aerospace

climate control
electromechanical
filtration
fluid & gas handling
hydraulics
pneumatics
process control
sealing & shielding

Compact Spiral™ Hose

Unprecedented performance and flexibility
Unprecedented 35.0 (5000 psi) and 42.0 MPa (6000 psi)
hose performance in a compact design.

Compared with conventional

spiral hose, Parker’s Compact
SpiralTM 787TC/797TC hose of-
fers measurably greater advan-
tages in routing and installation,
product size and weight, inven-
tory savings and much more.
A world’s first, this development
is the most significant advance-
ment in hydraulic hose since
the introduction of Parker’s
No-SkiveTM technology more
than 25 years ago.

Compact Spiral was developed

in concurrence with the industry
trend toward highpressure
hose manufactured to meet
ISO 18752 performance
specifications.

Its many innovative and

proprietary features set new
standards in value and deliver
hose characteristics deemed
most important by OEM and
aftermarket customers.
787TC
ISO 18752-DC
Recommended Fluids:
Pressure Rating Petroleum base hydraulic
Part Number ISO 18752 fluids and lubricating oils

#
Performance
min. Inner tube: Proprietary
Grade Hose Hose max. dynamic
min. burst bend weight Parkrimp synthetic rubber
I.D. O.D. working
pressure radius
pressure Reinforcement:
DN Inch Size mm mm MPa psi MPa psi mm kg Serie 77 Four or six spiral steel wires
787TC-8 DC 12 1/2 -8 12.7 21.1 35 5000 140 20000 90 0.67 • Cover: Synthetic rubber,
MSHA accepted
787TC-10 DC 16 5/8 -10 15.9 23.9 35 5000 140 20000 100 0.80 • Temperature range:
787TC-12 DC 19 3/4 -12 19.1 27.9 35 5000 140 20000 120 1.16 • -40°C to +125°C
(-40°F to +257°F)
787TC-16 DC 25 1 -16 25.4 35.7 35 5000 140 20000 150 1.74 •
787TC-20 DC 31 1 1/4 -20 31.8 44.9 35 5000 140 20000 210 2.89 •
787TC-24 DC 38 1 1/2 -24 38.1 52.8 35 5000 140 20000 255 3.96 •
787TC-32 DC 51 2 -32 50.8 67.6 35 5000 140 20000 318 6.50 •
Manufactured to meet ISO 18752 performance specifications, Parker Compact SpiralTM Hose delivers significant advantages in
routing and installation ease, system size and weight, inventory savings and much more, over SAE 100R13 and 100R15 hose.

797TC
ISO 18752
Recommended Fluids:
Pressure Rating Petroleum base hydraulic
Part Number ISO 18752 fluids and lubricating oils

# Performance
Grade Hose Hose max. dynamic
min. burst
min.
bend weight Parkrimp
Inner tube: Proprietary
synthetic rubber
I.D. O.D. working
pressure radius Reinforcement:
pressure
DN Inch Size mm mm MPa psi MPa psi mm kg Serie 77 Four or six spiral steel wires

797TC-8 DC 12 1/2 -8 12.7 21.1 42 6000 168 24000 100 0.67 • Cover: Synthetic rubber,
MSHA accepted
797TC-10 DC 16 5/8 -10 15.9 23.9 42 6000 168 24000 115 0.80 • Temperature range:
797TC-12 DC 19 3/4 -12 19.1 27.9 42 6000 168 24000 135 1.16 • -40°C to +125°C
(-40°F to +257°F)
797TC-16 DC 25 1 -16 25.4 35.7 42 6000 168 24000 165 1.74 •
797TC-20 DC 31 1 1/4 -20 31.8 44.9 42 6000 168 24000 225 2.89 •
797TC-24 CC 38 1 1/2 -24 38.1 52.8 42 6000 168 24000 305 3.96 •
797TC-32 CC 51 2 -32 50.8 67.6 42 6000 168 24000 380 6.50 •
Manufactured to meet ISO 18752 performance specifications, Parker Compact Spiral Hose delivers significant advantages in
routing and installation ease, system size and weight, inventory savings and much more, over SAE 100R13 and 100R15 hose.
Compact Spiral Hose has half
the bend radius of its SAE
counterpart and a significantly
smaller bend radius than Compact Spiral TM

corresponding-size
Parker conventional Bend Radius
spiral hose. Not only is it 1/2 the
bend radius, but it takes
1/3 less effort to bend.

Compact SpiralTM 797TC-12 SAE 100R15

has1/2 the
Bend Radius

534 mm

270 mm

Nearly 30 % smaller O.D.

