Huawei HCNA-HNTD (H12-211) Chinese Test Bank

Huawei HCNA-HNTD (H12-211) Chinese test bank
Number: 12-211
Passing Score: 600
Time Limit: 120 min
File Version: 2.2
Huawei question database battle report group: 434299778 Huawei Certification Question Database Battle Report Area
http://bbs.hh010.com/forum-huawei-1.html Download the official genuine question bank, watch the latest test report, please
pay attention to the Hongjun Forum http://bbs.hh010.com Cisco Huawei exam registration for national discount, please
contact Hongjun national customer service for registration
QQ 613523101
QQ 613523103
QQ 613523105
QQ 613523107
QQ 613523108
QQ 613523109
Hongjun Forum official Taobao shop: http://hh010.taobao.com/
Hongyi Forum official WeChat public number:
华为题库战报群：434299778
Exam A
QUESTION 1
1.Refer to the following DHCP flowchart, the following statement is correct (). (multiple choice)
A. The first step is to send a multicast packet.

B. The second step is to send a unicast message.
C. The third step is to send a broadcast message.
D. The fourth step is to send a unicast message.
E. The fourth step is to send a broadcast message.
Correct Answer: BCD

Section: (none)
Explanation
Explanation/Reference:
QUESTION 2
2.Two authentication domains, Area1 and Area2, are configured on the authentication server. If
the user is authenticated with the correct username huawei and the password hello, the user is
assigned to which authentication domain. ?
A. Authentication domain "Area1"

B. Authentication domain "Area2"
C. Authentication domain "default domain"
D. Authentication domain "default_admin domain"
Correct Answer: C
Section: (none)
Explanation
QUESTION 3
3.Under the RIP process of the Huawei device, when the network 10.1.1.1/30 is announced, the
following configuration is correct (). (multiple choice)
A. network 10.1.1.0
B. undo summary network 10.1.1.0
C. Version 2 summary network 10.0.0.0
D. undo summary network 10.1.0.0
E. network 10.0.0.0
Correct Answer: CE
Section: (none)
Explanation
QUESTION 4
4.The login timeout time in the VRP system needs to be configured on the VTY interface
A. Correct
B. Error
Correct Answer: A
Section: (none)
Explanation
QUESTION 5
5.NAPT distinguishes the IP addresses of different users by the protocol number in TCP or UDP
or IP packets.
A. Correct
B. Error
Correct Answer: B
Section: (none)
Explanation
QUESTION 6
6.There are two routers RTA and RTB between the source device and the destination device. Use
the Tracert command to check the path. When the first hop RTA is checked, the source device
sends a UDP packet with a TTL of 1 to a larger port of the destination device. When the
packet reaches the RTB, the TTL will be 0, and the RTA responds to the source device. ICMP( )
message.
A. Time Exceeded
B. Echo Request
C. Echo Reply
D. Port Unreachable
Correct Answer: A
Section: (none)
Explanation
QUESTION 7
7.Regarding the correspondence between the access control list number and the type, the
following description is correct ().
Huawei question database battle report group: 434299778

A. The basic access control list number range is 1000-2999
B. Advanced access control list number range is 3000-9000
C. The basic access control list number range is 4000-4999
D. The basic access control list number range is 1000-2000
Correct Answer: C
Section: (none)
Explanation
QUESTION 8
8.The following two configuration commands can be used to implement the router's RTA to go to
the same destination as the primary destination 10.1.1.0:
[RTA]ip route-static 10.1.1.0 24 12.1.1.1 permanent
[RTA]ip route-static 10.1.1.0 24 13.1.1.1
A. Correct
B. Error
Correct Answer: B
Section: (none)
Explanation
QUESTION 9
9.The ACL does not filter the traffic that the device itself generates to access other
devices. It only filters the forwarded traffic. The forwarded traffic includes traffic that
other devices access the device
A. Correct
B. Error
Correct Answer: A
Section: (none)
Explanation
QUESTION 10
10.The following description of static and dynamic routing errors is ().
A. Static routing is simple to configure and easy to manage when applied in an enterprise.
B. After administrators deploy dynamic routing protocols in the enterprise network, post-
maintenance and expansion can be more convenient.
C. Static routes can automatically complete network convergence after a link fails.
D. Dynamic routing protocols take up more system resources than static routes
Correct Answer: C
Section: (none)
Explanation
QUESTION 11
11.Referring to the following topology and configuration, routers R1 and R2 are connected
through a Serial low-speed cable, and the data link layer uses PPP. When the Holdtimes of
R1 and R2 are inconsistent, ARP negotiation fails and communication cannot be performed.
A. Correct
B. Error
Correct Answer: B
Section: (none)
Explanation
QUESTION 12
12.The network administrator uses the ping command on the AR G3 series router to test
connectivity to 10.0.0.2. The correct description of the output below is ().
PING 10.0.0.2: 800 data bytes, press CTRL_C to break
Reply from 10.0.0.2: bytes=800 Sequence=1 ttl=255 time=40 ms
Reply from 10.0.0.2: bytes=800 Sequence=2 ttl=255 time=30 ms
--- 10.0.0.2 ping statistics ---

2 packet(s) transmitted
2 packet(s) received
0.00% packet loss
round-trip min/avg/max = 30/35/40 ms
A. The command used by the network administrator is ping -c 2 -s 800 10.0.0.2

B. The command used by the network administrator is ping -a 2 -v 800 10.0.0.2
C. Destination address 10.0.0.2 is unreachable
D. The network administrator modified the default TTL value to 255.
Correct Answer: A
Section: (none)
Explanation
Huawei question database battle report group: 434299778

QUESTION 13
13.The network administrator configures the RIPng protocol on a small IPv6 network. Which of
the following configurations is correct and effective?
A. [RTA-GigabitEthernet0/0/0]ripng 1 enable
B. [RTA]ripng 1 enable
C. <RTA>ripng 1 enable
D. [RTA-ripng-1]ripng 1 enable
Correct Answer: A
Section: (none)
Explanation
QUESTION 14
14.Which of the following features is no longer supported by OSPFv3 on an IPv6 network?
A. Multi-regional division
B. Router-ID
C. Authentication function
D. Send protocol packets in multicast mode
Correct Answer: C
Section: (none)
Explanation
QUESTION 15
15.On the VRP platform, the command to set the encapsulation type of the data link layer of
the serial interface to HDLC is ().
A. encapsulation hdlc
B. link-protocol hdlc
C. hdlc enable
D. link-protocol ppp
Correct Answer: B
Section: (none)
Explanation
QUESTION 16
16.The necessary technology to enable a host with an IP address of 10.0.0.1 to access the
Internet is ().
A. Static routing
B. Dynamic routing
C. Route introduction
D. NAT
Correct Answer: D
Section: (none)
Explanation
QUESTION 17
17.Which version of the SNMP protocol supports encryption features?
A. SNMPv1
B. SNMPv2
C. SNMPv2c
D. SNMPv3
Correct Answer: D
Section: (none)
Explanation
QUESTION 18
18.In the STP protocol, assume that all switches have the same priority. The MAC address of switch 1 is 00-e0-fc-00-00-
40, and the MAC address of switch 2 is 00-e0-fc-00-00-10. The MAC address of switch 3 is 00-e0-fc-00-00-20, and the
MAC address of switch 4 is 00-e0-fc-00-00-80, then the root switch should be ().
A. Switch 1
B. Switch 2
C. Switch 3
D. Switch 4
Correct Answer: B
Section: (none)
Explanation
QUESTION 19
19.As shown in the figure, the network administrator creates VLAN 2 on the SWA and SWB, and
configures the ports connected to the host on the two switches as access ports and assigns
them to VLAN 2. Configure G0/0/1 of SWA and G0/0/2 of SWB as trunk ports to allow all VLANs
to pass. To achieve normal communication between the two hosts, you need ().
A. Create VLAN2 on SWC.

B. Configure G0/0/1 on the SWC as the trunk port and allow VLAN 2 to pass.
C. Configure G0/0/1 and G0/0/2 on the SWC as trunk ports and allow VLAN 2 to pass.
D. Create VLAN 2 on the SWC, configure G0/0/1 and G0/0/2 as trunk ports, and allow
VLAN 2 to pass.
Correct Answer: D
Section: (none)
Explanation
QUESTION 20
20.When upgrading the router software using the FTP protocol, the transfer mode should be
selected ().
A. Binary mode
B. Streaming byte mode
C. Byte mode
D. Text mode
Correct Answer: A
Section: (none)
Explanation
QUESTION 21
21.The error about the above configuration command is ().
<Huawei>system-view
[Huawei]user-interface console 0
[Huawei-ui-console0]user privilege level 15
[Huawei-ui-console0] authentication-mode password
[Huawei-ui-console0]set authentication password cipher
huawei2012 [Huawei-ui-console0]quit
A. The administrator wants to log in and manage the device through the console port.
B. After the configuration is completed, the administrator cannot implement device
management through remote login.
C. The user who logs in to the device through the console has the highest user
privilege level.
D. The user password for logging in to the device through the console is "cipher
huawei2012".
Correct Answer: D
Section: (none)
Explanation
QUESTION 22
22.In order to check whether the serial port S0/0/1 on the router is a DTE interface or a
DCE interface, which of the following commands should be used?
A. display controller serial

B. display saved-config
C. display interface s0/0/1
D. display current-config
Correct Answer: C
Section: (none)
Explanation
QUESTION 23
23.In the OSI reference model, the ability to perform end-to-end error detection and flow control is ().
A. Physical layer
B. Data link layer
C. Network layer
D. Transport layer
Correct Answer: D
Section: (none)
Explanation
QUESTION 24
24.When the specified interface is running in RIPv2 multicast mode, the following statement
is correct (). (multiple choice)
A. Receive only RIPv2 multicast packets.

B. Do not receive RIPv1 broadcast packets.
C. Receive RIPv1 broadcast messages
D. Receive RIPv1 multicast packets
Correct Answer: AB
Section: (none)
Explanation
QUESTION 25
25.A port in the discarding state of RSTP can discard the received data frame, but maintain the MAC address table
according to the data frame received by the port.
A. Correct
B. Error
Correct Answer: B
Section: (none)
Explanation
QUESTION 26
26.When using the Tracert program to test the path through which the target node passes, the default is to count () times
for each Traceroute.
A. 3
B. 4
C. 6
D. 8
Correct Answer: A
Section: (none)
Explanation
QUESTION 27
27.As shown in the figure, the network administrator wants to manually aggregate the two
physical links between the SWA and the SWB into one Eth-Trunk link. The correct description
is ().
A. It works normally after aggregation

B. Can be aggregated, only GE port can be used after aggregation
C. Can be aggregated, only Ethernet port can be used after aggregation
D. Can not be aggregated
Correct Answer: D
Section: (none)
Explanation
QUESTION 28
28.As shown in the figure, the administrator configured the following command on the RTA,
and the correct description is (). (multiple choice)
[RTA-Serial0/0/1]rip output
[RTA-rip-1]silent-interface s0/0/1
A. RTA can still learn the routing information published by RTB.

B. RTB can still learn the routing information published by RTB.
C. RTA does not include RTB in the neighbor information.
D. RTB neighbor information does not include RTA
Correct Answer: AD
Section: (none)
Explanation
QUESTION 29
29.The above is the display startup information of the AR2200 router. For this information, the
error is ().
A. The running configuration file is not saved

B. When the device starts using the system file, ar2220-v200r003c00spc200.cc
C. The system file cannot be modified when the device starts next time.
D. The system file of the next startup of the device can be modified by using the command
"startup system software<startup-software-name>.cc".
Correct Answer: C
Section: (none)
Explanation
QUESTION 30
30.The following static route configuration is correct (). (multiple choice)
A. ip route-static 129.1.0.0 16 serial 0

B. ip route-static 10.0.0.2 16 129.1.0.0
C. ip route-static 129.1.0.0 16 10.0.0.2
D. ip route-static 129.1.0.0 255.255.0.0 10.0.0.2
Correct Answer: ACD

Section: (none)
Explanation
QUESTION 31
31. A switch receives a data frame with a VLAN tag, but finds that the MAC address of the data
frame cannot be queried in its MAC address table. The switch processes the data frame by ().
A. The switch broadcasts the data frame to all ports.
B. The switch broadcasts this data frame to all ports (except the receiving port) in the VLAN that belongs to the data
frame.
C. The switch broadcasts this data frame to all access ports.
D. The switch will drop this data frame
Correct Answer: B
Section: (none)
Explanation
QUESTION 32
32. The network administrator has captured a data frame in the network with the destination MAC
address of 01-00-5E-A0-B1-C3. The correct statement about the MAC address is ().
A. It is a unicast MAC address
B. It is a broadcast MAC address
C. It is a multicast MAC address
D. It is an illegal MAC address
Correct Answer: C
Section: (none)
Explanation
QUESTION 33
33.As shown in the configuration, if the administrator configures OSPF on R1 but R1 cannot
learn the routes of other routers, the possible cause is (). (multiple choice)
[R1]ospf
[R1-ospf-1]area 1
[R1-ospf-1-area-0.0.0.1]network 10.0.12.0 0.0.0.255
A. The area ID configured by this router is different from the area ID of its neighbor router.
B. The router is not configured with authentication, but the neighbor router is configured
with authentication.
C. The OSPF process ID is not configured when this router is configured.
D. This router does not announce the network connecting neighbors when configuring OSPF.
Correct Answer: ABD

