Service Manual: Viewsonic Vx2245Wm-1

Service Manual
ViewSonic VX2245wm-1
Model No. VS11349 22 Color TFT LCD Display
(VX2245wm-1_SM Rev. 1a Oct. 2006)
ViewSonic 381 Brea Canyon Road, Walnut, California 91789 USA - (800) 888-8583
Copyright Copyright 2006 by ViewSonic Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of ViewSonic Corporation. Disclaimer ViewSonic makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranty of merchantability or fitness for any particular purpose. Further, ViewSonic reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of ViewSonic to notify any person of such revision or changes. Trademarks Optiquest is a registered trademark of ViewSonic Corporation. ViewSonic is a registered trademark of ViewSonic Corporation. All other trademarks used within this document are the property of their respective owners.
Revision History
Revision
1a
SM Editing Date
10/16/2006
ECR Number
Description of Changes
Initial Release
Editor
Jamie Chang
ViewSonic Corporation
Confidential - Do Not Copy
VX2245wm-1
TABLE OF CONTENTS
1. 2. 3. 4. 5. 6. 7. 8. 9.
Precautions and Safety Notices Specification Front Panel Function Control Description Circuit Description Adjustment Procedure Troubleshooting Flow Chart Recommended Spare Parts List Exploded Diagram and Exploded Parts List Block Diagram
1 4 14 24 31 63 71 73 76 77 83
10. Schematic Diagrams 11. PCB Layout Diagrams
ii
VX2245wm-1
1. Precautions and Safety Notices

1. Precautions and Safety Notices
1. Appropriate Operation (1) Turn off the product before cleaning. (2) Use only a dry soft cloth when cleaning the LCD panel surface. (3) Use a soft cloth soaked with mild detergent to clean the display housing. (4) Use only a high quality, safety approved AC/DC power cord. (5) Disconnect the power plug from the AC outlet if the product will not be used for a long period of time. (6) If smoke, abnormal noise, or strange odor is present, immediately switch the LCD display off. (7) Do not touch the LCD panel surface with sharp or hard objects. (8) Do not place heavy objects on the LCD display, video cable, or power cord. (9) Do not use abrasive cleaners, waxes or solvents for your cleaning. (10) Do not operate the product under the following conditions: 2. Caution No modification of any circuit should be attempted. Service work should only be performed after you are thoroughly familiar with all of the following safety checks and servicing guidelines. 3. Safety Check Care should be taken while servicing this LCD display. Because of the high voltage used in the inverter circuit, the voltage is exposed in such areas as the associated transformer circuits. 4. LCD Module Handling Precautions 4.1 Handling Precautions (1) Since front polarizer is easily damaged, pay attention not to scratch it. (2) Be sure to turn off power supply when connecting or disconnecting input connector. (3) Wipe off water drops immediately. Long contact with water may cause discoloration or spots. Extremely hot, cold or humid environment. Areas containing excessive dust and dirt. Near any appliance generating a strong magnetic field. In direct sunlight.
VX2245wm-1
(4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. (5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface. (6) Since CMOS LSI is used in this module, take care of static electricity and ensure human earth when handling. (7) Do not open or modify the Module Assembly. (8) Do not press the reflector sheet at the back of the module in any direction. (9) In the event that a Module must be put back into the packing container slot after it was taken out of the container, do not press the center of the CCFL Reflector edge. Instead, press at the far ends of the CFL Reflector edge softly. Otherwise the TFT Module may be damaged. (10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate or tilt the Interface Connector of the TFT Module. (11) After installation of the TFT Module into an enclosure (LCD monitor housing, for example), do not twist or bend the TFT Module even momentarily. When designing the enclosure, it should be taken into consideration that no bending/twisting forces may be applied to the TFT Module from outside. Otherwise the TFT Module may be damaged. (12) The cold cathode fluorescent lamp in the LCD contains a small amount of mercury. Please follow local ordinances or regulations for disposal. (13) The LCD module contains a small amount of materials having no flammability grade. The LCD module should be supplied with power that complies with the requirements of Limited Power Source (IEC60950 or UL1950), or an exemption should be applied for.
(14) The LCD module is designed so that the CCFL in it is supplied by a Limited Current Circuit (IEC60950 or
UL1950). Do not connect the CCFL to a Hazardous Voltage Circuit
VX2245wm-1
Only touch the metal-frame of the panel or the front cover of the monitor. Do not touch the surface of the polarizer .
Correct methods :
Surface of the panel is pressed by fingers & this may cause MURA
Incorrect Methods :
Take out the monitor with cushion
Take out the monitor by grasping the LCD panel. That may cause MURA.
Place the monitor on a clean & soft foam pad .
Place the monitor on foreign objects . That could scratch the surface of panel
VX2245wm-1
2. Specification
INTRODUCTION
FEATURES TFTLCD PANEL 1st CMO A220Z1 Size Luminance (Typ) Contrast Ratio (Typ) Colors Response Time Viewing Angle (H/V) Recommend resolution Analog (Head) Video Digital (Head) 3.5 mm Audio in (Head) Audio 3.5mm 2 in 1 Audio in (Base) 3.5 Audio out (Base) Audio Headphone out (Base) Separate Sync Composite Sync Sync on Green PC Power Mac TV Box (NextVision 6) AC 100-240V, 50/60Hz On Mode(Typ) LCD Off Mode (Max) On Mode(Typ) Multimedia base On Mode (Max) Upstream port (B type) X 1 Downstream port (A type) X 4 8 in 1 Function VX2245wm 22 " wide 280 cd/ 700:1 16.2 M (6 bits + 2 bits FRC) 5 ms(on/off) 170 / 160 1680x1050@60Hz Yes (75ohms, 0.7/1.0 Vp-p) Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes < 38 W 1 W < 24 W 30 W Yes Yes SD/MMC/MS/MS PRO/CF I & II /MicroDrive/SM Yes
Input Signal
Output Signal Sync Compatibility Compatibility Power Voltage Power Consumption
USB Card reader Speaker
Ergonomics OSD Control Dimension Weight Operating Condition Storage Condition
Regulation
2.1 CH - THD 10% (Max) (Sat.: 2.5w x2 ; subwoofer:3w x1) Tilt ( 20 - -5 ) Yes Swivel No Pivot No Height Adjust No [ 1 ] [ 2 ] [ ][] [] Yes Physical (W x H x D) 524 x 493 x 212 mm Package (W x H x D) 580 x 610 x 260 mm Physical (Net Weight) 6.2Kg / 13.7lbs Package (Gross Weight) 8.5Kg / 18.7 lbs Temperature (/) 41-95/+5-+35 Humidity (%) 20 % - 80 % Temperature (/) -4-131/-20-55 Humidity (%) 20 % - 85 % Global: CB, MPR II,WEEE,ROHS , ISO13406-2 , Energy Star VSA:UL, cUL, FCC-B, TUV-S, NOM, VSE:TUV/ERGO(covers ISO13406-2&MPR II),CE GOST-R+Hygienic ,SASO , ENERGY VSI: BSMI, CCC, PSB, C-TICK, MIC VSCN:CCC
4
VX2245wm-1
ViewDock Multimedia base Spec.

Device prococal USB 2.0/1.1 OHCI (Open Host Controller Interface) EHCI (Enhanced Host Controller Interface) USB 2.0 Speed USB 1.x Speed Mac OS X with USB 2.0 Support Compatible Operating Microsoft Windows XP/Me/2000/98SE with USB 2.0 Support Systems Mac OS 8.6 or above with USB 1.x Support and USB Card Support 1.4.1 Microsoft Windows XP/Me/2000/98SE with USB 1.x Support 1 Upstream USB Type B Receptacle Upstream USB Hub 4 Downstream USB Type A Receptacles Downstream Self-Powered Mode: 500mA /Port USB Supplied Current Idle Mode : 5mA /Port Operating Mode: 100mA/Port Secure Digital (SD) Multi Media Card (MMC) Compact Flash (CF) Type I Compact Flash (CF) Type II Micro Drive Card Reader Smart Media (SM) 4 slots Memory Stick (MS) Memory Stick Pro (MS Pro) USB Standards SMC and SD/MMC CF Type I/II and MS/MS Dual/MS Pro 3.0W (typ) ; 5.0W (Max) 46mm Audio / Speaker >85dB < 10% (Vol. Max) 60dB (Built-in) MIC -38dB +- 3dB Rotation stopper strength: 1.0Kgf.cm VR Volume control Total rotational angle: 220+ 5 2-in-1 Audio-in x 1 (Audio-in / MIC-in) Input Audio I/O Audio-out x1 , Headphone out x1 Output Compatible with iPOD video/iPOD photo/iPOD nano/iPOD Mini/iPOD iPOD connector U2/iPOD Input Voltage Range: 100~240V Input Frequency: 50/60Hz Power adapter External Output Voltage: 12V Full load: 2.0A Peak load: 2.5A 303mm (W) x 212mm (D) Size Up to 127 Devices by Cascading Multiple Hubs Connectivity Yellow-Green Power on iPod connecting Amber Diagnostic LEDs iPod connecting+Po Yellow-green+Amber wer on 24W Power consumption Typical 30W Max. -4F to 140F (-20C to 60C) Storage Temperature 10% to 90% (Non-Condensing) Storage Humidity 32F to 104F (0C to 40C) Operating Temperature 20% to 90% (Non-Condensing) Opreating Humidity Global: CB, WEEE,ROHS VSA:UL, cUL, FCC-B, TUV-S, NOM VSE:CE ,GOST-R+Hygienic ,SASO Certifications VSI:BSMI, CCC, PSB, C-TICK, MIC VSCN:CCC USB A-B Cable ; 2-in-1 Cable ; Power adaptor ; iPod adapter set Accessories Upper Slot Lower Slot Subwoofer Nominal size S/N THD S/N Sensitivity:
5
VX2245wm-1
Package content
(default x 1; 4 in set) Viewdock/Quick start guide/CD(for card reader windows 98 driver)/2-in-1 Aduio cable/USB cable/Power adapter/iPod adapter set
Product definition and specification

Region Product Name Model Number OSD Languages TFT LCD Panel and Model # Scalar Input Signal Sync Compatibility Speaker (2.1ch) VSA (M) VSAP (A)/(P)/(J)/(S)/(K) VSE (E)/(U) VSCN (G)
VX2245wm VS11349 English, French, German, Italian, Spanish, , Finnish, Japanese, Traditional Chinese, Simplified Chinese CMO A220Z1 Realtek, Model # :RTD2553V Dual input (1A + 1D) Separate / Composite / SOG Sat. :2.5W (on LCD Head) Subwoofer : 3W (on Base stand)
Power Consumption Power Cable Power Adaptor for Multimedia base Analog Cable (1.8 m, color : black), with PC 2001 and Hot Plug Detect &DDC DVI Cable(1.8m, color: black) with PC 2001 Audio cable (1.8m) Lime green USB Cable (A-B type) 2- in-1 Audio cable iPod adapter set ViewSonic CD Wizard
LCD: Built-in/ 38 W (typ) ; Base: 24W (typ) Refer to Appendix G Refer to Appendix H YES YES YES YES YES YES Arabic, English, Finnish, Spanish, German, Italian, Japanese, Swedish, Polish, Korean Portuguese, Russian, French, Simplified Chinese, Traditional Chinese, Czech, Hungarian
ViewSonic Quick Start Guide
ViewSonic Card-reader driver CD Screen Protector Mylar Portrait CD(Version xxx) Extrme Label (5ms) Pop Sticker (Front bezel / Base) QSG insert Service Insert Warranty Sticker Warranty Card Carton Sticker PE bag of Carton NO YES YES YES YES NO NO NO NO NO YES YES YES NO NO NO NO NO
YES YES NO YES YES YES NO NO NO NO NO NO YES YES YES NO YES YES YES YES VX2245wm-1
6
4-1 GENERAL specification

Test Resolution & Frequency Test Image Size Contrast and Brightness Controls Contrast = 70%, Brightness = 100% 1680x1050 @ 60Hz Full Size Factory Default:
4-2 VIDEO INTERFACE

Analog Input Connector Digital Input Connector Default Input Connector Video Cable Strain Relief Video Cable Connector DB-15 Pin out Video Signals Video Impedance Maximum PC Video Signal Maximum Mac Video Signal Sync Signals DDC 1/2B Sync Compatibility Video Compatibility DB-15 (Analog), refer the appendix A DVI-D (Digital), refer the appendix B Defaults to the first detected input Equal to twice the weight of the monitor for five minutes Compliant DDC 1/2B 1. Video RGB (Analog) Separate, Composite, and Sync on Green 2. TMDS (Digital) 75 Ohms (Analog), 100 Ohms (Digital) 950 mV with no damage to monitor 1250 mV with no damage to monitor TTL Compliant with Revision 1.3 Separate Sync, Composite Sync, SOG Shall be compatible with all PC type computers, Macintosh computers, and after market video cards 640 x 350*, 640 x 480, 720 x 400* (640 x 400*), 800 x 600, 832 x 624, 1024 x 768, 1152 x 864, 1152 x 870, 1280 x 720, 1280 x 960, 1280 x 1024 , 1400 x 1050 , 1440 x 900 , 1600 x 1200, 1680 x 1050 * The image vertical size might not be full screen. But the image vertical position should be at the center. Not compatible with interlaced video
Resolution Compatibility
Exclusions
POWER SUPPLY (LCD Head)

