VT2730-1M SM 1a

Service Manual
ViewSonic VT2730-1M
Model No. VS13154-1M
27 LCD TV
(VT2730-1M_SM Rev. 1a Mar. 2010)
ViewSonic
381 Brea Canyon Road, Walnut, California 91789 USA - (800) 888-8583
Copyright
Copyright 2010 by ViewSonic Corporation. All rights reserved. No part of this publication may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or
computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical,
manual or otherwise, without the prior written permission of ViewSonic Corporation.

Disclaimer
ViewSonic makes no representations or warranties, either expressed or implied, with respect to the contents
hereof and specifically disclaims any warranty of merchantability or fitness for any particular purpose. Further,
ViewSonic reserves the right to revise this publication and to make changes from time to time in the contents
hereof without obligation of ViewSonic to notify any person of such revision or changes.

Trademarks
Optiquest is a registered trademark of ViewSonic Corporation.
ViewSonic is a registered trademark of ViewSonic Corporation.
All other trademarks used within this document are the property of their respective owners.

Revision History

Revision SM Editing Date ECR Number Description of Changes Editor
1a 03/26/10 Initial Release Sophia Kao

ViewSonic Corporation Confidential - Do Not Copy VT2730-1M
1
TABLE OF CONTENTS
1. Precautions and Safety Notices................................................................. 3
3. Front Panel Function Control Description................................................ 11
4. Circuit Description....................................................................................... 31
5. Adjustment Procedure................................................................................ 38
6. Trouble Shooting Flow Chart................................................................ ..... 62
7. Block Diagram............................................................................................. 64
8. Schematic Diagrams.................................................................................... 65
9. PCB Layout Diagrams ................................................................................. 75
10. Exploded View And Exploded Parts List.................................................. 81
11. Recommend Spare Parts List................................................................... 84
2. Specification................................................................................................. 5
2
1. Precautions and Safety Notices
1. Appropriate Operation
(1) Turn off the product before cleaning.
(2) Use only a dry soft cloth when cleaning the LCD panel surface.
(3) Use a soft cloth soaked with mild detergent to clean the display housing.
(4) Disconnect the power plug from AC outlet if the product is not used for a long period of time.
(5) If smoke, abnormal noise, or strange odor is present, immediately switch the LCD display off.
(6) Do not touch the LCD panel surface with sharp or hard objects.
(7) Do not place heavy objects on the LCD display, video cable, or power cord.
(8) Do not use abrasive cleaners, waxes or solvents for your cleaning.
(9) Do not operate the product under the following conditions:
- Extremely hot, cold or humid environment.
- Areas susceptible to excessive dust and dirt.
- Near any appliance generating a strong magnetic field.
- Place in direct sunlight.
2. Caution
No modification of any circuit should be attempted. Service work should only be performed after you are
thoroughly familiar with all of the following safety checks and servicing guidelines.
3. Safety Check
Care should be taken while servicing this LCD display. Because of the high voltage used in the inverter
circuit, the voltage is exposed in such areas as the associated transformer circuits.
4. Power Supply Requirements
The external AC power operating range shall be from 90 to 264Vac
5. LCD Module Handling Precautions
5.1. Handling Precautions
(1) Since front polarizer is easily damaged, pay attention not to scratch it.
(2) Be sure to turn off power supply when inserting or disconnecting from input connector.
(3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
(4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
(5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
(6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth
when handling.
(7) Do not open nor modify the Module Assembly.
(8) Do not press the reflector sheet at the back of the module to any directions.
(9) In case if a Module has to be put back into the packing container slot after once it was taken out
from the container, do not press the center of the CCFL Reflector edge. Instead, press at the far
ends of the CFL Reflector edge softly. Otherwise the TFT Module may be damaged.
(10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the
Interface Connector of the TFT Module.
(11) After installation of the TFT Module into an enclosure (LCD monitor housing, for example), do
not twist nor bend the TFT Module even momentary. At designing the enclosure, it should be
taken into consideration that no bending/twisting forces are applied to the TFT Module from
outside. Otherwise the TFT Module may be damaged.
(12) Cold cathode fluorescent lamp in LCD contains a small amount of mercury. Please follow local
ordinances or regulations for disposal.
(13) Small amount of materials having no flammability grade is used in the LCD module. The LCD
module should be supplied by power complied with requirements of Limited Power Source
(IEC60950 or UL1950), or be applied exemption.
(14) The LCD module is designed so that the CFL in it is supplied by Limited Current Circuit
(IEC60950 or UL1950). Do not connect the CFL in Hazardous Voltage Circuit.
3
5.2. Handling and Placing Methods
Correct Methods: Incorrect Methods:
Only touch the metal frame of the LCD panel or the
front cover of the monitor. Do not touch the surface
of the polarizer.
Surface of the LCD panel is pressed by fingers and
that may cause Mura
Take out the monitor with cushions Taking out the monitor by grasping the LCD panel.
That may cause Mura
Place the monitor on a clean and soft foam pad. Placing the monitor on foreign objects. That could
scratch the surface of the panel or cause Mura
4
2. Specification
LCD panel of this product shall be provided by CMO with a model number of M270H1-L01.The
following table defines this panel specification. Any changes in panel must be pre-approved by
ViewSonic in written.
Parameter Specification
LCD Type
a-Si TFT Active Matrix Wide Color, Transmissive Mode,
Normally Black
LCD Interface 2-Channel LVDS
Resolution (Native) 1920 x 1080
Display Area 27 diagonal; 597.89 (H) x 336.31 (V) mm
Pixel Pitch 0.3114 (H) x 0.3114(V) mm
Viewing Angle H = 170, V = 160 with CR_10 (Typical)
Contrast Ratio 1200:1 (Typical)
Brightness 300 nits (Typical)
Response Time 3.4 ms, (Typical), g-g
Brightness Uniformity 1.33 (Max), measured per panel spec.
Chromaticity(CIE1931) White-x:0.313,White-y:0.329 (Standard Mode Only)
Colors 16.7M (8-bits)
Surface Treatment Hard coating (3H)
Backlight 4 CCFLs (Cold cathode Fluorescent Lamp)
Preset Color Panel Default
Gray Scale 0-255
Rated Life (Backlight) > 50KHrs*(ILO at 3.0mA)
Front Screen Artifacts
VS Standard:
a.) No Visible Streaking, Sag or Smearing artifacts when
driven by the specified video cards (see 7.1 General Test
Equipment) in the primary mode (VGA & 60 Hz) and after
user adjustment
b.) No image drift or lose fine-tune settings due to panel
temperature change.
Panel Acceptance Spec
Refer to the panel acceptance criteria specification.
Note: Intermittent and/or Display Pattern defects which result
in further bright or dark dots will be counted individually
against the above specification.
Note: Also refer to the panel defect acceptance specification.
Panel performance characteristics MUST BE met in all display modes/inputs at standard test
conditions.
1. RF Tuner
RF tuner of this product shall be provided by Samsung DTVA50FVH10109B for NTSC/ATSC. The
following table defines this tuner specification.
RF Tuning Range
NTSC/ATSC: 55.25 to 803 MHz, 2-69 Channels for Off-Air and
1-125 Channels for CATV
RF Tuner Sensitivity (S/N
Ratio at un-weight)
44 dB (min.)// 48 dB (max.)
Channel Bandwidth NTSC/ATSC/Digital Cable: 6 MHz Maximum
CVBS Characteristics:
Video Amplitude Signal
0.8(min.)1.2(max.) V
Audio Characteristics:
SIF out level
500mV (typ.)
Compatible system TUNER NTSC/ATSC/QAM
Compatible system AV NTSC M
5
2. Video
Built-in A/D converter shall provide analog to digital converter for this product.
Input Parameter Specification
CVBS Characteristics:
DC Level Sync Pulse
0.7(min.) 1.1(max.) V
Typical. 0.3 V
S-Video Characteristics:
Y : 1.0Vp-p W / Neg. Sync (IN 75 )
C : 0.285Vp-p (IN 75 )
Y, Pb, Pr Characteristics:
Y:1.0Vp-p (IN 75 )
Pb:0.7 Vp-p(IN 75 ),Pr:0.7 Vp-p (IN 75 )
Video Bandwidth NTSC: 6 MHz Maximum
HDMI Characteristics Panel Link T.M.D.S HDMI-1.3
RGB Characteristics:
Signal Type
Sync Type
Input Signal Rating
Sync Level:
Frequency Range
Pixel Color
DDC Compliance
EDID Data Table
Analog VGA
TTL, Separate Sync, with 2.2K: pull-down resistors
1250mV Max without damage to the product, 0-700 mV Full Range
2.5-5.25 V
Horizontal: 30-82K Hz, Vertical: 55-76 Hz
16.7 M
DDC2B Compliant, Rev 1.3
Refer to Appendix
3. Audio
Audio amp of this product shall be provided by TI with a Model Number of TPA3113D2 .
MST MSD3003 for VT2730-1M shall be used as sound processor. In addition, a pair of speakers shall
be integrated within this product. The audio signals of this product shall comply with the specification
listed in the following table.
Tuner Input Base band Input
Power Output Max Rating 5W at 10 % T.H.D Distortion 5W at 10% T.H.D Distortion
Speaker Impedance main speaker :6 main speaker :6
Line In
NTSC: BTSC Mono / Stereo(standard)
PAL: FM Mono / Stereo(standard)
500 mV rms (Typ)
1.6 V rms (Max)
Impedance: 600 ohms
Line Out earphone jack
500 mV rms
15 mW@32
Flatness of Amplitude
Response
+/- 3 db (at 1KHz @1W) +/- 3 db (at 1KHz @1W)
Total Harmonic Distortion
(Po=0.1 to 1 W, f=1KHz)
<2% <2%
Signal to Noise:
12 dB (100Hz to 1KHz)
8 dB (1kHz to 10kHz)
35 dB (100Hz to 10 kHz)
6
4. Electrical
The following table defines the electrical specification of this product.
ELECTRICAL SPECIFICATION
1 Power Input Voltage Range 100-240VAC +/- 10% Wide Range
2 Input Frequency Range 47-63 Hz
3 Input Current 1.0A @ 115VAC // 0.5A @ 230VAC
4 Power Supply Inrush
Max in < 80A (with fully loaded power supply) at 230Vac
Shall not result in permanent failure of power supply
(including blown fuse)
5 Power Consumption: 70 W (Normal), 75W (Max) // Stand by: < 1W
6 Interference with RF and Video
There shall be no visible interference between power supply,
RF and video signals. This applies to all available RF
channels and video modes.
7 Electromagnetic Compatibility
This product shall adhere to the compatibility and immunity
specifications in FCC.
8
Power Supply Transient Immunity
(Supply Transients and Outage)
Able to withstand an ANSI / IEEE C62.41 1980 2000V
ring wave with no damage.
9 Surge Immunity Test
Able to withstand 1.25X nominal Line Voltage for one cycle
with no damage.
10
Power Supply Missing Cycle
Immunity
Function properly without reset or visible screen artifact
when 1/3 cycle of AC Power is randomly missing.
11 Power Supply Acoustics
The Power Supply shall not produce audible noise that would
be detectable by the user (Excluding Power Supply Fan).
Audible shall be defined in accordance with ISO 7779
(DIN EN27779:1991).
Power Switch noise shall be Excluded.
12 Efficiency >= 80% @ full load, nominal line
13 Leakage Current <0.5mA @ 240VAC
14 Power Saving(DPMS) N/A
15 Recovery Time < 3 sec.
16 Power Factor Correction Compliant with EN61000-3-2
5. Firmware & OSD
The product firmware of VS13154-1M shall have a firmware version of V2.00EB0. Any
changes/revisions afterward shall also be pre-approved by ViewSonic in written. For VS13154-1M, its
firmware shall have a built-in frequency table for NTSC/ATSC off-air TV/CATV, and with MTS
implementation.
All audio/video and other output adjustments shall be performed by using an On Screen Display (OSD)
via a Remote Control Unit (RCU) in conjunction with the front panel adjustments.The following tables
list the OSD functions supported by VS13154-1M.
OSD Table for VS13154-1M
Picture Mode Standard, Dynamic, Soft ,Personal
Contrast 0~50~100
Brightness 0~50~100
Sharpness 0~50~100
Tint 0~50~100
Color 0~50~100
PICTURE
Color Mode Cool, Normal, Warm, Personal
7
Zoom Mode Movie Scale, Zoom In,4:3, Normal
NR Middle, Strong, Off, Weak,
Sound Mode Standard, Music, Movie, Sports, Personal
Treble/Bass Bass, Treble, Balance
Audio Language(ATSC) English, French, Spanish
Surround Sound SRS TruSurround HD, Off
AUDIO
Audio Only On, Off
Sleep Timer OFF, 5,10,15,30,45,60,90,120,180,240 Min
Time Zone
Pacific, Alaska, Eastern, Central, Mountain, Hawaii,
Atlantic
DST On, Off
Time-Format 12/24-hour
Auto Sync On, Off
TIME
Clock Year, Month, Day, Hour, Min, OK, Cancel
Menu Language English, French, Spanish
Transparency 0%,25%,50%,75%,100%
OSD Time Out 5,15,30,45,60 sec.
Closed Caption CC off, CC on, CC on mute
Basic Selection off, CC 1~4 Text 1~4
Advanced
Selection(ATSC)
off, Service 1~6
Custom, Font style, Front size, Font edge style
Font edge color, FG color, BG color, F G Opacity Option(ATSC)
DG Opacity
Restore Default Yes, No
Input label
TV,AV,S-Video, YPbPr, HDMI1, HDMI2,HDMI3,PC,
USB
DCR On, Off
Display Mode Home, Retail
Media SlideShow Timer 5Sec,10sec,30Sec,1Min,30Min
Trans. Effect
Random, None, Right Drag Left Drag, Down Drag, Up
Drag, S-Play, N-Play, Fade In/Out, Fly In/Out
File List Sorting
None, Sort by Name, Sort by Name Z->A, Sort by
Size, Sort by Date, Sort by Date New->Old
OPTION
SlideShow Repeat on, Off
TV Source Air, Cable
Auto Scan
Scan all channels, Digital channel only, Analog channel
only
Favorite
Show/Hide
Channel No.
Channel Label
CHANNEL
DTV Signal
LOCK Enter Password
8
6. Remote Control Unit (RCU)
An IR remote control unit shall accompany this product along with battery. In addition, this remote
control unit shall have an operational distance of 5 meters and an operational angle of 15 degrees for both
horizontal and vertical. Besides the key-code and protocol has fully conformed to VS standard.
Type IR; Made by Sighter Electronics Co., Ltd.
Range
Off axis r 15q t 5M
On axis: t 7M
Life Testing
(Buttons)
100,000 cycle operations at a rate of 20~30 cycle / minute without load (with
battery)
Color
Painting Color - PANTONE 427C (Black for front & back cover)
Power Key - PANTONE 032C (RED)
Key Pads PANTONE 10C & PANTONE 7C(Cool Gray)
Texts Printed on Front Cover and Key Pads - PANTONE 427C
Protocol VS key-code & protocol.
9
7. Mechanical
The following table defines the mechanical specifications of this product for both chassis and cabinet.
Dimension
W/O stand
646.3 x 465.7 x 227.8 mm
646.3x 409.7x 74.8 mm
Net Weight 6.97 kg
Gross Weight 8.85 kg
Net weight *without*
stand
5.58 kg
Chassis Plastic Material ABS (ABS HB / PC)
External Plastic Chassis
Components
Plastic Chassis, Cover, Stand (Metal + Plastic),Lens and Button
Exterior Chassis
Color/Texture/Details
Refer to Product ID Guide
Chassis Color Drift Due
to UV-Light
The color drift due to UL-Light shall be less than 10 Delta E in the 1976
CIE L*a*b color space. Testing shall be performed according to the
requirements of ASTM Test Method D4459-93.
Molded Plastic Workmanship shall be inspected according to ViewSonic Molded Plastic
Parts Specification, VSCMPPSPEC001V1.2.
Screen Printed Parts,
Bird Logo Recess
Artwork shall be provided and confirmed by ViewSonic.
Rear Label A label identifying the product name, model/serial number and FCC
ID/Logo shall be placed into the rear label recess located on the rear panel
of the chassis.
Wall Mount 100 mm x 200 mm VESA high hole (n=4), M4 X 10mm , pitch =0.7mm
screw mounting kit not included.
Sample Sample of textured color chips, plastic material specification, and Material
Safety Data Sheets shall be submitted to ViewSonic prior to Mass
Production Release.
In addition, all exterior surfaces shall have uniform texture/color. The maximum acceptable gap between the
buckets to bezel plastic pieces shall be within 1 mm. The maximum acceptable gap between LCD panel and
bezel shall be within 1.5 mm.
8. Environmental
The following table defines the operational/storage conditions of the product.
Operating Temperature 0qC to +40qC
Humidity 10% ~ 65% non-condensing
Altitude 0 meter to +2000 meters above sea level
Storage Temperature -20qC to +60qC
Humidity 0 ~ 90% non-condensing
Altitude 0 meter to 12,000 meters above sea level
10
3. Front Panel Function Control Description
Front View of the Product
E
L Item Description
1 Power LED Indicator Lights up in blue when the TV is turned on. Lights up in orange
when the TV is in standby mode.
2 Remote Control Receiver Receives IR signals from the remote control.
3 Volume Up Increase sound volume or adjust a highlighted control while in
OSD menu.
4 Volume Down Decrease sound volume or adjust a highlighted control while in
OSD menu.
5 MENU Turn OSD menu ON/OFF.
6 CH Up Channel up when source is TV, or select a control while in OSD
menu.
7 CH Down Channel down when source is TV, or select a control while in
OSD menu.
8 INPUT Select input source.
9 Power ON/OFF button Turn the power on from standby mode or turn the power off to
return to the standby mode.
11
Item Description
1 Power (AC input) Plug-in the supplied AC Power cord and connect to the AC input
power source.
2 USB Connect to your USB devices, such as USB fash drive/ portable hard
drive.
3 HDMI 1 Input Terminal Connect this port to the HDMI output of A/V device.
5 PC Audio input Connect the RGB Audio Out on your computer to the RGB Audio
on the rear of the LCD TV.
6 VGA signal input Connect a 15-pin D-sub RGB cable to the RGB output of your
computer and the other end to the RGB input on the rear of the LCD
TV.
7 YPbPr signal input Connect this port to the YPbPr output of A/V device.
8 YPbPr signal Audio
input (left/ right)
Connect the Audio in cable for YPbPr from this jack to the
corresponding connectors on your A/V device.
9 Audio output Connect this port to your A/V device with audio in (RCA)
connectors or to audio amplifer.
10 AV/ S-Video Audio
input (left/ right)
Connect the Audio in cable for AV/ S-Video from this jack to the
corresponding connectors on your A/V device.
11 Composite Video input Connect this jack to the composite video output connectors on your
A/V equipment.
Rear View of the Product
12
Item Description
12 S-Video input Connect the S-Video cable from the compatible device to this
connector on the rear panel of the LCD TV.
13 TV Input Jack Connect this jack to your Cable or VHF/UHF antenna.
14 Headphone Jack Connect to your headphones. By connecting the headphones, you can
listen to the sound from the TV on headphones.
If you connect the headphones, the TV speakers will be muted.
16 SPDIF Optical output Connect this port to the SPDIF input of A/V device.
13
Remote Control
E
N
G
L
I
S
H
Buttons located at the side of the LCD TV will operate the same as
these buttons on the remote control.
Button Description
1 POWER Power ON/OFF
2 MTS Select Mono, Stereo or SAP sound
3 INFO Display current information
4 SLEEP Set timer to turn off TV
5 ZOOM Adjust window size
6 0~9, -
number
buttons
Directly channel select
14
E
N
G
L
I
S
H
Button Description
7 GUIDE Show electronic program guide (EPG)
8 - VOL + Press to adjust the volume.
9 LIST Select channel from program list
10 EXIT OSD exit
11 /
ENTER
buttons
Press these buttons to navigate the OSD menus.
/ is Ior menu and Iunction select, and / is
for function adjustment.
ENTER: Enter the function setting.
12 INPUT Input source select
13 MUTE Volume mute ON/OFF
14 TV Direct to TV source
15 C.C Select caption mode
16 RETURN Press to return to previous channel.
17 CH Press to change the channels up or down.
18 FAV Select from preset Favorite Channels
19 MENU Press to turn the OSD (On-Screen Display) menu
on.
15
Operation
Storing Channels into Memory
1. Press the MENU button to display the OSD main menu.
2. Press or to select the 'CHANNEL menu, then
press ENTER or to enter the menu. Press or
to select 'TV Source, and use or to select the
antenna connection to 'Air or 'Cable.
Air: RF signal programs by 'Air.
Cable: RF signal programs by 'Cable.
3. Press or to select 'Auto Scan, then press to
enter.
4. Press or to select 'Scan all channels, 'Digital
channel only, or 'Analog channel only and press to
perform Auto Scan function.
To stop scanning, press MENU at any time.
5. The Auto Scan screen will be shown, and after it is
done, the screen will return to the frst Iound channel.
Viewing the Menus
There are six top menus on the screen: PICTURE,
AUDIO, TIME, OPTION, LOCK, and CHANNEL.
( CHANNEL menu can only be enabled in TV
source.)
2. Press or to select your desired top menu.
3. Press ENTER or to enter the menu you select.
4. Use to select the control you want to adjust.
5. When selecting the control with , press to enter
next level menu or enable the Iunction. ( will only
appear when the control is highlighted)
6. Press to adjust or select the settings.
7. Press MENU to exit from the OSD menu.
16
Selecting the Input Source
To select the TV or other external input sources connected
to the TV.
1. Press the INPUT button on the remote control.
2. Press or to select the required input source between
TV, AV, S-Video, YPbPr, HDMI1, HDMI2, HDMI3,
PC or USB.
(When in USB input source, the system only supports
JPEG, BMP and PNG image fles.)
3. To confrm the selection, press ENTER.
Favorite Channel Setting
To set your favorite channel into memory:
press ENTER or to enter the menu. Press or
to select 'Favorite, then press button to
enter 'Favorite setting.
3. Press or to select the channel you`d like to be your
favorite channel.
Press ENTER to confrm your selection.
4. To cancel the selection, Press ENTER again on the selected
channel.
5. Press MENU to exit.
To view your favorite channels, press FAV button to
show Favorite List and select your favorite channels that
have already been stored.
17
Channel Name Setting
To edit a name for the current channel:
press ENTER or to enter the menu.
3. Press or to select 'Channel No., then press or
to select the channel you want to edit the name.
4. Press or to select 'Channel Label, then press
button to enter 'Channel Label setting.
5. Use or to choose letters or signs, or to move
forward or backward.
6. After you input the channel name, press MENU or
ENTER to complete the setting.
Adding/Erasing Channel
When the channel is erased, it will not appear on the
screen when you browse the channels with CH
button. To see the channel again, you must add the channel
or perIorm the 'Auto Scan (page 11) Iunction again.
press ENTER or to enter the menu. Press or to
select 'Show/Hide, then press
button to enter 'Show/Hide setting.
3. Press or to select the channel you want to Show/
Hide, and check or uncheck it with ENTER button.
18
Adjusting the Settings
1.
(1) Press the MENU button to display the OSD main menu.
(2) Press or to select your desired top Menu, then
(3) Press or to select the control oI 'Contrast,
'Brightness, 'Sharpness, 'Tint, 'Color,'Bass,
'Treble,'Balance,then press or to adjust
the level.
(4) Press MENU to exit.
2.
(3) Press or to select the control oI 'Picture Mode,
'Color Mode, 'Zoom Mode, 'Noise Reduction,
'Sound Mode, 'MTS, 'Audio Language (only in DTV
mode), 'Surround Sound, 'Audio Only, 'Sleep Timer,
'Time Zone, 'DST, 'Time Format, 'Auto Sync,
'Menu Language, 'Transparent, 'OSD Time Out,
'DCR (Dynamic Contrast Ratio), 'TV Source,'Channel
No.,then press or to select your desired option.
(4) Press MENU to exit.
3.
(3) Press or to select the control with , including
'Clock, 'Closed Caption, 'Restore DeIault,'Input
Label,'Auto Scan, 'Favorite, 'Show/Hide,
'Channel Label, then press to perIorm the
function or enter detailed settings.
19
Closed Caption Setting
2. Press or to select the 'OPTION menu, then
Press or to select 'Closed Caption, then press
button to enter 'Closed Caption setting.
3. Press or to select CC Mode, Basic Selection, or
Advanced Selection, and use or to make your choice.
Basic Selection: To set basic analog closed caption
options. (CC1~CC4, TEXT1~TEXT4, Off)
Advanced Selection: To select closed caption signal
formats and set up caption modes for digital TV
channels. (Service1~6, Off)
Setting up Time menu
2. Press or to select the 'TIME menu, then
3. Press or to select 'Sleep Timer, and press or
to set the 'Sleep Timer Irom 5~240 min, or OII.
4. Press or to select 'Time Zone, and select the correct
time zone oI your area with or . The displayed time
oI 'Clock will be changed at the same time automatically.
To adjust 'Clock, select 'Clock and press . Use
or to change between year/ month/ date/ hour/ minute,
or to adjust. When you fnish adjustment, select
