00B0F0

FF0000CA NO. DDG & CE (V)/TOKEN/08 OF 2023-2024 0000FFSerial Page No. 38

00B0F0SCHEDULE "A" (CONTD..,)

Item Rate BoQ

Validate Print Help

Tender Inviting Authority: DDG & CE, DGNP, VISAKHAPATNAM

Name of Work: PROVISION OF COMPOUND WALL FOR TECHNICAL BUILDINGS AT NAOB (WP-12), RAMBILLI NEAR VISAKHAPATNAM.

Contract No: CA NO. DDG & CE (V)/TOKEN/08 OF 2023-2024

Name of
the
Bidder/
Bidding
Firm /
Compan
y:
SCHEDULE "A"
(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is
liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

Sl. Item Description Quantity Units RATE including TOTAL AMOUNT QUOTED RATE
No. all taxes In With all Taxes in In Words
Figures To be
entered by the
Bidder
Rs. P. Rs. P.

1 2 3 4 5 6 7
1 Surface dressing n. exc 15 cm in depth and getting out in 7103.20 Sqm 0.00 #VALUE!
soft/loose soil including disposal of soil to a distance not
exceeding 50 Mts etc., complete all as specified and as directed
by the Engineer-in-Charge.

2 All as per Item No. 1 here-in-before but in hard/dense soil 3000.00 Sqm 0.00 #VALUE!
complete.
 00B0F0
FF0000CA NO. DDG & CE (V)/TOKEN/08 OF 2023-2024 0000FFSerial Page No. 39
00B0F0SCHEDULE "A" (CONTD..,)

Sl. Item Description Quantity Units RATE including TOTAL AMOUNT QUOTED RATE
No. all taxes In With all Taxes in In Words
Figures To be
entered by the
Bidder
Rs. P. Rs. P.

1 2 3 4 5 6 7
3 Clearance of jungle in proposed alignment for compound 10103.20 Sqm 0.00 #VALUE!
wall/structure including cutting of bushes any girth, shurbs,
trunks, stump roots, branches of trees, grass weed including
required excavation, removal and disposal of unserviceable
materials and rubbish to a distance not exceeding 50 Mts etc.,
complete all as specified and as directed by the Engineer- in-
Charge.
4 Excavating in post holes (or similar holes) in any type of soil each 860.00 Each 0.00 #VALUE!
n exc 0.5 Cu.m., getting out, returning, filling in and ramming
earth or broken rubble mixed with earth around in layers n exc
25cm, watering and removing surplus soil to outside MD land as
directed by GVMC and making good surface complete all as
specified and as directed by the Engineer- in-Charge.
5 Excavation over areas n. exc. 1.5m deep for foundations, beams, 5348.20 Cum 0.00 #VALUE!
Pile caps and getting out in soft /loose soil complete all as
specified and as directed by the Engineer-in-Charge.

6 All as per Item No. 5 here-in-before but in soft/ disintegrated 5348.20 Cum 0.00 #VALUE!
rockl complete.

7 Excavation in trenches n. exc. 1.5m wide and n. exc.1.5m in 811.20 Cum 0.00 #VALUE!
depth for foundations, pile cap, beams, shafts, wells, manholes,
pier holes, laying of under ground cables or pipe etc., n exc 10 sq
m on plan and getting out in soft/loose soil all as specified and as
directed by the Engineer-in-Charge.

8 All as per Item No. 7 here-in-before but exc.1.5m and up to 121.68 Cum 0.00 #VALUE!
3.00m in depth complete.
 00B0F0
FF0000CA NO. DDG & CE (V)/TOKEN/08 OF 2023-2024 0000FFSerial Page No. 40
00B0F0SCHEDULE "A" (CONTD..,)

Sl. Item Description Quantity Units RATE including TOTAL AMOUNT QUOTED RATE
No. all taxes In With all Taxes in In Words
Figures To be
entered by the
Bidder
Rs. P. Rs. P.

1 2 3 4 5 6 7
9 All as per Item No. 7 here-in-before but in soft/ disintegrated 1262.52 Cum 0.00 #VALUE!
rockl complete.

10 Removal of excavated material to a distance n. exc. 50 m and 9232.11 Cum 0.00 #VALUE!
depositing where directed at a level not exceeding 1.50m above
the starting point complete all as specified and as directed by the
Engineer-in-Charge.

11 Returning, filling in including, spreading, levelling, watering and 6964.96 Cum 0.00 #VALUE!
well ramming in layers n. exc. 25cm thick complete all as
specified and as directed.

