Huawei.H12-811.v2024-10-07.q356

Huawei.H12-811.v2024-10-07.
q356
Exam Code: H12-811

Exam Name: HCIA-Datacom V1.0
Certification Provider: Huawei
Free Question Number: 356
Version: v2024-10-07
# of views: 105
# of Questions views: 3570
https://www.freecram.net/torrent/Huawei.H12-811.v2024-10-07.q356.html
NEW QUESTION: 1
As shown in the figure below, host A and host B cannot communicate ()
A. False
B. True
Answer: (SHOW ANSWER)
NEW QUESTION: 2
As shown in the figure below. Router A has passed the IP address 10.0.12.2 Telnet Router B.
Which of the following operations on the current interface will cause the Telnet session between
Router A and Router B to be interrupted? () (Multiple Choice Questions)
A. Enable OSPF protocol under G0/0/1 interface

B. Configure static routing
C. Close G0/0/1 interface
D. Modify G0/0/1 interfaceIP address
NEW QUESTION: 3
Broadcast network. OSPF runs on four routers in the same area. Same network segment. OSPF
will automatically elect one DR and multiple BDRs to achieve better backup results
A. True
B. False
NEW QUESTION: 4
The network administrator of a certain company wants to uniformly divide the users who often
access the company network from different switches to VLAN 10 when they frequently change
office locations. Which of the following methods should be used to divide VLANs? ()
A. VLAN based on protocol
B. VLAN based on subnet
C. VLAN based on MAC. address
D. VLAN based on port
NEW QUESTION: 5
The host's IPv4 address is 200.200.200.201/30. Which of the following hosts has an IPv4 address
and its communication does not need to be forwarded by a router? ()
A. 200.200.200.203
B. 200.200.200.202
C. 200.200.200.200
D. 200.200.200.1
NEW QUESTION: 6
As shown in the figure below. Host A and Host B cannot communicate. ()(True or False)
A. False
B. True
NEW QUESTION: 7
The following statement about the TTL field in the IP packet header is correct. ()
A. Each time an IP packet passes through a router, its TTL value is increased by 1
B. Each time a P packet passes through a router, its TTL value will be reduced by 1
C. TTL defines the number of packets that the source host can send
D. TTL defines the time interval at which the source host can send data packets
NEW QUESTION: 8
The DHCPv6 server supports the provision of other configuration information such as DNS server
addresses for the host. ()
A. False
B. True
NEW QUESTION: 9
The HybriD. port can be connected to the user host or other switches. ()
A. True
B. False
NEW QUESTION: 10
A. The label is used to uniquely identify the forwarding equivalence class FEC to which a packet
belongs
B. The label is encapsulated between the network layer and the transport layer
C. The label is carried by the header of the message and does not contain the
topologyinformation.
D. The tag is a short identifier with a fixed length. It only has a local meaning
NEW QUESTION: 11
For the description of the PPP link establishment process, the following statement is wrong ()
A. In the Network phase, the PPP link performs NCP negotiation. Select and configure a network
layer protocol through NCP negotiation, E.PPP link supports half-duplex and full-duplex modes
B. In the Establish phase, the PPP link performs LCP parameter negotiation. The negotiation
content includes the maximum receiving unit MRU, authentication method magic word and other
options
C. After the NCP negotiation is successful, the PPP link will maintain the communication state
and enter the Terminate phase
D. The Dead phase is also called the physical layer unavailable phase. When both ends of the
communication parties detect that the physical circuit is activated, they will migrate from the Dead
phase to the Establish phase, which is the link establishment phase.
Answer: C (LEAVE A REPLY)
NEW QUESTION: 12
In the MAC address table of the switch, which of the following entries will not age?
A. Port MAC address table entry
B. Static MAC address table entry
C. Device MAC address table entry
D. Dynamic MAC address table entry
NEW QUESTION: 13
Which fields in the IPv4 header are related to fragmentation? ()*
A. Flags
B. Fragment Offset
C. Identification
D. TTL
NEW QUESTION: 14
Which of the following does not include the advantages of Wi-Fi6 compared to Wi-Fi5? ()
A. Higher bandwidth
B. Lower transmission delay
C. Higher number of access terminals per AP
D. Higher power consumption
Answer: D (LEAVE A REPLY)
NEW QUESTION: 15
On Huawei ARG3 series routers, what authentication modes does AAA support? ()
A. 802.1x
B. None
C. Local
D. HWTACACS
NEW QUESTION: 16
The network structure and OSPF partition are shown in the figure. Except for RTA in the figure,
the routers RTB, RTC and RTD are all ABR routers. ()(True or False)
A. False
B. True
Valid H12-811 Dumps shared by ExamDiscuss.com for Helping Passing H12-811 Exam!
ExamDiscuss.com now offer the newest H12-811 exam dumps, the ExamDiscuss.com
H12-811 exam questions have been updated and answers have been corrected get the
newest ExamDiscuss.com H12-811 dumps with Test Engine here:
https://www.examdiscuss.com/Huawei/exam/H12-811/premium/ (732 Q&As Dumps, 35%OFF
Special Discount Code: freecram)
NEW QUESTION: 17
The network shown in the figure below. Host A is not configured with a gateway, and Host B has
the ARP cache of the gateway. Which of the following statements are correct? () (Multiple Choice
Question) The answer describes the address wrong
A. Enable proxy ARP on port G0/0/1 of the router,Then host A can communicate with host B
B. Host A and Host B cannot communicate in both directions
C. The data packet sent by host B with the destination P address of 10.0.12.1 can be forwarded
to host A
D. The data packet sent by host A with the destination P address 10.0.12.1 (this address is
changed to 11.0.12.1) can be forwarded to host B
NEW QUESTION: 18
The mac address of the existing switch is shown in the figure. Which of the following statements
is correct ()? (Multiple Choice Questions)
A. The source mac address learned from the port is 5489-9811-0b49. The data frame with the
destination mac address 5489-989d-1d30 is forwarded from the Eth0/0/2 port
B. When the switch restarts, the mac address learned by port Eth0/0/3 needs to be re-learned
C. When the switch restarts, the mac address learned by port Eth0/0/2 does not need to be
relearned
D. The data frame with the source mac address of 5489-9885-18a8 and the destination mac
address of 5489-989d-1d30 learned from the port is forwarded from the Eth0/0/1 port
NEW QUESTION: 19
A company applies for a C. address segment, which needs to be evenly distributed to 8
subsidiaries. The largest subsidiary has 14 computers. Different subsidiaries must be in different
network segments. The subnet mask should be designed as ( )
A. 255.255.255.192
B. 255.255.255.0
C. 255.255.255.128
D. 255.255.255.240
NEW QUESTION: 20
A. False
B. True
NEW QUESTION: 21
The network is shown in the figure below. The following statementcorrectIs there? () (Multiple
Choice Questions)
A. Host A and Host B cannot ping through

B. Host B and Host C can ping through
C. All hosts can ping each other
D. Host A and Host c can ping through
NEW QUESTION: 22
Regarding the configuration shown in the figure, which statement is correct? () (Single-choice
question)
A. After the above configuration is completed, the history command buffer can store 20 bytes of
commands
B. The default size of the history command cache is 5 bytes
C. The default size of the history command cache is 5
D. history-command max-size20 is to adjust the size of the history named cache to 20
NEW QUESTION: 23
In the network shown in the figure, which of the following descriptions is correct? () (Multiple
Choice Questions)
A. The network between SWA and SWB is the same broadcast domain
B. The network between SWA and SWC is the same conflict domain
C. The network between SWA and SWC is the same broadcast domain
D. The network between RTA and SWC is the same conflict domain
Answer: B,C (LEAVE A REPLY)
NEW QUESTION: 24
As shown in the figure, there are three data packets captured by the administrator on the network.
Which of the following statements is incorrect? (Single choice question) Source destination
protocol info SYNseq0win8192Len0mss146010.0.12.2 10.0.12.1
10.0.12.110.0.12.2TCp50190>telnet
SYN, ACKseg-0 Ack-1 win-8192 Len-0mss=1460
TCP telnet:50190
10.0.12.110.0.12.2 TCP50190>telnet(ACK)seq-1Ack=1win=81921en=0
A. The telnet client uses port 50190 to establish a connection with the server
B. These three data packets represent the three-way handshake process of TCP
C. None of these three data packets contain application layer data
D. The IP address of the telnet server is 10.0.12.1. The IP address of the telnet client is 10.0.12.2
NEW QUESTION: 25
For switches running the STP protocol, the port needs to wait for the forwarding delay in the
Learning state to transform into the Forwarding state. ()
A. True
B. False
Answer: B (LEAVE A REPLY)
NEW QUESTION: 26
As shown in the figure, if the command ping 10.1.1.2 is executed on R1, the data frame of VLAN
10 received from LSW2 by LSW1 is tagged. ()(True or False)
A. False
B. True
NEW QUESTION: 27
Which of the following descriptions about the 0SPF area is correct ()*
A. The number of the backbone area cannot be 2
B. Before configuring the OSPF area, you must configure an IP address for the loopback
interface of the router
C. All networks should be declared in zone 0
D. The number range of the area is from 0.0.0.0 to 255.255.255.255
NEW QUESTION: 28
In the figure below, all switches have enabled the STP protocol, assuming that the path cost
value of all ports is 200. What is the root path cost value contained in the configuration BPDU
message received by the G0/0/4 port of $WD? () (Single-choice question)
A. 400
B. 0
C. 200
D. 600
NEW QUESTION: 29
The FIT AP can obtain the IP address of AC. through the DHCP Option to establish a CAPWAP
tunnel. Which Option needs to be configured on the DHCP server for this? ()
A. Option 82
B. Option 43
C. Option 55
D. Option 10
NEW QUESTION: 30
A. False
B. True
NEW QUESTION: 31
Which information of the data frame is used by the interface to determine whether to forward
Layer 2 or Layer 3 forwarding? ()
A. Source MAC
B. Source IP
C. Destination port
D. Destination MAC
NEW QUESTION: 32
The output information of the router R1 routing table is shown in the figure. Which of the following
statements is correct? () (Multiple Choice Questions) R1display ip routing-table Route Flags: R-
relay, D-download to fib
A. The router will discard packets whose destination network is 11.0.0.0/8

B. The data packet whose destination network is 11.0.0.0/8 will be forwarded from the router's
GigabitEthernet0/0/0 interface
C. The router will forward data packets whose destination network is 12.0.0.0/8
D. The data packet whose destination network is 12.0.0.0/8 will be forwarded from the router's
Ethernet0/0/0 interface
NEW QUESTION: 33
The MAC address table of a certain switch is shown in the figure. If the switch receives a data
frame with a destination MAC of 5489-9811-0b49 from port Eth0/0/2, which of the following
statements is correct? ()
A. Forward this data frame from the Eth0/0/2 port

B. Discard this data frame
C. Flood out this data frame
D. Forward this data frame from the Eth0/0/3 port
NEW QUESTION: 34
UDP cannot guarantee the reliability of data transmission, and does not provide functions such as
message sequencing and flow control. It is suitable for flows that do not require high transmission
reliability, but require high transmission speed and delay ().
A. True
B. False
NEW QUESTION: 35
UDP is connectionless and must rely on () to ensure the reliability of transmission.
A. Internet Protocol
B. Application layer protocol
C. Network layer protocol
D. Transmission Control Protocol
NEW QUESTION: 36
When using the SNMPv1 protocol to manage network devices, which of the following commands
is used by the network management system to complete the configuration of the network
devices? ()
A. Response
B. Get-Request
C. Set Request
D. Get-Next Request
NEW QUESTION: 37
The administrator plans to implement route backup by configuring static floating routes, the
correct way to achieve this is ().
A. The administrator only needs to configure two static routes
B. The administrator needs to configure different metric values for the main static route and the
standby static route. The administrator only needs to configure two static routes
C. The administrator only needs to configure two static routes
D. The administrator needs to configure different protocol priority values for the main static route
and the standby static route
NEW QUESTION: 38
DNS is used for domain name resolution
A. False
B. True
NEW QUESTION: 39
In the MAC address table of the switch, which of the following entries will not age? ()
A. Port MAC. Address table entry
B. Static MAC. Address table entry
C. Dynamic MAC. Address table entry
D. Device MAC. Address table entry
NEW QUESTION: 40
Refer to the configuration of the single-arm routing in the figure below, you can judge that even if
the ARP proxy is not enabled on the sub-interface of R1,The administrative department and the
financial department can also visit each other. ()(True or False)
A. False
B. True
NEW QUESTION: 41
As shown in the figure below. All switches enable the $P protocol and keep other configurations
in their default state. When the network is stable, are the following statements correct? () (Multiple
Choice Questions)
A. SWA is the root bridge in this network

