CSS

REPUBLIC OF THE PHILIPPINES
Department of Education
Region V
Division of Sorsogon
GUBAT NATIONAL HIGH SCHOOL
Gubat, Sorsogon
COMPUTER SYSTEM SERVICING

1st Quarterly Examination
First Semester 2019-2020
Name: ________________________________________________________________ Score: ________
TEST I – Multiple Choice: Choose the letter of the correct answer. Write your answer on the
space provided before each number.
1. Software that is designed to help the user perform singular or multiple related tasks, examples are
Word Processing, Spreasheet and Graphics.
a. System Software
b. Application Software
c. People Ware
d. Hardware
2. Is the physical equipment that implements the data processing so that useful information may come as
a result.
a. System Software
b. Application Software
c. People Ware
d. Hardware
3. It serves as the brain of computer.
a. Mouse c. HDD
b. Motherboard d. CPU
4. The main circuit board of a computer.

a. Mouse c. HDD
b. Motherboard d. CPU
5. Which of the following is an example of Primary Storage?
a. DVD c. ROM
b. Flash Memory d. BD
6. It is installed in the back corner of the PC Case that converts 120VAC into DC voltages.
a. HDD c. ROM
b. USB d. PSU
7. Used to drive or fasten positive slotted screws.
a. Flat Head Screw Driver c. Long Nose Plier
b. Philips Screw Driver d. Anti-Static Wrist Strap
8. Power Supply Unit is located at
a. A c. C C. E. A.
b. B d. D
9. Hard Drive Tray is located at
a. A c. C D.
b. B d. D
B.
10. CD / DVD Drive Tray is located at
a. A c. C
b. B d. D
F. G.
11. Refer to the female part of connection that are used to connect a monitor, webcam, speakers or other
peripheral devices.
a. Drive Bay c. Power Supply
b. Ports d. Cord
The figure illustrates what type of port?
a. Power Port c. Serial Port
b. PS/2 Port d. Parallel Port
12. The simple, 6-pin, low-speed serial connections dedicated to a keyboard and mouse.
a. Power Port c. Serial Port

b. PS/2 Port d. Parallel Port
13. Intended for plugging in the speaker or headset.
a. Power Port
b. PS/2 Port
c. VGA Port
d. Audio Port
14. The monitor jack which is intended for the VGA Port.
c.
a.
c.
b.
15. Contains a program or code that helps the processor to interact and control the other components in
the computer.
a. CMOS Storage Chip c. Northbridge Interface
b. BIOS Chip d. Southbridge Interface
16. Allows the user to modify the date, time and sets the loading procedure when the computer starts.
a. CMOS Storage Chip c. Northbridge Interface
b. BIOS Chip d. Southbridge Interface
17. The CPU is located at