A key reason for Compact Spi-
ral’s notably easier handling and Twice the impulse
Half the bend radius with routing, this feature also enables Compact Spiral Hose is tested
one-third less effort bends to start sooner than with to 2,000,000 cycles – two times
Providing remarkable flexibility conventional spiral, resulting the ISO 18752-DC impulse cycle
and routing ease, the bend ra- in hose savings, reduction of standard and four times the SAE
dius of Compact Spiral 787TC/ shaped hose ends – and there is impulse requirement. The result is
797TC is respectively half that less chance of over-bending. a hose superior in both perform-
of SAE 100R13/SAE 100R15 ance and service life.
conventional spiral hose. VALUE
Smaller O.D. enables you to fit VALUE
VALUE more hose in tight quarters or Twice the impulse life
Half the bend radius can helps you jump up a hose size increases your hose life in your
reduce your hose needs 20 % for better flow characteristics. application, extending the time
to 55 %. between replacements.
 High abrasion resistance Increased Flexibility
The highly abrasion-resistant Many hoses today are rated to
cover of Compact Spiral Hose 1/2 SAE bend radius, but can
delivers long, dependable serv- you get them there? Compact
ice life in rigorous and/or remote Spiral’s design and process
installations. technology make it the most
flexible and easiest to bend spi-
VALUE ral hose on the market.
Parker’s Tough CoverTM will
outlast non-abrasion resistant
covers, extending hose life and
increasing intervals between
hose change outs.

Constant pressure
Made to ISO 18752-DC hose
specifications, Compact Spiral
787TC (5000 psi) and 797TC
(6000 psi) each provide con-
stant-pressure performance
across all sizes.

Less-bulky inner tube and outer

wall construction results in up to
one-third smaller Compact Spiral
Hose O.D. area, enabling easier
routing, hose savings and space
savings.

100R15 797TC-12 VALUE

Less force to flex means
improved and easier routing,
resulting in reduced installer
fatigue and faster installation
times for greater overall effici-
ency.
Compact SpiralTM 787TC/797TC
is rated to ISO 18752 Type DC
ISO 18752 Performance Definitions (4.2 Grades and Types)
Resistance to Impulse
Grade Type a
Temperature Impulse Pressure Minimum Number
°C ( % of MBDb) of Cycles
AS
A 100 133 % 200.000
AC
BS
B 100 133 % 500.000
BC
CS
C 120 133 % and 120 %c 500.000
CC

D DC 120 133 % 1.000.000

a
Standard or compact, e.g. CS is grade C and standard type.
Standard types have larger outside diameters and larger bend radii and compact types have smaller outside diameters
and smaller bend radii.
b
Maximum working pressure.
c
120 % of the MWP shall be used for classes 350, 420 and 560 instead of 133 %.
ISO 18752 classifies according to their resistance to impulse into four grades: A, B, C and D. Each grade is classified by
outside diameter into standard types (AS, BS and CS) and compact types (AC, BC, CC and DC) as shown in this table

Interlock No-Skive design

Compact Spiral Hose features
Parker’s exclusive Interlock
No-Skive design, with both
internal and external “Bite the
Wire” technology for assured
connection strength.

VALUE
Better hose to fitting connec-
tion reduces leaks and incre-
ases holding power.

Weather Seal

Sealing and additional holding power

 Just one series of hose ends,
Parker’s 77 Series, covers all
sizes of both 787TC and 797TC
Compact Spiral Hose, simplify-
ing fitting selection and reducing
hose-end inventory.

Wide fluid compatibility Advancing the industry

Parker’s patent-pending inner Compact Spiral Hose delivers
tube compound provides enhan- substantial performance and
ced fluid compatibility value for systems with high pres-
(e.g., environmental fluids, sure, high impulse applications.
Polyol Esters), improved tube These include injection molding,
aging and prolonged life. oil and gas, and large mobile
equipment including off-high-
VALUE way, construction, forestry and Many Parker crimper models
mining. such as KarryKrimp® 2, used for
Reduces need for specialty
crimping smaller-size hose, and
hoses for non standard fluids.
Surveys in these markets have Parkrimp® 2 can be used
Better heat aging of tube ex-
indicated pressure rating, routing to crimp 787TC and 797TC
tends hose life.
ease, abrasion resistance, bend Compact Spiral hose.
radius and weight as being top
priorities in hose selection for Contact your local
such applications. Parker representative for a
demonstration of Compact
Spiral today!