Section: (none)
Explanation
QUESTION 34
34. As shown in the figure, the ports connected to the host by SWA and SWB are both Access
ports and the PVID is 2. G0/0/1 of the SWA is a Hybrid port with a PVID of 1, and the port hybird
tagged vlan 2 command is configured. G0/0/1 of the SWB is a trunk port with a PVID of 1, and
VLAN 2 is allowed to pass. The correct one in the following description is ().
A. Host A can send a data frame to Host B but cannot receive a reply from Host B.
B. Host A cannot send data frames to Host B but can receive data frames sent by Host B.
C. Host A and host B cannot communicate at all.
D. Host A and host B can communicate normally
Correct Answer: D
Section: (none)
Explanation
QUESTION 35
35. As shown in the figure, regarding the frame relay device, the following description is correct (). (multiple
choice)
A. RTA is a DTE device
B. FRA is a DTE device
C. FRB is a DCE device
D. The S1/0/1 interface on the RTA is the DCE interface.
Correct Answer: AC
Section: (none)
Explanation
QUESTION 36
36. When STP is running on Huawei Sx7 series switches, the priority of the switch is () by default.
A. 4096
B. 8192
C. 16384
D. 32768
Correct Answer: D
Section: (none)
Explanation
QUESTION 37
37. The ARP protocol can resolve the MAC address of the target device according to the destination IP address, so
as to map the link layer address and the IP address.
A. Correct
B. Error
Correct Answer: A
Section: (none)
Explanation
QUESTION 38
38. An access port can only send and receive untagged frames. When receiving a data frame with a tag, it will
directly discard it.
A. Correct
B. Error
Correct Answer: B
Section: (none)
Explanation
QUESTION 39
39. The following is a description of the Forwarding state description error in the spanning tree protocol ().
A. Forwarding port can receive BPDUs.
B. Forwarding state port does not learn the source MAC address of the packet.
C. Forwarding state port can forward data packets.
D. Forwarding port can send BPDUs.
Correct Answer: B
Section: (none)
Explanation
QUESTION 40
40. What is the encryption algorithm used by CHAP in PPP?
A. DES
B. MD5
C. AES
D. Do not use encryption algorithms
Correct Answer: B
Section: (none)
Explanation
QUESTION 41
41. The following analysis of ICMP messages is correct (). (multiple choice)
A. ICMP messages can record time, including original time, receiving time, and sending time.
B. ICMP packets are encapsulated in IP packets without being encapsulated in the transport layer.
C. ICMP packets protect ICMP error packets, control packets, request/response packets, and refresh packets.
D. ICMP does not support redirection
E. ICMP packets cannot be used to detect MTUs in a path.
Correct Answer: BC
Section: (none)
Explanation
QUESTION 42
42. As shown in the figure, it can be judged that 00e0-fc99-9999 is a specific host MAC address
learned by the switch through ARP, and the host has changed the IP address three times.
A. Correct
B. Error
Correct Answer: B
Section: (none)
Explanation
QUESTION 43
43. Which elements can NAPT convert?
A. MAC address + port number
B. IP address + port number
C. Only MAC address
D. Only IP address
Correct Answer: B
Section: (none)
Explanation
QUESTION 44
44. As shown in the figure, both ports GE0/0/1 and GE0/0/2 have different Hybrid configurations.
The correct statement is (). (multiple choice)
A. The administrative department and the finance department cannot visit each other because the VLANs
belonging to the two departments are different.
B. The data frame sent by the administrative department carries the tag in the switch as VLAN20.
C. The data frame sent by the finance department carries the tag in the switch as VLAN20.
D. The switch here can be a Layer 2 switch or a Layer 3 switch because communication does not need to go
through a Layer 3 gateway.
E. If both ports GE0/0/1 and GE0/0/2 of the switch are modified to be trunk ports, the two departments can
communicate normally.
Correct Answer: CD
Section: (none)
Explanation
QUESTION 45
45. The following is true about the OSPF area description (). (multiple choice)
A. Configure the ip address of the loopback interface of the router before configuring the OSPF area.
B. The area number range is from 0.0.0.0 to 255.255.255.255
C. The number of the backbone area cannot be 2
D. All networks should be announced in Area 0
Correct Answer: BC
Section: (none)
Explanation
QUESTION 46
46. Which of the following parameters should be considered when electing a root port in STP? (multiple choice)
A. 端口到达根交换机的 Cost
B. 端口优先级
C. 端口槽位编号，如 G0/0/1
D. 端口的 MAC 地址
E. 端口的双工模式
Correct Answer: ABC

Section: (none)
Explanation
QUESTION 47
47. The following statement about the working mode of the Ethernet port is correct? (multiple
choice)
A. Gigabit Ethernet can only work in full-duplex mode
B. 10 Gigabit Ethernet can only work in full duplex mode
C. The Ethernet port mode works normally when it does not match.
D. Ethernet port mode can be considered as defined
E. 100M Ethernet port working mode supports full duplex and half duplex
Correct Answer: DE
Section: (none)
Explanation
QUESTION 48
48. When the administrator configures the DHCP server, which of the following commands configures the lease
time to be the shortest?
Ip pool pool1
network 10.10.10.0 mask 255.255.255.0
gateway-list 10.10.10.1
A. dhcp select
B. lease day 1
C. lease 24
D. lease 0
Correct Answer: B
Section: (none)
Explanation
QUESTION 49
49. You can use the vlan batch command to create multiple VLANs in batches on the Huawei
switch to simplify the configuration process.
A. Correct
B. Error
Correct Answer: A
Section: (none)
Explanation
QUESTION 50
50. As shown in the figure, the administrator wants to improve the performance of this network. Which of the
following is most appropriate?
A. Use the switch to connect each host and change the working mode of each host to full duplex.
B. Use a switch to connect each host and change the working mode of each host to half duplex.
C. Connect each host with HUB and change the working mode of each host to full duplex.
D. Connect each host with the HUB and change the working mode of each host to half duplex.
Correct Answer: A
Section: (none)
Explanation
QUESTION 51
51. Which of the following OSPF versions is for IPv6?
A. OSPFv1
B. OSPFv2
C. OSPFv3
D. OSPFv4
Correct Answer: C
Section: (none)
Explanation
QUESTION 52
52. In the network as shown, the following description is correct (). (multiple choice)
A. The same collision domain between RTA and SWC
B. The same broadcast domain between SWA and SWB
C. SWA and SWC are both a collision domain
D. SWA and SWC are both a broadcast domain
Correct Answer: CD
Section: (none)
Explanation
QUESTION 53
53. When the route has a loop, which of the following problems may occur? (multiple choice 2)
A. Packets are passed endlessly
B. Increased CPU consumption of the router
C. Increased memory consumption of the router
D. The destination IP address of the packet is constantly modified.
E. The number of bytes in the packet is getting bigger and bigger
Correct Answer: BC
Section: (none)
Explanation
QUESTION 54
54. The network structure and OSPF partition are shown in the figure. In addition to R1, routers
R2, R3 and R4 are OSPF ABR routers.
A. Correct
B. Error
Correct Answer: B
Section: (none)
Explanation
QUESTION 55
55. The network structure and OSPF partition are shown in the figure. In addition to R1, routers R2, R3 and R4 are
OSPF ABR routers. The two routers are running on the PPP link. The administrator configures OSPF single areas
on the two routers, and their router IDs are the same. The following description is correct ().
A. Two routers will establish a normal full neighbor relationship
B. VRP will prompt the router ID conflicts between the two routers.
C. Two routers will establish a normal full adjacency
D. Two routers will not send hello messages to each other.
Correct Answer: B
Section: (none)
Explanation
QUESTION 56
56. The company has users who report that when using the network to transfer files, the speed is very low. The
administrator uses the Wireshark software to capture packets in the network and finds some duplicate frames. The
following is the correct reason or solution description ().
A. When the switch cannot find the destination MAC address of the data frame in the MAC address table, the switch
will flood the data frame.
B. The switching equipment of the company network must be upgraded
C. The network has a loop on the second floor.
D. No VLAN is configured in the network.
Correct Answer: C
Section: (none)
Explanation
QUESTION 57
57. After the GRE keepalive function is enabled, the local end of the GRE tunnel periodically sends a keepalive
packet to the peer every 10 s.
A. Correct
B. Error
Correct Answer: B
Section: (none)
Explanation
QUESTION 58
58. Regarding PPP configuration and deployment, the following statement is correct ().
A. PPP cannot be used to deliver IP addresses.
B. PPP supports CHAP and PAP authentication methods.
C. PPP cannot modify keepalive time
D. PPP does not support mutual authentication
Correct Answer: B
Section: (none)
Explanation
QUESTION 59
59. Regarding the above configuration, the correct statement is ().<Huawei>system-view
[Huawei]user-interface console 0
[huawei-ui-console0]history-command max-size 20
A. history-command max-size 20 is to adjust the history command cache size to 20

B. The default size of the history command cache is 5
C. The default size of the history command cache is 5 bytes.
D. After the above configuration is completed, the history command cache can save 20 bytes of
commands.
Correct Answer: A
Section: (none)
Explanation
QUESTION 60
60. Regarding the command used to detect IP network connectivity, the following statement is wrong (). (multiple
choice)
A. ping 127.0.0.1, this command is used to check whether the host's network cable is plugged in.
B. ping 127.0.0.2, this command is used to check whether the host's network cable is plugged in.
C. The ping command can be used to detect the connectivity of the host to the local gateway.
D. The ipconfig/release command can be used to detect the connectivity of the host to the local
gateway
Correct Answer: ABD

Section: (none)
Explanation
QUESTION 61
61. There is a TTL field in the IP packet header. The correct statement about this field is ()
A. The length of this field is 7 digits.
B. This field is used for packet fragmentation.
C. This field is used for packet anti-ring
D. This field is used to prioritize the packet data packet.
Correct Answer: C
Section: (none)
Explanation
QUESTION 62
62. As shown in the figure, the two hosts implement inter-VLAN communication through one-arm routing. When the
G0/0/1.2 sub-interface of the RTA receives the data frame sent by Host B to Host A, which of the following
operations does the RTA perform?
A. RTA forwards the data frame directly through the G0/0/1.1 subinterface.
B. After the RTA deletes the VLAN tag 20, it is sent out by the G0/0/1.1 interface.
C. RTA first deletes VLAN tag 20, then adds VLAN tag 10, and then sends it out through G0/0/1.1 interface.
D. RTA will discard the data frame
Correct Answer: C
Section: (none)
Explanation
QUESTION 63
63. As shown in the following figure and the configuration on the switch interconnect port, you can determine that
the data frame labeled as VLAN 10 can be forwarded normally between the two switches.
A. Correct
B. Error
Correct Answer: B
Section: (none)
Explanation
QUESTION 64
64. In the OSPF protocol, what are the correct ones for the description of DR? (multiple choice)
A. By default, all routers in this broadcast network will jointly vote with DR
B. If the priority values of the two routers are different, select the router with the smaller priority value as the DR.
C. If the priority values of the two routers are equal, select the router with the large router ID as the DR.
D. Adjacency must also be established between DR and BDR.
Correct Answer: ACD

Section: (none)
Explanation
QUESTION 65
65. Administrators can't manage the AR2200 through Telent. If other administrators are found to have no problems
during troubleshooting, which of the following options are possible? (choose 2 answers)
A. The admin user account has been disabled

B. The privilege level of the admin user account has been modified to 0
C. The admin user account has been deleted
D. The telnet service of the AR2200 router has been disabled.
Correct Answer: AC
Section: (none)
Explanation
QUESTION 66
66. The correct description of GVRP below is ().
A. GVRP enables dynamic discovery and deletion of network devices
B. GVRP is a protocol that must be enabled on the switch, otherwise the switches cannot
communicate with each other.
C. GVRP is based on the GARP working mechanism and is used to maintain VLAN dynamic
registration information in the device and propagate the information to other devices.
D. GVRP is enabled by default, or can be manually closed
Correct Answer: C
Section: (none)
Explanation
QUESTION 67
67. Which of the following subnet routes can the route entry 10.0.0.24/29 be aggregated from? (multiple choice)
A. 10.0.0.24/30
B. 10.0.0.23/30
C. 10.0.0.26/30
D. 10.0.0.28/30
Correct Answer: AD
Section: (none)
Explanation
QUESTION 68
68. The network administrator created VLAN 10 on the Layer 3 switch and configured the IP
address on the virtual interface of the VLAN. When using life After the display ip interface brief is
displayed, the VLANIF 10 interface is down. If the VLANIF 10 interface is down, what should be
done to make the VLANIF 10 interface return to normal?
A. Use the command "undoubtedly shutdown" on the VLANIF 10 interface.
B. Add any physical interface into VLAN 10
C. Add a physical interface whose status must be UP to VLAN 10.
D. Add an interface that must be UP and must be a trunk type into VLAN 10.
Correct Answer: C
Section: (none)
Explanation
QUESTION 69
69. As shown in the figure, the correct description of this network topology is ().
A. There are 6 collision domains in this network.
B. There are 2 broadcast domains in this network.
C. There is 1 conflict domain in this network
D. There are 6 broadcast domains in this network
Correct Answer: B
Section: (none)
Explanation
QUESTION 70
70. On a multi-access network such as Ethernet, a PPPoE server can establish a PPP
connection with many PPPoE clients through an Ethernet port, so the server must establish a
unique session identifier for each PPP session to distinguish between different connections.
What parameters does PPPoE use to establish a session identifier?
A. MAC address
B. IP address and MAC address
C. MAC address and PPP-ID
D. MAC address and Session-ID
Correct Answer: D
Section: (none)
Explanation
QUESTION 71
71. The authentication scheme, authorization scheme, accounting scheme, HWTACACS, or RADIUS server
template created on the AR router can take effect only after it is applied in the domain.
A. Correct
B. Error
Correct Answer: A
Section: (none)
Explanation
QUESTION 72
72. Which of the following fields in the packet shown will be encrypted by the ESP protocol of IPsec VPN?
A. TCP Header，Data，ESP Trailer

