GEH275-2

Diesel Generator Set

Exclusively from your Caterpillar® dealer

Output Ratings

Generating Set Model Prime* Standby*

380-415V,50Hz 250.0 kVA 275.0 kVA

200.0 kW 220.0 kW

220/127V, 60 Hz - -
- -

* Refer to ratings definitions on page 4.

Ratings at 0.8 power factor.

Technical Data
Engine Make & Model: Perkins 1306C-E87TAG6

Alternator Model: LL5014J

Base Frame Type: Heavy Duty Fabricated Steel

Circuit Breaker Type: 3 Pole MCCB

Frequency: 50 Hz 60 Hz

Engine Speed: RPM 1500 -

Fuel Tank Capacity: litres (US gal) 350 (92.5)

Fuel Consumption, Prime: l/hr (US gal/hr) 58.9 (15.6) -

Fuel Consumption, Standby : l/hr (US gal/hr) 63.3 (16.7) -

Engine Techncial Data
Physical Data Lubrication system
Manufacturer: Perkins Oil Filter Type: Spin-On, Full Flow
Model: 1306C-E87TAG6 Total Oil Capacity l (US gal): 26.4 (7.0)
No. of Cylinders/Alignment: 6 / In Line Oil Pan l (US gal): 22.7 (6.0)
Cycle: 4 Stroke Oil Type: API-CH-4
Induction: Turbocharged Air To Air Cooling Method: Water
Charge Cooled

Cooling Method: Water

Governing Type: Electronic Performance 50 Hz 60 Hz
Governing Class: ISO 8528 G2
Engine Speed: RPM 1500 -
Compression Ratio: 16.9:1
Gross Engine Power: kW (hp)
Displacement: l (cu.in) 8.7 (530.9)
-Standby: 250.9 (336.0) -
Bore/Stroke: mm (in) 116.6 (4.6)/135.9 (5.4)
-Prime: 228.5 (306.0) -
Moment of Inertia: kg m² (lb. in²) 1.54 (5266)
BMEP: kPa (psi)
Engine Electrical System: -Standby: 2306.0 (334.4) -
-Voltage/Ground: 24/Negative -Prime: 2099.0 (304.5) -
-Battery Charger Amps: 45 Regenerative Power: kW 20.8 -
Weight: kg (lb) - Dry: 671 (1479)
- Wet: 698 (1539)
Fuel System
Fuel Filter Type: Replaceable Element
Air System 50 Hz 60 Hz Recommended Fuel: Class A2 Diesel
Fuel Consumption: l/hr (US gal/hr)
Air Filter Type: Paper Element
110% 100% 75% 50%
Combustion Air Flow:
Load Load Load Load
m³/min (cfm) -Standby: 16.4 (579) -
Prime
-Prime: 16.4 (579) -
50 Hz 63.3 (16.7) 58.9 (15.6) 46.1 (12.2) 31.1 (8.2)
Max. Combustion Air Intake
60 Hz - - - -
Restriction: kPa (in H2O) 6.2 (25.0) -
Radiator Cooling Air Flow:
Standby
m³/min (cfm) 424.2 (14980) -
50 Hz 63.3 (16.7) 50.2 (13.3) 34.3 (9.1)
External Restriction to
60 Hz - - -
Cooling Air Flow: Pa (in H2O) 125 (0.5) -
(based on diesel fuel with a specific gravity of 0.85 and conforming to
BS2869, Class A2)

Cooling System 50 Hz 60 Hz Exhaust System 50 Hz 60 Hz

Cooling System Capacity: Silencer Type: Level 1
l (US gal) 45.3 (12.0) - Silencer Noise Reduction SD100 (0)
Water Pump Type: Centrifugal Pressure Drop Across
Heat Rejected to Water & Silencer System: kPa (in Hg) 8.70 (2.569) -
Lube Oil: kW (Btu/min) Silencer Noise Reduction
-Standby: 110.0 (6256) - Level: dB 12 -
-Prime: 103.0 (5858) - Max. Allowable Back
Heat Radiation to Room: Pressure: kPa (in. Hg) 10.7 (3.2) -
kW (Btu/min) -Standby: 44.0 (2502) - Exhaust Gas Flow:
-Prime: 40.0 (2275) - m³/min (cfm) -Standby: 44.5 (1572) -
Radiator Fan Load: kW (hp) 10.3 (13.8) - -Prime: 44.5 (1572) -
Exhaust Gas Temperature: °C (°F)
m³/min (cfm) -Standby: 528 (982) -
Cooling system designed to operate in ambient conditions up to 50°C -Prime: 500 (932) -
(122°F). Contact your local Olympian dealer for power ratings at specific
site conditions.

