0% found this document useful (0 votes)

4 views

02. embedded_software_solutions

Teamcenter 13.0 provides comprehensive Embedded Software Solutions that facilitate the management of embedded software development processes, including system design, calibration, configuration data, and control units. The solutions integrate into the product life cycle, enabling effective tracking of dependencies, requirements, and design data, while also supporting ClearCase integration for source code management. Various functionalities such as signal management, functional distribution, and binary management are included to enhance product quality and accelerate development.

Uploaded by

cad cad

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

4 views

02. embedded_software_solutions

Uploaded by

cad cad

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 112

Teamcenter 13.

Embedded
Software
Solutions
PLM00045 - 13.0
Contents

Getting started with embedded software solutions

Overview of getting started with embedded software solutions ─────── 1-1
Embedded software development process ───────────────────── 1-1
Embedded Software Solutions ───────────────────────────── 1-2
Industry solution matrix ───────────────────────────────── 1-3
Before you begin ────────────────────────────────────── 1-4
Enabling Embedded Software Solutions ─────────────────────── 1-6
Overview of enabling Embedded Software Solutions ─────────────────── 1-6
Installing Embedded Software Solutions ────────────────────────── 1-6
Licensing ──────────────────────────────────────────── 1-17
Displaying Embedded Software Solutions menu commands ────────────── 1-18
Configuring Embedded Software Solutions ──────────────────── 1-18
Overview of configuring Embedded Software Solutions ──────────────── 1-18
Setting Embedded Software Manager preferences ─────────────────── 1-18
Setting Embedded Software Design Data Management preferences ───────── 1-19
Setting Calibration and Configuration Data Management preferences ──────── 1-19
Setting Teamcenter ClearCase Integration preferences ───────────────── 1-21
Embedded Software Solutions interface ────────────────────── 1-21
Overview of Embedded Software Solutions interface ────────────────── 1-21
Embedded Software Manager menus ─────────────────────────── 1-22
Embedded Software Design Data Management menus ───────────────── 1-22
Calibration and Configuration Data Management menus ─────────────── 1-23
ClearCase Integration menus ──────────────────────────────── 1-24
Understanding Embedded Software Solutions ────────────────── 1-24
Basic concepts about Embedded Software Solutions ────────────────── 1-24
Managing embedded systems using Embedded Software Solutions ───────── 1-24
Working in a Multi-Site Collaboration environment ─────────────────── 1-25
Working with ECAD integrations ────────────────────────────── 1-26
Basic tasks using Embedded Software Solutions ───────────────── 1-28

Managing the system design process

Overview of managing the system design process ──────────────── 2-1
Functional design management ──────────────────────────── 2-1
Product electronic architecture management ─────────────────── 2-1
Overview of product electronic architecture management ─────────────── 2-1
Creating control units ────────────────────────────────────── 2-2
Create control unit topology ────────────────────────────────── 2-4
Create connection object representing a network ───────────────────── 2-4
Associate control unit as a child of the electronic architecture ───────────── 2-4
Associating ports of control units to the connection object representing the network
─────────────────────────────────────────────── 2-5
Create processor dependency ───────────────────────────────── 2-5
View the processors accessed through a gateway processor ─────────────── 2-5

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 2

View the gateway processor associated with a processor ──────────────── 2-5

Remove the gateway processor associations from a processor ─────────────2-5
Distributing functions across control units ───────────────────── 2-6
Signal management ──────────────────────────────────── 2-6
Overview of signal management ─────────────────────────────── 2-6
Create messages and signals ───────────────────────────────── 2-6
Associate messages to control units ───────────────────────────── 2-6
Associate signals to ports of control units ────────────────────────── 2-7
Associate messages to connection ────────────────────────────── 2-8
View associations of a signal ───────────────────────────────── 2-8
View received and transmitted signals ──────────────────────────── 2-8
Remove associations from signals ────────────────────────────── 2-8
Dependency management ─────────────────────────────── 2-9
Overview of dependency management ─────────────────────────── 2-9
Establish software to hardware dependency ─────────────────────── 2-10
Establish software to software dependency ──────────────────────── 2-10
Establishing control unit to control unit dependency ────────────────── 2-10
View the processors associated with a software item ────────────────── 2-11
View the software associated with a software item ─────────────────── 2-11
Remove software associations from a processor ───────────────────── 2-11
Remove associations between software items ────────────────────── 2-11