B. ESP Header，TCP Header，Data
C. ESP Header，TCP Header，Data,ESP Trailer
D. ESP Header，TCP Header，Data,ESP Trailer,ESP Auth
Correct Answer: A
Section: (none)
Explanation
QUESTION 73
73. If a company network administrator wants to be able to remotely manage branch network devices, which of the
following protocols will be used?
A. CIDR
B. RSTP
C. Telnet
D. VLSM
Correct Answer: C
Section: (none)
Explanation
QUESTION 74
74. A trunk port can send both tagged data frames and unlabeled data frames.
A. Correct
B. Error
Correct Answer: A
Section: (none)
Explanation
QUESTION 75
75. The port in the Huawei device supports auto-negotiation technology. The following is true about the negotiation
result ().
A. The result of the negotiation under the 10 Gigabit electrical port must be full duplex.
B. The result of the negotiation under the 100M electrical port must be half duplex
C. The negotiation process is a downgrade negotiation, ie 1000M->100M->10M
D. When the duplex mode is inconsistent, you can solve it by replacing the network cable.
Correct Answer: C
Section: (none)
Explanation
QUESTION 76
76. As shown in the figure, STP is disabled on both switches. Host A sends an ARP Request, and the following
description is correct (). (multiple choice)
A. These two switches can achieve load balancing
B. The CPU usage of these two switches will be very high.
C. The MAC address table of the two switches will frequently jitter
D. Repeated frames will appear in this network
Correct Answer: BCD

Section: (none)
Explanation
QUESTION 77
77. PPP is more secure and reliable than HDLC because PPP supports (). (multiple choice)
A. PAP
B. MD5
C. CHAP
D. SSH
Correct Answer: AC
Section: (none)
Explanation
QUESTION 78
78. The following statement is incorrect (). (multiple choice)
A. The priority of each static route can be different.
B. By default, the order of route priority is OSPF higher than RIP.
C. If the cost of the route is larger, the priority of the route is higher.
D. In VRP, the greater the priority value of the routing protocol, the higher the priority of
the route.
Correct Answer: CD
Section: (none)
Explanation
QUESTION 79
79. When a NAT uses a dynamic address pool, addresses in the address pool can be reused, that is, the same IP is
mapped to multiple intranet IPs at the same time.
A. Correct
B. Error
Correct Answer: B
Section: (none)
Explanation
QUESTION 80
80. As shown in the network topology, the cost of all links in the network is the default. When the RTA forwards the
packet to the RTE, the description of the routing is correct () (multiple choice).
A. If the routers in the network are running OSPF, the RTA will use the S1/0/0 interface to
forward data to the RTE.
B. If the routers in the network are running RIPv2, the RTA will use the S1/0/0 interface to
C. If the routers in the network are running OSPF, the RTA will use E0/0/1 interface to
forward data to RTE.
D. If the routers in the network are running RIPv2, the RTA will use the S2/0/0 interface to
Correct Answer: BC
Section: (none)
Explanation
QUESTION 81
81. When deploying an ACL on a Huawei device, the following description is correct (). (multiple choice)
A. Calling an ACL under an interface can only be applied to the exit direction.
B. The same ACL can be called under multiple interfaces
C. ACLs can only define rules in the order of 10, 20, and 30.
D. ACLs cannot be used to filter OSPF traffic because OSPF traffic is not encapsulated using
UDP protocol
E. ACL can match the TCP/UDP port number of the packet, and can specify the range of the port
number.
Correct Answer: BE
Section: (none)
Explanation
QUESTION 82
82. When the router is powered on, the configuration file is read from the default storage path for initialization of the
router. If there is no configuration file in the default storage path, what does the router use for initialization?
A. New configuration
B. Initial configuration
C. Default configuration
D. Current configuration
Correct Answer: C
Section: (none)
Explanation
QUESTION 83
83. he correct statement about free ARP is (multiple choice)
A. By sending a free ARP, you can confirm whether the IP address has a conflict.
B. The format of the free ARP packet is the same as that of the normal ARP request packet.
C. Free ARP can help update old IP address information
D. The format of the free ARP packet is the same as that of the normal ARP reply packet.
Correct Answer: AB
Section: (none)
Explanation
QUESTION 84
84. The Router‐ID of OSPFv3 can be generated automatically by the system.
A. Correct
B. Error
Correct Answer: B
Section: (none)
Explanation
QUESTION 85
85. As shown in the figure, all four switches run STP, and various parameters use default values. When a blocked
switch is sent on the G0/0/2 port of the root switch C and the configuration BPDU cannot be sent through the port,
how long will the blocked port in the network enter the forwarding state?
A. About 30 seconds
B. About 50 seconds
C. About 15 seconds
D. About 3 seconds
Correct Answer: B
Section: (none)
Explanation
QUESTION 86
86. The following description of the Router ID in OSPF is incorrect (). (multiple choice)
A. The router IDs must be the same in the same area. The router IDs in different areas can be
different.
B. The router ID must be the IP address of an interface on the router.
C. The router ID must be specified by manual configuration.
D. The prerequisite for the normal operation of OSPF is that the router has a router ID.
Correct Answer: ABC

Section: (none)
Explanation
QUESTION 87
87. The packet capture tool captures an Ethernet frame and finds that the value of the Type/Length field of the frame
is 0x0800. The correct description of the frame is (). (multiple choice)
A. The interface of the frame is in Ethernet_II format.
B. The frame structure of the frame is 802.3 format
C. The frame carries an IP packet.
D. The frame carries an IPX message.
Correct Answer: AC
Section: (none)
Explanation
QUESTION 88
88. Network management hopes to effectively use the IP address of the 192.168.176.0/25 network segment. Now
that the company's marketing department has 20 hosts, it is better to assign the following address segment to the
marketing department?
A. 192.168.176.0/25
B. 192.168.176.160/27
C. 192.168.176.48/29
D. 192.168.176.96/27
Correct Answer: D
Section: (none)
Explanation
QUESTION 89
89. The Tracert Diagnostic Tool in Huawei routers uses UDP to encapsulate trace data.
A. Correct
B. Error
Correct Answer: A
Section: (none)
Explanation
QUESTION 90
90. What is the role of the port tunk allow-pass vlan all?
A. Allow all data frames of all VLANs to pass on this port.
B. The peer port connected to the port must be configured at the same time. port trunk permit vlan all
C. The connected peer device can dynamically determine which VLAN IDs are allowed to pass.
D. If the port default vlan 3 command is configured for the connected remote device, VLAN 3 between the two
devices cannot communicate.
Correct Answer: A
Section: (none)
Explanation
QUESTION 91
91. The main function of InARP is to solve the protocol address of the peer device connected to each virtual link,
including IP address and IPX address.
A. Correct
B. Error
Correct Answer: A
Section: (none)
Explanation
QUESTION 92
92. Which of the following flow control methods can be used in the transport layer of the OSI reference model?
(multiple choice)
A. Confirmation technology
B. Cache technology
C. Source suppression message
D. Window mechanism
Correct Answer: BCD

Section: (none)
Explanation
QUESTION 93
93. When a router forwards a packet, if it does not match the corresponding detail route and there is no default route,
the router will directly discard the packet.
A. Correct
B. Error
Correct Answer: A
Section: (none)
Explanation
QUESTION 94
94. As shown in the figure, the configuration of the VLAN on the Huawei switch is correct (). (multiple choice)
A. Client1 belongs to VLAN 10, and the commands for VLAN division on the switch are correct.
B. Client2 belongs to VLAN 20, and the command for VLAN-based MAC address is correct on the
switch.
C. Client3 belongs to VLAN 30, and the commands for VLAN division on the switch are correct.
D. Client4 belongs to VLAN 40, and the commands for VLAN division on the switch are correct.
E. Client4 does not belong to VLAN 40, and the command to divide the VLAN on the switch is
incorrect.
Correct Answer: ABE

Section: (none)
Explanation
QUESTION 95
95.[Huawei]user‐interface vty 0 14
[Huawei‐ ui‐ vty0‐14]acl 2000 inbound
[Huawei‐ ui‐ vty0‐14]user privilege level 3
[Huawei‐ ui‐ vty0‐14]authentication‐mode password
Please configure the login password(maximum length 16):huawei
The configuration of Vty is as shown above, and the user privilege level is set to level 3, which is also the highest
level that can be set.
A. Correct
B. Error
Correct Answer: B
Section: (none)
Explanation
QUESTION 96
96. The ACL configuration shown above is completed on the router RTA, and the following
description is correct ().
[RTA]acl 2001
[RTA-acl-basic-2001]rule 20 permit source 20.1.1.0 0.0.0.255
[RTA-acl-basic-2001]rule 10 deny source 20.1.1.0 0.0.0.255
A. The VRP system will automatically adjust the order of the first rule in the order of configuration.
B. The VRP system does not adjust the sequence number, but will match the rule of the first configuration. 20.1.1.0
0.0.0.255
C. Configuration error, the order number of the rule must be from small to large.
D. The VRP system will first match the second rule in order. deny source 20.1.1.0 0.0.0.255
Correct Answer: D
Section: (none)
Explanation
QUESTION 97
97. As shown in the figure, after the switch SWA is running RSTP, the administrator configures the port of G0/0/3 of
the SWA as the Edge Port and replaces the host C with a switch. The correct description is ().
A. The G0/0/3 port of SWA will be closed after receiving the BPDU sent by the switch.
B. The G0/0/3 port of SWA will discard the received BPDU and forward the data normally.
C. SWA's G0/0/3 port will perform RSTP operation after receiving the BPDU.
D. Among all hosts, only host A can send and receive data normally.
Correct Answer: C
Section: (none)
Explanation
QUESTION 98
98. Which of the following is not included in the routing table?
A. Source address
B. Next hop
C. Target network
D. Routing cost
Correct Answer: A
Section: (none)
Explanation
QUESTION 99
99. In order to meet this requirement, the administrator should configure the following on the
edge router of the network. (multiple choice)
A. NAT Easy IP
B. DHCP
C. STP
D. Default route
Correct Answer: AD
Section: (none)
Explanation
QUESTION 100
100. The correct statement about inter-VLAN communication is (). (multiple choice)
A. Inter-VLAN communication can be achieved by one-arm routing
B. Inter-VLAN communication can be realized through a three-layer switch
C. Inter-VLAN communication cannot be implemented through a Layer 2 switch.
D. Inter-VLAN communication can be realized by GVRP
E. Inter-VLAN communication must rely on routers to achieve
Correct Answer: ABC

Section: (none)
Explanation
QUESTION 101
101. Which of the following types of addresses are not included in the IPv6 address?
A. Unicast address
B. Multicast address
C. Broadcast address
D. Anycast address
Correct Answer: C
Section: (none)
Explanation
QUESTION 102
102. The correct DD packet and LSA description for OSPF middle age is (). (multiple choice)
A. The DD message contains the details of the LSA.

B. The DD packet contains only the header information of the LSA.
C. The head of the LSA can uniquely identify an LSA
D. LSA head is just a small part of the LSA
Correct Answer: BCD

Section: (none)
Explanation
QUESTION 103
103. Huawei AR G3 series routers can update system files through FTP and TFTP. The following
description is correct () (multiple choice)
A. AR G3 series routers can be used as FTP clients.

B. AR G3 series routers can be used as FTP Server
C. AR G3 series routers can be used as TFTP clients.
D. AR G3 series routers can be used as TFTP Server
Correct Answer: ABC

Section: (none)
Explanation
QUESTION 104
104. The following description of PPP is correct (). (multiple choice)
A. For the physical layer, PPP supports asynchronous links and synchronous links.
B. PPP is not scalable and cannot be deployed on an Ethernet link.
C. PPP supports plaintext and ciphertext authentication
D. PPP supports multiple network layer protocols, such as IPCP and IPXCP.
E. PPP supports bundling multiple physical links into logical links to increase bandwidth
Correct Answer: ACDE

Section: (none)
Explanation
QUESTION 105
105. In a Frame Relay network, DLCI is only the identifier of a virtual circuit under an
interface. It must be globally unique during planning and deployment.
A. Correct
B. Error
Correct Answer: B
Section: (none)
Explanation
QUESTION 106
106The following incorrect description of the priority of static routes in Huawei devices is
().
A. The static router priority value ranges from 0 to 255.

