Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 3 views

    LDL101-00_EN-GB (1)

    Uploaded by

    Rahaf Alazzeh

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    LDL101-00_EN-GB (1)

    Uploaded by

    Rahaf Alazzeh
    3 views4 pages

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    3 views4 pages

    LDL101-00_EN-GB (1)

    Uploaded by

    Rahaf Alazzeh

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    LDL101

    Conductive conductivity sensor


    COND CONDUCTIVITY UPW HYG G1/2

    Digital meets analogue: integrating modern IO-Link sensors the analogue way. The EIO104 allows
    you to realise two analogue signals from intelligent IO-Link sensors with several process values.

    1 Gasket FKM (for sealing on the back - not pressure resistant) / removable
    2 pre-mounted PEEK sealing ring (removable) / metallic sealing area
    3 groove for sealing ring DIN 3869-21

    Product characteristics
    Number of inputs and outputs Number of analogue outputs: 1
    Process connection threaded connection G 1/2 external thread sealing cone
    optional:hygienic PEEK gasket according to EHEDG
    Application
    Special feature Gold-plated contacts
    Media conductive liquids
    Note on media ultra-pure water
    Cannot be used for See the operating instructions, chapter "Function and features".
    Medium temperature [°C] -25...100; (< 1 h: 150)
    Pressure rating [bar] 16
    Vacuum resistance [mbar] -1000
    Electrical data
    Operating voltage [V] 18...30 DC
    Current consumption [mA] < 60
    Protection class III
    Reverse polarity protection yes
    Power-on delay time [s] 2
    Measuring principle konduktiv
    Inputs / outputs
    Number of inputs and outputs Number of analogue outputs: 1
    Outputs
    Total number of outputs 1
    Output signal analogue signal; IO-Link

    ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — LDL101-00 — 13.04.2023 —
    LDL101
    Conductive conductivity sensor
    COND CONDUCTIVITY UPW HYG G1/2

    Output function analogue output; scalable; selectable conductivity / temperature


    Number of analogue outputs 1
    Analogue current output [mA] 4...20
    Max. load [Ω] 500
    Measuring/setting range
    Conductivity measurement
    Measuring range [µS/cm] 0.04...1000
    Temperature measurement
    Measuring range [°C] -25...150
    Accuracy / deviations
    Conductivity measurement
    Accuracy (in the measuring
    3 % MW ± 0,03 µS/cm
    range)
    Resolution [µS/cm] 0,001 (0...9,999)
    0,01 (10…99,99)
    0,1 (100…1000)
    Drift [%/K] 0,1 %/K MW
    Repeatability 1 % MW ± 0,010 µS/cm
    Long-term stability 1,5 % MW ± 0,015 µS/cm
    Temperature measurement
    Accuracy [K] 20...50 °C: < ± 0,5 K;
    -25...150 °C: < ± 1,5 K
    Repeatability [K] 0,2
    Resolution [K] 0.1
    Response times
    Conductivity measurement
    Response time [s] < 2; (T09; Damping = 0)
    Temperature measurement
    Response time [s] < 9; (T09)
    Interfaces
    Communication interface IO-Link
    Transmission type COM2 (38,4 kBaud)
    IO-Link revision 1.1
    SDCI standard IEC 61131-9
    Profiles Measuring Sensor, Identification and Diagnosis
    SIO mode no
    Required master port type A
    Process data analogue 1
    Min. process cycle time [ms] 5.6
    Supported DeviceIDs Type of operation DeviceID
    Default 1455
    Operating conditions
    Ambient temperature [°C] -40...60
    Storage temperature [°C] -40...85
    ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — LDL101-00 — 13.04.2023 —
    LDL101
    Conductive conductivity sensor
    COND CONDUCTIVITY UPW HYG G1/2

    Protection IP 68; IP 69K; (7 days / 3 m water depth / 0.3 bar: IP 68)


    Tests / approvals
    EMC DIN EN 61000-6-2
    DIN EN 61000-6-3
    Shock resistance DIN EN 60068-2-27 50 g (11 ms)
    Vibration resistance DIN EN 60068-2-6 20 g (10...2000 Hz)
    MTTF [years] 173
    Mechanical data
    Weight [g] 329.9
    Materials stainless steel (1.4404 / 316L); PEI; FKM
    Materials (wetted parts) stainless steel (1.4435 / 316L); PEEK
    Process connection threaded connection G 1/2 external thread sealing cone
    optional:hygienic PEEK gasket according to EHEDG
    Remarks
    Remarks MW = measured value
    Notes Digital meets analogue: integrating modern IO-Link sensors the
    analogue way. The EIO104 allows you to realise two analogue
    signals from intelligent IO-Link sensors with several process values.
    Pack quantity 1 pcs.
    Electrical connection
    Connector: 1 x M12 (EN 61067-2-101); coding: A; Contacts: gold-plated

    ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — LDL101-00 — 13.04.2023 —
    LDL101
    Conductive conductivity sensor
    COND CONDUCTIVITY UPW HYG G1/2

    Connection

    OUT1 IO-Link
    OUT2 analogue output
    colours to DIN EN 60947-5-2
    Core colours :
    BK = black
    BN = brown
    BU = blue
    WH = white

    ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — LDL101-00 — 13.04.2023 —

    You might also like