TO BE THE BEST

SUPPLIER OF PUMP INDUSTRY

HEBEI TONGDA PUMP CO.,LTD

 Company Introduction
Hebei Tongda Pump Co., Ltd is located in Baoding city of Hebei Province, near Beijing and Tianjin.

Tongda Pump is established in 1995 with a registered capital of 50 billion Yuan. We have been

manufacturing pumps and provide engineering service for customers from various industries.Now we

have a staff of about 450, which includes 128 senior and intermediate professional technicians. Our

factory covers an area of 95,000 ㎡ and we have over 200 sets of production equipment.

We have got the Quality management system certificate ISO9001:2015, environment management

system certificate ISO14001:2015 and Occupational health and safety management system certificate

OHSAS180001:2007. Tongda pump has won the award of Creditable Company, Famous Trademark and

Famous Brand Enterprise of Hebei province many times.

In 2010, we build a new factory. And we can produce water pump more than 12,000 sets and accessories

more than 3,800 ton now. Our products covers desulphurization pump, slurry pump, chemical pump,

mud pump, water pump and so on. We mainly provide solutions for various industries, such as mining,

metallurgy,electric power, petroleum, chemical, and paper-making.

We understand our customers’ world and the daily challenges they face. Bear in mind our enterprise

spirit of Entrepreneurship, innovation and excellence, we are continuously improving our R&D, technique,

process, and looking for new ways to help our customers achieve their goals.

TD PUMP are specialists in delivering and supporting pump Equipment

Solutions including slurry pump，mud pump,in-line pump,water pump,chemical

pump,sewage pump...etc for global mining and mineral processing, the power

sector, and general industry.

 Production strength
Now we have more than 200 sets of equipment,5 work shops,300 staff for casting, heat treatment,
machining, assembly, testing...etc
One time acceptance rate of finished products 98%,Customer satisfaction rate 95%,Contract performance
rate 100%,Service timeliness rate 100%
ZGM Sic Slurry Pumps

MAIN FEATURES
1.According to the wear performance test of ZGM industrial ceramic pump is
the contrast material in the Institute of manufactured by using the
Wear-resistant Materials of the University, it is "ceramic+metal" composite manufacturing
proved that the wear resistance of silicon process. The core technology is based on
carbide ceramic material is 3.15 times higher the efficient hydraulic model of the metal
than that of high chromium alloy (Cr30). pump, which is especially suitable for
2.The pump shell and guard plate lining are conveying highly abrasive and corrosive
made of silicon carbide ceramic, and the media.
external metal armor is used. The overall Ceramic materials are professional and
reliability of the pump is high, the safety is reliable. According to the characteristics of
good, and the disassembly is convenient. conveying slurry, the ceramic material with
3.The special ingredients and process of high strength, wear resistance and
ceramic materials ensure that the metal shell corrosion resistance is developed. The
and ceramic lining are integrated and tightly unique casting technology ensures the
combined. reliability of the combination of ceramic
4.The ceramic impeller is made of ceramic material and metal parts.
lined 316L stainless steel shaft head structure
and silicon carbide ceramic material as a
whole. The mechanical strength, wear
resistance and corrosion resistance of the
impeller are fundamentally guaranteed.
5.The impeller can be adjusted axially to
maintain the reasonable position of the
impeller in the pump cavity and ensure that the
operation of the pump is always in an efficient
and stable state.
APPLICATION AREA
ZGM Ceramic Slurry Pump mainly used for
strongly acidic or alkaline liquid，the diameter
of the particle below 32mm. It is applicable to
mining, metallurgy, electric power, coal,
chemical industry, building materials and
other industries to transport abrasive and
corrosive slurry containing solid particles,
such as power plant ash transportation, coal
slurry transportation, metallurgical
concentrator slurry transportation, coal
washing plant coal slurry and heavy medium
transportation, etc. The maximum weight
concentration of its solid-liquid mixture:
mortar 45%, slurry 60%.
STRUCTURE AND MATERIAL