12 Material & labour for drilling or boring for 800mm nominal dia. 3120.00 RM 0.00 #VALUE!
bored cast-in-situ piles, through any or all types of strata i.e
soft/loose soil, stiff clay, gravel, cobble stone, compact moorum,
soft conglomerate or loose boulders, disintegrated rock,
weathered rocks etc., (except hard rock for socketing depth) upto
top of socketing depth/founding depth by adopting DMC (Direct
Mud Circulation) method with perennial water and disposal of
drilling/bored materials to a distance n.exc 50m. and depositing
where directed complete all as specified and as directed by
Engineer-in-Charge.

13 All as per Item No. 12 here-in-before but 600mm nominal dia 11960.00 RM 0.00 #VALUE!
 00B0F0
FF0000CA NO. DDG & CE (V)/TOKEN/08 OF 2023-2024 0000FFSerial Page No. 41
00B0F0SCHEDULE "A" (CONTD..,)

Sl. Item Description Quantity Units RATE including TOTAL AMOUNT QUOTED RATE
No. all taxes In With all Taxes in In Words
Figures To be
entered by the
Bidder
Rs. P. Rs. P.

1 2 3 4 5 6 7
13.1 Notes for Item Nos. 12 to 13 :-
(i) The depth of boring for piles shall be measured from existing
ground/sea bed level/river bed top (as per soundings/reduced
levels taken at the commencement of work) to the approved
founding level.
(ii) It shall be ensured that the waste bentonite slurry/ drilled or
bored material is pumped off from the premises to locations
shown by GE by contractor at his own cost. The distance
mentioned in description of item shall be the shortest distance
from the centre of the building.
(iii) All channels/tanks made for bentonite circulations shall be
filled with approved moorum obtained by contractor at his cost
after clearing all bentonite cakes.
(iv) The contractor may use any approved method as approved by
GE for boring without any extra cost to the Govt. The rates for
boring of piles shall be inclusive of any method/ casing that may
be used by the contractor for bored piles. Nothing extra shall be
paid.
(v) The rates quoted by the contractor shall be inclusive of the
rates for the shifting and setting up of piling rig as many times as
required.

14 Carrying out initial load tests on test piles in land as per standard 1.00 Each 0.00 #VALUE!
procedure laid down in IS-2911 by static load test method
including compressive strength including construction of test cap,
dismantling the cap after the test and clearing the site and
maintaining complete records of load settlements etc. as specified
and directed by GE and submission of reports for a test load of
2.50 times of design load (Design load 55 MT) in non-working
areas in the vicinity, including the cost of new piles for 800mm dia
with specification as same as working pile etc all as specified and
directed.

15 All as per Item No. 14 here-in-before but 600mm nominal dia. for 1.00 Each 0.00 #VALUE!
a test load of 2.50 times of design load (Design load 55 MT).
 00B0F0
FF0000CA NO. DDG & CE (V)/TOKEN/08 OF 2023-2024 0000FFSerial Page No. 42
00B0F0SCHEDULE "A" (CONTD..,)

Sl. Item Description Quantity Units RATE including TOTAL AMOUNT QUOTED RATE
No. all taxes In With all Taxes in In Words
Figures To be
entered by the
Bidder
Rs. P. Rs. P.

1 2 3 4 5 6 7
16 Carrying out routine load test (working pile) in land as per 3.00 Each 0.00 #VALUE!
standard procedure given in IS-2911 (Part IV) 1985 by static test
method for 800mm dia. Piles for a test load of 1.50 times of
design load (Design load 55 MT) complete all as specified and as
directed by Engineer-In-Charge

17 All as per Item No. 16 here-in-before but 600mm nominal dia. for 10.00 Each 0.00 #VALUE!
a test load of 1.50 times of design load (Design load 55 MT).

Note for item No. 16 & 17:- The pile shall be selected by the
GE. The method of testing adopted by the contractor shall be as
approved by Accepting Officer.

18 M&L for PCC 1:3:6 type C2 (using 40mm graded Granite stone 417.64 Cum 0.00 #VALUE!
aggregate) as in foundation filling, mass concrete and underneath
pile caps, beams, plinth protection etc. complete all as specified
and as directed by the Engineer-in-Charge.

19 M&L for PCC 1:4:8 type D2 (using 40mm graded Granite stone 84.17 Cum 0.00 #VALUE!
aggregate) as in foundation filling, mass concrete and underneath
pile caps, beams, plinth protection etc. complete all as specified
and as directed by the Engineer-in-Charge.

