASE LINES

8-8
4-8
ORB x JIC ADAPTER

Long 90 JIC Hose End

8-8

12-12
12-12 12-8
JIC MFM Tee JIC Reducer

90 JIC Hose End

90 JIC Hose End

12-12
VLV Check ORB x JIC
20-16
Flanged Hose End
Code 62
#73
20-16
Flanged Hose End 16-16-16
Code 62 #74 JIC Bulkhead Tee

16-16 16-16
Straight JIC Hose End JIC Hose End
16-8
JIC Reducer

8-8
Straight JIC Hose End
16-16

8-8-8
Straight ORFS Hose End

JIC MMF Run Tee

20-16

12-8
ORB x JIC Straight
90 JIC Hose End
ORB x ORFS Straight

8-8

#66

8-8
Straight JIC Hose End
8-8
16-16

20-16
90 ORFS Hose End

ORB x ORFS Straight

Straight JIC Hose End

ORB x JIC 90 Elbow

6-8

HYDRAULIC SPECIFICATIONS ELECTRICAL SPECIFICATIONS APPROVED BY: NOTICE

THE DRAWING, INFORMATION AND SUBJECT MATTER HEREOF ARE THE
HYDRAULIC PLUMBING HYDRAULIC COLOR CODE ELECTRICAL ENCLOSURES ELECTRICAL COLOR CODE CONFIDENTIAL, SOLE AND EXCLUSIVE PROPERTY OF CANRIG DRILLING
TECHNOLOGIES CANADA LTD. AND ARE NOT TO BE COPIED,
All HYDRAULIC HOSE TO BE RATED FOR A Pressure ---------- Red All electrical enclosures will be rated Nema Digital Input ------ Orange WHATSOEVER WITHOUT THE WRITTEN CONSENT OR DIRECTION.
MINIMUM OF 3000 PSI, TOUGH COVER, JIC Return ------------ Blue 4 or better and of Stainless Steel Digital Output ---- Yellow
37 ° FLARE CONNECTION UNLESS OTHERWISE Work Port A ------ Orange construction unless otherwise stated. Analog Input ----- Red
STATED. ALL ADAPTER FITTINGS TO BE ORB
DRAWN BY: BHK PC4000
Work Port B ------ Green ELECTRICAL WIRING Analog Output --- White
OR JIC UNLESS OTHERWISE STATED Pilot Flow --------- Brown 24 VDC Power ---- Red
All electrical wiring will be to CSA CHECKED BY: RAMP PLUMBING SCHEMATIC
Symbols ---------- Black 0 Volt -------------- Black
starndards for non classified, zone 0 and SCALE: SIZE: DATE ISSUED: DRAWING #: SHEET #: REV.
C 12/11/20 SH ADDED 6000psi HOSE KIT, ELIMINATED BLANK END HOSE FROM MANIFOLD AC Ground -------- Green
zone 1. Requirments
No. Y/M/D BY REVISIONS NTS D 05/15/08 183100009 1 OF 1 C

2 of 3
 Engineering
Bill of Material

Part: AY51033
Description: HOSE ASSY,GREASE LINE,RAMP
SHEAVE,PC4000
Eng ID: 0
Drawing ID: 183100009 Rev No: C
Item Qty Units Part ID Eng ID Description

H132A 1.00 EA F471TC0637040404-40.50-X-3 0 HOSE ASSY, 1/4, SWV STR, 45° SHT, 40.50
H132B 1.00 EA F471TC0637040404-40.50-X-3 0 HOSE ASSY, 1/4, SWV STR, 45° SHT, 40.50

Printed: #Name? Page 1 of 1

 183100009.dwg ()

FROM

#3
#17

#5
#16
CATWALK

8-8

16-16
16-16
12-12

4-4
4-4
Straight JIC Hose End
Straight JIC Hose End
Straight JIC Hose End

Straight ORFS Hose End

JIC X NPT Bulkhead Straight

JIC X NPT Bulkhead Straight
#68

8-8
8-8

4-4
4-4
JIC x JIC Straight

Long 90 JIC Hose End

Straight JIC Hose End

Straight JIC Hose End
8-8
ORB x FJIC Straight

8-8
8-8
ORB x JIC Straight

90 JIC Extension

#124
#124
Cavity Plug

8-8

#77
#75
#72
Straight JIC Hose End
8
8-8
8-8
8-8

ORB x JIC Straight

ORB x JIC Straight
ORB x JIC Straight

ORB PLUG HEX HD

45 d
JIC En
H e

#67
4- os os
4 e H -4
4
En JIC
d 45

8-8
8-8
8-8

Straight JIC Hose End

Straight JIC Hose End
Straight JIC Hose End

#70
#71
#69
GREASE LINES

8-8
4-8
ORB x JIC ADAPTER

Long 90 JIC Hose End

8-8

12-12
12-12 12-8
JIC MFM Tee JIC Reducer

90 JIC Hose End

90 JIC Hose End

12-12
VLV Check ORB x JIC
20-16
Flanged Hose End
Code 62
#73
20-16
Flanged Hose End 16-16-16
Code 62 #74 JIC Bulkhead Tee