B. The default value of static router priority is 60.
C. The priority of static routes is divided into internal priority and external priority.
Administrators can modify external priority.
D. The priority value of the static route is 255, indicating that the route is unavailable.
Correct Answer: A
Section: (none)
Explanation
QUESTION 107
107. If the administrator wants to update the VRP of the AR2200 router, the correct method is
(). (multiple choice)
A. The administrator configures the AR2200 as an FTP client to transfer VRP software through
FTP.
B. The administrator configures the AR2200 as an FTP server to transmit VRP software through
FTP.
C. The administrator configures the AR2200 as a TFTP server and transmits VRP software
through TFTP.
D. The administrator configures the AR2200 as a TFTP client to transmit VRP software through
TFTP.
Correct Answer: ABD

Section: (none)
Explanation
QUESTION 108
108. In order to convert some users who frequently change office locations and often
access the company network from different switches to VLAN 10, what kind of method should
the network administrator use to divide VLANs?
A. Port-based VLAN
B. VLAN based on protocol
C. VLAN based on MAC address
D. VLAN based on subnets
Correct Answer: C
Section: (none)
Explanation
QUESTION 109
109.[RTA]aaa
[RTA-aaa]domain huawei
[RTA-aaa-domain-huawei]authentication-scheme au1
[RTA-aaa-domain-huawei]authentication-scheme au2
网 The network administrator performs the above configuration on the Huawei router RTA. If a
user needs to be authenticated in the authentication domain "huawei", the following
description is correct ().
A. Will use the "authentication-scheme au1" certification

B. Will use the "authentication-scheme au2" certification
C. "authentication-scheme au1" authentication will be used, if "au1" is deleted, "au2" will
be used
D. Will use the "authentication-scheme au2" certification, if "au2" is deleted, "au1" will be
used
Correct Answer: B
Section: (none)
Explanation
QUESTION 110
110. The Age time of the RIP route that is viewed by the command on the router refers to ()
A. RIP packet update interval

B. RIP route aging time
C. RIP route suppression time
D. RIP route switching time
Correct Answer: B
Section: (none)
Explanation
QUESTION 111
111. Both the alternate port and the backup port on RSTP cannot forward user traffic, but can
receive, process, and send BPDUs.
A. Correct
B. Error
Correct Answer: B
Section: (none)
Explanation
QUESTION 112
112. The following configuration can be used to determine that the IP address of the GigabitEthernet0/0/0 interface
of this device is incorrectly configured because the IP address of the interface cannot end with 0.
[Huawei]interface GigabitEthernet0/0/0
[Huawei‐GigabitEthernet0/0/0]ip address 19.224.17.0 255.255.128.0
A. Correct
B. Error
Correct Answer: B
Section: (none)
Explanation
QUESTION 113
113. Which of the following protocols does the Frame Relay network use to dynamically map IP addresses to DLCIs?
A. ARP protocol
B. RARP Agreement
C. InARP protocol
D. MAP protocol
Correct Answer: C
Section: (none)
Explanation
QUESTION 114
114.<Huawei>reset saved-configuration
Warning:The action will delete the save configuration in the device.The configuration will be
erased to reconfigure.Continue?[Y/N]:
The administrator performs the following configuration on the AR2200. The following
description about the configuration information is correct ().
A. If the user wants to clear the saved configuration file, he should choose Y.
B. The configuration file will be retained when the device starts up.
C. If the user wants to clear the saved configuration file, he should choose N
D. The saved configuration file will be replaced by the running configuration file.
Correct Answer: A
Section: (none)
Explanation
QUESTION 115
115. In Huawei devices, which method can OSPF elect the router ID? (multiple choice)
A. If a loopback interface is configured, select the largest IP address from the IP address of the
loopback interface as the router ID.
B. If the loopback interface is not configured, select the largest IP address as the router ID
among the IP addresses of other interfaces.
C. Huawei switch may use the largest VLANIF IP address as the router ID.
D. Use the default 127.0.0.1
E. Manually define an arbitrary legal router ID
Correct Answer: ABCE
Section: (none)
Explanation
QUESTION 116
116. The following description about the trunk port and the access port is correct ().
A. The Access port can only send untagged frames.
B. The access port can only send tagged frames.
C. Trunk port can only send untagged frames
D. Trunk port can only send tagged frames.
Correct Answer: A
Section: (none)
Explanation
QUESTION 117
117. In the RIP process of the Huawei device, you can use the preference preference to
configure the preference value of the RIP route. You can also specify the routing policy
after the command and set the priority value for the specific route that meets the conditions.
A. Correct
B. Error
Correct Answer: A
Section: (none)
Explanation
QUESTION 118
118. An existing switch directly connects to a designated port of a peer device through a port,
but the port does not forward any packets, but can receive network BPDUs to monitor network
changes. The role of the port should be ().
A. Root port
B. Designated port
C. Alternate port
D. Disable port
Correct Answer: C
Section: (none)
Explanation
QUESTION 119
119. The following is true about the TTL field in the IP packet header ().
A. TTL defines the number of packets that the source host can send.
B. TTL defines the time interval at which the source host can send packets.
C. Whenever a packet passes through a router, its TTL value will be decremented by one.
D. Whenever a packet passes through a router, its TTL value will be increased by one.
Correct Answer: C
Section: (none)
Explanation
QUESTION 120
120. VRP supports OSPF multi-process. If no process ID is specified, the default process ID is ().
A. 0
B. 1
C. 10
D. 100
Correct Answer: B
Section: (none)
Explanation
QUESTION 121
121. Which of the following WLAN standard operating frequencies are in the 5 GHz band?
(multiple choice)
A. 802.11a
B. 802.11b
C. 802.11g
D. 802.11n
Correct Answer: AD
Section: (none)
Explanation
QUESTION 122
122. Which of the following are routing protocols? (multiple choice)
A. IP
B. OSPF
C. BGP
D. IPX
Correct Answer: BC
Section: (none)
Explanation
QUESTION 123
123. In the frame relay network, regarding the mapping information on the DTE device, the
description is correct ()
A. Local DLCI and remote IP address mapping
B. Mapping of local IP address to remote DLCI
C. Mapping of local DLCI to local IP address
D. Remote DLCI and remote IP address mapping
Correct Answer: A
Section: (none)
Explanation
QUESTION 124
124. Which of the following parameters cannot be used for the advanced access control list?
A. Physical interface
B. Destination port number
C. Agreement number
D. Time range
Correct Answer: A
Section: (none)
Explanation
QUESTION 125
125. On the Huawei AR G3 router, the -i parameter of the Ping command in the VRP is used to
set ()
A. Interface for sending Echo Request messages
B. Source IP address for sending Echo Request messages
C. Interface for receiving Echo Reply packets
D. Destination IP address of the received Echo Reply packet
Correct Answer: A
Section: (none)
Explanation
QUESTION 126
126. As shown in the figure, according to the configuration on the router R1, it can be judged
that the two PCs can access the ISP network normally.
A. Correct
B. Error
Correct Answer: A
Section: (none)
Explanation
QUESTION 127
127. According to the command shown above, the correct one in the following description is ().
(multiple choice)[Huawei-GigabitEthernet0/0/1]port link-type access [Huawei-GigabitEthernet0/0/1]port
default vlan 10 [Huawei-GigabitEthernet0/0/2]port link-type trunk [Huawei-GigabitEthernet0/0/2]port trunk
allow-pass vlan 10
A. The PVID of port GigabitEthernet 0/0/1 is 10.
B. The PVID of port GigabitEthernet 0/0/1 is 1.
C. The PVID of GigabitEthernet0/0/2 is 10
D. The PVID of the GigabitEthernet0/0/2 port is 1.
Correct Answer: AD
Section: (none)
Explanation
QUESTION 128
128. As shown in the figure, if the command ping 10.1.1.2 is executed on R1, LSW1 receives the data
frame from VLAN 10 of LSW2.
Signed.
A. Correct
B. Error
Correct Answer: A
Section: (none)
Explanation
QUESTION 129
129. The CHAP authentication command enabled in PPP is: ppp chap authentication.
A. Correct
B. Error
Correct Answer: B
Section: (none)
Explanation
QUESTION 130
130. The Ethernet electrical interface can work in 3 duplex modes, and the Ethernet optical
interface can only work in () mode.
A. Full duplex
B. Half duplex
C. Auto-negotiation
D. Simplex
Correct Answer: A
Section: (none)
Explanation
QUESTION 131
131. To configure OSPF on a router, you must manually configure (). (multiple choice)
A. Configure the router ID
B. Turn on the OSPF process
C. Create an OSPF area
D. Specify the network segments included in each region
Correct Answer: BCD

Section: (none)
Explanation
QUESTION 132
132. What are the following characteristics of the default VLAN in a Layer 2 Ethernet switch?
(multiple choice)
A. The default VLAN cannot be manually deleted
B. By default, the switch is a member port of the default VLAN.
C. You must create a default VLAN before you can assign a port to it.
D. The IP address configured on the switch will only be applied to the member port of the
default VLAN.
Correct Answer: AB
Section: (none)
Explanation
QUESTION 133
133. The two routers are connected through the serial port, and the serial link is
encapsulated by PPP. Which of the following parameters must be negotiated before the PPP
link is UP? (multiple choice)
A. MRU
B. Authentication Password
C. Magic-Number
D. Authentication Protocol
Correct Answer: ACD

Section: (none)
Explanation
QUESTION 134
134. In standard STP mode, which of the following non-root bridge switches forwards the TC
set by the root switch to BPUD?
A. Root port
B. Backup port
C. Designated port
D. Provisioning port
Correct Answer: C
Section: (none)
Explanation
QUESTION 135
135. The following description of the Layer 2 Ethernet switch is incorrect ().
A. Ability to learn MAC address
B. It is necessary to make certain modifications to the three-layer header of the forwarded

message, and then forward it.
C. Forward according to the Layer 2 header information of the Ethernet frame
D. Layer 2 Ethernet switch works at the data link layer
Correct Answer: B
Section: (none)
Explanation
QUESTION 136
136. As shown in the figure, the host has established a connection with the router through
Telnet. The data described below by the host is correct (). (multiple choice)
A. The destination MAC address of the data frame sent by the host is the MAC address of the
interface of the router G0/0/0.
B. The destination MAC address of the data frame sent by the host is the MAC address of the
switch.
C. The destination port number in the data segment sent by the host is 80.
D. The destination IP address of the packet sent by the host is the IP address of the
interface of the router G0/0/0.
Correct Answer: AD
Section: (none)
Explanation
QUESTION 137
137. NAPT allows multiple private IP addresses to be mapped to the same public IP address
through different port numbers. The following is the correct description of the port number in
NAPT ().
A. You must manually configure the mapping between port numbers and private addresses.
B. Only need to configure the range of port numbers
C. No need to do any configuration about the port number
D. Need to use ACL to assign port number
Correct Answer: C
Section: (none)
Explanation
QUESTION 138
138. How many ways does VRP support router configuration? (multiple choice)
A. Configure the router through the console port.
B. Configure the router through Telent
C. Configure the router through the mini USB port
D. Configure the router through FTP
Correct Answer: ABC

Section: (none)
Explanation
QUESTION 139
139. A company applies for a Class C IP address segment, but it is assigned to six
subsidiaries. The largest subsidiary has 26 computers. Different subsidiaries must be on
different network segments, and the subnet mask should be set to ().
A. 255.255.255.0
B. 255.255.255.128
C. 255.255.255.192
D. 255.255.255.224
Correct Answer: D
Section: (none)
Explanation
QUESTION 140
140. In the following description of eSight, the error is ().
A. eSight can be used to monitor and manage enterprise networks
B. eSight can only manage Huawei network devices.
C. eSight supports WLAN device management and hotspot coverage monitoring
D. eSight supports configuration file backup and traffic analysis
Correct Answer: B
Section: (none)
Explanation
QUESTION 141
141. As shown in the figure, the G0/0/1 interface of RTA and RTB is configured with IPV6
addresses of different network prefixes. The network administrator runs OSPFv3 on both
routers and configures Router-ID of OSPFv3 for each router. , the correct description below
is (). (multiple choice)
A. RTA and RTB can establish OSPFv3 neighbor relationships.
B. RTA and RTB cannot establish OSPFv3 neighbor relationships.
C. RTA can ping RTB
D. RTA cannot ping RTB
Correct Answer: AC
Section: (none)
Explanation
QUESTION 142
142. VLSM can expand any IP segment, including Class D addresses.
A. Correct
B. Error
Correct Answer: B
Section: (none)
Explanation
QUESTION 143
143. As shown in the figure, after the network administrator finishes Telnet configuration on
the router, it finds that the host cannot establish a connection with the router through
Telnet. Which of the following options can help solve the problem? (multiple choice)
A. Check if the host's ARP cache table overflows
B. Check if the switch has a default gateway address configured
C. Use ping to check the IP connectivity between the host and router G0/0/0 interface
D. Check if the configuration of Telnet on the router is correct.
Correct Answer: CD
Section: (none)
Explanation
QUESTION 144
144. What command can I type in system view to switch to user view?
A. system-view
B. router
C. quit
D. user-view
Correct Answer: C
Section: (none)
Explanation
QUESTION 145
145. As shown in the figure, regarding the topology and configuration of OSPF, the following
statement is correct ()
A. R1 and R2 can establish stable OSPF neighbor relationships
B. As long as the interface network type of R1 is restored to the default broadcast type, R1 and R2
can establish a stable neighbor relationship.
C. As long as the interface network type of R1 is restored to the default broadcast type and the
hello time is adjusted to 10s, R1 and R2 can establish stable neighbor relationships.
D. R1 Compared with R2, R2 has a better chance of becoming a DR because its interface DR
priority value is smaller.
Correct Answer: C
Section: (none)
Explanation
QUESTION 146
146. The description of the above display information is correct ().
[R1]display interface g0/0/0
GigabitEthernet0/0/0 current state:Administratively
DOWN Line protocol current state:DOWN
A. GigabitEthernet0/0/0 interface is connected with a wrong cable.