1. Coulping Pin coulping/Flexible coulping/Belt connection

2. Locknut Material cast iron
3. Front bearing cover Material cast iron
4. Oil seal Material Fluorine rubber（Long service life than normal material）
5. Ball bearing Brand SKF/NSK/HRB
6. Shaft Material 3Cr13
7. Bearing house Material cast iron
8. Frame cover Material cast iron
9. Frame Material cast iron
10. Ball bearing Brand SKF/NSK/HRB
11. Oil seal Material Fluorine rubber（Long service life than normal material）
12. Rear bearing cover Material 45#/SS316/Duplex SS
13. Water-Resistant Ring Material 45#/SS316/Duplex SS
14. Key Material 45#/SS316/Duplex SS
15. Packing cover Material 45#/SS316/Duplex SS
16. Bearing sleeve Material 45#/SS316/Duplex SS
17. Spacer sleeve Material 45#/SS316/Duplex SS
18. Graphite Packing
19. Water seal ring Material 45#/SS316/Duplex SS
20. Gland sealing box Material 45#/SS316/Duplex SS
21. Expeller Material 45#/SS316/Duplex SS
22. Protective plate Material Ceramic lining steel
23. Impeller Material Ceramic lining steel
24. Pump body Material ceramic wet parts，Cast steel casing
25. Outlet connection pipe Material cast iron lining ceramic
26. Inlet connection pipe Material cast iron lining ceramic
PERFORMANCE
Flow: 4-2700m ³/ h
Head: 4-133m
Power: 0.58-1200kw
Maximum solid particles: 7-220mm

More details please contact the sales department.

ZJ Centrifugal Slurry Pumps

ZJ series is a single-stage, horizontal

MAIN FEATURES
centrifugal slurry pump. It is a new
type of abrasion-resistant and 1. Excellent hydraulic performance, high
corrosion-resistant slurry pump efficiency, low wear, wide flow channel,
developed by HEBEI TONGDA PUMP anti-clogging and excellent cavitation
CO.,LTD, according to the increasing performance.
practical needs of the slurry pump in 2. The auxiliary impeller+packing combined
the basic industries such as coal, seal, mechanical seal and single packing seal
electricity, metallurgy, chemical are adopted, which are applicable to different
industry, building materials, etc., and operating conditions.
in view of the complexity and 3. The research and development of a variety
particularity of its application of materials make it adapt to different working
conditions. In hydraulic model design, conditions, and the product has a high cost
structural design and wear-resistant performance.
materials used, this series of pumps 4. Large-capacity oil tank, thin oil bath
widely absorb and innovate advanced lubrication, greatly extending the service life of
technologies and research bearings.
achievements at home and abroad, 5. Large bracket design, large shaft diameter
and have the advantages of high design, good rigidity, stable operation.
efficiency, energy saving, small 6. The unique rotor axial adjustment device
vibration, low noise, reliable makes the on-site adjustment of the impeller
operation, long service life, more convenient.
convenient maintenance, etc
APPLICATION AREA
ZJ series products are widely used in
metallurgy, steel plants, coal preparation,
mineral processing, alumina and flue gas
desulfurization projects and peripheral
systems. It is mainly used to transport
abrasive slurry containing solid particles,
such as feed pump of mine, transportation of
various concentrates and tailings, slag
removal of power plant, slag removal of steel
plant, transportation of slime and heavy
medium in coal preparation plant, etc. The
weight concentration of slurry can reach 45%
of mortar and 60% of mineral slurry.

MATERIAL

Cast iron Cr27 Cr30 Rubber

Outer casing 
Impeller   
Throatbush   
FPL insert   
Volute Liner   

Cr27 used for high abrasive liquid，Cr30 for abrasive and corrosive liquid，rubber for corrosive liquid.
STRUCTURE

No Name Material No Name Material

1 Impeller Cr27/Cr30/Rubber 8 FPL insert Cr27/Cr30
2 Volute casing Cr27/Cr30/Rubber 9 Expeller Cast iron
3 Front housing Cast iron 10 stuffing box Cast iron
4 Throughbush Cr27/Cr30/Rubber 11 shaft sleeve 4Cr13
5 Inlet short pipe Cast iron 12 Bracket cover Cast iron
6 Outlet short pipe Cast iron 13 coupling Cast iron
7 Rear housing Cast iron 14 bracket Cast iron
PERFORMANCE
Flow: 4-2700m ³/ h
Head: 4-133m
Power: 0.58-1200kw
Maximum solid particles: 7-220mm

More details please contact the sales department.

TLNH/TLFN Sump Slurry Pumps

TD PUMPS are specialists in delivering and supporting Slurry

Pump Solutions including pumps, hydrocyclones, valves and
wear resistant linings for global mining and mineral processing,
the power sector, and general industry.