B. Both ports of SWB are in Forwarding state
C. SWB is the root bridge in this network
D. Both ports of SWC are in Forwarding state
NEW QUESTION: 42
Which frequencies does IEEE802.11n support? ()
A. 6GHz
B. 5GHz
C. 2.4GHz
D. 2.5GHz
NEW QUESTION: 43
RTA. Uses NAT technology and realizes many-to-many NAPT address translation by defining an
address pool, so that hosts in the private network can access the public network. Assuming that
there are only two public network P addresses in the address pool, and they have been assigned
to hosts A and B for address conversion, and at this time, if the host also wants to access the
public network, the following description is correct ().
A. RTA. Assign interface address (200.10.10.3) to host C. Host C can access the public network
B. RTA. Convert the source port of host C., the host can access the public network
C. All hosts can access the public network by using the public network address in turn
D. HostC.Unable to assign a public network address, and cannot access the public network
NEW QUESTION: 44
Which field of the Pv6 packet header can be used for Q0s? ()
A. PayloaD Length
B. TraffiC Class
C. Version
D. Next Header
NEW QUESTION: 45
The output information of a certain router is shown in the figure. Which of the following statements
are correct? () (Multiple Choice Questions)
A. The interface address of this router is 10.0.12.2

B. The Router ID of the router is 10.0.2.2.
C. This router is DR
D. The Router ID of the router is 10.0.1.1
NEW QUESTION: 46
Use the ACL shown in the figure on the router RTA to match routing entries. Then which of the
following entries will be matched?
(RTA) acl 2002
(RTA-acl-basic-2002) rule deny source 172.16.1.1 0.0.0.0
(RTA-acl-basic-2002) rule deny source 172.16.0.0 0.255.0.0
A. 172.16.1.0/24
B. 172.18.0.0/16
C. 172.16.1.1/24
D. 192.17.0.0/24
NEW QUESTION: 47
In the broadcast network, OSPF runs on four routers in the same area and on the same network
segment. OSPF will automatically elect one DR and multiple BDRs to achieve a better backup
effect ()
A. True
B. False
NEW QUESTION: 48
The information shown in the figure is the port status information displayed on a switch running
STP. According to this information, what is wrong in the following description? () (Single-choice
question)
A. This switch may be connected to 6 other switches
B. This switch is the root switch in the network
C. This network may only contain this switch
D. The priority of this switch is 0
NEW QUESTION: 49
What is the length of the basic IPv6 header in bytes? ()
A. 40
B. 32
C. 64
D. 48
NEW QUESTION: 50
A. Multicast address
B. Broadcast address
C. Anycast address
D. Unicast address
NEW QUESTION: 51
Which of the following parameters is used in LCP negotiation to detect link loops and other
abnormal conditions? ()
A. Magic word
B. PAP
C. CHAP
D. MRU
NEW QUESTION: 52
In the network shown in the figure below, the router receives a data packet with a destination IP
address of 11.0.12.1 from hostA. This data packet is forwarded by the router.
What are the destination mc and destination IP? () (Single-choice question)
A. MAC-B11.0.12.1
B. MAC-C11.0.12.1
C. MAC-D10.0.12.2
D. MAC-D11.0.12.1
NEW QUESTION: 53
The network shown in the figure below. Two switches are connected by four links. COPPER
refers to electrical interface and FIBER refers to optical interface. Then which two interfaces can
realize link aggregation? () (Single-choice question)
A. G0/0/3 and G0/0/2

B. G0/0/3 and FE0/0/3
C. G0/0/2 and FE0/0/3
D. G0/0/2 and G0/0/1
NEW QUESTION: 54
Which parameter is used in the spanning tree protocol for root bridge election? ()
A. Bridge priority
B. Root path cost
C. Port ID
D. Bridge ID
NEW QUESTION: 55
The load sharing mode at both ends of the Eth-Trunk can be inconsistent ()
A. False
B. True
NEW QUESTION: 56
Which of the following information is not included in the MAC address table of the switch? ()
A. The port number
B. MAC.Address
C. VLAN
D. IP address
NEW QUESTION: 57
When the device running STP receives the RSTP configuration BPDU, it will discard it. ()
A. False
B. True
NEW QUESTION: 58
As shown in the figure below, all hosts can communicate normally. Is the correspondence
between the MAC address and the port in the MAC address table of SWB correct? () (Single-
choice question)
A. MAC-A GO/0/1
MAC-B GO/0/1
MAC-C GO/0/3
B. MAC-A GO/0/3
MAC-B GO/0/3
MAC-C GO/0/1
C. MAC-A GO/0/2
MAC-B G0/0/2
MAC-C GO/0/3
D. MAC-A GO/0/1
MAC-B GO/0/2
MAC-C GO/0/3
NEW QUESTION: 59
What is the total length of port ID in Spanning Tree Protocol? ()
A. 2
B. 4
C. 16
D. 8
NEW QUESTION: 60
A. Down
B. Attempt
C. 2-way
D. Full
NEW QUESTION: 61
Which category does the IPv6 address FE80:2E0:FCFF:FE6F:4F36 belong to? ()
A. Global semicast address
B. Anycast address
C. Link local address
D. Multicast address
NEW QUESTION: 62
Basic ACL number value range ().
A. 3000-3999
B. 2000-2999
C. 4000-4999
D. 1000-1999
NEW QUESTION: 63
How many more bytes are the packets using MPLS label double-layer nesting technology than
the original IP packets ()
A. 16
B. 32
C. 4
D. 8
NEW QUESTION: 64
Among the following commands for configuring the default route, the correct one is ()
A. (Huawei) ip route-statiC.0.0.0.0 0.0.0.0 0.0.0.0
B. (Huawei-Seria10) ip route-statiC.0.0.0.0 0.0.0.00.0.0.0
C. (Huawei) ip route-statiC.0.0.0.0 0.0.0.0 192.168.1.1
D. (Huawei) ip route-statiC.0.0.0.0 255.255.255.255192.168.1.1
NEW QUESTION: 65
The second layer switch belongs to the data link layer device, which can identify the MAC
address information in the data frame, forward data according to the MAC address, and record
these MAC addresses and corresponding port information in its own MAC address table. ()
A. False
B. True
NEW QUESTION: 66
Which packet type is used by network devices running the SNMPv1 protocol to actively send
alarm information? ()
A. Response
B. Get Request
C. Get-Next Request
D. Trap
NEW QUESTION: 67
The MAC address table of existing switches is shown in the figure. Which of the following
statements are correct? () (Single-choice question)
A. After the switch restarts, all MAC addresses need to be relearned. The MAC address
5489-9885-
18a8 is manually configured by the administrator
B. The MAC address 5489-989d-1d30 is manually configured by the administrator
C. The MAC address 5489-9811-0b49 is manually configured by the administrator
D. The MAC address 5489-9885-18a8 is manually configured by the administrator
NEW QUESTION: 68
In the campus network, the reliability of the network can be improved by using link aggregation
and stacking technology. ()
A. False
B. True
NEW QUESTION: 69
What is the total length of an IPv6 address in bits? ()
A. 64
B. 32
C. 96
D. 128
NEW QUESTION: 70
A. True
B. False
NEW QUESTION: 71
Which of the following message types does DHCP contain?
A. DHCP ROLLOVER
B. DHCP OFFER
C. DHCP REQUEST
D. DHCP DISCOVER
NEW QUESTION: 72
If the Length of an Ethernet data frame/Type = 0x8100, which of the following statements is
correct? ()
A. There must be a UDP header in the upper layer of this data frame
B. This data frame must carry VLAN TAG
C. There must be a TCP header in the upper layer of this data frame
D. There must be an IP header in the upper layer of this data frame
NEW QUESTION: 73
The role of the OSPF protocol is
A. Pass routing information
B. No effect
C. Transmit MAC information
D. Pass ARP information
Answer: A (LEAVE A REPLY)
NEW QUESTION: 74
Which of the following statements about single-arm routing are correct? ()
A. Need to create a subinterface on the router
B. On the switch, configure the port connected to the router as a Trunk port, and allow the
relevant AN frame to pass
C. Only one physical link is used between the switch and the router to connect
D. One physical connection per VLAN
NEW QUESTION: 75
What are the advantages of the OSPF protocol? ()*
A. Support area division
B. OSPF supports message authentication
C. OSPF supports load sharing for equal-cost routes
D. OSPF supports typeless inter-domain routing (CIDR)
NEW QUESTION: 76
Which of the following refers to network communication? ()*
A. Download emails from the company mailbox to your computer
B. Use instant messaging software (such as: QQ. WeChat) to chat with friends
C. Use computer to watch videos online
D. Use a computer to access the company's official website
NEW QUESTION: 77
Which of the following commands can change the device name to huawei? ()
A. Do name Huawei
B. Sysname Huawei
C. Hostname Huawei
D. Rename Huawei
NEW QUESTION: 78
What is the corresponding Solicited.-node multicast address for IPv6 iAilt2019::8:AB.? ()
A. FF02:1:FF08:AB
B. FF02:1:FF20:19
C. FF02:1:FE08:AB
D. FF02:FF08:AB
NEW QUESTION: 79
The MAC address table of existing switches is shown in the figure.
Which of the following statements are correct? () (Single-choice question) Huaweidisplay mac
address MAC address table of slot 0:
MAC Address VLAN/PEVLAN CEVLAN Port Type LSP/LSR-ID
VSI/SI MAC-Tunnel
5489 9811 0b49 1 Eth0/0/3 static 0/
Total matching items on slot 0 displayed =1
MAC address table of slot 0:
MAC Address VLAN/ PEVLAN CEVLAN Port Type LSP/LSR-ID
VSI/SI MAC-Tunnel
5489-989d-1d30 1 Eth0/0/1 dynamic 0/-
5489-9885-18a8 1 Eth0/0/2 dynamic 0/-
Total matching items on slot 0 displayed
A. The MAC address 5489-989d-1d30 is manually configured by the administrator
B. After the switch restarts, all MAC addresses need to be relearned
C. The MAC address 5489-9811-0b49 is manually configured by the administrator
D. The MAC address 5489-9885-18a8 is manually configured by the administrator
NEW QUESTION: 80
A. New configuration
B. Initial configuration
C. Current configuration
D. Default parameter
NEW QUESTION: 81
The following statement about static routing in Huawei equipment is wrong ().
A. The range of static route priority value is 1-255
B. The default value of the static route priority is 60
C. When the priority of a static route is 0, the route will definitely be preferred.
D. The cost value (Cost) of a static route cannot be modified.
NEW QUESTION: 82
What is the function of the command port trunk allow pass vlan all? ()
A. The connected peer device can dynamically determine which VLAN IDs are allowed.
B. All VLAN data frames are allowed to pass through this port
C. The opposite port connected to the port must be configured with port trunk permit vlan all at
the same time
D. If the port default vlan3 command is configured for the connected remote device, VLAN3
cannot communicate between the two devices
NEW QUESTION: 83
What is RouterDeadInterval of the OSPF protocol on the broadcast network by default? ()
A. 40s
B. 30s
C. 20s
D. 10s
NEW QUESTION: 84
The following description about the specified port of the spanning tree is correct ()
A. The port on the root switch must be a designated port
B. The port on the root switch must not be a designated port
C. Each switch has only one designated port
D. The designated port can forward configuration BPDU packets to the network segment
connected to it
NEW QUESTION: 85
The administrator cannot log in to the Huawei router through Telnet, but other administrators can
log in normally, so which of the following are the possible reasons? ()*
A. The administrator user account has been disabled
B. The Te1net service of the AR2200 router has been disabled
C. The authority level of the administrator user account has been modified to 0
D. The administrator user account has been deleted
NEW QUESTION: 86
Through sR (Segment Routing), an explicit path can be easily defined. The nodes in the network
only need to maintain the SegmentRouting information to cope with the real-time and rapid
development of the business. What are the following characteristics of Segment Routing?
A. At the same time, it supports the centralized control mode of the controller and the distributed
control mode of the transponder, providing a balance between centralized control and distributed
control
B. Source routing technology is used to provide the ability to quickly exchange text between the
network and upper-layer applications
C. SR (Segment Routing) adopts IP forwarding, no extra dimensioning is required-a label
forwarding table
D. Extending the existing protocol (eg IGP) can make the existing network better and smoothly
evolve
NEW QUESTION: 87
Compared with STP, which of the following port roles are newly defined in RSTP? ()*
A. Alternate port
B. Backup port
C. Root port
D. Designated port
NEW QUESTION: 88
There are hosts in a private network that need to access 1nternet. In order to achieve this
requirement, which of the following configurations should be done by the administrator on the
edge router of the network? ()*
A. DHCP
B. NAT
C. Default route
D. STP
NEW QUESTION: 89
Which statement about the dynamic AC. address table is correct?
A. By viewing the number of specified dynamic MAC. address table entries, you can get the
number of users communicating under the interface. After the device restarts, the previous
dynamic table entries will be lost
B. After the device restarts, the previous dynamic entries will be lost
C. The dynamic MAC obtained through the source AC. Address learning in the message. The
table entries will age
D. After the device restarts, the previously saved entries will not be lost
NEW QUESTION: 90
A. 172.16.255.254/24
B. 10.255.255.254/24
C. 192.168.1.1/24
D. 172.32.1.1/24
NEW QUESTION: 91
Take effect immediately after the Router ID of the OSPF process is modified ()
A. True
B. False
NEW QUESTION: 92
Which of the following IEEE802.11 standards does not support communication in the 5GHz
frequency band? ()
A. 802.11aC.wave 1
B. 802.11g
C. 802.11n
D. 802.11aC.wave 2
NEW QUESTION: 93
VLAN4095 cannot be created on Huawei switches, and VLAN1 cannot be deleted. ()
A. True
B. False
NEW QUESTION: 94
In an IPv4 network, AP supports static and DHCP methods to obtain IP addresses. ()
A. True
B. False
NEW QUESTION: 95
The network management system can only view the operating status of the device through the
SNMP protocol, but cannot issue configurations. ()
A. True
B. False
NEW QUESTION: 96
The routing table is generated by ()*
A. Dynamic routing protocol
B. Direct connection
C. Static
NEW QUESTION: 97
Which of the following descriptions of wireless devices is correct? ()
A. FIT AP generally independently completes user access, authentication, service forwarding and
other functions
B. The wireless controller AC is generally located at the convergence layer of the entire network,
providing high-speed, safe and reliable VLAN services
C. FAT AP. Generally work with wireless controller
D. The wireless device does not have a wired interface
NEW QUESTION: 98
If the broadcast address of a network is 172.16.1.255, what might its network address be? ()
A. 172.16.2.0
B. 172.16.1.253
C. 172.16.1.128
D. 172.16.1.1
NEW QUESTION: 99
The VlanIF IP addresses of the same switch cannot be the same. ()
A. True
B. False
NEW QUESTION: 100
A. Direct
B. PTP
C. Static
D. OSPF
NEW QUESTION: 101