B. GigabitEthernet0/0/0 interface is not configured with an IP address.
C. GigabitEthernet0/0/0 interface does not have dynamic routing protocol enabled.
D. GigabitEthernet0/0/0 interface was manually closed by the administrator.
Correct Answer: D
Section: (none)
Explanation
QUESTION 147
147. The administrator finds that the two routers stay in the TWO-WAY state when establishing
an OSPF neighbor. The correct description is ().
A. The router is configured with the same process ID.
B. The router is configured with the same zone ID
C. The router is configured with the wrong router ID
D. These two routers are DR Other routers in the broadcast network.
Correct Answer: D
Section: (none)
Explanation
QUESTION 148
148. Using IPsec VPN to transfer data between the two hosts, in order to hide the real IP
address and ensure the highest possible data, the IPsec VPN mode and protocol package is
better? (choose 2 answers)
A. AH
B. Transmission mode
C. Tunnel mode
D. ESP
Correct Answer: CD
Section: (none)
Explanation
QUESTION 149
149. Huawei devices can be managed using the Telnet protocol. Which of the following
statements is correct about this management function?
A. The default port number used by Telnet is 22, which cannot be modified.
B. Telnet must have a VTY interface enabled and a maximum of 15
C. Telnet does not support authentication based on username and password
D. Telnet does not support deploying ACLs for added security
Correct Answer: B
Section: (none)
Explanation
Explanation
QUESTION 150
150. On the switch, which VLANs can be deleted by using the undo command? (multiple choice)
A. VLAN 1
B. VLAN 2
C. VLAN 1024
D. VLAN 4094
Correct Answer: BCD

Section: (none)
Explanation
QUESTION 151
151. In the command fr map ip 10.1.1.2 200, the meaning of the number 200 is ().
A. Peer logical channel number
B. Local DLCI number
C. Peer interface number
D. Peer node number
Correct Answer: B
Section: (none)
Explanation
QUESTION 152
152. As shown in the figure, a static NAT command is deployed on router R1. When the PC
accesses the Internet, the destination address in the packet does not change.
A. Correct
B. Error
Correct Answer: A
Section: (none)
Explanation
QUESTION 153
153. The company network engineer has an AR2200 that cannot be started normally. How can the
administrator want to update its VRP?
A. The administrator needs to use the console cable to connect to the router and host, and
then enter the BootROM interface to complete the upgrade.
B. The administrator needs to configure the AR2200 as an FTP client and use FTP to transfer
the new VRP.
C. The administrator needs to configure the AR2200 to obtain an IP address through DHCP and
then obtain the VRP system file through TFTP.
D. The administrator needs to use telnet on the local host to remotely update the VRP system
files of the device.
Correct Answer: B
Section: (none)
Explanation
QUESTION 154
154.[RTA]acl 2002
[RTA-acl-basic-2002]rule deny source 172.16.1.1 0.0.0.0
[RTA-acl-basic-2002]rule deny source 172.16.0.0 0.255.0.0
Which of the following entries will be matched on the router PTA using the ACL matching
route entries shown above? (multiple choice)
A. 172.16.1.1/32
B. 172.16.1.0/24
C. 192.17.0.0/24
D. 172.18.0.0/16
Correct Answer: AD
Section: (none)
Explanation
QUESTION 155
155. After the host obtains the IP address from DHCP server A and restarts, what kind of
message will the following message be sent to DHCP server A?
A. DHCP DISCOVER
B. DHCP REQUEST
C. DHCP OFFER
D. DHCP ACK
Correct Answer: B
Section: (none)
Explanation
QUESTION 156
156. The ACL of the AR G3 series router supports two matching sequences: configuration order
and automatic sorting.
A. Correct
B. Error
Correct Answer: A
Section: (none)
Explanation
QUESTION 157
157. The STP switch sends BPDUs. The correct statement about BPDU is (). (multiple choice)
A. BPDU is a frame using the IEEE802.3 standard
B. BPDU is a frame using the Etherent II standard
C. The Control field value of the BPDU frame is 3.
D. The destination MAC address of the BPDU frame is the broadcast address.
Correct Answer: AC
Section: (none)
Explanation
QUESTION 158
158. Referring to the output shown in the figure, it can be determined that the routing table
of the router is composed of a direct route and a static route, and the route priority value
of the directly connected route cannot be modified.
A. Correct
B. Error
Correct Answer: A
Section: (none)
Explanation
QUESTION 159
159. In the RSTP standard, the port that the switch directly connects to the terminal instead
of the other bridge is defined as ().
A. Fast port
B. Backup port
C. Root port
D. Edge port
Correct Answer: D
Section: (none)
Explanation
QUESTION 160
160. The Access port strips out the VLAN ID when it receives the same data frame with the same VLAN
ID and PVID. Then forward directly.
A. Correct
B. Error
Correct Answer: B
Section: (none)
Explanation
QUESTION 161
161. When the port of the Access type sends a message, it will ().
A. Send a packet with a tag
B. Strip the VLAN information of the message and then send it out.
C. Add the VLAN information of the packet, and then send it out.
D. Put the PVID information of this port and then send it out.
Correct Answer: B
Section: (none)
Explanation
QUESTION 162
162. You can use the undo summary command to disable automatic summarization of the routing
protocol RIPv2 in Huawei devices.
A. Correct
B. Error
Correct Answer: A
Section: (none)
Explanation
QUESTION 163
163. If the network address of a network is 10.1.1.0/30, then its broadcast address is ()?
A. 10.1.1.1
B. 10.1.1.2
C. 10.1.1.3
D. 10.1.1.4
Correct Answer: C
Section: (none)
Explanation
QUESTION 164
164. On the VRP platform, the order of the default protocol priorities of direct route,
static route, RIP, and OSPF is ().
A. Direct routing, static routing, RIP, OSPF
B. Direct routing, OSPF, static routing, RIP
C. Direct routing, OSPF, RIP, static routing
D. Direct routing, RIP, static routing, OSPF
Correct Answer: B
Section: (none)
Explanation
QUESTION 165
165. As shown in the figure, all three switches run GVRP, create VLAN 10 and VLAN 20 on SWA
and SWC, and create VLAN 10 on SWB. SWB dynamically learned VLAN 20 from SWA and SWC
through GVRP. If the G0/0/1 port on the SWB is modified to the GVRP's Fixed mode, the
following description is correct ().
A. Host A can continue to communicate with Host C.
B. Host B can continue to communicate with Host D
C. Hosts belonging to the same VLAN can continue to communicate
D. All hosts cannot communicate with any other host
Correct Answer: A
Section: (none)
Explanation
QUESTION 166
166. The MAC address of G0/0/1 on a router is 00E0-FC03-AA73. The IP address of this
interface is 2001::2E0:FCFF:AA73. Based on this information, you can determine that the
interface identifier of this interface is based on (). owned.
A. DHCPv6
B. Auto-link
C. ARP
D. EUI-64
Correct Answer: D
Section: (none)
Explanation
QUESTION 167
167. In PPP, when the dual-end of both communicating parties detects the physical link
activation, it will switch from the link unavailability phase to the link establishment
phase. At this stage, the link parameters are negotiated mainly through the () protocol.
A. IP
B. DHCP
C. LCP
D. NCP
Correct Answer: C
Section: (none)
Explanation
QUESTION 168
168. Regarding the RIP routing protocol, the following description is correct ().
A. The router cannot send a router entry with a hop count of 16 to its directly connected
neighbor.
B. The router may receive a route entry with a hop count of 16 sent by the directly
connected neighbor, but will discard it immediately after receiving it, and will not do any
other processing.
C. The router may receive a route entry with a hop count of 16 sent by the directly
connected neighbor. After receiving it, it will use it to update its own routing table.
D. The above description is not correct
Correct Answer: C
Section: (none)
Explanation
QUESTION 169
169. Which of the following storage media are commonly used by Huawei routers? (multiple
choice)
A. SDRAM
B. NVRAM
C. Flash
D. Hard Disk
E. SD Card
Correct Answer: ABCE

Section: (none)
Explanation
QUESTION 170
170. The Layer 2 Ethernet switch generates a MAC address table option based on the () packet
received by the port.
A. Source MAC address
B. Destination MAC address
C. Source IP address
D. Destination IP address
Correct Answer: A
Section: (none)
Explanation
QUESTION 171
171.OSPF 中，一台 DR other 路由器会与哪些路由器交换链路状态信息？（多选）
A. DR
B. BDR
C. DR other
D. 所有 OSPF 邻居
Correct Answer: AB
Section: (none)
Explanation
QUESTION 172
172. As shown in the figure, the H frame contains an IP packet sent from Host A to Host B,
and the destination MAC address of the H frame is ().
A. MAC address of G0/0/1 interface of RTB
B. RT0 G0/0/1 interface MAC address
C. Host B's MAC address
D. RTC G0/0/0 interface MAC address
Correct Answer: D
Section: (none)
Explanation
QUESTION 173
173. After the administrator deploys a DHCP server on the network and finds that some hosts
have obtained the address specified by the DHCP server, what are the possible reasons?
(multiple choice)
A. There is another DHCP server in the network that is more efficient.
B. Some hosts cannot communicate properly with the DHCP server. These host client systems
automatically generate addresses in the range of 169.254.0.0.
C. Some hosts cannot communicate properly with the DHCP server. These host client systems
automatically generate addresses in the range of 127.254.0.0.
D. The address pool of the DHCP server has been completely allocated.
Correct Answer: ABD

Section: (none)
Explanation
QUESTION 174
174. What is the role of the command "interface vlan vlan-id" on the VRP platform?
A. Create a VLAN
B. Create or enter a VLAN virtual interface view
C. Configure a VLAN for a port
D. No such order
Correct Answer: B
Section: (none)
Explanation
QUESTION 175
175. A Windows host is started for the first time. If the IP address cannot be obtained from
the DHCP server, which of the following IP addresses may the host use?
A. 0.0.0.0
B. 127.0.0.1
C. 169.254.2.33
D. 255.255.255.255
Correct Answer: C
Section: (none)
Explanation
QUESTION 176
176. In Huawei devices, administrators can announce subnets in RIPV2 because RIPV2 supports
VLSM.
A. Correct
B. Error
Correct Answer: B
Section: (none)
Explanation
QUESTION 177
177. The administrator wants to upgrade the configuration file for the AR2200 through the USB
cable. The following description is correct (). (multiple choice)
A. Connect the mini USB cable of the PC and AR2200 with a mini USB cable.
B. Connect the USB interface of the PC and AR2200 with a mini USB cable.
C. The AR2200 does not support the use of USB to update configuration files.
D. After connecting the cable, the administrator needs to install the driver for the mini
USB.
Correct Answer: AD
Section: (none)
Explanation
QUESTION 178
178.以上信息是某运行 STP 的交换机上所显示的端口状态信息。根据这些信息。以下的描述错误的是（）
A. It is possible to include only this switch in this network.
B. This switch may be a switch in the network.
C. This switch is a non-designated switch for the network it is connected to
D. This switch may be connected to 6 other switches.
Correct Answer: C
Section: (none)
Explanation
QUESTION 179
179. As shown in the figure, if Host A and Host B want to implement inter-VLAN communication
through one-arm routing, which configuration should be done under G0/0/1.1 interface of RTA?
A. dot1q termination vid 1
B. dot1q termination vid 10
C. dot1q termination vid 20
D. dot1q termination vid 30
Correct Answer: B
Section: (none)
Explanation
QUESTION 180
180. The following description about IPv6 is correct (). (choose 2 answers)
A. IPv6 address length is 64bits
B. IPv6 address length is 128bits
C. When an IPv6 message has multiple extension headers, the extension header must appear in an
orderly manner
D. When an IPv6 message has multiple extension headers, the extension header can appear
randomly.
Correct Answer: BC
Section: (none)
Explanation
QUESTION 181
181. When logging in to the router through Telnet, which authentication methods can I choose?
(choose 2 answers)
A. password authentication
B. AAA local certification
C. MD5 ciphertext authentication
D. Not certified
Correct Answer: AB
Section: (none)
Explanation
QUESTION 182
182. As shown in the figure, the G0/0/0 and G0/0/1 interfaces of the RTA are connected to two
different network segments respectively, and the RTA acts as a gateway for the two networks.
Before sending data to host C, host A sends an ARP Request to obtain the MAC address of ().
A. Host C
B. RTA G0/0/0 interface
C. RTA G0/0/1 interface
D. SWA
Correct Answer: B
Section: (none)
Explanation
QUESTION 183
183. When an image file is transmitted over the network using the application software, the
TCP/IP encapsulation process is: data - data segment - packet - data frame - data stream.
A. Correct
B. Error
Correct Answer: A
Section: (none)
Explanation
QUESTION 184
184. As shown in the figure, three Layer 2 switches are interconnected with one HUB, and the
switch is enabled with STP. For the bridge ID setting of the switch STP, refer to the
following figure. Others are default configurations. The following statement is wrong ().
A. After the bridge ID comparison, LSW1 is the root bridge.
B. The G0/0/2 port of LSW1 is blocked.