Managing Calibration and Configuration Data

Working with Calibration and Configuration Data ───────────────── 3-1
Overview of managing Calibration and Configuration Data ─────────────── 3-1
Copying and pasting a CCDM table ────────────────────────────── 3-2
Stretching a CCDM table ──────────────────────────────────── 3-5
Working with parameter definitions ───────────────────────────── 3-6
Working with the parameter definition group ────────────────────── 3-12
Working with a master dictionary ────────────────────────────── 3-16
Managing conversion rules ────────────────────────────────── 3-17
Managing memory layout or memory block ──────────────────── 3-19
Overview of managing memory layout or memory block ─────────────── 3-19
Create a memory layout and add a memory block ──────────────────── 3-19
View, assign, and remove parameters from a memory block or memory layout ── 3-20
Edit memory layout or memory blocks ─────────────────────────── 3-21
Copy a memory block or memory layout ───────────────────────── 3-22
Delete a memory block or memory layout ───────────────────────── 3-22
Override address for parameter assignments ─────────────────────── 3-23
Override conversion rule ─────────────────────────────────── 3-23
Managing parameter configuration and value setting ───────────── 3-23
Overview of managing parameter configuration and value setting ────────── 3-23
Working with parameter configuration and value setting ─────────────── 3-24
Working with product variants ──────────────────────────────── 3-24
Create a project-specific breakdown ──────────────────────────── 3-27
Create a parameter value group ─────────────────────────────── 3-28
Save a parameter value group ──────────────────────────────── 3-29
Revise a parameter value group ─────────────────────────────── 3-30

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 3

© 2020 Siemens
Edit a parameter value group ──────────────────────────────── 3-30
Delete a parameter value group ─────────────────────────────── 3-30
Exporting and importing CCDM data ──────────────────────── 3-31
Overview of exporting and importing CCDM data ──────────────────── 3-31
Export CCDM data ─────────────────────────────────────── 3-33
Import CCDM data ─────────────────────────────────────── 3-34

Managing the embedded software implementation process

Overview of managing the embedded software implementation process ─ 4-1
Create software design component ────────────────────────── 4-2
Associate source code to software design component ────────────── 4-2
Associate reference data to software design component ──────────── 4-2
Define dependency ──────────────────────────────────── 4-2
View existing build dependencies of software design component ────── 4-3
Remove build dependencies of software design component ────────── 4-3
Modifying software design component ─────────────────────── 4-3
Revise software design component ────────────────────────── 4-3
Deleting software design component ──────────────────────── 4-3
Link software design component to binary ───────────────────── 4-3
Creating a repository of embedded software component ──────────── 4-4

Managing ClearCase Integration

Overview of managing ClearCase Integration ─────────────────── 5-1
Understanding ClearCase Integration ──────────────────────── 5-1
Basic concepts about ClearCase Integration ──────────────────────── 5-1
Benefits of ClearCase Integration ─────────────────────────────── 5-1
ClearCase and users ─────────────────────────────────────── 5-2
Teamcenter and ClearCase connection ─────────────────────────── 5-2
What is SCMVersionObject? ────────────────────────────────── 5-2
Basic tasks using ClearCase Integration ─────────────────────── 5-3
Teamcenter ClearCase Integration and Multi-Site ───────────────── 5-4
Administering ClearCase Integration ───────────────────────── 5-5
Overview of administering ClearCase Integration ───────────────────── 5-5
Verify connectivity with ClearCase ────────────────────────────── 5-5
Setting preferences ─────────────────────────────────────── 5-5
Create Teamcenter users of ClearCase data ───────────────────────── 5-6
Using ClearCase Integration ─────────────────────────────── 5-6
Overview of using ClearCase Integration ────────────────────────── 5-6
Register your default view ─────────────────────────────────── 5-6
Create SCMVersionObject ─────────────────────────────────── 5-7
Check out SCMVersionObject ───────────────────────────────── 5-8
Check in SCMVersionObject ────────────────────────────────── 5-9
Undo the checkout of SCMVersionObject ───────────────────────── 5-10
Create a workflow process for ClearCase data ────────────────────── 5-10