Internal Power Supply Input Voltage Range Input Frequency Range Short Circuit Protection Over Current Protection Leakage Current Efficiency (at 115VAC Full Load) Fuse Power Output Ripple and Noise Max Input AC Current Inrush Current (Cold Start) Power Supply Cold Start Power Supply Transient Immunity Power Supply Line Surge Immunity Power Supply Missing Cycle Immunity Power Supply Acoustics 27-D009542 90 to 264 VAC 47 to 63 Hertz Output can be shorted without damage 5.0 A typical at 12.0 VDC 3.5mA (Max) at 254VAC / 60Hz Typical: 80% Minimum: 75% Internal and not user replaceable 50 Watts (typ) Ripple: <3% Noise: <1% 1.5 Arms @ 90VAC, 0.75 Arms @180VAC 50 A (max) @ 115VAC 90 A (max) @ 230VAC Shall start and function properly when under full load, with all combinations of input voltage, input frequency, and operating temperature. Shall be able to withstand an ANSI/IEEE C62.41-1980 6000V 200 ampere ring wave transient test with no damage. Shall be able to withstand 1.5 times nominal line voltage for one cycle with no damage. Shall be able to function properly, without reset or visible screen artifacts, when cycle of AC power is randomly missing at nominal input. The power supply shall not produce audible noise that would be detectable by the user. Audible shall defined to be in
Confidential - Do Not Copy 7
VX2245wm-1
Power Saving Operation(Method) Power Consumption Recovery Time
compliance with ISO 7779 (DIN EN27779:1991) Noise measurements of machines acoustics. Power Switch noise shall not be considered. VESA DPMS Signaling Mode LED Power Consumption On Blue 38W (typ) 43W (max) Active off Amber <1W Off Off <1W On Mode = N/A, Active Off < 3 sec
4-4 ELECTRICAL REQUIREMENT Horizontal / Vertical Frequency

Horizontal Frequency Vertical Refresh Rate Maximum Pixel Clock Sync Polarity 24 82 kHz 50 85* Hz 150 MHz Independent of sync polarity.
Timing Table
Analog Composite Separated Item 1 640 x 350 2 640 x 350 3 640 x 400 4 640 x 400 5 6 7 8 9 10 11 12 640 x 400 640 x 480 640 x 480 640 x 480 640 x 480 640 x 480 640 x 480 720 x 400 13 14 720 x 400 720 x 480 Timing SOG Digital - TMDS
Remark
@ 70 Hz, 31.5 KHz
@ 85 Hz, 37.9 KHz
@ 60 Hz, 31.5 KHz
@ 70 Hz, 31.5 KHz
@ 85 Hz, 37.9 KHz @ 50 Hz, 24.7 KHz @ 60 Hz, 31.5 KHz @ @ @ @ 67 72 75 85 Hz, 35 KHz Hz, 37.9 KHz Hz, 37.5 KHz Hz, 43.3 KHz
For Analog sync, the image vertical size image will be not full screen (Still at the center), And the OSD will be 640x350/640x400/720x400 (primary= 720x400). For Analog sync, the image vertical size image will be not full screen (Still at the center), And the OSD will be 640x350/640x400/720x400 (primary= 720x400). For Analog sync, switch 640x400@60Hz and 640x480@60Hz by [1]+[2] short cut key (primary = 640x480@60Hz) For Analog sync, the image vertical size image will be not full screen (Still at the center), And the OSD will be 640x350/640x400/720x400 (primary= 720x400). For Analog sync, the image vertical size image will be not full screen (Still at the center), And the OSD will be 640x350/640x400/720x400 (primary= 720x400). For Analog sync, switch 640x400@60Hz and 640x480@60Hz by [1]+[2] short cut key (primary = 640x480@60Hz)
@ 70 Hz, 31.5 KHz
@ 85 Hz, 37.9 KHz @ 60 Hz, 31.5 KHz
For Analog sync, the image vertical size image will be not full screen (Still at the center), And the OSD will be 640x350/640x400/720x400 (primary= 720x400). For Analog sync, the image vertical size image will be not full screen (Still at the center), And the OSD will be 640x350/640x400/720x400 (primary = 720x400). For Analog sync, the image vertical size image will
VX2245wm-1
15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52
720 x 576 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1024 x 768 1024 x 768 1024 x 768 1024 x 768 1152 x 864 1152 x 870 1280 x 768 1280 x 768 1280 x 768 1280 x 768 1280 x 768 1280 x 960 1280 x 960 1280 x 960 1280 x 1024 1280 x 1024 1280 x 1024 1280 x 1024 1280 x 1024 1360 x 768 1400 x 1050 1400 x 1050
@ 50 Hz, 31.3 KHz @ @ @ @ @ @ 56 60 72 75 85 75 Hz, Hz, Hz, Hz, Hz, Hz, 35.1 37.9 48.1 46.9 53.7 49.7 KHz KHz KHz KHz KHz KHz
be not full screen (Still at the center),and the information OSD shows 640x480 For Analog sync, the image vertical size image will be not full screen (Still at the center),and the information OSD shows 800x600
@ 50 Hz, 39.6 KHz @ @ @ @ @ @ @ 60 70 75 75 85 75 75 Hz, Hz, Hz, Hz, Hz, Hz, Hz, 48.4 56.5 60 60.2 68.7 67.5 68.7 KHz KHz KHz KHz KHz KHz KHz
For Analog sync, Switch 1024x768@50Hz and 1280x768@50Hz by [1]+[2] short cut key (primary = 1024x768@50Hz)
@ 50 Hz, 39.6 KHz @ 60 Hz, 47.4 KHz @ 60 Hz, 47.8 KHz @ 75 Hz, 60.3 KHz @ 85 Hz, 68.6 KHz @ @ @ @ @ @ @ @ @ @ @ 50 60 75 50 60 70 72 75 60 50 60 Hz, Hz, Hz, Hz, Hz, Hz, Hz, Hz, Hz, Hz, Hz, 49.4 59.7 75.2 52.7 64 74.6 76.8 80 47.7 54.1 64.7 KHz KHz KHz KHz KHz KHz KHz KHz KHz KHz KHz
For Analog sync, Switch 1024x768@50Hz and 1280x768@50Hz by [1]+[2] short cut key (primary = 1024x768@50Hz) For Analog sync, Switch 1024x768@75Hz and 1280x768@75Hz by [1]+[2] short cut key (primary = 1024x768@75Hz) For Analog sync, Switch 1024x768@85Hz and 1280x768@85Hz by [1]+[2] short cut key (primary = 1024x768@85Hz)
1400 x 1050 @ 60 Hz, 65.3 KHz 1400 x 1050 1440 x 900 1440 x 900 1440 x 900 1600 x 1200 @ @ @ @ @ 75 60 60 75 60 Hz, 82.3 KHz Hz, 55.5 KHz Hz, 59.9 KHz Hz, 75 KHz Hz, 75 KHz
For analog sync,, Switch 1400x1050@60Hz and 1680x1050@60Hz by [1]+[2] short cut key (primary = 1680x1050@60Hz)
For analog sync,, Switch 1400x1050@60Hz and 1680x1050@60Hz by [1]+[2] short cut key (primary = 1680x1050@60Hz) *1. Tolerance 2KHz. (if the range dose not cover other timing mode) *2. Any timing not in the list, it should display as normal or show on OUT OF RANGE OSD message with blanking. *3. The image quality of 85Hz mode might be worse than 75Hz. 1680 x 1050 @ 60 Hz, 65.3 KHz
Primary Presets
1680x1050 @ 60Hz
User Presets
Number of User Presets (recognized timings) Available: 10 presets total in FIFO configuration VX2245wm-1
9
Changing Modes
Maximum Mode Change Blank Time for image stability : 5 seconds (Max), excluding Auto Adjust time
Under DOS mode (640 x 350, 720 x 400 & 640 x 400), Auto Adjust
it should recall factory setting when execute
The monitor needs to do Auto Adjust the first time a new mode is detected (see section 0-Touch Function Actions) While running Change Mode, Auto Adjust or Memory Recall, the image shall blank
4-5 FRONT PANEL CONTROLS AND INDICATORS Front Panel Hardware Controls
Power Switch (Front Head) Power LED (Front Head) Front Panel Controls (Head) [ 1 ] [ 2 ] [ ] [] [] Power Control, soft Power Switch. Blue ON Orange Active Off Dark = Soft Power Switch OFF [ 1 ] Button 1 [ 2 ] Button 2 [ ] Power [] Down arrow button [] UP ARROW BUTTON Note: Power Button, Button 1 and Button 2 must be one-shot logic operation. (i.e. there should be no cycling) OSD must fully appear within 0.5s after pushing Button 1
Reaction Time
Short Cuts Function from the button(s)

[1] [2] [] [] +[] [1] + [2] [1] + [] + [] (Keep pushing 3 sec) [1] + [] [1] + [] [] Main Menu Input toggle (Analog or Digital) To immediately activate Brightness/Contrast menu. Recall both of Contrast and Brightness to default Toggle 720x400 and 640x400 mode when input 720x400 or 640x400 mode White Balance. (Not shown on users guide)
Power Lock OSD Lock Essential mode switch Standard ->Text -> Cinema -> Game -> Portrait -> Scenery -> Vivid [2] + [] Skin tone switch Nature -> Reddish -> yellowish [] +[] + [ ] Factory Mode Remark : All the short cuts function are only available while OSD off
Main Menu Controls

Auto Image Adjust*1 Contrast/Brightness*2*4 Input Select Analog, Digital Audio Adjust Volume*4, Mute*4 Color Adjust SRGB, 9300K,7500K, 6500K(default), 5400,User Color [R, G, B] Information [H Frequency, V Frequency, Resolution, Pixel Clock, Serial Number, Model Number, [www.ViewSonic.com ] Manual Image Adjust Horizontal Size*1, H/V. Position*1, Fine Tune*1, Sharpness*3 , Opticolor [Standard, Text , Cinema, Game, Portrait, Scenery, Vivid ], Opticolor Skin Tone[Nature, reddish ,yellowish] Setup Menu
10
VX2245wm-1
Language [English, French, German, Italian, Spanish, Finnish, Japanese, Simplified Chinese, Traditional Chinese], Resolution Notice, OSD Position, OSD Timeout, OSD Background Memory Recall *1 These functions are not available in Digital Mode *2 These functions are not available under SRGB Mode, Opticolor On, and Opticolor Skin Tone On *3 These functions are not available under Native Resolution Mode *4 These functions setting can be recalled to default value by pressing []+[] [Remark] Please refer to the detail in the Appendix C
Function descriptions
OSD Lock short cuts function for the buttons The OSD lock will be activated by pressing the front panel control buttons "(1), & ()" for 10 seconds. If the user then tries to access the OSD by pressing any of the buttons "1", "", "", "2" a message will appear on the screen for 3 seconds showing "OSD Locked". The OSD lock will be deactivated by pressing the front panel control buttons "(1), & ()" again for 10 seconds. Note1: When the OSD is locked will lock all functions, including Volume and Mute Note 2: Status bar indicating OSD Lock or Unlock is in progress and when complete it will indicate OSD Locked Note 3: OSD Lock should not lock Power Button and Power Lock function
4-6 AUDIO INTERFACE (LCD SIDE-SPEAKER SPECIFICATION)

Line input signal Line input impedance Maximum Amp power output (Watt) Amp -THD Speaker Power rating(/Watt) Signal to Noise Ratio Frequency response SPL. FO Line input connection Vibration Screen image Connector PC99 requirement Audio in Cable type / length Audio DPMS 1.0 Vrms @1kHz 10 kOhm 2 W (RL=4) < 10 % THD @1kHz 4/2.5 W (TYP.) ; 4/ 3 W (MAX) 72 dB Fo 20kHz 85 3 dB (at 0.5m) 300 Hz 3.5 mm stereo jacks There should be no audible vibration resonance at volume=100% & treble / bass in def. Value There should be no affect on the screen image stability under any conditions Lime Green pantone # 577C 3.5mm stereo cable / 1.8m length SPEAKERS STAY OFF WHEN THE REST OF THE MONITOR IS IN POWER SAVING
* No any sympathetic or abnormal noise allowed.
11
VX2245wm-1
4-7 TFT LCD PANEL 1st Source Panel

Model number Type Active Size Pixel Arrangement Pixel Pitch Glass Treatment # of Backlights Backlight Life Luminance (5-point) Condition: CT = 6500K, Contrast = Max, Brightness = Max Brightness Uniformity Contrast Ratio Color Depth Viewing Angle (Horizontal) Viewing Angle (Vertical) CMO A220Z1 TN type with RSDS interface 22 wide ; 473.76 (H) x 296.1 (V) RGB Vertical Stripe 0.282(H) x 0.282(H) mm Anti Glare (Hard coating 3H) 4 CCFL ; Top & Bottom edge side 40,000 Hours (Min) 280 cd/m2 (Typ after 30 minute warm up) 200 cd/m2 (Min after 30 minute warm up) 77 % (Typ) / 67 % (Min) 700:1 (typ), 450:1 (min) 16.2 million colors (6 bits + 2 bits FRC) @ CR>10 Typical: 170 Minimum: 150 @ CR>10 Typical: 160 Minimum: 140 Typical = 5ms (Tr =2 ms,Tf =3 ms) Maxmum = 15ms (Tr =7 ms,Tf =8 ms) 3.0 mg per lamp Please see Panel Quality Specifications.
Response Time 10%-90% @ Ta=25C Mercury Panel Defects 4-8 IMAGE PERFORMANCE
*The average of measured value from monthly shipment shall be equal or better than the Typical value above.
Factory Defaults
Item Contrast Brightness Color Temperature Sharpness OSD H. Position OSD V. Position 720x400/640x400 Defaults 70% 100% 6500K 100% 50% 50% 720x400 Item OSD Time Out OSD Background Volume Treble Bass Input Priority Resolution Notice Defaults 15 Sec On 90% N/A N/A Auto Search Enabled
Display Size
Horizontal Display Size, Primary Preset Vertical Display Size, Primary Preset Full Screen Full Screen
Luminance
Lv (Max) Condition: Contrast = 100% Brightness = 100% CCT = User color(R/G/B=100%) Lv (sRGB) Condition: Contrast = Default Brightness = Default CCT = sRGB Lv (6500k) Lv (Max) = The Luminance in section 4-7 TFT LCD PANEL
110 nits Lv (sRGB) 140 nits
Lv (6500K) / Lv (Max) x 100% > 85%