'OK and press ENTER to complete the setting.
The 'Clock time can only be adjusted manually
when 'Auto Sync is set to 'OII.
5. Press or to select 'DST (Daylight Saving Time),
and select On or OII with or according to the time
zone oI your area. The 'Clock time will change
automatically.
6. Press or to select 'Time Format, and or to
select 12-hour or 24-hour.
20
Using the Parent Controls
2. Press or to select the 'LOCK menu.
3. Press ENTER or to enter Password.
4. Enter the password. (The default password is 0000)
5. Move to 'System Lock, and select 'On to enable the
detailed settings.
6. Move to 'US or 'Canada rating system.
For detailed Close Caption setting:
1. Press or to select 'Option, then press to enter
'Option setting.
2. Press or to select the Mode to be 'Custom, and then
use or to select desired options and use or to
adjust detailed settings.
When you select the Mode to be 'DeIault, you can
not adjust the detailed settings.
21
US: Press to set TV or MPAA ratings.
(1) TV
1. Press or to select 'TV, then press
to enter 'TV rating system setting.
2. Press or to select your desired TV ratings
level.
The following screen will allow you to customize
the following TV ratings:
Y (all children)
Y7 (older children)
G (general audience)
PG (guidance suggested)
14 (strongly cautioned)
MA (mature audience)
You can also customize the TV ratings for the
following content:
ALL (All types content)
FV (fantasy violence)
V (violence)
S (sexual situations)
L (adult language)
D (sexsual dialog)
3. Press ENTER to set or reset each area.
(2) MPAA
1. Press or to select 'MPAA, then
press to enter 'MPAA rating system setting.
2. Press or to select your desired MPAA ratings
level.
The MPAA ratings level are defned as Iollowing:
G (general audience)
PG (parental guidance suggested)
PG-13 (recommended for children 14 years of age
or older)
R (mature audience)
NC-17 (no one under 17 years of age)
X (adult audience only)
N/A (not applicable)
3. Press / to set or reset each area.
22
Canada: Press to set Canadian English and French
ratings.
(1) Canadian English
1. Press or to select 'Canada Eng.
2. Press to enter.
3. Press or to select your desired Canadian
English rating level.
The Canadian English rating levels are defned as
following:
C (children)
C8+ (children eight years and older)
G (general programming, suitable for all audiences)
PG (parental guidance)
14+ (viewers and older)
18+ (adult programming)
EXEMPT (exempt)
(2) Canadian French
1. Press or to select 'Canada Fre.
2. Press to enter.
3. Press or to select your desired Canadian
French rating level.
The Canadian French rating levels are defned as
following:
G (genenral)
8ans+ (children eight years and older)
13ans+ (not appropriate for children of less than 13
years)
16ans+ (not appropriate for children of less than 16
years)
18ans+ (reserved to adults)
EXEMPT (exempt)
23
To Block Unrated Movie or TV Programs
1. Press or to select 'Unrated Lock, then press
or to select 'On or 'OII. When 'On is selected,
all programs that are not rated will be blocked.
To Set Rating Region Table
RRT Setting defines the rating standard for a particular
geographic region and/ or country.
1. Press or to select 'RRT Setting, then press to
enter RRT setting.
2. Select each adjustable setting with or , then press
or to select the sub-selection.
The picture here only shows an example of the content
of RRT Setting. However, the selections and sub-
selections of RRT Setting may be different in your OSD
menu according to the local broadcasting system.
To reset RRT setting, move to 'Reset RRT, and press
to reset.
To Change Password
1. Press or to select 'Change Password, then press
to enter 'Change Password setting.
2. Move to 'Enter Old Password, then enter the old
password with number keys.
3. Enter your new password on 'Enter New Password.
4. Enter your new password again on 'Confrm Password.
After you complete the last step, the screen will return to
the top page oI LOCK menu. II so, the password has been
changed successfully.
24
To block by Input Source
1. Press or to select 'Input Block.
2. Press or to select the input source, then or
to select Irom 'Block or 'UnBlock.
To Restore Factory Setting
2. Press or to select the 'OPTION menu.
3. Press ENTER or to enter 'OPTION menu.
4. Press or to select 'Restore DeIault, then press
to restore the factory default setting.
5. Select 'Yes and press ENTER to confrm the setting.
25
Using PC Function
1. When in PC source, press the MENU button to display
the OSD main menu.
2. Press or to select the 'PICTURE menu, then
3. Press or to select your desired controls, and press
or to adjust.
4. For advanced PC Iunctions, select 'Advanced (only
in PC source) and press to enter.
5. Press or to select 'H-Pos (H-Position), 'V-Pos
(V-Position), 'Clock,'Phase or 'Auto (Auto
adjustment), and adjust the level with or .
When in PC source, the other menus are the same as or
similar to when in other source.
When there is no signal in the PC mode, 'No Signal will
be displayed on the screen and the TV will automatically
turn into power-saving mode after a few seconds idleness.
Press INPUT or POWER button on the remote control
and the TV will return to VGA mode.
26
Using USB Function
1. When input source is selected to USB, insert the USB
device into the USB jack. USB only supports JPEG,
BMP and PNG image fles (With symbol).
2. Use or to select the Iolder you want, and press
ENTER (See Figure1).
3. Return to main menu, press or to --' and press
ENTER (See Figure 2). Use or to select the
image fles you want, and press ENTER (See Figure 3).
In USB mode, you can use the buttons to make
following functions:
Press INFO can view all of the functions (See Figure 4)
Press EXIT go back to the previous page.
Use or to display the next or previous picture.
Use or to rotate right or rotate leIt the picture.
(Only available in X1.0 mode)
Press ZOOM to zoom in. (X1.5~X4.0)
When the Zoom mode, press to move.
Press ENTER to auto-play or stop the pictures.
In Option menu can setup following functions:
2. Press or to select 'Option menu, then press
ENTER or to enter the menu. Press or to
select 'Media, and use to enter 'Media setting.
!!SlideShow Timer:
To select the pictures auto-play interval time.
!!Trans. Effect:
To select the auto-play effects of the slide show.
!!File List Sorting:
To select the pictures arrange.
!!SlideShow Repeat:
To select the slide show repeat to On or Off.
Figure1
Figure2
Figure3
Figure4
27
Annotations for OSD Menu Items
See below for meanings of the control items in each menu.
Picture menu
Picture Mode: To select picture mode.
Contrast: To adjust contrast of video.
Brightness: To adjust luminance of video.
Sharpness: To adjust picture sharpness.
Tint: To adjust tint level.(Except PC source)
Color: To adjust color.(Except PC source)
Color Mode: To select and adjust color mode.
Zoom Mode: To select image size between Normal,
Movie Scale, Zoom in and 4:3.(Except PC source)
Noise Reduction: To reduce the noise level of connected
equipment.(Except PC source)
Advanced: To fne tune the image. (Only enabled in
PC source)
H. Pos: To adjust the horizontal position of the
picture.
V. Pos: To adjust the vertical position of the picture.
Clock: To adjust delay time of clock in order to
reduce the noise of picture.
Phase: To adjust delay time of phase in order to
reduce the noise of picture.
Auto: To auto adjust pictures horizontal position,
vertical position, clock, phase, fne tune and H-Size.
Audio menu
Sound Mode: To select Sound modes.
Bass: To adjust bass.
Treble: To adjust the treble.
Balance: To adjust left and right audio balance.
Audio Language: To select available audio language.
(Only available in DTV)
Surround Sound: To select 'SRS TruSurround HD
effect or not.
Audio Only: To turn off the screen picture but keep the
sound on.
MTS: To select audio mode.(EX: Mono, Stereo, SAP)
(Only available in ATV)
28
Time menu
Sleep Timer: To set the off timer.
Time Zone: To select the time zone appropriate to
your location.
DST: To turn on/off daylight saving.
Time Format: To select 12-hour or 24-hour.
Auto Sync: To turn on/off Auto Sync.
Clock: To set the clock.
Option menu
Menu Language: To select OSD language.
Transparent: To select OSD (On Screen Display)
transparent level.
OSD Time Out: To select OSD show time.
Closed Caption: To set close caption options.
(Only available in TV, AV, S-Video source)
Restore Default: To restore the factory default settings.
Input Label: To Change the input source name.
DCR: To turn on/off the DCR (Dynamic Contrast Ratio)
function.(Except USB source)
Over Scan: To select this function to On or Off in
HDMI1, HDMI2 and HDMI3.(Only available when
input signal is in video timing. Ex:480i, 480p, 720p,
1080i, 1080p)
Media: To set the picture slide show setting.(Only
available in USB source)
29
Lock menu
Change Password: To Change the current Password.
System Lock: To select On or Off to Lock parent
control.
Unrated Lock: To block unrated movie or TV
programs.
Input Block: To block by input source.
US: Select TV and MPAA to set the parent control.
Canada: Select Canadian English and Canadian French
to set the parent control.
RRT Setting: To set Rating Region Table.
Reset RRT: To reset Rating Region Table.
Channel menu
TV Source: To select TV source. Select 'Cable to
watch cable TV channels, and select 'Air to watch air
TV channels.
Auto Scan: To auto scan ATV and DTV channels.
Favorite: To set your favorite channel into memory .
Show/Hide: To set the cannel show or hide.
Channel No.: To select the cannel you want to edit the
name.
Channel Label: To edit a name for the current cannel.
DTV Signal: To display the detected signal strength of
the current DTV channel.
Notes:Initial password:0000
If you forget your initial password,you can press"3660"to resume.
30
4. Circuit Description
z A/D converter
This brick convert is the 110-220AC input voltage to 24V output for inverter use and 5V for panel ,
system and audio use and 3.3V,1.8V for controller use.
z INVERTER
In order to drive the CCFLs embedded in the panel module, there is a half bridge inverter to convert by
the controller.
The input 24V up to hundreds of AC voltage output.
The inverter is formed by symmetric in order to drive the separate lamp modules.
The input stage consists of a PWM controller, half bridge inverter, and switching MOSFET to convert
DC input into AC output.
The output stage consists of a tuning capacitor, coupling capacitor, transformer, push-pull MOSFET
pair to boost AC output up to hundreds of voltage.
And one resister is serial to lamp for output voltage feedback.
There are two signal to control the inverter which come from system.
Logic high level which send to I901 is turn on the inverter.
BRI signal control brightness by DC level which was integral from PWM signal.
zI113 Scaler MSD3003EG
The MSD3003EG is a highly integrated controller IC for LCD/PDP DTV applications with resolutions
up to full-HD (1920 x 1080). It is configured with an integrated triple-ADC/PLL, a multi-standard TV
video and audio decoder, a motion adaptive video de-interlacer, a scaling engine, the MStarACE-3
color engine, an advanced 2D graphics engine, a transport processor, a high-definition (HD) MPEG
video decoder, a 24-bit DSP for MPEG audio decoding, a DVI/HDCP/HDMI receiver, and a peripheral
control unit providing a variety of HDTV control functions.
For digital TV application, the MSD3003EG comprises an MPEG-2 transport processor with advanced
section filtering capability, an MPEG-2 (MP@HL profile) video decoder, Dolby Digital (AC-3)/MPEG
layer I and II digital audio decoder with analog audio outputs that are designed to support ATSC
HD/SDTV programs while handling ATSC CC and EPG. With additional software support, the
MSD3003EG can be used in DVB-T standard areas such as part of Asia, Africa, and Australia.
Furthermore, it is also possible to decode JPEG, MP3 formats from external sources such as USB
interfaces.
For analog TV the MSD3003EG includes NTSC/PAL/SECAM multi-standard video decoder
comprising a 3D motion adaptive comb filter and time-based correction, and a BTSC/A2/EIA-J audio
decoder to support worldwide television standards. In addition, the MStar advanced LCD TV
processor enhances video quality, motion adaptive
de-interlacer, picture quality adjustment units, and MStarACE-3 color engine.
For multimedia applications, the MSD3003EG includes an build-in MStars proprietary M-link
interface, making it possible for the MSD3003EGto decode media (such as H.264 or MPEG-4) files via
the companion chip.
By integrating peripherals including USB 2.0 host controller, UART, IR, SPI, I2C, and PWM, the
MSD3003EG fulfills
all requirements in advanced DTV sets. To further reduce system costs, the MSD3003EG also
integrates intelligent power management control capability for green-mode requirements and
spread-spectrum support for EMI management.
PIN DESCRIPTION
VCLAMP CVBS/YC Mode Clamp Voltage Bypass H3
REFP Internal ADC Top De-coupling Pin H4
REFM Internal ADC Bottom De-coupling Pin H5
REXT Analog Input External Resister 390 ohm to AVDD_33 F4
HSYNC0 Schmitt Trigger Input w/
31
5V-tolerant
HSYNC / Composite Sync for VGA Input from channel 0 K6
VSYNC0 Schmitt Trigger Input
VSYNC for VGA Input from channel 0 J6
HSYNC1 Schmitt Trigger Input
HSYNC / Composite Sync for VGA Input from channel 1 G6
VSYNC for VGA Input from channel 1 G5
VSYNC for VGA Input from channel 2 T3
BINM Analog Input Reference Ground for Analog Blue Input N3
BIN0P Analog Input Analog Blue Input from Channel 0 N2
BIN1P Analog Input Analog Blue Input from Channel 1 J1
BIN2P Analog Input Analog Blue Input from Channel 2 R3
GINM Analog Input Reference Ground for Analog Green Input N1
GIN0P Analog Input Analog Green Input from Channel 0 M3
GIN1P Analog Input Analog Green Input from Channel 1 J3
GIN2P Analog Input Analog Green Input from Channel 2 T2
SOGIN0 Analog Input Sync On Green Input from Channel 0 L3
SOGIN1 Analog Input Sync On Green Input from Channel 1 J2
SOGIN2 Analog Input Sync On Green Input from Channel 2 T1
RINM Analog Input Reference Ground for Analog Red Input M2
RIN0P Analog Input Analog Red Input from Channel 0 M1
RIN1P Analog Input Analog Red Input from Channel 0 K1
RIN2P Analog Input Analog Red Input from Channel 0 U1
Analog Video Input/Output Interface
Pin Name Pin Type Function Pin
CVBS7 Analog Input CVBS (Composite) Video Input Channel 7 K3
CVBS6 Analog Input CVBS (Composite) Video Input Channel 6 K2
CVBS5 Analog Input CVBS (Composite) Video Input Channel 5 L2
CVBS4 Analog Input CVBS (Composite) Video Input Channel 4 L1
CVBS3 Analog Input CVBS (Composite) Video Input Channel 3 P3
CVBS2 Analog Input CVBS (Composite) Video Input Channel 2 R2
CVBS1 Analog Input CVBS (Composite) Video Input Channel 1 R1
CVBS0 Analog Input CVBS (Composite) Video Input Channel 0 W3
VCOM1 Analog Input CVBS Input Reference Ground P2
VCOM0 Analog Input CVBS Input Reference Ground Y3
CVBSOUT0 Analog Output CVBS (Composite) Video Output Channel 0 U2
CVBSOUT1 Analog Output CVBS (Composite) Video Output Channel 1 P1
Analog Audio Input/Output Interface
SIF0P Analog Input SIF Audio Input Channel 0 Y1
SIF0M Analog Input Reference Ground for SIF Audio Input Channel 0 Y2
I2S_OUT_MCK Output Audio Master Clock Output C13
I2S_OUT_WS Output Word Select Output; 4mA driving strength D13
I2S_OUT_BCK Output Audio Bit Clock Output C12
I2S_OUT_SD Output Audio Serial Data Output; 4mA driving strength E12
I2S_OUT_MUTE/UART1_RX Output Audio Output Mute Control /Universal Asynchronous Receiver
1
C10
SPDIFO Output S/PDIF Audio Output; 4mA driving strength B11
I2S_IN_WS I/O Word Select Input C14
I2S_IN_BCK I/O Audio Bit Clock Input D14
I2S_IN_SD Input Audio Serial Data Input A13
SPDIFI Input w/ 5V-tolerant S/PDIF Audio Input B13
AUL0 Analog Input Audio Line Input Left Channel 0 J4
AUR0 Analog Input Audio Line Input Right Channel 0 J5
AUL1 Analog Input Audio Line Input Left Channel 1 K4
AUR1 Analog Input Audio Line Input Right Channel 1 K5
AUL2 Analog Input Audio Line Input Left Channel 2 L6
32
AUR2 Analog Input Audio Line Input Right Channel 2 L4
AUL3 Analog Input Audio Line Input Left Channel 3 L5
AUR3 Analog Input Audio Line Input Right Channel 3 M6
AUL4 Analog Input Audio Line Input Left Channel 4 M5
AUR4 Analog Input Audio Line Input Right Channel 4 N6
AUL5 Analog Input Audio Line Input Left Channel 5 N4
AUR5 Analog Input Audio Line Input Right Channel 5 N5
AUCOM Analog Input Reference Ground for Audio Line Input M4
AUVRM Analog Output Negative Reference Voltage for Audio ADC R4
AUVRP Analog Output Positive Reference Voltage for Audio ADC P4
AUVAG Analog Output Reference Voltage for Audio Common Mode P5
AUOUTL2 Analog Output Main Audio Output Left Channel 2 W1
AUOUTR2 Analog Output Main Audio Output Right Channel 2 V1
AUOUTL1 Analog Output Main Audio Output Left Channel 1 W2
AUOUTR1 Analog Output Main Audio Output Right Channel 1 V2
AUOUTL0 Analog Output Main Audio Output Left Channel 0 V3
AUOUTR0 Analog Output Main Audio Output Right Channel 0 U3
TS Input Interface
TS0CLK Input w/ 5V-tolerant TS Clock T5
TS0DATA[7:0] Input w/ 5V-tolerant TS Data in Parallel; LSB (bit 0) is for serial TS data U5, V5,
W5,Y5, U4, V4,W4, Y4
TS0VALID Input w/ 5V-tolerant TS Data Valid T4
TS0SYNC Input w/ 5V-tolerant TS Sync-Byte Indicator R5
TS1CLK Input w/ 5V-tolerant 2nd TS Clock H16
TS1DATA Input w/ 5V-tolerant 2nd TS Data in Parallel J17
TS1VALID Input w/ 5V-tolerant 2nd TS Data Valid J16
TS1SYNC Input w/ 5V-tolerant 2nd TS Sync-Byte Indicator H17
DVI/HDMI Interface
RXACKN DVI/HDMI Input Negative DVI/HDMI Input for A Link Clock Channel E1
RXACKP DVI/HDMI Input Positive DVI/HDMI Input for A Link Clock Channel E2
RXA0N DVI/HDMI Input Negative DVI/HDMI Input for A Link Data Channel 0 F1
RXA0P DVI/HDMI Input Positive DVI/HDMI Input for A Link Data Channel 0 F2
RXA1N DVI/HDMI Input Negative DVI/HDMI Input for A Link Data Channel 1 G1
RXA1P DVI/HDMI Input Positive DVI/HDMI Input for A Link Data Channel 1 G2
RXA2N DVI/HDMI Input Negative DVI/HDMI Input for A Link Data Channel 2 H1
RXA2P DVI/HDMI Input Positive DVI/HDMI Input for A Link Data Channel 2 H2
RXBCKN DVI/HDMI Input Negative DVI/HDMI Input for B Link Clock Channel A1
RXBCKP DVI/HDMI Input Positive DVI/HDMI Input for B Link Clock Channel A2
RXB0N DVI/HDMI Input Negative DVI/HDMI Input for B Link Data Channel 0 B1
RXB0P DVI/HDMI Input Positive DVI/HDMI Input for B Link Data Channel 0 B2
RXB1N DVI/HDMI Input Negative DVI/HDMI Input for B Link Data Channel 1 C1
RXB1P DVI/HDMI Input Positive DVI/HDMI Input for B Link Data Channel 1 C2
RXB2N DVI/HDMI Input Negative DVI/HDMI Input for B Link Data Channel 2 D1
RXB2P DVI/HDMI Input Positive DVI/HDMI Input for B Link Data Channel 2 D2
RXCCKN DVI/HDMI Input Negative DVI/HDMI Input for C Link Clock Channel Y8
RXCCKP DVI/HDMI Input Positive DVI/HDMI Input for C Link Clock Channel W8
RXC0N DVI/HDMI Input Negative DVI/HDMI Input for C Link Data Channel 0 Y9
RXC0P DVI/HDMI Input Positive DVI/HDMI Input for C Link Data Channel 0 W9
LVDS Interface
LVA0M Output LVDS A-Link Channel 0 Negative Data Output Y17
LVA0P Output LVDS A-Link Channel 0 Positive Data Output W17
33
LVA1M Output LVDS A-Link Channel 1 Negative Data Output V17
LVA1P Output LVDS A-Link Channel 1 Positive Data Output Y16
LVA2M Output LVDS A-Link Channel 2 Negative Data Output W16
LVA2P Output LVDS A-Link Channel 2 Positive Data Output V16
LVA3M Output LVDS A-Link Channel 3 Negative Data Output V15
LVA3P Output LVDS A-Link Channel 3 Positive Data Output Y14
LVA4M Output LVDS A-Link Channel 4 Negative Data Output W14
LVA4P Output LVDS A-Link Channel 4 Positive Data Output V14
LVACKM Output LVDS A-Link Negative Clock Output Y15
LVACKP Output LVDS A-Link Positive Clock Output W15
LVB0M Output LVDS B-Link Channel 0 Negative Data Output U20
LVB0P Output LVDS B-Link Channel 0 Positive Data Output U19
LVB1M Output LVDS B-Link Channel 1 Negative Data Output U18
LVB1P Output LVDS B-Link Channel 1 Positive Data Output V20
LVB2M Output LVDS B-Link Channel 2 Negative Data Output Y20
LVB2P Output LVDS B-Link Channel 2 Positive Data Output W20
LVB3M Output LVDS B-Link Channel 3 Negative Data Output V19
LVB3P Output LVDS B-Link Channel 3 Positive Data Output Y18
LVB4M Output LVDS B-Link Channel 4 Negative Data Output W18
LVB4P Output LVDS B-Link Channel 4 Positive Data Output V18
LVBCKM Output LVDS B-Link Negative Clock Output Y19
LVBCKP Output LVDS B-Link Positive Clock Output W19
M-Link Interface
MLINKB_TXP Output M-Link Positive Data Transmitter for B-Link T20
MLINKB_TXN Output M-Link Negative Data Transmitter for B-Link T19
MLINKB_RXP Input M-Link Positive Data Receiver for B-Link R20
MLINKB_RXN Input M-Link Negative Data Receiver for B-Link R19
MLINKA_RX0P Input M-Link Positive Data Receiver 0 for A-Link N20
MLINKA_RX0N Input M-Link Negative Data Receiver 0 for A-Link N19
MLINKA_RX1P Input M-Link Positive Data Receiver 1 for A-Link P20
MLINKA_RX1N Input M-Link Negative Data Receiver 1 for A-Link P19
Serial Flash Interface
SCK Output SPI Flash Serial Clock V12
SDI Output SPI Flash Serial Data Input Y13
SDO Input w/ 5V-tolerant SPI Flash Serial Data Output W13
SCZ Output SPI Flash Chip select V13
IRIN Input w/ 5V-tolerant IR Receiver Input C4
Parallel Flash Interface
PF_WEZ Output Parallel Flash Write Enable; active low R12
PF_CE0Z Output Parallel Flash Chip Enable 0; active low T12
PF_CE1Z Output NAND Flash Command Latch Enable
NOR Flash Chip enable 1; active low U14
PF_ALE Output Parallel Flash Address Latch Enable; active high T13
PF_OEZ Output NAND Flash Read Enable; NOR Flash Output
Enable; active low T14
F_RBZ Input NAND Flash Ready/Busy; active low
Not used by NOR Flash U12
PF_AD[15] Output NAND Flash Write Protect; active low
Bit[15] of NOR Flash Address/Data Bus U13
PF_AD[14:0] Output Parallel Flash Address/Data Bus; Bit[14:8] not
used by NAND Flash T7, U10, W7, T6, V9, Y6, V10, V11, U11, T8, R10, P18, P17, N18,N17
PF_D[7:0] Output NOR Flash Address/Data Bus for High Byte in
16-bit Mode V7, U8, V8, U6, V6, M16, M17, N16
GPIO Interface
GPIO[140:130] I/O w/ 5V-tolerant General Purpose Input/Output; 4mA driving strength E5, E6, D6,
34
C6, D7, C7, B7, R15, R16, R17, T18
GPIO[105:90] I/O General Purpose Input/Output; 4mA driving strength D8, B8, D9, B9,
E10, B14, B10, E11, C11, A11, A14, D15, C15, B15, D12, B12
GPIO[89:88] I/O General Purpose Input/Output; 4mA driving strength A15, A12
UART1_TX/ GPIO87 I/O w/ 5V-tolerant Universal Asynchronous Transmitter 1 General Purpose
Input/Output; 4mA driving strength C8
UART1_RX/ GPIO86 I/O w/ 5V-tolerant Universal Asynchronous Receiver 1 / General Purpose
Input/Output; 4mA driving strength A8
UART2_TX/ GPIO85 I/O w/ 5V-tolerant Universal Asynchronous Transmitter 2 / General Purpose
Input/Output; 4mA driving strength C9
UART2_RX/ GPIO84 I/O w/ 5V-tolerant Universal Asynchronous Receiver 2 / General Purpose
Input/Output; 4mA driving strength A9
GPIO79/ UART1_TX I/O w/ 5V-tolerant General Purpose Input/Output; 4mA driving strength /
Universal Asynchronous Transmitter 1 D10
I2S_IN_BCK/ GPIO68 I/O Audio Bit Clock Input / General Purpose Input/Output; 4mA driving
strength D14
I2S_IN_WS/ GPIO67 I/O Word Select Input / General Purpose Input/Output; 4mA driving strength
C14
GPIO[62:51] I/O w/ 5V-tolerant General Purpose Input/Output; 4mA driving strength K16, K17, L16,
L17, M16, M17, N16, N17, N18, P16, P17, P18
GPIO[44:20] I/O w/ 5V-tolerant General Purpose Input/Output; 4mA driving strength R11, T10,
T9, R10, R9, T8, U11, V11, W7, Y7, T7, U10, V10. W6, Y6, R7, T6, U9, V9, U7, V7, U8, V8,U6, V6
PWM3 Output Pulse Width Modulation Output; 4mA driving strength T16
PWM2 Output Pulse Width Modulation Output; 4mA driving strength U16
PWM1 Output Pulse Width Modulation Output; 4mA driving strength T15
PWM0 Output Pulse Width Modulation Output; 4mA driving strength U15
SAR3 Analog Input SAR Low Speed ADC Input 3;
General Purpose Input/Output B4
General Purpose Input/Output A4
SAR1 Analog Input SAR Low Speed ADC Input 1; General Purpose Input/Output A5
General Purpose Input/Output B5
DRAM Interface
MVREF Input Reference Voltage for DDR SDRAM Interface F15
A_MADR[12:0] Output DRAM Memory Address M18, A16, L20, M20,
B16, M19, C16, L18, A17, L19, B17, K19 , C17
A_BADR[1:0] Output DRAM Memory Bank Address J20, K20
A_MCLKE Output DRAM Memory Clock Enable J19
A_ODT I/O On-Die Termination E17
A_WEZ Output Write Enable; active low J18
A_RASZ Output Row Address Strobe; active low D17
A_CASZ Output Column Address Strobe; active low D16
B_MCLK Output DRAM Memory Positive Differential Clock A19
B_MCLKZ Output DRAM Memory Negative Differential Clock A18
B_DDR2_DQM[1:0] Output Data Mask for Low Byte; active high F18, E20
B_DDR2_DQS[1:0] I/O Data Strobe D20, E19
B_DDR2_DQSB[1:0] I/O Data Strobe Inverse D19, E18
B_MDATA[15:0] I/O DRAM Memory Data Bus D18, F19, C18, G18,
G19, C19, F20, C20, B20, G20, A20, H20, H19, B18, H18, B19
USB Interface
USB_DP Analog I/O USB Non Inverting Data Input/Output B6
USB_DM Analog I/O USB Inverting Data Input/Output A6