For more details about Parker

crimper models please visit us
on www.easy-crimping.com
Parker Worldwide

Europe, Middle East, Africa HU – Hungary, Budaörs ZA – South Africa, Kempton Park
Tel: +36 23 885 470 Tel: +27 (0)11 961 0700
AE – United Arab Emirates, parker.hungary@parker.com parker.southafrica@parker.com
Dubai
Tel: +971 4 8127100 IE – Ireland, Dublin
parker.me@parker.com Tel: +353 (0)1 466 6370 North America
parker.ireland@parker.com CA – Canada, Milton, Ontario
AT – Austria, Wiener Neustadt
Tel: +43 (0)2622 23501-0 IT – Italy, Corsico (MI) Tel: +1 905 693 3000
parker.austria@parker.com Tel: +39 02 45 19 21 US – USA, Cleveland
parker.italy@parker.com Tel: +1 216 896 3000
AT – Eastern Europe, Wiener
Neustadt KZ – Kazakhstan, Almaty
Tel: +43 (0)2622 23501 900 Tel: +7 7273 561 000 Asia Pacific
parker.easteurope@parker.com parker.easteurope@parker.com
AU – Australia, Castle Hill
AZ – Azerbaijan, Baku NL – The Netherlands, Oldenzaal Tel: +61 (0)2-9634 7777
Tel: +994 50 2233 458 Tel: +31 (0)541 585 000
parker.azerbaijan@parker.com parker.nl@parker.com CN – China, Shanghai
Tel: +86 21 2899 5000
BE/LU – Belgium, Nivelles NO – Norway, Asker
Tel: +32 (0)67 280 900 Tel: +47 66 75 34 00 HK – Hong Kong
parker.belgium@parker.com parker.norway@parker.com Tel: +852 2428 8008

BG – Bulgaria, Sofia PL – Poland, Warsaw IN – India, Mumbai

Tel: +359 2 980 1344 Tel: +48 (0)22 573 24 00 Tel: +91 22 6513 7081-85
parker.bulgaria@parker.com parker.poland@parker.com JP – Japan, Tokyo
BY – Belarus, Minsk PT – Portugal, Leca da Palmeira Tel: +81 (0)3 6408 3901
Tel: +375 17 209 9399 Tel: +351 22 999 7360 KR – South Korea, Seoul
parker.belarus@parker.com parker.portugal@parker.com Tel: +82 2 559 0400
CH – Switzerland, Etoy RO – Romania, Bucharest MY – Malaysia, Shah Alam
Tel: +41 (0)21 821 87 00 Tel: +40 21 252 1382 Tel: +60 3 7849 0800
parker.switzerland@parker.com parker.romania@parker.com
NZ – New Zealand, Mt Wellington
CZ – Czech Republic, Klecany RU – Russia, Moscow Tel: +64 9 574 1744
Tel: +420 284 083 111 Tel: +7 495 645-2156
parker.russia@parker.com SG – Singapore
parker.czechrepublic@parker.com
Tel: +65 6887 6300
DE – Germany, Kaarst SE – Sweden, Spånga
Tel: +46 (0)8 59 79 50 00 TH – Thailand, Bangkok
Tel: +49 (0)2131 4016 0
parker.sweden@parker.com Tel: +662 186 7000-99
parker.germany@parker.com
SK – Slovakia, Banská Bystrica TW – Taiwan, Taipei
DK – Denmark, Ballerup
Tel: +421 484 162 252 Tel: +886 2 2298 8987
Tel: +45 43 56 04 00
parker.denmark@parker.com parker.slovakia@parker.com
ES – Spain, Madrid SL – Slovenia, Novo Mesto South America
Tel: +34 902 330 001 Tel: +386 7 337 6650 AR – Argentina, Buenos Aires
parker.spain@parker.com parker.slovenia@parker.com Tel: +54 3327 44 4129
FI – Finland, Vantaa TR – Turkey, Istanbul BR – Brazil, Sao Jose dos Campos
Tel: +358 (0)20 753 2500 Tel: +90 216 4997081 Tel: +55 800 727 5374
parker.finland@parker.com parker.turkey@parker.com
CL – Chile, Santiago
FR – France, Contamine s/Arve UA – Ukraine, Kiev Tel: +56 2 623 1216
Tel: +33 (0)4 50 25 80 25 Tel +380 44 494 2731
MX – Mexico, Toluca
parker.france@parker.com parker.ukraine@parker.com
Tel: +52 72 2275 4200
GR – Greece, Athens UK – United Kingdom, Warwick
Tel: +30 210 933 6450 Tel: +44 (0)1926 317 878 European Product Information Centre
parker.greece@parker.com parker.uk@parker.com Free phone: 00 800 27 27 5374
(from AT, BE, CH, CZ, DE, DK, EE, ES, FI,
FR, IE, IL, IS, IT, LU, MT, NL, NO, PL, PT, RU,
SE, SK, UK, ZA)

© 2013 Parker Hannifin Corporation. All rights reserved. Bulletin BUL/B4480-B150/UK 2013-11
punctum
Parker Hannifin Ltd.
Tachbrook Park Drive
Tachbrook Park,
Warwick, CV34 6TU
United Kingdom
Tel.: +44 (0) 1926 317 878
Fax: +44 (0) 1926 317 855
parker.uk@parker.com Your local authorized Parker distributor

www.parker.com