When the IPv4 protocol is used as the network layer protocol, which field is not included in the
network layer header? ()
A. Sequence number
B. TTL
C. Source IPv4 address
D. Destination IPv4 address
NEW QUESTION: 102

On Huawei switches, you can use the vlan batch command to create multiple VLANs in batches,
simplifying the configuration process. ()
A. False
B. True
NEW QUESTION: 103

What kind of message does the OSPF protocol use to confirm the received LSU message? ()
A. LSR
B. LSACK
C. LSU
D. LSA
NEW QUESTION: 104
The router needs to modify the destination IP address in the data packet when forwarding the
data packet. ()
A. False
B. True
NEW QUESTION: 105

The output information of the sub-interface of a certain router's aggregation port 1 is shown in the
figure. Based on this information, which of the following statements is correct? ( )
[Router A] display Interface Eth-Trunk 1.100Eth-Trunk1.100 current state UP Line protocol
current state UP Last line protocol up time 2019-03-04 10:22:40 UTC.-08:00 Description:
HUAWEI, ARSeries, Eth-Trunk1.100 Interface Route Port, Hash arithmetiC.:According to SIP-
XOR-DIP, Maximal BW:2G.Current BW:2G, The Maximum Transmit Unit is 1500 Internet
Address is 10.0.12.2/24 IP Sending Frames'Format is PKTFIT ETENT 2, Hardwareaddress 1s
00e0-fc3b-2015 Current system time:2019-03-04 10:24:29-08:00 Last 300 seconds input rate0
bits/sec.0 packets/sec Last
300 seconds output rate 0 bits /seC.0 packets/sec Realtime 0 seconds inputrate 0 bits/seC.0
packets/sec Realtime 0 seconds output rate 0 bits/seC.0 packets/sec Input: 6 packets, 574 bytes,
Output: 7 packets, 638 bytes, Input bandwidth utilization 0% Output bandwidth utilization 0%
PortName Status Weight GigabitEthernet0/0/1 UP 1 GigabitEthernet0/0/2 UP 1 The Number of
Ports in Trunk:2 The Number of UP Ports in Trunk:2*
A. Two links exist on the aggregated port
B. The sub-interface of the aggregate port carries VLAN TAG100 when forwarding data frames
C. The sub-interface number of the aggregate port is 100
D. The P address of the sub-interface of the aggregate port is 10.0.12.2/24
NEW QUESTION: 106

The DHCP request message is sent by broadcast
A. False
B. True
NEW QUESTION: 107

As shown in the following figure, in the switching network, all switches are running the stp
protocol. When the topology is stable, which of the following switches can be used to modify the
BPDU sending cycle. Can it affect the SWD configuration BPDU sending cycle? () (Single-choice
question)
A. SWB
B. SWD
C. SWA
D. SWC
NEW QUESTION: 108

The network shown in the figure below. Which router is the BDR in this network? () (Single-choice
question)
A. Router A
B. Router B
C. Router C
D. No BDR
NEW QUESTION: 109

The administrator wants to configure the P address on the G0/0/0 interface of the router. Which of
the following addresses is correct?
A. 237.6.1.2/24
B. 145.4.2.55/26
C. 127.3.1.4/28
D. 192.168.10.112/30
NEW QUESTION: 110
A. 200.1.1.1
B. 50.1.1.1
C. 10.1.1.1
D. 100.1.1.1
NEW QUESTION: 111

Which of the following statements about the various versions of the SNMP protocol are correct?
A. SNMPv1 uses UDP as the transport layer protocol, while SNMPv2C. and SNMPv3 use TCP as
the transport layer protocol, so the reliability is higher.
B. SNMPv.3 messages have the functions of identity verification and encryption processing.
C. The SNMPv2C. message has the functions of identity verification and encryption processing.
D. SNMPv2C. follows the 5 protocol operations defined in the v1 version and adds two additional
operations.
NEW QUESTION: 112

The broadcast address is a special address that all the host bits in the network address are set to,
and it can also be used as a host address. ()
A. True
B. False
NEW QUESTION: 113

PAP authentication is more secure than CHAP authentication because it does not carry
passwords in clear text
A. True
B. False
NEW QUESTION: 114

Which of the following statements about the default route are correct? ()
A. There must be a default route in the routing table of any router
B. In the routing table, the default route appears in the form of a route to the network 0.0.0.0 (the
mask is also 0.0.0.0)
C. If the destination address of the message cannot match any other routing entries in the routing
table, the router will forward the message according to the default route
D. The default route can only be manually configured by the administrator
NEW QUESTION: 115

All ports on the root bridge exchange machine are designated ends ()
A. True
B. False
NEW QUESTION: 116

When configuring the PPP authentication mode as PAP, which of the following operations are
necessary? ()*
A. Add the user name and password of the authenticated party to the authenticating party's local
user list
B. Configure the data link layer encapsulation type of the interface connected to the peer device
to PPP
C. Configure the user name and password sent to the authenticating party on the authenticated
party
D. Set the authentication mode of PPP to CHAP
NEW QUESTION: 117

In standard STP mode, which of the following non-root switches will forward the C-set BPDU
generated by the root switch? ()
A. Designated port
B. Root port
C. Preparatory port
D. Backup port
NEW QUESTION: 118

The administrator cannot log in to the Huawei router through Telnett, but other administrators can
log in normally, so which of the following are the possible reasons? ()*
A. The Te1net service of the AR2200 router has been disabled
B. The administrator user account has been disabled
C. The administrator user account has been deleted
D. The authority level of the administrator user account has been modified to 0
NEW QUESTION: 119

If it is UDP, the value of the protocol field of the network layer is 6 ()
A. False
B. True
NEW QUESTION: 120
A. Listening
B. Discarding
C. Learning
D. Forwarding
NEW QUESTION: 121

The IEEE802.11aC. standard only supports the 5GHz frequency band ()
A. True
B. False
NEW QUESTION: 122

Which of the following protocols consist of the PPP agreement? ()*
A. LCP
B. Authentication protocol
C. PPPOE
D. NCP
NEW QUESTION: 123

Apply the ACL configured in the figure in Telnet. Only the device with the IP address of
172.16.105.2 is allowed to log in remotely: ()#acl number 2000 rule 5 permit source
172.16.105.20#
A. False
B. True
NEW QUESTION: 124

Which of the following authentication methods does not require the user name and password? ()
A. authorization-mode hwtacacs
B. authentication-mode none
C. Authentication-mode hwtacacs
D. authentication-mode local
NEW QUESTION: 125

Which of the following commands can be used to query the configuration information of the
device's 0SPF protocol? ()*
A. Enter the command "display t in the OsPF protocol view.
his\
,.:
,.:
B. dis ip routing-table
NEW QUESTION: 126

The administrator has configured the router as shown in the figure. At the same time, the
administrator wants to assign a shorter lease period to the DHCP address. Which of the following
commands should be used? () (Single-choice question)
A. dhcp select relay

B. lease day 0 hour 10
C. lease
D. lease 24
NEW QUESTION: 127

The last option field (option) of 1Pv4 is variable-length optional information. What is the maximum
length of this field? ()
A. 10B
B. 40B
C. 60B
D. 20B
NEW QUESTION: 128

In the network as shown in the figure below, host A logs in to router A through Telnet. Then
obtains the configuration file of router B through FTP on the remote interface. At this time, how
many TCP connections does router A have? () (Single-choice question)
A. 2
B. 4
C. 3
D. 1
NEW QUESTION: 129
As shown in the figure, after the two routers are configured with 0SPF, the administrator
configures the <silent-interface$0/0/0> command on RTA. Is the following description correct? ()
(Multiple Choice Questions)
A. The neighbor relationship between the two routers will be down

B. The neighbor relationship between the two routers will not be affected
C. RTA will continue to receive, analyze and process OSPF packets sent by RTB
D. RTA will no longer send OSPF packets
NEW QUESTION: 130
A. Point-to-Multipoint
B. Point-to-Point
C. Broadcast
D. Non-Broadcast Multi-Access
NEW QUESTION: 131