20 M&L for Providing, cement concrete (1:2:4) type B1 (using 20mm 41.40 Cum 0.00 #VALUE!
graded granite stone aggregate) in lintels upto 1.5m clear span,
cills, steps; seismic and other similar bands, plinth courses, string
courses, lacing courses, parapets and railings upto 60 cm in
height, copings, kneelers, apex stones, bed plates, water troughs,
surface channel benching/ haunching and the like including
weathering, slightly rounded or chamfered angles and throating,
complete all as specified and as directed by Engineer-in-charge.
 00B0F0
FF0000CA NO. DDG & CE (V)/TOKEN/08 OF 2023-2024 0000FFSerial Page No. 43
00B0F0SCHEDULE "A" (CONTD..,)

Sl. Item Description Quantity Units RATE including TOTAL AMOUNT QUOTED RATE
No. all taxes In With all Taxes in In Words
Figures To be
entered by the
Bidder
Rs. P. Rs. P.

1 2 3 4 5 6 7
21 M&L for reinforced cement concrete (Ready mix concrete) by 4761.42 Cum 0.00 #VALUE!
design mix M-40 grade (Using 20mm graded stone aggregate) as
in bore holes using Portland slag cement and admixture conplast
SP-430 A2 or equivalent for piles in tremie method including
necessary dewatering, formwork, concrete mixed in RMC plant,
transporting, placing, compacting, vibrating etc., complete all as
specified and directed by the Engineer-in-Charge.

21.1 Notes :-
(i) Design mix shall be as per IS-456-2000 and max size of
aggregate shall not exceed 20mm and the slump shall be 150 to
180mm.
(ii) Reinforcement shall be measured and paid separately.
(iii) Unit rate shall be deemed to include interalia for preliminary
design mix, works test cubes as specified.
(iv) Minimum cement content shall be 400 Kg/ Cu.m. of concrete
for M40 (Piles) using Portland slag cement with minimum slag
content of 50% (fifty percent) which ever is higher.
(v) Admixture shall be added as per manufacturer instructions.
The rate for Admixture Conplast SP-430 A2 or Equivalent shall be
deemed to be included in the quoted rate.
(vi) The unit rate shall be deemed to include carrying out non-
destructive integrity test for 100% of the total number of piles as
per IS 14893-2001 shall be done by Government Engineering
College / IIT Chennai in the presence of contractor and the test
results shall be vetted by the same authorities. Cost of testing
including in the quoted rates.
(vii) In case at the time of mix design cement content is increased
beyond minimum content given no extra payment will be made.
(viii) Standard manufactured cover blocks as per IS should be
used, site cast cover blocks not be used.
 00B0F0
FF0000CA NO. DDG & CE (V)/TOKEN/08 OF 2023-2024 0000FFSerial Page No. 44
00B0F0SCHEDULE "A" (CONTD..,)

Sl. Item Description Quantity Units RATE including TOTAL AMOUNT QUOTED RATE
No. all taxes In With all Taxes in In Words
Figures To be
entered by the
Bidder
Rs. P. Rs. P.

1 2 3 4 5 6 7
22 M&L for reinforced cement concrete of grade M-40 (Design mix 138.24 Cum 0.00 #VALUE!
using 20mm graded stone aggregate) using ready mix concrete
including supply and mixing of admixtures, as in foundations,
including rafts, footings, foundation beams, plinth beams, bases
for columns, pile caps, suspended floor beams & slabs, plinth
protection, basement slabs, under-reamed piles etc. using
Portland slag cement and handling, conveyance, errection with
alignment in true position complete all as specified and as
directed by the Engineer-in-Charge.
23 All as per item No. 22 here-in-before but as in columns, Pillars, 1340.64 Cum 0.00 #VALUE!
piers, vertical bands, posts and struts etc complete.

24 All as per item No. 22 here-in-before but as in floor beams, brace 1556.10 Cum 0.00 #VALUE!
beams, roof beams, cantilevers, bressumers, middle beams,
lintels over 1.5m span and lintel bands etc complete.

25 All as per item No. 22 here-in-before but as in retaining wall, 1803.12 Cum 0.00 #VALUE!
basement wall, perapet and railings exc. 60cm in height, newels,
balustrade, wall and the like complete.

26 M&L for reinforced cement concrete pre cast beams of grade M-40 411.86 Cum 0.00 #VALUE!
(Design mix using 20mm graded stone aggregate) using ready
mix concrete including supply and mixing of admixtures, includes
the feeding, mixing, moulds, formwork, shifting and placing of pre
cast units, loading of item from stack yard, shifting to location and
errection with alignment in true position complete all as specified
and directed by the Engineer-in-Charge.
 00B0F0
FF0000CA NO. DDG & CE (V)/TOKEN/08 OF 2023-2024 0000FFSerial Page No. 45
00B0F0SCHEDULE "A" (CONTD..,)

Sl. Item Description Quantity Units RATE including TOTAL AMOUNT QUOTED RATE
No. all taxes In With all Taxes in In Words
Figures To be
entered by the
Bidder
Rs. P. Rs. P.

