Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
5 views

The only code

Uploaded by

h210595v
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
5 views

The only code

Uploaded by

h210595v
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 5

#include <built_in.

h>

// Define pins for LCD

sbit LCD_RS at RB0_bit;

sbit LCD_EN at RB1_bit;

sbit LCD_D4 at RB2_bit;

sbit LCD_D5 at RB3_bit;

sbit LCD_D6 at RB4_bit;

sbit LCD_D7 at RB5_bit;

sbit LCD_RS_Direction at TRISB0_bit;

sbit LCD_EN_Direction at TRISB1_bit;

sbit LCD_D4_Direction at TRISB2_bit;

sbit LCD_D5_Direction at TRISB3_bit;

sbit LCD_D6_Direction at TRISB4_bit;

sbit LCD_D7_Direction at TRISB5_bit;

// Relay control pins

sbit Heater_Relay at RC0_bit;

sbit Fan_Relay at RC1_bit;

// Function prototypes

float readTemperature();

void displayData(float temperature, float humidity);

void DHT11_Start();
unsigned char DHT11_Read();

void main() {

float temperature, humidity;

// Initialize LCD

Lcd_Init();

Lcd_Cmd(_LCD_CLEAR);

Lcd_Cmd(_LCD_CURSOR_OFF);

// Set relay pins as output

TRISC0_bit = 0; // Heater relay

TRISC1_bit = 0; // Fan relay

while(1) {

// Read temperature from LM35

temperature = readTemperature();

// Read humidity from DHT11

humidity = DHT11_Read();

// Control heater and fan based on temperature

if (temperature < 32.0) { // Set your desired temperature

Heater_Relay = 1; // Turn on heater

Fan_Relay = 0; // Turn off fan


} else if (temperature > 34.0) {

Heater_Relay = 0; // Turn off heater

Fan_Relay = 1; // Turn on fan

} else {

Heater_Relay = 0; // Turn off heater

Fan_Relay = 0; // Turn off fan

// Display data on LCD

displayData(temperature, humidity);

Delay_ms(1000); // Delay for stability

float readTemperature() {

// Read temperature from LM35

int adcValue = ADC_Read(0); // Assuming LM35 is connected to AN0

return adcValue * (5.0 / 1023.0) * 100; // Convert ADC value to temperature

void displayData(float temperature, float humidity) {

char txt[16];

Lcd_Out(1, 1, "Temp: ");


FloatToStr(temperature, txt);

Lcd_Out(1, 7, txt);

Lcd_Chr(1, 13, 223); // Degree symbol

Lcd_Chr(1, 14, 'C');

Lcd_Out(2, 1, "Humidity: ");

IntToStr((int)humidity, txt);

Lcd_Out(2, 10, txt);

Lcd_Chr(2, 12, '%');

void DHT11_Start() {

TRISD0_bit = 0; // Set pin as output

RD0_bit = 0; // Pull pin low

Delay_ms(18); // Wait for 18 ms

RD0_bit = 1; // Pull pin high

Delay_us(20); // Wait for 20 us

TRISD0_bit = 1; // Set pin as input

unsigned char DHT11_Read() {

unsigned char i, j, data[5] = {0, 0, 0, 0, 0};

DHT11_Start(); // Start signal


// Wait for response

while (RD0_bit); // Wait for pin to go low

while (!RD0_bit); // Wait for pin to go high

// Read 40 bits of data

for (j = 0; j < 5; j++) {

for (i = 0; i < 8; i++) {

while (!RD0_bit); // Wait for pin to go high

Delay_us(30); // Wait

You might also like