All the devices in the picture can communicate normally. Is the corresponding relationship
between the MAC address table of $WA and the port correct? () (Single-choice question)
A. MAC-AG0/0/1
MAC-BG0/0/2
MAC-CG0/0/1
B. MAC-A--GO/0/1
MAC-B-G0/0/2
MAC-C-GO/0/3
C. MAC-A--GO/0/1
MAC-B--G0/0/1
MAC-C--GO/0/3
D. MAC-AG0/0/2
MAC-BG0/0/2
MAC-CG0/0/3
NEW QUESTION: 132

As shown in the figure below, the network. All switches enable the STP protocol. Disable SWA's
G0/0/2 port to configure the BPDU sending function. SWC's G0/0/1 reconverges to become the
root port. Which of the following statements is correct about this process? () (Multiple Choice
Questions)
A. SWB forwards TCN BPDU to SWA

B. SWB sends configuration BPDU with TCA set to SWC
C. SWC sends TCN BPDU to SWB
D. SWA sends configuration BPDU with TC set
NEW QUESTION: 133

What is wrong about the ARP message? ()
A. Any link layer protocol requires ARP protocol to assist in obtaining data link layer identification
B. ARP packets cannot be forwarded to other broadcast domains
C. ARP request message is sent by broadcast
D. ARP reply message is sent by unicast party
NEW QUESTION: 134

The two ends of the PPP link are not in the same network segment and cannot communicate
A. False
B. True
NEW QUESTION: 135

Which of the following fields is not included in the HELL0 packet of the OSPF protocol?
A. Network HA.sk
B. He11 oInt erval
C. He11 oInt erval
D. sysname
E. Nei ghbor
NEW QUESTION: 136

By default, network devices running the SNMPv2C. protocol use which of the following port
numbers to send trap messages to the network management system? ()
A. 6
B. 17
C. 162
D. 161
NEW QUESTION: 137

Which of the following elements are included in the routing table? ()*
A. Cost
B. Nexthop
C. Interface
D. Protocol
E. Destination/mask
NEW QUESTION: 138

The network is shown in the figure below. Switch configuration information is shown in the figure.
Which of the following statements is correct? () (Multiple Choice Questions)
A. Data frames on the two links do not include VLANTAG
B. The PVID of the switch GigabitEthernet0//1 port is 20
C. Host A and Host B cannot be pinged
D. Host A and Host B can be pinged
NEW QUESTION: 139

Which of the following parameters cannot be used for advanced access control lists? ()
A. Physical interface
B. Agreement number
C. time limit
D. Destination port number
NEW QUESTION: 140

As shown in the figure, host A and host B want to implement inter-VLAN communication through
single-arm routing. What configuration should be done under the G0/0/1.1 interface of RTA?()
(Single-choice question)
A. dotlq termination vid 30
B. dotlq termination vid 10
C. dotlg termination vid 1
D. dotlq termination vid 20
NEW QUESTION: 141

In the OSPF protocol, which of the following descriptions of DR is correct? ()
A. If the priority values of the two routers are different, the router with the lower priority is selected
as the DR
B. If the priority values of the two routers are equal, the router with the larger Router ID is
selected as the DR
C. DThe adjacency relationship should also be established between R and BDR
D. By default, all routers in this broadcast network will participate in the DR election
NEW QUESTION: 142

The switch GE0/0/1 port configuration information is shown in the figure. Which VLAN data frame
does the switch not carry when forwarding?()
A. 20
B. 10
C. 30
D. 40
NEW QUESTION: 143

As shown in the figure below, are the following statements correct? () (Multiple Choice Questions)
A. Host A and Host B cannot obtain each other's MAC address

B. The broadcast address of host A and host B are the same
C. The following entry 10.0.12.5 MAC-B exists in the ARP cache of host A
D. Host A can ping host B
NEW QUESTION: 144

Which of the following information prompts is used by the VRP operating platform for incomplete
input commands? ()
A. Error:Too many parameters founD.at'position
B. Error: Wrong parameter founD.at'position
C. False Incomplete commanD.founD.at'position
D. Error Ambiguous commanD.founD.at"position
NEW QUESTION: 145

UDP cannot guarantee the reliability of data transmission, and does not provide the functions of
message sequencing and flow control. It is suitable for flows with low transmission reliability
requirements but high transmission speed and delay requirements. ()
A. True
B. False
NEW QUESTION: 146

The MPLS label header is encapsulated between the data link layer header and the network layer
header of the message. ()
A. True
B. False
NEW QUESTION: 147

The RSTP protocol uses the P/A mechanism to speed up the speed of the upstream port to the F
orwarding state, but what is the reason for the no temporary loop? . Shorten the time of
Forward.Delay
A. Speed up port role election
B. Edge port
C. Shorten the time of Forward.Delay
D. Ensure that there will be no temporary loops through the synchronization mechanism
NEW QUESTION: 148

By default, the bridge priority of Huawei switches is 32768 ()
A. False
B. True
NEW QUESTION: 149

The administrator cannot log in to the Huawei router through Telnet, but other administrators can
log in normally. What are the possible reasons for the following items? ()
A. The administrator user account has been disabled
B. The Telnet service of the AR2200 router has been disabled
C. The administrator user account has been deleted
D. The authority level of the administrator user account has been modified to 0
NEW QUESTION: 150
A. If the DHCP client and the DHCP server are not on the same network segment, the DHCP
relay needs to be used to forward DHCP messages
B. After receiving the DHCP request or response message, the DHCP relay does not modify the
message format and forwards it directly
C. network does not allow multiple DHCP servers
D. DHCP client and DHCP server must be connected to the same switch
NEW QUESTION: 151

The Layer 2 Ethernet switch generates entries in the MAC address table according to the () of the
Ethernet frame received by the port. ()
A. Destination IP address
B. Source IP address
C. Source MAC. Address
D. Destination MAC. Address
NEW QUESTION: 152

The transmission rate of the Eth-Truk port in manual link aggregation mode is related to ().*
A. Whether an IP address is configured on the member port
B. Is the member port on the public or private network
C. Bandwidth of member port
D. Number of member ports
NEW QUESTION: 153

What kinds of stable states does the neighbor relationship of OSPF protocol have? (Multiple
Choice)
A. Attempt
B. Down
C. 2-way
D. Full
NEW QUESTION: 154

By default, on the broadcast networkOSPFWhat is the transmission period of the protocol HELLO
message? ()
A. 20s
B. 30s
C. 40s
D. 10s
NEW QUESTION: 155

The administrator configures R1 as shown in the figure. But R1 cannot learn the routes of other
routers, so it may be.
The reason is? () (Multiple Choice Questions)
A. The area configured by this routerID and its neighbor router areaID is different
B. When this router is configured, the ospf process number is not configured
C. This router is not configured with authentication function but the neighbor router is configured
with authentication function
D. This router did not announce the network connected to neighbors when configuring ospf
NEW QUESTION: 156

Which of the following options describes the concept of NFV architecture correct?
A. NFVO (NFV Orchestrator). Responsible for business orchestration.
B. VIM (VirtualiseD.Infrastructure Manager) virtual resource management is responsible for the
virtualization of infrastructure.
C. VNFM. Virtual network function management, responsible for the life cycle management of
VNF.
D. MANO is composed of NFVO, VNFM and VIM
NEW QUESTION: 157

When the FIT AP goes online, the software version will be downloaded from AC.
A. True
B. False
NEW QUESTION: 158

The following two configuration commands can implement router RIA. The route to the same
destination 10.1.1.1.0 is active and standby:
A. False
B. True
NEW QUESTION: 159

The election of the root switch in STP only compares the priority of the switch, while in RSTP, the
priority of the switch is compared with the MAC address at the same time. ()
A. False
B. True
NEW QUESTION: 160

A. Send tagged messages
B. Add the VLAN information of the message, and then send it out
C. Strip the VLAN information of the message, and then send it out
D. Type the PVID. information of this port, and then send it out
NEW QUESTION: 161

Which of the following working modes are supported by Huawei enterprise APs? ()*
A. Local
B. FIT
C. Cloud
D. FAT
Answer: B,D (LEAVE A REPLY)
NEW QUESTION: 162

Which of the following commands can be used to check the session status of the PPPoE client?
()
A. display pppoe-client session summary
B. display current configuration
C. display pppoe-client sessi on packet
D. display ip interface brief
NEW QUESTION: 163

By default, what is the lease period for the DHCP server to assign an IP address? ()
A. 12h
B. 24h
C. 18h
D. 1h
NEW QUESTION: 164

If the Ethernet data frame Length/Type=0X0806, which statement is correct ()*
A. The destination MAC of this data frame. The address may be FFFF-FFFF-FFFF
B. The source MAC of the secondary data frame. The address must not be FFFF-FFFF-FFFF
C. This data frame is an IEEE802.3 frame
frame
D. The secondary data frame is Ethernet
NEW QUESTION: 165

Three Layer 2 switches are interconnected with one HUB. The switches are all enabled with STP
bridge ID. Refer to the figure below. What are the default errors of other configurations? ()
(Single-choice question)
A. G0/0/1 of SWC is alternative. It is in blocking state

B. SWA is the root bridge in the simple network
C. G0/0/2 of SWA is blocked
D. The two ports on SWA are designated ports and are in the forwarding state
NEW QUESTION: 166

As shown in the figure below, assuming that the MAC address table of SWA. is as follows, now
host A. sends a data frame with a destination MAC address of MAC-B.
Which of the following statements is correct? ()
A. SWA. Discard the data frame

B. Flood out this data frame
C. Forward this data frame from port G0/0/3
D. Forward this data according to the G0/0/2 port
NEW QUESTION: 167

Which of the following elements are included in the routing table? ()*
A. Destination/Mask
B. Protocol
C. NextHop
D. Interface
NEW QUESTION: 168

How many types of data flows with different service levels can be marked based on MPLS labels?
()
A. 16
B. 4
C. 8
D. 2
NEW QUESTION: 169

RADIUS is a common protocol to implement AAA.
A. True
B. False
NEW QUESTION: 170
A. False
B. True
NEW QUESTION: 171

Trunk ports can allow multiple VLANs to pass, including VLAN4096. ()
A. True
B. False
NEW QUESTION: 172

Which of the following are not open interfaces for Huawei network equipment? ()*
A. RESTCONF
B. NETCONF
C. XML
D. JSON
NEW QUESTION: 173

The following figure shows the routing table of a router. When the router receives a data packet
with a destination IP address of 9.LL, the router will forward it according to the route of 91.0.0.16
because the mask length of this route is longer. ()
A. False
B. True
NEW QUESTION: 174

In the STP protocol, which of the following factors will affect the election of the root switch? ()*
A. Switch priority
B. MAC address of the switch
C. Switch interface bandwidth
D. IP address of the switch
E. Switch interface ID
NEW QUESTION: 175

Which information of the data frame is used by the VLANIF interface to determine whether to
perform Layer 2 or Layer 3 forwarding? ()
A. Destination port
B. Destination MAC
C. Source MAC
D. Source IP
NEW QUESTION: 176

The router Radius information configuration is shown in the figure. Which of the following
#Radius-server template Huawei radius-server shared.key cipher statements are correct?
Huawei radius-server authentication 200.0.12.1 1812 radius-server accounting 200.0.12.1 1813#*
A. The P address of the accounting server is 200.0.12.1
B. The P address of the authorization server is 200.0.12.1
C. The source IP address of the Radius packet sent by the router is 200.0.12.2
D. The P address of the authentication server is 200.0.12.1
NEW QUESTION: 177

The configuration of the country code will affect the actual frequency used for transmission and
the maximum transmission power ()
A. False
B. True
NEW QUESTION: 178

What is the role of link aggregation? ()*
A. Facilitate analysis of data
B. Improve network reliability
C. Achieve load sharing
D. Increase bandwidth
NEW QUESTION: 179

After FIT AP obtains AC.'s IP address, what is the first operation to perform? ()
A. Download the configuration file
B. Request configuration file
C. Establish a CAPWAP tunnel
D. Upgrade software version
NEW QUESTION: 180
A. True
B. False
NEW QUESTION: 181