C. G0/0/1 of LSW3 is an AP port and is blocked.
D. Both ports of LSW1 are designated ports and are in the forwarding state.
Correct Answer: D
Section: (none)
Explanation
QUESTION 185
185. Which of the following is not included in the VRP system login method?
A. Telnet
B. SSH
C. Web
D. Netstream
Correct Answer: D
Section: (none)
Explanation
QUESTION 186
186. As shown in the Display information, when the switch needs to forward a frame with a
destination MAC address of 5489-98ec-f011. The correct description below is ().
A. The switch needs to send a request to discover the device with the MAC address 5489-98ec-
f011.
B. The switch will send the target unreachable message to the source device.
C. The switch will flood the frame on all ports except the one that received the frame.
D. The switch did not find a matching entry in the MAC address table, so the frame will be
discarded.
Correct Answer: C
Section: (none)
Explanation
QUESTION 187
187. What versions of SNMP are supported by eSight? (multiple choice)
A. SNMPv1
B. SNMPv2
C. SNMPv2c
D. SNMPv3
Correct Answer: ACD

Section: (none)
Explanation
QUESTION 188
188. The following description is correct (). (multiple choice)
A. The next hop in the routing table is redundant. If there is an outgoing interface, the
packet can be forwarded.
B. Routes obtained through different routing protocols have different priorities
C. Comparability of metrics defined by different routing protocols

D. The metrics defined by different routing protocols are not comparable
Correct Answer: BD
Section: (none)
Explanation
QUESTION 189
189. When an IPsec tunnel is established between two routers, which of the following
parameters does not need to be consistent between IPsec peers?
A. The security protocol used
B. Data encapsulation mode
C. Proposal name
D. Authentication algorithm
Correct Answer: C
Section: (none)
Explanation
QUESTION 190
190. As shown in the figure, all
four switches run STP, and various
parameters use default values.
When a port on the root switch
sends a jam and fails to send
configuration BPDUs through the
port, how long will the blocked
port in the network enter the
forwarding state?
A. About 30 seconds
B. About 50 seconds
C. About 15 seconds
D. About 3 seconds
Correct Answer: B
Section: (none)
Explanation
QUESTION 191
191. When configuring the router through the Console, the correct setting for the terminal
emulator is ().
A. 48006ps, 8-bit data bits, 1-bit stop bit, odd parity and no flow control
B. 96006ps, 8-bit data bit, 1 stop bit, no parity and no flow control
C. 96006ps, 8-bit data bits, 1-bit stop bit, even parity and hardware flow control
D. 192006ps, 8-bit data bit, 1 stop bit, no parity and no flow control
Correct Answer: B
Section: (none)
Explanation
QUESTION 192
192. The following description of the specified port for the spanning tree is correct.
A. There is only one designated port per bridge
B. The designated port can forward configuration BPDUs to its connected network segment.
C. The port on the root switch must not be the designated port.
D. Specify the port to forward configuration BPDUs from this switch to the root switch.
Correct Answer: B
Section: (none)
Explanation
QUESTION 193
193. On a frame relay network, a static MAP is configured on an interface. If the fr inarp
command is run, the interface sends an Inverse ARP request packet to the peer and overwrites
the static MAP record.
A. Correct
B. Error
Correct Answer: B
Section: (none)
Explanation
QUESTION 194
194. Which of the following commands can be used to check whether OSPF has correctly
established neighbor relationships?
A. display ospf neighbor

B. display ospf brief
C. display ospf peer
D. display ospf interface
Correct Answer: C
Section: (none)
Explanation
QUESTION 195
195. The administrator finds that the file cannot be transferred to the Huawei AR2200 router
through TFTP. What is the possible cause? ()
A. TFTP service is disabled on the router
B. TCP port 69 of the TFTP server is disabled
C. UDP port 69 of the TFTP server is disabled
D. The username and password on the TFTP server are modified.

Correct Answer: C
Section: (none)
Explanation
QUESTION 196
196. Which of the following commands can be used to check the session status of a PPPoE client?
A. display ip interface brief

B. display current-configuartion
C. display pppoe-client session packet
D. display pppoe-client session summary
Correct Answer: D
Section: (none)
Explanation
QUESTION 197
197. An AR2200 router learns the route entries to the same network through OSPF and RIPv2. The
cost of the route learned through OSPF is 4882. The number of hops learned through RIPv2 is 4.
The routing table of the router will be ().
A. RIPv2 routing
B. OSPF and RIPv2
C. OSPF routing
D. Both do not exist
Correct Answer: C
Section: (none)
Explanation
QUESTION 198
198. When the client accesses the FTP server, an error occurs. Check that there is no problem
with the connectivity between the server and the client. Is it possible that the server port
is blocked? (choose 2 answers)
A. 21
B. 80
C. 20
D. 50649
Correct Answer: AC
Section: (none)
Explanation
QUESTION 199
199. The function of OSPF hello packets is (). (multiple choice)
A. Discovering neighbors
B. Publish parameter information such as Router ID and Router Priority.
C. Maintaining neighbor relationships
D. Synchronous router LSDB
Correct Answer: ABC

Section: (none)
Explanation
QUESTION 200
200. The administrator wants to completely delete the old device configuration file config.zip,
then the following command is correct ().
A. delete/force config.zip
B. delete/unreserved config.zip
C. reset config.zip
D. clear config.zip
Correct Answer: B
Section: (none)
Explanation
QUESTION 201
201. On the command line interface of the Huawei AR router, the save command saves the current
system time.
A. Correct
B. Error
Correct Answer: B
Section: (none)
Explanation
QUESTION 202
202. When the router's configuration file is saved, which storage medium is generally stored
on it?
A. SDRAM
B. NVRAM
C. Flash
D. Boot ROM
Correct Answer: C
Section: (none)
Explanation
QUESTION 203
203. Ip route-static 10.0.12.0 255.255.255.0 192.168.11 The correct description about this command
is ().
A. This command configures a route to the 192.168.1.1 network.
B. This command configures a route to the 10.0.12.0 network.
C. The priority of this route is 100.
D. If the router learns the route of the same network as this route through other protocols,
the router will prefer this route.
Correct Answer: B
Section: (none)
Explanation
QUESTION 204
204. This is the three packets that the administrator has captured on the network. The
following statement is incorrect ().
A.
These
three packets represent the three-way handshake of TCP.
B. The IP address of the Telnet server is 10.0.12.1, and the IP address of the Telnet client
is 10.0.12.2.
C. These three data packages do not contain application data.
D. The Telnet client uses the 50190 port to establish a connection with the server.
Correct Answer: B
Section: (none)
Explanation
QUESTION 205
205. The broadcast address is a special address in the network address where the host bits are
all set to 1. It can also be used as a host address.
A. Correct
B. Error
Correct Answer: B
Section: (none)
Explanation
QUESTION 206
206. The backup port in RSTP can replace the failed root port.
A. Correct
B. Error
Correct Answer: B
Section: (none)
Explanation
QUESTION 207
207. What types of networks are supported by the OSPF protocol? (multiple choice)
A. Point-to-Point
B. Broadcast
C. Non-Broadcast Multi-Access
D. Point-to-Multipoint
Correct Answer: ABCD

Section: (none)
Explanation
QUESTION 208
208. When two switches use link aggregation technology for interconnection, which of the
following conditions do each member port need to meet? (multiple choice)
A. The number of physical ports connected to the two ends is the same.
B. The physical ports connected to the two ends have the same rate.
C. The physical port duplex mode connected to the two ends is the same.
D. The physical numbers of the physical interfaces connected to the two ends are the same.
E. The optical modules used by the physical ports connected to the two ends are of the same
type.
Correct Answer: ABC

Section: (none)
Explanation
QUESTION 209
209. Network management work manages network devices through the SNMP protocol. When an
abnormality occurs in the managed device, what kind of SNMP packets will the network
management station receive?
A. get-response message
B. set-request message
C. trap message
D. get-request message
Correct Answer: C
Section: (none)
Explanation
QUESTION 210
210. The following description about the ICMP redirect function is correct (). (multiple
choice)
A. After the router receives the data packet from an interface and sends the data packet out
of the interface, the router will send an ICMP redirect message to the source device.
B. After the router receives the data packet from an interface and finds that the IP address
of the interface and the destination IP address of the data packet are on the same network
segment, the router will send an ICMP redirect message to the source device.
C. After the router receives the data packet from an interface and sends the data packet from
the interface again, the source device will send an ICMP redirect message to the router.
D. After the router receives the data packet from an interface and finds that the source IP
address of the data packet belongs to the same network segment as the next hop IP address when
the router continues to forward the data packet, the router will send an ICMP redirect message
to Source device.
Correct Answer: AD
Section: (none)
Explanation
QUESTION 211
211. On the VRP interface, you cannot use the command delete or unreserved vrpcfg.zip to delete
files. You must empty them in the recycle bin to delete files completely.
A. Correct
B. Error
Correct Answer: B
Section: (none)
Explanation
QUESTION 212
212. Regarding the role of ARP protocol and packet encapsulation, the description is correct ()
A. Inverse ARP in ARP is used to resolve device names
B. The MAC address of the destination and the address of the UUID can be obtained through the
ARP protocol.
C. ARP protocol supports deployment on PPP links and HDLC links
D. ARP protocol is based on Ethernet package

Correct Answer: D
Section: (none)
Explanation
QUESTION 213
213. As shown in the figure, the Eth-Trunk logical link can be established between the two
switches. And LSW2 is the active end.
A. Correct
B. Error
Correct Answer: B
Section: (none)
Explanation
QUESTION 214
214. As shown in the figure, the RTA is a DTE device connected to the frame relay switch. If
the RTA uses dynamic mapping to establish a PVC connection, which of the following commands
do not need to be configured on the RTA? (multiple choice)
A. [RTA-Serial1/0/1]ip address 172.16.1.124

B. [RTA-Serial1/0/1]link-protocol fr
C. [RTA-Serial1/0/1]fr interface-type dte
D. [RTA-Serial1/0/1]fr inarp
Correct Answer: CD
Section: (none)
Explanation
QUESTION 215
215. If two IPsec VPN peers want to use both AH and ESP to ensure secure communication, how
many do the two peers need to build?
SA
(Security Alliance)?
A. 1
B. 2
C. 3
D. 4
Correct Answer: D
Section: (none)
Explanation
QUESTION 216
216. A trunk port can allow multiple VLANs to pass, including VLAN4096.
A. Correct
B. Error
Correct Answer: B
Section: (none)
Explanation
QUESTION 217
217.
Interface GigabitEthernet0/0/1
Port link‐type trunk
Port trunk allow‐pass vlan 2 to 4094
#
According to the command output shown above, the correct one in the following description is
() (multiple selection)
A. GigabitEthernet0/0/1 does not allow VLAN1 to pass.
B. GigabitEthernet0/0/1 allows VLAN1 to pass
C. If you want to change the GigabitEthernet0/0/1 port to an Access port, first use the
command “undo port trunk allow‐pass vlan all” to clear the default configuration.
D. If you want to change the GigabitEthernet0/0/1 port to an Access port, first use the
command “undo port trunk allow‐pass vlan 2 to 4094” to clear the default configuration.
Correct Answer: BD
Section: (none)
Explanation
QUESTION 218
218. The STP root switch is elected based on the priority of the switch. In RSTP, the switch
priority and MAC address are compared at the same time.
A. Correct
B. Error
Correct Answer: B
Section: (none)
Explanation
QUESTION 219
219. The administrator configured the above configuration on the Router. After the switch is
connected to a switch on the G1/0/0 interface of the router, the IP address description of
the host is correct ().
[Router]ip pool pool 1
[Router-ip-pool-pool 1]network 10.10.10.0 mask 255.255.255.0
[Router-ip-pool-pool 1]gateway-list 10.10.10.1
[Router-ip-pool-pool 1]quit
[Router]ip pool pool 2
[Router-ip-pool-pool 2]network 10.20.20.0 mask
255.255.255.0 [Router-ip-pool-pool 2]gateway-list
10.20.20.1 [Router-ip-pool-pool 2]quit
[Router]interface GigabitEthernet 1/0/0 [Router-
GigabitEthernet 1/0/0]ip address 10.10.10.1.24
[Router-GigabitEthernet 1/0/0]dhcp select global
A. The obtained IP address belongs to the 10.10.10.0/24 network.
B. The obtained IP address belongs to the 10..20.20.0/24 network.
C. The host cannot obtain an IP address.
D. The obtained IP address may belong to the 10.10.10.0/24 network, or it may belong to the
10.20.20.0/24 network.
Correct Answer: A
Section: (none)
Explanation
QUESTION 220
220. As shown in the figure, RTA sends a PADI message to server A as a PPPOE client, and
server A replies to a PADO message. The PADO message is a () frame.
A. Unicast
B. Multicast
C. Broadcast
D. Anycast
Correct Answer: A
Section: (none)
Explanation
QUESTION 221
221. As shown in the figure, the address borrowing is configured on the Serial 1/0/1 interface
of the RTA using the command "ip address unnumbered interface loopback 0". The following
description is correct (). (multiple choice)
A. The IP address of the interface of Serial 1/0/1 of the RTA is 10.1.1.1/24.
B. The IP address of the interface Serial 1/0/1 of the RTA is 10.1.1.1/32.
C. There is a 10.1.1.0/24 routing entry in the RTA routing table.
D. There is no 10.1.1.0/24 routing entry in the RTA routing table.
Correct Answer: BD
Section: (none)
Explanation
QUESTION 222
222. The following is incorrect about the description of STP () (multiple choice)
A. There can only be one designated switch in a switched network
B. All ports of the root switch are root ports
C. All ports in the root switch are designated ports
D. The switch with the lowest switch priority value in the switched network becomes a non-
root switch.
Correct Answer: ABD

Section: (none)
Explanation
QUESTION 223
223. A router learns routes to the same destination address through RIP, OSPF, and static
routes. By default, VRP will ultimately choose which routing protocol to learn the route
through?
A. RIP
B. OSPF
C. The routes learned by the three protocols are selected.
D. Static routing
Correct Answer: B
Section: (none)
Explanation
QUESTION 224
224. The administrator plans to implement a route backup by configuring a static floating
route. The correct implementation method is ().
A. The administrator needs to configure different protocol priority values for the primary
static route and the alternate static route.
B. The administrator only needs to configure two static routes.