Using binary management

4 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

Binary management ─────────────────────────────────── 6-1

Create binary software revisions ──────────────────────────── 6-1
Mapping released binary to a specification and design components ───── 6-1
Upload binary data into Teamcenter ───────────────────────── 6-2
Making software available for flashing ──────────────────────── 6-2

Managing control units

Overview of managing control units ───────────────────────── 7-1
Create a control unit ─────────────────────────────────── 7-1
Identify and associate hardware and software to control units ──────── 7-1
Querying hardware software compatibility ───────────────────── 7-1
Overview of querying hardware software compatibility ───────────────── 7-1
Create a report of compatible software ─────────────────────────── 7-2
Associating control units to product configuration ──────────────── 7-2

Customizing solutions and exchanging software data

Overview of customizing solutions and exchanging software data ────── 8-1
Exchanging embedded software information ─────────────────── 8-1
Customizing Embedded Software Manager ───────────────────── 8-2
Using a custom constructor for parameter value group creation ──────── 8-3
Customizing for CCDM export and import ────────────────────── 8-4
Overview of customizing for CCDM export and import ────────────────── 8-4
Customize CCDM export and import ───────────────────────────── 8-4

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 5

© 2020 Siemens
6 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0
© 2020 Siemens
1. Getting started with embedded software
solutions
Overview of getting started with embedded software solutions
Embedded Software Solutions comprise different solutions that help to manage functions, product
electronic architecture, signals, dependencies, calibration and configuration-related parameter data,
embedded software design data, binaries, and control units in My Teamcenter and Structure Manager in
the rich client.

Using Embedded Software Solutions, you can view and manage the dependencies between control
units, control unit-to-software, and software-to-software. You can release software parts (for example,
binaries), perform impact analysis, manage changes, and make the software available for downloading
to external applications that flash (write) embedded software onto the control unit.

Embedded Software Solutions allow you to manage the calibration and configuration-related parameter
data of embedded systems into enterprise dictionaries. You can define, create, view, update, and delete
parameter data. It allows you to group related parameter definitions and associate parameter values to a
project. After values are associated, you can configure them using options and features applicable to the
project.

With Embedded Software Solutions, you can also manage design data-related embedded software
components and capture the dependencies between the design components. A repository of reusable
embedded software components can be managed within Teamcenter. You can also capture traceability
from the embedded software binary to the actual source code. You can manage source code data in
SCM systems, using the Teamcenter ClearCase Integration solution.

Embedded software development process

Embedded Software Solutions address the rapid expansion of embedded software in the industry. They
effectively manage the software development process by integrating it into the whole product life cycle,
which includes mechanical, electronic, software, and control system components. This approach helps
to accelerate product introduction, lower cost, and improve quality.

Embedded Software Solutions provide a common data model and out-of-the-box manageable objects.
The solutions help to specify product structures combining electronic, software, and electrical
components and allow tracking interdependencies among the parts composing a system. In addition to
helping in integration, the solutions also help to easily configure products and track and manage
software changes. This helps determine how the embedded software is used in different variants of a
product.

The various solutions involved in the embedded software development process are shown in the
following figure.