Ethernet_I containing the Ethernet headerIWhat is the length of the frame? ()
A. 64-1500B
B. 64-1518B
C. 60-1560B
D. 46-1500B
NEW QUESTION: 182

When the switch port sends a data frame that carries the same VLANTAG and PVID., it must be
stripped of VLANTAG and forwarded. ()
A. True
B. False
NEW QUESTION: 183

If host A. has the ARP cache of host B., host A. can ping host B. ()
A. False
B. True
NEW QUESTION: 184

The Layer 2 networking of WLAN refers to STA. It uses AC as its own gateway. ()
A. True
B. False
NEW QUESTION: 185

The switch is connected to the host. What is the common port link type of the switch? ()
A. Trunk link
B. HybriD. link
C. Access link
D. Trunk link
NEW QUESTION: 186

On an interface that uses PPP as the data link layer protocol, can you configure a static route by
specifying the next hop address or outbound interface? ()
A. False
B. True
NEW QUESTION: 187

The output information of the routing table of a certain router is shown in the figure. Which of the
following statements is correct? () (Multiple Choice Questions) R1display ip routing-table Route
Flags: R-relay, D-download to fib
A. The NextHop for this router to reach 10.0.2.2 is 10.0.21.2

B. The NextHop for this router to reach 10.0.0.1 is 10.0.21.2
C. The NextHop for this router to reach 10.0.2.2 is 10.0.12.2
D. The NextHop for this router to reach 10.0.0.1 is 10.0.12.2
NEW QUESTION: 188

According to the following configuration, which statement is correct? () (Multiple Choice
Questions)
Int g0/0/1
Int g0/0/2
Port hybrid pvid vlan 20
Port hybrid pvid vlan 10
Port hybrid untagged vlan 10 20
Port hybrid untagged vlan 10 20
A. The pvid of switch G0/0/1 port is 20
B. Host A (PC3) can ping through host B (PC4) more
C. The two link data frames do not contain vlan tag
D. Host A (PC3) cannot ping host B (PC4)
NEW QUESTION: 189

Which of the following statements about RA and RS messages in IPv6 are correct? ()*
A. RA. Used to reply address prefix information
B. RA. Used to request address prefix information
C. RS is used to request address prefix information
D. RS is used to reply address prefix information
NEW QUESTION: 190

The output information of the sub-interface of a router aggregate port 1 is shown in the figure.
Based on this information, which of the following statements are correct? ()
A. The sub-interface of the aggregate port carries B with VLAN when forwarding data frames
B. Two links exist on the aggregated port
C. The sub-interface number of the aggregate port is 100
D. The P address of the sub-interface of the aggregate port is 10.0.12.2/24
NEW QUESTION: 191

The tree network topology is actually a hierarchical star structure, which is easy to expand the
network scale, but the higher the level, the more serious the network problem caused by the node
failure ()
A. False
B. True
NEW QUESTION: 192

Which of the following address types does IPV6 have?
A. Broadcast address
B. Link local address
C. Multicast address
D. Anycast address
E. Unicast address
NEW QUESTION: 193

The router uses the sub-interface as the gateway of the host, and the P address of the gateway is
10.0.12.2. Which of the following commands can achieve this requirement? ()
A. Interface GigabitEthernet0/0/0.20 Dotlq termination viD.20 ip address10.0.12.2\n255.255.255.0
Arp broadcast enable#
B. Interface GigabitEthernet0/0/0.20 Dotlq termination viD.10 ip address10.0.12.2n255.255.255.0
C. Interface GigabitEthernet0/0/0.10 Dotlq termination viD.20 ip address10.0.12.2n255.255.255.0
D. Interface GigabitEthernet0/0/0.10 Dotlq termination viD.10 ip address10.0.12.2n255.255.255.0
Answer: A,C (LEAVE A REPLY)
NEW QUESTION: 194

In the network shown in the figure below, the bridge ID of the switch has been marked. Enter the
command stp rootsecondary on the sWD. switch and the following switch will become the root
bridge of this network. ()
A. SWC
B. SWA
C. SWD
D. SWB
NEW QUESTION: 195

The correct setting of the terminal emulation program when configuring the router through the
Console ()
A. 19200bps, 8 data bits, 1 stop bit, no checksum and no flow control
B. 9600bps, 8 data bits, 1 stop bit, even parity and hardware flow control
C. 9600bps, 8 data bits, 1 stop bit, no checksum and no flow control
D. 4800bps, s data bit, 1 stop bit, odd checksum and no flow control
NEW QUESTION: 196

Which of the following statements about Prefix Segment is wrong? ()
A. Prefix Segment spreads to other network elements through the IGP protocol, which is globally
visible and effective
B. Prefix Segment is used to identify a destination address prefix in the network (Prefix)
C. Prefix Segment needs to be configured manually
D. Prefix Segment can be automatically allocated by IGP
NEW QUESTION: 197

By default, in the SNMP protocol, which port number does the agent process use to send alarm
messages to N? ()
A. 161
B. 162
C. 163
D. 164
NEW QUESTION: 198

The static MAC. address table will not be lost after the system restarts ()
A. True
B. False
NEW QUESTION: 199

Which of the following statements about IPv6 address configuration is correct? ()*
A. IPv6 supports stateless automatic configuration
B. IPv6 address supports automatic configuration of multiple clocks
C. IPv6 addresses can only be configured manually
D. IPv6 supports DHCPv6 for address configuration
NEW QUESTION: 200

The ACL configuration information of a certain router is shown in the figure. Which of the following
statements is correct? () (Single-choice question)
A. Packets with source IP addresses of 192.168.1.1 and 192.168.1.254 are matched by the
permit rule
B. The packet whose source IP address is 192.168.1.254 is matched by the permit rule
C. The packet with the source IP address 192.168.1.1 is matched by the deny rule
D. The packet with the source IP address of 192.168.1.1 is matched by the pemit rule
NEW QUESTION: 201

Which of the following IPv6 is a global unicast address ()
A. FEE:FCFF:FEEF:FEC
B. FF:02:2E0:FCFF:FEEF:FEC
C. 2001::12:1
D. FF02:1
NEW QUESTION: 202

The G0/0/1 interface configuration information of router A is shown in the figure. Which of the
following statements are correct? () (Multiple Choice Questions)
A. The interface will not forward the received FTP packets
B. This interface will not forward ICMP packets
C. This interface will not forward received SNMP packets
D. This interface can establish OSPF neighbor relationships with other routers
NEW QUESTION: 203

Which of the following 0SPF protocol packets can ensure the reliability of LSA update? ()
A. DD
B. LSR
C. LSACK
D. LSU
NEW QUESTION: 204

The administrator hopes that RTA. uses static routing and preferentially sends data packets to
RTB's Loopback0 interface through G0/0/1 port, while G0/0/2 is used as a backup. How to
configure on RTA to achieve this requirement ()
A. ip route-statiC.10.0.2.2255.255.255.255 10.0.12.2ip
Route-statiC.10.0.2.2255.n255.255.255 10.0.21.2 preference 40
B. ip route-statiC.10.0.2.2255.255.255.255 10.0.12.2ip
Route-statiC.10.0.2.2255.255.n255.25510.0.21.2
C. ip route-statiC.10.0.2.2255.255.255.25510.0.12.2ip
Route-statiC.10.0.2.2255.n255.255.255
D. ip route-statiC.10.0.2.2255.255.255.25 5 10.0.12.2 preference 70 ip route-
static/n10.0.2.2255.255.255.25510.0.21.2
NEW QUESTION: 205

The two-layer switch is a data link layer device, which can identify the MAC address information
in the data frame, and record these MAC addresses and corresponding port information in its own
MAC address table. ()
A. False
B. True
NEW QUESTION: 206

The Backup port in RSIP can replace the failed root port. ()
A. True
B. False
NEW QUESTION: 207

The bridge ID of the STP protocol in the switching network is as follows. Which of the following
bridge IDs will be the root bridge? ()
A. 3276800-01-02-03-04-CC
B. 3276800-01-02-03-04-AA
C. 3276800-01-02-03-04-BB
D. 409600-01-02-03-04-DD
NEW QUESTION: 208

Which of the following IEEE802.11 standards only supports the 2.4GHz frequency band for
communication? ()
A. 802.11ax
B. 802.11g
C. 802.11n
D. 802.11a
NEW QUESTION: 209

In the network shown in the figure below, switch A and router A are connected by two links, and
the two links are aggregated in manual load sharing mode. The aggregated port number is 1, and
the aggregated link performs data forwarding It needs to carry VLAN TAG100, and switch A uses
trunk link. Which of the following configurations should be used for switch A? ()
A. interface Vlanif 100

Ip address10.0.12.1255.255.255.0
#
B. interface Eth-Trunk 1
Port link-type trunk
Port trunk allow-pass vlan 100#
Interface GigabitEthernet0/0/1Eth-trunk 1
#
#
C. interface Eth-Trunk 1
Ip address10.0.12.1255.255.255.0#
D. interface Eth-Trunk 1
Mode lacp-static
Port link-type trunk
Port trunk allow-pass vlan 100#
#
#
NEW QUESTION: 210
A. Assign any physical interface to VLAN10

B. Assign an interface that must be Up and must be of type Trunk into VLAN 10
C. Assign a physical interface that must be Up to VLAN 10
D. Use the command "undo shutdown" under the VLANIF10 interface
NEW QUESTION: 211

On an interface that uses PPP as the data link layer protocol, you can configure a static route by
specifying the next hop address or outgoing interface. ()
A. False
B. True
NEW QUESTION: 212

What kind of packets does the OSPF protocol use to discover and maintain neighbor
relationships? ()
A. LSR
B. DD
C. HELLO
D. LSU
NEW QUESTION: 213

In which working state of the port in the STP protocol can it be changed to the Forwarding state
without going through other states? ()
A. Learning
B. Listening
C. Disabled
D. Blocking
NEW QUESTION: 214

Network administrators use Ping to test the connectivity of the network. Which of the following
protocols may be used in this process? ()
A. TCP
B. ARP
C. UDP
D. ICMP
NEW QUESTION: 215

Which of the following fields is not included in the HELL0 packet of the OSPF protocol? ()
A. Network mask
B. Hellointerval
C. Sysname
D. Neighbor
NEW QUESTION: 216

When the router forwards a data packet, if it does not match the corresponding detailed route and
there is no default route, it will directly discard the data packet ()
A. True
B. False
NEW QUESTION: 217

After the network administrator uses the TracertRoute function on the router device, in the data
packet sent by the router, the value of the Protoco1 field in the IPv4 header is? ()
A. 1
B. 17
C. 2
D. 6
NEW QUESTION: 218

If the configured ACL rules have an inclusive relationship, it should be noted that the rule
numbers of strict conditions need to be sorted first, and the rule numbers of loose conditions need
to be sorted later to prevent packets from hitting the rules of loose conditions and stop being
pushed down to continue matching. Cannot hit the strict conditions of the rules. ()
A. True
B. False
NEW QUESTION: 219

The following description of static and dynamic routing is wrong ().
A. After the link fails, the static route can automatically complete the network convergence.
B. After the administrator deploys the dynamic routing protocol in the corporate network, later
maintenance and expansion can be more convenient
C. Static routing is easy to configure and easy to manage when applied in the enterprise
D. Dynamic routing protocols take up more system resources than static routing protocols.
NEW QUESTION: 220
A. The upper layer of a data frame must exist IP header

B. Each data frame must carry VLAN TAG
C. There is always a TCP header in the upper layer of each data frame
D. There is always a UDP header in the upper layer of each data frame
NEW QUESTION: 221

The network administrator has captured a data frame on the network, and its destination MAC
address is 01-00-5E-A0-B1-C3. The correct statement about the MAC. address is ().
A. It is a multicast MAC. address
B. It is an illegal MAC. address
C. It is a broadcast MAC. address
D. It is a unicast MAC. address
NEW QUESTION: 222