UART Interface
UART1_RX/ GPIO86 Input w/5V-tolerant Universal Asynchronous Receiver 1 /
General Purpose Input/Output; 4mA driving strength A8
35
I2S_OUT_MUTE/ UART1_RX Output Audio Output Mute Control /
Universal Asynchronous Receiver 1 C10
UART1_TX/ GPIO87 GPIO79/ UART1_TX I/O w/5V-tolerant Universal Asynchronous Transmitter 1 /
General Purpose Input/Output; 4mA driving strength General Purpose Input/Output; 4mA driving
strength / Universal Asynchronous Transmitter 1 C8 , D10
UART2_RX UART2_RX/ GPIO84 Input w/5V-tolerant I/O w/ 5V-tolerant Universal Asynchronous
Receiver 2 Universal Asynchronous Receiver 2 / General Purpose Input/Output; 4mA driving strength
D11, A9
UART2_TX UART2_TX/GPIO85 I/O w/5V-tolerant Universal Asynchronous Transmitter 2
Universal Asynchronous Transmitter 2 / General Purpose Input/Output; 4mA driving strength
A10 ,C9
Misc. Interface
DDCDA_DA I/O w/ 5V-tolerant HDCP Serial Bus Data / DDC Data of DVI/HDMI Port A G3
DDCDA_CK Input w/ 5V-tolerant HDCP Serial Bus Clock / DDC Clock of DVI/HDMI Port A G4
DDCDB_DA I/O w/ 5V-tolerant HDCP Serial Bus Data / DDC Data of DVI/HDMI Port B D3
DDCDB_CK Input w/ 5V-tolerant HDCP Serial Bus Clock / DDC Clock of DVI/HDMI Port B E3
DDCDC_DA I/O w/ 5V-tolerant HDCP Serial Bus Data / DDC Data of DVI/HDMI Port C R14
DDCDC_CK Input w/ 5V-tolerant HDCP Serial Bus Clock / DDC Clock of DVI/HDMI Port C R13
HOTPLUGA I/O w/ 5V-tolerant Hot-plug control for DVI/HDMI Port A F3
HOTPLUGB I/O w/ 5V-tolerant Hot-plug control for DVI/HDMI Port B C3
HOTPLUGC I/O w/ 5V-tolerant Hot-plug control for DVI/HDMI Port C P14
DDCA_DA I/O w/ 5V-tolerant DDC Data for Analog port F5
DDCA_CK I/O w/ 5V-tolerant DDC Clock for Analog port F6
DDCR_DA I/O w/ 5V-tolerant DDC Data for ROM U17
DDCR_CK I/O w/ 5V-tolerant DDC Clock for ROM T17
DDCR_DA2 I/O w/ 5V-tolerant DDC Data for ROM D11
DDCR_CK2 I/O w/ 5V-tolerant DDC Clock for ROM A10
XIN Crystal Oscillator Input Crystal Oscillator Input B3
XOUT Crystal Oscillator Output Crystal Oscillator Output A3
XTAL_OUT Output Clock Output for MStar Companion Chip R18
CEC I/O Consumer Electronics Control E4
HWRESET Schmitt Trigger Input w/ 5V-tolerant Hardware Reset; active high D5
AVDD_AU 3.3V Power Audio Power P6, R6
AVDD_LPLL 3.3V Power LPLL Power N15, P15
AVDD_MPLL 3.3V Power MPLL Power E7, E8
AVDD_MEMPLL 3.3V Power PLL Power H14
AVDD_33 3.3V Power ADC Power F7, F8, H6, H8, J8, K8, L8,
M8, N8
AVDD_DM 3.3V Power DM Power L13, M13
AVDD_USB 3.3V Power USB Power F14, G14
VDDP 3.3V Power Digital Input/Output Power F12, F13, F16, F17, J13, K13,
N9, N10
AVDD_MLINK 1.26V Power M-link Power M15
AVDD_PLLA_MLINK 1.26V Power M-link PLLA Power K15
AVDD_PLLB_MLINK 1.26V Power M-link PLLB Power L15
AVDD_DDR 1.8V Power DDR2 Power E15, E16, G15, G16, G17
VDDC 1.26V Power Digital Core Power E9, F9, F10, F11, H9, H10,
H11, H12, H13, N11, N12,
N13, P10, P11
GND Ground Ground A7, C5, D4, E13, E14, H15,
J9, J10, J11, J12, J15, K9,
K10, K11, K12, L9, L10, L11,
L12, M9, M10, M11, M12
No Connects
NC No connect. K18, R8, T11, W12, Y12
36
I118 DDR2
The EM68B16C is a high-speed CMOS Double-Data-Rate-Two (DDR2), synchronous dynamic
random-access memory (SDRAM) containing 512
Mbits in a 16-bit wide data I/Os. It is internally configured as a quad bank DRAM, 4 banks x 8Mb
addresses x 16 I/Os The device is designed to comply with DDR2 DRAM key features such as posted
CAS# with additive latency, Write latency = Read latency -1, Off-Chip Driver (OCD) impedance
adjustment, and On Die Termination(ODT). All of the control and address inputs are
synchronized with a pair of externally supplied differential clocks. Inputs are latched at the cross point
of differential clocks (CK rising and CK# falling)
All I/Os are synchronized with a pair of bidirectional strobes (DQS and DQS#) in a source synchronous
fashion. The address bus is used to convey row,
column, and bank address information in RAS # , CAS# multiplexing style. Accesses begin with the
registration of a Bank Activate command, and then
it is followed by a Read or Write command. Read and write accesses to the DDR2 SDRAM are 4 or
8-bit burst oriented; accesses start at a selected
location and continue for a programmed number of locations in a programmed sequence. Operating the
four memory banks in an interleaved fashion allows random access operation to occur at a higher rate
than is possible with standard DRAMs. An auto precharge function may be enabled to provide a
self-timed row precharge that is initiated at the end of the burst sequence. A sequential and gapless data
rate is possible depending on burst length, CAS# latency, and speed grade of the device.
I109 Tuner
The Antenna receive the TV signal and modulate it to the CVBS signal and ATSC signal which can be
recognized By the decoder and MTS audio signal output to the sound multiplexing decoder portion of
IC MSD3003
I130 TPA3113D2 AUDIO AMP
The TPA3113D2 is a 6-W (Per channel) efficient, Class-D audio power amplifier for driving
bridged-tier stereo speakers. Advanced EMI Suppression Technology enables the use of inexpensive
ferrite bead filters at the output while meeting EMC requirements. SpeakerGuaud speaker protection
circuitry includes an adjustable power limiter and a DC detection circuit. The adjustable power limiter
allows the user to set a virtual voltage rail lower than the chip supply to limit the amount of current
through the speaker. The DC detect circuit measures the frequency and amplitude of the PWM signal
and shuts off the output stage if the input capacitors are damaged or shorts exist on the inputs.
The output are also fully protected against short to GND, VCC, and output to output. The short circuit
protection and thermal protection includes an auto recovery feature.
I131 TPA6113A2
The TPA6113A2 is a stereo audio power amplifier packaged in an 8-pin SOIC package capable of
delivering 40mW of continuous RMS power per channel into 16- loads Amplifier gain is extermally
configured by means of two resistors per input channel and does not require external compensation for
settings of 0 to 20 dB.
I112 MSD809
The MSD1501 is a DTV receiver, which contains a digital receiver compatible with ATSC 8-VSB
mode for terrestrial broadcasting and open cable (SCTE DVS-031) which is in compliant with
64-QAM and 256-QAM modes for digital cable appliances.
It achieves extremely high performance employing direct IF sampling architecture,robust
synchronization, and robust channel equalization. It contains a 12-bit A/D converter and a PWM
generator for automatic gain control. A host interface with an I2C bus is also included to control the
behavior of the MSD1501.
37
5. Adjusting Procedure
5.1. ADJUSTMENT CONDITIONS AND PRECAUTIONS
1. Approximately 30 minutes should be allowed for warm up before proceeding.
2. Adjustments should be undertaken only on those necessary elements since most of them
have been carefully preset at the factory.
3. ESD protection is needed before adjustment.
5.2. MAIN ADJUSTMENTS
NO. FUNCTION DESIGNATION
1. EEPROM Initial Function Key
2. Adjust color temperature Function Key
5.3. ALIGNMENT PROCEDURES
Adjustment Conditions and Precautions:
(A). Power supply voltage:AC 110V 10% 50 Hz 5%.
(B). Warm up time:
The display must be power ON for at least 30 minutes at full white pattern before
starting alignments.
This is especially critical in color temperature and white balance adjustments.
(C). Video : reference the front detail specifications.
1. Eeprom Initial:
Press INPUT , KEY,POWER key go to factory mode.
2. Adjust color temperature
A. Enter to the factory mode, Source select D_Sub figure 2, Use 19200x1080@60Hz the pattern
is 5 block figure 1,then move the cursor to the White Balance figure 3. Press key. That will
do auto white balance.
B. After auto white balance, switch to the full white pattern then check the color temperature.
WARM (5400K): x=0.332 0.03 y=0.350 0.03
NORMAL (6500K): x=0.313 0.03 y=0.329 0.03
COOL (9300K): x=0.283 0.03 y=0.297 0.03
C. Enter to the factory mode, Source select YPbPr , Use NTSC Color Bar (FLUKE 54200 )
Figure 4, Set Color bar to 100 IRE then move the cursor to the White Balance figure 5. Press
Key figure 6. That will do auto white balance. Finally change 16 gray scale must be claire in each
grays.
38
figure 1 figure 2 figure 3
figure 4 figure 5 figure 6
3. Power Consumption Check ( VGA MODE )
A. TIMING: 1920 x 1080@60Hz
B. Pattern: 1010UPRIGHTNESS PATTERN
C. BRIGHTNESS=MAX, CONTRAST=MAX.
D. The power that each MODE consumed is shown in Chart 1.
MODE MAX POWER COMSUMED POWER LED COLOR
NORMAL 75W(max) BLUE
Stand-by 1W (max) ORANGE
Chart 1
4. Check the position of the picture displayed and phase auto adjusting (VGA MODE).
Depend on the TIMING of TIMING TABLE (TABLE 4) to switch MODE in order, stay about 10
seconds each MODE, it can changed and stored automatically each MODE. We cant switch over
to the next MODE until AUTO ADJUST disappears.
5. HDMI MODE FUNCTION TEST
A.DVI MODE: Depend on the TIMING of TIMING TABLE (TABLE 3 ) to check MODE in
order.
B.HDMI MODE: make sure the 480i, 480p, 720p, 1080i,1080p TIMING is right.
6. OSD FUNCTION TEST
Time:1920*1080@60Hz
Pattern: 16*12 pane
Make sure that Each FUNCTION has one right action.
7. DTV FUNCTION TEST
Both NTSC and ATSC system were mixed together. At this point in tuner to the joints on the need
for 'AIR NTSC and ATSC 2 both systems were mixed with the signal
Both CATV and DIGITAL CABLE two systems are mixed together. At this point in tuner to the
need for a joint 'CATV and DIGITAL CABLE two systems are mixed in a the signal
39
8. YPbPr, S-VIDEO, AV, TV, DTVS , HDMI, USBFUNCTION TEST
A. Input YPbPr, S-VIDEO, AV , TV, DTVS signal and check.
B. Input USA air channel (TABLE 1) and USA CATV channel for TV channel.
Under YPbPr , HDMI MODE, Make sure the 408i, 480P, 720P, 1080i,1080p is right.
Under USB to display JPEG, BMP format.
9. AUDIO FUNCTION TEST
A. Audio input includes PC AUDIO IN, S-VIDEO/AV AUDIO IN and YPbPr/DVI AUDIO IN.
B. Under PC MODE, input PC AUDIO signal, checks whether the action of AUDIO IN is right.
C. Under S-VIDEO/AV MODE, input L/R AUDIO signal, checks whether the action of AUDIO
IN is right.
D. Under YPbPr MODE, input L/R AUDIO signal, checks whether the action of AUDIO IN is
right.Under HDMI MODE, checks whether the action of AUDIO IN is right Under TV MODE,
checks whether the action of AUDIO IN is right.
E. In DTV mode, the input signal ATSC, confirmed AUDIO LANGUAGE and the normal
movements PARENT
10.Under PC MODE, input PC AUDIO signal, determines whether the action of INT SPEAKER
output is right. Meets earphone with the EARPHONE, Determined whether the action of
EARPHONE output is normal.
11.DDC EDID confirm
VGA EDID confirm
By P106 VGA CONNECTOR DOWNLOAD EDID confirm whether normal or not
HDMI EDID confirm
By P109, P110, P111 HDMI CONNECTORS DOWNLOAD EDID confirm whether normal or
not
12.All Modes Reset
After final QC step, we must to erase all saved changes again and restore the factory defaults.
You should do memory recall again.
Turn off the LCD TV by pressing Power button
13.BURN IN Mode access methods
Key Pad followed by pressing the "MENU" + "ENTER" 2 KEY, entered BURN IN mode
14.DCR function confirm In all source. (VT2730-M model only)
A. DCR turn ON.
B. Input full white pattern then measure the luminance. For example Value A
C. Input full dark pattern the measure the luminace. For example Value B
D. These two value ratio must be more than 100000. (A/B).
40
TV Frequency Table:
U.S.A Channel (TABLE 1)
VIF 45.75 MHz, SIF 41.25 MHz
(UnitMHz)
Ch. Freq.range fp (picture) fs (sound) fosc Ch. Freq.range fp (picture) fs (sound) fosc
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
54 60
60 66
66 72
76 82
82 88
174 180
180 186
186 192
192 198
198 204
204 210
210 216
470 476
476 482
482 488
488 494
494 500
500 506
506 512
512 518
518 524
524 530
530 536
536 542
542 548
548 554
554 560
560 566
566 572
572 578
578 584
584 590
590 596
596 602
602 608
608 614
614 620
620 626
626 632
632 638
639 644
55.25
61.25
67.25
77.25
83.25
175.25
181.25
187.25
193.25
199.25
205.25
211.25
471.25
477.25
483.25
489.25
495.25
501.25
507.25
513.25
519.25
525.25
531.25
537.25
543.25
549.25
555.25
561.25
567.25
573.25
579.25
585.25
591.25
597.25
603.25
609.25
615.25
621.25
627.25
633.25
639.25
59.75
65.75
71.75
81.75
87.75
179.75
185.75
191.75
197.75
203.75
209.75
215.75
475.75
481.75
487.75
493.75
499.75
505.75
511.75
517.75
523.75
529.75
535.75
541.75
547.75
553.75
559.75
565.75
571.75
577.75
583.75
589.75
595.75
601.75
607.75
613.75
619.75
625.75
631.75
637.75
643.75
101.00
107.00
113.00
123.00
129.00
221.00
227.00
233.00
239.00
245.00
251.00
257.00
517.00
523.00
529.00
535.00
541.00
547.00
553.00
559.00
565.00
571.00
577.00
583.00
589.00
595.00
601.00
607.00
613.00
619.00
625.00
631.00
637.00
643.00
649.00
655.00
661.00
667.00
673.00
679.00
685.00
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
644 650
650 656
656 662
662 668
668 674
674 680
680 686
686 692
692 698
698 704
704 710
710 716
716 722
722 728
728 734
734 740
740 746
746 752
752 758
758 764
764 770
770 776
776 782
782 788
788 794
794 800
800 806
645.25
651.25
657.25
663.25
669.25
675.25
681.25
687.25
693.25
699.25
705.25
711.25
717.25
723.25
729.25
735.25
741.25
747.25
753.25
759.25
765.25
771.25
777.25
783.25
789.25
795.25
801.25
649.75
655.75
661.75
667.75
673.75
679.75
685.75
691.75
697.75
703.75
709.75
715.75
721.75
727.75
733.75
739.75
745.75
751.75
757.75
763.75
769.75
775.75
781.75
787.75
793.75
799.75
805.75
691.00
697.00
703.00
709.00
715.00
721.00
727.00
733.00
739.00
745.00
751.00
757.00
763.00
769.00
775.00
781.00
787.00
793.00
799.00
805.00
811.00
817.00
823.00
829.00
835.00
841.00
847.00
41
U.S.A. CATV (TABLE 2)
VIF 45.75 MHz, SIF 41.25 MHz
(UnitMHz)
Ch. Freq.range fp
(picture)
fs (sound) fosc Ch. Freq.range fp
(picture)
fs
(sound)
fosc
2
3
4
5A
5
6
A-5
A-4
A-3
A-2
A-1
A
B
C
D
E
F
G
H
I
7
8
9
10
11
12
13
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
AA
BB
CC
DD
EE
FF
GG
HH
II
2
3
4
1
5
6
95
96
97
98
99
14
15
16
17
18
19
20
21
22
7
8
9
10
11
12
13
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
54 60
60 66
66 72
72 78
76 82
82 88
90 96
96 102
102 108
108 114
114 120
120 126
126 132
132 138
138 144
144 150
150 156
156 162
162 168
168 174
174 180
180 186
186 192
192 198
198 204
204 210
210 216
216 222
222 228
228 234
234 240
240 246
246 252
252 258
258 264
264 270
270 276
276 282
282 288
288 294
294 300
300 306
306 312
312 318
318 324
324 330
330 336
336 342
342 348
348 354
55.25
61.25
67.25
73.25
77.25
83.25
91.25
97.25
103.25
109.25
115.25
121.25
127.25
133.25
139.25
145.25
151.25
157.25
163.25
169.25
175.25
181.25
187.25
193.25
199.25
205.25
211.25
217.25
223.25
229.25
235.25
241.25
247.25
253.25
259.25
265.25
271.25
277.25
283.25
289.25
295.25
301.25
307.25
313.25
319.25
325.25
331.25
337.25
343.25
349.25
59.75
65.75
71.75
77.75
81.75
87.75
95.75
101.75
107.75
113.75
119.75
125.75
131.75
137.75
143.75
149.75
155.75
161.75
167.75
173.75
179.75
185.75
191.75
197.75
203.75
209.75
215.75
221.75
227.75
233.75
239.75
245.75
251.75
257.75
263.75
269.75
275.75
281.75
287.75
293.75
299.75
305.75
311.75
317.75
323.75
329.75
335.75
341.75
347.75
353.75
101.00
107.00
113.00
119.00
123.00
129.00
137.00
143.00
149.00
155.00
161.00
167.00
173.00
179.00
185.00
191.00
197.00
203.00
209.00
215.00
221.00
227.00
233.00
239.00
245.00
251.00
257.00
263.00
269.00
275.00
281.00
287.00
293.00
299.00
305.00
311.00
317.00
323.00
329.00
335.00
341.00
347.00
353.00
359.00
365.00
371.00
377.00
383.00
389.00
395.00
JJ
KK
LL
MM
NN
OO
PP
QQ
RR
SS
TT
UU
VV
WW
AAA
BBB
CCC
DDD
EEE
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
354 360
360 366
366 372
372 378
378 384
384 390
390 396
396 402
402 408
408 414
414 420
420 426
426 432
432 438
438 444
444 450
450 456
456 462
462 468
468 474
474 480
480 486
486 492
492 498
498 504
504 510
510 516
516 522
522 528
528 534
534 540
540 546
546 552
552 558
558 564
564 570
570 576
576 582
582 588
588 594
594 600
600 606
606 612
612 618
618 624
624 630
630 636
636 642
642 648
355.25
361.25
367.25
373.25
379.25
385.25
391.25
397.25
403.25
409.25
415.25
421.25
427.25
433.25
439.25
445.25
451.25
457.25
463.25
469.25
475.25
481.25
487.25
493.25
499.25
505.25
511.25
517.25
523.25
529.25
535.25
541.25
547.25
553.25
559.25
565.25
571.25
577.25
583.25
589.25
595.25
601.25
607.25
613.25
619.25
625.25
631.25
637.25
643.25
359.75
365.75
371.75
377.75
383.75
389.75
395.75
401.75
407.75
413.75
419.75
425.75
431.75
437.75
443.75
449.75
455.75
461.75
467.75
473.75
479.75
485.75
491.75
497.75
503.75
509.75
515.75
521.75
527.25
533.75
539.75
545.75
551.75
557.75
563.75
569.75
575.75
581.75
587.75
593.75
599.75
605.75
611.75
617.75
623.75
629.75
635.75
641.75
647.75
401.00
407.00
413.00
419.00
425.00
431.00
437.00
443.00
449.00
455.00
461.00
467.00
473.00
479.00
485.00
491.00
497.00
503.00
509.00
515.00
521.00
527.00
533.00
539.00
545.00
551.00
557.00
563.00
569.00
575.00
581.00
587.00
593.00
599.00
605.00
611.05
617.00
623.00
629.00
635.00
641.00
647.00
653.00
659.00
665.00
671.00
677.00
693.00
689.00
42
DIGITAL CABLE TV Frequence Table (table 3)
U.S.A Channel Frequency Assignments (Cable)
unit:MHz.
CH NO. DTV Center Freq CH NO. DTV Center Freq CH NO. DTV Center Freq
2 57 43 339 84 585
3 63 44 345 85 591
4 69 45 351 86 597
5 79 46 357 87 603
6 85 47 363 88 609
7 177 48 369 89 615
8 183 49 375 90 621
9 189 50 381 91 627
10 195 51 387 92 633
11 201 52 393 93 639
12 207 53 399 94 645
13 213 54 405 95 93
14 223 55 411 96 99
15 129 56 417 97 105
16 135 57 423 98 111
17 141 58 429 99 117
18 147 59 435 100 651
19 153 60 441 101 657
20 159 61 447 102 663
21 165 62 453 103 669
22 171 63 459 104 675
23 219 64 465 105 681
24 225 65 471 106 687
25 231 66 477 107 693
26 237 67 483 108 699
27 243 68 489 109 705
28 249 69 495 110 711
29 255 70 501 111 717
30 261 71 507 112 723
31 267 72 513 113 729
32 273 73 519 114 735
33 279 74 525 115 741
34 285 75 531 116 747
35 291 76 537 117 753
36 297 77 543 118 759
37 303 78 549 119 765
38 309 79 555 120 771
39 315 80 561 121 777
40 321 81 567 122 783
41 327 82 573 123 789
42 333 83 579 124 795
43
TTV receiving test:
TV SIGNAL TEST ITEM
CENTRALISM TRANSMITTING SIGNAL CHECK CONTENT
SET CONTENT CHANNEL
ORDER
FREQUENCY
(MHz) PATTERN SOUND P/S(dB)
CHECK
CONTENT
CHANNEL 2 55.25 MONO SCOPE SWEEP TONE -10
ELECTRIC
ABNORMITY
SOUND
CHANNEL 6 83.25 COLOR BAR 400Hz -10 SOUND ,PICTURE
CHANNEL 7 175.25 Full White (100
IRE)
STEREO -10
STERO FUNCTION
CHANNEL 13 211.25 STAIR DUAL -10
SUB FUNCTION
CHANNEL 14 471.25 MULTIBURST MONO -16
IMAGE AND
SOUND DISTURB
CHANNEL 36 603.25 MULTIBURST MONO -10 TEST Close-caption T1
FUNCTION
CHANNEL 69 801.25 MONO SCOPE MONO(1KHz) -10 NOISE LIMMITTED
SENSITIVITY
TV TEST METHOD
A.CHANNEL2 Examines sound by ear, whether the sound does have mechanical resonation and
the electrical unusual sound, and image to sound disturbance.
B.CHANNEL6: Check sound and picture.
C.CHANNEL7: Examines whether the sound does receive the image disturbance, Judgment basis:
Whether there is unusual sound, input signal LEVEL<=36dBu,and STEREO SENSITIVITY is
normal.
D.CHANNEL13: Under main/sub/main-sub mode, check sub function.
E.CHANNEL14: Examines whether the sound does receive the image disturbance, Judgment basis:
Whether there is unusual sound.
F. CHANNEL 36:Check T1 of close-caption. Input signal level<=45dBu.
G.CHANNEL 69: Adjustment attenuator, If the critical point of the change of the image signal to
noise ratio is under LEVEL<=60dBu, regards as normally.
PRODUCTS OUTPUT CHECK ITEM.
The same as " CENTRALISM TRANSMITTING SIGNAL CHECK CONTENT"
saturation TEST, inputs the TV signal, the input signal LEVEL establishment most greatly is
90dBu,check whether CONTRAST of the image is normal; Whether appears the disturbance
phenomenon.
C.AFT CHECK,
(1) The frequency of the input TV signal is 211.25MHz (CH13), after confirmed the TV set
receives this signal, closure radio station; Then set frequency of the TV signal generator to be
212.25MHz, turn on the TV set and check whether the TV set receives the signal of CH13.
(2). The frequency of the input TV signal is 211.25MHz (CH13), after confirmed the TV set
receives this signal, closure radio station; Then set frequency of the TV signal generator to be
212.00MHz, turn on the TV set and check whether the TV set receives the signal of CH13.
(3). After all of FUNCTION TEST completed, we must erase all saved changes again and restore
the factory defaults.
DTV TEST ITEM
CHANNEL FREQUENCY SOUND dB PETTEN CHECK CONTENT
14 471.25MHz Y 50
Dynamic
picture
Picture
36 603.25MHz Y 50 Color bar Color
69 801.25MHz Y 75
Dynamic
picture
Sound and Picture
44
DTV CHECK METHOD
A.CHANNEL14: Check whether there are some pause or the mosaic phenomenon in the picture.
B.CHANNEL36: Check whether the color of the color bar is normal.
C.CHANNEL69: Turn RF attenuator and check the critical point of the change of the images S/N
is under LEVEL<45~85> dBu, regards as normally.
TIMING TABLE (FACTORY PRESET MODE) (table 4)
COMPATIBILITY TABLE
MODE
ASPECT RATIO
HANDLING COMPATIBLE INPUTS
STANDARD RESOLUTION FS*Full-Screen Composite SVHS YPbPr RGB HDMI
DOS 720x400 @ 70Hz 1920x 1080 No No No Yes Yes
VESA 640x480 @ 60Hz 1920x 1080 No No No Yes Yes
MAC 832x624 @ 75Hz 1920x 1080 No No No Yes Yes
VESA 1280x768 @ 60Hz 1920x 1080 No No No Yes No
VESA 1280x1024@ 60Hz 1920x 1080 No No No Yes Yes
VESA 1440x900@ 60Hz 1920x 1080 No No No Yes Yes
VESA 1680x1050@60Hz 1920x1080 NO NO NO Yes Yes
VESA 1920x1080@60Hz 1920x1080 NO NO NO Yes Yes
NTSC 480i(60Hz) 1920x 1080 Yes Yes Yes No Yes
SD 480p(60Hz) 1920x 1080 NO NO Yes No Yes
HD 720p(60Hz) 1920x 1080 No No Yes No Yes
HD 1080i (60Hz) 1920x 1080 No No Yes No Yes
Full HD 1080p (60Hz) 1920x 1080 No No Yes No Yes
5. 4 Firmware Upgrade Procedure
When you receive the returned LCD TV, please check whether the firmware version is the
latest. If not, please do the following procedures to upgrade it to the latest version.
5.4.1 Equipment Needed
- VT2730-M LCD TV
- Fixture for Firmware Upgrade
- VGA Cable
- PC (Personal Computer)
- Firmware Upgrade Program
- One additional LCD TV for checking the program execution
5.4.2 Connection PC to the Tv set by the tool as the follow picture (pc1~pc3)
Action: The D_SUB cable must be 15 pin, and the TV set must be AC ON
pc.1
45
pc 2
pc 3
5.4.3 Start the Isp
1. Open the I.exe
2. Press the config , if the the ISP board have been found ,you will see the picture as
bellow.
pc.4
46
3. Press the Connect ,If all the things are ok and ready, it will show the device type as
the bellow picture. Than pres
pc.5
4. Press read and choose the right F/W .
pc.6
47
5. Press Auto, than press Run. It will start ISP . When the ISP is ok ,you will see the
information as the bellow picture.
pc.7
6. Pull away the AC power Cord and the D-SUB Cable. And start another TV set.
When we start another TV set with AC ON, we only need to press the RUN
5.4.4 USB update process
Step 1: Turn off AC power.
Step 2: Plug USB device with correct file name (By each models) F/W into socket.
Step 3: Turn on AC power and wait for a moment to update automatically. During updating,
you can see LED light to flash.
Step 4. When F/W finish updating process, the TV set turn on automatically and turn off AC
power and unplug USB device manually.
5.5 VGA DDC Key In Procedure
Note:
1. Every time after replacing the main board, you have to do the DDC key in.
2. If you find the DDC does not conform to the LCD TV, you have to do the DDC key in.
- VT2730-M LCD TV
- DDC Card
- PC
- RS-232 cable
- Barcode Reader
- VGA Cable
48
! VT2730-M LCD TV DDC Card PC
!!!!!!RS-232 Cable VGA Cable Barcode Reader
5.5.2 Setup Procedure
1. Connect VGA Card and DDC Card with RS-232 cable.
2. Barcode Reader connects with keyboard and PC keyboard port.
3. Connect DDC Card and VT2730-M LCD TV with VGA Cable.
(when key in DVI DDC information, use VGA transform to DVI port )
4. Connect Power Cord to VT2730-M LCD TV.
5. Press MENUand ENTER at the same time, then go into the BURN IN MODE.
49
5.5.3 DDC Key In Procedure
1. run DDC exe
2. Choose model number the
50
3. Press ENTER key.
4. Press F4 key and Input bar code
51
5. Press ENTER key, then the successful picture is as follows. DDC DOWNLOED OK!
6. Exit program.
52
5.6 HDMI DDC Key In Procedure
There are three EDID files for the different HDMI connectors. So you must be download the
different EDID into each HDMI connector.
- VT2730-M LCD TV
- PC
- RS-232 cable
- Barcode Reader
- HDMI Cable
-
VT2730-M LCD TV PC
RS-232 Cable HDMI Cable Barcode Reader
5.6.2 Setup Procedure
1. Connect HDMI Card and DDC Card with RS-232 cable.!
2. Barcode Reader connects with keyboard and PC keyboard port.!
53
3. Connect DDC Card and VT2730-M LCD TV with HDMI Cable.
4. Connect Power Cord to VT2730-M LCD TV.!
!
5.6.3 DDC Key In Procedure
1. Run DDC.exe
2. Choose model number then
54
3. Press ENTER key.
4. Press F4 key.
55
5. Input bar code
6. Press ENTER key, then the successful picture is as follows. DDC DOWNLOED
OK!

