CDC600_
CDC600_
CDC600_
Main Specifications
High Sound Quality Frequency Response CD 2 Hz–20 kHz± 0.5 dB
Harmonic Distortion + Noise CD 0.003%
• Pure Direct
Signal-to-Noise Ratio CD 105 dB
• Extremely sophisticated circuitry and layout Dynamic Range CD 96 dB
Output Level CD (1 kHz, O dB) 2 ± 0.3 V
• Short signal paths Dimensions (W x H x D) 17-1/8” x 4-5/8” x 16”
Weight 13.7 lbs.
• High performance DAC for high conversion precision with low noise
• Laser pickup floating mechanism
• Intelligent Digital Servo
1
Compact Disc Changer
HIGH SOUND QUALITY reputation, the acoustic capacitor and the control to command the play, pause, skip and
symmetrically laid out audio board, were forward/backward functions, and song, artist
Designed to Deliver Satisfying carefully selected based on extensive listening and album names will be displayed. Compatible
Sound Quality tests to provide natural and musically iPods are the iPod classic (including 120GB
Inheriting many of the sound quality features of rich playback. classic), iPod nano (2nd Gen., 3rd Gen., 4th
the S2000/S1000 Series components, this CD Gen.) and iPod touch (1st Gen. and 2nd Gen.).
changer delivers sound that will satisfy devoted Laser Pickup Floating Mechanism When the power is on and USB mode is
music fans. In addition to CDs, it also provides The laser pickup is isolated on a floating selected, the iPod charges automatically
high quality play of music files stored on digital mechanism so its delicate operation cannot be
audio players like iPod or USB memory devices affected by vibration. RS-232C Interface and IR In/Out
via a USB port on the front panel. The CD-C600 is equipped with an RS-232C
Intelligent Digital Servo terminal and remote control in/out terminals
Pure Direct Conventional tracking servo circuitry cannot for custom-installed systems. When it is
The CD-C600 provides the same Pure Direct completely overcome errors caused by disc connected to the other components, you can
feature that is a popular feature of Yamaha defects, warpage, dust and so on. This system operate it via the system remote control.
amplifiers and receivers. Pressing the button on uses a dependable DSP (Digital Signal Processor)
the front panel or on the remote control shuts exclusive for CDs to monitor the signal, adjusting 3-Mode CD Text Display
down the digital audio output and turns off the pickup tracking and focus, as well as spindle Get information about the CD currently playing
display. This achieves the lowest possible noise motor speed, to compensate for any problems. right on the CD player’s display. The 3- mode
interference and thus highest sound quality of CD Text display shows the CD’s title, the artist’s
the analog audio output. ADVANCED FEATURES name and the title of the track.
P10021734UCARTB-CDC600@NPB
2