Which of the following advantages does the single-arm routing method achieve routing
intercommunication between Vlan? ()
A. Reduce the use of IP addresses
B. Reduce the number of equipment
C. Reduce routing table entries
D. Reduce the number of chain connections
NEW QUESTION: 223

The output information of the STP port of a certain switch is shown in the figure. Which of the
following statements is wrong? () (Single-choice question) Huaweidisplay stp interface Ethernet
0/0/1 CIST Global InfoMode STP-------
-------
CIST Bridge: 32768.4c1f-cc46-4618
Config TimesHello 4s MaxAge 20s FwDly 15s MaxHop 20
Active Times:Hello 2s MaxAge 20s FwDly 15s MaxHop 20
CIST Root/ERPC:0.4c1f-ccf7-3214/200000
CIST RegRoot/IRPC: 32768.4c1f-cc46-4d18/0
A. The period for sending configuration BPDUs on this port is 2s
B. The switch is not a root bridge
C. Forward-delay is 20s
D. Configure the MaxAge of the BPDU to 20s
NEW QUESTION: 224

When the host frequently moves, which VLAN division method is most appropriate? ()
A. Based on MAC. Address division
B. Based on strategy division
C. Based on port division
D. Based on IP subnetting
NEW QUESTION: 225
How to enter in the vP operating system OView of SPF area 0? ()*
A. (Huawei-ospf-1) areA.0
B. (Huawei-ospf-1) areA.0 enabel
C. (Huawei-ospf-1) areA.0.0.0.0
D. (Huawei) ospf areA.0
NEW QUESTION: 226

The classic network forwarding method is based on router routing table forwarding. The
forwarding method of OpenFlow switches is based on flow table forwarding. Which of these two
forwarding methods are correct? ()*
A. The matching method of the flow table is to match the MA of the flow at the same
timeC.Address andIP address
B. The flow table is getting longer. A network device can only have one flow table
C. The matching method of the address table is to match the route of the destination network
segment with the longest mask
D. The routing table is of fixed length. A device can only have one public routing table
NEW QUESTION: 227

What kind of message does the DHCP server use to confirm that the host can use the IP
address? ()
A. DHCP ACK
B. DHCP DISCOVER
C. DHCP OFFER
D. DHCP REQUSET
NEW QUESTION: 228

For multiple paths to the same destination network, the router needs to select by comparing the
magnitude of the Prererence value. If the Preference is the same, the router selects according to
the magnitude of the Cost value. ()
A. False
B. True
NEW QUESTION: 229

When adopting LACP mode for link aggregation, what is the default system interference level of
Huawei switches? ()
A. 4096
B. 36864
C. 32768
D. 24576
NEW QUESTION: 230
A. delete /unreserveD.config.zip
B. reset config.zip
C. clear config.zip
D. delete /force config.zip
NEW QUESTION: 231

As shown in the picture. About OSPF topology and configuration. Which of the following
statements is correct? () (Single-choice question)
A. R1 is more likely to become DR than R2, because its interface DR priority value is smaller
B. As long as the interface network type of R1 is restored to the default broadcast type, and the
hello time is adjusted to 10s, R1 and R2 can establish a stable neighbor relationship
C. As long as the interface network type of R1 is restored to the default broadcast type, R1 and
R2 can establish a stable neighbor relationship
D. R1 and R2 can establish a stable OSPF neighbor relationship
NEW QUESTION: 232

Which of the following features does the OSPF protocol have? ()*
A. Calculate the shortest path based on the number of hops
B. Prone to routing loops
C. Support area division
D. Trigger update
NEW QUESTION: 233

The NAT configuration is as follows, which IP can be converted when accessing the public
network (RTA) acl2000 (RTA-acl-basic-2000) rule5 permit source 192.168.1.00.0.0.255 RTA-acl-
basic-2000) rule 10 deny source 192.168. 1.30 (RTA-acl-basic-2000) quit RTA) interface
serial1/0/0 (RTA-Serial1/0/0) nat outbounD.2000*
A. 192.168.1.3
B. 192.168.2.1
C. 192.168.1.2
D. 192.168.1.1
NEW QUESTION: 234

Which of the following fields does the MPLS header include? ()*
A. Label
B. EXP
C. Tos
D. TTL
NEW QUESTION: 235

By default, the root path cost of the root bridge in the STP protocol must be 0 ()
A. False
B. True
NEW QUESTION: 236

The output information of the router is shown in the figure. Which of the following statements is
wrong? () (Single-choice question)
A. Ethernet (The IP address of the /0/0 interface is 10.0.12.1/24

B. The broadcast address corresponding to the Ethernet0/0/0 interface is 10.0.12.255
C. The physical link of the Ethernet0/0/0 interface is normal
D. The MTU value of the Ethernet0/0/0 interface is 1480
NEW QUESTION: 237

The switch becomes a logical switch after stacking and clustering, and Eth-Trunk across physical
devices can be deployed to improve network reliability. ()
A. True
B. False
NEW QUESTION: 238

What are the advantages of using dynamic host configuration protocol DHCP to assign IP
addresses? ()*
A. Heavy workload and difficult to manage
B. avoid IP address conflict
C. can be realized IP address reuse
D. When the configuration information changes (such as DNS), only the administrator needs to
modify it on the DHCP server, which is convenient for unified management
NEW QUESTION: 239

The CAPWAP protocol stipulates the communication standard between AC. and Ap. Which of the
following statements about the CAPWAP protocol is correct? ()
A. In order to reduce the burden on the AP, CAPWAP uses a tunnel to simultaneously transmit
control messages and data messages
B. The AP can encapsulate the user's data message in CAPWAP and hand it over to the AC.
C. CAPWAP is an application layer protocol based on TCP transmission
D. In order to establish a CAPWAP tunnel, the FIT Ap can only discover the AC through
broadcast messages
NEW QUESTION: 240
A. Management level
B. Configuration level
C. Monitoring level
D. Access level
NEW QUESTION: 241

Which of the following networks belong to a local area network? ()
A. Internet
B. A company office network
C. A home network
D. Broadband Metropolitan Area Network
NEW QUESTION: 242

What is the port number used by the FTP protocol control plane? ()
A. 24
B. 23
C. 21
D. 22
NEW QUESTION: 243

The administrator hopes that all hosts cannot access the Internet from 8:00-17:00 every day, so
in the interface configuration of GO/0/1, trahic-HIter outbounD. Which ACL rule needs to be
bound? ()
A. time-range am9topm5 08:00 to 17:00 off-day acl number 2004 rule 5 permit timerange
B. time-range am9topm5 08:00 to 17:00 daily acl number 2001 rule 5 deny time-range am9topm5
C. time-range am9topm5 08:00 to working-day Acl number 2003 rule 5 deny time-range
am9topjni5
D. time-range am9topm5 07:00 to 18:00 daily Acl number 2002
NEW QUESTION: 244

The switch G0/0/1 port configuration information is shown in the figure. Which VLAN data frame
does the switch forward without VLANTAG? ? () (Single-choice question)
A. 20
B. 10
C. 40
D. 30
NEW QUESTION: 245
In order to realize the network layer function on the VLANIIF interface, need to be configured on
the VLANIF interface? ()*
A. MAC.Address
B. IP address
C. Subnet mask
D. IP prefix
NEW QUESTION: 246

In the VRP interface, use the command startup saved-configuration backup.cfg. Configure the
startup.cfg file to be used at the next startup ()
A. False
B. True
NEW QUESTION: 247

Layer 2 ACL can match source MAC, destination MAC, source IP, destination IP and other
information. ()
A. False
B. True
NEW QUESTION: 248

When deploying ACL on Huawei equipment, which of the following descriptions is correct is ()
A. When calling ACL under the interface, it can only be applied to the outbound direction
B. When ACL defines rules, it can only proceed in the order of 10, 20, 30
C. The same ACL can be called under multiple interfaces
D. ACL can match the TCP/UDP port number of the packet, and can specify the range of port
numbers
E. ACL cannot be used to filter OSPF traffic, because COSPF traffic does not use UDP protocol
encapsulation
NEW QUESTION: 249

According to the command shown in the figure, which of the following descriptions is correct? ()
(Multiple Choice Questions)
A. GigabitEthernet (the pVID of port 0/0/2 is 10

B. GigabitEthernet (PVD of port 0/0/1 is 10
C. The pVD of the GigabitEthernet0/0/2 port is 1
D. GigabitEthernet (PVID of port 0/0/1 is 1
NEW QUESTION: 250
A. False
B. True
NEW QUESTION: 251

A network administrator of a company wants to be able to remotely manage the network
equipment of the branch. Which of the following protocols will be used? ()
A. TeInet
B. VLSM
C. CIDR
D. RSTP
NEW QUESTION: 252

Which of the following statements about link aggregation are correct? ()
A. When two devices are connected, it is necessary to ensure that the link aggregation mode on
both devices is the same
B. GE electrical interfaces and GE optical interfaces cannot be added to the same Eth-Trurnk
interface
C. Eth-Trurnk interfaces cannot be nested
D. GE interface and FE interface cannot be added to the same Eth-Trunk interface
NEW QUESTION: 253

In order to detect the connectivity status of the CAPWAP tunnel, after the CAPWAP tunnel is
established, which of the following CAPTAP messages is used by the AC for detection? ()*
A. DPD
B. Echo
C. Keepalive
D. Hello
NEW QUESTION: 254

The output information of the router is shown in the figure. Which of the following statements is
wrong? () (Single-choice question)
The broadcast address corresponding to the AEthernet0/0/0 interface is 10.0.12.255

A. The physical link of the Ethernet0/0/0 interface is normal
B. Ethernet (The IP address of the /0/0 interface is 10.0.12.1/24
C. Ethernet0/0/0 interfaceThe MTU value is 1480
NEW QUESTION: 255

An ACL rule is as follows: Which of the following IP addresses can be matched by permit rules? ()
rule5per mit ip source10.0.1.00.0.254.255*
A. 10.0.4.5
B. 10.0.1.2
C. 10.0.3.4
D. 10.0.2.3
NEW QUESTION: 256

Management Information Base (MIB) Information Base) is a virtual database, which only exists on
the NMS. ()
A. False
B. True
NEW QUESTION: 257

Which of the following features does the default VLAN in the Layer 2 Ethernet switch have? ()*
A. By default, all ports of the switch are member ports of the default VLAN
B. The default VLAN cannot be deleted manually
C. The P address configured on the switch will only be applied to the member ports of the default
VLAN 390
D. A default VLAN must be created before it can be assigned a port
NEW QUESTION: 258

FIT AP can work independently without relying on AC. ()
A. True
B. False
NEW QUESTION: 259

On Huawei equipment, if AAA authentication is used for authorization, when the remote server
does not respond, authorization can be performed from the network equipment side ()
A. True
B. False
NEW QUESTION: 260
A. VAC
B. VT
C. VAP
D. TAP
NEW QUESTION: 261

Which of the following levels is not a common network level in mid-sized campus network
architecture?
A. Network layer
B. Access layer
C. Convergence layer
D. Core layer
NEW QUESTION: 262

Neither the A1 ternate interface nor the Backup port in RSTP can forward user traffic, nor can
they receive, process, and forward BPDUs ()
A. False
B. True
NEW QUESTION: 263

As shown in the figure, you only need to configure this static route on R1, and the two hosts can
communicate with each other normally.
A. True
B. False
NEW QUESTION: 264

As shown in the figure below. Which port of the following switches will be blocked? () (Single-
choice question)
A. G0/0/3 of SWB
B. SWC's G0/0/2
C. SWC's G0/0/1
D. SWA's G0/0/3
NEW QUESTION: 265
Which of the following cannot be the length of the IPv4 packet header? ()
A. 60B
B. 20B
C. 64B
D. 32B
NEW QUESTION: 266

Which of the following statements about Prefix Segment is wrong? ()
A. Prefix Segmont needs to be configured manually
B. Prefix Segment spreads to other network elements through the IGP protocol, which is globally
visible and effective
C. Prefix Segment is used to identify a destination address prefix in the network (Prefix)
D. Prefix Segment can be automatically allocated by IGP
NEW QUESTION: 267