7. Exit program
56
Packing For Shipping And Disassembly Procedure
Packing For Shipping
1. Packing Procedure
1.1 Paste protection film to protect the LCD TV. (Figure 1)
1.2 Put the LCD TV in the PE bag and seal the bag. (Figure 2)
1.3 Put the cushions on the LCD TV. (Figure 3)
1.4 Place the LCD TV into the carton and then Put the other cushions on the LCD TV,put all the
accessories into the carton. At last, close the carton and seal it with tape. (Figure 4)
Figure 4 Figure 3
Figure 1 Figure 2
Remote control Power Cord
1.Users Guide 2.Battery
57
Item ViewSonic P/N Ref. P/N Description Q'ty
1 NA VT2730M monitor 1
2 P-00008950 2013054065P POLYETHY BAG 1
3 P-00010152 2012118901P POLYFOAM(L) 1
4 P-00010153 2012118902P POLYFOAM(R) 1
5 P-00010154 2012118903P POLYFOAM(B) 1
6 P-00008947 2013222536P POLYETHY BAG 1
7 NA 2001132184P OWNER GUIDE 1
8 NA 2002400048P QUICK SETUP GUIDE(EN) 1
9 NA 2002400049P QUICK SETUP GUIDE(FR) 1
10 A-00005362 2427130046P AC POWER CORD 1
11 P-00010151 2011127065P CARTON BOX 1
12 NA 2055632349P LABEL 1
13 A-00008045 2005100500P BATTERY,DRY 2
14 A-00008696 2419200272P CONT BLOCK 1
ViewSonic Model Number: VS13154-1M
Rev:1a
PACKING PART LIST (VT2730-M)
58
Disassembly Procedure
1. Disassembly of Stand, Rear Cover and Shield Plate from LCD TV.
1.1 Unscrew 4 screws to remove Stand and Dust cover.
1.2 Unscrew 3 screws to remove Rear Cover.
Rear Cover
Stand
Dust cover
59
1.3 Unscrew 6 screws to remove Shield Plate.
2. Disassembly of Front Cover , Main Board, Power Board and Panel Unit.
2.1 Unscrew 2 screws to remove Power board.
Shield Plate.
Power Board
60
2.2 Unscrew 4 screws to remove Main board and Shield Plate.
2.3 Unscrew 1 screws to remove Front cover and Panel.
Main Board
61
6. Trouble Shooting Flow Chart
START
CHECK MAIN PCB
5V OK?
Y
CHECK
POWERPCB
D807,I801,I801
OK
N
3V3 OK?
Y
CHECK
I103,SUROUND CAP
BEAD OK?
N
D807,I801,I801
DTV-VDD33
CHECK
I110,SUROUND CAP
BEAD OK?
N
Y CHECK
I113
Y CHECK
I112
SUROUND CAP OK?
D807,I801,I801
VCC1V2-STOK?
CHECK
I108,SUROUND CAP
BEAD OK?
N
Y CHECK
I113
SUROUND CAP OK?
Y
Y
CHECK
P101
OK?
D807,I801,I801
PANEL 5V OK?
CHECK
Q110
N
Y
CHECK
I107
SUROUND OK?
Y
OK?
62
6.1 NO DISPLAY
Y
Power key Check
Work ok Keypad P701
Check
I701
N Check
X102
N N
Y
Check Check
PC SOUCE D-sub cable
Check
I119
N Check N N
Y
Check Check
AV SOUCE AV cable
Check
P108
N Check
L132, R254, C251
N N
Y
Check Check
S-Video SOUCE S-Video cable
Check N Check N N
L130, L131,
R259, R260
I107,SUROUND
Y
Check Check
YPbPr cable
Check N Check N N
R235, R236, R237 YPbPr SOUCE
Check
TV SOUCE
Check
RF CABLE
Check N Check N N
R160 I109 TUNER
I119,SUROUND
P107,SUROU
Check
PANEL 5V
Check
Q110
Check N Check N N
PANEL P117
P108,SUROU
Y
Check
HDMI SOUCE
Check
HDMI
Check N Check N N
I113 P109,P110,P111
Y
63
7. Block Diagram
MSD3003EG
-LF-S7
TPA3113D2
(Audio Amp.)
LCD Module
AV/SV Audio(RCA L/R)
PC/DVI Audio(mini jack)
YPbPr Audio(RCA L/R)
DDR2
Flash
MSB1501
(Demod.)
ATSC+NTSC
Combo Tuner
Speaker
SPDIF
(Optical)
HDCP & System
EEPROM
Headphone
CVBS / SIF
TPA6113A2
(Headphone Amp.)
RCA audio out
AV(CVBS)
S-Video
YPbPr
VGA (D-Sub)
HDMI 3
Connector
HDMI 2
Connector
HDMI 1
Connector
64
8. Schematic Diagrams
8.1. System Power
Vout=VFB*(1+RA/RB)
VFB=0.8V
RB=0.7K~5Kohm
1.3V Core Power
RA
RB
VCC1.8V for DDR2 Power
R1
R2
Vout=Vref*(1+R2/R1)+Iadj*R2
Vref=1.25V
12 1
measure current
12V INPUT/ 5A
high turn on
5V Power for normal operating
Panel Power
Lo: Off
Hi: On
H : Power on
L : Standby
12V Power for normal operating
Tuner Power
3.3V normal operating
3.3V Stand-by Power
For T7
<100
mS
VCC1.2V_FB
VCC1.2V_OUT
VCC5V_EN
VCC1.8V_ADJ
VCC5V_IN
VCC5V_OCSET
ADJ_PWM
BL_EN
Panel_ON-P1
VPANEL_IN
POWER_SW
TU_PW_CON
SW
POWER_SW
Dimming
VCC3.3V_ADJ2
DCR_EN
DCR
DCR
ADJ_PWM
ON_PBACK
TU_PW_CON
VCC3.3V_ADJ1
Panel_ON-P1
BL_EN
Dimming
DCR_EN
SW
SW
POWER_SW 4
DCR 4
ADJ_PWM 4
ON_PBACK 4
TU_PW_CON 10
Panel_ON-P1 4
VCC1.3V
5V_2
VCC1.8V
3.3V_2
3.3V_STB
5V_STB
5V_STB
5V_STB
PANEL-VCC
5V_STB
VCC12V
VCC12V 5V_DTV
5V_STB
VCC12V
+12V_AMP
5V_STB 5V_2
3.3V_2 5V_2
5V_STB 3.3V_STB
3.3V_STB 5V_STB
5V_STB
VCC12V
3.3V_STB
VCC12V
R105
10K/NC
R131
10K
C104
NC
1
1
C117
0.1uF
R121
110/1%
L101
FB/80R/6A
L109
FB/80R/6A
R118
82K
D101
SR36
R115
4.7K
C108
NC/0.1uF
C109
0.1uF
C131
0.1uF
R133
10K
R114 NC
R124
182/1%
+
C143
100uF/16V
R116
10K
R139
2.2K
+
C133
220uF/16V/LowESR
L107
NC/FB/80R/6A
L106
NC/FB/600R/1.5A
L104 22uH/SMD
R117
NC
R122
NC
R502
4.7K/NC
+
C115
220uF/16V/LowESR
C132
0.1uF
C124
0.1uF
C134
0.1uF
R518
NC
C120
NC
L108
FB/80R/6A
L112
22uH/SMD
R505
15K
I107 AP9435GM
1 8
2 7
3 6
4 5
S D
S D
S D
G D
R109
82K/NC
R128
110/1%
R126
3K
R507
NC
+ C110
470uF/16V/LowESR
Q103
NC/2N3904
1
3
2
I105
1084-ADJ
1
2 3
4
ADJ
VOUT VIN
TAB
C118
0.1uF
R104
NC
R136
200/1%
Q107
NC
1
3
2
R138
10K
R506
5.6K
+ C140
10uF/16V
R127
100K
C148
0.1uF
+
C142
100uF/16V
Q105
2N3904
1
3
2
R140
82K
R106
NC
Q110
2N3904
1
3
2
1
1
R146
1.21K/1%
R503
4.7K
R110
0R
I106
NC/1084-ADJ
1
2 3
4
ADJ
VOUT VIN
TAB
Q108
2N3904
1
3
2
R145
NC
I133
1117-ADJ
1
2 3
4
ADJ
VOUT VIN
TAB
C130
0.1uF
1
1
P101
S12B-PH
1
2
3
4
5
6
7
8
9
10
11
12
D102
SR36
R103 0R
L105
FB/600R/1.5A
+ C101
470uF/16V/LowESR
C150
NC/0.1uF
R504
4.7K
L111
NC/FB/600R/1.5A
C113
NC/0.1uF
R102 10K
+
C128
220uF/16V/LowESR
R125
1K
C136
0.1uF
C138
0.1uF
+
C126
470uF/16V/LowESR
I103
1117-ADJ
1
2 3
4
ADJ
VOUT VIN
TAB
C144
0.1uF
R107
NC
R111
NC/4.7K R112 10K
R108
4.7K
R142
NC
R123
NC
Q102
2N3904
1
3
2
L102
FB/120R/3A
R135
10K
+
C141
220uF/16V/LowESR
C107
0.1uF
R134
NC
L103 NC
C121
NC
C145
0.1uF
R141
3K
C129
0.1uF
+
C103
NC
R113
0R Q104
2N3904
1
3
2
I102 AP9435GM
1 8
2 7
3 6
4 5
S D
S D
S D
G D
C102
0.1uF/NC
R147
1.82K/1%
C146
NC/0.1uF
I108
AP1534
1
2
3
4 5
6
7
8
FB
EN
OCSET
VCC OUTPUT
OUTPUT
VSS
VSS
C147
0.1uF
R132
1.21K/1%
Q101
2N3904/NC
1
3
2
Q111
NC/2N3904
1
3
2
I101 AP9435GM/NC
1 8
2 7
3 6
4 5
S D
S D
S D
G D
L110 NC
1
1
I104
AP1534
1
2
3
4 5
6
7
8
FB
EN
OCSET
VCC OUTPUT
OUTPUT
VSS
VSS
R501
4.7K
R137
90.9/1%
C112
0.1uF
R143
100K
Q109
2N3904
1
3
2
C111
0.1uF
R144
4.7K
R130
6.49K/1%
C106
0.1uF/NC
C105
NC/0.1uF
C116
0.1uF
C139
0.1uF
C122
0.1uF
R129
182/1%
ADJ_PWM 4
ON_PBACK 4
65
8.2. Tuner & Demod
S5H1411
PIN43
S5H1409
NC
NC
PIN48
PIN47
PIN46
GND
NC
PIN42
Close to Scaler & Ground Shielding
GND
GND
GND
Tuner_CVBS Trace Width >= 15mil
SIFP0 Trace Width >= 15mil
Close to Scaler & Ground Shielding
VCC GND 0x72
If using 2ndReset,
Change R191 => 1K,
C215 => 1uF.
VCC VCC 0xF2
GND
NC
NC
I2CADDR0 I2CADDR1 S5H1409 Device ID
GND GND 0x32
GND VCC 0xB2
TEST_SEL4
TEST_SEL3
TEST_SEL2
TEST_SEL1
TEST_SEL0
R157 1K
0R
10K
56pF
NC
C162 100nF
1K
20nF
1K
1K
499R
NC
1501
NC
R152
R176
NC
NC
R154
25
MHz
1K
NC
R155
NC
NC
R156
1uH
C184
49.3811
MHz
S5H1411
C177
S5H1409
NC
NC
X101
R194
24.69
MHz
3rd overtone
3rd overtone
NC
1500pF
620pF
1M R172
L117
NC
RP01,
R184
NC
R187
NC
220R 1K
C178
Close to Tuner
C183
39pF
30pF
0R
3.3V DTV Demodulator
1.2V DTV Demodulator
SDA_TU
SCL_TU
IF-
IF+
IFN
SIFP
TUNER_CVBS
VCOM0
SIFM
IFP
AFT
AFTC AFT
TSA3
REF_TOP
TSA6
REF_BOT
2ndReset
TS_D6
TSA1
TS_VALID
TS_D3
EXT_PLL_SEL
I2CADDR0
TSA5
IFN
I2CADDR1
TSA7
SDA_TU
TS_D4
TS_D7
I2CADDR0
TSA2
SCL_TU
TSA4
I2CADDR1
TS_D2
TS_D0
REF_BOT
TSA0
IFP
RESET_N
TS_D5
EXT_PLL_SEL
I2C-SDA
TS_CLK
TS_SYNC
TS_D[7:0]
REF_TOP
IF_AGC IF_AGC
IF_AGC
IF_AGC IF_AGC
TS_D1
SIF
CVBS
T_IF_AGC
RESET_N
2ndReset
TS_D[7:0]
I2C-SDA
I2C-SCL
TS_SYNC
TS_VALID
TS_CLK
I2C-SCL
SIFP
SIFM
TUNER_CVBS
VCOM0
AFTC
2ndReset 4
TS_D[7:0] 4
I2C-SDA 4
I2C-SCL 4
TS_SYNC 4
TS_VALID 4
TS_CLK 4
SIFP 4
SIFM 4
TUNER_CVBS 4
VCOM0 4
AFTC 4
5V_AGC 5V_TU
5V_AGC
VDD_1.2
+1.2V_De
VDD_1.2
VDD_3.3 VDD_3.3
VDD_3.3
+3.3V_De
VDD_3.3
VDD_3.3 +3.3V_De
VDD_1.2
VDD_1.2
VDD_3.3
+1.2V_De
5V_DTV +3.3V_De
+3.3V_De
5V_TU
5V_DTV
5V_DTV
C166 47nF
C154 10nF
C155 10nF
L116
FB/120R/3A
R157
100K
C208
22pF
C177 27pF
R158
47
R173
1K
1
2
3
4
8
7
6
5
RP01 0Rx4
C174
0.1uF
R176
NC/1K C183
0.1uF
L115 NC/1uH
C196
22pF
R154 220
R172
1K
C173
0.1uF
R174
0R
R178
NC/1K
C201
0.1uF
C187
0.1uF
C163 0.1uF
C215
NC/10uF/10V/Y5V
C164
0.1uF
C188
0.1uF
C161 0.1uF
X101
25MHz
C189
0.1uF
C172 27pF
C194
0.1uF
R180 100
C171
NC/620pF
C176
10uF/10V/Y5V
C195
22pF
R160 47
C
1
5
2
2
2
u
F
_
1
0
V
R192 100
R182 1K
R190 100
R148 NC/1K/1%
C198
0.1uF
C185 0.1uF
C180
NC/1.5nF
C190
0.1uF
C160 10nF
C214
0.1uF
C207
0.1uF
C203
0.1uF
R156
2.2K
R175
121/1%
C205
0.1uF
1
2
3
4
8
7
6
5 RP03 100x4
I109
DTVA50FVH1019B
1
6
4
15
16
14
13
11
12
5
2
7
3
10
8
17
18
19
20
21
22
9
RF_AGC
NC
NC
IF(+)
IF(-)
IF_AGC
NC
SCL
SDA
NC
B+
NC
AFT
SIF
CVBS
GND
GND
GND
GND
GND
GND
NC
C192
0.1uF
C204
0.1uF
C213
0.1uF
L113
FB/120R/3A
+ C186
22uF/16V
C209
22pF
R188 4.7K
R155
47
R177
NC/1K
R167
NC/1M
C157
10uF/10V/Y5V
D103
NC/1N4148
R152 10K
R179 0R
+ C151
22uF/16V
L114
FB/120R/3A
C199
0.1uF
R171
NC/1K
C200
0.1uF
C162
NC
R187 4.7K
I110 1084-ADJ
1
2 3
4
ADJ
VOUT VIN
TAB
C179
10uF/10V/Y5V
R184 100
R153 220
I111 1117-ADJ
1
2 3
4
ADJ
VOUT VIN
TAB
R181 100
R150
NC/1K
1
2
3
4
8
7
6
5 RP02 100x4
R186 100
C206
0.1uF
R161
NC/75
+ C170
47uF/16V
R170
0R
I112
MSB1501
1234567891
0
1
1
1
2
1
3
1
4
1
5
1
6
1
7
1
8
1
9
2
0
2
1
2
2
2
3
2
4
2
5
7
5
5
6
7
4
5
3
7
3
5
2
7
2
6
1
7
1
5
8
7
0
5
5
6
9
5
1
6
8
5
9
6
7
6
0
6
6
5
7
6
5
5
4
6
4
6
2
6
3
39
50
38
37
49
36
48
35
42
34
47
33
46
32
45
31
44
30
43
29
40
28
41
27
26
77
76
78
79
80
83
82
84
81
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
T
U
N
E
R
_
S
D
A
G
P
IO
_
IN
1
V
D
D
1
2
IH
V
S
S
IP
H
P
K
D
A
T
A
7
P
K
D
A
T
A
6
P
K
D
A
T
A
5
P
K
D
A
T
A
4
V
D
D
1
2
IH
V
S
S
IP
H
P
K
D
A
T
A
3
P
K
D
A
T
A
2
P
K
D
A
T
A
1
P
K
D
A
T
A
0
V
D
D
3
3
O
P
H
V
S
S
O
H
R
E
S
E
T
_
N
T
E
S
T
_
B
IR
A
T
E
S
T
_
S
IG
0
T
E
S
T
_
S
IG
1
V
D
D
1
2
IH
V
S
S
IP
H
T
E
S
T
_
S
IG
2
T
E
S
T
_
S
IG
3
P
K
C
L
K
V
D
D
3
3
O
P
H
V
D
D
1
2
T
_
A
B
B
V
S
S
O
H
V
B
B
_
A
B
B
D
_
IN
4
V
S
S
T
_
A
B
B
D
_
IN
5
V
S
S
IP
H
D
_
IN
6
O
S
C
_
X
IN
D
_
IN
7
V
S
S
B
B
_
A
B
B
V
D
D
1
2
IH
V
D
D
1
2
T
_
A
B
B
V
S
S
IP
H
O
S
C
_
X
O
U
T
D
_
IN
8
V
D
D
3
3
O
P
H
D
_
IN
9
V
S
S
O
H
D
_
IN
1
0
F
IL
T
E
R
D
_
IN
1
1
C
L
K
_
E
X
T
_
A
D
C
V
D
D
1
2
IH
I2CADDR1
VDD12IH
I2CADDR0
SCL
VSSIPH
SDA
TEST_SEL0
VDD12IH
TEST_SEL4
VSSIPH
TEST_SEL1
EXT_PLL_SEL
TEST_SEL2
PKVAL
VDD12IH
VDD12IH
VSSIPH
VSSIPH
TEST_SEL3
PKERR
VSSOH
PKSYNC
VDD33OPH
VDD33OPH
VSSOH
VDD33TH_ABB
VSSBBH_ABB
CML
RN
RP
VSSBBTH_ABB
AIP
VDD33TH_ABB
AIN
VSSIPH
VDD12IH
D_IN3
D_IN2
D_IN1
D_IN0
VDD12IH
VSSIPH
VDD12IH
VSSIPH
IF_GAIN
TU_GAIN
GPIO_OUT1
TUNER_CLK
VDD33OPH
VSSOH
E-PAD
R151
NC/499/1%
C211
0.1uF
R149
NC/1K
C191
0.1uF
+
C184
470uF/16V/LowESR
C158
0.1uF
C202
0.1uF
C182
0.1uF
I132 NC/1117-ADJ
1
2 3
4
ADJ
VOUT VIN
TAB
PKERR TP01
C153
0.1uF
C193
0.1uF
C159
1nF
C210
0.1uF
R189 NC/0R
R185 100
C165 47nF
R159
100K
+ C197
22uF/16V
C212
0.1uF
R168
182/1%
C178
0.1uF
R191
NC/10K
C156
22nF
R183 100
R162 0R
R169
110/1%
L117
FB/120R/3A
C175
0.1uF
66
8.3. MSD3003_21x21_BGA
V+/V-
Enter/Menu
Menu lock
Burn-in
Button lock
Enter/CH+
CH+/CH-
V+/Menu Power lock
Factory
similar timing Menu/CH-
Combination key
Shieding Cover GND pin
System XTAL
H/W Reset
Transport Stream
I2C/ UART
SPI Flash
1. PM G PIO ?
PAD_GPIO_PM[6:0]
PAD_GPIO_PM[6], [5], [0] external interrupt
PAD_GPIO_PM[4] power con trol ( control LDO)
enable uart wake-up, PAD_GPIO_PM[1] uart_tx, PAD_GPIO_PM[5] uart_rx
Power Block
*100MHz, No any VIAhole!
IC Configuration Selection
DDR2-SDRAM Block
3.3V Power
Close to IC as close
as possible with wide
trace
Note: SAR & PM pin can't for WP control
Debug & ISP port
Int
VDDC 1.3V
Audio Block
Close to IC
SPI Flash
Boot Loader SPI Flash
GPIO Block
Video Block
Function Block
2.Standby mode , pin alive ?
==>Pin list: AVDD_MPLL, PAD_CEC, PAD_IRIN, PAD_GPIO_PMx7 , PAD_HSYNC0,
PAD_HSYNC1, PAD_VSYNC0, PAD_VSYNC1, PADA_XTAL_IN, PADA_XTAL_OUT,
PAD_RESET, PAD_SARx4
DDR2 Power
Close to IC
with wide trace
TDO
TDI
TMS
Placement Near MST.IC
DAC output Pad
SPI CZ p in
p in.
a. V8 (GPIO22)
b. D14 (I2S_IN_BCK)
c. U8 (GPIO23)
d. C14 (I2S_IN_WS)
e. P18 (GPIO51)
NTSCRF
HDCP KEY
I2C address
at A0.
Close to chip side
2
RESET
3
VCC
DIO/MA730
LM810M3-2.93V
1
GND
LVDS Block
CL=20pF; C0max=5pF
4M
relayout bypass cap link GND position from via to board side GND 081014
UART-TX
ADJ_PWM
TS_D[7:0]
SPI-CZ
SPI-SDI
SPI-SCK
SPI-SDO
SAR0
SAR1
AFTC-C
XTALO
IRIN
B5_RXEC-
G3_RXE0-
B3_RXE3-
B7_RXE2-
G2_RXE0+
B2_RXE3+
B6_RXE2+
B4_RXEC+
G1_RXE1-
B0_RXE4+
G0_RXE1+
B1_RXE4-
BRI_ADJ-PWM2-C
G5_RXO4-
R0_RXOC+
G6_RXO3+
G4_RXO4+
G7_RXO3-
R4_RXO1+
R1_RXOC-
R5_RXO1-
R6_RXO0+
R3_RXO2-
R7_RXO0-
R2_RXO2+
PWM0
PWM1
System-RST
TS_D1
TS_D0
TS_CLK
TS_D3
TS_SYNC
TS_D4
TS_VALID
TS_D5
TS_D6
TS_D7
TS_D2
OSDPOWERKEY
I2C-SDA
I2C-SCL
UART-RX
TUNER_CVBS
VCOM0
HDMI-CEC
HDMI0-CLKN
HDMI0-CLKP
HDMI0-RX0N
HDMI0-RX0P
HDMI0-RX1N
HDMI0-RX1P
HDMI1-HPDIN
HDMI1-SCL
HDMI0-HPDIN
HDMI1-RX0P
HDMI1-RX0N
VGA_BIN1+
HDMI0-SCL
HDMI0-RX2P
HDMI0-RX2N
HDMI1-SDA
HDMI1-RX1N
HDMI1-RX1P
HDMI0-SDA
HDMI1-RX2N
HDMI1-RX2P
HDMI1-CLKN
HDMI1-CLKP
HDMI2-SDA
HDMI2-CLKN
HDMI2-RX1N
HDMI2-CLKP
HDMI2-RX1P
HDMI2-RX0N
HDMI2-RX2N
HDMI2-RX0P
HDMI2-RX2P
S-Video0_Y
S-Video0_C
VGA_HSYNC1
VGA_RIN1+
PWM0
PWM1
VGA_VSYNC1
VGA_GIN1+
YPbPr_RIN0+
YPbPr_GIN0+
VCLP
REFP
REFM REFM
PM2
A_MDATA11
A_MCLKZ
A_MCLK
A_MDATA8
A_MDATA3
A_MDATA4
A_MDATA10
A_MDATA12
A_MDATA6
A_MDATA1
A_MDATA7
A_MDATA0
A_MDATA9
A_MDATA2
A_MDATA5
A_MDATA[15:0]
A_MADR11
A_WEZ
A_CKE
A_MADR12
A_MADR9
A_MADR5
A_MADR10
A_MADR1
A_BA0
A_BA1
A_MADR3
A_MADR7
A_ODT
A_MADR6
A_MADR0
A_MADR2
A_MADR4
A_MADR8
A_CASZ
A_RASZ
A_MADR[12:0]
A_MDDR_VREF
A_MDATA15
A_MDATA13
A_DQS0P
2ndReset
A_MDATA14
A_DQS1P
A_DQS1M
A_DQM1
A_DQS0M
A_DQM0
YPbPr_BIN0+
VCLP
CVBS1-RCA
REFP
SPI_CZ0
Demod_RST
PM5
LED
PM1
SPI_CZ0
SP_SDO SPI-SDO
SPI-CZ
SPI-SDI
SPI-SCK
FLASH_WPN-C
SPI_SDI
SPI_SCK
HDMI-WP
COMP1_AUL0
AUOutL_RCA
AUOutR_RCA
AU_DAC0_L
AU_DAC0_R
COMP1_AUR0
MUTE_S
RCA_AU_IN_3L
RCA_AU_IN_3R
PC_Audio-AUL1
PC_Audio-AUR1
LED_G
USB_OCD-C
LEDG
USB_OCD
POWER_SW
PM5
I2C-SDA
I2C-SCL
NAND_CE2-C
MUTE_S-C
RP_flash
LEDR
AFTC
System-RST
FLASH_WPN-C
MUTE_L
Panel_ON-P1
MUTE-L
Panel_ON-P1-C
VBLCTRL-P2-C
XTALI
OSDPOWERKEY
PWM3
2ndReset
TS_D[7:0]
ON_PBACK
A_MDATA[15:0]
A_MADR[12:0]
A_CASZ
A_RASZ
A_WEZ
A_CKE
A_ODT
A_BA1
A_BA0
A_MCLKZ
A_MCLK
A_DQM0
A_DQM1
A_DQS1M
A_DQS1P
A_DQS0M
A_DQS0P
HDMI1-SDA
HDMI1-SCL
HDMI2-CLKP
HDMI2-CLKN
HDMI2-RX0P
HDMI2-RX0N
HDMI2-RX1P
HDMI2-RX1N
HDMI2-RX2P
HDMI2-RX2N
HDMI2-SDA
HDMI0-SDA
HDMI0-SCL
HDMI-CEC
HDMI0-CLKP
HDMI0-CLKN
HDMI0-RX0P
HDMI0-RX0N
HDMI0-RX1P
HDMI0-RX1N
HDMI0-RX2P
HDMI0-RX2N
HDMI1-HPDIN
HDMI0-HPDIN
HDMI1-CLKP
HDMI1-CLKN
HDMI1-RX0P
HDMI1-RX0N
HDMI1-RX1P
HDMI1-RX1N
HDMI1-RX2P
HDMI1-RX2N
HDMI-WP
YPbPr_RIN0+
YPbPr_BIN0+
VGA_HSYNC1
YPbPr_GIN0+
VGA_VSYNC1
VGA_RIN1+
VGA_GIN1+
VGA_BIN1+
CVBS1-RCA
S-Video0_Y
S-Video0_C
TUNER_CVBS
VCOM0
SIFP
SIFM
COMP1_AUL0
COMP1_AUR0
PC_Audio-AUL1
PC_Audio-AUR1
RCA_AU_IN_3L
RCA_AU_IN_3R
AU_DAC0_L
AU_DAC0_R