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 1-1

Embedded Software Solutions

This section provides a brief overview of the various Embedded Software Solutions:

• Systems Engineering and Requirements Management

Use Systems Engineering and Requirements Management to manage requirements related to the
embedded systems. It simplifies requirement development and access. With Systems Engineering and
Requirements Management, you can:

• Identify and develop the requirements of the project at inception.

• Associate requirements with the product design at an early stage and validate those requirements
against the design.

• Maintain requirements as separate items with specific properties.

• Establish traceability of requirements to various artifacts of the product.

• Functional design management

1-2 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

Use this solution to create functions, interfaces of functions, decompose functions, and manage
communication between them.

• Product electronic architecture management

Use this solution to create the overall product electronic architecture. This includes identifying and
creating control units, managing messaging protocols and networks, processors, signals, messages,
and defining dependencies between the control units.

• Functional distribution
Use this solution to allocate functions from the functional model to the control units in the product
electronic architecture.

• Signal management
Use this solution to manage communication information (signals and messages) and manage
networks within a product's electronic architecture. Signal management also helps you to identify
dependencies between control units that participate in the electronic architecture of a given product.

• Dependency management
Use this solution to specify and manage dependencies between system parts and assess the impact of
changes.

• Calibration and Configuration Data Management

Use this solution to manage calibration and configuration data of embedded software by creating
parameter definitions and setting values for parameters.

• Embedded Software Design Data Management

Use this solution to manage design data of embedded software components, define dependencies,
and associate specifications, source code, models, and test cases to software design data component.

• Embedded Software Binary management

Use this solution to create binary software revisions, establish traceability, and upload data into
Teamcenter while making it available for flashing.

• Control unit management

Use this solution to create control units, associate them to product configuration, and create
compatibility reports.

Industry solution matrix

Embedded Software Solutions can be used in various industries and each industry can use the solutions
relevant to it in its design, manufacturing, or production process. The following figure represents some
industry verticals and how they may use the different solutions.

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 1-3

Before you begin

For information about versions of operating systems, third-party software, and Teamcenter software
configurations that are certified for your platform, see the Hardware and Software Certifications
knowledge base article on https://support.sw.siemens.com.

Prerequisites Embedded Software Solutions have the same hardware and software
requirements as Teamcenter.
If you are implementing ClearCase Integration to manage embedded
software, ensure the following:

• Install a supported version of ClearCase. The supported version is:

• ClearCase 7.1.1

For instructions on installing ClearCase on your operating system,

see the vendor’s documentation at http://www.ibm.com

1-4 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

• Ensure you have a valid ClearCase license. If your ClearCase version is

a multisite version, then you must also have a multisite license.

• Ensure that your Teamcenter host runs one of the following

supported platforms:

• Microsoft Windows

• SUSE Linux

For information about operating system versions certified for

Teamcenter 13, see the see the Hardware and Software Certifications
knowledge base article on https://support.sw.siemens.com.

Note:
Management of ClearCase data is supported only in the rich
client.

Enable Embedded Software To enable Embedded Software Solutions, you must:

Solutions
• Install the following solutions:

• Embedded Software Manager

• Embedded Software Design Data Management

• Calibration and Configuration Data Management

• ClearCase Integration

• Possess valid licenses.

• Set user privileges for the menu commands.

Configure Embedded You may be required to set some preferences for configuring Embedded
Software Solutions Software Solutions.

Start Embedded Software You do not need to manually start Embedded Software Solutions. If you
Solutions have installed and enabled Embedded Software Solutions, the menu
commands appear in My Teamcenter, Platform Designer, and Structure
Manager.

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 1-5

Enabling Embedded Software Solutions

Overview of enabling Embedded Software Solutions

Depending on the functionality you require, you must first install one or more of these solutions:

• Embedded Software Manager

• Embedded Software Design Data Management

• Calibration and Configuration Data Management

• SCM ClearCase for Foundation

You must also check for the license and display the menu commands.