About the above configuration command is correct ()
A. Modify the permission level of the save command in the user view to 3
B. Modify the limit level of the save command used by a user to 3
C. Modify the permission level of the user view command to 3, and save the matching sinus
D. Modify the user's authority level to 3. And save the configuration
NEW QUESTION: 268

STA. The only way to discover the wireless network is the Beacom frame sent by the AP. ()
A. True
B. False
NEW QUESTION: 269

Which of the following parameters cannot be used for advanced access control lists? ()
A. Destination port number
B. Agreement number
C. time limit
D. Physical interface
NEW QUESTION: 270

A. True
B. False
NEW QUESTION: 271

As shown in the figure, the administrator hopes that all hosts cannot access the Internet from
8:00 to
17:00 every day. Which ACL rule needs to be bound to traffic-filter outbound in the interface
configuration of G0/0/1? () (Single-choice question)
A. time-range am9 to pm5 07:00 to 18:00 daily # Acl number 2002 Rule 5 permit time-range am9
to pm5 #
B. time-range am9 to pm5 08:00 to 17:00 working-day # Ac1 number 2003 Rule 5 deny time-
range am9 to pm560 H12-811HCIA-Datacom655 new question bank#
C. time-range am9 to pm5 08:00 to 17:00 off-day # Acl number 2004 Rule 5 permit time-range
am9 to pm5
D. time-range am9 to pm5 08:00 to 17:00 daily # Acl number 2001 Rule 5 deny time-range am9
to pm5 #
NEW QUESTION: 272

All four switches run STP, and various parameters adopt default values. If the G0/0/2 port of
switch C is blocked and the configuration BPDU cannot be sent through this port, how long will
the blocked port in the network enter the forwarding state ()
A. About 30 seconds
B. About 3 seconds
C. About 15 seconds
D. About 50 seconds
NEW QUESTION: 273
When using the ping command on the VRp platform, if you need to specify an IP address as the
source address of the echo request message, which of the following parameters should be used?
()
A. =-S
B. =-a
C. =-1n
D. =-d
NEW QUESTION: 274

Which of the following methods can read data non-blocking in Python's telnetliB.? ()
A. telnet._read_eager
B. telnet_Read_all
C. telnet_read_very_lazy
D. telnet_reaD._very_eager
NEW QUESTION: 275

The output information of a certain router is shown in the figure. Which of the following statements
are correct? () (Multiple Choice Questions)
A. The DR priority of this routing interface is 10

B. The cost value of this interface is 1
C. This router is BDR
D. The Router ID of the router is 10.0.1.1
NEW QUESTION: 276
The vty distribution responsibility is shown in the figure, and the user authority level is set to level
3.
()
Huaveiuser-interface vty o 14 Huavei-ul-vtyo-14acl 200o inbound Huavei-ui-vtyo-14Juser Huavei-
ui-vtyo-14authentication-node passworD.
Please Configure the login privilegelevel 3 passvord (maxiu length 16): huavei
A. False
B. True
NEW QUESTION: 277

An existing switch is connected to a designated port through a port, but the port does not forward
any packets, but can monitor network changes by receiving BPDUs, then the role of the port
should be ().
A. DesignateD. port
B. Alternate port
C. Disable port
D. Root port
NEW QUESTION: 278

Which extension headers are supported by IPv6 packets?() *
A. Fragment extension header
B. Hop-by-hop option extension header
C. VLAN extension header
D. Destination option extension header
NEW QUESTION: 279

The following description about the specified port of the spanning tree is correct ()?
A. The port on the root switch must not be a designated port
B. The port on the root switch must be a designated port
C. The designated port can forward configuration BPDU packets to the network segment
connected to it
D. Each switch has only one designated port
NEW QUESTION: 280

The network is shown in the figure below. The router uses a sub-interface as the host gateway.
The gateway IP address is 10.0.12.2. Which of the following commands can achieve this
requirement? () (Multiple Choice Questions)
A. interface GigabitEthernet0/0/0.20Dotlq termination vid 20

Ip address10.0.12.2255.255.255.0Arp broadcast enable #
B. interface GigabitEtherneto/0/0.10Dotlq termination vid 20
Ip address10.0.12.2255.255.255.0Arp broadcast enable
C. interface GigabitEthernet0/0/0.20Dotlg termination vid 10
Ip address10.0.12.2255.255.255.0Arp broadcast enable
D. interface GigabitEthernet0/0/0.10Dotlq termination vid 10
Ip address10.0.12.2255.255.255.0 Arp broadcast enable #
NEW QUESTION: 281

If the value of the ypeLength field of an Ethernet data frame is 0x0800, the length of the upper
layer message header carried by this data frame is in the range of 20-60B. ()
A. False
B. True
NEW QUESTION: 282

Which of the following protocols is OSPF based on?
A. TCP
B. HTTP
C. UDP
D. IP
NEW QUESTION: 283

Which of the following statements about the election of DR and BDR are correct? ()*
A. BDR must exist in broadcast networks
B. DR must exist in broadcast networks
C. If the priority of an interface is, the interface will not participate in the election of DR or BDR
D. If the priority is the same, compare the Router ID, the larger the value, the more preferred to
be elected as the DR
NEW QUESTION: 284

VRP operating platform, which of the following commands can only view static routes? ()
A. display ip routing-table verbose
B. display ip routing-table protocol static
C. display ip routing-table
D. display ip routing-table statistics
NEW QUESTION: 285

The following description of the Layer 2 Ethernet switch is incorrect ().
A. Forward according to the Layer 2 header information of the Ethernet frame
B. Layer 2 Ethernet switch works at the data link layer
C. Need to make certain modifications to the layer 3 header of the forwarded message, and then
forward it
D. Able to learn MAC. Address
NEW QUESTION: 286

By default, the port cost calculated by STP has a certain relationship with the port bandwidth, that
is, the larger the bandwidth, the higher the cost ()
A. uncertain
B. Unanimous
C. Big
D. small
NEW QUESTION: 287

As shown in the broadcast network. 0SPF runs on four routers. And in the same area. Same
network segment. OSPF will automatically elect one DR and multiple BDRs to achieve a better
backup effect. ()(True or False)
A. False
B. True
NEW QUESTION: 288

When using the FTP protocol to upgrade the router software, the transmission mode should be
selected ()
A. Byte mode
B. Binary mode
C. Stream byte mode
D. Text mode
NEW QUESTION: 289

As shown in the figure. If host A has the ARp cache table of host B, then host A can ping host B.
()(True or False)
A. True
B. False
NEW QUESTION: 290

A. Hybrid port does not require PVID
B. When the Hybrid port sends data frames, it must carry the vlan tag
C. Hybrid port only receives data frames with VLAN tag
D. Hybrid port can strip off the tags of some vlan frames in the outgoing port direction
NEW QUESTION: 291

In the OSPF protocol, the correct one in the following description of DR is (). ()*
A. If the priority values of the two routers are different, the router with the smaller priority value is
selected as the DR
B. By default, all routers in this broadcast network will participate in the DR election
C. If the priority values of the two routers are equal, the router with the larger Router ID is
selected as the DR
D. Establish an adjacency relationship between DR and BDR
NEW QUESTION: 292

What kind of message does the 0SPF protocol use to request the locally missing LSA? ()
A. LSR
B. HELL0
C. LSACK
D. LSU
NEW QUESTION: 293

What is the maximum negotiation rate supported by the IEEE802.11g standard? ()
A. 150Mbps
B. 1200Mbps
C. 300Mbps
D. 54Kbps
NEW QUESTION: 294

Which of the following is not the reason why RSTP can increase the speed of convergence? ()
A. Forward.delay cancelled
B. Fast switching of the root port
C. The introduction of edge ports
D. P/A mechanism
NEW QUESTION: 295
On Huawei routers, what is the default value of the OSPF protocol internal routing priority? ()
A. 20
B. 10
C. 30
D. 0
NEW QUESTION: 296

What are the stable states of OSPF neighbor relationship? ()*
A. Down
B. Attempt
C. Full
D. 2-way
NEW QUESTION: 297

Which of the following IPv6 addresses is a multicast address? ()
A. 2000::2EO:FCFF:FEEF:FEC
B. FE80:2EO:FCFF:FEEF:FEC
C. FC0O:2EO:FCFF:FEEF:FEC
D. FF02::2EO:FCFF:FEEF:FEC
NEW QUESTION: 298

For switches running STP protocol, the port can be directly converted to the Disabled state in any
state.
A. True
B. False
NEW QUESTION: 299

FIT AP does not need AC. It can also work independently ()
A. True
B. False
NEW QUESTION: 300
A. 3000-3999
B. 6000
C. 4000
D. 2000-2999
NEW QUESTION: 301

By default, the bridge priority of Huawei switches is 32768.
A. False
B. True
NEW QUESTION: 302

Which of the following is not the reason why RSTP can increase the speed of convergence? ()
A. The introduction of edge ports
B. Fast switching of the root port
C. P/A. Mechanism
D. Forward.Delay cancelled
NEW QUESTION: 303

The Backup port in RSTP can replace the failed root port ()
A. True
B. False
NEW QUESTION: 304

DHCP is called Dynamic Host Configuration Protocol. It mainly assigns IP addresses and DNS
information to hosts automatically. The messages used are ()
A. Offer(Provided)
B. discover
C. ACK (acknowledgement)
D. request
NEW QUESTION: 305
In order to realize the network layer function on the VLANIF interface, do you need to configure it
on the VLANIF interface? ()
A. Subnet mask
B. IP address
C. IP prefix
D. MAC.Address
NEW QUESTION: 306

Which of the following statements about single-arm routing are correct? ()*
A. Only one physical link is used between the switch and the router to connect
B. One physical connection per vlan
C. On the switch, configure the port connected to the router as a Trunk port and allow the relevant
vlan frames to pass
D. Need to create a subinterface on the router
Answer: A,C,D (LEAVE A REPLY)
NEW QUESTION: 307

What is the priority value of the direct route entry? ()
A. 0
B. 20
C. 10
D. 30
NEW QUESTION: 308

Regarding the corresponding relationship between the access control list number and type, the
following description is correct ()
A. The number range of the second-level access control list is 4000-4999
B. Advanced access control list number range is 3000-4000
C. The number range of the interface-based access control list is1000-2000
D. The basic access control list number range is 1000-2999
NEW QUESTION: 309

Which NAT can convert multiple private network addresses into one public network address to
access the public network at the same time
A. Static NAT
B. Dynamic NAT
C. NAPT
D. Easy IP
NEW QUESTION: 310
A. Authentication protocol
B. MRU
C. IP address
D. Magic word
NEW QUESTION: 311

If the MAC address of an interface is 0OEO-FCEF-OFEC, what is its corresponding EUI-64
address? ()
A. 00EO-FCFF-FEEF-OFEC
B. 00EO-FCEF-FFFE-OFEC
C. 02EO-FCFF-FEEF-OFEC
D. 02EO-FCEF-FFFE-OFEC
NEW QUESTION: 312

There is no need to write a hop when writing static routes at both ends of the PPP link. The
Ethernet link needs
A. False
B. True
NEW QUESTION: 313

Both pwD. and dir commands in the VRP operating platform can view the file information in the
current directory, ()
A. True
B. False
NEW QUESTION: 314

Which of the following parameters need to be considered when electing a root port in STP? ()*
A. Duplex mode of the port
B. The cost of the port reaching the root switch
C. MAC address of E port
D. Port slot number, such as G0/0/1
E. Port priority
NEW QUESTION: 315

The router running the 0SPF protocol can reach the FULL state after completing the LSDB.
synchronization. ()
A. True
B. False
NEW QUESTION: 316

When two OSPF routers form a 2TAY neighbor relationship, LSDB. has been synchronized.
A. True
B. False
NEW QUESTION: 317