AUOutL_RCA
AUOutR_RCA
SPDIF_OUT
USB0_DM
USB0_DP
AFTC
ADJ_PWM
TS_VALID
TS_SYNC
TS_CLK
R6_RXO0+
R7_RXO0-
R4_RXO1+
R5_RXO1-
R2_RXO2+
R3_RXO2-
G6_RXO3+
G7_RXO3-
R0_RXOC+
R1_RXOC-
G2_RXE0+
G3_RXE0-
G0_RXE1+
G1_RXE1-
B6_RXE2+
B7_RXE2-
B2_RXE3+
B3_RXE3-
B4_RXEC+
B5_RXEC-
I2C-SCL
I2C-SDA
UART-TX
UART-RX
USB_OCD
POWER_SW
ON_PBACK
MUTE_L
ON_PBACK
Panel_ON-P1
MUTE_S
OSDPOWERKEY
DCR
DCR
USB0_DP
USB0_DM
MUTE_L
MUTE_S
HDMI-WP
IRIN
SAR0
SAR1
LED-G
PM5
PM1
UART-RX
UART-TX
SPI_SCK
SP_SDO
FLASH_WPN
SPI_SDI
LED
LED_R
LED-R
HDMI2-HPDIN
HDMI2-HPDIN
HDMI2-SCL
HDMI2-SCL
AUVAG AUVAG
SIFM SIFM
AUSD_IN
AUSCK_IN
AUVRP AUVRPAUVRP
AUWS_IN
AUVRM AUVRM
SPDIF_OUT
SIFP SIFP
AUCOM AUCOM
2ndReset 3
TS_D[7:0] 3
ON_PBACK 2
A_MADR[12:0] 5
A_MDATA[15:0] 5
A_CASZ 5
A_RASZ 5
A_WEZ 5
A_CKE 5
A_ODT 5
A_BA1 5
A_BA0 5
A_MCLKZ 5
A_MCLK 5
A_DQM0 5
A_DQM1 5
A_DQS1M 5
A_DQS1P 5
A_DQS0M 5
A_DQS0P 5
HDMI1-SDA 8
HDMI1-SCL 8
HDMI2-CLKP 8
HDMI2-CLKN 8
HDMI2-RX0P 8
HDMI2-RX0N 8
HDMI2-RX1P 8
HDMI2-RX1N 8
HDMI2-RX2P 8
HDMI2-RX2N 8
HDMI2-SDA 8
HDMI0-SDA 8
HDMI0-SCL 8
HDMI-CEC 8
HDMI0-CLKP 8
HDMI0-CLKN 8
HDMI0-RX0P 8
HDMI0-RX0N 8
HDMI0-RX1P 8
HDMI0-RX1N 8
HDMI0-RX2P 8
HDMI0-RX2N 8
HDMI1-HPDIN 8
HDMI0-HPDIN 8
HDMI1-CLKP 8
HDMI1-CLKN 8
HDMI1-RX0P 8
HDMI1-RX0N 8
HDMI1-RX1P 8
HDMI1-RX1N 8
HDMI1-RX2P 8
HDMI1-RX2N 8
HDMI-WP 6
YPbPr_RIN0+ 7
YPbPr_GIN0+ 7
YPbPr_BIN0+ 7
VGA_HSYNC1 6
VGA_VSYNC1 6
VGA_RIN1+ 6
VGA_GIN1+ 6
VGA_BIN1+ 6
CVBS1-RCA 7
S-Video0_Y 7
S-Video0_C 7
TUNER_CVBS 3
VCOM0 3
SIFP 3
SIFM 3
COMP1_AUL0 7
COMP1_AUR0 7
PC_Audio-AUL1 9
PC_Audio-AUR1 9
RCA_AU_IN_3L 7
RCA_AU_IN_3R 7
AU_DAC0_L 10
AU_DAC0_R 10
AUOutL_RCA 9
AUOutR_RCA 9
SPDIF_OUT 9
USB0_DM 11
USB0_DP 11
AFTC 3
ADJ_PWM 2
TS_VALID 3
TS_SYNC 3
TS_CLK 3
R6_RXO0+ 11
R7_RXO0- 11
R4_RXO1+ 11
R5_RXO1- 11
R2_RXO2+ 11
R3_RXO2- 11
G6_RXO3+ 11
G7_RXO3- 11
R0_RXOC+ 11
R1_RXOC- 11
G2_RXE0+ 11
G3_RXE0- 11
G0_RXE1+ 11
G1_RXE1- 11
B6_RXE2+ 11
B7_RXE2- 11
B2_RXE3+ 11
B3_RXE3- 11
B4_RXEC+ 11
B5_RXEC- 11
I2C-SCL 3
I2C-SDA 3
UART-TX 6
UART-RX 6
USB_OCD 11
POWER_SW 2
MUTE_L 9
ON_PBACK 2
Panel_ON-P1 2
MUTE_S 9,10
OSDPOWERKEY
DCR 2
HDMI2-HPDIN 8
HDMI2-SCL 8
3.3V_STB
VDDP 3.3V_2
3.3V_2 3.3V_2
3.3V_STB
AVDD_33
3.3V_2 3.3V_2
3.3V_2
AVDD_DDR
VDDC
AVDD_AU
VDDP
3.3V_STB
3.3V_STB
3.3V_2
3.3V_STB
AVDD_USB
AVDD_MPLL
AVDD_USB
AVDD_DM
AVDD_MEMPLL
AVDD_DDR
AVDD_LPLL
AVDD_AU
3.3V_STB
AVDD_LPLL
5V_2 5V_2
3.3V_STB
AVDD_33
AVDD_DM
VDDC VCC1.3V
AVDD_DDR
VCC1.8V
AVDD_MPLL
3.3V_STB
3.3V_STB
AVDD_MEMPLL
3.3V_2
3.3V_2
AVDD_33
3.3V_STB
3.3V_STB
3.3V_STB
5V_STB
3.3V_2
5V_STB
3.3V_STB
C304
0.1uF
C227
0.1uF
R297
100/1%
R295
NC/1K
C273
0.1uF
R199
0R
R238 47
C239 47nF
R
208
10K
TP43
L118 0R
R224 1K
R236
75
C241
10uF/10V/Y5V
R256 47
R246
220K
TP38
C276
0.1uF
R211 0R
R296
1K
TP26
TP25
C228
0.1uF
AUSCK1 1
C297
0.1uF
C277
0.1uF
L128
FB/120R/3A
R298
1K
C290
0.1uF
C221 1uF
C296
0.1uF
C286
0.1uF
C278
0.1uF
R244 47
C219
0.1uF
C270
0.1uF
R520 10K/1%
R498
10K
R220 0R
R198
NC
AUSD1 1
C287
0.1uF
C256
0.1uF
TP41
R221 NC
R193 10K
C271
10uF/10V/Y5V
R242 47
R262 0R
C291
0.1uF
TP27
C264
0.1uF
R196 0R
C318
0.1uF
R232 47
C317
0.1uF
C279
0.1uF
TP19
R307
1K
C298
10uF/10V/Y5V
R239 1K
R210 0R
C275
0.1uF
R233 47
C226 1uF
C217
30pF
TP11
R299
NC/1K
C281
0.1uF
TP08
TP28
P102
Shieding Cover
1234
C321
0.1uF
C314
0.1uF
TP30
R223 NC
R230 47
C216
10uF/10V/Y5V
R510 0R
R231
220K
C220
1nF
C302
0.1uF
L123
FB/120R/3A
X102
12MHz
TP20
C268
0.1uF
R289 3.9K
R249
75
R285
10K
C285
0.1uF
L124
FB/120R/3A
R253 0R
TP17
R278
0R
R284
10K
R275 33
C263
0.1uF
C307
0.1uF
P105
S8B-PH
5
6
2
1
3
4
7
8
IRIN
IR5V
SAR0
POWER
SAR1
GND
LEDG
LEDR
C265
0.1uF
R291
4.7K
R240
220K
TP09
L119
FB/120R/3A
C253 47nF
R290
4.7K
TP22
C284
0.1uF
C313
0.1uF
C247 47nF
C295
0.1uF
C300
0.1uF
C236 47nF
Q113
2N3906
1
2
3
R229 47
TP34
+
C316
100uF/16V
R277 4.7K
C293
0.1uF
TP33
R215
1K/1%
R260
75
R270
4.7K
R259
75
C289
10uF/10V/Y5V
C319
0.1uF
C245
1nF
R237
75
AUDIO
I113C
MSD3003EG-LF-S7-21x21_BGA
Y1
Y2
J4
J5
K4
K5
L6
L4
L5
M6
M5
N6
N4
N5
V3
U3
W2
V2
W1
V1
M4
P5
P4
R4
B13
B11
C14
D14
A13
D13
C13
C12
E12
C10
SIF0P
SIF0M
AUL0
AUR0
AUL1
AUR1
AUL2
AUR2
AUL3
AUR3
AUL4
AUR4
AUL5
AUR5
AUOUTL0
AUOUTR0
AUOUTL1
AUOUTR1
AUOUTL2
AUOUTR2
AUCOM
AUVAG
AUVRP
AUVRM
SPDIFI
SPDIFO
I2S_IN_WS/GPIO67
I2S_IN_BCK/GPIO68
I2S_IN_SD
I2S_OUT_WS
I2S_OUT_MCK
I2S_OUT_BCK
I2S_OUT_SD
I2S_OUT_MUTE/UART1_RX
C244 47nF
R
207
N
C
/10K
TP15
AUWS1 1
C249 47nF
C218
30pF
C222 1uF
R287
1K
R247
75
R268 NC/0R
R288 470
L125
FB/120R/3A
R258 47
R294 100
C310
0.1uF
C301
0.1uF
R222 NC
R254
75
R266 0R
C288
0.1uF
C269
0.1uF
R274
0R
R212 0R
TP18
C235 47nF
L120
FB/120R/3A
C254 47nF
C259
0.1uF
C306
0.1uF
P104
B4B-PH
1
2
3
4
R194 NC
L122
FB/120R/3A
R204 NC
TP04
TP37
I117
24C04
1
2
3
4 5
6
7
8 A0
A1
A2
GND SDA
SCL
WP
VCC
TP12
C240
0.1uF
I113F
K9
K10
K11
K12
L9
L10
L11
L12
M9
M10
M11
M12
C5
D4
J15
G15
H15
F9
F10
F11
H9
H10
H11
H12
H13
N12
N13
N11
P15
J13
K13
L13
E15
E16
G16
F17
G17
H14
E7
F16
E9
P11
F13
F12
N10
N9
M13
N15
E8
E13
E14
P10
A7
J9
J10
J11
J12
F14
G14
L15
M15
K15
P6
R6
H6
F7
F8
H8
J8
K8
L8
M8
N8
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
AVDD_DDR
GND
VDDC
VDDC
VDDC
VDDC
VDDC
VDDC
VDDC
VDDC
VDDC
VDDC
VDDC
AVDD_LPLL
VDDP
VDDP
AVDD_DM
AVDD_DDR
AVDD_DDR
AVDD_DDR
VDDP
AVDD_DDR
AVDD_MEMPLL
AVDD_MPLL
VDDP
VDDC
VDDC
VDDP
VDDP
VDDP
VDDP
AVDD_DM
AVDD_LPLL
AVDD_MPLL
GND
GND
VDDC
GND
GND
GND
GND
GND
AVDD_USB
AVDD_USB
AVDD_PLLB_MLINK
AVDD_MLINK
AVDD_PLLA_MLINK
AVDD_AU
AVDD_AU
AVDD_33
AVDD_33
AVDD_33
AVDD_33
AVDD_33
AVDD_33
AVDD_33
AVDD_33
AVDD_33
R292
100
TP29
I116
MX25L3205DM2 I
1
2
3
4 5
6
7
8 CE#
SO
WP#
VSS SI
SCK
HOLD#
VDD
C272
0.1uF
C260
0.1uF
C294
0.1uF
R509 NC
TP44
R216 NC
TP40
C237
1nF
C232 47nF
C261
0.1uF
C230
0.1uF
TP14
C308
0.1uF
I114
NC/G690H308T73
1
2
3
GND
RESET
Vcc
C292
0.1uF
TP35
R500
10K
AUMCK1 1
C252 47nF
L126
FB/120R/3A
R206 NC
R519
10K/1%
R201 100
R219 10K
L121
FB/120R/3A
AUMUTE1 1
C303
0.1uF
TP13
R495 10K
R267 NC/0R
R276
10K
R195 1M
C283
0.1uF
C320
0.1uF
R213
1K/1%
C440
1nF
R218 0R
TP05
C234
0.1uF
Q112
2N3904
1
2
3
C282
0.1uF
TP42
R271 33
GPIO
I113E
B7
C7
D7
C6
D6
E6
E5
R17
T18
R15
R16
L16
K16
D10
A8
C8
T9
T10
R11
A11
A12
B12
D12
C11
E11
B10
D9
B9
GPIO134/PM0
GPIO135/PM1
GPIO136/PM2
GPIO137/PM3
GPIO138/PM4/POWER_SW
GPIO139/PM5/INT1
GPIO140/PM6/INT2
GPIO131/LDE/SPI_WPn1
GPIO130/LCK
GPIO133/LVSYNC/SPI_CZ1
GPIO132/LHSYNC/SPI_WPn
GPIO60/RX1
GPIO62/TX1
GPIO79/LVSYNC2/TX1
GPIO86/UART1_RX
GPIO87/UART1_TX
GPIO42
GPIO43
GPIO44
GPIO96
GPIO88
GPIO90
GPIO91
GPIO97
GPIO98
GPIO99
GPIO103
GPIO102
R235
75
L127
FB/120R/3A
C246 47nF
R243 1K
R293 100
C299
0.1uF
C257
10uF/10V/Y5V
C248 47nF
R241 47
R209 NC
R280
NC/4.7K
R225 392/1%
C251 47nF
C250
1nF
C439
1nF
C224 1uF
C305
0.1uF
TP03
D104
1N4148
C242
4.7uF/16V/Y5V
DDR2
I113A
C17
K19
B17
L19
A17
L18
C16
M19
B16
M20
L20
A16
M18
D16
D17
J18
J19
E17
J20
K20
K18
A18
A19
B19
H18
B18
H19
H20
A20
G20
B20
C20
F20
C19
G19
G18
C18
F19
D18
E20
F18
D19
D20
E18
E19
F15
A_MADR[0]
A_MADR[1]
A_MADR[2]
A_MADR[3]
A_MADR[4]
A_MADR[5]
A_MADR[6]
A_MADR[7]
A_MADR[8]
A_MADR[9]
A_MADR[10]
A_MADR[11]
A_MADR[12]
A_CASZ
A_RASZ
A_WEZ
A_MCLKE
A_ODT
A_BADR[1]
A_BADR[0]
NC
B_MCLKZ
B_MCLK
B_MDATA[0]
B_MDATA[1]
B_MDATA[2]
B_MDATA[3]
B_MDATA[4]
B_MDATA[5]
B_MDATA[6]
B_MDATA[7]
B_MDATA[8]
B_MDATA[9]
B_MDATA[10]
B_MDATA[11]
B_MDATA[12]
B_MDATA[13]
B_MDATA[14]
B_MDATA[15]
B_DDR2_DQM[0]
B_DDR2_DQM[1]
B_DDR2_DQSB[1]
B_DDR2_DQS[1]
B_DDR2_DQSB[0]
B_DDR2_DQS[0]
MVREF
R217 NC
TP23
TP31
C322
0.1uF
R300
10K
C315
NC
R248
75
R511 NC
TP36
C274
10uF/10V/Y5V
Q133
2N3904
1
2
3
C311
10uF/10V/Y5V
C243
1uF
R273 33
R205 10K
R200 NC
C223 1uF
R197 0R
C255
10uF/10V/Y5V
R226
220K
C266
0.1uF
R286
1K
R245 47
UART
LVDS
SAR
PWM
SPI
Parallel Flash
Parallel Flash
TS0
/USB_DP1
TS1
/USB_DM1
USB
GPIO/
I2C
I113D
D5
B5
A5
A4
C4
B4
U15
T15
U16
T16
A3
B3
Y13
W13
V13
V12
A6
B6
W12
Y12
Y4
W4
V4
U4
Y5
W5
V5
U5
T4
R5
T5
N16
M17
M16
V6
U8
V7
V8
U6
N17
N18
P17
P18
R10
T8
U11
V11
V10
Y6
V9
T6
W7
U10
T7
R9
Y7
R8
R7
U7
K17
L17
W6
U9
P16
T14
R12
U12
T13
T12
U14
U13
T11
J17
J16
H17
H16
A15
C15
B15
D15
A14
B14
E10
B8
D8
W17
Y17
Y16
V17
V16
W16
Y14
V15
V14
W14
W15
Y15
U19
U20
V20
U18
W20
Y20
Y18
V19
V18
W18
W19
Y19
A10
D11
T17
U17
F6
F5
C9
A9
HWRESET
SAR0
SAR1
SAR2
IRIN
SAR3
PWM0
PWM1
PWM2
PWM3
XOUT
XIN
SDI
SDO
SCZ
SCK
USB_DM
USB_DP
NC
NC
TS0DATA[0]
TS0DATA[1]
TS0DATA[2]
TS0DATA[3]
TS0DATA[4]
TS0DATA[5]
TS0DATA[6]
TS0DATA[7]
TS0VALID
TS0SYNC
TS0CLK
GPIO56/PF_D[0]
GPIO57/PF_D[1]
GPIO58/PF_D[2]
GPIO20/PF_D[3]
GPIO23/PF_D[6]
GPIO24/PF_D[7]
GPIO22/PF_D[5]
GPIO21/PF_D[4]
GPIO55/PF_AD[0]
GPIO54/PF_AD[1]
GPIO52/PF_AD[2]
GPIO51/PF_AD[3]
GPIO41/PF_AD[4]
GPIO39/PF_AD[5]
GPIO38/PF_AD[6]
GPIO37/PF_AD[7]
GPIO32/PF_AD[8]
GPIO30/PF_AD[9]
GPIO26/PF_AD[10]
GPIO28/PF_AD[11]
GPIO36/PF_AD[12]
GPIO33/PF_AD[13]
GPIO34/PF_AD[14]
GPIO40
GPIO35
NC
GPIO29
GPIO25
GPIO61
GPIO59
GPIO31
GPIO27
GPIO53
PF_OEZ
PF_WEZ
F_RBZ
PF_ALE
PF_CE0Z
PF_CE1Z
PF_AD[15]
NC
TS1_DATA
TS1_VALID
TS1_SYNC
TS1_CLK
GPIO89
GPIO93
GPIO92
GPIO94
GPIO95
GPIO100
GPIO101
GPIO104
GPIO105
LVA0P
LVA0M
LVA1P
LVA1M
LVA2P
LVA2M
LVA3P
LVA3M
LVA4P
LVA4M
LVACKP
LVACKM
LVB0P
LVB0M
LVB1P
LVB1M
LVB2P
LVB2M
LVB3P
LVB3M
LVB4P
LVB4M
LVBCKP
LVBCKM
UART2_TX
UART2_RX
DDCR_CK
DDCR_DA
DDCA_CK/UART0_RX
DDCA_DA/UART0_TX
GPIO85/UART2_TX
GPIO84/UART2_RX
TP10
C258
0.1uF
R494 10K
TP16
M-LINK
HDMI
Share VCOM0
RGB
CVBS1~3 IN
S-Video
CVBS0 IN
CVBS_OUT
I113B
E2
E1
F2
F1
G2
G1
H2
H1
G3
G4
F3
A2
A1
B2
B1
C2
C1
D2
D1
D3
E3
C3
W8
Y8
W9
Y9
W10
Y10
W11
Y11
R14
R13
P14
E4
T20
T19
R20
R19
P20
P19
N20
N19
R18
H3
H5
H4
F4
K6
J6
M1
M3
N2
L3
M2
N1
N3
G6
G5
K1
J3
J1
J2
T3
U1
T2
R3
T1
R1
R2
P3
P2
L1
K2
L2
K3
W3
Y3
U2
P1
RXACKP
RXACKN
RXA0P
RXA0N
RXA1P
RXA1N
RXA2P
RXA2N
DDCDA_DA
DDCDA_CK
HOTPLUGA
RXBCKP
RXBCKN
RXB0P
RXB0N
RXB1P
RXB1N
RXB2P
RXB2N
DDCDB_DA
DDCDB_CK
HOTPLUGB
RXCCKP
RXCCKN
RXC0P
RXC0N
RXC1P
RXC1N
RXC2P
RXC2N
DDCDC_DA
DDCDC_CK
HOTPLUGC
CEC
MLINKB-TXP
MLINKB-TXN
MLINKB-RXP
MLINKB-RXN
MLINKA-RX1P
MLINKA-RX1N
MLINKA-RX0P
MLINKA-RX0N
XTAL_OUT
VCLAMP
REFM
REFP
REXT
HSYNC0
VSYNC0
RIN0P
GIN0P
BIN0P
SOGIN0
RINM
GINM
BINM
HSYNC1
VSYNC1
RIN1P
GIN1P
BIN1P
SOGIN1
VSYNC2
RIN2P
GIN2P
BIN2P
SOGIN2
CVBS1
CVBS2
CVBS3
VCOM1
Y0(CVBS4)
C0(CVBS6)
Y1(CVBS5)
C1(CVBS7)
CVBS0
VCOM0
CVBSOUT0
CVBSOUT1
R303
1K
C238 47nF
TP21
C262
0.1uF
TP24
R263 NC/0R
R508 0R
R272 33
R264 NC/0R
R301 1K
R261 0R
C280
0.1uF
R234 47
TP39
C233 47nF
TP32 C229
NC/0.1uF
R499
NC
R227 47
C231
1nF
TP06
R228 1K
C312
0.1uF
TP07
R203
24K
R265 0R
C309
0.1uF
C225 1uF
R214 10K
R252 47
67
8.4. DDR2
Close to DDR2
Close to DDR2
Erton : EM68B16CWPA-25H
Elpida : EDE5116AJBG-8E-E
DDR2 32Mx16bit (64Mbye)
Close to MST IC
Close to MST IC
Close to DDR Power Pin
64MB: R323=>NC, R331=>NC, R330=>22 ohm
Close to MST IC
Close to DDR2
128MB: R323=>0 ohm, R331=>1K, R330=>NC
Zentel : A3R12E14JFF
A_MADR8
A_WEZ
A_CASZ
A_RASZ
A-MADR8
A-ODT
MVREF-1
A_MADR11
RASZM0
A_DQS1P
A-DQS0M
A-MADR0
A-MADR1
A-MADR2
A-MADR3
M0_CLK+
A_DQS1M
BA2
A-DQM0
A_MDATA[15:0]
A_DQS0M
M0_CLK-
M0-BA0
A_BA1
A_BA0
M0-BA1
A_DQM1
A-DQM1
A_DQM0
A-MADR11
CASZM0
A-MDATA15
A-MDATA14
A-MDATA13
A-MDATA12
A-DQS1M
M0-CKE
WEZM0
A-MDATA11
A-MDATA10
A-MDATA9
A-MDATA8
A_MCLKZ
A-DQS1P
A-MDATA7
A-MDATA6
A-MDATA5
A-MDATA4
A-MDATA3
A-MDATA2
A-MDATA1
A-MDATA0
A_CKE
A-MADR5
A-MADR6
A-MADR7
A-MADR8
A-MADR9
A-MADR10
A-MADR11
A-MADR12
A_MCLK
A-MADR4
A_DQS0P
A-DQS0P
A_ODT
MVREF-1
A_MADR[12:0]
A_MADR3
A_MADR7
A_MADR1
A_MADR10
A_MADR5
A_MADR9
A_MADR12
A_MADR6
A_MADR0
A_MADR2
A_MADR4
A-MADR9
A-MADR12
A-MADR3
A-MADR7
A-MADR1
A-MADR10
A-MADR5
A-MADR6
A-MADR4
A-MADR0
A-MADR2
A-MDATA6
A_MDATA3
A_MDATA1
A-MDATA3
A-MDATA1
A-MDATA4
A_MDATA6
A_MDATA4
A_MDATA0
A_MDATA7
A_MDATA2
A_MDATA5
A_MDATA10
A_MDATA13
A_MDATA15
A_MDATA8
A-MDATA10
A-MDATA8
A-MDATA15
A-MDATA13
A-MDATA2
A-MDATA0
A-MDATA7
A-MDATA5
A-MDATA11
A-MDATA9
A-MDATA14
A-MDATA12
A_MDATA9
A_MDATA11
A_MDATA14
A_MDATA12
A_DQS1P
A_DQS0M
A_DQS0P
A_MDATA[15:0]
A_MADR[12:0]
A_CASZ
A_RASZ
A_WEZ
A_CKE
A_ODT
A_BA1
A_BA0
A_MCLKZ
A_MCLK
A_DQM0
A_DQM1
A_DQS1M
A_MADR[12:0] 4
A_MDATA[15:0] 4
A_CASZ 4
A_RASZ 4
A_WEZ 4
A_CKE 4
A_ODT 4
A_BA1 4
A_BA0 4
A_MCLKZ 4
A_MCLK 4
A_DQM0 4
A_DQM1 4
A_DQS1M 4
A_DQS1P 4
A_DQS0M 4
A_DQS0P 4
DDR1.8V
DDR1.8V
DDR1.8V
VCC1.8V
DDR1.8V
DDR1.8V
DDR1.8V
R327 22
C337
0.1uF
C325
0.1uF
R329 22
R318 56
C342
0.1uF
R319 22
1
2
3
4
8
7
6
5 RP07 22x4
C324
0.1uF
1
2
3
4
8
7
6
5
RP08 56x4
R325 56
C341
0.1uF
C326
0.1uF
C340
0.1uF
R328 22
C332
10uF/10V/Y5V
C331
0.1uF
R320 NC/150
1
2
3
4
8
7
6
5 RP04 22x4
C328
0.1uF
R323 NC/0R
C335
0.1uF
R331 NC/1K
1
2
3
4
8
7
6
5
RP10 56x4
C344
1nF
R316 22
R313 56
C336
0.1uF
R324 56
C338
0.1uF
C339
0.1uF
R310
1K
C329
0.1uF
R314 56
C333
0.1uF
R311
1K
L129
0R
R312 56
R322 56
1
2
3
4
8
7
6
5
RP06 56x4
C330
0.1uF
R315 22
C327
0.1uF
R326 56
R317 56
C323
0.1uF
R321 22
1
2
3
4
8
7
6
5 RP05 22x4
C343
0.1uF
C334
0.1uF
R330 22
1
2
3
4
8
7
6
5
RP09 56x4
I118
EM68B16CWPA-25H
M8
M3
M7
N2
N8
N3
N7
P2
P8
P3
M2
P7
R2
L2
L3
J8
K8
K2
K
7
L
7
K
3
G8
G2
H7
H3
H1
H9
F1
F9
C8
C2
D7
D3
D1
D9
B1
B9
B7
A8
B3
F7
E8
L
8
F3
A
1
A
3
A
9
B
8
B
2
C
1
C
7
C
3
D
2
D
8
E
1
E
3
E
7
F
2
F
8
G
1
G
3
G
7
G
9
E
9
H
2
H
8
J
1
J
2
J
3
J
7
J
9
K
9
M
9
N
1
P
9
R
1
C
9
A
7
L1
A0
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
BA0
BA1
CK
CK
CKE
R
A
S
C
A
S
W
E
DQ0
DQ1
DQ2
DQ3
DQ4
DQ5
DQ6
DQ7
DQ8
DQ9
DQ10
DQ11
DQ12
DQ13
DQ14
DQ15
UDQS
UDQS
UDM
LDQS
LDQS
C
S
LDM
V
D
D
V
S
S
V
D
D
Q
V
S
S
Q
V
S
S
Q
V
D
D
Q
V
D
D
Q
V
D
D
Q
V
S
S
Q
V
S
S
Q
V
D
D
V
S
S
V
S
S
Q
V
S
S
Q
V
S
S
Q
V
D
D
Q
V
D
D
Q
V
D
D
Q
V
D
D
Q
V
D
D
Q
V
S
S
Q
V
S
S
Q
V
D
D
L
V
R
E
F
V
S
S
V
S
S
D
L
V
D
D
O
D
T
V
D
D
V
S
S
V
S
S
V
D
D
V
D
D
Q
V
S
S
Q
BA2
68
8.5. VGA
R-
G-
B-
Close to MST. IC
To 75 ohm GND
R
G
B
DDC_SCL_D
VGA5V
VGA_RIN1+
VGA5V
VGA-SDA
V
G
A
_
H
S
Y
N
C
VGA_HSYNC1
VGA_BIN1+
VGA_GIN1+
UART-RX
VGA-TX
VGA-RX
UART-TX
VGA-TX
VGA-RX
DDC_SDA_D
HDMI-WP
VGA-SCL
UART-RX
UART-TX
V
G
A
_
V
S
Y
N
C
VGA_VSYNC1
VGA_HSYNC1
VGA_VSYNC1
VGA_RIN1+
VGA_GIN1+
VGA_BIN1+
HDMI-WP
WP
WP
UART-RX 4
UART-TX 4
VGA_HSYNC1 4
VGA_VSYNC1 4
VGA_RIN1+ 4
VGA_GIN1+ 4
VGA_BIN1+ 4
HDMI-WP 4
WP 8
5V_STB
5V_STB
D109
ESD4.7p
R341 NC
P106
DSUB-15/10mm
1
6
2
7
3
8
4
9
5
11
12
13
14
15
10 16
1
7
D108
ESD4.7p
R345
10K
D113
ESD4.7p
R497 NC
D111
ESD4.7p
R346 100
R333 100
D106
ESD4.7p
R336
2.4K
R335
510
R343 100
R344 100
Q114
2N3904
1
2
3
D105
ESD4.7p
D110
ESD4.7p
C345
0.1uF
D112
ESD4.7p
R340 NC
R337
10K
R339
4.7K
I119
24C02
1
2
3
4 5
6
7
8
NC
NC
NC
GND SDA
SCL
WP
VCC
R348
4.7K
R342 100
R496 NC
R332 100
D107
ESD4.7p
R338
4.7K
D115
BAT54C
D114
ESD4.7p
R334
510
69
8.6. Video_Interface
YPbPr Input
YPbPr/DVI Audio In
Close to connector
AV & SV Input
Keep A_GND trace with Signal.
Keep Spacing for L/R cahnnel.
Keep trace width(12mil+).
Close to connector
Keep A_GND trace with Signal.
Keep Spacing for L/R cahnnel.
Keep trace width(12mil+).
Close to connector
YPbPr_GIN0+
AV-AUL1
RCA_AU_IN_3R
RCA_AU_IN_3L
COMP1_AUR0