We aim to lead the market in application expertise,

service-support and product development.
The strength of TD PUMPS products lies in the
superiority of our hydraulic designs and wear and
corrosion resistant materials.
We has invested heavily in an ongoing programme of
research and development which focuses on the areas
of hydraulic design, materials technology and shaft
sealing.
The TLNH/TLFN heavy duty cantilever sump pump is
designed for applications requiring greater reliability and
durability than conventional vertical process pumps can
offer.
The heavy duty cantilever design makes the
TLNH/TLFN sump pump ideally suited for heavy
continuous handling of abrasive and corrosive liquids
and slurries whilst submerged in sumps or pits.
TLNH/TLFN sump pumps offer you:
• Reliability
-by design.
• Low Spares costs
-from longer wear life.
• Lower Energy costs
-from maintained efficiency.
• After Sales Support
-second to none.
APPLICATION
The rugged TLNH/TLFN Heavy Duty Sump
Pumps are available in a wide range of popular
sizes to suit most pumping applications.
Thousands of these pumps are proving their
reliability and efficiency worldwide in:

• Minerals processing
• Coal preparation
• Chemical processing
• Effluent handling
• Sand and gravel

and almost every other tank, pit or hole-in-the-

ground slurry handling situation.

The TLNH/TLFN design with either hard

metal (TLNF) or elastomer covered (TLFN)
components makes it ideal for:

• Abrasive and/or corrosive slurries

• Large particle sizes
• High density slurries
• Continuous or "snore" operation

TLNH/TLFN Heavy Duty Sump Pumps are

available in various standard lengths to suit
common sump depths, for very deep sumps or
where high shaft speeds limit the length of the
pump, a suction extension pipe can be fitted to
the bottom inlet to extend the depth of the
pump by up to 2 metres.

Pumping is maintained even when the top inlet

is not submerged, thus enabling the level of
liquid to be lowered right down to the bottom
inlet or the bottom of any suction extension
pipe.

To suit special requirements other

pump wet ends can be fitted to the
standard TLNH pump dry end.
STRUCTURE AND MATERIAL

1. Shaft
Steel
2. Upper Bearing Seal
Labyrinth, piston rings and grease purge

3. Upper Bearing
Heavy duty grease lubricated parallel roller

4. Bearing Housing
Cast iron

5. Lower Bearings
Grease lubricated double taper roller

6. Lower Bearing Seal

Lip Seal and Flinger

7. Shims
Allow vertical adjustment of the impeller in the
casing

8. Mounting Plate
TLNH - Steel /TLFN - Elastomer covered steel

9. Column
TLNH - Steel /TLFN - Elastomer covered steel

10. Discharge Pipe

TLNH - Steel /TLFN - Elastomer covered steel

11. Upper Strainer

TLNH - Stainless Steel/TLFN - Polyurethane
12. Back Liner Seal
TLNH - Elastomer

13.Impeller Thread Seal

TLNH - Elastomer

14. Impeller
TLNH - UltraChrome
TLFN - Elastomer moulded metal

15. Casing
TLNH - UltraChrome
TLFN - Elastomer moulded metal

16. Lower Strainer

TLNH - Polyurethane
TLFN - Elastomer moulded metal
PERFORMANCE
Flow: 8-1267m ³/ h
Head: 4-42m
Power: 0.75-200kw
Maximum solid particles: 0-65mm

More details please contact the sales department.

TDT Desulphurization FGD Pumps

TDT desulphurization pumps are MAIN FEATURES

horizontal centrifugal pumps , developed • Reasonable structure, good entire
and researched by our company for performance, steady operation and high
desulphurization purification plant of efficiency.
coal-fired device in the thermal power • The wet part is made of material A49 or
plant, and mainly as absorber recirculation dual-phase steel, with good abrasion
pumps of the wet FGD device to transport resistance and corrosion resistance
the limestone and gypsum slurry. Using the performance and long service life.
features of domestic and foreign similar • The pump is connected with the motor or
products, the product has the advantages reducer by the diaphragm coupling, with good
of broad flow range. safe and liable dynamic balance, strong resistance to shock,
operation, easy to maintain efficient and large transmission torque, steady pump
energy saving, long service life, etc. running and safety and reliability
• The pump structure is rear dismountable，
simple and easy to maintain.No need to
disassemble the suction and rising pipes. The
unique stainless split type impeller
disassembly ring can easily realize the
impeller disassembly
• The rotor part is equipped with the axial
regulating structure to make the pump
machine in the efficiency operating state
always.
STRUCTURE

No. Name Material No. Name Material

1 Impeller A49/Cr30 5 Suction Cover QT500

2 Pump Body A49/Cr30 6 Join Bar QT500

3 Front Guard A49/Cr30 7 Shaft Sleeve 0Cr18Ni12Mo2Ti

4 Back Guard A49/Cr30 8 Machine Seal 316L+Sic

PERFORMANCE
Flow: 8-17500m ³/ h
Head: 6-40m
Power: 4-1800kw
Inlet diameter:25-900mm

More details please contact the sales department.