C. The administrator needs to configure different TAGs for the primary static route and the
standby static route.
D. The administrator needs to configure different metrics for the primary static route and
the alternate static route.
Correct Answer: A
Section: (none)
Explanation
QUESTION 225
225. What is the full name of VRP?
A. Versatile Routine Platform

B. Virtual Routing Platform
C. Virtual Routing Plane
D. Versatile Routing Platform
Correct Answer: D
Section: (none)
Explanation
QUESTION 226
226. The port cost calculated by STP has a certain relationship with the port bandwidth. That is, the
larger the bandwidth, the more overhead ().
A. small
B. Big
C. Consistent
D. Not necessarily
Correct Answer: A
Section: (none)
Explanation
QUESTION 227
227. After a fault occurs in the network, the administrator finds out that the configuration
of a router has been modified. What measures should the administrator take to prevent this
from happening again? (multiple choice)
A. The administrator should configure all account login devices except the administrator to
have a privilege level of 0.
B. The administrator should configure AAA to authenticate and authorize users who log in to
the device.
C. The administrator should configure the ACL to control only the administrator to log in to
the device.
D. The administrator should enable port-security on the management port of the route
Correct Answer: ABC
Section: (none)
Explanation
QUESTION 228
228. If the network address of a network is 192.168.1.0, then its broadcast address must be
192.168.1.255.
A. Correct
B. Error
Correct Answer: B
Section: (none)
Explanation
QUESTION 229
229. The following figure shows the routing table of a router. When the router receives a
packet with the destination IP address of 9.1.1.1, the router forwards the packet according
to the route of 9.1.0.0/16 because the route matches the destination address 9.1. The number
of bits in .1.1 is more.
A. Correct
B. Error
Correct Answer: A
Section: (none)
Explanation
QUESTION 230
230. The VRP operating system commands are divided into four levels: access level, monitoring
level, configuration level, and management level. Which level of the file system can I run various
business configuration commands but cannot operate?
A. Access level
B. Monitoring level
C. Configuration level
D. Management level
Correct Answer: C
Section: (none)
Explanation
QUESTION 231
231. On a Huawei device, if AAA authentication is used for authorization, when the remote
server does not respond, authorization can be performed from the network device.
A. Correct
B. Error
Correct Answer: A
Section: (none)
Explanation
QUESTION 232
232. When configuring AAA authentication on Huawei AR G3 series routers, how many domains can
be configured?
A. 30
B. 31
C. 32
D. 33
Correct Answer: A
Section: (none)
Explanation
QUESTION 233
233. A port of the switch is configured as a trunk port, and it is now planned to connect a
host to the port to access the network. The following essential operations are ().
A. Delete multiple VLANs on the port in the global view.
B. Delete multiple VLANs on the port in interface view
C. Close the interface and re-enable it to restore the default configuration
D. Configure the interface as an access port

Correct Answer: D
Section: (none)
Explanation
QUESTION 234
234. Port aggregation is to aggregate multiple ports to form an aggregation group to implement
load balancing among member ports. Port aggregation is implemented on ().
A. Physical layer
B. Data link layer
C. Network layer
D. Transport layer
Correct Answer: B
Section: (none)
Explanation
QUESTION 235
235. Which of the following configurations is not required when configuring an AR2200 router
as a PPPoE client?
A. Configure dialing rules
B. Configure the dialer interface
C. Configure an IP address on the dialer interface
D. Configure the password on the dialer interface

Correct Answer: C
Section: (none)
Explanation
QUESTION 236
236. How do I enter the view of OSPF area 0 in the VRP operating system? (multiple choice)
A. [huawei]ospf area 0
B. [huawei-ospf-1]area 0
C. [huawei-ospf-1]area 0.0.0.0
D. [huawei-ospf-1]area 0 enable
Correct Answer: BC
Section: (none)
Explanation
QUESTION 237
237. If you use a 10 Gigabit optical module to interconnect two Huawei S5700 switches, the
working mode of the interconnect port defaults to full duplex.
A. Correct
B. Error
Correct Answer: A
Section: (none)
Explanation
QUESTION 238
238. The broadcast address of the subnet 192.168.1.0/25 is 192.168.1.128.
A. Correct
B. Error
Correct Answer: B
Section: (none)
Explanation
QUESTION 239
239. As shown in the figure, the packet is encapsulated in IPsec VPN. Which type of packet is
encapsulated in IPsec VPN?
A. Universal mode
B. Transmission mode
C. Tunnel mode
D. This package error

Correct Answer: C
Section: (none)
Explanation
QUESTION 240
240. If the Authenticator sends the wrong username and password to the Authenticator during
the PPP authentication process, what type of message will the Authenticator send to the
Authenticator?
A. Authenticate-Ack
B. Authenticate-Nak
C. Authenticate-Reject
D. Authenticate-Reply
Correct Answer: B
Section: (none)
Explanation
QUESTION 241
241Network administrators typically use link aggregation technology in their corporate networks.
Which of the following descriptions are the advantages of link aggregation? (multiple choice)
A. Implement load sharing
B. Increase bandwidth
C. Improve reliability
D. Improve security
Correct Answer: ABC
Section: (none)
Explanation
QUESTION 242
242. As shown in the figure, if the switch runs STP with default parameters, which of the
following ports will be elected as the designated port?
A. Port G0/0/1 of Switch A
B. Port G0/0/2 of Switch A
C. HUB's E0/0/1 port
D. HUB's E0/0/2 port

Correct Answer: A
Section: (none)
Explanation
QUESTION 243
243. After the administrator successfully logs in to the router through Telnet and finds that
the IP address of the interface of the router cannot be configured, the possible causes are
().
A. The Telnet terminal software used by the administrator prohibits the corresponding
operation.
B. The authentication mode of the Telnet user is incorrectly configured.
C. The Telnet user level is incorrectly configured.
D. SNMP parameter configuration error

Correct Answer: C
Section: (none)
Explanation
QUESTION 244
244. Which of the following IPv6 addresses can be manually configured on the router interface?
(multiple choice)
A. fe80:13dc::1/64
B. ff00:8a3c::9b/64
C. ::1/128
D. 2001:12e3:1b02::21/64
Correct Answer: AD
Section: (none)
Explanation
QUESTION 245
245. The role of the VLSM is to divide the corresponding number of bits from the host bit portion
as a network bit based on the classful IP address. However, when deployed on a router, routing
protocol support is required.
A. Correct
B. Error
Correct Answer: A
Section: (none)
Explanation
QUESTION 246
246. Regarding IPv6 address 2031: 0000:72C:0000:0000:09E0:839A:130B, which of the following
abbreviations are correct? (multiple choice)
A. 2031:0:720C:0:0:9E0:839A:130B
B. 2031:0:720C:0:0:9E:839A:130B
C. 2031::720C::9E:839A:130B
D. 2031:0:720C::9E0:839A:130B
Correct Answer: AD
Section: (none)
Explanation
QUESTION 247
247. The administrator found that the above message popped up on the device. The correct
statement about this information is (). <Huawei>Warning:Auto-Config is working.Before
configuring the device,stop Auto-Config.If you perform configurations when Auto-Config is
running,the DHCP,routing,DNS,and VTY configurations will be lost.Do you want to stop Auto-
config?[Y/N]:
A. If you need to enable automatic configuration, the administrator needs to choose Y
B. If you do not need to enable automatic configuration, the administrator needs to select N
C. The auto configuration feature is enabled the first time the device is booted.
D. When the device is first started, the auto configuration function is disabled.
Correct Answer: C
Section: (none)
Explanation
QUESTION 248
248. On the VRP platform, if you want the ping program to use the specified IP address as the
source address of the echo request message, which of the following parameters can you use?
A. -a
B. -s
C. -d
D. -n
Correct Answer: A
Section: (none)
Explanation
QUESTION 249
249. A frame relay PVC is configured on the router and found to be invalid. What is the
possible cause? (multiple choice)
A. Configure the same DLCI on the same router
B. LMI type configuration error
C. Frame Relay encapsulation type configuration error
D. DLCI configuration error

Correct Answer: BCD
Section: (none)
Explanation
QUESTION 250
250. It is known that the routing table of a router has the following two entries. If the
router wants to forward packets with the destination address of 9.1.4.5, the correct one in
the following statement is ().
A. Select the first item as the best match because the OSPF protocol has a higher priority.
B. Select the second item as the best match because the RIP protocol has a lower generation
value.
C. Select the second item as the best match because the exit is Ethternet0, which is faster
than Serial 0.
D. Select the second term as the best match because the route entry is a more accurate match
for the destination address 9.1.4.5
Correct Answer: D
Section: (none)
Explanation
QUESTION 251
251. What advanced content can be used to filter advanced ACLs on Huawei devices? (multiple
choice)
A. Network traffic based on a specific source address
B. Application-specific traffic, such as QQ
C. Network traffic based on a specific destination address
D. Network traffic based on a specific port number
E. Network traffic based on a specific username
Correct Answer: ACD

Section: (none)
Explanation
QUESTION 252
252. The subnet mask of a network segment 150.25.0.0 is 255.255.224.0, then () is the
effective host address in the network segment. (multiple choice)
A. 150.25.0.0
B. 150.25.1.255
C. 150.25.2.24
D. 150.15.3.30
Correct Answer: BC
Section: (none)
Explanation
QUESTION 253
253.如图所示，R1 与 R2 之间运行 RIP，R1 不能学习到 2.2.2.2/32 或者 2.0.0.0/8 的路由。
A. Correct
B. Error
Correct Answer: A
Section: (none)
Explanation
QUESTION 254
254. For the description of the PPP link establishment process, the following statement is
wrong () (multiple choice)
A. The Dead phase is also called the physical layer unavailability phase. When both ends of
the communication side detect the physical line activation, they will move from the Dead
phase to the Establish phase, that is, the establishment phase.
B. During the Establish phase, the PPP link negotiates LCP parameters. Negotiation includes
the maximum receiving unit MRU, authentication method, magic word and other options
C. During the Network phase, the PPP link performs NCP negotiation. Select and configure a
network layer protocol through NCP negotiation and negotiate network parameters
D. After the NCP negotiation is successful, the PPP link will remain in communication and
enter the Terminate phase.
E. PPP link supports half-duplex and full-duplex modes

Correct Answer: DE
Section: (none)
Explanation
QUESTION 255
255. The administrator configures OSPF on a router. However, if the loopback interface is not
configured on the router, the description of the router ID is correct.
A. The minimum IP address of the physical interface of the router will become the router ID.
B. The maximum IP address of the physical interface of the router will become the router ID.
C. The IP address of the router management interface will become the Router ID.
D. The priority of the router will become the Router ID.

Correct Answer: B
Section: (none)
Explanation
QUESTION 256
256. A DHCP OFFER packet can carry a DNS address, but can only carry one DNS address.
A. Correct
B. Error
Correct Answer: B
Section: (none)
Explanation
QUESTION 257
257. UDP is connectionless and must use () to provide the reliability of the transmission.
A. Internet Protocol
B. Application layer protocol
C. Network layer protocol
D. Transmission Control Protocol

Correct Answer: B
Section: (none)
Explanation
QUESTION 258
258. VLAN 4095 cannot be created when a VLAN rule is created on a Huawei switch. You cannot delete
VLAN 1.
A. Correct
B. Error
Correct Answer: A
Section: (none)
Explanation
QUESTION 259
259. Which of the following forms of DUID can be configured when DHCPv6 is configured in the
VRP system? (multiple choice)
A. DUID-LL
B. DUID-LLT
C. DUID-EN
D. DUID-LLC
Correct Answer: AB
Section: (none)
Explanation
QUESTION 260
260. Refer to the configuration results of the following output, the correct one in the RIP
description is ().
A. Automatic summary is on
B. RIP process number is 1
C. The interval for sending RIP route update packets is 30s.
D. The garbage timeout time of the RIP route is 180s.