COMP1_AUL0 COMP-AUL0
COMP-AUR0
YPbPr_RIN0+
YPbPr_BIN0+
YPbPr_GIN0+
CVBS1-RCA
S-Video0_Y
S-Video0_C
COMP1_AUR0
RCA_AU_IN_3R
COMP1_AUL0
RCA_AU_IN_3L
AV-AUR1
SV-Y
SV-C S-Video0_C
S-Video0_Y
CVBS1-RCA
AV
YPbPr_BIN0+
YPbPr_RIN0+
YPbPr_RIN0+ 4
YPbPr_GIN0+ 4
YPbPr_BIN0+ 4
CVBS1-RCA 4
S-Video0_Y 4
S-Video0_C 4
COMP1_AUR0 4
COMP1_AUL0 4
RCA_AU_IN_3R 4
RCA_AU_IN_3L 4
D121
NC/ESD4.7p
C353
NC/330pF
D123
NC/ESD4.7p
C352
NC
R362
12K
R358
18K
R356
12K
D118
NC/ESD4.7p
C357
330pF
C358
560pF
P108
RCA1X3_AV
3
4
1
5
6
8
9
12
11
13
10
14
C354
NC/330pF
L130
0R
D119
NC/ESD4.7p
D117
NC/ESD4.7p
C347
NC/330pF
R359
12K
R361
18K
C355
330pF
D116
NC/ESD4.7p
D120
NC/ESD4.7p
C361
330pF
C348
NC/330pF
C349
NC/330pF
L132
0R
L131
0R
R355
18K
C350
NC
R357
18K
C356
560pF
C359
330pF
C346
NC/330pF
D125
NC/ESD4.7p
D122
NC/ESD4.7p
C360
560pF
D124
NC/ESD4.7p
C351
NC
P107
RCA1X5_YPbPr
8
5
1
6
3
4
2
7
9
10
C362
560pF
R360
12K
70
8.7. HDMI interface
close to chip
To MST IC From HDMI connector
For CEC Leakage Protect
DDC EEPROM
HDMI2 Connector
HDMI1 Connector
Hot-Plug Control
DDC EEPROM
HDMI3 Connector
Hot-Plug Control
DDC EEPROM
Hot-Plug Control
HDMI1_CLKP
HDMI-CEC
HDMI1_CEC
HDMI0_CEC
HDMI0-RX1P
HDMI0-RX2N
HDMI0-RX1N
HDMI0-RX2P
HDMI0-RX0N
HDMI0-RX0P
HDMI0_CLKN
HDMI1_RX1P
HDMI0_CLKP
HDMI2-SDA
HDMI2-SCL
HDMI0_RX2N
HDMI2_SCL
HDMI2_SDA
HDMI-2-SCL
HDMI-2-SDA
WP
HDMI0_RX2P
HDMI0-CLKN
HDMI0-CLKP
HDMI0-5V
HDMI-0-SCL
HDMI0_RX1P
HDMI0_RX1N
HDMI0_HPDIN
HDMI0_RX0N
HDMI0_CEC
HDMI1-RX1P
HDMI1-RX2N
HDMI1-RX1N
HDMI1-RX2P
HDMI1-RX0N
HDMI1-RX0P
HDMI0_RX0P
HDMI1-CLKN
HDMI1-CLKP
HDMI1-5V
HDMI-1-SCL
HDMI-1-SDA
HDMI1_RX0N
HDMI1_RX2N
HDMI1-HPDIN
HDMI1_HPDIN
HDMI0-HPDIN
HDMI0_HPDIN
HDMI1_RX0P
HDMI1_CEC
HDMI2-RX1P
HDMI2-RX2N
HDMI2-RX1N
HDMI2-RX2P
HDMI2-RX0N
HDMI2-RX0P
HDMI2-CLKN
HDMI2-CLKP
HDMI1-SDA
HDMI1-SCL
HDMI2-5V
HDMI-2-SCL
HDMI-2-SDA
HDMI1_SCL
HDMI2_RX1N
HDMI2_RX0N
HDMI1_SDA
HDMI-1-SCL
HDMI-1-SDA
HDMI2_HPDIN
WP
HDMI2_CLKN
HDMI2_RX2P
HDMI2_CEC
HDMI1_HPDIN
HDMI0-SDA
HDMI0-SCL
HDMI2_CLKP
HDMI0_SCL
HDMI0_SDA
HDMI-0-SCL
HDMI-0-SDA
WP
HDMI2_RX2N
HDMI2_RX1P
HDMI2_CEC
HDMI2-HPDIN
HDMI2_HPDIN
HDMI2_RX0P
HDMI-0-SDA
HDMI1_CLKN
HDMI1-SDA
HDMI1-SCL
HDMI2-CLKP
HDMI2-CLKN
HDMI2-RX0P
HDMI2-RX0N
HDMI2-RX1P
HDMI2-RX1N
HDMI2-RX2P
HDMI2-RX2N
HDMI2-SDA
HDMI2-SCL
HDMI0-SDA
HDMI0-SCL
HDMI2-HPDIN
HDMI-CEC
HDMI0-CLKN
HDMI0-CLKP
HDMI0-RX0P
HDMI0-RX0N
HDMI0-RX1P
HDMI0-RX1N
HDMI0-RX2P
HDMI0-RX2N
HDMI1-HPDIN
HDMI0-HPDIN
HDMI1-CLKP
HDMI1-CLKN
HDMI1-RX0P
HDMI1-RX0N
HDMI1-RX1P
HDMI1-RX1N
HDMI1-RX2P
HDMI1-RX2N
WP
HDMI1_CLKP
HDMI1_CLKN
HDMI1_RX0N
HDMI1_RX0P
HDMI1_RX2P
HDMI1_RX1P
HDMI1_RX1N
HDMI1_RX2N
HDMI0_CLKP
HDMI0_CLKN
HDMI0_RX0N
HDMI0_RX0P
HDMI0_RX2P
HDMI0_RX1P
HDMI0_RX1N
HDMI0_RX2N
HDMI2_CLKP
HDMI2_CLKN
HDMI2_RX0N
HDMI2_RX0P
HDMI2_RX2P
HDMI2_RX1P
HDMI2_RX1N
HDMI2_RX2N
HDMI1_RX1N
HDMI1_RX2P
HDMI0-CLKP 4
HDMI0-CLKN 4
HDMI0-RX0P 4
HDMI0-RX0N 4
HDMI0-RX1P 4
HDMI0-RX1N 4
HDMI0-RX2P 4
HDMI0-RX2N 4
HDMI0-SDA 4
HDMI0-SCL 4
HDMI0-HPDIN 4
HDMI1-CLKP 4
HDMI1-CLKN 4
HDMI1-RX0P 4
HDMI1-RX0N 4
HDMI1-RX1P 4
HDMI1-RX1N 4
HDMI1-RX2P 4
HDMI1-RX2N 4
HDMI1-SDA 4
HDMI1-SCL 4
HDMI1-HPDIN 4
HDMI2-CLKP 4
HDMI2-CLKN 4
HDMI2-RX0P 4
HDMI2-RX0N 4
HDMI2-RX1P 4
HDMI2-RX1N 4
HDMI2-RX2P 4
HDMI2-RX2N 4
HDMI2-SDA 4
HDMI2-SCL 4
HDMI2-HPDIN 4
HDMI-CEC 4
WP 6
5V_STB
HDMI2_VCC
HDMI2-5V
HDMI0-5V
HDMI1-5V
HDMI1-5V
HDMI0-5V
5V_STB
HDMI1_VCC
HDMI1-5V
HDMI2-5V
5V_STB
HDMI0_VCC
HDMI0-5V
HDMI2-5V
5V_STB
5V_STB
5V_STB
R377
1K
C364
0.1uF
R385 100
I124
NC/IP4280CZ10
1
2
3
4
5 6
7
8
9
10
D2+
NC
VDD
D1+
NC D1-
NC
GND
D2-
NC
R374 4R7
Q122
2N3904
1
2
3
R389 4R7
R375 4R7
R412 10
R382
47K
I126
NC/IP4280CZ10
1
2
3
4
5 6
7
8
9
10
D2+
NC
VDD
D1+
NC D1-
NC
GND
D2-
NC
I120
NC/IP4280CZ10
1
2
3
4
5 6
7
8
9
10
D2+
NC
VDD
D1+
NC D1-
NC
GND
D2-
NC
I128
24C02
1
2
3
4 5
6
7
8
NC
NC
NC
GND SDA
SCL
WP
VCC
R395 4R7
R381
10K
R369 4R7
D130
NC/ESD4.7p
R397 4R7
R390 4R7
R364
47K
I121
NC/IP4280CZ10
1
2
3
4
5 6
7
8
9
10
D2+
NC
VDD
D1+
NC D1-
NC
GND
D2-
NC
R367 100
R386 100
R378 4R7
D134
NC/ESD4.7p
P109
HDMI 19P
3
1
5
15
16
6
4
2
18
17
19
9
7
8
11
10
12
13
20
21
22
DAT2-
DAT2+
Dat1 shield
DDC SCL
DDC SDA
DAT1-
DAT1+
Dat2 shield
+5V
CEC/DDC GND
HPD
DAT0-
DAT0+
Dat0 shield
clk shield
clk+
clk-
CEC
SHIELD
SHIELD
SHIELD
R399
10K
D131
BAT54C
R371 4R7
R409 10
R398
4.7K
D137
NC/ESD4.7p
I127
NC/IP4280CZ10
1
2
3
4
5 6
7
8
9
10
D2+
NC
VDD
D1+
NC D1-
NC
GND
D2-
NC
D132
NC/ESD4.7p
R392 4R7
R396 4R7
P111
HDMI TYPE-A
3
1
5
15
16
6
4
2
18
17
19
9
7
8
11
10
12
13
20
21
22
23
DAT2-
DAT2+
Dat1 shield
DDC SCL
DDC SDA
DAT1-
DAT1+
Dat2 shield
+5V
CEC/DDC GND
HPD
DAT0-
DAT0+
Dat0 shield
clk shield
clk+
clk-
CEC
SHIELD
SHIELD
SHIELD
SHIELD
R408 10
D128
NC/ESD4.7p
R372 4R7
D138
NC/ESD4.7p
R407 10
I125
24C02
1
2
3
4 5
6
7
8
NC
NC
NC
GND SDA
SCL
WP
VCC
R417 0R
R393 4R7
R405 100
I123
NC/IP4280CZ10
1
2
3
4
5 6
7
8
9
10
D2+
NC
VDD
D1+
NC D1-
NC
GND
D2-
NC
I122
24C02
1
2
3
4 5
6
7
8
NC
NC
NC
GND SDA
SCL
WP
VCC
R394
1K
R418 0R
R416
4.7K
R402 100
D133
NC/ESD4.7p
R401
47K
R366 100
D136
BAT54C
R379 4R7
R368 100
R413 10
D135
NC/ESD4.7p
R404 100
R380
4.7K
R387 4R7
R400
47K
C365
0.1uF
R415 10
R410
1K
Q120
2N3904
1
2
3
R419 0R
R388 100
R414 10
R420
200
D127
NC/ESD4.7p
D139
NC/ESD4.7p
D140
NC/ESD4.7p
C363
0.1uF
R363
10K
R365
47K
R383
47K
R370 100
R411 10
D126
BAT54C
R376 4R7
Q118
2N3904
1
2
3
P110
HDMI 19P
3
1
5
15
16
6
4
2
18
17
19
9
7
8
11
10
12
13
20
21
22
DAT2-
DAT2+
Dat1 shield
DDC SCL
DDC SDA
DAT1-
DAT1+
Dat2 shield
+5V
CEC/DDC GND
HPD
DAT0-
DAT0+
Dat0 shield
clk shield
clk+
clk-
CEC
SHIELD
SHIELD
SHIELD
R384 100
R403 100
D129
NC/ESD4.7p
71
8.8. Audio Interface
PC Audio input
Location near phone jack
RCA OUT
Placement Near SPDIF
Blue
pin 2,3 NC
pin 4,5 NC
Headphone output
Green
pin 2,4 NC
pin 3,5 NC
SPDIF OUT
HI ENABLE
PC_Audio-AUL1
PC_Audio-AUR1
SPDIF_OUT
MUTE_L
SPDIF_OUT
PHONE_R
PHONE_L
PHONE_DET
PHONE_DET
AUOutR_RCA
AUOutL_RCA
PC_Audio-AUR1
PC_Audio-AUL1
AUOutR_RCA
AUOutL_RCA
MUTE_S
MUTE_S
PHONE_L
PHONE_R
AU_OUT_R
AU_OUT_L
MUTE_L
MUTE_L
SPDIF_OUT 4
MUTE_L 4
PHONE_R 10
PHONE_L 10
PHONE_DET 10
PC_Audio-AUR1 4
PC_Audio-AUL1 4
AUOutR_RCA 4
AUOutL_RCA 4
MUTE_S 4,10
AVREF2
VAF2
AVREF2
VAF2
5V_2
VAF2
5V_STB
3.3V_2
VAF2
VAF2
3.3V_STB
AVREF2
5V_2
VAF2
5V_STB
C377
22pF
R431 82K
R442
15K
R430 1K/NC
R438
10K
C382
0.1uF
R427
1K
R421
18K
R429 1K/NC
C383
10uF/10V/Y5V
R433
15K
C441
10uF/10V/Y5V/NC
C369
560pF
C385
1uF
R426
1K
+
C373
47uF/16V
R309
0R
R512
1K/NC
L147
FB/600R/1.5A/NC
R435
1K/NC
D143
NC/ESD4.7p
R308
0R
D142
NC/ESD4.7p
R437
1K/NC
C375
330pF
R440 82K
R514
0R
+
-
I129B
LM358
5
6
7
8
4
C376
NC/1uF
R521
10K/NC
Q124
2N3906/NC
1
2 3
P115
RCA1X2_Audio
4
1
3
2
+
-
I129A
LM358
3
2
1
8
4
Q125
2N3904/NC
1
3
2
C368
560pF
R434
6.8K
R425 10K
R423
12K
R517
1K
Q123
2N3906/NC
1
2 3
R439
10K
R422
18K
R428
100
R441
7.5K
Q106
2N3904/NC
1
3
2
C381
0.1uF
P113
PHONE_JACK
5
4
3
1
2
S
G
D
S O T
2 3
Q115
AP2305
1
3
2
R432
7.5K
L146
FB/600R/1.5A
R304
100K
C135
0.1uF/NC
+
C370
47uF/16V
R445
1.5K
R446
1K/NC
R443
6.8K
R515
0R
L133
FB/600R/1.5A
C442
10uF/10V/Y5V/NC
R513
1K/NC
P112
PC_AUDIO IN JACK
2
4
5
1
3
E
B
C
SOT
23
Q116
MMBT3904
1
3
2
P114
S/PDIF OUT
1
2
3
4
5
VCC
IN
GND
N
C
N
C
R305 10K
C366
330pF
C384
10uF/10V/Y5V
C379
1uF
D141
NC/ESD4.7p
L134
FB/600R/1.5A/NC
C372
0.1uF
C374
330pF
C371
10uF/10V/Y5V
R424
12K
R306
10K
R516
1K
Q126
2N3904/NC
1
3
2
R444
1K/NC
C367
330pF
C378
10uF/10V/Y5V
R436
1.5K
72
8.9. Audio Amp. Interface
Audio Pre-Amplifier
Gain
32dB
L , L
H , H
20dB
L , H 26dB
36dB
H , L
GAIN[1:0]
SD LOW==>> SHUT DOWN
SD HI ==>> AMP WORKS
AC OFF no pop noise
L WORK
SHUTDOWN
MUTE_S
H
PVDD2
PVDD1
GVDD
AU_DAC0_L
GAIN0
GAIN1
AU_DAC0_R
GAIN0
GAIN1
/SD
Lout-
Lout+
Rout+
Rout-
/SD
MUTE_S
AU_DAC0_R
PHONE_R
PHONE_L
EAR_MUTE
AU_DAC0_L
PHONE_R
PHONE_L
PHONE_DET
PHONE_DET
MUTE_N
PHONE_R
PHONE_L
MUTE_S
MUTE_N
E
A
R
_
M
U
T
E
TU_PW_CON
TU_PW_CON
AU_DAC0_L
AU_DAC0_R
MUTE_S 4,9
PHONE_R 9
PHONE_L 9
PHONE_DET 9
PHONE_R 9
PHONE_L 9
TU_PW_CON 2
AU_DAC0_L 4
AU_DAC0_R 4
+12V_AMP
+12V_AMP
+12V_AMP
GVDD
5V_2
5V_STB
5V_2
5V_2
5V_STB
C391
0.1uF
R469
22K
L143
22uH
R462
10K
L140
FB/80R/6A
L137
22uH
C423
1uF
C417
1nF
C416
0.1uF
Q131
2N3904
1
3
2
C388
0.22uF/100V
C387
0.1uF
D144
1N4148
1 2
R459 10K/1%
C407 1uF
C389
0.1uF
Q129
2N3904
3
1
2
R
4
4
9
1
0
K
C424
330pF
I131
TPA6113A2
3
4
5
6
7
8
1
2
BYPASS
GND
SHUTDOWN
IN2-
VO2
VDD
VO1
IN1-
C418
NC
R458 10
L136
FB/80R/6A
I130 TPA3113D2
1
2
13
11
12
14
28
26
27
25
24
23
22
21
20
19
18
17
16
15
3
4
5
6
7
8
9
2
9
10
/SD
/FAULT
NC
RINN
RINP
PBTL
PVCCL
BSPL
PVCCL
OUTPL
PGND
OUTNL
BSNL
BSNR
OUTNR
PGND
OUTPR
BSPR
PVCCR
PVCCR
LINP
LINN
GAIN0
GAIN1
AVCC
AGND
GVDD
P
O
W
E
R
P
A
D
PLIMIT
C404 1uF
R450 1K
D148
1N4148
1 2
L141
22uH
R474
24K
C422
1uF
R461
11K/1%
R460 10
D146
1N4148
1
2
C394
1nF
R466
10K
+
C390
100uF/16V
L138
FB/80R/6A
R451 1K
L144
FB/80R/6A
R
4
5
2
1
0
K
Q128
2N3904
1
3
2
C398 1uF
C399 1nF C400
330pF
C414
1uF
R457 10
C395
0.22uF
C412
0.22uF/100V
L142
FB/80R/6A
C409
330pF
R
4
4
8
N
C
D145
1N4148
1 2
Q130
2N3904
3
1
2
C421
330pF
C408 1nF
P116
S4B-XH
1
2
3
4
R+
R-
L+
L-
R456 10
C402
0.22uF
D100
1N4148
1 2
C411
0.1uF
+
C415 470uF/16V/LowESR
L145
FB/120R/3A
R455 10
R447
47K
D147
1N4148
1 2
R468
22K
C420
1uF
L139
FB/80R/6A
R463
10K
R465
1K
R471
NC
C410
0.22uF
L135
22uH
+ C386
470uF/16V/LowESR
C403 1uF
R473
47K
R472
NC
C396 1uF
Q127
2N3906
1
2
3
+ C392
470uF/16V/LowESR
C425
1uF
C393
0.1uF
C413
0.1uF
C397 1nF
R467
24K
R454
100K
C405
0.22uF
C401 4.7uF/16V/Y5V
R
4
5
3
N
C
R464 10K
R470
100K
C406 1nF
D149
1N4148
1 2
73
8.10. Panel/USB Interface
LVDS PANEL
LVDS Panel ( Header Type )
CMO M270H1-L01:
R494 NC
R493 0R
USB Host Interface
R6_RXO0+
R4_RXO1+
G2_RXE0+
G7_RXO3-
G0_RXE1+
B5_RXEC- B6_RXE2+
G3_RXE0-
B3_RXE3-
B7_RXE2-
B2_RXE3+
R5_RXO1-
27
USB_OCD
USB0_DP
USB0_DM
VBUS5V
USB_OCD
USB0_DM
USB0_DP
OSDPOWERKEY
26
B4_RXEC+
G1_RXE1-
G6_RXO3+
R0_RXOC+
R3_RXO2-
R7_RXO0-
R1_RXOC-
R2_RXO2+
R6_RXO0+
R7_RXO0-
R4_RXO1+
R5_RXO1-
R2_RXO2+
G6_RXO3+
G7_RXO3-
R0_RXOC+
R1_RXOC-
G2_RXE0+
G3_RXE0-
G0_RXE1+
G1_RXE1-
B6_RXE2+
B7_RXE2-
B2_RXE3+
B3_RXE3-
B4_RXEC+
B5_RXEC-
R3_RXO2-
R6_RXO0+
R4_RXO1+
R2_RXO2+
G7_RXO3-
G0_RXE1+
B5_RXEC-
G3_RXE0-
B3_RXE3-
R1_RXOC-
B7_RXE2-
R7_RXO0-
G2_RXE0+
R3_RXO2-
G6_RXO3+
G1_RXE1-
B6_RXE2+
R0_RXOC+
B4_RXEC+
B2_RXE3+
R5_RXO1-
PANEL-VCC
27
26
USB_OCD 4
USB0_DM 4
USB0_DP 4
OSDPOWERKEY 4
G2_RXE0+ 4
G3_RXE0- 4
G0_RXE1+ 4
G1_RXE1- 4
B6_RXE2+ 4
B7_RXE2- 4
B2_RXE3+ 4
B3_RXE3- 4
B4_RXEC+ 4
B5_RXEC- 4
R6_RXO0+ 4
R7_RXO0- 4
R4_RXO1+ 4
R5_RXO1- 4
R2_RXO2+ 4
G6_RXO3+ 4
R3_RXO2- 4
G7_RXO3- 4
R0_RXOC+ 4
R1_RXOC- 4
PANEL-VCC
5V_2
D151
NC/ESD4.7p
+
C426
47uF/16V
F101
1.5A/63V
R479 0R
P119
USB-AVM
1
2
3
4
5
6
VBUS
D-
D+
GND
SHELL
SHELL
C427
0.1uF
R478 NC/0R
R475
51K
R476
100K
P118
NC/CON 2X15 1mm
1 2
3 4
5 6
7 8
9 10
11 12
13 14
15 16
17 18
19 20
21 22
23 24
25 26
27
29
28
30
D150
NC/ESD4.7p
P117
CON 2X15 2mm
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
R477 0R
R480 0R C429
0.1uF
74
9. PCB Layout Diagrams
9.1. MAIN PCB TOP VIEW
75
9.2. MAIN PCB BOTTOM VIEW
76
9.3. KEYPAD PCB TOP VIEW
9.4. KEYPAD PCB BOTTOM VIEW
77
9.5. IR PCB TOP VIEW
9.6. IR PCB BOTTOM VIEW
78
9.7. POWER PCB TOP VIEW
79
9.8. POWER PCB BOTTOM VIEW
80
10. Exploded View And Exploded Parts List
81
82
Item ViewSonic P/N Ref. P/N Q'ty
1 NA 2024291102P-01 FRONT BEZEL VT2730 ABS94HB G.L BLACK 1
2 NA 2044275801P FUNCTION KEY JC279E ABS94HB G.L BLACK 1
3 C-00010085 2022288602P-01 CABI BACK JC279E UA ABS94HB G.L BLACK 1
4 NA 2028269001P STAND VT2730 ABS94HB G.L BLACK 1
5 NA 2028562601P NECK JC279U ABS94HB G.L BLACK 1
6 NA 2106665900P HINGE JC279E U NECK HINGE 0~20 50kg -CM (H.Y.) 1
7 NA 2086240142P SCREW P SW+ M4*14mm PSW+2N 4
8 NA 2039820800P FOOT PAD 20*3.0T SQUARE GRAIN BLK 4
9 NA 2071685402P SHIELD PLATE JC279E 61UA SECC 0.6T 1
10 NA 2072055902P METAL FITTG-I/O JC279E 61UA SIDE IO SECC 0.6T 1
11 NA 2054155802P ORNAMENT JC279E 61UA SIDE IO PC 0.5T ADHESIVE 1
12 M-SCW-0824- 2080003700P SCREW SPE ISZZTER001A M3*6L MSWR17/FZMYI 4
13 M-SCW-0824- 2080003700P SCREW SPE ISZZTER001A M3*6L MSWR17/FZMYI 2
14 HW-00008083 2082630082P SCREW M3X8 P=0.5 2
15 NA 2082630084P SCREW M3X8 P=0.5 BLACK 1
16 NA 2084730084P SCREW BND T+ M3X8(BND T+) (BLK) 1
20 NA 2084740084P SCREW BND T+ SCREW BNDT+ M4*8(BND T+) BLACK 2
22 C-00010086 2027276001P DUST COVER JC279E HINGE COVER ABS94HB G.L BLACK 1
23 M-SCW-0824- 2084730082P SCREW BND T+ M3X8(BND T+) 1
24 NA 2071898500P BRACKET FIX JC279E HINGE SUPPORT SECC 1.0T 2
25 HW-00008083 2082630082P SCREW M3X8 P=0.5 2
26 HW-00008160 2084740082P SCREW BND T+ M4X8(BND T+) 2
27 CB-00009349 2427404107P WIRE 4/2+2P H/A 1007#24+CORE L=430mm 1
27 CB-00009350 2427404107T WIRE 4/2+2P H/A 1007#24+CORE L=430mm 1
28 CB-00009351 2427430085P WIRE 30/30P H/H 1571#28 L=220mm 1
28 CB-00009352 2427430085T WIRE 30/30P H/H 1571#28 L=220mm 1
29 CB-00009353 2427408083P WIRE 8/8P H/H 1061#26 L=610mm 1
29 CB-00009354 2427408083T WIRE 8/8P H/H 1061#26 L=610mm 1
30 CB-00009355 2427412049P WIRE 12/12P H/H 1061#26 L=220mm 1
30 CB-00009356 2427412049T WIRE 12/12P H/H 1061#26 L=220mm 1
31 NA 2391310065P-01 SPEAKER 10W/6ohm (R) D.L 1
31 NA 2391310065P-06 SPEAKER 10W/6ohm (R) UDID (161673320020) 1
32 NA 2391310066P-01 SPEAKER 10W/6ohm (L) D.L 1
32 NA 2391310066P-06 SPEAKER 10W/6ohm (L) UDID (161673320010) 1
Rev:1a
EXPLODED PARTS LIST (VT2730-M)
Description
ViewSonic Model Number: VS13154-1M
83
Rev: 1a
Serial No. Prefix: RUB
Item Category Part Name Description ECR/ECN ViewSonic P/N Ref. P/N Ref. NO Compatibility Location Universal number#
1 Remote Controller ViewSonic 35-key ATSC Remote (PHILIPS RC5 Code) A-00008696 2419200272P H901
2 Power Cord USA WALL 1.83M BLACK A-00005362 2427130046P P951
3 Main Board PCB ASS'Y BLOCK (MAIN) B-00010159 6201-7027003001 201
4 Main Board PCB ASS'Y BLOCK (CON) B-00010160 6202-7027003001 202
5 Power Board PCB ASS'Y BLOCK (POWER) B-00010161 6204-7027376101 204
6 IR Board PCB ASS'Y BLOCK (IR) B-00010162 6206-7027003001 206
7 Front Bezel VT2730 ABS94HB G.L BLACK C-00010084 2603309557 26033
8 Back Cover JC279E UA ABS94HB G.L BLACK C-00010085 2022288602P-01 2C01
9 Dust Cover JC279E HINGE COVER ABS94HB G.L BLACK C-00010086 2027276001P 6B04
10 Wire 5/5P H/H 1007#26 L=330mm CB-00009347 2427405024P P703
11 Wire 5/5P H/H 1007#26 L=330mm CB-00009348 2427405024T P703
12 Wire 4/2+2P H/A 1007#24+CORE L=430mm CB-00009349 2427404107P P704
13 Wire 4/2+2P H/A 1007#24+CORE L=430mm CB-00009350 2427404107T P704
14 Wire 30/30P H/H 1571#28 L=220mm CB-00009351 2427430085P P709
15 Wire 30/30P H/H 1571#28 L=220mm CB-00009352 2427430085T P709
16 Wire 8/8P H/H 1061#26 L=560mm CB-00009353 2427408083P P710
17 Wire 8/8P H/H 1061#26 L=560mm CB-00009354 2427408083T P710
18 Wire 12/12P H/H 1061#26 L=180mm CB-00009355 2427412049P P812
19 Wire 12/12P H/H 1061#26 L=180mm CB-00009356 2427412049T P812
20
Documentation: [Quick