D/DG/MD Multistage Pumps

MAIN FEATURES
1. The impeller, guide vane and other flow
WORKING CONDITIONS
passage components are optimized and
designed by CFD flow field analysis Nominal speed: 2980/1480 r/min
technology, with high efficiency; Transport medium: D-type horizontal
2. The static seal between the suction section, multistage centrifugal pump is used to
the middle section and the discharge section transport clean water without solid
of the pump adopts metal face seal and "O" particles or liquid with physical and
ring double seal, and the pump shaft seal chemical properties similar to clean
adopts high-performance ramie water
Packing or mechanical seal, safe and reliable; MD type wear-resistant multistage
3. The pump type spectrum is wide, and the centrifugal pump for coal mine is used
large-flow pump is the leading technology in for conveying solid particle content
China: (volume concentration) not more than
4. The rotor adopts two balancing processes, 1.5% (particle size less than 0.5mm),
static and dynamic, and the rotor runout is neutral mine water with temperature
strictly controlled, so that the pump operates not higher than 80 ℃ or other similar
stably and the vibration is small; sewage
5. The shaft is made of high-quality carbon DG type boiler feed water pump is
steel, alloy steel or stainless steel through used for hot water
multiple heat treatment processes, with high
rigidity and good stability; Temperature: 0~125 ℃
6. The unique shoulder positioning structure Capacity: 3.75~1200m/h
makes the impeller positioning more reliable Head: 50~1550m
and safe;
7. The suction section and discharge section
of the pump are made of high-quality castings
or forgings, which ensures the reliability of
product operation while ensuring the hydraulic
efficiency;
8. The balance mechanism is made of
high-quality stainless steel, the surface of
friction pair is quenched or sprayed with
cemented carbide, which has good wear
resistance and long service life;
9. Some models adopt the first-stage
double-suction structure to improve the
anti-cavitation performance.
 APPLICATION AREA
Type D horizontal multistage centrifugal
pump is mainly used for water supply
and drainage in factories, cities and
mines;
MD wear-resistant centrifugal pump for
coal mine is mainly used to transport
neutral mine water and other similar
sewage (only applicable to non-mining
working face when used in coal mine)

DG boiler feed water pump is mainly

used for hot water transporting

MATERIAL

Cast iron Cast steel SS304/L SS316/L

Suction part    
Middle part    
Outlet part    
Guide vane    
Impeller    

Also producing according to the material requirements of customers.

STRUCTURE
PERFORMANCE
Flow: 3.75-1200m ³/ h
Head: 50-1550m
Power: 0.58-1400kw

More details please contact the sales department.

TDSF Split Casing Pumps

MAIN FEATURES TDSF SPLIT CASING Pumps

1 SEALING SYSTEMS
• Stuffing box With efficiencies of up to 91%, TDSF
• Single or double mechanical seal Double-flow impeller axial split case water
• Cartridge seal pump in-line casing for industry help to save
• Split seal for short maintenance times valuable energy. All pumps are fitted with a
• Replacement of seals without double-flow radial impeller which achieves
dismantling the casing very favorable NPSH values. Due to the axial
split case design, maintenance is fast and
2 SPLIT VOLUTE CASING easy. Designed with a double-flow radial
• Sealing of the upper and lower parts impeller and in-line casing, the pump can be
with O-rings ensures short maintenance installed horizontally or vertically (with
times horizontal installation, the motor can be placed
on the left and/or right). These pumps can be
3 DOUBLE SUCTION IMPELLER used in a wide range of industrial processes.
• Efficiency of up to 91% In the water sector, TDSF split case pumps
• Impeller with or without staggered operate in water treatment and water supply
blades (according to specific design) systems as well as in irrigation, flood control,
•For P&P, low pulsation impeller with and desalination. They can also be used as
staggered blades circulation water or cooling water pumps for
power stations, industrial plants and district
4 SHAFT BEARING FOR OIL OR heating networks.
GREASE LUBRICATION
• Compact and robust bearing ensures
ease of installation and long life

5 SECOND SHAFT END

• For flexible choice of drive side
• Provided as standard

6 CONNECTION FLANGE
• According to DIN, ANSI,mating-flange
with polishing on demand

7 PEDESTAL/LEGS
• Flexible and easy pump mounting
• Foundation with motor available on
request
APPLICATION AREA

TLNH series high-efficiency double-suction centrifugal pump is generally used to transport

clean water without solid particles or other liquids with physical and chemical properties similar
to water. It can be widely used in: high-rise water supply, building fire protection, central
air-conditioning water circulation, circulating water supply in engineering systems, cooling
water circulation, boiler water supply, industrial water supply and drainage, water conservancy
irrigation, especially in water plants, paper plants, power plants, thermal power plants, steel
plants, chemical plants, water conservancy projects Irrigation area water supply, etc.
STRUCTURE
MATERIAL

Cast iron Cast steel SS304/L SS316/L

Casing    
Impeller    
Cover    
Machine seal    
Shaft sleeve    

Also producing according to the material requirements of customers.