Correct Answer: C
Section: (none)
Explanation
QUESTION 261
261. As shown in the figure, there is a web server in the private network that needs to
provide more HTTP services to the public network users. Therefore, the network administrator
needs to configure NAT on the gateway router RTA to implement the requirements. The correct
configuration that meets the requirements in the following configurations is ( ).
A. [RTA-Serial1/0/1] nat server protocol tcp global 202.10.10.1 www inside 192.168.1.1 8080
B. [RTA-Serial1/0/1] nat server protocol tcp global 192.168.1.1 www inside 202.10.10.1 8080
C. [RTA-Gigabitethernet0/0/1] nat server protocol tcp global 202.10.10.1 www inside 192.168.1.1
8080
D. [RTA-Gigabitethernet0/0/1]] nat server protocol tcp global 192.168.1.1 www inside 202.10.10.1
8080
Correct Answer: A
Section: (none)
Explanation
QUESTION 262
262. There are 50 private IP addresses in a company network. The administrator uses NAT
technology to access the public network. The company has only one public network address.
Which of the following NAT conversion methods meets the requirements?
A. Static conversion
B. Dynamic conversion
C. easy-ip
D. NAPT
Correct Answer: C
Section: (none)
Explanation
QUESTION 263
263. As shown in the figure, the RTA sends a PADI message to the server A as a PPPOE client.
Which of the following transmission methods will the PADI message use?
A. Unicast
B. Multicast
C. Broadcast
D. Anycast
Correct Answer: C
Section: (none)
Explanation
QUESTION 264
264. STP can solve the loop problem in the switching network while improving network reliability.
A. Correct
B. Error
Correct Answer: A
Section: (none)
Explanation
QUESTION 265
265. On the router, which command can be used to display the mapping between network address
and DLCI?
A. display fr interface
B. display fr
C. display map-info
D. display fr brief
Correct Answer: C
Section: (none)
Explanation
QUESTION 266
266. 192.168.1.127/25 stands for the () address.
A. Host
B. Network
C. Multicast
D. Broadcasting
Correct Answer: D
Section: (none)
Explanation
QUESTION 267
267. The Tracert diagnostic tool records the () of each ICMP TTL timeout message, so that the user
can provide the IP address through which the message arrived at the destination.
A. Destination port
B. Source port
C. Destination IP address
D. Source IP address
Correct Answer: D
Section: (none)
Explanation
QUESTION 268
From the perspective of project cutover, there is no need to back up or adjust the
configuration file when upgrading the VRP system, because the lost files can be retrieved in
the recycle bin.
A. Yes
B. Wrong
Correct Answer: B
Section: (none)
Explanation
QUESTION 269
As shown in the broadcast network, OSPF runs on four routers and is in the
same area and on the same network segment. OSPF automatically elects a DR and
multiple BDRs to achieve better backup results.
A. Yes
B. Wrong
Correct Answer: B
Section: (none)
Explanation
QUESTION 270
The Layer 2 switch belongs to the data link layer device and can identify the MAC address
information in the data frame, forward the data according to the MAC address, and record the
MAC address and corresponding port information in its own internal MAC address table.
A. Yes
B. Wrong
Correct Answer: A
Section: (none)
Explanation
QUESTION 271
When two OSPF routers form a TWO-WAY neighbor relationship, the LSDB has completed
synchronization, but the SPF algorithm has not been run.
A. Yes
B. Wrong
Correct Answer: B
Section: (none)
Explanation
QUESTION 272
SNMP packets are carried over TCP.
A. Yes
B. Wrong
Correct Answer: B
Section: (none)
Explanation
QUESTION 273
When RIPv1 is enabled on the Huawei router, the interface that is advertised to the RIP receives
the RIPv1 broadcast packet, the RIPv2 broadcast packet, and the multicast packet by default.
A. Yes
B. Wrong
Correct Answer: A
Section: (none)
Explanation
QUESTION 274
<Huawei>system‐view
[Huawei]command‐privilege level 3 view user save
The correct statement about the above configuration command is ()
A. Modify the save command of a user to have a permission level of 3
B. Modify the permission level of the save command in the user view to 3
C. Modify the user view command to a permission level of 3, and save the configuration
D. Modify the user's permission level to 3, and save the configuration

Correct Answer: B
Section: (none)
Explanation
QUESTION 275
In the VRP system, which of the following functions does the Ctrl+Z key combination have?
(multiple choice)
A. Return to the user view from the system view
B. Exit the current view
C. Exit interface view
D. Exit the Console interface view
E. Return from any view to the user view

Correct Answer: ABCDE
Section: (none)
Explanation
QUESTION 276
In standard STP mode, which of the following non-root switches forwards the TC set BPDU
generated by the root switch?
A. Root port
B. Backup port
C. Designated port
D. Provisioning port
Correct Answer: C
Section: (none)
Explanation
QUESTION 277
The following statement about DLCI is correct (). (multiple choice)
A. DLCI only has local significance
B. DLCI is assigned by the DTE side
C. The DLCI range available to the user is 16‐1007.
D. Different physical interfaces can be configured with the same DLCI

Correct Answer: AD
Section: (none)
Explanation
QUESTION 278
STP root switch priority ranges from 0 to 65536.
A. Yes
B. Wrong
Correct Answer: B
Section: (none)
Explanation
QUESTION 279
Network administrators use ping to check network connectivity. Which of the following
protocols might be used in the process? (multiple choice)
A. ICMP
B. TCP
C. ARP
D. UDP
Correct Answer: AC
Section: (none)
Explanation
QUESTION 280
When saving the router's configuration file, which storage medium is normally stored on it?
A. SDRAM
B. NVRAM
C. Flash
D. Boot ROM
Correct Answer: B
Section: (none)
Explanation
QUESTION 281
When the routers are running in the same OSPF area, the description of their LSDB and routing
table is correct (). (multiple choice)
A. The link state databases obtained by all routers are the same.
B. The link state database obtained by each router is different.
C. The routing table of each router is different.
D. The routing tables obtained by all routers are the same.

Correct Answer: AC
Section: (none)
Explanation
QUESTION 282
If the broadcast address of a network is 172.16.1.255, then its network address may be ()?
A. 172.16.2.0
B. 172.16.1.253
C. 172.16.1.128
D. 172.168.1.1
Correct Answer: C
Section: (none)
Explanation
QUESTION 283
The following configuration default routing commands are correct ()
A. [Huawei]ip route‐static 0.0.0.0 0.0.0.0 192.168.1.1
B. [Huawei]ip route‐static 0.0.0.0 255.255.255.255 192.168.1.1
C. [Huawei‐Serial0]ip route‐static 0.0.0.0 0.0.0.0 0.0.0.0
D. [Huawei]ip route‐static 0.0.0.0 0.0.0.0 0.0.0.0
Correct Answer: A
Section: (none)
Explanation
QUESTION 284
When the data encapsulation mode of IPSec is tunnel mode, the IP address of the intranet host is
hidden. The reason for this is to protect the security of the entire original packet.
A. Yes
B. Wrong
Correct Answer: A
Section: (none)
Explanation
QUESTION 285
Referring to the configuration of the one-arm route in the following figure, it can be judged
that even if the ARP proxy is not enabled on the sub-interface of R1, the administrative
department and the finance department can exchange visits.
A. 对
B. 错
Correct Answer: B
Section: (none)
Explanation
QUESTION 286
As shown in the figure, the network administrator needs to configure static NAT on the RTA so
that host A in the private network can communicate with the public network host C. The
configuration of the static NAT is correct ().
A. [RTA‐Serial 1/0/1]nat outbound 200.1.1.10
B. [RTA‐Serial 1/0/1]nat static global 200.1.1.10 inside 192.168.1.0
C. [RTA‐Serial 1/0/1]nat static global 192.168.1.1 inside 200.1.1.10
D. [RTA‐Serial 1/0/1]nat static global 200.1.1.10 inside 192.168.1.1
Correct Answer: D
Section: (none)
Explanation
QUESTION 287
When the data encapsulation mode of IPSec is tunnel mode, the IP address of the intranet host is
hidden. The reason for this is to protect the security of the entire original data packet.
A. Yes
B. Wrong
Correct Answer: A
Section: (none)
Explanation
QUESTION 288
<Huawei>system - view
[Huawei]command - privilege level 3 view user save
The correct statement about the above configuration command is ()
A. Modify the user's permission level to 3, and save the configuration.
B. Modify the user view command to a permission level of 3, and save the configuration.
C. Modify the permission level of the save command used by a user to 3

D. Modify the permission level of the save command in the user view to 3
Correct Answer: D
Section: (none)
Explanation
QUESTION 289
SNMP packets are carried over TCP.
A. Yes
B. Wrong
Correct Answer: B
Section: (none)
Explanation
QUESTION 290
NAT can be implemented in a variety of ways, suitable for different scenarios. For example,
dynamic NAT can translate the server address inside the private network into a public network IP
address to provide services to the public network.
A. Yes
B. Wrong
Correct Answer: B
Section: (none)
Explanation
QUESTION 291
With reference to the following topology and configuration, the two routers are connected
through a Serial cable. If no Layer 2 protocol is specified, the PPP protocol is used by
default.
A. Yes
B. Wrong
Correct Answer: A
Section: (none)
Explanation
QUESTION 292
AAA is an abbreviation for Authentication, Authorization, and Accouting.
A. Yes
B. Wrong
Correct Answer: A
Section: (none)
Explanation
QUESTION 293
The function of InARP is the opposite of that of ARP. The main purpose is to reversely resolve the
known target MAC address to the protocol address of the peer device, including the IP address and
IPX address.
A. Yes
B. Wrong
Correct Answer: B
Section: (none)
Explanation
QUESTION 294
The biggest advantage of NAPT is its flexibility, that is, it can be used as a source address
translation, as well as a destination address translation, and as a protocol port.
A. Yes
B. Wrong
Correct Answer: B
Section: (none)
Explanation
QUESTION 295
Refer to the following topology and router configuration. This NAT configuration does not specify a global address
pool for NAT, so address translation cannot be performed correctly.
A. Yes
B. Wrong
Correct Answer: B
Section: (none)
Explanation

Huawei HCNA-HNTD (H12-211) Chinese Test Bank

Uploaded by

Copyright:

Available Formats

Huawei HCNA-HNTD (H12-211) Chinese Test Bank

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Huawei HCNA-HNTD (H12-211) Chinese Test Bank

Uploaded by

Copyright:

Available Formats

Huawei HCNA-HNTD (H12-211) Chinese test bank

A. The first step is to send a multicast packet.

Correct Answer: BCD

A. Authentication domain "Area1"

Huawei question database battle report group: 434299778

--- 10.0.0.2 ping statistics ---

A. The command used by the network administrator is ping -c 2 -s 800 10.0.0.2

Huawei question database battle report group: 434299778

A. Create VLAN2 on SWC.

A. display controller serial

A. Receive only RIPv2 multicast packets.

A. It works normally after aggregation

A. RTA can still learn the routing information published by RTB.

A. The running configuration file is not saved

A. ip route-static 129.1.0.0 16 serial 0

Correct Answer: ACD

A. It is a unicast MAC address

B. It is a broadcast MAC address

C. It is a multicast MAC address

D. It is an illegal MAC address

Correct Answer: ABD

C. Host A and host B cannot communicate at all.

D. Host A and host B can communicate normally

A. RTA is a DTE device

B. FRA is a DTE device

C. FRB is a DCE device

D. The S1/0/1 interface on the RTA is the DCE interface.

A. Forwarding port can receive BPDUs.

C. Forwarding state port can forward data packets.

D. Forwarding port can send BPDUs.

D. ICMP does not support redirection

E. ICMP packets cannot be used to detect MTUs in a path.

A. MAC address + port number

B. IP address + port number

C. Only MAC address

B. The area number range is from 0.0.0.0 to 255.255.255.255

C. The number of the backbone area cannot be 2

D. All networks should be announced in Area 0

Correct Answer: ABC

A. Gigabit Ethernet can only work in full-duplex mode

B. 10 Gigabit Ethernet can only work in full duplex mode

D. Ethernet port mode can be considered as defined

B. The same broadcast domain between SWA and SWB

C. SWA and SWC are both a collision domain

D. SWA and SWC are both a broadcast domain

A. Packets are passed endlessly

B. Increased CPU consumption of the router

C. Increased memory consumption of the router

D. The destination IP address of the packet is constantly modified.

E. The number of bytes in the packet is getting bigger and bigger

A. Two routers will establish a normal full neighbor relationship

C. Two routers will establish a normal full adjacency

D. Two routers will not send hello messages to each other.

B. The switching equipment of the company network must be upgraded

C. The network has a loop on the second floor.

D. No VLAN is configured in the network.

A. PPP cannot be used to deliver IP addresses.

B. PPP supports CHAP and PAP authentication methods.

C. PPP cannot modify keepalive time