Installing Embedded Software Solutions

Install Embedded Software Solutions features

Typically, you install the Embedded Software Solutions when you install Teamcenter. However, if
Teamcenter is already installed, you can install the Embedded Software Solutions using Teamcenter
Environment Manager (TEM).

1. Start TEM.

2. Proceed to the Features dialog box.

3. Choose Teamcenter 9→Extensions→Mechatronics Process Management and select the

following:

• Embedded Software Manager to install Embedded Software Manager

• Embedded Software Design Data Management to install Embedded Software Design Data
Management.

• Calibration and Configuration Data Management to install Calibration and Configuration Data
Management. Product Variant gets automatically installed when you select this option.

Note:
If you are upgrading the Calibration and Configuration Data Management solution, you
must manually update the stylesheet by following these steps:

1-6 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

a. Find these XMLRenderingStylesheet type datasets in My Teamcenter–

datasetParmDefBCDRevision, datasetParmDefBitDefRevision,
datasetParmDefBoolRevision, datasetParmDefDateRevision,
datasetParmDefDblRevision, datasetParmDefHexRevision,
datasetParmDefIntRevision, datasetParmDefSEDRevision,
datasetParmDefStrRevision, datasetParmGrpValRevision, datasetParmDef,
datasetParmGrpDef, and datasetParmGrpDefRevision.

b. Find these XML stylesheets in $TC_DATA– ParmDefBCDRevision.xml,

ParmDefBitDefRevision.xml, ParmDefBoolRevision.xml,
ParmDefDateRevision.xml, ParmDefDblRevision.xml, ParmDefHexRevision.xml,
ParmDefIntRevision.xml, ParmDefSEDRevision.xml, ParmDefStrRevision.xml,
ParmGrpValRevision.xml, ParmDef.xml, ParmGrpDef.xml, and
ParmGrpDefRevision.xml.

c. Copy the content from the XML stylesheets into the corresponding
XMLRenderingStyleSheet type datasets.

• SCM ClearCase for Foundation to install Teamcenter ClearCase Integration.

Choose SCM ClearCase for Foundation feature. This installs the ClearCase types and sets
Teamcenter preferences to enable the integration.

Note:
You must have IBM ClearCase installed before you attempt to install the Teamcenter
ClearCase Integration. You should also know the ClearCase server name as this is required
during installation.

Embedded Software manager business objects installed

During installation, you are prompted to select the business objects you want to use. You can use
existing business objects, if you have any, or use the default Teamcenter business objects.

The Foundation option in Teamcenter Environment Manager provides the following three options:

• Base

• Processor

• Software

Select the base option to install the default Teamcenter base business objects. The processor and
software are optional. You must select the base option if you want to select and install the processor and
software options.

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 1-7

If you use existing business objects, you must update the relevant preferences after the installation is
complete. If you use the default Teamcenter business objects and select all the three options,
Teamcenter Environment Manager automatically installs the business objects and sets the necessary
preferences with the values of the installed business objects.

Type Parent type Purpose

AppSoftware Software Represents the application

software, for example, radio.

Calibration Software Represents calibration

software embedded in a
control unit. For example, the
software that calibrates the
product for a particular
context.

ConfigFile Software Represents configuration

software or a file containing
information used by the
application software. For
example, the frequency range
of a radio may differ between
Europe and the U.S.A. The
radio application software
reads the range from the
configuration software to
identify the correct range.

PriBootLoader Software Represents the primary

bootloader software that loads
operating software into the
control unit.

Processor Item Represents an internal

electronic device that runs
software. For example, a
control unit may contain three
CPUs, each of which is
modeled as a processor.

SecBootLoader Software Represents the secondary

bootloader software that
controls flashing access to the
control unit.

Software Item Represents the parent type for

all embedded software. It is

1-8 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

Type Parent type Purpose

not instantiated and is not

visible in the user interface.