Start Guide, CD Rom,
User's Guide (CD ROMVIEWSONIC VT2730-M VS13154-1M UG DC-00010261 2604208759 26042
21
Electronic
Components:[LCD Panel,
Speaker, and all Electronic
Panel M270H1-L01 (A) CMO(2/5/5,ND 8%) E-00010012 2212024100P V901
22 Carton VIEWSONIC VT2730-M VS13154-1M BOX P-00010151 2011127065P 6P01
23 Foam JC279E EPS (L) P-00010152 2012118901P 6P20
24 Foam JC279E EPS (R) P-00010153 2012118902P 6P21
25 Foam JC279E EPS (B) P-00010154 2012118903P 6P22
26 Plastic Bag 800x800mm EPE/T=0.5mm+HDPE/T=0.02mm 26" P-00008950 2013054065P 6P60
27 Stand VT2730 ABS94HB G.L BLACK PL-00008814 2603207568 26032
28 Neck JC279U ABS94HB G.L BLACK2028562601P PL-00008818 2603807257 26038
Remark 1: Above listed items are examples, supplier can expand the rows to add more necessary item
Remark 2:
Notice: 1. For some special parts, some photos for identification purpose may be asked by reques
2. For all internal cables, there must be some wordings on the "Description" column about where the cable is used (connecting to which two part
3. All internal cables/wires should be put in the "Cables" category
4. All external cables should be put in the "Accessories" category
5. Parts relationship (Main/Second source or 1/2/3/4) should be added in the "Compatibility" column
6. If any part for certain product isn't listed in the form, supplier/PE can add it themselves and keep the part name unifie
All revised RSPLs with newly added items or any change made should be highlighted and correlated with the ECN/ECR approved by ViewSonic Corporation. This is to eliminate repeated cro
RECOMMENDED SPARE PARTS LIST (VT2730)
ViewSonic Model Number: VS13154
Accessories: [Adapter,
Battery, Remote Controller,
Plastics: [Pedestal,
stand/neck, Plate, Button,
PC Board Assembly: [All
boards or PCBA]
Cabinets: [Front Panel, All
Covers, Base Assembly]
Cables: [All internal
Cables/wires]
Packing Material: [Carton,
Box, Foam, Bags]
11. Recommended Spare Parts List
84
Item ViewSonic P/N Ref. P/N Location Universal number# Q'ty
1 NA 27001C15900 SET ASS'Y VT2730-M 1
2 NA 27011C15900 PCB ASS'Y VT2730-M 1
3 NA 27021C15900 PCB-MAIN VT2730-M 1
4 NA 27041C15900 AUTO INSERT-MAIN VT2730-M 1
5 NA 27061C15900 SMT-MAIN VT2730-M 1
6 NA 2345310496P-01 CAP CHIP CS 0402/X7R/16V 0.1u K T DARFON 1
7 NA 2345310496P-02 CAP CHIP CS 0402/X7R/16V 0.1u K T TDK 1
8 NA 2345310496P-03 CAP CHIP CS 0402/X7R/16V 0.1u K T WALSIN 1
9 NA 2345310496P-04 CAP CHIP CS 0402/X7R/16V 0.1u K T MARUWA 1
Description
BOM LIST (VT2730-M)
Rev: 1a
85
90 NA 2349900696P CAP,CHIP SPEC CHIP C 22u 1206/X5R/10V M T 1
95 NA 2345510396P CAP CHIP CS 0402/Y5V/50V 0.01u Z T 1
98 NA 2347710696P-01 CAP CHIP CS 0805/Y5V/10V 10u Z T DARFON 1
99 NA 2347710696P-02 CAP CHIP CS 0805/Y5V/10V 10u Z T TDK 1
100 NA 2347710696P-03 CAP CHIP CS 0805/Y5V/10V 10u Z T WALSIN 1
101 NA 2347710696P-04 CAP CHIP CS 0805/Y5V/10V 10u Z T MARUWA 1
106 NA 2345110296P CAP CHIP CS 0402/X7R/50V 1000p K T 1
122 NA 2340127096P CAP CHIP CS 0402/NPO/50V 27p J T 1
86
87
88
421 NA 2346722496P-01 CAP CHIP CS 0603/Y5V/16V 0.22u Z T DARFON 1
422 NA 2346722496P-02 CAP CHIP CS 0603/Y5V/16V 0.22u Z T TDK 1
423 NA 2346722496P-03 CAP CHIP CS 0603/Y5V/16V 0.22u Z T WALSIN 1
424 NA 2346722496P-04 CAP CHIP CS 0603/Y5V/16V 0.22u Z T MARUWA 1
89
512 NA 2364302196P DIODE,SCHOTTKY(SMD) SR36(3A/60V) DO-214AA MOSPEC 1
513 NA 2364303296P DIODE,SCHOTTKY(SMD) SM360B DO-214AA SECOS 1
514 NA 2364303396P DIODE,SCHOTTKY(SMD) SR36 DO-214AA PEC 1
515 NA 2364302096P DIODE,SCHOTTKY(SMD) SK34B-TG-WS D0-214AA WILLAS 1
517 NA 2364302196P DIODE,SCHOTTKY(SMD) SR36(3A/60V) DO-214AA MOSPEC 1
519 NA 2364303396P DIODE,SCHOTTKY(SMD) SR36 DO-214AA PEC 1
90
520 NA 2364302096P DIODE,SCHOTTKY(SMD) SK34B-TG-WS D0-214AA WILLAS 1
522 NA 2364600496P-01 DIODE,SWITCH SMD MM4148 SOD80C GRANDE 1
523 NA 2364600496P-02 DIODE,RECT(SMD) BAS32L SOD80C PHILIPS 1
524 NA 2364600496P-03 DIODE,SWITCH RLS4148-T11 SOD80C ROHM 1
525 NA 2436247996P VARISTOR ESD V-PORT 0603 4.7P M 1
545 NA 2364303696P DIODE,SCHOTTKY(SMD) BAT54C SOT-23 PHILIPS(NXP) 1
546 NA 2364201296P DIODE,RECT(SMD) BAT54C-F SOT-23 DIODES 1
569 NA 2213611203P-05 FUSE SMD MF-NSMF110(1206 1.1A/6V) BOURNS 1
570 NA 2360501196P FET P-CH SMD AP9435GM SO-8 APEC 1
571 NA 2360501796P FET P-CH SMD APM9435KC-TRG SO-8 Anpec 1
572 NA 2360502596P FET P-CH SMD STM9435 SO-8 SamHop 1
573 NA 2360503496P FET P-CH SMD UT9435HL SO-8 UTC 1
574 NA 2365335096P LINEAR IC AIC1117APY SOT-223 AIC 1
575 NA 2365814296P IC LINEAR(SMD) AP1117EL-13 SOT-223 DIODES 1
576 NA 2365336426P LINEAR IC LD1117AL-ADJ-A SOT-223 UTC 1
577 NA 2365335956P LINEAR IC MT1117-ADJ SOT-223 Ma Trix 1
578 NA 2365335936P LINEAR IC AP1534SG-13 SOP-8L DIODES 1
579 NA 2365426946P DIGITAL IC AX3113 SOP-8L AXELITE 1
580 NA 2365336356P LINEAR IC RS6513 SOP-8 ORISTER 1
581 NA 2365810296P IC LINEAR(SMD) AIC1084PM-ADJ TO-263 AIC 1
582 NA 2365808096P IC LINEAR(SMD) AP1084KL-13 TO-263 DIODES 1
583 NA 2365335856P LINEAR IC APE1084S(ADJ) TO-263 APEC 1
584 NA 2365336456P LINEAR IC UZ1084L-ADJ TO-263 UTC 1
585 NA 2360501196P FET P-CH SMD AP9435GM SO-8 APEC 1
586 NA 2360501796P FET P-CH SMD APM9435KC-TRG SO-8 Anpec 1
587 NA 2365335936P LINEAR IC AP1534SG-13 SOP-8L DIODES 1
588 NA 2365426946P DIGITAL IC AX3113 SOP-8L AXELITE 1
589 NA 2365336356P LINEAR IC RS6513 SOP-8 ORISTER 1
590 NA 2365810296P IC LINEAR(SMD) AIC1084PM-ADJ TO-263 AIC 1
591 NA 2365808096P IC LINEAR(SMD) AP1084KL-13 TO-263 DIODES 1
592 NA 2365335856P LINEAR IC APE1084S(ADJ) TO-263 APEC 1
593 NA 2365336456P LINEAR IC UZ1084L-ADJ TO-263 UTC 1
598 NA 2365427428P DIGITAL IC MSB1501-LF LQFP-100 MSTAR 1
599 NA 2365427568P DIGITAL IC MSD3003EG-LF-S7 LFBGA-377 MSTAR 1
600 NA 2365114396P MEMORY IC (FLASH) MX25L3205DM2I-12G SOP-8 MXIC 1
601 NA 2365108696P MEMORY IC HT24LC04 SO-8 HOLTEK 1
602 NA 2365113497P MEMORY IC (EEPROM) AT24C04BN-SH-T SOIC-8(8S1) ATMEL 1
603 NA 2365116988P MEMORY IC(SDRAM) EM68B16CWPA-25H FBGA-84 ETRONTECH 1
604 NA 2365116998P MEMORY IC(DRAM) A3R12E4JFF-G8E FBGA-84 ZENTEL 1
605 NA 2365911696P IC,DIGITAL SMD 24LC02B/SN SOIC-8 MICROCHIP 1
606 NA 2365426086P DIGITAL IC M24C02-WMN6TP SO-8 ST 1
91
614 NA 2365805996P IC LINEAR(SMD) LM358L SOP-8 UTC 1
615 NA 2365335826P LINEAR IC LM358DT SO-8 ST 1
616 NA 2365336196P LINEAR IC TPA3113D2PWPR TSSOP-28 TEXAS 1
617 NA 2365335996P LINEAR IC TPA6113A2 SOIC-8 TEXAS 1
622 NA 2438000001P HDCP KEY CODE HDCP KEY CODE 1
623 NA 2379500196T BEAD,HI-CURRENT Z= 80 ohm 0805 I=6.0A 1
625 NA 2370122016P COIL CHOKE SMD 22uH 12*12*4.6 YC124RT220MS YOUTH 1
628 NA 2379500196P BEAD,HI-CURRENT Z= 80 ohm 0805 I=6.0A 1
629 NA 2370122016P COIL CHOKE SMD 22uH 12*12*4.6 YC124RT220MS YOUTH 1
639 NA 2253200096P RES CHIP 1/10W RC 0603 1/10W 0 ohm J T 1
652 NA 2407640919P-02 SOCKET,SMD HDMI 19P TOP CONCRAFT (099ACAB19CBCCAC) 1
653 NA 2407640919P-02 SOCKET,SMD HDMI 19P TOP CONCRAFT (099ACAB19CBCCAC) 1
654 NA 2407640319P SOCKET,SMD HDMI 19P SINGATRON (2HE51U1-NB3) 1
655 NA 2407640519P-01 SOCKET,SMD HDMI 19P SIDE LEOCO (8500S19KT1F) 1
656 NA 2407640519P-02 SOCKET,SMD HDMI 19P SIDE CONCRAFT (099ABAC19CACCEN) 1
657 NA 2360301696P XISTOR NPN R SMD PMBS3904 SOT-23 PHILIPS 1
658 NA 2360300896P XISTOR NPN R SMD MMBT3904K SOT-23 FAIRCHILD 1
659 NA 2360301296P XISTOR NPN R SMD MMBT3904-F SOT23 DIODES 1
660 NA 2360302996P XISTOR NPN R SMD LMBT3904LT1G SOT-23 LRC 1
685 NA 2360100696P XISTOR PNP R SMD PMBS3906 SOT-23 PHILIPS 1
686 NA 2360100796P XISTOR PNP R SMD MMBT3906-F SOT-23 DIODES 1
687 NA 2360100896P XISTOR PNP R SMD MMBT3906LT1G SOT-23 ON 1
688 NA 2360101396P XISTOR PNP R SMD LMBT3906LT1G SOT-23 LRC 1
92
703 NA 2360100896P XISTOR PNP R SMD MMBT3906LT1G SOT-23 ON 1
725 NA 2259100008P RES CHIP NETWORKS 8P4R 1/16W(0402) 0ohm J P=0.5 1
735 NA 2253110396P RES CHIP 1/16W RC 0402 1/16W 10Kohm J T 1
737 NA 2253147296P RES CHIP 1/16W RC 0402 1/16W 4.7Kohm J T 1
744 NA 2251111006P RES CHIP 1/16W RC 0402 1/16W 110 ohm F T 1
746 NA 2253110296P RES CHIP 1/16W RC 0402 1/16W 1K ohm J T 1
751 NA 2251264916P RES CHIP 1/10W RC 0603 1/10W 6.49Kohm F T 1
757 NA 2251290996P RES CHIP 1/10W RC 0603 1/10W 90.9 ohm F T 1
764 NA 2251112116P RES CHIP 1/16W RC 0402 1/16W 1.21K ohm F T 1
765 NA 2251118216P RES CHIP 1/16W RC 0402 1/16W 1.82 Kohm F T 1
93
795 NA 2253110596P RES CHIP 1/16W RC 0402 1/16W 1Mohm J T 1
859 NA 2253139296P RES CHIP 1/16W RC 0402 1/16W 3.9K ohm J T 1
94
904 NA 2253147996P RES CHIP 1/16W RC 0402 1/16W 4.7 ohm J T 1
95
980 NA 2251210026P RES CHIP 1/10W RC 0603 1/10W 10Kohm F T 1
996 NA 2253300096P RES CHIP 1/8W RC 0805 1/8 W 0 ohm J T 1
1014 NA 2202546300P PCB MULTILAYER JC279XX61UA M/B FR4*4 200*200mm 1
1015 NA 27201C15900 V-TYPE-MAIN VT2730-M 1
1016 NA 2336047713P HI-LIFE LOW ESR E.CAP(4000hr) EC 470u/ 16V 8*12 P=5.0 T 1
1021 NA 2336310613P CAP MINI ELE 105'C EC 10u/ 16V 4*7 P=2.5 T 1
1023 NA 2336010713P HI-LIFE LOW ESR E.CAP(3000hr) EC 100u/ 16V 6.3*7 P=2.5 T 1
1038 NA 27079C15900 SMT-SOLDER SIDE VT2730-M 1
96
97
98
99
100
1429 NA 27101C15900 MANUAL INSERT-MAIN VT2730-M 1
1430 NA 2302122491P CAP MTL MEF 0.22uF/100V P=5.0 J T 1
1431 NA 2302122491P CAP MTL MEF 0.22uF/100V P=5.0 J T 1
1432 NA 2416905000P UV TUNER DTVA50FVH1019B SAMSUNG 1
1433 NA 2371122001P COIL CHOKE DRWW8*10 0.35mm/25.5Ts 22uH 1
1437 NA 2404301111P CONNECTOR JST PH 12P SIDE P=2.0 OR EQUAL 1
1438 NA 2404301111T CONNECTOR JST PH 12P SIDE P=2.0 OR EQUAL 1
1439 NA 2404371003P CONNECTOR JST PH 4P TOP P=2.0 OR EQUAL 1
1440 NA 2404371003T CONNECTOR JST PH 4P TOP P=2.0 OR EQUAL 1
1443 NA 2407431915P-05 SOCKET D-SUB 15P TOP BLUE NIKETECH(1316S15-110071T) 1
1444 NA 2407431915T-05 SOCKET D-SUB 15P TOP BLUE NIKETECH 1
1445 NA 2405315101P-02 RCA JACK 1*5P TOP KYOYAKU (WT-01015H2B-01H) 1
1446 NA 2405315101P-06 RCA JACK 1*5P TOP NICKTECH (500-1505005401) 1
1447 NA 2405314101P-02 RCA JACK 1*3P+DIN 4P TOP KYOYAKU(WT-01014H2B-01H) 1
1448 NA 2405314101P-06 RCA JACK 1*3P+DIN 4P TOP NIKETECH (500-1403005502) 1
1449 NA 2405106900P-02 EARPHONE JACK 3.5 EAR PHONE TOP (577C) KOYOAKU(WTJ-035-28ZSA01) 1
1450 NA 2405106900P-06 EARPHONE JACK 3.5 EARPHONE TOP (577C) NIKETECH(500-B05A000601) 1
1451 NA 2405105900P EARPHONE JACK EARPHON 3.5 SIDE 284C(BLUE) JIONGYA (CKX3.5-02B-01) 1
1452 NA 2405900300P-02 OTHERS JACK DLT-1180A SIDE EDISON 1
1453 NA 2405900300P-07 OTHERS JACK 504-2S03080041 SIDE NIKETECH 1
1454 NA 2405312104P-02 RCA JACK 2P RED/WHITE TOP KYOYAKU(WT-01012H2B-01H) 1
1455 NA 2405312104P-06 RCA JACK 2P RED/WHITE TOP NIKETECH(500-1202005402) 1
1456 NA 2404301003P CONNECTOR JST XH 4P SIDE P=2.5 OR EQUAL 1
1457 NA 2404301003T CONNECTOR JST XH 4P SIDE P=2.5 OR EQUAL 1
1458 NA 2404312130P CONNECTOR 30P 2R1L TOP P=2.0mm 2046P**V 1
1459 NA 2404312130T CONNECTOR 30P 2R1L TOP P=2.0mm 2046P**V 1
1460 NA 2404380017P-04 CONNECTOR USB UB01123-4HHS-4F(TYPE-A) TOP FOXCONN 1
1461 NA 2369104001P-02 XTAL OSC 25.000MHZ/49US 0.1mW/20pF SKC 1
1462 NA 2369104001P XTAL OSC 25.000MHZ/49US 0.1mW/20pF 1
1463 NA 2369103611P XTAL OSC 12.0000MHZ/49US 0.1mW/20pF 1
1464 NA 2369103611P-02 XTAL OSC 12.0000MHZ/49US 0.1mW/20pF SKC 1
1465 NA 27102C15900 PROCESS-MAIN VT2730-M 1
1466 NA 2439520202P RADIATION CERAMIC 20*20*2mm LENPRO 1
1467 NA 27022C15900 PCB-CON VT2730-M 1
1468 NA 27042C15900 AUTO INSERT-CON VT2730-M 1
1469 NA 27062C15900 SMT-CON VT2730-M 1
1474 NA 2403703496P TACT SWITCH H=1.5mm F=260g TOP 1
101
1481 NA 2202547000P PCB MULTILAYER JC279XX K/B FR4*2 96.5*19.5mm 1
1482 NA 27089C15900 SMT-SOLDER SIDE-CON VT2730-3 1
1483 NA 2404811805P CONNECTOR(SMD) 5P TOP P=2.0mm CVILUX (CI0105M1V) 1
1484 NA 2404811805T CONNECTOR(SMD) 5P TOP P=2.0mm CVILUX (CI0105M1V) 1
1485 NA 2404811808P CONNECTOR(SMD) 8P TOP P=2.0mm CVILUX (CI0108M1V) 1
1486 NA 2404811808T CONNECTOR(SMD) 8P TOP P=2.0mm CVILUX (CI0108M1V) 1
1487 NA 27023C15500 PCB POWER JC279ET61KA 1
1488 NA 27043C15500 AUTO INSERT-POWER JC279ET61KA 1
1489 NA 27063C15500 SMT-POWER JC279ET61KA 1
1494 NA 2347122296P CAP CHIP CS 0805/X7R/50V 2200P K T 1
1495 NA 2341147196P CAP CHIP TEMPERATURE 125'C CS 0603/NPO/50V 470p J T 1
1504 NA 2349901796P CAP,CHIP SPEC CHIP C 10u 1206/X5R/25V M T 1
1519 NA 2346110396P CAP CHIP CS 0603/X7R/50V 0.01u K T 1
1527 NA 2341147196P CAP CHIP TEMPERATURE 125'C CS 0603/NPO/50V 470p J T 1
102
1568 NA 2364500396P DIODE,ZENER SMD RLZ5.6B (5.45-5.73V) LL-34 ROHM 1
1569 NA 2364503996P DIODE,ZENER SMD BZV55-C5V6 (5.2 ~ 6.0V) SOD-80C PHILIPS 1
1570 NA 2364505616P DIODE,ZENER SMD TZMC5V6 (5.2-6.0V) SOD-80C VISHAY 1
1571 NA 2364505626P DIODE,ZENER SMD RLZ5.6C (5.61~5.91V) LL-34 ROHM 1
1572 NA 2364505676P DIODE,ZENER SMD BZV55-C5V6 (5.2~6.0V) SOD-80 GOODARK 1
1573 NA 2364500696P DIODE,ZENER SMD RLZ12B (11.44-12.03V) LL-34 ROHM 1
1574 NA 2364512026P DIODE,ZENER SMD BZV55-B12 2% SOD-80C PHILIPS 1
1575 NA 2364512036P DIODE,ZENER SMD ZMM55-C12 (11.4~12.7V) LL-34 WILLAS 1
1578 NA 2364512036P DIODE,ZENER SMD ZMM55-C12 (11.4~12.7V) LL-34 WILLAS 1
1579 NA 2364600996P DIODE,SWITCH SMD BAV99 SOT23 DIODES 1
1580 NA 2364601096P DIODE,SWITCH SMD BAV99 SOT-23 PHILIPS 1
1590 NA 2364601696P DIODE,SWITCH SMD BAV70 SOT-23 PEC 1
1591 NA 2364601796P DIODE,SWITCH SMD BAV70N3 SOT-23 CYStech 1
1593 NA 2364601696P DIODE,SWITCH SMD BAV70 SOT-23 PEC 1
1594 NA 2364601796P DIODE,SWITCH SMD BAV70N3 SOT-23 CYStech 1
1597 NA 2364202696P DIODE,RECT(SMD) SS14 DO-214AC PEC 1
1598 NA 2364304196P DIODE,SCHOTTKY(SMD) SM140A SOD-214AC SECOS 1
1599 NA 2364304396P DIODE,SCHOTTKY(SMD) SS14 DO-214AC WILLAS 1
1600 NA 2364304496P DIODE,SCHOTTKY(SMD) B140 DO-214AC VISHAY 1
1613 NA 2365336146P LINEAR IC GR8870KG SOP-8 GRENERGY 1
1614 NA 2365336036P LINEAR IC OZ9937 SOP-16 O2-MICRO 1
1633 NA 2360100596P XISTOR PNP R SMD MMBT3906-NL SOT23 FAIRCHILD 1
1635 NA 2360606596P FET N-CH(SMD) 2N7002E-TI-E3 SOT-23 VISHAY 1
1636 NA 2360608496P FET N-CH(SMD) 2N7002K-T1-E3 SOT-23 VISHAY 1
1637 NA 2360609096P FET N-CH(SMD) 2N7002K SOT-23 PHILIPS 1
1638 NA 2360609196P FET N-CH(SMD) 2N7002LT1G SOT-23 ON 1
1639 NA 2360610796P FET N-CH(SMD) MTN7002ZHN3 SOT-23 CYStech 1
1646 NA 2360100596P XISTOR PNP R SMD MMBT3906-NL SOT23 FAIRCHILD 1
1648 NA 2360606596P FET N-CH(SMD) 2N7002E-TI-E3 SOT-23 VISHAY 1
1649 NA 2360608496P FET N-CH(SMD) 2N7002K-T1-E3 SOT-23 VISHAY 1
1650 NA 2360609096P FET N-CH(SMD) 2N7002K SOT-23 PHILIPS 1
103
1651 NA 2360609196P FET N-CH(SMD) 2N7002LT1G SOT-23 ON 1
1652 NA 2360610796P FET N-CH(SMD) MTN7002ZHN3 SOT-23 CYStech 1
1653 NA 2360702296P FET P&N-CH STM8457 SO-8 SamHop 1
1654 NA 2360702396P FET P&N-CH MTC2804Q8 SOP-8 CYSTECH 1
1655 NA 2360702596P FET P&N-CH P2804NVG SOP-8 NIKO-SEM 1
1656 NA 2360702296P FET P&N-CH STM8457 SO-8 SamHop 1
1657 NA 2360702396P FET P&N-CH MTC2804Q8 SOP-8 CYSTECH 1
1658 NA 2360702596P FET P&N-CH P2804NVG SOP-8 NIKO-SEM 1