16-16 16-16
Straight JIC Hose End JIC Hose End
16-8
JIC Reducer

8-8
Straight JIC Hose End
16-16

8-8-8
Straight ORFS Hose End

JIC MMF Run Tee

20-16

12-8
ORB x JIC Straight
90 JIC Hose End
ORB x ORFS Straight

8-8

#66

8-8
Straight JIC Hose End
8-8
16-16

20-16
90 ORFS Hose End

ORB x ORFS Straight

Straight JIC Hose End

ORB x JIC 90 Elbow

6-8

HYDRAULIC SPECIFICATIONS ELECTRICAL SPECIFICATIONS APPROVED BY: NOTICE

THE DRAWING, INFORMATION AND SUBJECT MATTER HEREOF ARE THE
HYDRAULIC PLUMBING HYDRAULIC COLOR CODE ELECTRICAL ENCLOSURES ELECTRICAL COLOR CODE CONFIDENTIAL, SOLE AND EXCLUSIVE PROPERTY OF CANRIG DRILLING
TECHNOLOGIES CANADA LTD. AND ARE NOT TO BE COPIED,
All HYDRAULIC HOSE TO BE RATED FOR A Pressure ---------- Red All electrical enclosures will be rated Nema Digital Input ------ Orange WHATSOEVER WITHOUT THE WRITTEN CONSENT OR DIRECTION.
MINIMUM OF 3000 PSI, TOUGH COVER, JIC Return ------------ Blue 4 or better and of Stainless Steel Digital Output ---- Yellow
37 ° FLARE CONNECTION UNLESS OTHERWISE Work Port A ------ Orange construction unless otherwise stated. Analog Input ----- Red
STATED. ALL ADAPTER FITTINGS TO BE ORB
DRAWN BY: BHK PC4000
Work Port B ------ Green ELECTRICAL WIRING Analog Output --- White
OR JIC UNLESS OTHERWISE STATED Pilot Flow --------- Brown 24 VDC Power ---- Red
All electrical wiring will be to CSA CHECKED BY: RAMP PLUMBING SCHEMATIC
Symbols ---------- Black 0 Volt -------------- Black
starndards for non classified, zone 0 and SCALE: SIZE: DATE ISSUED: DRAWING #: SHEET #: REV.
C 12/11/20 SH ADDED 6000psi HOSE KIT, ELIMINATED BLANK END HOSE FROM MANIFOLD AC Ground -------- Green
zone 1. Requirments
No. Y/M/D BY REVISIONS NTS D 05/15/08 183100009 1 OF 1 C

2 of 3
 SUBSECTION 7E: SCHEMATICS

Schematic Description Schematic Rev

EL5028-00 INDEX EL5028-00 A

EL5028-03 SYMBOL LEGEND EL5028-03 A
EL5028-04 PC4000, PIPE CONTROL SYSTEM LAYOUT EL5028-04 A
EL5028-05 PC4000, PIPE CONTROL SYSTEM POWER DISTRIBUTION, 120VAC EL5028-05 A
EL5028-06 PC4000, PIPE CONTROL SYSTEM POWER DISTRIBUTION, 24VDC EL5028-06 A
EL5028-07 PC4000, PIPE CONTROL SYSTEM POWER DISTRIBUTION, 24VDC EL5028-07 A
EL5028-08 PC4000, PIPE CONTROL SYSTEM PLC LAYOUT EL5028-08 A
EL5028-09 EMPTY PAGE EL5028-09 A
EL5028-10 PC4000, PIPE CONTROL SYSTEM PLC CONFIGURATION EL5028-10 A
EL5028-11 PC4000, PIPE CONTROL SYSTEM PLC CONFIGURATION EL5028-11 A
EL5028-12 PC4000, PIPE CONTROL SYSTEM PLC CONFIGURATION EL5028-12 A
EL5028-21 PC4000, PIPE CONTROL SYSTEM PLC SLOT 0, DIGITAL INPUT 1 EL5028-21 A
EL5028-22 PC4000, PIPE CONTROL SYSTEM PLC SLOT 1, DIGITAL INPUT 2 EL5028-22 A
EL5028-23 PC4000, PIPE CONTROL SYSTEM PLC SLOT 2, DIGITAL OUTPUT 1 EL5028-23 A
EL5028-24 PC4000, PIPE CONTROL SYSTEM PLC SLOT 3, DIGITAL OUTPUT 2 EL5028-24 A
EL5028-25 PC4000, PIPE CONTROL SYSTEM PLC SLOT 4, DIGITAL INPUT 3 EL5028-25 A
EL5028-26 PC4000, PIPE CONTROL SYSTEM PLC SLOT 5, ANALOG INPUT EL5028-26 A
EL5028-27 PC4000, PIPE CONTROL SYSTEM PLC SLOT 6, ANALOG OUTPUT EL5028-27 A
EL5028-28 PC4000, PIPE CONTROL SYSTEM PLC SLOT 7, HI SPEED COUNTER EL5028-28 A
EL5028-29 PC4000, PIPE CONTROL SYSTEM CABLE LAYOUT EL5028-29 A
EL5028-30 EMPTY PAGE EL5028-30 A
EL5028-31 PC4000, PIPE CONTROL SYSTEM SOLA CE1500MH XFMR EL5028-31 A
181100006 PC4000, HYDRAULIC SCHEMATIC 181100006 C

5/7/2015 Serial Number 400071