When AP and MC are in different Layer 3 networks, what method is recommended for AP to
discover AC?
A. Manually specified on AP
B. DHCP
C. Broadcasting method
D. DNS
NEW QUESTION: 318

The configuration information of a certain port of the switch is shown in the figure. Which of the
following statements is wrong? () interface GigabitEthernet0/0/1 port link type trunk port trunk
pviD.vlan 200 port trunk allow-pass vlan100#
A. The port type is Trunk type
B. If the port receives a data frame without VLAN TAG, the switch needs to add VLAN TAG 200
C. This port cannot send data frames carrying VLAN TAG200
D. If the VLAN TAG carried in the data frame is 100, the switch will strip off the VLAN TAG and
send it out
NEW QUESTION: 319

Among the configuration BPDUs sent by the switch, which bridge D. is unlikely to appear? ()
A. 000-01-02-03-04-CC
B. 819200-01-02-03-04-CC
C. 409600-01-02-03-04-CC
D. 204800-01-02-03-04-CC
NEW QUESTION: 320
A. True
B. False
NEW QUESTION: 321

Which of the following packet types is used by RADIUS to indicate authentication rejection? ()
A. Access-Reject
B. Access-Challenge
C. Access-Accept
D. Access-Request
NEW QUESTION: 322

On the VRP platform, the default protocol priority of routes in the direct route, static route,
RIP.OSPF area, from high to low, is ()
A. Direct route. OSPF. Static route. RIP
B. Direct route. OSPF. RIP. Static route
C. Direct route.Static route.RIP.OSPF
D. Direct route. RIP. Static route. OSPF
NEW QUESTION: 323

Which of the following interfaces are not open to Huawei controllers?
A. NETCONF
B. OpenFlow
C. AAA
D. RESTful
NEW QUESTION: 324

On the broadcast network, both DR and BDR use the multicast address 224.0.0.6 to receive link
state update messages ()
A. True
B. False
NEW QUESTION: 325

The mask length is 12 bits can be expressed as?
A. 255.255.255.0
B. 255.240.0.0
C. 255.248.0.0
D. 255.255.0.0
NEW QUESTION: 326

Which of the following options describes the concept of the IEV architecture correct? ()*
A. MANO is composed of NFVO.VNFN and VIM.
B. NFVO (NEV Orchestrator). Responsible for business orchestration.
C. VIM VirtualiseD.Infrastructure Manager) virtual resource management, responsible for the
virtualization of infrastructure.
D. VFM. Virtual network function management, responsible for the life cycle management of VNF.
NEW QUESTION: 327

In the broadcast network as shown in the figure, 0SPF runs on four routers. And in the same
area. The same network segment. SPF will automatically elect one DR and multiple BDRs to
achieve a better backup effect. ()(True or False)
A. False
B. True
NEW QUESTION: 328

At what layer of the OSI reference model does a router operate? ( )
A. Transport layer
B. Data link layer
C. Application layer
D. Network layer
NEW QUESTION: 329

The priority of OSPF routing protocol is ()
A. 10
B. 100
C. 60
D. 0
NEW QUESTION: 330
A. False
B. True
NEW QUESTION: 331

Which of the following fields is not included in the HELL0 packet of the OSPF protocol? ().
A. HelloInterval
B. Neighbor
C. Sysname
D. Network Mask
NEW QUESTION: 332

AAA. Which of the following is not included? ()
A. Authorization
B. Audit
C. Accounting
D. Authentication
NEW QUESTION: 333

System-view (huawei) command-privilege level3 view user save is correct about the above
configuration command ()
A. Modify the permission level of the user view command to 3, and save the configuration
B. Modify the authority level of the save command used by a user to 3
C. Modify the permission level of the save command in the user view to 3
D. Modify the user's authority level to 3, and save the configuration
NEW QUESTION: 334

In the network shown in the figure below, there are the following configurations in Router A.
Which of the following statements is correct?
ip route-statiC.10.0.2.2255.255.255.25510.0.12.2iP
Route-statiC.10.0.2.2255.255.255.25510.0.21.2pre ference 70
A. If the G0/0/2 port is Down, then Router A reaches 10.0.2.2. The route NextHop. is changed to
10.012.2
B. If the G0/0/1 port is Down, the route NextHap from Router A to 10.0.2.2 is changed to
10.0.21.2
C. The Next in the routing table of Router A reaches 10.0.2.2. Hop is 10.0.21.2
D. The Next in the routing table of Router A reaches 10.0.2.2. Hop is 10.0.12.2
Answer: B,D (LEAVE A REPLY)
NEW QUESTION: 335
The topology shown in the figure and the configuration on the interconnection ports of the switch.
Can it be judged that the data frame tagged as VLAN10 can be forwarded normally between the
two switches? ()(True or False)
(LSW1) interface GigabitEthernet 0/0/1

(LSW1-GigabitEthernet0/0/1) port link-type trunk
(LSW1-GigabitEthernet0/0/1) port trunk pvid vlan 20
(LSW1-GigabitEthernet0/0/1) port trunk allow-passvlan 10
#
(LSW2) interface GigabitEthernet 0/0/1
(LSW2-GigabitEthernet0/0/1) port link-type trunk
(LSW2-GigabitEthernet0/0/1 port trunk pvid vlan 10
(LSW2-GigabitEthernet0/0/1) port trunk allow-passvlan 10
A. True
B. False
NEW QUESTION: 336

Which of the following IPv6 addresses can be abbreviated as 2FFF DAC:ABEF:CDAA:732? ()
A. 2FFF:ODAC.:ABEF:0000:0000:0000:CDAA4:0732
B. 2FFF:ODAC:ABEF 0000:0000:CDAA:0732
C. 2FFF DACO:ABEF 0000000:0000:CDAA:0732
D. 2FFF:ODAC:ABEF:0000:0000:0000:CDAA:7320
NEW QUESTION: 337

Which of the following applications is based on the TCP protocol?()*
A. FTP
B. TFTP
C. Ping
D. HTTP
NEW QUESTION: 338

The origin of SDN is the separation of transfer and control. The separation of transfer and control
is a way to realize SDN, not the essence. ()
A. False
B. True
NEW QUESTION: 339

As name is admin and the password is Huawei (@123. The following is the correct way to log in
to this device using telnetliB. ()
A. telnetlib.Telnet (10.1.1.0, 23, admin, Huawei@123)
B. telnetlib.Telnet (10.1.1.0)
C. telnetlib.Telnet 10.1.1.0, 23, Huawei@123)
D. telnetlib.Telnet (10.1.1.0, admin
NEW QUESTION: 340

As shown in the figure below, what kind of network equipment can host A and host B use to
communicate? () (Single-choice question)
A. Hub
B. HUB
C. Layer 2 switch
D. router
NEW QUESTION: 341

The transport layer protocol has UDP and TCP, but UDP is more reliable than TCP
A. True
B. False
NEW QUESTION: 342

Which authorization modes are supported by AAA on Huawei ARG3 series routers? ()*
A. Not authorized
B. Authorization after successful RADIUS authentication
C. Local authorization
D. HWTACACS authorization
NEW QUESTION: 343

Link aggregation is a common technology in enterprise networks. Which of the following
descriptions are the advantages of link aggregation technology? ()
A. Improve reliability
B. Improve safety
C. Increase bandwidth
D. Achieve load sharing
NEW QUESTION: 344

The tracert diagnostic tool in Huawei routers is used to track the data forwarding path. ()
A. True
B. False
NEW QUESTION: 345

The function of the 0SPF hel1o message is ()
A. Neighbor discovery
B. Synchronize the LSDB of the router
C. Maintain neighbor relations
D. Update LSA. Information
NEW QUESTION: 346

Which of the following are not the characteristics of a small campus network? ()
A. Simple network requirements
B. Single network level
C. Wide coverage
D. Low number of users
NEW QUESTION: 347

In IPv4 network, AP supports static and DHCP to obtain IP address ()
A. True
B. False
NEW QUESTION: 348

The configuration of the country code will affect the frequency used for actual transmission and
the maximum transmission power. ()
A. True
B. False
NEW QUESTION: 349

The following statement about static routing is wrong ()
A. Routers need to exchange routing information
B. Low system performance requirements
C. Cannot automatically adapt to changes in network topology
D. Manual configuration by network administrator
NEW QUESTION: 350
A. 1, 2, 3, 4.6, 100
B. 1, 2.3, 100
C. 2, 3, 100
D. 2.3, 4, 6, 100
NEW QUESTION: 351

Under the command line interface of Huawei AR router, the save command is used to save the
current system time.
A. True
B. False
NEW QUESTION: 352
As shown in the figure below. All hosts can communicate normally. Which of the following
statements are correct? () (Multiple Choice Questions)
A. SWA's G0/0/3 learned 1 mac address

B. SWA's G0/0/3 learned 2 mac addresses
C. G0/0/3 of SWB learned 2 mac addresses
D. SWA's G0/0/3 learned 3 mac addresses
NEW QUESTION: 353

The administrator wants to allocate a Hundred P address on the G0/0/0 interface of the router.
Which of the following addresses is correct? ()
A. 127.3.1.4/28
B. 145.4.2.55/26
C. 192.168.10.112/30
D. 237.6.1.2/24
NEW QUESTION: 354

Telnetlib is a module that implements the Telnet protocol that comes with Python ()
A. True
B. False
NEW QUESTION: 355

As shown in the figure below, which of the following statements is correct? () (Single-choice
question)
A. The IP address mask b of host A and host B are different. Therefore, host A and host B cannot
communicate
B. Only if the masks of host A and host B are set to be the same, host A and host B can
communicate
C. Host A can ping host B
D. The broadcast address of host A and host B are the same
NEW QUESTION: 356

What is the total length of the VLAN frame format defined by IEEE802.1Q? ()
A. 2
B. 3
C. 1
D. 4

Huawei.H12-811.v2024-10-07.q356

Uploaded by

Copyright:

Available Formats

Huawei.H12-811.v2024-10-07.q356

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Huawei.H12-811.v2024-10-07.q356

Uploaded by

Copyright:

Available Formats

Huawei.H12-811.v2024-10-07.

Exam Code: H12-811

A. Enable OSPF protocol under G0/0/1 interface

A. Host A and Host B cannot ping through

A. The router will discard packets whose destination network is 11.0.0.0/8

A. Forward this data frame from the Eth0/0/2 port

A. SWA is the root bridge in this network

A. The interface address of this router is 10.0.12.2

A. G0/0/3 and G0/0/2

NEW QUESTION: 100

NEW QUESTION: 101

NEW QUESTION: 102

NEW QUESTION: 103

NEW QUESTION: 105

NEW QUESTION: 106

NEW QUESTION: 107

NEW QUESTION: 108

NEW QUESTION: 109

NEW QUESTION: 110

NEW QUESTION: 111

NEW QUESTION: 112

NEW QUESTION: 113

NEW QUESTION: 114

NEW QUESTION: 115

NEW QUESTION: 116

NEW QUESTION: 117

NEW QUESTION: 118

NEW QUESTION: 119

NEW QUESTION: 120

NEW QUESTION: 121

NEW QUESTION: 122

NEW QUESTION: 123

NEW QUESTION: 124

NEW QUESTION: 125

NEW QUESTION: 126

A. dhcp select relay

NEW QUESTION: 127

NEW QUESTION: 128

A. The neighbor relationship between the two routers will be down

NEW QUESTION: 130

NEW QUESTION: 131

NEW QUESTION: 132

A. SWB forwards TCN BPDU to SWA

NEW QUESTION: 133

NEW QUESTION: 134

NEW QUESTION: 135

NEW QUESTION: 136

NEW QUESTION: 137

NEW QUESTION: 138

NEW QUESTION: 139

NEW QUESTION: 140

NEW QUESTION: 141

NEW QUESTION: 142

NEW QUESTION: 143

A. Host A and Host B cannot obtain each other's MAC address

NEW QUESTION: 144

NEW QUESTION: 145

NEW QUESTION: 146

NEW QUESTION: 147

NEW QUESTION: 148