VX2245wm-1
Condition: Contrast = Default Brightness = Default CCT = 6500K Lv (9300k) Condition: Contrast = Default Brightness = Default Color Temperature = 9300K Lv (7500k) Condition: Contrast = Default Brightness = Default Color Temperature = 7500K Lv (5400k) Condition: Contrast = Default Brightness = Default Color Temperature = 5400K Lv (Brightness) Condition: Contrast = 100% Lv (Contrast) Condition: Brightness = 100% Contrast Ratio CR(Max) Condition: Contrast / Brightness = 100% CCT = USER COLOR (R/G/B=100%) CR(6500K) Condition: Contrast / Brightness = Default CCT = 6500K
Lv (9300k) / Lv (Def) x 100% > 70%
Lv (7500k) / Lv (Def) x 100% > 75%
Lv (5400k) / Lv (Def) x 100% > 75%
Lv(Brightness=0%) / Lv(Brightness=100%) x 100% 55% Lv(Contrast =0%) / Lv(Contrast =100%) x 100% 30%
Same as the Contrast Ratio in section 4-6 TFT LCD PANEL CR(6500K) / CR(Max) 85%
* 50% units of shipment shall be equal or better than typical CR spec.
Saturation
Contrast = Default Brightness = Default Test Pattern = 64-Gray Contrast =100% Brightness = 100% Test Pattern = 32-Gray
No visible saturation >1 and <3 level saturation
Preset Color Temperatures

sRGB Preset 1 Preset 2 Preset 3 (Primary) Preset 4 Preset Color Temperature Adjustability It should meet IEC 61966-2-1 (1999-10) standard. CCT (typ) = 9300K x=0.2830.03 y=0.2980.03 CCT (typ) = 7500K x=0.2990.03 y=0.3150.03 CCT (typ) = 6500K x=0.3130.03 y=0.3290.03 CCT (typ) = 5400K x=0.3360.03 y=0.3480.03 Each color preset shall be adjustable. Red, Green, and Blue shall be individually controlled.
* Any gray level and Contrast/Brightness should not get reddish, greenish or bluish.
13
VX2245wm-1
3. Front Panel Function Control Description
Adjusting the Screen Image

Use the buttons on the front control panel to display and adjust the OSD controls which display on the screen. The OSD controls are explained at the top of the next page and are defined in Main Menu Controls on page 10.
Main Menu with OSD controls
Front Control Panel shown below in detail
Displays the control screen for the highlighted control. Also toggles between two controls on some screens. Also a shortcut to Auto Image Adjust.
Standby Power On/Off Power light Blue = ON Orange = Power Saving
Displays the Main Menu or exits the control screen and saves adjustments.
Scrolls through menu options and adjusts the displayed control. Also a shortcut to display the Contrast adjustment control screen ( ) / OptiColor ( )
14
VX2245wm-1
Do the following to adjust the display setting: 1. To display the Main Menu, press button [1].
NOTE: All OSD menus and adjustment screens disappear automatically after about 15 seconds. This is adjustable through the OSD timeout setting in the setup menu. 2. To select a control to adjust, press or to scroll up or down in the Main Menu. 3. After the desired control is selected, press button [2]. A control screen like the one shown below appears.
The command line at the bottom of the control screen tells what to do next from this screen. You can toggle between control screens, adjust the selected option, or exit the screen.
4. To adjust the setting, press the up
or down
buttons.
5. To save the adjustments and exit the menu, press button [1] twice. The following tips may help you optimize your display: Adjust the computer's graphics card so that it outputs a 1680 x 1050 @ 60Hz video signal to the LCD display. (Look for instructions on changing the refresh rate in the graphics card's user guide.) If necessary, make small adjustments using H. POSITION and V. POSITION until the screen image is completely visible. (The black border around the edge of the screen should barely touch the illuminated active area of the LCD display.)
15
VX2245wm-1
Main Menu Controls

Adjust the menu items shown below by using the up
Control Explanation
and down
buttons.
Auto Image Adjust sizes and centers the screen image automatically. Contrast adjusts the difference between the image background (black level) and the foreground (white level). Brightness adjusts background black level of the screen image. Input Select toggles between inputs if you have more than one computer connected to the VX2245wm.
Audio Adjust Volume increases the volume, decreases the volume, and mutes the audio. Mute temporarily silences audio output. Color Adjust provides several color adjustment modes, including preset color temperatures and a User Color mode which allows independent adjustment of red (R), green (G), and blue (B). The factory setting for this product is 6500K (6500 Kelvin).
sRGB-This is quickly becoming the industry standard for color management, with support being included in many of the latest applications. Enabling this setting allows the LCD display to more accurately display colors the way they were originally intended. Enabling the sRGB setting will cause the Contrast and Brightness adjustments to be disabled.
16
VX2245wm-1
Control
Explanation
9300K-Adds blue to the screen image for cooler white (used in most office settings with fluorescent lighting). 7500K - Adds blue to the screen image for cooler white (used in most office settings with fluorescent lighting). 6500K-Adds red to the screen image for warmer white and richer red. 5400K-Adds green to the screen image for a darker color. User Color Individual adjustments for red (R), green (G), and blue (B). 1. To select color (R, G or B) press button [2]. 2. To adjust selected color, press and . Important: If you select RECALL from the Main Menu when the product is set to a Preset Timing Mode, colors return to the 6500K factory preset. Information displays the timing mode (video signal input) coming from the graphics card in the computer, the LCD model number, the serial number, and the ViewSonic website URL. See your graphics cards user guide for instructions on changing the resolution and refresh rate (vertical frequency). NOTE: VESA 1680 x 1050 @ 60Hz (recommended) means that the resolution is 1680 x 1050 and the refresh rate is 60 Hertz.
Manual Image Adjust
17
VX2245wm-1
Control
Explanation
Horizontal Size adjusts the width of the screen image. H./V. Position (Horizontal/Vertical Position) moves the screen image left or right and up or down.
Fine Tune sharpens the focus by aligning text and/or graphics with pixel boundaries. NOTE: Try Auto Image Adjust first. Sharpness adjusts the clarity and focus of the screen image. OptiColor Mode provides an optimum display environment depending on the contents displayed. It contains 7 user-selectable presets. These 7 presets are easily accessible from the short cut keys. Standard is for general windows environment and monitor default setting. Text optimized for text editing and viewing in a word processing environment. Cinema optimized for movie and video environment. Game optimized for PC/TV game environment. Portrait optimized for displaying indoor portraits and enhancing pictures. Scenery optimized for displaying outdoor scenery images. Vivid optimized for color luster and sharpness. These 7 presets are carefully chosen by Viewsonic, but may not suit all users' tastes. In that case, the user can either return to the Standard setting and manually adjust the brightness and contrast as desired. OptiColor Skin Tone includes 3 presets (Natural / Red Tone / Yellow Tone) which user can select according to user's preference.
18
VX2245wm-1
Control
Explanation
Setup Menu displays the menu shown below:
Language Select allows the user to choose the language used in the menus and control screens. Resolution Notice allows the user to enable or disable this notice.
If you enable the Resolution Notice shown above and your computer is set at a resolution other than 1680 x 1050, the following screen appears.
OSD Position allows the user to move the OSD menus and control screens. OSD Timeout sets the length of time the OSD screen is displayed. For example, with a 30 second setting, if a control is not pushed within 30 seconds, the display screen disappears. OSD Background allows the user to turn the OSD background On or Off. Memory Recall returns the adjustments back to factory settings if the display is operating in a factory Preset Timing Mode listed in the Specifications of this manual.
19
VX2245wm-1
Physical Description
Please refer to the following illustrations to identify the components of the ViewDock.
Front View
Rear view
20
VX2245wm-1
Card Reader Installation Refer to the following information