1 2 3 4 5 6 7
27 All as per item No. 26 here-in-before but as in wall panels to 1766.40 Cum 0.00 #VALUE!
compound wall complete.

28 All as per item No. 26 here-in-before but as in columns to 400.00 Cum 0.00 #VALUE!
compound wall complete.

28.1 Notes for item Nos. 22 to 28:

(i) Minimum cement content shall be 400 Kg/Cu.m. of concrete for
pile caps, suspended floor beams, slabs and footings, platform
(Covered under item No. 22) and cement content shall be 360
Kg/Cu.m. of other concrete items for M-40 using Portland slag
cement with minimum slag content of 50% (fifty percent) for
items covered under item Nos. 23 to 28.
(ii) Design mix shall be as per IS-456-2000. Maximum size of
aggregate shall not exceed 20 mm and slump shall be 50mm to
100mm and maximum water cement ratio 0.4.
(iii) Unit rate shall be deemed to include for interalia for
preliminary design mix and works test cubes.
(iv) Reinforcement shall be measured and paid for separately.
(v) In case at the time of mix design cement content is increased
beyond minimum content given above, no extra payment will be
made.
(vi) Standard manufactured cover blocks as per IS should be used,
Site cast cover blocks shall not be used
 00B0F0
FF0000CA NO. DDG & CE (V)/TOKEN/08 OF 2023-2024 0000FFSerial Page No. 46
00B0F0SCHEDULE "A" (CONTD..,)

Sl. Item Description Quantity Units RATE including TOTAL AMOUNT QUOTED RATE
No. all taxes In With all Taxes in In Words
Figures To be
entered by the
Bidder
Rs. P. Rs. P.

1 2 3 4 5 6 7
29 Chipping of laitance concrete in piles above cut off level upto a 181.98 Cum 0.00 #VALUE!
maximum of 1m from cut of level and disposal to distance of exc.
50 m but n. exc. 250 m and depositing where directed.

30 M&L for Use and waste steel formwork to sides of concrete 5647.80 Sqm 0.00 #VALUE!
foundations, pile caps, footings, bases of columns, rafts and raft
beams, sides and soffits (if any) of foundation and plinth beams
and similar work vertical or to batter for rough finished surfaces of
concrete complete all as specified and as directed by Engineer-in-
Charge.
31 M&L for Use and waste steel formwork to sides, faces of vertical 18031.20 Sqm 0.00 #VALUE!
walls, water tanks, retaining walls, abutments, parapets and
staircase railings and similar work including attached pillasters,
buttresses, etc. vertical or to batter and the like for fair finished
surfaces of concrete complete all as specified and as directed by
the Engineer-in-Charge

32 All as per item No. 31 here-in-before but to sides of pillars, posts, 14656.32 Sqm 0.00 #VALUE!
struts, columns, stanchions and the like complete.

33 M&L for reinforcement in any situation using Corrosion resistant 1644970.00 Kg 0.00 #VALUE!
TMT steel bars of grade Fe-500D, 10mm dia and over, cut to
length, bent to shape required, including cranking, bending
spirally for hooping for columns, hooking ends and binding with
and including mild steel wire (annealed) not less than 0.9mm dia.
or securing with clips complete all as specified and as directed by
the Engineer-in-Charge.
 00B0F0
FF0000CA NO. DDG & CE (V)/TOKEN/08 OF 2023-2024 0000FFSerial Page No. 47
00B0F0SCHEDULE "A" (CONTD..,)

Sl. Item Description Quantity Units RATE including TOTAL AMOUNT QUOTED RATE
No. all taxes In With all Taxes in In Words
Figures To be
entered by the
Bidder
Rs. P. Rs. P.

1 2 3 4 5 6 7
34 All as per item No. 33 here-in-before 6mm dia and upto 8mm dia 40500.00 Kg 0.00 #VALUE!
bars complete.

Note for Item Nos. 33 & 34:- The lap length of reinforcement
will be measured and paid under relavent items as per SSR/ IS

35 M&L for providing and installing MS liner for bored cast-in-situ 641473.74 Kg 0.00 #VALUE!
concrete piles with necessary stiffeners, driving shoe with
continuous welding including cutting, bending welding etc.
confirming to Fe 410-W (Gde E-250 Quality A) as per
manufacturers instructions complete all as specified and as
directed by the Engineer-in-Charge.
Notes:-
(i) Rate shall be inclusive of cutting the liner at cut off
level. The rate is deemed to include for cutting, removal and
salvage value of the material so obtained.
(ii) MS liner shall be driven upto 10m from cut off level.
(iii) MS liner will be measured and paid up to the cut off level only
of pile. Additional MS liner if used for convenience of construction
shall be included in the rates quoted. Nothing extra shall be paid
separately on this account.

