Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
43 views

raspberry-pi-ai-hat

raspberry

Uploaded by

youssouf isma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
43 views

raspberry-pi-ai-hat

raspberry

Uploaded by

youssouf isma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Raspberry Pi AI HAT+

Published October 2024

Raspberry Pi Ltd
Overview

The Raspberry Pi AI HAT+ is an add-on board with a built-in Hailo AI accelerator for
Raspberry Pi 5. It provides an accessible, cost-effective, and power-efficient way to
integrate high-performance AI. Explore applications including process control, security,
home automation, and robotics.

The AI HAT+ is available in 13 and 26 tera-operations per second (TOPS) variants,


built around the Hailo-8L and Hailo-8 neural network inference accelerators. The 13
TOPS variant capably runs neural networks for applications including object detection,
semantic and instance segmentation, pose estimation, and more. The 26 TOPS variant
can handle larger networks, can run them more quickly, and can more effectively run
multiple networks simultaneously.

The AI HAT+ communicates using Raspberry Pi 5’s PCIe Gen 3 interface. When the host
Raspberry Pi 5 is running an up-to-date Raspberry Pi OS image, it automatically detects
the on-board Hailo accelerator and makes the NPU available for AI computing tasks. The
built-in rpicam-apps camera applications in Raspberry Pi OS natively support the AI
module, automatically using the NPU to run compatible post-processing tasks.

Raspberry Pi AI HAT+ – Raspberry Pi Ltd 2


Specification

Features:  ailo-8 or Hailo-8L accelerator offering 26 TOPS or 13 TOPS


H
inferencing performance respectively
Fully integrated into Raspberry Pi’s camera software stack
Conforms to Raspberry Pi HAT+ specification

Supplied with 16mm stacking header, spacers, and screws to
enable fitting on Raspberry Pi 5 with Raspberry Pi Active Cooler
in place

Operating temperature: 0℃ to 50℃ (ambient)

Production lifetime:  he Raspberry Pi AI HAT+ will remain in production until at least


T
January 2030

Compliance:  or a full list of local and regional product approvals, please


F
visit pip.raspberrypi.com

List price: AI HAT+ 13 TOPS – $70


AI HAT+ 26 TOPS – $110

Raspberry Pi AI HAT+ – Raspberry Pi Ltd 3


Physical specification

65
58

29

17.5

18
49 56.5
17
14.5 Note:

All dimensions in mm

17 16.5 All dimensions are approximate and for


reference purposes only. The dimensions
21
shown should not be used for producing
3.5 16 production data

The dimensions are subject to part and


manufacturing tolerances
2.55
3.5 Dimensions may be subject to change
47.5 10 7.5

WARNINGS
• The Raspberry Pi AI HAT+ shall only be connected to a Raspberry Pi via the PCIe interface and GPIO header.
• This product should be operated in a well-ventilated environment, and if used inside a case, the case should not be
covered.
• Whilst in use, this product should be firmly secured, and should not be contacted by conductive items.
• All peripherals used with this product should comply with relevant standards for the country of use and be marked
accordingly to ensure that safety and performance requirements are met.
• The cables and connectors of all peripherals used with this product must have adequate insulation so that relevant
safety requirements are met.
• Operation of this device requires adult supervision.

SAFETY INSTRUCTIONS
To avoid malfunction or damage to this product, please observe the following:
• Do not expose to water or moisture, or place on a conductive surface whilst in operation.
• Do not expose to heat from any source; Raspberry Pi computers and the Raspberry Pi AI HAT+ are designed for
reliable operation at normal ambient temperatures.
• Take care whilst handling to avoid mechanical or electrical damage to the printed circuit board and connectors.
• Whilst it is powered, avoid handling the printed circuit board, or only handle it by the corners to minimise the risk of
electrostatic discharge damage.

Raspberry Pi AI HAT+ – Raspberry Pi Ltd 4


Raspberry Pi AI HAT+ – Raspberry Pi Ltd 5
Raspberry Pi is a trademark of Raspberry Pi Ltd

You might also like