Consult your Olympian representative for more information

Alternator Performance Data
50 Hz 60 Hz
Data Item 415/240V 400/230V 380/220V 220/127V
230/115V 220/110V
200/115V

Motor Starting
Capability* kVA 623 585 536 686 - - - - -

Short Circuit
Capacity** % 300 300 300 300 300 300 300 300 300

Reactances:
Per Unit

Xd 2.446 2.633 2.917 2.176 - - - - -

X'd 0.112 0.120 0.133 0.100 - - - - -

X''d 0.067 0.072 0.080 0.059 - - - - -

Reactances shown are applicable to standby ratings.

* Based on 30% voltage dip. Improved motor starting capability is available with optional Permanent Magnet generator or AREP excitation.
** With optional Permanent Magnet generator or AREP excitation.

Alternator Technical Data

Physical Data Operating Data

Manufacturer: OLYMPIAN Overspeed: RPM 2250

Model: LL5014J Voltage Regulation (steady state) (% ): +/- 0.5

No. of Bearings: 1 Wave Form NEMA = TIF: 50

Insulation Class: H Wave Form IEC = THF: 2.0%

Winding Pitch - Code: 2/3 - 6 Total Harmonic Content LL/LN: 4.0%

Supression is in line with European

Wires: 12 Radio Interference: Standard EN61000-6

Ingress Protection Rating: IP23 Radiant Heat: kW (Btu/min)

Excitation System: -50 Hz: 16.3 (927)

SHUNT

-60 Hz: -
AVR Model: R448

Consult your Olympian representative for more information

-

Technical Data
3 Phase Ratings and Performance at 50 Hz, 1500 RPM 3 Phase Ratings and Performance at 60 Hz, 1500 RPM

Voltage Prime Standby Voltage Prime Standby

kVA kW kVA kW kVA kW kVA kW
415/240V 250.0 200.0 275.0 220.0
400/230V 250.0 200.0 275.0 220.0
380/220V 250.0 200.0 275.0 220.0
230/115V 250.0 200.0 275.0 220.0
220/127V 250.0 200.0 275.0 220.0
220/110V 250.0 200.0 275.0 220.0
200/115V 250.0 200.0 275.0 220.0

Weights & Dimensions

Weights: kg (lb) Dimensions: mm (in)
Net (+ lube oil) 2215 (4883) Length 2960 (116.5)
Wet (+ lube oil & coolant) 2252 (4965) Width 1003 (39.5)
Fuel, lube oil & coolant 2548 (5617) Height 1718 (67.6)

Note: General configuration not to be used

for installation. See general dimension
drawings for detail.

Definitions General Data

Standby Rating Documents
These ratings are applicable for supplying continuous electrical Operation and maintenance manuals provided.
power (at variable load) in the event of a utility power failure. No Wiring diagrams included.
overload is permitted on these ratings. The alternator on this model
is peak continuous rated (as defined in ISO 8528-3).
Quality Standards
BS4999, BS5000, BSEN60034, BSEN61000, IEC60034.
Prime Rating
These ratings are applicable for supplying continuous electrical
power (at variable load) in lieu of commercially purchased power.
There is no limitation to the annual hours of operation and this Warranty
model can supply 10% overload power for 1 hour in 12 hours. All equipment carried full manufacturer's warranty.

Standard Reference Conditions

Note: Standard reference conditions 27°C (80°F) air Inlet Temp,
152.4m (500ft) A.S.L. 60% relative humidity. Fuel consumption
data at full laod with diesel fuel with spedcific gravity of 0.85 and
conforming to BS2869: 1998, Class A2.

Information contained in this publication may be considered confidential. www.CAT-ElectricPower.com

Discretion is recommended when distributing.
Materials and specifications are subject to change without notice. © 2008 Caterpillar
Market: International
CAT, CATERPILLAR, OLYMPIAN, their respective logos and ''Caterpillar Yellow'', as well as corporate and product All rights reserved.
LEHF7209-01 Printed in U.S.A.
identity used herein, are trademarks of Caterpillar and may not be used without permission.