Embeds ImanRelation Represents an association of

the software with the
processor in the context of a
structure. It indicates the
embedded software
(secondary) that is embedded
in a specified processor
(primary).

DependentOn ImanRelation Models dependencies between

embedded software within the
same control unit or across
different control units.

GatewayOf ImanRelation Models dependencies between

processors. A processor that is
linked and accessed through
another processor (commonly
called a gateway) is associated
with the other processor by
this relationship.

MemoryType LOV ListOfValues Provides the list of values for

the Memory Type attribute of
the processor, for example,
Programmable and
Reprogrammable.

ByteOrder LOV ListOfValues Provides the list of values for

the byteOrder attribute of the
processor, for example, Little
Endian and Big Endian.

Hardware Architecture LOV ListOfValues Provides the list of values for

the architecture attribute of
the processor, for example, 32
bit and 64 bit.

SCM_element_specification ImanRelation Represents which source code

versions were used in
generation of a given

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 1-9

Type Parent type Purpose

embedded software binary

part.

StruObjAttrOverride ImanRelation Implies override of the item/

item revision class attributes in
a given context.

Embedded software design data management business objects installed

Type Parent type Purpose

SwDesignComp Design Represents the embedded software

component and manages the design data
and the life cycle of the embedded
software component.

SwDesignCompRevision DesignRevision Represents an object that has source code

associated to it as specification in the
form of SCMVersionObject or a regular
dataset. Reference data such as design
specifications, test specifications, or
behavior specifications can be associated
as reference data.

Calibration and configuration data management business objects installed

Type Parent type Purpose

CalParm Architecture Represents all CCDM specific classes,

which represent a group of
CalParmRevision
parameters. It holds all the generic
nonvalue attributes that are used to
define a group of parameters.
Objects of this type cannot be
created and are hidden in the user
interface.

ParmGrpDef CalParm Represents the parameter master

dictionary, template, or the project
ParmGrpDefRevision
specific breakdown. The
ParmGrpDef class organizes the
parameters specific to a particular
feature, function, or device. The
class can also represent a subgroup

1-10 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

Type Parent type Purpose

of parameters in the hierarchy when

the parent group is used for
organizational purposes.
An extension is attached to the
ParmGrpDefRevision class so that
the associated objects are deleted
along with the revision.

ParmDef Item Represents a single parameter that is

used for calibrating or configuring
ParmDefRevision
embedded software. This is the
parent class of all parameters. It is
not visible in the user interface and
you cannot create instances of this
object.
The attached
CCDMParmTypeForParmDef LOV
has a measurement value that must
be identified.
The tableDefinition property on
most subclasses of
ParmDefRevision have property
constants attached with them to
enable initialization of the number
of rows and columns for the table.

ParmDefInt ParmDef Represents the Integer data type of

the parameter. It is a subclass of the
ParmDefIntRevision ParmDefRevision
ParmDef class.
The ParmDefIntRevision has the
Ccd0TypeRefInitValue constant
associated with it to enable
initialization of the table cell values.

ParmDefDbl ParmDef Represents the Double data type of

the parameter. It is a subclass of the
ParmDefDblRevision ParmDefRevision
ParmDef class.
The ParmDefDblRevision has the
Ccd0TypeRefInitValue constant
associated with it to enable
initialization of the table cell values.

ParmDefStr ParmDef Represents the String data type of

the parameter. It is a subclass of the
ParmDefStrRevision ParmDefRevision
ParmDef class.

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 1-11

Type Parent type Purpose

The ParmDefStrRevision has the

Ccd0TypeRefInitValue constant
associated with it to enable
initialization of the table cell values.

ParmDefBool ParmDef Represents the Boolean data type of

the parameter. It is a subclass of the
ParmDefBoolRevision ParmDefRevision
ParmDef class.
The ParmDefBoolRevision has the
Ccd0TypeRefInitValue constant
associated with it to enable
initialization of the table cell values.