After connecting the ViewDock to your PC, Windows File Manager will show 4 extra icons. Step1. Please check your card socket
Step2. Insert your memory card. Each slot of the card reader will be recognized as a Removable Disk and the icon will be shown in "My Computer" of Windows
You do not need to install any special drivers for the Card Reader if your OS is Windows 2000/ ME/XP. Card reader Installation guide for Windows 98SE : (Please do not connect the ViewDock to your PC's USB port before running the CD): 1. 2. 3. 4. Insert the driver CD into the CD-ROM Please launch the .exe file and the driver will be installed automatically. After completing installation, connect the ViewDock to your PC's USB port. The card reader is now operational. Each slot of the card reader will be recognized as a Removable Disk and the icon will be shown in "My Computer."
21
VX2245wm-1
USB Hub Installation Refer to the following information Downstream port Connect to device Type A female
Connect any USB devices via the USB ports on the ViewDock. Windows will auto detect and install the generic Windows USB driver for USB 1.1/2.0 device operation. You do not need to install any special drivers for the USB Hub if your OS is Windows 2000/ ME/XP. USB hub installation guide for Windows 98SE : Insert the included CD into the CD-ROM drive. The Autorun feature will automatically begin the installation process. Follow the instructions on the screen to install the driver. If the setup program does not start automatically, go to "My Computer" and double-click on the CD-ROM drive, and select "Setup.exe" from the CD. Note: If USB device is not detected , does not work properly: 1. 2. 3. 4. 5. Double click the "System" icon in Control Panel. Select the "Device Manager" tab from System Properties dialog window. Select "Other devices" to see the contents. Select "Unknown device" and click "Remove" button. Click the "Refresh" button and system will find a new device.
ViewDockTM Connecting with iPod Refer to the following information 1. Make sure the ViewDock power is ON. 2. Dock your iPod into the universal iPod docking station with the appropriate adapter insert. 3. The iPod LED indicator will turn on amber 4. Wait for a few seconds for the iTunes software to launch. 5. Play your favorite song with iTunes software (for all iPod models) or play music from iPod directly (excluding iPod shuffle.)
22
VX2245wm-1
iPod adapter insert description: iPod with video adaptor is a default setting for multimedia base.
Subwoofer Volume Control Refer to the following information 1. 2. 3. 4. Adjust subwoofer volume via volume control " " " Turn right to increases the subwoofer volume. " Turn left to decreases the subwoofer volume.
In order to obtain the optimum listening environment, please adjust the volume of stereo speakers in the monitor head via the monitor OSD menu to match and balance the subwoofer volume.
23
VX2245wm-1
4. Circuit Description
1.RTD 2553V
Realtek RTD2553V series products are all-in-one LCD monitor controllers supporting UXGA / WSXGA+ / WXGA+ / SXGA (optional), and integrate Realtek high performance ADC, TMDS Rx(optional),scaling engine, OSD engine, LVDS Tx, Tx and so on. Moreover, all products are pin compatible in QFP128-pin package to save cost and make the design easier. RSDS
2. RTD2120
This chip is the micro-processor of LCD monitor. It uses the design ware DW8051 of Synopsys as the 8051 core of this chip and is compatible with other industry 8051 series. Also, 96Kbyte FLASH with 8 bit bus is embedded in this chip which is licensed from TSMC 0.18um e-FLASH process. Here we use the package of PLCC44/LQFP48 if we would like to have a discrete MCU controller or we make a multi-chip package with our LCD monitor controller to form one chip package to save the cost of package and PCB material.
24
VX2245wm-1
Analog EDID
Time: 13:26:13 Date: Thu Jun 08, 2006 ______________________________________________________________________ ______________________________________________________________________ VIEWSONIC CORPORATION EDID Version # 1, Revision # 3 DDCTest For: ViewSonic VX2245wm ______________________________________________________________________ ______________________________________________________________________ EDID Block 0, Bytes 0-127 128 BYTES OF EDID CODE: 0 0 | 00 10 | 1E 20 | 0E 40 | A9 50 | 71 60 | 27 70 | 00 80 | 30 90 | 00 100 | 00 1 2 3 4 5 6 7 8 9 ________________________________________ FF FF FF FF FF FF 00 5A 63 BB 01 01 01 01 01 10 01 03 00 2F 1E 78 2E F5 85 A4 58 49 40 95 00 90 40 81 80 81 40 4F 01 01 21 39 90 30 62 1A 40 68 B0 36 00 DA 28 11 00 1C 00 00 00 FF 00 51 44 4F 36 30 31 30 30 30 30 31 0A 00 00 FD 00 32 4B 1E 52 0F 0A 20 20 20 20 20 20 00 00
30 | 9A 24 12 50 54 BF EF 80 B3
110 | 00 FC 00 56 58 32 32 34 35 77 120 | 6D 0A 20 20 20 20 00 A9 ______________________________________________________________________ (08-09) ID Manufacturer Name ________________ = VSC (11-10) Product ID Code _____________________ = BB1E (12-15) Last 5 Digits of Serial Number ______ = Not Used (16) (17) (18) (19) (20) Week of Manufacture _________________ = 01 Year of Manufacture _________________ = 2006 EDID Version Number _________________ = 1 EDID Revision Number ________________ = 3 VIDEO INPUT DEFINITION: Analog Signal 0.700, 0.300 (1.000 Vp-p) Separate Syncs, Composite Sync, Sync on Green (21) (22) Maximum Horizontal Image Size ________________ Maximum Vertical Image Size __________________ = 470 mm = 300 mm
(10-17) Complete Serial Number ______________ = See Descriptor Block
25
VX2245wm-1
(23) (24)
Display Gamma ________________________________ Power Management and Supported Feature(s): Active Off/Very Low Power, Standard Default Color Space, Preferred Timing Mode Display Type = R/G/B Color
= 2.20
(25-34) CHROMA INFO: Red X - 0.644 Green X - 0.286 Blue X - 0.143 White X - 0.313 Red Y - 0.347 Green Y - 0.603 Blue Y - 0.070 White Y - 0.329 (35) ESTABLISHED TIMING I: 720 X 400 @ 70Hz (IBM,VGA) 640 X 480 @ 60Hz (IBM,VGA) 640 X 480 @ 67Hz (Apple,Mac II) 640 X 480 @ 72Hz (VESA) 640 X 480 @ 75Hz (VESA) 800 X 600 @ 56Hz (VESA) 800 X 600 @ 60Hz (VESA) (36) ESTABLISHED TIMING II: 800 X 600 @ 72Hz (VESA) 800 X 600 @ 75Hz (VESA) 832 X 624 @ 75Hz (Apple,Mac II) 1024 X 768 @ 60Hz (VESA) 1024 X 768 @ 70Hz (VESA) 1024 X 768 @ 75Hz (VESA) 1280 X 1024 @ 75Hz (VESA) (37) Manufacturer's Reserved Timing: 1152 X 870 @ 75Hz (Apple,Mac II) (38-53) Standard Timing Identification: 1680 X 1050 @60Hz 1600 X 1200 @60Hz 1440 X 900 @60Hz 1400 X 1050 @60Hz 1280 X 1024 @60Hz 1280 X 960 @60Hz 1152 X 864 @75Hz Not Used ______________________________________________________________________ (54-71) Detailed Timing / Descriptor Block 1: 1680x1050 Pixel Clock: 146.25 MHz ______________________________________________________________________ Horizontal Image Size: 474 mm Refreshed Mode: Non-Interlaced Vertical Image Size: 296 mm Normal Display - No Stereo
26
VX2245wm-1
Horizontal: Active Time: 1680 pixels Sync Offset: 104 pixels Border: 0 pixels Vertical: Active Time: 1050 lines Sync Offset: 3 lines Border: 0 lines Blanking Time: 39 lines Sync Pulse Width: 6 lines Frequency: 59.95 Hz Blanking Time: 560 pixels Sync Pulse Width: 176 pixels Frequency: 65.29 KHz
Digital Separate, Horizontal Polarity (-) Vertical Polarity (+)
______________________________________________________________________ (72-89) Detailed Timing / Descriptor Block 2: Monitor Serial Number: QDO060100001 ______________________________________________________________________ (90-107) Detailed Timing / Descriptor Block 3: Monitor Range Limits: Min Vertical Freq - 50 Hz Max Vertical Freq - 75 Hz Min Horiz. Freq - 30 KHz Max Horiz. Freq - 82 KHz Pixel Clock - 150 MHz Secondary GTF - Not Supported ______________________________________________________________________ (108-125) Detailed Timing / Descriptor Block 4: Monitor Name: VX2245wm (126) (127) No Extension EDID Block(s) CheckSum OK
27
VX2245wm-1
Digital EDID
Time: 13:27:26 Date: Thu Jun 08, 2006 ______________________________________________________________________ ______________________________________________________________________ VIEWSONIC CORPORATION EDID Version # 1, Revision # 3 DDCTest For: ViewSonic VX2245wm ______________________________________________________________________ ______________________________________________________________________ EDID Block 0, Bytes 0-127 128 BYTES OF EDID CODE: 0 0 | 00 1 2 3 4 5 6 7 8 9 ________________________________________ FF FF FF FF FF 2F 1E 78 FF 00 5A 63 03 00 40 A4 58 49 10 | 1E 20 | 80 40 | A9 50 | 71 60 | 27 70 | 00 80 | 30 90 | 00 100 | 00 BB 01 01 01 01 01 10 01 2E F5 85
30 | 9A 24 12 50 54 BF EF 80 B3 40 95 00 90 40 81 80 81
4F 31 0A 21 39 90 30 62 1A 40 68 B0 36 00 DA 28 11 00 1C 00 00 00 FF 00 51 44 4F 36 30 31 30 30 30 30 31 0A 00 00 FD 00 32 4B 1E 52 0F 0A 20 20 20 20 20 20 00 00
110 | 00 FC 00 56 58 32 32 34 35 77 120 | 6D 0A 20 20 20 20 00 FE ______________________________________________________________________ (08-09) ID Manufacturer Name ________________ = VSC (11-10) Product ID Code _____________________ = BB1E (12-15) Last 5 Digits of Serial Number ______ = Not Used (16) (17) (18) (19) (20) Week of Manufacture _________________ = 01 Year of Manufacture _________________ = 2006 EDID Version Number _________________ = 1 EDID Revision Number ________________ = 3 VIDEO INPUT DEFINITION: Digital Signal Non - VESA DFP 1.x Compatible (21) (22) Maximum Horizontal Image Size ________________ Maximum Vertical Image Size __________________ = 470 mm = 300 mm
(10-17) Complete Serial Number ______________ = See Descriptor Block
28
VX2245wm-1
(23) (24)
Display Gamma ________________________________ Power Management and Supported Feature(s):
= 2.20
Active Off/Very Low Power, Standard Default Color Space, Preferred Timing Mode Display Type = R/G/B Color (25-34) CHROMA INFO: Red X - 0.644 Green X - 0.286 Blue X - 0.143 White X - 0.313 Red Y - 0.347 Green Y - 0.603 Blue Y - 0.070 White Y - 0.329 (35) ESTABLISHED TIMING I: 720 X 400 @ 70Hz (IBM,VGA) 640 X 480 @ 60Hz (IBM,VGA) 640 X 480 @ 67Hz (Apple,Mac II) 640 X 480 @ 72Hz (VESA) 640 X 480 @ 75Hz (VESA) 800 X 600 @ 56Hz (VESA) 800 X 600 @ 60Hz (VESA) (36) ESTABLISHED TIMING II: 800 X 600 @ 72Hz (VESA) 800 X 600 @ 75Hz (VESA) 832 X 624 @ 75Hz (Apple,Mac II) 1024 X 768 @ 60Hz (VESA) 1024 X 768 @ 70Hz (VESA) 1024 X 768 @ 75Hz (VESA) 1280 X 1024 @ 75Hz (VESA) (37) Manufacturer's Reserved Timing: 1152 X 870 @ 75Hz (Apple,Mac II) (38-53) Standard Timing Identification: 1680 X 1050 @60Hz 1600 X 1200 @60Hz 1440 X 900 @60Hz 1400 X 1050 @60Hz 1280 X 1024 @60Hz 1280 X 960 @60Hz 1152 X 864 @75Hz 640 X 400 @70Hz ______________________________________________________________________ (54-71) Detailed Timing / Descriptor Block 1: 1680x1050 Pixel Clock: 146.25 MHz ______________________________________________________________________ Horizontal Image Size: 474 mm Refreshed Mode: Non-Interlaced Vertical Image Size: 296 mm Normal Display - No Stereo
29
VX2245wm-1
Horizontal: Active Time: 1680 pixels Sync Offset: 104 pixels Border: 0 pixels Vertical: Active Time: 1050 lines Sync Offset: 3 lines Border: 0 lines Blanking Time: 39 lines Sync Pulse Width: 6 lines Frequency: 59.95 Hz Blanking Time: 560 pixels Sync Pulse Width: 176 pixels Frequency: 65.29 KHz
Digital Separate, Horizontal Polarity (-) Vertical Polarity (+)
______________________________________________________________________ (72-89) Detailed Timing / Descriptor Block 2: Monitor Serial Number: QDO060100001
______________________________________________________________________ (90-107) Detailed Timing / Descriptor Block 3: Monitor Range Limits: Min Vertical Freq - 50 Hz Max Vertical Freq - 75 Hz Min Horiz. Freq - 30 KHz Max Horiz. Freq - 82 KHz Pixel Clock - 150 MHz Secondary GTF - Not Supported ______________________________________________________________________ (108-125) Detailed Timing / Descriptor Block 4: Monitor Name: VX2245wm (126) (127) No Extension EDID Block(s) CheckSum OK
30
VX2245wm-1
5. Adjustment Procedure
A. Function Test and Alignment Procedure 1. All Modes Reset You should do All Model Reset (Refer to Chap 3. Hot Keys for Function Controls) first. This action will allow you to erase all end-users settings and restore the factory defaults. 2. Auto Image Adjust The Auto Adjust is aimed to offer a best screen quality by built-in ASIC. For optimum screen quality, the user has to adjust each function manually. A.Turn the computer and LCD monitor on. B. Press the Auto button on monitor keypad to Auto Adjust. C. The LCD monitor will start the Auto Adjust process automatically and run for 10 consecutive seconds, during which time you will notice the image change. 3. Firmware Test Patten: Burn in Model (Refer to Chap3. Hot Keys for Function Control) -Make sure the F/W is the latest version. 4. DCC Test Patten: EDID program -Make sure it can pass test program. 5. Window Shut Down Test Signal: 1280*1024@60Hz Test Pattern:
Checkered Pattern Every One Pixel (50%Green & 50%Blue) Inspection Item: Flicker, Mura 6. Window BG Test Signal: 1280*1024@60Hz Test Pattern:
Window standard pattern Inspection Item: Line Defect, Function Defect & Mura
31
VX2245wm-1
7. 25 Gray Test Signal: 1280*1024@60Hz Test Pattern:
Full Screen 25% White (Gray) Inspection Item: Particle, Line Defect & Mura 8. 50 Gray Test Signal: 1280*1024@60Hz Test Pattern:
Full Screen 50% White (Gray) Inspection Item: Bright Dot, Particle, Line Defect & Mura 9. White Box Test Signal: 1280*1024@60Hz Test Pattern:
Window standard pattern Inspection Item: Particle, Line Defect, Power, Image Remain & Mura 10. Black Box Test Signal: 1280*1024@60Hz Test Pattern:
Window standard pattern Inspection Item: Bright Dot, Line Defect & Power 11. RED Test Signal: 1280*1024@60Hz Test Pattern:
32
VX2245wm-1
Full Screen Red Inspection Item: Bright Dot, Partial & Line Defect 12. Green Test Signal: 1280*1024@60Hz Test Pattern:
Full Screen Green Inspection Item: Bright Dot, Partial & Line Defect 13. Blue Test Signal: 1280*1024@60Hz Test Pattern:
Full Screen Green Inspection Item: Bright Dot, Partial & Line Defect 14. Gray_Scale_0-100_V64 Test Signal: 1280*1024@60Hz Test Pattern:
Vertical 64 (256) Gray Scale (Right LeftFrom 0 to 100% White) Inspection Item: Line Defect & Function Defect 15. Function Test Display pattern Item 1 2 3 4 5 6 7 8 Pattern Gray_Scale_0-100_V Gray_Scale_0-100_H Black Red Green Blue White Black_Tile Description Vertical 64 (256) Gray Scale (From 0 to 100% White) Horizontal 64 (256) Gray Scale (From 0 to 100% White) Full Screen Black Full Screen 50% Red Full Screen 50% Green Full Screen 50% Blue Full Screen White Black Tile Under White Background Remark Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 Figure6 Figure7 Figure 8
33
VX2245wm-1
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
Figure 8
34
VX2245wm-1
BIOS update procedure

1. To setup ISP environment
Hardware: PC or Notebook , Parallel(Printer) cable , ISP tool( Fig 1) Software: ISP driver . If the O.S. was Win2000 or Win XP please have to install
Fig1
PORT95NT.exe
In order to ensure can execute ISP program, please set BIOS in PC or Notebook as Fig 2
Fig 2
35
VX2245wm-1
2. Install ISP
2.1 User could download ISP driver and PORT95NT install file from Myson Century website( //www.myson.com.tw ) 2.2 After extracting the zip file, the total files list as Fig 2.2, and double click the file of setup.exe to install.
Fig 2.2 2.3 Press Next button to continue., see Fig 2.3
Fig 2.3
36
VX2245wm-1
2.4 Keep default setting or press Change button for selecting the path that you want , and then pressNextbutton to continue, see Fig 2.4.
Fig 2.4 2.5 Press Install button to continue, see Fig 2.5
Fig 2.5
37
VX2245wm-1
2.6 The Installer Information shows package warning, press Ignore button to continue, see Fig 2.6.
Fig 2.6 2.7 Installation has finished, press Finish button, see Fig 2.7.
Fig 2.7
38
VX2245wm-1
3. ISP security code

3.1 After installation, we could find the shortcut in the setting path or the program bar (default setting), see Fig 3.1.
Fig 3.1 2.2 Security file is a key to use ISP function, press button, see Fig 3.2.
Fig 3.2
39
VX2245wm-1
3.3 The warning is used to remind user of that different CPU rate may cause ISP function fail(it is limited by IIC protocol), press button, see Fig 3.3.
Fig 3.3 2.4 PressCreate Security File button to key in security code. Adjusting bar to decrease speed of IIC bus, see Fig 3.4.
Fig 3.4
40
VX2245wm-1
3.5 At least 2 Command No of security code, see Fig 3.5, and different security code between hardware ISP and software ISP. The security code of software ISP is set by user while coding, but the security code of hardware ISP is set by Myson Century.
Fig 3.5
41
VX2245wm-1
3.6
Fig 3.6 shows the setting for security code of hardware ISP, it needs 4 Command No, and key in command sequentially for 94, 94, AC, CA, 53.
Fig 3.6
42
VX2245wm-1
3.7
Fig 3.7 shows the setting for security code of software ISP, it needs 2 Command No, and key in command sequentially
for 7C, 4C, 77. The Command No and command must be set by user while coding. About the detail of setting, please refer to Section 6 Boot code of ISP.
Fig 3.7
43
VX2245wm-1
4. Use ISP to program MCU