36 Supply and fix framed work as in doors or gates of angle or other 14400.00 Kg 0.00 #VALUE!
section with gusset plates, rails, braces, etc., complete, drilled for
fixing of steel sheeting or other covering. Doors, etc. to be
prepared for hanging or sliding with and including either hooks
and hinges or steel hanging door fittings (exclusive of steel
sheeting or other covering, running rails and guides) and
hanging; also fastening and fixing Gde E-165 (Fe-290) complete
all as specified and as directed by the Engineer-in-charge.
 00B0F0
FF0000CA NO. DDG & CE (V)/TOKEN/08 OF 2023-2024 0000FFSerial Page No. 48
00B0F0SCHEDULE "A" (CONTD..,)

Sl. Item Description Quantity Units RATE including TOTAL AMOUNT QUOTED RATE
No. all taxes In With all Taxes in In Words
Figures To be
entered by the
Bidder
Rs. P. Rs. P.

1 2 3 4 5 6 7
37 S&F mild steel joist , channel, angle or tee sections fixed 32341.00 Kg 0.00 #VALUE!
independently without connecting plates etc cut to length if
required & confirming to Fe 410-W (Gde E-250) quality B
complete all as specified and as directed by the Engineer-in-
charge.

38 S&F MS Plates (plain or chequered) channels, square cut or 1620.24 Kg 0.00 #VALUE!
notched (ordinary and counter sunk) forming holes, without any
attachment confirming to Fe-410-W (Gde E-250 quality B)
complete all as specified and as directed by the Engineer-in-
charge.

39 S&F concertina coil fencing with punched tape concertina coil. 4458.00 RM 0.00 #VALUE!
610mm dia 7 to 8 coils per running meter, upto 7m height of wall
with existing angle iron 'Y' shaped placed 2.4m or 3.00m apart
and with horizontal R.B.T reinforced barbed wire, stud tied with GI
staples and GI clips -to retain horizontal and including barbed wire
04 nos on each side of 'Y' angle and 02 nos on vertical of 'Y'
angle, With necessary 'bolts or GI barbed wire tied to angle iron;
with reinforced barbed tape (R.T.B)/ spring core thick wire of high
tensile strength of 165kg/Sqmm with tape (0.52mm thick) and
Weight 43.478gm/meter (cost of MS angle, CC blocks shall be
paid separately) complete all as specified and as directed by the
Engineer-in-charge.

Note:-
(i) After stretching the coil, the length of compound wall on which
it has been stretched shall be measured as one RM.
(ii) Provn of 'Y' shaped MS angle shall be measured and paid
separately.
 00B0F0
FF0000CA NO. DDG & CE (V)/TOKEN/08 OF 2023-2024 0000FFSerial Page No. 49
00B0F0SCHEDULE "A" (CONTD..,)

Sl. Item Description Quantity Units RATE including TOTAL AMOUNT QUOTED RATE
No. all taxes In With all Taxes in In Words
Figures To be
entered by the
Bidder
Rs. P. Rs. P.

1 2 3 4 5 6 7
40 S&F PVC coated GI chain link fencing 100mmx100mm aperture, 4478.00 Sqm 0.00 #VALUE!
4mm dia including binding with MS round bar complete all as
specified and directed by the Engineer-in-Charge.

Note: MS round bar shall be measured and paid separately under

relevant items

41 Supply and Fix 25 mm thick bitumastic pad complete all as 475.88 Sqm 0.00 #VALUE!
specified and as directed by the Engineer-in-Charge.

42 M&L for preparing newly plastered surfaces of walls and applying 31206.00 Sqm 0.00 #VALUE!
two coats of cement based paint over one coat of primer
complete all as specified and as directed by the Engineer-in-
charge.

43 M&L for preparation of new or previously untreated surfaces of 895.00 Sqm 0.00 #VALUE!
steel or steel based surfaces of any description, not otherwise
described, over 10 cm in width or girth and applying two coats of
synthetic enamel paint over a coat of primer complete all as
specified and directed.

Total in F Total Amount in Figures 0.00 #VALUE!

Quoted RaQuoted Amount in Words #VALUE!

Please Enable Macros to View BoQ information
iew BoQ information