Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 35 views

    ISO 15156-2 2022

    Uploaded by

    7620383tl

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    ISO 15156-2 2022

    Uploaded by

    7620383tl
    35 views4 pages

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    35 views4 pages

    ISO 15156-2 2022

    Uploaded by

    7620383tl

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 4

    ISO 15156-2:2020/Cir.

    2:2022(E)

    INTERNATIONAL STANDARD ISO 15156-2:2020


    TECHNICAL CIRCULAR 2

    Published 2022-10-14

    INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION

    Petroleum and natural gas industries — Materials for use in H2 S-


    containing environments in oil and gas production —
    Part 2:
    Cracking-resistant carbon and low-alloy steels, and the use of cast
    irons
    TECHNICAL CIRCULAR 2

    Industries du pétrole et du gaz naturel — Matériaux pour utilisation dans des environnements contenant de
    l'hydrogène sulfuré (H 2 S) dans la production de pétrole et de gaz —

    Partie 2: Aciers au carbone et aciers faiblement allieés résistants à la fissuration, et utilisation de fontes

    CIRCULAIRE TECHNIQUE 2

    Technical Circular 2 to ISO 15156-2 was prepared by the ISO 15156 Maintenance Agency on behalf of
    Technical Committee ISO/TC 67, Oil and gas industries including lower carbon energy.

    ICS 75.180.01 Ref. No. ISO 15156-2:2020/Cir.2:2022(E)


    Published by the ISO 15156 Maintenance Agency (DIN-Germany)

    1
    Copyright NACE International
    Provided by Accuris under license with NACE
    No reproduction or networking permitted without license from Accuris © ISO 2022 – All rights reserved
    ISO 15156-2:2020/Cir.2:2022(E)

    Foreword
    The establishment of the ISO 15156 Maintenance Agency was confirmed by the ISO Technical
    Management Board in June 2007. A copy of the TMB Vote-Form Number: 34/2007 giving the rules of
    procedure for the maintenance agency can be obtained from the ISO TMB Secretariat. It is also available
    from the ISO 15156 website at www.iso.org/iso15156maintenance.
    ISO 15156 series has, since publication, been amended by a number of Technical Corrigenda and
    Technical Circulars and consists of the following parts, under the general title Petroleum and natural gas
    industries — Materials for use in H2S-containing environments in oil and gas production:

     Part 1: General principles for selection of cracking-resistant materials (2020)

     Technical Circular 1, ISO 15156-1:2020/Cir.1:2021(E) (2021-12-09)

     Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons (2020)

     Technical Circular 1, ISO 15156-2:2020/Cir.1:2021(E) (2021-12-09)

     Technical Circular 2, ISO 15156-2:2020/Cir.2:2022(E) (2022-10-14)

     Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (2020)

     Technical Circular 1, ISO 15156-3:2020/Cir.1:2021(E) (2021-12-09)

     Technical Circular 2, ISO 15156-3:2020/Cir.2:2022(E) (2022-10-14)

    As applicable, subsequent publications resulting in new editions of an individual part of ISO 15156,
    effectively replace the corresponding set of documents shown above. Information on the latest status of
    these documents can be obtained from www.iso.org/iso15156maintenance.

    Changes to ISO 15156-2:2020 and, where appropriate, to Technical Circular 1,


    ISO 15156-2:2020/Cir.1:2021(E) (2021-12-09) shown above introduced by this Technical Circular 2,
    ISO 15156-2:2020/ Cir.2:2022(E), are shown in the document below in blue.

    © ISO 2022 – All rights reserved


    Copyright NACE International
    Provided by Accuris under license with NACE
    No reproduction or networking permitted without license from Accuris 2
    ISO 15156-2:2020/Cir.2:2022(E)

    Page 2, Normative references

    Replace Clause 2 with the following:

    2 Normative references

    The following documents are referred to in the text in such a way that some or all of their content
    constitutes requirements of this document. For dated references, only the edition cited applies. For
    undated references, the latest edition of the referenced document (including any amendments) applies.
    ISO 6506 (all parts), Metallic materials — Brinell hardness test

    ISO 6507 (all parts), Metallic materials — Vickers hardness test

    ISO 6508 (all parts), Metallic materials — Rockwell hardness test

    ISO 6892-1, Metallic materials — Tensile testing — Part 1: Method of test at room temperature

    ISO 10423, Petroleum and natural gas industries — Drilling and production equipment — Wellhead and christmas
    tree equipment

    ISO 13847, Petroleum and natural gas industries — Pipeline transportation systems — Welding of pipelines

    ISO 15156-1:2020, Petroleum and natural gas industries — Materials for use in H 2 S-containing environments in oil
    and gas production — Part 1: General principles for selection of cracking-resistant materials

    ISO 15156-3, Petroleum and natural gas industries — Materials for use in H 2 S-containing environments in oil and
    gas production — Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys

    API 1104, Welding of Pipelines and Related Facilities 1)

    API Specification 6A, Specification for Wellhead and Tree Equipment

    CSA Z662, Oil and gas pipeline systems 2)

    NACE TM0177 3), Laboratory testing of metals for resistance to sulfide stress cracking and stress corrosion
    cracking in H 2 S environments

    NACE TM0284, Evaluation of pipeline and pressure vessel steels for resistance to hydrogen-induced cracking

    NACE TM0316, Four-point bend testing of materials for oil and gas applications

    SAE AMS-2430 4), Shot Peening

    1) www.api.org

    2) www.csagroup.org

    3) www.ampp.org

    4) www.sae.org

    3
    Copyright NACE International
    Provided by Accuris under license with NACE
    No reproduction or networking permitted without license from Accuris © ISO 2022 – All rights reserved
    ISO 15156-2:2020/Cir.2:2022(E)

    Page 23, A.2.2.4 Bolting and fasteners

    Replace A.2.2.4 with the following:

    A.2.2.4 Bolting and fasteners

    Bolting that can be exposed directly to a sour environment, or that is buried, insulated, equipped with
    flange protectors or otherwise denied direct atmospheric exposure or direct open seawater exposure,
    shall conform to the general requirements of A.2.1.
    Designers and users should be aware that it can be necessary to lower equipment pressure ratings
    when using SSC-resistant bolting and fasteners. The use of SSC-resistant bolting and fasteners with API
    flanges shall be in accordance with API Specification 6A or ISO 10423.

    Table A.4 — Acceptable bolting materials

    Bolts Nuts
    ASTM A193 grade B7M
    ASTM A194 grades 2HM, 7M
    ASTM A320 grade L7M

    © ISO 2022 – All rights reserved


    Copyright NACE International
    Provided by Accuris under license with NACE
    No reproduction or networking permitted without license from Accuris 4

    You might also like