ParmDefDate ParmDef Represents the Date data type of the

parameter. It is a subclass of the
ParmDefDateRevision ParmDefRevision
ParmDef class.
The ParmDefDateRevision has the
Ccd0TypeRefInitValue constant
associated with it to enable
initialization of the table cell values.

ParmDefHex ParmDef Represents the Hex (hexidecimal)

data type of the parameter. It is a
ParmDefHexRevision ParmDefRevision
subclass of the ParmDef class.
The ParmDefHexRevision has the
Ccd0TypeRefInitValue constant
associated with it to enable
initialization of the table cell values.

ParmDefSED ParmDef Represents the SED (state encoded)

data type of the parameter. It is a
ParmDefSEDRevision ParmDefRevision
subclass of the ParmDef class.
The ParmDefSEDRevision has the
Ccd0TypeRefInitValue constant
associated with it to enable
initialization of the table cell values.
If the ParmDefSEDRevision is
created without specifying values
for the valid values attribute and
with only the domain element
name, the initial value attribute will
contain the domain element name
string that was selected at the time
of creation.

1-12 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

Type Parent type Purpose

ParmDefBCD ParmDef Represents the binary coded decimal

data type of the parameter. It is a
ParmDefBCDRevision ParmDefRevision
subclass of the ParmDef class.
The ParmDefBCDRevision has the
Ccd0TypeRefInitValue constant
associated with it to enable
initialization of the table cell values.

ParmDefBitDef ParmDef Represents the BitMap data type of

the parameter. It is a subclass of the
ParmDefBitDefRevision ParmDefRevision
ParmDef class.

BitValue POM_object Holds the byte/bit information and

the name.

BitDef POM_object Holds the byte/bit information for

each bit in a
ParmDefBitDefRevision class.

ParmGrpVal Item Represents the part solution to the

ParmGrpDef object belonging to
ParmGrpValRevision ItemRevision
the project specific architecture
breakdown. Represents the value
solution of the
ParmDefBitDefRevision object in
the project-specific breakdown
This class organizes all the ParmVal
objects, which have values specific
to parameters grouped together in
ParmGrpDef for which this is a
solution.

ParmVal POM_object Carries the value of a parameter. The

value is based on a specific version
of the ParmDef class.

ParmValInt ParmVal Carries Integer type of values of a

parameter. The value can be a single
integer value or a single-dimension
array or a two-dimension array of
integer values.

ParmValDbl ParmVal Carries Double type of values of a

parameter. The value can be a single
double value or a single-dimension
array or a two-dimension array of
double values.

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 1-13

Type Parent type Purpose

ParmValStr ParmVal Carries String type of values of a

parameter. The value can be a single
string value or a single-dimension
array or a two-dimension array of
string values.

ParmValBool ParmVal Carries Boolean type of values of a

parameter. The value can be a single
logical value or a single-dimension
array or a two-dimension array of
logical values.

ParmValDate ParmVal Carries Date type of values of a

parameter. The value can be a single
date value or a single-dimension
array or a two-dimension array of
date values.

ParmValHex ParmVal Carries Hex type of values of a

parameter. The value can be a single
hex value or a single-dimension
array or a two-dimension array of
hex values.

ParmValSED ParmVal Carries SED type of values of a

parameter. The value can be a single
SED value or a single dimension
array or a two dimension array of
SED values.

ParmValBCD ParmVal Carries BCD type of values of a

parameter. The value can be a single
BCD value or a single dimension
array or a two dimension array of
BCD values.

ParmValBitDef ParmVal Carries BitDef type of values of a

parameter. It holds values for either
single bit of a byte or for multiple
bits and bytes.

BitValue POM_object Represents the Bit value.

Fnd0GenericConversion POM_application_objec Holds all generic non value

Rule t attributes which are used to define a
conversion rule. It is an abstract
base class for all conversion rules.

Fnd0FormulaConversion Fnd0GenericConversio Represents a conversion rule

nRule depending on an algebraic formula.