4.1 Select MTV type first, load the binary or Intel hex file that you want to program into the MCU, and select Auto item, then press RUN button, see Fig 4.1. 4.2 If user changes the MTV type, it must load file again, or the buffer of load file will be cleared. 4.3 CRC (cyclic redundancy check): the host can check CRC registers result instead of reading every byte in flash. The message of Check MCU CRC OK means that the Host verify ok for the progress of program.
Fig 4.1
44
VX2245wm-1
5 Use ISP to read MCU content

5.1 Only software ISP could read the MCU content, it is according to program the boot code while coding. The limitation is used for the security of customers code. Select Read Target item, and pressRUN button, the MCU content will show as Fig 5.1.
Fig 5.1
45
VX2245wm-1
5.2 If user uses hardware ISP to read MCU content, it shows as Fig 5.2.
Fig 5.2
46
VX2245wm-1
6 Re-entry the ISP Mode

When you could not select or click Reset MCU button and enter ISP mode again, you refer the message as below:
47
VX2245wm-1
Note: (1)Disable the Enter ISP Mode option to avoid the error message display. (2)If you using the MTV312M64 or before MCU serials, the MCU will always in ISP Modeeven programming fail or erase MCU that instead of select or press Reset MCU.
48
VX2245wm-1
7. Boot code of ISP

7.1 Hardware ISP (1) Without boot code (2) Fixed security code: 94, 94, AC, CA, 53 (3) Attention to the pin of HSCL (1) and HSDA (1) should keep in enable (4) MTV412M, MTV512M, CS8954 support hardware ISP 7.2 Software ISP (1) With boot code (2) User define the security code (3) Attention to the pin of HSCL (1) and HSDA (1) should keep in enable (4) Only software ISP could read the MCU content (5) MTV212M, MTV312M, MTV230M, MTV412M, MTV512M, CS8954 support software ISP 7.3 Boot code of software ISP (1) Initialize MCU (a) Define the I/O pin to HSCL (1) and HSDA (1) (b) Define the slave B address (c) Enable 8051 INT1 (ISR 2) (2) Coding for INT1 while get into ISP mode (a) Clear watchdog to prevent reset during ISP period (b) Disable all interrupt to prevent CPU wake-up (c) Write ISP slave address (d) Write 93h to ISP enable address to enable ISP (e) Enter 8051 idle mode
49
VX2245wm-1
7.4 The followings show the relationship between the code and the security code.
50
VX2245wm-1
8. ISP Adaptor Schematic
9. Adaptor Linking
ISP Adaptor The Monitor Set Connect with Printer Cable 25Pins to 25Pins PC/HOST
Connect with VGA Cable 15Pins to 15Pins
51
VX2245wm-1
Packing For Shipping And Disassembly Procedure

Packing For Shipping 1. Packing Procedure
1.1 Paste protection film to protect the monitor. (Figure 1) 1.2 Put the monitor in the PE bag and seal the bag with tape. (Figure 2)
Figure 1
Figure 2
1.3 Put the cushion into the carton then place the monitor on the cushion. (Figure 3) 1.4 Join the cushions to the monitor then place all the accessories into the carton. As last, close the carton and seal it with tape. (Figure 4)
Figure 3
Figure 4
52
VX2245wm-1
Monitor Assembly and Disassembly

1 Separate Stand Assy 1 Remove Stand Cover
Step 1 : Remove the Stand Covers.
Step 2 : Loose and remove 6 screws
Step4 : Remove the Stand Assy
Step 5 : Completed.
53
VX2245wm-1
2 Separate Rear Cover (Rear Case Assy) Separate Bezel hooks to take Bezel and Rear Cover apart.
Step 1 : Loose and remove 3 screws.
Step 2 : Separate Bezel hooks to take Bezel and Rear Cover apart.
Step 3 : Remove Rear Cover.
Step 4 : Completed.
54
VX2245wm-1
3 Remove Power Board and AD Board 3.1 Remove Metal Cover
Step 1 : Remove FFC from OSD Board.
Step 2 : Lift up LCD module and remove bezel.
Step 3 : Remove 4 pieces of Backlight wires.
55
VX2245wm-1
Step 7 : Remove the PCBA Cover
3.2 Remove Power Board and AD Board
Step 2 : Remove Lips Board
56
VX2245wm-1
Step 3 : Remove 2 pieces of FFCs.
Step 4 : Remove the FFC.
Step 6 : Remove AD PCBA.
Step7 : Completed.
57
VX2245wm-1
4 Change New AD Board and Power Board
Step 1 : Place new AD Board. And fasten 4 fixed screws.
Step 2 : Fasten 4 fixed screws.
Step 3 : Insert FFC.
Step 4 : Insert 2 pieces of FFCs .
Step 5 : Insert new Lips Board.
58
VX2245wm-1
Step 7 :Completed. 5. Remove OSD Board
Step 1 : Separate both Audio Cable.
Step 2 : Take OSD Board apart.
Step 3: Completed.
59
VX2245wm-1
6.Change New OSD Board
Step 1 : Place New OSD Board.
Step 2 : Insert Audio cable to connectors of New OSD Board.
Step 3: Completed. 7. Add Cover to AD PCB Heatsink
Step 1 : Join the PCB Cover.
60
VX2245wm-1
Step 3 : Fasten 2 fixed screws
Step 5 : Insert 4 pieces of Backlight wires.
Step 6 : Join LCD module and remove bezel.
Step 7 : Insert FFC.
Step 8 : Completed. ViewSonic Corporation

61
VX2245wm-1
8. Rear Assy & Stand Assembly
Step 1 : Place Rear Cover.
Step 3 : Place the Stand Assy.
Step 5 : Join the Stand Covers.
Step 6 : Completed.
62
VX2245wm-1
6. Troubleshooting Flow Chart Defect Mode

Light On Test
Failure Analysis
Repair
Testing
Panel Change Should be Performed to Level 3 Repair stage

Flash Dots Bright Dot Dark Dot Backlight
Light Leakage
Abnormal Display
Mura
Image Sticking Brightness spot
Check Panel
Panel Change
Particle Dot Defect

Image Remain Group Bright Dots
Others Cosmetics Defect
Next Step
NG
TEST
Completed
63
VX2245wm-1
Defect Mode
Failure Analysis
Repair
Testing
A
Display Noise
Power on Display Abnormal
Check PCBA
AD/B Change Power/B Change

Inverter/B Change
Flicker Beat Display Flicker Check Panel Beat Display Shut Down
CNT/B Change
Panel Change
AD/B Change Display Wave Check PCBA Power/B Change CNT/B Change Check Panel No Backlight Panel Change
Check Adapter
Adapter Change
Next Step
NG
TEST
Completed
64
VX2245wm-1
Failure Analysis
Repair
Testing
B
Display White Out Booting Delay Brightness Even Abnormal Beat Display No Backlight Check Panel Check Adapter No signal AD/B Change R.G.B Display Abnormal Check Wire Gray Scale Display Abnormal Check Panel VGA cable Change DVI cable Change Panel Change Check PCBA CNT/B Change Check PCBA Check PCBA AD/B Change Power/B Change Check PCBA
Inverter/B Change
OSD/B Change Power/B Change

Inverter/B Change
Panel Change Adapter Change
Next Step
NG
TEST
C
Completed
65
VX2245wm-1
Defect Mode
Failure Analysis
Repair
Testing
C
Horizontal Line Defect Vertical Weak Line Horizontal Weak Line Vertical Band Defect Horizontal Band Defect Power Saving Display Abnormal AD/B Change Peculiar Smell Check PCBA Power/B Change
Inverter/B Change
Check PCBA
AD/B Change
Check Panel
Panel Change
Check PCBA
AD/B Change
Next Step
NG
TEST
Completed
66
VX2245wm-1
Defect Mode
Failure Analysis
Repair
Testing

AD/B Change Power/B Change Power ON/OFF Abnormal No Power Turn Off Abnormal Check Wire Check Wire Check PCBA Check PCBA CNT/B Change Inverter/B Change OSD/B Change OSD Cable AC Power Change DC Power CNT Cable Change Check Adapter Adapter Change
AD/B Change LED Display Abnormal LED Off LED Dark Check PCBA Power/B Change Inverter/B Change OSD/B Change LED Abnormal LED Loss LED Flicker Adapter Change Check Wire DC Power CNT Cable Change OSD Cable Change
Next Step
NG
TEST
Completed
67
VX2245wm-1
Defect Mode
Failure Analysis
Repair
Testing

Abnormal BIOS &OSD OSD Key Unavailable CNT/B Change OSD Cant Input OSD Cant Read OSD No Display Check Wire OSD Jiggle OSD Display Abnormal Check BIOS Check PCB Power/B Change Inverter/B Change OSD/B Change D-sub cable Change OSD cable Change VGA cable Change DVI cable Change BIOS Update AD/B Change
Abnormal Loudspeaker
Voice Loss
AD/B Change CNT/B Change
Abnormal Loud L/R Abnormal Check Wire No Voice L/R Same Volume Loudspeaker Noise Check Loudspeaker Check PCBA
Power/B Change Inverter/B Change OSD/B Change OSD Cable Change Loudspeaker Change
Next Step
NG
TEST
Completed
68
VX2245wm-1
Defect Mode
Failure Analysis
Repair
Testing
Other Abnormal Display
Display Shut Down
Check PCBA
AD/B Change Power/B Change CNT/B Change
Check Panel
Display Flicker (tapping )
Panel Change AD/B Change CNT/B Change
Check PCBA
Check Panel
Panel Change
DVI Signal Display Abnormal
Check PCB
AD/B Change EDID Update
Check EDID Code
Next Step
NG
TEST
Completed
69
VX2245wm-1
Trouble Shooting Analysis

Check the information in this section to see if the problems can be solved before requesting repair. NoteThe consumers are only allowed to solve the problems described as below. Any unauthorized product modification, or failure to follow instructions supplied with the product will end the warranty immediately. No image Make sure power button is ON. Check whether the LCD monitor and computer power cords are plugged and whether there is a supply of power. No Signal Input Check the signal connection between the computer and LCD monitor. Out of Range Check the computer image output resolution and frequency and compare the value with the preset values (Please refer to [Appendix-Display Mode]). Fuzzy Image Adjust Phase. Image too bright Adjust brightness and contrast by OSD. Image too dark Adjust brightness and contrast by OSD. Irregular image Check the signal connection between the computer and LCD monitor. Perform Auto Adjust. Distorted image Reset the LCD monitor Take off extra accessories (such as signal extension cord). Image is not centered Use OSD Image Menu to adjust H_Position and V_Position. Check image size setting. Perform Auto Adjust. Size is not appropriate Use OSD Image Menu to adjust H_Position and V_Position. Check image size setting. Perform Auto Adjust. Uneven color Use OSD Color Menu to adjust color setting. Color too dark Use OSD Color Menu to adjust color setting. Dark area distorted Use OSD Color Menu to adjust color setting. White color is not white Use OSD Color Menu to adjust color setting.
70
VX2245wm-1
7. Recommended Spare Parts List

RECOMMENDED SPARE PARTS LIST (VX2245wm-1)
ViewSonic Model Number:VS11349 Rev: 1a Serial No. Prefix: QD0
Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 19 20 21 22 23 24 25 26 27 28 29 30 31 32 Accessories: PC Board Assembly: Description Power Cord,LP-53 & VCTF 0.75mm^2 3C Power Supply Board (Lips W/ Audio Vo.7) Main Board Rev.04 PCBA Rev.02,ODM Front Panel (Bezel) Back Cover Cover Hinge - Right Cover Hinge - Left Base Assembly - (Stand Seat Assy) DVI Cable, S/L, 1.8M, W/2F Audio Cable (Accessory Black, 28AWG) Accessory Cable,D-Sub, (30AWG) Flat Cable (FFC 36 Pins) Flat Cable (FFC 15 Pins) Safety Label - 149 mmx29 mm Carton Label - 76.2 mmx76.2 mm CD-Rom Screw, 3,P=0.5 mm,L=4 mm,Pan Head Screw, 3,P=0.5 mm,L=4 mm,Pan Head Screw,M3*P0.5*6,Steel Screw, M4, P=0.7 mm, L=8 mm Round Head Screw, 4,P=0 mm,L=11.8 mm,Hexagon Stand Off,Socket Screw, M3,P=0.5 mm,L=2.5 mm Screw, M3,P=1.27 mm,L=10 mm Tape Security, OPP,L900xW50x0.045mm Decoration Plate PE Bag,600 mmx650 mmx0.13 mm Foam - (Left) Foam - (Right) Craft Box Panel Cover (Panel Protector Film) ECR/ECN ViewSonic P/N A-00005071 B-00008026 B-00008027 B-00008028 C-00008041 C-00008042 C-00008142 C-00008143 C-00008144 CB-00002083 CB-00005678 CB-00005851 CB-00008014 CB-00008015 DC-00008137 DC-00008138 DC-00008139 HW-00000553 HW-00000553 HW-00000555 HW-00004042 HW-00006041 HW-00008002 HW-00008003 M-00000560 M-00008031 P-00008033 P-00008139 P-00008140 P-00008141 PL-00008008 Ref. P/N 32-D002330 27-D009542 35-D010627 35-D010238 40-D010959 40-D010948 40-D012465 40-D012466 40-D013541 32F0000004 32F2818011 32-D002132 32-D008479 32-D011077 77-D013049 77-D013048 76-D013047 42A9930008 42A9930008 42A9930014 42-D000649 42A9940007 42-D009237 42A9930015 7345511002 40-D013544 78-D009624 78-D013535 78-D013545 78-D013534 73-D009538 Universal number#
Cabinets:
Cables:
Documentation:
Hardware:
Miscellaneous: Packing Material:
Plastics:
Remark 1: Above listed items are examples, supplier can expand the rows to add more necessary items. Remark 2: All revised RSPLs with newly added items or any change made should be highlighted and correlated with the ECN/ECR approved by ViewSonic Corporation. This is to eliminate repeated cross checks of each item between this version and prior versions.
71
VX2245wm-1
BOM LIST (VX2245wm-1)