1659 NA 2253475496P RES CHIP 1/4W RC 1206 1/4 W 750Kohm J T 1
1664 NA 2253422296P RES CHIP 1/4W RC 1206 1/4 W 2.2Kohm J T 1
1670 NA 2251310036P RES CHIP 1/8W RC 0805 1/8 W 100Kohm F T 1
1671 NA 2251327416P RES CHIP 1/8W RC 0805 1/8 W 2.74Kohm F T 1
1672 NA 2251310016P RES CHIP 1/8W RC 0805 1/8 W 1Kohm F T 1
1673 NA 2251390906P RES CHIP 1/8W RC 0805 1/8 W 909 ohm F T 1
1674 NA 2251368126P RES CHIP 1/8W RC 0805 1/8 W 68.1 Kohm F T 1
1698 NA 2253210596P RES CHIP 1/10W RC 0603 1/10W 1.0Mohm J T 1
1705 NA 2251344206P RES CHIP 1/8W RC 0805 1/8 W 442 ohm F T 1
1710 NA 2253310596P RES CHIP 1/8W RC 0805 1/8 W 1Mohm J T 1
1730 NA 2202145000P PC BOARD JC279XX61UA P/B FR1 200*140mm V1.00 2009/11/20 1
1733 NA 2364522016P DIODE,ZENER SMD MMSZ5251B SOD-123 PEC 1
1734 NA 2364522026P DIODE,ZENER SMD BZV55-C22 SOD-80C (LL-34) PHILIPS(NXP) 1
1735 NA 2364522036P DIODE,ZENER SMD ZMM55-C22 SOD-80C (LL-34) WILLAS 1
1736 NA 2364522096P DIODE,ZENER SMD RLZ22B LL-34 ROHM 1
1737 NA 27211C15500 V-TYPE-POWER JC279ET61KA 1
104
1738 NA 2284110291P CAP CER CC 1000P/1KV X7R P=5.0 K T 1
1742 NA 2335347773P CAP ELE LOW ESR 105'C(6000hr) EC 470u/ 16V 10*13 P=5.0 T 1
1743 NA 2335747713P-01 HI-LIFE LOW ESR E.CAP(6000hr) EC 470u/ 16V 10*13 P=5.0 T 1
1744 NA 2335347773P CAP ELE LOW ESR 105'C(6000hr) EC 470u/ 16V 10*13 P=5.0 T 1
1746 NA 2365327191P-01 LINEAR IC AMC431LPFTB TO-92 ADD (70C 1%) 1
1747 NA 2365327191P-02 LINEAR IC AP431VLA TO-92 DIODES (85C 1%) 1
1748 NA 2365327191P-03 LINEAR IC CM431GDCN TO-92 CHAMPION (85C 0.7%) 1
1749 NA 2365327191P-04 LINEAR IC AP431AVLA TO-92 DIODES (85C 0.5%) 1
1750 NA 2365327191P-05 LINEAR IC AMC431BLPFTB TO-92 ADD (70C 0.5%) 1
1751 NA 2365327191P-06 LINEAR IC TL431A3 TO-92 CYSTECH (85C 0.5%) 1
1752 NA 2361320191P XISTOR NPN R HSC945-P TO-92 HSMC 1
1753 NA 2361302591P XISTOR NPN R 2SC945-AP TO-92 NEC 1
1754 NA 2361313691P XISTOR NPN R KSC945CGTA TO-92 FAIRCHILD 1
1755 NA 2361320491P XISTOR NPN R STC945G TO-92 AUK 1
1756 NA 27212C15500 H-TYPE-POWER JC279ET61KA 1
1757 NA 2363231995P DIODE RECT UF4007 DO-41 1000V/1A PEC 1
1758 NA 2363234995P DIODE RECT UF4007 DO-41 MOSPEC 1
1759 NA 2363235795P DIODE RECT UF1007 DO-41 DIODES 1
1760 NA 2363220395P DIODE RECT UF4004G DO-41 PEC 1
1761 NA 2363235195P DIODE RECT UPG10G DO-204AL ZOWIE 1
1762 NA 2363235695P DIODE RECT UF1004 DO-41 DIODES 1
1763 NA 2363235995P DIODE RECT UF1004G DO-41 CTC 1
1764 NA 2213125214P FUSE MRT-2.5A BEL 1
1765 NA 2213125222P FUSE MET-2.5A (Tapping) CONQUER 1
1766 NA 2213225215P FUSE MICRO SR-5-2.5A 2.5A/250V BUSSMANN 1
1767 NA 2428106175P JUMPER (A.I) 0.6*17.5mm 1
1768 NA 2428106050P JUMPER (A.I) 0.6*5.0mm 1
1769 NA 2428106125P JUMPER (A.I) 0.6*12.5mm 1
1770 NA 2428106100P JUMPER (A.I) 0.6*10.0mm 1
1771 NA 2428106125P JUMPER (A.I) 0.6*12.5mm 1
1772 NA 2428106075P JUMPER (A.I) 0.6*7.5mm 1
1773 NA 2428106075P JUMPER (A.I) 0.6*7.5mm 1
1774 NA 2428106075P JUMPER (A.I) 0.6*7.5mm 1
1775 NA 2428106200P JUMPER (A.I) 0.6*20mm 1
1776 NA 2428106200P JUMPER (A.I) 0.6*20mm 1
1777 NA 2428106200P JUMPER (A.I) 0.6*20mm 1
1778 NA 2428106200P JUMPER (A.I) 0.6*20mm 1
1779 NA 2428106075P JUMPER (A.I) 0.6*7.5mm 1
1780 NA 2428106075P JUMPER (A.I) 0.6*7.5mm 1
1781 NA 2428106075P JUMPER (A.I) 0.6*7.5mm 1
1782 NA 2428106075P JUMPER (A.I) 0.6*7.5mm 1
1783 NA 2428106125P JUMPER (A.I) 0.6*12.5mm 1
1784 NA 2428106075P JUMPER (A.I) 0.6*7.5mm 1
1785 NA 2428106125P JUMPER (A.I) 0.6*12.5mm 1
1786 NA 2428106075P JUMPER (A.I) 0.6*7.5mm 1
1787 NA 2428106200P JUMPER (A.I) 0.6*20mm 1
1788 NA 2428106150P JUMPER (A.I) 0.6*15.0mm 1
1789 NA 2428106150P JUMPER (A.I) 0.6*15.0mm 1
1790 NA 2428106075P JUMPER (A.I) 0.6*7.5mm 1
1791 NA 2428106075P JUMPER (A.I) 0.6*7.5mm 1
1792 NA 2428106075P JUMPER (A.I) 0.6*7.5mm 1
1793 NA 2428106075P JUMPER (A.I) 0.6*7.5mm 1
1794 NA 2428106075P JUMPER (A.I) 0.6*7.5mm 1
1795 NA 2428106100P JUMPER (A.I) 0.6*10.0mm 1
1796 NA 2428106100P JUMPER (A.I) 0.6*10.0mm 1
1797 NA 2428106075P JUMPER (A.I) 0.6*7.5mm 1
1798 NA 2428106125P JUMPER (A.I) 0.6*12.5mm 1
1799 NA 2428106125P JUMPER (A.I) 0.6*12.5mm 1
1800 NA 2428106100P JUMPER (A.I) 0.6*10.0mm 1
1801 NA 2428106075P JUMPER (A.I) 0.6*7.5mm 1
1802 NA 2428106100P JUMPER (A.I) 0.6*10.0mm 1
1803 NA 2428106175P JUMPER (A.I) 0.6*17.5mm 1
1804 NA 2428106125P JUMPER (A.I) 0.6*12.5mm 1
1805 NA 2233410495P RES,CBN 1/4 S RD 1/4WS 100Kohm J T52 1
1806 NA 2233410495P RES,CBN 1/4 S RD 1/4WS 100Kohm J T52 1
1807 NA 2239237425P RES PRE 1/4S RN 1/4WS 37.40K F T52 MINI 1
1808 NA 2362901595P TRANSIENT VOLTAGE SUPPRESSORP6KE18A DO-15 CONCORD 1
1809 NA 2362901695P TRANSIENT VOLTAGE SUPPRESSORP6KE18A DO-15 PEC 1
1810 NA 2362901795P TRANSIENT VOLTAGE SUPPRESSORP6KE18A DO-15 SECOS 1
1811 NA 27111C15500 MANUAL INSERT-POWER JC279ET61KA 1
1812 NA 2300947401P-01 X CAP MINI X2 0.47u/275V P=15.0 M C EUROPTRONIC 1
1813 NA 2300947401P-02 X CAP MINI X2 0.47u/275V P=15.0 M C CHIEFCON 1
1814 NA 2287133101P-01 CAP CER Y1 330pF/250V P=10.0 K C SEC 1
1815 NA 2287133101P-02 CAP CER Y1 330pF/250V P=10.0 K C WANSHENG 1
1816 NA 2287133101P-01 CAP CER Y1 330pF/250V P=10.0 K C SEC 1
1817 NA 2287133101P-02 CAP CER Y1 330pF/250V P=10.0 K C WANSHENG 1
1818 NA 2287122201P-01 CAP CER Y1 2200pF/250V P=10.0 M C SEC 1
1819 NA 2287122201P-02 CAP CER Y1 2200pF/250V P=10.0 M C WANSHENG 1
1820 NA 2357518108P-01 EC HI-RIPPLE 105C 400V(3000hr) EC 180u/400V 20*40 P=10.0 S (ELITE) 1
105
1821 NA 2357518108P-02 EC HI-RIPPLE 105C 400V(3000hr) EC 180u/400V 20*40 P=10.0 S (HER-MEI) 1
1822 NA 2336015811P HI-LIFE LOW ESR E.CAP(6000hr) EC 1500u/ 16V 10*21 P=5.0 C 1
1823 NA 2335815811P-01 HI-LIFE LOW ESR E.CAP(6000hr) EC 1500u/ 16V 10*20 P=5.0 C 1
1833 NA 2335847731P-01 HI-LIFE LOW ESR E.CAP(6000HR) EC 470u/ 35V 10*20 P=5.0 C 1
1834 NA 2275450901P CAP CER TC 5P/3KV SL P=7.5 J C 1
1835 NA 2275450901P CAP CER TC 5P/3KV SL P=7.5 J C 1
1836 NA 2275456001P CAP CER TC 56p/3KV SL P=7.5 J C 1
1840 NA 2368502900P RECT BRIDGE GBU4K 4A/800V MOSPEC 1
1841 NA 2368503100P RECT BRIDGE SBU4K 4A/800V PEC 1
1842 NA 2368503300P RECT BRIDGE GBU406 TSC 1
1843 NA 2368503200P RECT BRIDGE GBU4K 4A/800V WILLAS 1
1844 NA 2368503000P RECT BRIDGE GBU4K 4A/800V LRC 1
1845 NA 2362402200P PHOTO COUPLR K1010-3B (H4) COSMO 1
1846 NA 2362402400P PHOTO COUPLR TLP781F DIP-4 TOSHIBA 1
1847 NA 2362402500P PHOTO COUPLR TCET1116G DIP-4 VISHAY 1
1848 NA 2371110901P COIL CHOKE R4*12 1.0uH 1.0mm/8.5Ts 1
1851 NA 2379103500P FERRITE CORE 0.5/3Ts 6*10 1
1852 NA 2371157800P COIL CHOKE ET-24 0.5mm/32Ts*2 11.5mH 1
1853 NA 2371220422P LINE FILTER CHOKE ET-24 0.45mm 35+35/35+35Ts LI TAI (LF-008813) 1
1854 NA 2407414600P-04 SOCKET(AC INLET) SS-120-C-PCB-S RONG FENG 1
1855 NA 2407414600P-03 SOCKET(AC INLET) TU-301-SP-SAE-K3 TECX 1
1856 NA 2404371011P CONNECTOR JST PH 12P TOP P=2.0 OR EQUAL 1
1857 NA 2404380504P CONNECTOR CP0502P1HL1-LF CAILUX 1
1858 NA 2404380702P CONNECTOR FRH01-D3502E FRANCON 1
1859 NA 2404380303P CONNECTOR FOXCONN 1
1869 NA 2229401912P THERMISTOR,NTC 5 ohm/5A P=7.5 1
1870 NA 2235524816P RES,MTL 2 RS 2WS 0.24 ohm J P=7.0 1
1871 NA 2235456316P RES,MTL 1 RS 1WS 56Kohm J P=7.0 1
1872 NA 2235510106P RES,MTL 2 RS 2W 100ohm J P=7.0 1
1873 NA 2374234042P XFORMER POWR ETD34 450uH 0.6mm/21Ts LI-TAI(PT-011697-2) 1
1874 NA 2374303006P XFORMER INVERTER EEL-22 0.1*18/0.05mm 25+25/2100Ts CHENPING(T010027-6) 1
1875 NA 2371120401P COIL CHOKE EE-8.3D 250mH 0.06*386Ts 1
1876 NA 2371120401P COIL CHOKE EE-8.3D 250mH 0.06*386Ts 1
1877 NA 27112C15500 PROCESS-POWER JC279ET61KA 1
1878 NA 2363304800P DIODE SCHOTTKY GMR10H200C TO-220FPAB GAMMA 1
1879 NA 2363305100P DIODE SCHOTTKY FCH10A20 TO-220AB NI 1
1880 NA 2363305200P DIODE SCHOTTKY SP10200 ITO-220 SECOS 1
1881 NA 2363308800P DIODE SCHOTTKY MBR10200FP TO-220FP CYStech 1
1882 NA 2363304200P DIODE SCHOTTKY GMR10H60C TO-220FPAB GAMMA 1
1883 NA 2363304100P DIODE SCHOTTKY SB1060FCT TO-220AB PEC 1
1884 NA 2363304600P DIODE SCHOTTKY FCQ10U06 TO-220AB NI 1
1885 NA 2363300400P DIODE SCHOTTKY FCQ10A06 10A/60V NI 1
1886 NA 2363305500P DIODE SCHOTTKY SP1060 10A/60V ITO-220 SECOS 1
1887 NA 2363308100P DIODE SCHOTTKY SBL1060CTP ITO-220S DIODES 1
1888 NA 2363308700P DIODE SCHOTTKY MBR1060FP TO-220FP CYStech 1
1889 NA 2363300500P DIODE SCHOTTKY FCH10A15 150V/10A TO-220AB NI 1
1890 NA 2363304000P DIODE SCHOTTKY FCH10U15 TO-220AB NI 1
1891 NA 2363304500P DIODE SCHOTTKY SB10150FCT TO-220AB PEC 1
1892 NA 2363305600P DIODE SCHOTTKY SP10150 10A/150V ITO-220 SECOS 1
1893 NA 2363305800P DIODE SCHOTTKY FSH10A15 TO-220AC NI 1
1894 NA 2361610000P FET N-CH AP09N70GI-A TO-220CMF APEC 1
1895 NA 2361613400P FET N-CH SMK0870F TO-220F AUK 1
1896 NA 2072263701P HEAT SINK JT229HP AL 45x23x10mm 1
1897 NA 2072263702P HEAT SINK N2230W-2M AL 45x23x10mm DIFFERENCE HOLE 1
1898 NA 2072263704P HEAT SINK JC279E AL 55*23*10 1
1899 NA 2072253903P HEAT SINK JT178DP SPTE T=1MM 1
1900 NA 2072253903P HEAT SINK JT178DP SPTE T=1MM 1
1901 NA 2105251400P SPRING PLATE SPTE T=0.3MM (GROUND PLATE) JS 1
1902 NA 2071898400P BRACKET FIX JC279E AC SOCKET BKT SECC 0.8T 1
1903 NA 2074165400P HOLDER JC279E NYLON66 94V2 LCC-34 1
1904 NA 2084730082P SCREW BND T+ M3X8(BND T+) 1
1907 NA 27025C15900 PCB-IR VT2730-M 1
106
1908 NA 27121C15900 MANUAL INSERT-IR VT2730-M 1
1909 NA 2363706608P-03 LED BLU/ORG L=5.0mm BRIGHTEK 1L0392A1B12MM503 1
1910 NA 2419301800P RECEIV BLOCK ECM-A36-N3F4 ECEL 1
1911 NA 2419302300P RECEIV BLOCK KSM-602TM2M KODENSHI 1
1914 NA 2202145700P PC BOARD VT2730 IR/B FR1 28.5*21mm 1
1915 NA 27015C15900 FRONT ASS'Y VT2730-M 1
1916 NA 27081C15900 FRONT BEZEL VT2730-M 1
1917 NA 2024291102P-01 FRONT BEZEL VT2730 ABS94HB G.L BLACK 1
1918 NA 2033154701P IR COVER VT2730 PC LIMPID GE121R-21051 1
1919 NA 2053758901P LED INDIC.-PWR N52W LENS UT-0520T COLOR T57015 1
1920 NA 2051352800P NAME PLATE 38.00MM*5.90MM 1
1921 NA 2044275801P FUNCTION KEY JC279E ABS94HB G.L BLACK 1
1922 NA 27181C15900 LCD PANEL ASS'Y VT2730-M 1
1923 E-00010012 2212024100P LCD PANEL M270H1-L01 (A) CMO(2/5/5,ND 8%) 1
1924 NA 2071685402P SHIELD PLATE JC279E 61UA SECC 0.6T 1
1925 NA 2072055902P METAL FITTG-I/O JC279E 61UA SIDE IO SECC 0.6T 1
1926 NA 2054155802P ORNAMENT JC279E 61UA SIDE IO PC 0.5T ADHESIVE BLACK 1
1927 NA 2080003700P SCREW SPE ISZZTER001A M3*6L MSWR17/FZMYI 4
1928 NA 2080003700P SCREW SPE ISZZTER001A M3*6L MSWR17/FZMYI 2
1929 NA 2082630082P SCREW M3X8 P=0.5 2
1934 NA 2055613392P LABEL VSC HIGH VOLTAGE WARNING LABEL 0.015
1935 NA 27185C15900 FRONT OTHER VT2730-M 1
1936 NA 2433310012P-01 SHIELDING FOAM W10*H10.5*L15mm JOINSET 1
1937 NA 2433310012P SHIELDING FOAM W10*H10.5*L15mm 1
1938 NA 2061255900P SPONGE SPONGE BLACK20*15*25MM 1
1939 NA 2061255900P SPONGE SPONGE BLACK20*15*25MM 1
1940 CB-00009347 2427405024P WIRE HARNESS 5/5P H/H 1007#26 L=330mm 1
1941 CB-00009348 2427405024T WIRE HARNESS 5/5P H/H 1007#26 L=330mm 1
1942 CB-00009349 2427404107P WIRE HARNESS 4/2+2P H/A 1007#24+CORE L=430mm 1
1943 CB-00009350 2427404107T WIRE HARNESS 4/2+2P H/A 1007#24+CORE L=430mm 1
1950 NA 2391310065P-01 SPEAKER ASS'Y 10W/6ohm (R) D.L 1
1951 NA 2391310065P-06 SPEAKER ASS'Y 10W/6ohm (R) UDID (161673320020) 1
1952 NA 2391310066P-01 SPEAKER ASS'Y 10W/6ohm (L) D.L 1
1953 NA 2391310066P-06 SPEAKER ASS'Y 10W/6ohm (L) UDID (161673320010) 1
1955 NA 2071898500P BRACKET FIX JC279E HINGE SUPPORT SECC 1.0T 2
1956 NA 2082630082P SCREW M3X8 P=0.5 2
1958 NA 27016C15900 FINAL ASS'Y VT2730-M 1
1959 NA 27086C15900 CABI BACK VT2730-M 1
1960 C-00010085 2022288602P-01 CABI BACK JC279E UA ABS94HB G.L BLACK 1
1961 NA 2055636117P LABEL VT2730-M VS13154-1M SMALL LABEL 1
1962 NA 2055617101P LABEL 10*20 HI-POT TESTED OK 1
1963 NA 2055135674P LABEL VIEWSONIC VT2730-M VS13154-1M CMO 1
1964 NA 27186C15900 STAND ASS'Y VT2730-M 1
1965 NA 2028269001P STAND VT2730 ABS94HB G.L BLACK 1
1966 NA 2028562601P NECK JC279U ABS94HB G.L BLACK 1
1967 NA 2106665900P HINGE JC279E U NECK HINGE 0~20 50kg -CM (H.Y.) 1
1969 NA 2039820800P FOOT PAD 20*3.0T SQUARE GRAIN BLK 4
1970 NA 27190C15900 FINAL OTHER VT2730-M 1
1972 NA 2084740084P SCREW BND T+ SCREW BNDT+ M4*8(BND T+) BLACK 2
1974 C-00010086 2027276001P DUST COVER JC279E HINGE COVER ABS94HB G.L BLACK 1
1975 NA 27005C15900 ACCESSORY ASS'Y VT2730-M 1
1976 NA 2005100500P BATTERY,DRY R03UG 1.5V (AAA) English TOSHIBA 2
1977 A-00008696 2419200272P REMOTE CONTROL ViewSonic 35-key ATSC Remote (PHILIPS RC5 Code) 1
1978 A-00005362 2427130046P AC POWER CORD USA WALL 1.83M BLACK 1
1979 NA 2001132184P OWNER GUIDE VIEWSONIC VT2730-M VS13154-1M UG 1
1980 NA 2002400048P QUICK SETUP GUIDE VIEWSONIC VT2730-M VS13154-1M QSG EN 1
1981 NA 2002400049P QUICK SETUP GUIDE VIEWSONIC VT2730-M VS13154-1M QSG FR 1
1982 NA 2001950220P ATTACH SHEET VIEWSONIC RETURN PREVENTION FLYER-LCD TV 1
1983 NA 2013222536P POLYETHY BAG 250mmX350mmX0.3t ADD>PE-LD< 1
1984 NA 27006C15900 PACKING ASS'Y VT2730-M 1
1985 P-00010151 2011127065P CARTON BOX VIEWSONIC VT2730-M VS13154-1M BOX 1
1986 NA 2055632349P LABEL VT2730-M VS13154-1M CMO 1
1987 NA 2055613611P LABEL ENERGY STAR STICKER 11x11mm 1
1988 NA 2055613750P LABEL VSC DOLBY/HDMI/SRS-HD STICKER 68*8MM WHITE 1
1989 P-00010152 2012118901P POLYFOAM JC279E EPS (L) 1
1990 P-00010153 2012118902P POLYFOAM JC279E EPS (R) 1
1991 P-00010154 2012118903P POLYFOAM JC279E EPS (B) 1
1992 P-00008950 2013054065P POLYETHY BAG 800x800mm EPE/T=0.5mm+HDPE/T=0.02mm 26" 1
1993 NA 2013228817P POLYETHY BAG 300X400X0.03T mm LDPE 1
107
* Readers Response*
Dear Readers:
Thank you in advance for your feedback on our Service Manual, which allows continuous improvement
of our products. We would appreciate your completion of the Assessment Matrix below, for return to
ViewSonic Corporation.
Assessment
A. What do you think about the content of this Service Manual?
Unit Excellent Good Fair Bad
1. Precautions and Safety Notices
2. Specification
3. Front Panel Function Control Description
4. Circuit Description
5. Adjusting Procedure
6. Trouble Shooting Flow Chart
7. Block Diagram
8. Schematic Diagrams
9. PCB Layout Diagrams
10. Exploded View And Exploded Parts List
11. Recommended Spare Parts List

B. Are you satisfied with this Service Manual?
I tem Excellent Good Fair Bad
1. Service Manual Content
2. Service Manual Layout
3. The form and listing

C. Do you have any other opinions or suggestions regarding this service manual?

Readers basic dada:
Name: Title:
Company:
Add:
Tel: Fax:
E-mail:
After completing this form, please return it to ViewSonic Quality Assurance in the USA at facsimile
1-909-839-7943.
108

VT2730-1M SM 1a

Uploaded by

Copyright:

Available Formats

VT2730-1M SM 1a

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

VT2730-1M SM 1a

Uploaded by

Copyright:

Available Formats

Service Manual

You might also like