P10P2S / P11E2S

www.FGWilson.com

Output Ratings
Generating Set Model P10P2S P11E2S
Prime* Standby*

220-240V, 50 Hz 10.0 kVA 11.0 kVA

10.0 kW 11.0 kW

240V, 60 Hz 12.0 kVA 13.0 kVA

12.0 kW 13.0 kW

* Refer to ratings definitions on page 4.

Ratings at 1.0 power factor.

Technical Data
Engine Make & Model: Perkins 403C-15

Alternator Model: LLB1014H

Base Frame Type: Heavy Duty Fabricated Steel

Circuit Breaker Type: 3 Pole MCB

Frequency: 50 Hz 60 Hz

Engine Speed: RPM 1500 1800

Fuel Tank Capacity: litres (US gal) 45 (11.9)

Fuel Consumption: P10P2S l/hr (US gal/hr) 3.7 (1.0) 4.3 (1.1)

Fuel Consumption: P11E2S l/hr (US gal/hr) 4.1 (1.1) 4.7 (1.2)

FG Wilson has manufacturing facilities in the following

locations:
Northern Ireland · Brazil · China · India · USA
With headquarters in Northern Ireland, FG Wilson operates through a Global
Dealer Network. To contact your local Sales Office please visit the FG Wilson
website at www.FGWilson.com
P10P2S / P11E2S

Engine Technical Data

Physical Data Air System 50 Hz 60 Hz

Manufacturer: Perkins Air Filter Type: Replaceable Element

Model: 403C-15 Combustion Air Flow:
No. of Cylinders/Alignment: 3 / In Line m³/min (cfm) -Standby: 0.8 (28) 1.0 (35)
Cycle: 4 Stroke -Prime: 0.8 (28) 1.0 (35)
Induction: Naturally Aspirated Max. Combustion Air Intake
Restriction: kPa (in H2O) 6.4 (25.7) 6.4 (25.7)

Cooling Method: Radiator Cooling Air Flow:

Water
Governing Type: Mechanical m³/min (cfm) 26.0 (918) 35.0 (1236)
Governing Class: ISO 8528 G2 External Restriction to
Compression Ratio: 22.5:1 Cooling Air Flow: Pa (in H2O) 125 (0.5) 125 (0.5)
Displacement: l (cu.in) 1.5 (91.3)
Bore/Stroke: mm (in) 84.0 (3.3)/90.0 (3.5) Cooling System 50 Hz 60 Hz
Moment of Inertia: kg m² (lb. in²) 2.50 (8543)
Cooling System Capacity:
Engine Electrical System:
l (US gal) 5.8 (1.5) 5.8 (1.5)
-Voltage/Ground: 12/Negative
Water Pump Type: Centrifugal
-Battery Charger Amps: 55
Heat Rejected to Water &
Weight: kg (lb) - Dry: 197 (434)
Lube Oil: kW (Btu/min)
- Wet: 208 (459)
-Standby: 9.7 (552) 12.4 (705)
Performance 50 Hz 60 Hz -Prime: 8.6 (489) 11.3 (643)
Heat Radiation to Room:
Engine Speed: RPM 1500 1800
kW (Btu/min) -Standby: 4.8 (273) 6.1 (347)
Gross Engine Power: kW (hp)
-Prime: 4.2 (239) 5.5 (313)
-Standby: 13.5 (18.0) 16.2 (22.0) Radiator Fan Load: kW (hp) 0.2 (0.2) 0.3 (0.4)
-Prime: 12.2 (16.0) 14.7 (20.0)
Cooling system designed to operate in ambient conditions up to 50°C (122°F).
BMEP: kPa (psi)
Contact your local FG Wilson dealer for power ratings at specific site conditions.
-Standby: 722.0 (104.7) 722.0 (104.7)
-Prime: 652.0 (94.6) 655.0 (95.0)
Lubrication System
Regenerative Power: kW 4.5 5.8
Oil Filter Type: Spin-On, Full Flow
Total Oil Capacity l (US gal): 6.0 (1.6)

Fuel System Oil Pan l (US gal): 4.5 (1.2)

Oil Type: AP1CH4 15W-40
Fuel Filter Type: Replaceable Element Cooling Method: Water
Recommended Fuel: Class A2 Diesel
Fuel Consumption: l/hr (US gal/hr)
Exhaust System 50 Hz 60 Hz
110% 100% 75% 50%
Load Load Load Load Silencer Type: Level 1
P10P2S Silencer Model & Qty: MXC0996 (1)
50 Hz Pressure Drop Across
4.1 (1.1) 3.7 (1.0) 2.8 (0.7) 2.1 (0.6)
60 Hz Silencer System: kPa (in Hg) 0.70 (0.207) 8.20 (2.421)
4.7 (1.2) 4.3 (1.1) 3.2 (0.8) 2.4 (0.6)
Silencer Noise Reduction