a. 1
b. 3
c. 5
d. 9
18. The 24-pin ATX power connector is located at

a. 2
b. 4
c. 6
d. 8
19. The 4-pin ATX power connector is located at

a. 8
b. 10
c. 12
d. 14
20. The first step in Personal Computer Disassembly is

a. Opening the outer shell / case c. Removing the power supply
b. Removing the system fan d. Unplugging
21. The first step in Personal Computer Assembly is
a. Prepare your Work Place c. Install the CPU
b. Prepare the Motherboard d. Install the Power Supply Unit
22. The last step in Connecting Peripherals of a PC is
a. Attached the monitor cable to the c. Plug the keyboard cable into the
video port keyboard port
b. Plug the USB cable into a USB d. Plug the power cable into the
port power supply
23. It is a planned system of working to prevent illness and injury in work place by recognizing and
identifying hazards and risks
a. Occupational Safety and Health
b. Uninterruptible Power Supply
c. Personal Protective Equipment
d. Liquid Crystal Display
24. Refers to protective clothing, helmets, goggles or other gear designed to protect the wearer’s body or
clothing from injury by electrical hazards, heat, chemicals, and infection or job-related occupational
safety and health purposes.
a. Occupational Safety and Health
b. Uninterruptible Power Supply
c. Personal Protective Equipment
d. Liquid Crystal Display
25. It is a garment worn over the front of the body as a protection for one’s cloth
a. Gloves
b. Goggles
c. Face Mask
d. Apron
26. Always grasp a __________ part of the computer chassis with your bare hand before you touch
anything inside.
a. Metal
b. Non-Metal
c. AC Power
d. ATX Power Supply
27. If you see a message to press any key to boot the CD and you failed to do so, what do you
think will happen?
a. The computer will load available bootable device
b. It will be prompted to BIOS setup
c. It will return to boot menu
d. Set up inspecting your system will appear
28. Temporary storage for data and programs that are being accessed by the CPU such as
BIOS and System log
a. BIOS
b. HDD
c. RAM
d. CPU
29. CMOS means _________________.
a. Current Metal Oxide Semi-conductor
b. Comprehensive Material on Shortage
c. Complementary Metal Oxide Semi-conductor
d. Comprehensive Material Oxide Semi-conductor
30. In Windows operating system, where can you modify or uninstall an installed program?
a. Disk management
b. Control Panel
c. Internet Browser
d. Windows Explorer
31. These are wearables that can keep us or devices away from injuries or damages.
a. Personal Protective Equipment
b. Safety Workplace Hazard
c. Contingency Plan
d. Emergency Plan
32. This PPE is designed to protect the workers from chemical and biological hazards while
working.
a. Face-mask
b. Safety goggles
c. Face-shield
d. Safety eye-glasses
33. This can be internal or external component of computer that is responsible in the
quality of visual output displayed by the monitor.
a. GPU
b. RAM
c. HDD
d. LAN card
Mang Kiko a certified computer technician is servicing a computer shop located
at Aranilla Compound Iba. Dupay. Can you help him finishing his job just by identifying the
tools, materials and components he needs? Choose your answer from the letter of choices
below:
A. Multi-meter C. Power Supply Unit
B. Monitor D. RAM
Before Mang Kiko works with electrical component, he wears the anti-static wrist strap
to protect him from electric surge. He plugins the power cord to the wall outlet and power-on
the PC but the PC won’t boot. So, he used the 35. ______________________ to know if the
wall outlet is working. It seems, the wall outlet is working so, he checked the physical
connection and firmly pushed the 20-pin and 4-pin 12 volts of the 36. ____________________
The PC boots but no display on the 37. ____________________. He turned off again the PC
and checks the 38. ___________________ if properly inserted with two lock-notches side by
side. He turned-on again the PC and it started smoothly.
39. Which tool is used to blow away dust and debris from different computer parts without touching the
component?
a. Anti-static Mat c. Compressed Air
b. Lint-free Cloth d. Paint Brush
40. Which tool is used to loosen or tighten slotted screws?
a. Torx Screwdriver c. Philips head Screwdriver
b. Hex Driver d. Flat head Screwdriver
41. Which tool is used for hardware to stand on to prevent static electricity from building up?
a. Anti-static mat c. Philips Head Screwdriver
b. Hex Driver d. Wire Cutter
42. Which tool is sometimes called a nut driver? It is used to tighten nuts in the same way that a
screwdriver tighten screws.
a. Torx Screwdriver c. Philips Head Screwdriver
b. Hex Driver d. Flat Screwdriver
43. Which tool is used to strip and cut wires?
a. Needle-Nose Plier c. Hex Driver
b. Wire Cutter d. Part Retriever
44. Which tool is used to clean different computer components without scratching or leaving debris?
a. Compressed Air c. Cable Ties
b. Lint-Free Cloth d. Paint Brush
45. Which tool is used to test the integrity of circuits and the quality of electricity in computer components
a. Loop Back Adapter c. Lint-Free Cloth
b. Anti-Static Wrist Strap d. Multimeter
46. Which tool is used to blow away dust and debris using its bristles?
a. Anti-static Mat c. Compressed Air
b. Lint-free Cloth d. Paint Brush
47. Which tool is used to loosen or tighten cross head screws?
48. Which tool is used to loosen or tighten screws that have a star-like depression on the top?
II. Direction: Rearrange the following procedures in their proper order. Use numbers to indicate their
order of precedence. Write your answer on the space provided
A. Personal Computer Disassembly (1 – 8)
____49. Detaching the Hard Drive
____50. Detaching the power supply
____51. Opening the outer shell / case
____52. Pull Out the Motherboard
____53. Removing the CD / DVD Drives
____54. Removing the CPU fan
____55. Removing the system fan
____56. Unplugging all the cables and wires
B. Personal Computer Assembly ( 1- 10)
____57. Connect the Power Supply
____58. Install Graphics / Video Cards
____59. Install Internal Drives
____60. Install Memory (RAM Modules)
____61. Install the Add- in Cards
____62. Install the CPU
____63. Install the CPU Heat Sink
____64. Place the motherboard into the case
____65. Prepare the Motherboard
____66. Prepare your workplace

CSS

Uploaded by

Copyright:

Available Formats

CSS

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

CSS

Uploaded by

Copyright:

Available Formats

REPUBLIC OF THE PHILIPPINES

COMPUTER SYSTEM SERVICING

4. The main circuit board of a computer.

a. Power Port c. Serial Port

17. The CPU is located at

18. The 24-pin ATX power connector is located at

19. The 4-pin ATX power connector is located at

20. The first step in Personal Computer Disassembly is

You might also like