PERFORMANCE
Flow: 112-17000m ³/ h
Head: 10-155m
Power: 30-1800kw
Inlet dimater:150-1000mm

More details please contact the sales department.

TDZC OH1 Type Pumps

MAIN FEATURES
TDZC chemical pump is single stage 1. TDZC series chemical process pump
single suction bottom corner support adopts innovative development design, and
structure. Accord with API610 OH1 the hydraulic part uses CFD and PIV
standard. advanced software to further optimize the
Mainly used for convey low hydraulic model design, with an average
temperature and high temperature efficiency increase of 3% - 5%. It is a new type
liquid; Convey neutral or corrosive, of high-efficiency energy-saving product.
clean or liquid containing a small
amount of solid particles. It is 2. TDZC series chemical process pump has a
especially used in chemical and wide range of type spectrum and a wide range
petrochemical industries, coal of product performance parameters. Impeller
chemical industry, seawater anti-cavitation design, low NPSH, and reliable
desalination, environmental equipment operation. The suction diameter at
protection engineering, chemical the end is discharged from the shell.
plants, oil refineries, thermal power
plants, metallurgy, sugar making, 3. Full-pull structure design can remove the
pharmaceuticals, paper making and coupling extension section for overall and part
pulp industry, synthetic fiber, water maintenance without disassembling the pump
supply, heat supply, air conditioning body and motor, which is convenient for
and other fields. maintenance and assembly, and has high
reliability.

4. TDZC series pump has a total of 40 models,

nearly 400 specifications and varieties, and
only 6 bearing body parts, with high versatility
and interchangeability design.
MATERIAL

Material of main parts

Part Name
12%Cr SS304 SS304L SS316 SS316L
Body/Cover ZG1Cr13Ni ZG0Cr18Ni9 ZG00Cr18Ni9 ZG0Cr18Ni12Mo2 ZG00Cr18Ni12Mo2
Impeller ZG1Cr13Ni ZG0Cr18Ni9 ZG00Cr18Ni9 ZG0Cr18Ni12Mo2 ZG00Cr18Ni12Mo2
Shaft 45# 3Cr13 3Cr13 3Cr13 3Cr13
Seal Ring 1Cr13MoS ZG0Cr18Ni9 ZG00Cr18Ni9 ZG0Cr18Ni12Mo2 ZG00Cr18Ni12Mo2
Impeller Nut 2Cr13 ZG0Cr18Ni9 ZG00Cr18Ni9 ZG0Cr18Ni12Mo2 ZG00Cr18Ni12Mo2
Shaft Sleeve 2Cr13 ZG0Cr18Ni9 ZG00Cr18Ni9 ZG0Cr18Ni12Mo2 ZG00Cr18Ni12Mo2
Seal Cover 2Cr13 ZG0Cr18Ni9 ZG00Cr18Ni9 ZG0Cr18Ni12Mo2 ZG00Cr18Ni12Mo2
The material will be produced by your requestion if there is any other requirement.

Relationship between material and pump working pressure and temperature

Material Pressure(Mpa) Temperature Test Pressure(Mpa)

304 304L 316 316L 1.6 -40-150℃ 2.7
Cast Steel 2.5 -40-150℃ 3.75
 STRUCTURE

1. Pump body 2. Impeller 3. Pump Cover 4. Seal Cover

5. Radial bearing 6. Bearing assembly 7. Thrust bearing 8. Seal Ring

9. Impeller nut 10. Shaft 11. Shaft sleeve 12.Front bearing cover

13. Support angle 14. Back bearing cover

PERFORMANCE

More details please contact the sales department.

HEBEI TONGDA PUMP CO.,LTD

Address：No. 158, Boming West Road, Boye County, Baoding City, Hebei Province
Tel：+86-0312-8306113
Fax：+86-0312-8306015
Postcode：071000
Website：www.hbtdby.com
Email：bo@hbtdby.com