P11E2S Level: dB 21.4 10

Max. Allowable Back
50 Hz 4.1 (1.1) 3.0 (0.8) 2.2 (0.6)
Pressure: kPa (in. Hg) 10.2 (3.0) 10.2 (3.0)
60 Hz 4.7 (1.2) 3.5 (0.9) 2.5 (0.7)
Exhaust Gas Flow:
(based on diesel fuel with a specific gravity of 0.85 and conforming to m³/min (cfm) -Standby: 2.9 (102) 3.4 (119)
BS2869, Class A2) -Prime: 2.7 (96) 3.1 (111)
Exhaust Gas Temperature: °C (°F)
m³/min (cfm) -Standby: 490 (914) 505 (941)
-Prime: 445 (833) 455 (851)

2
 P10P2S / P11E2S

Alternator Performance Data

50 Hz 60 Hz
Data Item 240V 230V 220V

220V/110V 240V/120V

Motor Starting
Capability* kVA 15 14 14 12 14

Short Circuit
Capacity** % - - - - -

Reactances:
Per Unit

Xd 1.220 1.320 1.450 1.890 1.750

X'd 0.230 0.250 0.270 0.350 0.330

X''d 0.109 0.119 0.130 0.170 0.158

Reactances shown are applicable to prime ratings

* Based on 30% voltage dip. Improved motor starting capability is available with optional Permanent Magnet generator or AREP excitation.
** With optional Permanent Magnet generator or AREP excitation.

Alternator Technical Data

Physical Data Operating Data

Manufacturer: FG WILSON Overspeed: RPM 2250

Model: LLB1014H Voltage Regulation (steady state) (%): +/- 1.0

No. of Bearings: 1 Wave Form NEMA = TIF: 50

Insulation Class: H Wave Form IEC = THF: 2.0%

Winding Pitch Code: 2/3 - M Total Harmonic Content LL/LN: 4.0%

Supression is in line with European Standard

Wires: 4 Radio Interference: EN61000-6

Ingress Protection Rating: IP23 Radiant Heat: kW (Btu/min)

Excitation System: SHUNT -50 Hz: 2.2 (125)

AVR Model: R230 -60 Hz: 2.7 (154)

3
P10P2S / P11E2S

Technical Data
1 Phase Ratings and Performance at 50 Hz, 1500 RPM 1 Phase Ratings and Performance at 60 Hz, 1800 RPM

Prime Model Standby Model Prime Model Standby Model

Voltage Voltage
P10P2S P11E2S P10P2S P11E2S
kVA kW kVA kW kVA kW kVA kW
240V 10.0 10.0 11.0 11.0
230V 10.0 10.0 11.0 11.0
220V 10.0 10.0 11.0 11.0

220V/110V 11.8 11.8 12.9 12.9

240V/120V 12.0 12.0 13.0 13.0

Definitions
Standby Rating Prime Rating Standard Reference Conditions
These ratings are applicable for supplying These ratings are applicable for supplying Note: Standard reference conditions 27°C
continuous electrical power (at variable load) continuous electrical power (at variable load) (80°F) Air Inlet Temp, 152.4m (500ft) A.S.L.
in the event of a utility power failure. No in lieu of commercially purchased power. 60% relative humidity. Fuel consumption data
overload is permitted on these ratings. The There is no limitation to the annual hours of at full load with diesel fuel with specific gravity
alternator on this model is peak continuous operation and this model can supply 10% of 0.85 and conforming to BS2869: 1998,
rated (as defined in ISO 8528-3). overload power for 1 hour in 12 hours. Class A2.

Weights and Dimensions

Weights: kg (lb) Dimensions: mm (in)

Net (+ lube oil) 396 (873) Length 1320 (52.0)

Wet (+ lube oil & coolant) 402 (886) Width 552 (21.7)
Fuel, lube oil & coolant 440 (970) Height 1258 (49.5)

General Data
Documents Generating Set Standards Warranty
A full set of operation and maintenance The equipment meets the following standards: All equipment carries full manufacturer's
manuals, circuit wiring diagrams, and BS5000, ISO 8528, ISO 3046, IEC 60034, warranty. Extended warranty terms available.
commissioning/fault finding instruction VDE 0530, NEMA MG-1.22. For details on warranty cover please contact
leaflets. your local dealer, or visit our website:
FG Wilson is a fully accredited ISO 9001 www.FGWilson.com
company.

In line with our policy of continuous product development, we reserve the right to change specification without notice. P10P2S / P11E2S/4PP/0406/GB