ViewSonic Model Number: VS11349 Rev: 1a Serial No. Prefix: QD0
Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 ViewSonic P/N N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A HW-00000553 HW-00006041 HW-00004042 N/A N/A N/A CB-00008014 HW-00008002 B-00008026 B-00008027 N/A N/A HW-00000553 HW-00000555 HW-00008003 B-00008028 C-00008041 C-00008042 CB-00008015 C-00008142 C-00008143 C-00008144 PL-00008008 N/A DC-00008137 N/A DC-00000586 M-00000560 N/A P-00008033 DC-00008139 DC-00008138 P-00008140 M-00008031 N/A P-00008139 N/A N/A P-00008141 N/A N/A N/A N/A CB-00002083 CB-00005678 CB-00005851 A-00005071 Description Location ACF, COG, AC-8405Z-23 1.5mmX100M, 100000 mmx1.5 mm, Hitachi Chemical, COG-ACF, Green I Driver IC, COG, Scan, M170E5-L09, HX8653-A000PD400, 240/263/256Channel, Himax, 36-D006411 (HX8633 shrank version), Green II L4M003XXXX 22"wide_TN, Photo Spacer , Corning 0.7mm Glass , Resin/BM(Panel Base) L4M003XXBI 22wide_TN, Photo Spacer , Corning 0.7mm Glass , Resin/BM(Sheet Base) Polarizer, TFT, Degree 135, 478.16 mmx300.2 mmx0.215 mm, XT300CMM220Z1H0B, 74-D007599 M220Z1, LG Chem, LG HCR EWV Polarizer, TFT, Degree 135, 478.16 mmx300.2 mmx0.215 mm, XT300CMM220Z1H0B, 74-D007598 M220Z1, LG Chem, LG HCR EWV Driver IC, COF, Data, M220Z1-L01, HX8019-A07BCBC5, COF, 6 bit, 642Channel, Himax, 36-D007038 Green II 73-D008216 ACF, COF, AC-4255U-16, 200000 mmx1.2 mm, Hitachi Chemical, Green I 73-D002676 ACF, PCB, AC-9825R-35, 100000 mmx1.5 mm, Hitachi Chemical, PCB-ACF, Green 35-D010045 PCBA for , A220Z1-Z01-H, A220Z1-Z01-H-X, 1101-03, Rev.04, USI/ITC, ODM, Green II 7349951002 Silicone, TORAY/-9187L, 330g SCREW, 3, P=0.5 mm, L=4 mm, Pan Head, Phillips Cross Recess, Hama Naka Motogawa Hama 42A9930008 Naka Shoukin Shiho Shin Yee Shye Ching, Green I SCREW, 4, P=0 mm, L=11.8 mm, Hexagon Stand Off, Socket, Shiho Shin Yee Shye Ching Hama 42A9940007 Naka Motogawa, Green I SCREW, M4, P=0.7 mm, L=8 mm, Round Head, Phillips Cross Recess, plate color Zn, 42-D000649 Screw_with_Washer, Shye Ching Hama Naka Motogawa Shin Yee, head D8, Green I 41-D007402 Metal Frame Front, M220Z1-L01, SECC 0.6t, Fomgder/CLT_Metal, Green II 44-D008027 Backlight Unit, A220Z1, Forhouse/ROE, Green II Cover AD Assy, A190A2, SECC, Jiin Ming, Left_Side 4 connector_VESA100*100, Green II 41-D008024 73-C000047 32-D008479 42-D009237 27-D009542 35-D010627 10-D012854 10-D012855 42A9930008 42A9930014 42A9930015 35-D010238 40-D010959 40-D010948 32-D011077 40-D012465 40-D012466 40-D013541 73-D009538 77-D013043 77-D013049 7841795141 7741999141 7345511002 78-D004864 78-D009624 76-D013047 77-D013048 78-D013545 40-D013544 32-D013543 78-D013535 76-D013532 32-D013533 78-D013534 27-D013549 78-D013559 79-D013558 10-D013523 32F0000004 32F2818011 32-D002132 32-D002330 FFC, CFC2128/862P060068D, 36 Pins, Tennsure/Hung Fu, AL foil, Green I SCREW, M3, P=0.5 mm, L=2.5 mm, Pan Head, Phillips Cross Recess, Shye Ching, Green I Lips With Audio, DAC-19M009 AF, 01 A, 5 V/3 A, 13.8 V0.7 A, I TYPE, 7 mA, 1710 V, Delta Dongguan_LIPS, Green II PCBA for , A220Z1-Z01-H, A170E2-E03-H-S6, 1101-02, Rev.04, ITC USI, ODM, RTD2120SLF, Green II Software (EDID_DVI), A220Z1, VSCBB1ED00, VSC, Checksum(EO), VX2245wm, Digital Port, Green II Software (EDID_D-SUB), A220Z1, VSCBBIEA00, VSC, Checksum(8B), VX2245wm, Analog Port, Green II SCREW, 3, P=0.5 mm, L=4 mm, Pan Head, Phillips Cross Recess, Hama Naka Motogawa Hama Naka Shoukin Shiho Shin Yee Shye Ching, Green I SCREW, 3, P=0.5 mm, L=6 mm, Pan Head, Phillips Cross Recess, Hama Naka Shoukin/Shye Ching/Hama Naka Motogawa/Shin Yee, NA, Green I SCREW, M3, P=1.27 mm, L=10 mm, Pan Head, Phillips Cross Recess, Green I PCBA for , A220Z1-Z01-H, A220Z1-Z01-H-K2, 1101-02, Rev.02, ITC USI, ODM, Green II Bezel Assy, A220Z1-H05, Black(J01-J91A11B5), Fuking, SPK, Green II Rear Assy, A220Z1-H05, Silver(TY4818A)/Black(M1077), Fuking, audio_in+DVI-D, Green II FFC, FFC1DDX-A186S1A, 15 Pins, Tennsure_FFC, A220Z1-H05, Green II Cover Hinge, A220Z1-H08, ABS, PA-757, ORIGINAL, Fuking, RIGHT, Green II Cover Hinge, A220Z1-H08, ABS, PA-757, ORIGINAL, Fuking, LEFT, Green II Stand Seat Assy, A220Z1-H08, ABS, Black(J01)/Siliver(877C), ViewSonic Display Limited, VSC P/N C-00006107, Green I Panel Protector Film, A220Z1-H03, XG-536 T=0.1mm, Just Enter, BLANK SN Label for , A220Z1-H08, 50 mmx25 mm, Kunshan Hwakuan Chang Huang, VSC_VX2245wm, Green II Safety Label for , A220Z1-H08, 149 mmx29 mm, Kunshan Hwakuan Chang Huang, VSC_VX2245wm, Green II Corner Protector, paper, 50 mmx50 mmx900 mm, Green I Module Label, A190E2-H03, 75 mm, 40 mm, Non Green Tape, A170E1-H0P, 900 mmx50 mmx0 mm, Symbio, OPP Corner Protector, Paper, M190A1, 50 mmx50 mmx1780 mm, Jonin/NingBo MingChan_EPST:3mm, Green II Bag, 600 mmx650 mmx0.13 mm, PE Foam, 650, Huang Jyii, Green II MENU for A220Z1-H08, Complex, 4C, Car Tong Kunshan Yi Ching, VSC_VX2245wm CDROM, Green II Carton Label for , A220Z1-H08, 76.2 mmx76.2 mm, Chang Huang Kunshan Hwakuan, VSC_VX2245wm, Green II Cushion, A220Z1-H08, EPS, WHITE, 260 mmx195 mmx590 mm, Li Ta NingBo MingChan_EPS, EPS foam(Right), Green II Decoration Assy, A220Z1-H08, ABS, Siliver(877C), ViewSonic Display Limited, VSC P/N C00006107, Green I Function Cable, E87647 30V, 1Pins-1Pins, ViewSonic Display Limited, VSC P/N C-00006107, Green I Cushion, A220Z1-H08, EPS, WHITE, 260 mmx195 mmx590 mm, Li Ta NingBo MingChan_EPS, EPS foam(left), Green II MENU for A220Z1-H08, CD-ROM, 4C, ViewSonic Display Limited, VSC P/N:C-0006107, Green II Function Cable, 1Pins-2Pins, ViewSonic Display Limited, VSC P/N C-00006107, Green Carton, A220Z1-H08, 575 mmx255 mmx600 mm, Chen Yi Paper Shanghai Zhung Hao, VSC_VX2245wm, Green II Adapter, 20AWGX2C 105 300V, 2 V, 0.8 A, 40 W, L=1800+/-50mm, BLACK, UL/BSMI, ViewSonic Display Limited, VSC P/N C-00006107, Green I Pallet, A220Z1-H08, Wooden, 1180 mmx1080 mmx143 mm, Ming Li Hua Sun Paper Shanghai Hang Wei, Green II Shipping Package Information for , A220Z1-H08, VSC Software (BIOS), A220Z1, 22Z1LR7000, VSC, Checksum(Bank1:0xFE, Bank2:0xC4), RSDS, RTD2120, Dual+Audio/Analog+Audio, Green II Accessory Cable, DVI, Black, Jceprocable, DVI-D(M) TO DVI-D(M), S/L, W/2F, Green I Accessory Cable, Audio, Black, Jhen Vei, A170E1-H01, 28AWG, Green I Accessory Cable, D-Sub, JV-4777, Black, Pins-Pins, Jhen Vei, 30AWG, Reduce Shield Rate, Green I Power Cord, LP-53 & VCTF 0.75mm^2 3C 6 BLACK & LS-13J, BLACK, BSMI, 1800 mm, Linetek, Green I Ref. P/N Universal number# Q'ty 0.0028 4 1 0.0833 1 1 8 0.0025 0.005 1 0.5 13 4 1 1 1 1 2 3 1 1 1 1 2 6 1 1 1 1 1 1 1 1 1 1 1 0.167 0.042 0.005 0.167 1 1 1 1 1 1 1 1 1 1 1 0.042 1 1 1 1 1 1
72
VX2245wm-1
8. Exploded Diagram and Exploded Parts List
73
VX2245wm-1
EXPLODED PARTS LIST (VX2245wm-1)

ViewSonic Model Number: VS11349 Rev: 1a Serial No. Prefix: QD0
Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 19 20 21 22 ViewSonic P/N C-00008143 C-00008142 N/A N/A N/A N/A CB-00008015 C-00008144 N/A MULTIPLE MATCH N/A N/A N/A N/A HW-00008002 HW-00000553 HW-00004042 HW-00000553 N/A HW-00000555 HW-00008003 Ref. P/N 40-D012466 40-D012465 40-D010955 PM0ZFH0R00 40-D013832 35-D0110238 32-D011077 40-D013541 44-D009236 N/A 27-D008552 35-D009418 41-D005024 32-D009479 42-D009237 42A9930008 42-D000649 42A9930008 42A993008 42A9930014 42A9930015 Description Cover Hinge,A220Z1-H08,LEFT Cover Hinge,A220Z1-H08,RIGHT Rear Assy,A220Z1-H05 22"Wide,Function BOM,D-sub+DVI+Audio Bezel Assy,A220Z1-H05 PCBA_A220Z1-Z01-H-K2 FFC_15pin Stand Seat Assy,A220Z1-H08 Backlight Unit,A220Z1 Maylar Lips Without Audio PCBA for ,A220Z1-Z01-H,A170E2-E03-H-S6 Cover AD Assy FFC,36pin SCREW,M3,P=0.5mm,L=2.5mm,Pan Head SCREW,M3,P=0.5mm,L=4mm,Pan Head SCREW,M4,P=0.7mm,L=8mm,Round Head SCREW,M3,P=0.5mm,L=4mm,Pan Head SCREW,M3,P=0.5mm,L=5mm,Pan Head SCREW,M3,P=0.5mm,L=8mm,Pan Head SCREW,M3,P=1.27mm,L=10mm,Pan Head Q'ty 1 1 1 1 1 1 1 1 1 1 1 1 1 2 3 7 1 4 2 6 1
74
VX2245wm-1
PACKING PART LIST (VX2245wm-1 )

