MILL TEST CERTIFICATE Jindal Stainless Limited.

(INSPECTION CERTIFICATE) IS 6911

Jajpur,Odisha
In Accordance with EN 10204 :2004 Type 3.1

CM/L-5200020363
a6c911jngMDE4NTA5MDc=
CUSTOMER :ACCURATE METALS & ALLOYS LLP CERTIFICATE NO. :JSL-JRD/QA/2024-25/DOM/01850907
CITY :Mumbai DATE :25.05.2024
P.O.NO. :1451304_AMA/1038/GOODWILL/PPP/15JUN PO DATE:19.05.2024 VEHICLE NO. :NL01G1587
CUSTOMER SPECIFICATION :As per OA/PO agreement SALES ORDER NO. :0558105923
SHIPMENT/DELIVERY NO. :6300150076 NET WT(MT) :12.260

Material Description/Product Grade / Type Material Specifications Process-Route

STAINLESS STEEL 316L/316 ASTM A240/A240M-23A, ASME SA-240/SA-240M 2023 SEC. II, EF-AOD-LRF-CCS
PART A, IS 6911:2017 AMD. 3

PHYSICAL DESCRIPTION
SR BATCH NO. PARENT COIL NO. PKT/PALLET WEIGHT NO. OF HEAT NO. THK WIDTH LENGTH FINISH EDGE QUALITY
NO. / PLATE NO. NO. (MT) PCS (mm) (mm) (mm)
1 Q069205303 0001039570 6.135 1 40307B03 4.000 1,500.00 COIL N1 Mill Edge PRIME
2 Q069211104 0001039496 6.125 1 40408H25 5.000 1,500.00 COIL N1 Mill Edge PRIME

CHEMICAL ANALYSIS (LADLE)

HEAT NO. %C %Mn %S %P %Si %Ni %Cr %N %Mo %Cu %Ti %Nb %Al
40307B03 0.023 1.23 0.002 0.034 0.37 10.01 16.90 0.037 2.02 - - - -
40408H25 0.019 1.23 0.002 0.038 0.34 10.03 16.68 0.040 2.03 - - - -

MECHANICAL PROPERTIES:SAMPLE DIRECTION - TRANSVERSE

Sr Rp 0.2/ Rp 1.0 Rm/ %EL %EL %EL Hardness Bend Test
No. YS Mpa TS GL= 50 GL= 80 GL= 5.65 SO HRBW
Mpa Mpa mm mm mm

1 362 - 642 53 - - 81 / 82 -

2 352 - 644 53 - - 80 / 81 -

ADDITIONAL INFORMATION
1)- MATERIAL HAS BEEN SOLUTION ANNEALED AT MIN 1040º C & QUENCHED IN WATER.
2)- ABOVE MATERIAL ALSO CONFIRM TO IS 6911:2017 AMD. 3 GRADE 316L/316.
3)- MATERIALS CONFIRM TO THE REQUIREMENTS AS PER ASTM A480/A480M-23B & ASME SA-480/SA-480M SEC. II PART A-2023.

* THE ABOVE MATERIAL FULLY CONFORMS TO IS 6911:2017 AMD 3 CHEMICAL & MECHANICAL PROPERTIES OF
PRODUCT AS TESTED IN ACCORDANCE WITH THE SCHEME OF TESTING & INSPECTION CONTAINED
IN BIS CERTIFICATION.
HOT ROLLED FINISHES : (BL, ANN, N1, 1D, CHQ) & COLD ROLLED FINISHES: (2E, 2D, 2B, BA, NO.4, HL)
PLATE:- MATERIAL 5.00 MM AND OVER IN THICKNESS AND OVER 250 MM IN WIDTH (AS PER ASTM/ASME STANDARD) & THICKNESS 3 MM OR OVER (AS PER DIN STANDARD)
SHEET:- MATERIAL UNDER 5.00 MM IN THICKNESS AND 600 MM AND OVER IN WIDTH (AS PER ASTM/ASME STANDARD) & THICKNESS LESS THAN 3 MM (AS PER DIN STANDARD)
COIL:- IN "PHYSICAL DESCRIPTION"- LENGTH MENTIONED AS "COIL".

Jindal Stainless Limited, This is hereby certified that the material was manufactured, sampled, tested & inspected in accordance ISO 9001 : 2015
Kalinga Nagar Industrial Complex, with requirements of the material specification and has been found to meet the requirements of order. ISO 14001 : 2015
PO: Danagadi , Jajpur The material supplied under this Test Certificate is free from any radioactive contamination as checked ISO 45001 : 2018
Odisha - 755026, India. by procedures established by Jindal Stainless Limited as per the recommendations provided by AERB. ISO 50001: 2018
TEL :+91-9078899031, IATF 16949 : 2016
FAX :+91-06726-266006 CERTIFIED COMPANY
Email: QualityMTC@jindalstainless.com Format Ref: JSLO/F/QA-CRM/32 Rev.01
Eff Date: 24/09/2021

Any unauthorised usage of this Test Certificate will warrant Legal Action.
1/1