Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 8 views

    EM - S2023 (3132005) (GTURanker - Com)

    Uploaded by

    keyox91029
    pyq em gtu

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    EM - S2023 (3132005) (GTURanker - Com)

    Uploaded by

    keyox91029
    8 views2 pages
    pyq em gtu

    Original Title

    EM - S2023 [3132005] [GTURanker.com]

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    pyq em gtu

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    8 views2 pages

    EM - S2023 (3132005) (GTURanker - Com)

    Uploaded by

    keyox91029
    pyq em gtu

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Seat No.: ________ Enrolment No.

    ___________

    GUJARAT TECHNOLOGICAL UNIVERSITY


    BE - SEMESTER–III(NEW) EXAMINATION – SUMMER 2023
    Subject Code:3132005 Date:03-08-2023
    Subject Name:Engineering Mechanics
    Time:02:30 PM TO 05:00 PM Total Marks:70
    Instructions:
    1. Attempt all questions.
    2. Make suitable assumptions wherever necessary.
    3. Figures to the right indicate full marks.
    4. Simple and non-programmable scientific calculators are allowed.

    Marks
    Q.1 (a) Prove Lami’s Theorem. 03
    (b) Define 1) static friction 2) kinetic friction 3) cone of friction 4) angle of 04
    repose.
    (c) Find a single resultant force for given Non concurrent force system with 07
    respect to point ‘O’ as shown in fig-1. 10 N force is applied at the center
    point. Also find the “Equilibrant”.
    Q.2 (a) Draw free body diagram for all three spheres shown in fig-2. Name all 03
    the forces and find angles between them.
    (b) As shown in fig-3, two objects need to set on the shelf having inclination 04
    of 33°. Calculate load ‘P’ and tension ‘T’ which is required to place the
    objects properly. Coefficient of friction between two objects is 0.4 and
    0.485 between shelf and the second object.
    (c) Analyze the beam shown in fig-4 for shear force and bending moment at 07
    all salient points of the beam.
    OR
    (c) Define determinacy and indeterminacy with the help of truss structure. 07

    Q.3 (a) Give brief details about both the analysis methods for the truss. 03
    (b) Find reaction at A and B for beam given in fig-5 04
    (c) Find the balance point for the shape shown in fig-6. 07
    OR
    Q.3 (a) Explain moment of inertia. 03
    (b) Calculate moment of inertia with respect to X axis passing through the 04
    center of the section shown in fig-7.
    (c) Derive the relation between force, shear force and bending moment. 07

    Q.4 (a) Explain shear stress distribution for rectangular section with help of 03
    formula.
    (b) For the same beam given in fig-5, draw shear force and bending moment 04
    diagram with value of maximum value of bending moment.
    (c) Find the depth of simply supported beam having UDL of 50 kN/m 07
    throughout its 8 m long span. Width of beam is 150 mm and maximum
    stress allowed by the material is 100 N/mm2.
    OR
    Q.4 (a) Explain pure bending. 03

    1
    (b) A circular steel bar is 4 m long. It’s diameter at one end is 100 mm and at 04
    other end it is 50 mm. The bar is under tensile force of 50 kN. Calculate
    the change in length for this tapered bar.
    (c) Explain all types of material with the graph of their behavior under axial 07
    stress.
    Q.5 (a) Define 1) Poisson’s ratio, 2) bulk modulus, 3) modulus of rigidity. 03
    (b) A copper bar is 0.8 m long and it can expand by 0.48 mm under thermal 04
    expansion. Will any stress be generated if temperature is increased to
    40°C from current temperature 24°C? α c = 16X10-6/°C, E= 100 GPa.
    (c) Write the steps to draw Mohr circle for stress condition with two normal 07
    stresses and one tangential stress.
    OR
    Q.5 (a) Derive relation between Young’s modulus, bulk modulus and modulus of 03
    rigidity.
    (b) Find total deformation of the bar shown in fig-8. E= 200 GPa. 04
    (c) Find the principle stresses and angles of principal planes, if one tensile 07
    stress of 300 N/mm2, one compressive stress of 200 N/mm2 and shear
    stress of 150 N/mm2 is applied to the system.

    You might also like