ViewSonic Model Number: VS11349 Rev: 1a
Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ViewSonic P/N P-00008033 N/A P-00008139 P-00008140 N/A CB-00005678 CB-00005851 A-00005071 CB-00002083 N/A N/A N/A N/A N/A M-00008031 N/A Ref. P/N 78-D009624 MM0Z140K01 78-D013535 78-D013545 Different region (refer to BOM) 32F2818011 32-D002132 32-D002330 32F0000004 Different region (refer to BOM) Different region (refer to BOM) Different region (refer to BOM) 32-D013533 32-D013543 40-D013544 27-D013549 Location PE Foam Bag LCD Monitior Cushion_LEFT(Left) Cushion_LEFT(Right) Carton Audio Cable Monitor Cable Power Cord DVI-D Cable Menu bag Customer Label Warranty Registration card Audio Cable/Function Cable USB Cable/Function Cable ipod_adapter Power_adapter Q'ty 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
75
VX2245wm-1
9. Block Diagram
OSD Key Pad / Audio Out
Speaker
3.3V
DVI-D Digital Video D-sub Analog Video LDO
5V Main Board 12V Signal LCD Module
DC-5V
DC-12V
AC Power Audio In
LIPS
Backlight
76
VX2245wm-1
MCU1
MUTE DCDC_ON/OFF AUDIO_FUNCTION INV_ON/OFF LED_ORG LED_GRN PWR_SW PANEL_ON/OFF AUTO_ADJ SOURCE_SELECT KEY_UP KEY_DOWN MENU RESET_RTD RTD_SDIO0 RTD_SDIO1 RTD_SDIO2 RTD_SDIO3 RTD_SCSB RTD_SCLK
10. Schematic Diagrams
03_MCU
V5A
MUTE DCDC_ON/OFF
VGA_5V CONNECT
AUDIO_FUNCTION INV_ON/OFF LED_ORG LED_GRN
DDC2_SDA DDC2_SCL BUS_POWER
RESET_MCU
77
DDC_DAT DDC_CLK YOUT RESET_RTD V5A YOUT DDC_DAT DDC_CLK RTD_SCSB RTD_SCLK RESET_MCU CONNECT VGA_5V DDC2_SCL DDC2_SDA BUS_POEWR RTD_SDIO0 RTD_SDIO1 RTD_SDIO2 RTD_SDIO3
B5
PWR_SW PANEL_ON/OFF AUTO_ADJ SOURCE_SELECT KEY_UP KEY_DOWN MENU
MUTE DCDC_ON/OFF AUDIO_FUNCTION INV_ON/OFF LED_ORG LED_GRN PWR_SW PANEL_ON/OFF AUTO_ADJ SOURCE_SELECT KEY_UP KEY_DOWN MENU

YOUT
B4
VX2245wm-1
B3 DDC2_SCL DDC2_SDA BUS_POEWR
DDC_DAT DDC_CLK
RTD_SCSB RTD_SCLK
RTD_SDIO0 RTD_SDIO1 RTD_SDIO2 RTD_SDIO3
RESET_RTD
RESET_MCU
BCKP BCKN FCKP FCKN BB2P BB2N BB1P BB1N BB0P BB0N
02_DVI
BG2P BG2N BG1P BG1N BG0P BG0N V33S RX2P RX2N RX1P RX1N RX0P RX0N RXCP RXCN RX2P RX2N RX1P RX1N RX0P RX0N RXCP RXCN RX2P RX2N RX1P RX1N RX0P RX0N RXCP RXCN BR2P BR2N BR1P BR1N BR0P BR0N FB2P FB2N FB1P FB1N FB0P FB0N
BG2P BG2N BG1P BG1N BG0P BG0N BR2P BR2N BR1P BR1N BR0P BR0N FB2P FB2N FB1P FB1N FB0P FB0N
BG2P BG2N BG1P BG1N BG0P BG0N BR2P BR2N BR1P BR1N BR0P BR0N FB2P FB2N FB1P FB1N FB0P FB0N
05_INTERFACE
04_SCALER
FG2P FG2N FG1P FG1N FG0P FG0N B2
FG2P FG2N FG1P FG1N FG0P FG0N
FG2P FG2N FG1P FG1N FG0P FG0N
DDC_CLK DDC_DAT CONNECT VGA_5V
FR2P FR2N FR1P FR1N FR0P FR0N
01_VGA
VSYNC HSYNC VSYNC HSYNC VSYNC HSYNC V18_ESD GNDB GNDG GNDR SOG BIN GIN RIN V18_ESD V33S GNDB GNDG GNDR SOG BIN GIN RIN GNDB GNDG GNDR SOG BIN GIN RIN V18_ESD V33S
STB POL STV CKV OE VCM_PWM INV_ADJ VOL_ADJ GVOFF GVON FSTHI BSTHI
V5A
V33S
Title Date Rev:
Model
Block diagram
FB1 RAI+
R1
C1
RIN RIN 5
TP1
TP TP TP TP TP TP TP
RIN
1 GNDR 1
SOG
TP2 R2 C2 D1 TP3
11
DDC_DAT HSI VSI DDC_CLK
12 13 14 15
CON1
1 6 2 7 3 8 4 9 5 10
RAI+ RAIGAI+ GAIBAI+
1 GIN 1
GNDG
R3
TP4 C3 GNDR GNDR 5 TP5
BAI-
RAI-
C4 GND_POWER TP6 R5 R4 GND_POWER FB2 GAI+ CA1 SOG SOG 5 TP7
1 BIN 1
GNDB
GND_POWER
R6
C5
GIN GIN 5 R7
CONNECT V1
R8 C6 D2 GND_POWER R9
GAI-
C7
GNDG GNDG 5
GND_POWER C8 4 VGA_5V GND_POWER
FB3 Z1 BAI+
R10
C9
BIN BIN 5
R11 C10 D3
1
GND_POWER
R12
BAI-
C11
GNDB GNDB 5
C12
GND_POWER
R13
V18_ESD
2
Z2
C13
GND_POWER
GND_POWER TP8
TP TP TP TP
HSYNC
VSI
R14 Z3 R15 C14
VSYNC
HSI
R16
L1 Z4 R17 C15
HSYNC
1 VSYNC 1
DDC_CLK
TP9
TP10
GND_POWER GND_POWER GND_POWER
1DDC_DAT
TP11 GND_POWER GND_POWER GND_POWER
DDC_CLK
DDC_CLK
4,5
DDC_DAT
DDC_DAT
4,5
V2
V3
GND_POWER
GND_POWER
Model Title Date
VGA
Rev:
78
VX2245wm-1
DATA0+
RX0P
RX0P
DATA0-
RX0N
RX0N
D4
D5
C16
C17
CON2
R G B RGB GND HSYNC VSYNC SYNC GND DDC SCL DDC SDA +5V HPD 1/3shield 2/4shield 0/5shield clk shield DAT0+ DAT0DAT1+ DAT1DAT2+ DAT2DAT3+ DAT3DAT4+ DAT4DAT5+ DAT5clk+ clk-
25 26 27 29 28 8 15 6 7 14 16 11 3 19 22 18 17 10 9 2 1 13 12 5 4 21 20 23 24
DATA1+
RX1P
RX1P
DATA1-
RX1N
RX1N
1
DDC2_SCL DDC2_SDA C18 DDC2_SCL DDC2_SDA 4 4 C19
D6
D7
DATA0+ DATA0DATA1+ DATA1DATA2+ DATA2-
R18
DATA2+
RX2P
RX2P
DATA2-
RX2N
RX2N
D8
D9
C20
C21
CLK+ CLKCLK+ RXCP RXCP 5 CLKRXCN RXCN 5
GND_POWER
D10
2
D11
BUS_POEWR
C22
C23
Z5
GND_POWER
GND_POWER
5,6
V33S Z6 C24
GND_POWER
Model Title Date
DVI
Rev:
79
VX2245wm-1
DDC_CI_5V DDC_CI_5V D12 2 RP1 3 BUS_POWER BUS_POWER D13 VGA_5V Q1
8 7 6 5
1 2 3 4
U1 3 3 2,5 2,5 DDC2_SDA DDC2_SCL DDC_CLK DDC_DAT DDC_CI_5V
3 6 8 11
1B 2B 3B 4B
1A 2A 3A 4A 1OE 2OE 3OE 4OE
2 5 9 12 1 4 10 13
D14 DDC_CLK_OUT DDC_DAT_OUT DDC_CI_5V 6 V5A V5A
D15
14 7
C25
VCC GND
R21
1
D16 R19 R20
Q2
GND_POWER
GND_POWER
1 2
DDC_CI_SEL
MCU_VCC
GND_POWER
3.1~3.6V
RTD_SDIO0 5
1 2 3 4
RP2
RTD_SDIO1
RTD_SDIO2
R22 6 PANEL_ON/OFF
C26
+ D17 D18
RESET_MCU
8 7 6 5
2 1 2 3 4
RTD_SDIO3
1
R23 6 DCDC_ON/OFF
RP4
1 2 3 4
Q3
RP3
1
R24
IICSCL IICSDA
8 7 6 5
GND_POWER
R25
8 7 6 5
VCC
RST
Q4
RTD_SCSB RTD_SCLK
GND_POWER
P10 P11 P12 P13 P14 P15 P16 P17
R26
RTD_SCSB 5 RTD_SCLK 5 V5A
1 2
43 42 41 40 39 38 37 36
10
44
GND_POWER MCU_VCC 6 INV_ON/OFF 6 AUDIO_FUNCTION 2 CONNECT 6 MUTE 3 DDC2_SCL 3 DDC2_SDA DDC_CI_SEL 5 RESET_RTD
R27 R31
R29
R30
DA0/P5.0 DA1/P5.1 DA2/P5.2 DA3/P5.3 DA4/P5.4 DA5/P5.5 P5.6/HSCL2 P5.7/HSDA2 P3.2/INT0 P3.3/INT1 P3.4/T0 P3.5/T1 P7.6/CLKO2 P7.7
P1.0/ET2 P1.1 P1.2 P1.3 P1.4 P1.5 P1.6 P1.7
2
R32 P67 P66 P65 P64 P63 P62 P61 P60 MENU_ISP MENU 6 YOUT 5 KEY_DOWN 6 KEY_UP 6 SOURCE_SELECT AUTO_ADJ 6 PWR_SW 6 6 R37 GND_POWER VCC RST
5 RP5 6 7 8
4 3 2 1
P50 P51 P52 P53 P54 P55 P56 P57 P32 P33 P34 P35 P76 P77
1
D19
2 3 4 5 6 7 8 9 14 15 16 17 18 19 13 11
RST
VCC
R33
6 6 2,5 2,5
LED_GRN LED_ORG DDC_DAT DDC_CLK R35 R34 DDC_DAT_OUT DDC_CLK_OUT
XTAL2
HSDA1/P3.1/TXD HSCL1/P3.0/RxD
U2
20
21
BUS_POWER GND_POWER R36 R38 MCU_VCC R39 Y1
R40 R41 U3 C28 C29 P10 P11 P12 P13 P14 P15 P16 P17
1
GND_POWER
2 3 4
SEEPROM
A0 A1 A2 GND
VCC TEST SCL SDA
8
C27
7 6 5
IICSCL IICSDA GND_POWER P50 P51 P52 P53 P54 P55 P56 P57 P30 P31
VSS
X2
X1
22
VSS
P31 P30
XTAL1
NC NC NC NC NC NC VSYNC P6.7 P6.6/CLOK1 P6.5 P6.4 P6.3/AD3 P6.2/AD2 P6.1/AD1 P6.0/AD0
1 33 34 35 12 23 32 31 30 29 28 27 26 25 24
RST
VCC
GND_POWER
44 45 46 47 48 1 2 3 5 8 9 10 11 12 13 14
DA0/P5.0 DA1/P5.1 DA2/P5.2 DA3/P5.3 DA4/P5.4 DA5/P5.5 P5.6/HSCL2 P5.7/HSDA2 HSCL1/RXD/P3.0 HSDA1/TXD/P3.1 P3.2/INT0 P3.3/INT1 P3.4/T0 P3.5/T1 P7.6/CLKO2 P7.7
P1.0/ET2 P1.1 P1.2 P1.3 P1.4 P1.5 P1.6 P1.7
40 39 38 37 36 35 34 33
41
NC NC NC NC VSYNC P6.7 P6.6/CLKO1 P6.5 P6.4 P6.3/AD3 P6.2/AD2 P6.1/AD1 P6.0/AD0
32 31 30 29 28 27 26 25 24 23 22 21 20
P67 P66 P65 P64 P63 P62 P61 P60
VSS
P32 P33 P34 P35 P76 P77
NC NC
NC NC 18 19
U4 NC/MTV512/RoHS
15 16
17
6 7
42 43
NC NC
X2 X1
X2 X1
Model Title Date
VSS
MCU
Rev:
80
VX2245wm-1
V33S
Q5 4 YOUT
XI
V33S V18C
1
V33S FBS1
2
C30 C31 C32 C33
1
FB4
V33S
3,6
1
FB5
2
C35 C34 GND_POWER GND_POWER
R42
R43
2.5V
46 117
47 116
U5 GND_POWER XI R45 R46
59 72 83 95 108
60 71 84 96 107
VCCK VCCK
GNDK GNDK
PVCC PVCC PVCC PVCC PVCC
PGND PGND PGND PGND PGND
R28
RESET_RTD
R44
VOL_ADJ
R47 PLL_TEST1 PLL_TEST2 TMDS_TEST
127 128 125 126 1 2 3 4
XO XI DPLL_VDD DPLL_GND APLL_GND APLL_VDD PLL_TEST1 / TCON0 / TCON3 PLL_TEST2 / TCON1 / TCON12
R49 R48
RX2P RX2N RX1P RX1N RX0P RX0N
(PWM0)
V33S
1
FB6
2
C36
TMDS_V33 C37
RXCP RXCN
5 6 7 8 9 10 11 12 13 14 15 16 17 18
TMDS_TST / PWM0 / TCON2 REXT TMDS_VDD RX2P RX2N TMDS_GND RX1P RX1N TMDS_VDD RX0P RX0N TMDS_GND RXCP RXCN
33VRST_REF RESET_OUT TCON9 / PWM0 DDCSCL2 / VCLK / TCON4 DDCSDA2 / V7 / TCON6 SCLK / V6 / TCON3 SCSB / V5 / TCON7 SDIO[3] / V4 / TCON9 SDIO[2] / V3 / TCON5 SDIO[1] / V2 / TCON8 SDIO[0] / V1 / TCON10 V0 / TCON2 TCON13 / COUT 33VPNLOUT AR1N AR1P AR2N AR2P AR3N AR3P AG1N AG1P AG2N AG2P AG3N / TXO0AG3P / TXO0+ ACLKN / TXO1ACLKP / TXO1+ AB1N / TXO2AB1P / TXO2+ AB2N / TXOCAB2P / TXOC+ AB3N / TXO3AB3P / TXO3+ BR1N / TXE0BR1P / TXE0+ BR2N / TXE1BR2P / TXE1+ BR3N / TXE2BR3P / TXE2+ BG1N / TXECBG1P / TXEC+ BG2N / TXE3BG2P / TXE3+
124 123 122 121 120 119 118 115 114 113 112 111 110 109 106 105 104 103 102 101 100 99 98 97 94 93 92 91 90 89 88 87 86 85 82 81 80 79 78 77 76 75 74 73
A_R0N A_R0P A_R1N A_R1P A_R2N A_R2P A_G0N A_G0P A_G1N A_G1P
R74
RESET_MCU
4 GND_POWER
TCON9 TCON4
RTD_SCLK 4 RTD_SCSB 4 RTD_SDIO3 4 RTD_SDIO2 4 RTD_SDIO1 4 RTD_SDIO0 4
GVOFF GVON
6 6
TCON2
BSTHI
A_R0N A_R0P A_R1N A_R1P A_R2N A_R2P A_G0N A_G0P A_G1N A_G1P A_G2N A_G2P A_CKN A_CKP A_B0N A_B0P A_B1N A_B1P A_B2N A_B2P
BB2P BB2N BB1P BB1N BB0P BB0N BG2P BG2N BG1P BG1N BG0P BG0N BCKP BCKN BR2P BR2N BR1P BR1N BR0P BR0N
6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6
AVS AHS GND_POWER B+ BSOG G+ GR+ R2 V18_ESD
19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
1
FB7
2
C39 C38
AVS0 AHS0 ADC_VDD ADC_GND B0+ B0SOG0 G0+ G0R0+ R0B1- / V7 B1+ / V6 G1- / V5 G1+ / V4 SOG1 / V3 R1- / V2 R1+ / V1 ADC_GND ADC_VDD AHS1 / V0 AVS1 / VCLK
A_G2N A_G2P A_CKN A_CKP A_B0N A_B0P A_B1N A_B1P A_B2N A_B2P
DDCSCL1 / TCON4 DDCSDA1 / TCON9
GND_POWER
SDIO[0] / TCON13 SDIO[1] / TCON7 SDIO[2] / TCON11 SDIO[3] / TCON0 SCSB / TCON12 SCLK / TCON3
3 3 3 3 3 3 3 3
RX2P RX2N RX1P RX1N RX0P RX0N RXCP RXCN
PWM1 / TCON0 / COUT PWM2 / TCON1/TCON7 BJT_B BB3P/BBLU7 BB3N/BBLU6 BB2P/BBLU5 BB2N/BBLU4 BB1P/BBLU3 BB1N/BBLU2 BCLKP/BGRN7 BCLKN/BGRN6 BG3P/BGRN5 BG3N/BGRN4
RX2P RX2N RX1P RX1N RX0P RX0N RXCP RXCN
B_R0N B_R0P B_R1N B_R1P B_R2N B_R2P B_G0N B_G0P B_G1N B_G1P
B_R0N B_R0P B_R1N B_R1P B_R2N B_R2P
FB2P FB2N FB1P FB1N FB0P FB0N FG2P FG2N FG1P FG1N FG0P FG0N FCKP FCKN FR2P FR2N FR1P FR1N FR0P FR0N
6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6
2 2
VSYNC HSYNC
AVS AHS
50 51
52 53 54 55 56 57
2 2 2 2 2 2 2
RIN GIN BIN SOG GNDR GNDG GNDB
R+ G+ B+ SOG RGB-
2,4 2,4
DDC_CLK DDC_DAT 6 6 6
R50 R51 FSTHI POL STB STV CKV OE
48 49 58 61 62 63 64 65 66 67 68 69 70
B_G2N B_G2P
B_G0N B_G0P B_G1N B_G1P B_G2N B_G2P B_CKN B_CKP B_B0N B_B0P B_B1N B_B1P B_B2N B_B2P
TCON13 TCON7 TCON11 TCON0 TCON12 TCON3
B_CKN B_CKP B_B0N B_B0P B_B1N B_B1P B_B2N
V33S
6 6 6
R75
R52
R53
INV_ADJ
R54
PWM:230~300Hz(PWM1) PWM:47KHz(PWM2)
B_B2P
VCM_PWM
R55
Q6
1 3 2
V18C Q14
BJT_B
1 3
Model Title Date
SCALER
Rev:
81
VX2245wm-1
TP12
TP
V5A
V12V1
V5A U6 B1 2
TP
V5A1
V33D V33D
1 1
V12A
C40 C44
TP
F1
V5A C41
C42
C43
GND
5.0V
VI(5V)
VO(3.3V) VO(3.3V)
2 4
(PANEL VCC)
C45
C46
B2 1 2
GND_POWER
CN3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 AUDIOL+ AUDIOLAUDIOR+ AUDIORR56
GND_POWER
AUDIO_DISABLE_INPUT MUTE_INPUT VOL_ADJ_INPUT 12V
V5A
AUDIO_FUNCTION
4 R57
INV_ON/OFF_INPUT INV_ADJ_INPUT
V33S
1 R58
3 3
Q7
Q8 1 MUTE 4
Q9 1 INV_ON/OFF 4
R59 TP13 GND_POWER
C47
GND_POWER 1
D20 2 1
B3 2
U7 3 VI(5V) VO(3.3V) VO(3.3V) 2 4
TP
V33S
V33S
GND
V33S
3,5
(SCALER VCC)
C50 C51
C48 V33S
C49
V5A
B4 1 B5 1 B6 1 2 R62 VR V12A Q11 INV_ADJ 5 + C54 C53 C55 2 2 R60 R61 GND_POWER
[INV_GND] C52
Q10
VOL_ADJ
GND_POWER
GND_POWER GND_POWER
GND_POWER
V5A 4 PANEL_ON/OFF 4 DCDC_ON/OFF 5 VCM_PWM 5 GVOFF 5 GVON 5 BSTHI 5 5 5 5 5 5 5 5 BCKN BCKP 5 5 5 5 5 5 5 5 5 5 5 5
PANEL_ON/OFF DCDC_ON/OFF VCM_PWM GVOFF R63 GVON R64 BSTHI BR0N BR0P BR1N BR1P BR2N BR2P BCKN BCKP BG0N BG0P BG1N BG1P BG2N BG2P BB0N BB0P BB1N BB1P BB2N BB2P BG0N BG0P BG1N BG1P BG2N BG2P BB0N BB0P BB1N BB1P BB2N BB2P BR0N BR0P BR1N BR1P BR2N BR2P
4 MENU 4 KEY_DOWN 4 KEY_UP 4 SOURCE_SELECT 4 AUTO_ADJ PWR_SW LED_G 4 LED_O AUDIORL3 AUDIOR+ L2 AUDIOLL5 AUDIOL+ L4
MENU KEY_DOWN KEY_UP SOURCE_SELECT AUTO_ADJ PWR_SW
LP1 1 2 3 4 1 2 3 4 LP2
CN4 8 7 6 5 8 7 6 5 MENU KEY_DOWN KEY_UP SOURCE_SELECT AUTO_ADJ LED_O LED_G PWR_SW 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 MENU1 TP AUTO_ADJ1 TP 1 MENU KEY_DOWN1 AUTO_ADJ PWR_SW1 TP 1 KEY_DOWN KEY_UP1 1PWR_SW TP 1 KEY_UP TP14 TP 1 SOURCE_SELECT LED_G
TP
LED_O1 TP
LED_O
LED_G1 TP
BSTHI1 TP TP
1BSTHI FSTHI1 1 OE POL1 1 GVOFF
TP
FSTHI STV1
TP
STV CKV1
TP
1 CKV VCM_PWM
OE1 GVOFF1
TP
POL STB1
TP
STB VCM_PWM1
TP
CP1
CP2
D C B A
D C B A
D C B A
D C B A
TP
GVON1 TP
GVON
GND_POWER
5 6 7 8
5 6 7 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
1
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 CN1 GND_POWER
4 3 2 1 CA
4 3 2 1 CA CA
GND_POWER V33D V33D 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 CN2 GND_POWER
5 5 5
STV CKV OE 5 5 5 5 5 5
STV CKV OE FR0N FR0P FR1N FR1P FR2N FR2P POL STB FCKN FCKP 5 5 5 5 5 5 5 5 5 5 5 5 FG0N FG0P FG1N FG1P FG2N FG2P FB0N FB0P FB1N FB1P FB2N FB2P FSTHI
R69 R68 R65 FR0N FR0P FR1N FR1P FR2N FR2P R67 R66
V33S
V33S 5 5 5 5 POL STB FCKN FCKP
LED_ORG
R70
1 Q12
LED_GRN
R71
1 Q13
FG0N FG0P FG1N FG1P FG2N FG2P FB0N FB0P FB1N FB1P FB2N FB2P FSTHI
2
R73 R72 LED_O LED_G
FSTHI
Model Title Date
I/F
Rev:
82
VX2245wm-1
11. PCB Layout Diagrams
83
VX2245wm-1
84
VX2245wm-1
85
VX2245wm-1
86
VX2245wm-1
87
VX2245wm-1
88
VX2245wm-1
89
VX2245wm-1
90
VX2245wm-1
* Readers Response*
Dear Readers: Thank you in advance for your feedback on our Service Manual, which allows continuous improvement of our products. We would appreciate your completion of the Assessment Matrix below, for return to ViewSonic Corporation. Assessment A. What do you think about the content of this Service Manual?
Unit 1. Precautions and Safety Notices 2. Specification 3. Front Panel Function Control Description 4. Circuit Description 5. Adjustment Procedure 6. Troubleshooting Flow Chart 7. Recommended Spare Parts List 8. Exploded Diagram and Exploded Parts List 9. Block Diagrams 10. Schematic Diagrams 11.PCB Layout Diagrams Excellent Good Fair Bad
B. Are you satisfied with this Service Manual?

Item 1. Service Manual Content 2. Service Manual Layout 3. The form and listing Excellent Good Fair Bad
C. Do you have any other opinions or suggestions regarding this service manual? Readers basic dada: Name: Company: Add: Tel: E-mail:
After completing this form, please return it to ViewSonic Quality Assurance in the USA at facsimile 1-909-839-7943. You may also e-mail any suggestions to the Director, Quality Systems & Processes (marc.maupin@viewsonic.com)
Title:
Fax:
91
VX2245wm-1

Service Manual: Viewsonic Vx2245Wm-1

Uploaded by

Copyright:

Available Formats

Service Manual: Viewsonic Vx2245Wm-1

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Service Manual: Viewsonic Vx2245Wm-1

Uploaded by

Copyright:

Available Formats

Service Manual

(VX2245wm-1_SM Rev. 1a Oct. 2006)

Confidential - Do Not Copy

10. Schematic Diagrams 11. PCB Layout Diagrams

Confidential - Do Not Copy

1. Precautions and Safety Notices

Confidential - Do Not Copy

Confidential - Do Not Copy

Take out the monitor with cushion

Place the monitor on a clean & soft foam pad .

Confidential - Do Not Copy

Output Signal Sync Compatibility Compatibility Power Voltage Power Consumption

USB Card reader Speaker

Ergonomics OSD Control Dimension Weight Operating Condition Storage Condition

Confidential - Do Not Copy

ViewDock Multimedia base Spec.

Confidential - Do Not Copy

Product definition and specification

ViewSonic Quick Start Guide

Confidential - Do Not Copy

4-1 GENERAL specification

4-2 VIDEO INTERFACE

POWER SUPPLY (LCD Head)

Power Saving Operation(Method) Power Consumption Recovery Time

4-4 ELECTRICAL REQUIREMENT Horizontal / Vertical Frequency

@ 70 Hz, 31.5 KHz

@ 85 Hz, 37.9 KHz

@ 60 Hz, 31.5 KHz

@ 70 Hz, 31.5 KHz

@ 70 Hz, 31.5 KHz

@ 85 Hz, 37.9 KHz @ 60 Hz, 31.5 KHz

Confidential - Do Not Copy

it should recall factory setting when execute

Short Cuts Function from the button(s)

Main Menu Controls

Confidential - Do Not Copy

4-6 AUDIO INTERFACE (LCD SIDE-SPEAKER SPECIFICATION)

* No any sympathetic or abnormal noise allowed.

Confidential - Do Not Copy

4-7 TFT LCD PANEL 1st Source Panel

110 nits Lv (sRGB) 140 nits

Lv (6500K) / Lv (Max) x 100% > 85%

Lv (9300k) / Lv (Def) x 100% > 70%

Lv (7500k) / Lv (Def) x 100% > 75%

Lv (5400k) / Lv (Def) x 100% > 75%

* 50% units of shipment shall be equal or better than typical CR spec.

No visible saturation >1 and <3 level saturation

Preset Color Temperatures

Confidential - Do Not Copy

3. Front Panel Function Control Description

Adjusting the Screen Image

Main Menu with OSD controls

Front Control Panel shown below in detail

Standby Power On/Off Power light Blue = ON Orange = Power Saving

Confidential - Do Not Copy

4. To adjust the setting, press the up

Confidential - Do Not Copy

Main Menu Controls

Confidential - Do Not Copy