1-14 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

Type Parent type Purpose

It calls the algebraic formula to

translate the input value into output
value.

Fnd0RecordColConversion Fnd0Generic Represents a table conversion. It

ConversionRule contains a list of record conversion
to map an input value to an output
value.

Fnd0RecordConversion POM_object Holds all generic non-value

attributes that are used to define a
record conversion.
Fnd0RecordConversion is an
abstract base class for all record
conversions.

Fnd0ValueConversion Fnd0Record Represents the mapping from the

Conversion input value to the output value.

Fnd0RangeConversion Fnd0Record Represents the mapping to the

Conversion output value if the input value is
between the minimum value and
the maximum value.

Fnd0AlgebraicFormula POM_application Represents algebraic formulas: for

_object example, linear, quadratic, and
rational.

Mem0MemoryBlock POM_application Represents the memory block.

_object

Mem0MemoryRecord POM_application Represents the memory record.

_object

Ccd0ParmMemRecord Mem0Memory Represents the parameter memory

Record record.

Mem0MemoryContent POM_object Represents the memory content.

Mem0MemoryLayout Item Represents the memory layout.

Ccd0ParmMemLayout Mem0Memory Represents the parameter memory

Layout layout.

Mem0MemoryLayout ItemRevision Represents a revision of the memory

Revision layout.

Ccd0MemoryLayout Mem0Memory Represents a revision of the

Revision LayoutRevision parameter memory layout.

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 1-15

Type Parent type Purpose

Ccd0HasInputSource ImanRelation Represents the input sources of the

parameter memory layout.

Ccd0HasOutputSource ImanRelation Represents the output files of the

parameter memory layout.

Calibration and configuration data management LOVs

Name Description Type Attached to On business

property object

CCDMGrp Valid representations String Represents ParmGrpDef

DefRepresents for a parameter group
definition.
The possible values
can be:
Organizational Group
Packeted Parameter
Parameter
Breakdown
Parameter Dictionary
Parameter Group

Memory size List of memory size String sizeUnits ParmDefRevision

units.
The possible values
can be:
Bit
Byte

CCDMParmType Valid parameter types String parmType ParmDef

ForParmDef of parameter
definitions.
The possible values
can be:
Calibration
Configuration

1-16 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

Teamcenter ClearCase Integration business objects installed

Type Parent type Purpose

SCMVersionObject Workspace object Represents the version of an element of

ClearCase in Teamcenter. It can contain
single or multiple ClearCase elements. This
object uses the configuration context to
determine which version of the ClearCase
element it is associated with.

SCMElement Workspace object Represents the ClearCase element in

Teamcenter. It encapsulates the element
details, such as relative element path in the
version object base (VOB), element type,
and the ClearCase server to which the
element belongs.

SCMCompound Workspace object Represents a collection of SCM element

Element objects that are managed by the
SCMVersionObject.

SCMConfigContext Workspace object Represents the SCM server.

SCMServer POM object Holds the SCM configuration information

used to identify the correct version of the
SCMVersionObject.

Licensing

You should have a license for:

• Embedded Software Solutions

• Teamcenter ClearCase Integration

Note:
Ensure that you also have an IBM ClearCase product license.

• Calibration and Configuration Data Management

Note:
This solution also requires the level of Teamcenter license that enables authoring.

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 1-17

If any of the required licenses are not available when a user attempts to use the respective solution (for
example, all the licenses are assigned to other users), Teamcenter displays an error message. If you
encounter problems using Calibration and Configuration Data Management, contact your system
administrator; the problem may be a licensing issue.

Displaying Embedded Software Solutions menu commands

The Embedded Software Solutions menu commands in Structure Manager and My Teamcenter are not
displayed until the solutions are installed. You must also unsuppress the menus for the required user or
role. You must have administrator privileges to enable the menu commands using Command
Suppression.

If you are installing Embedded Software Manager, the menus are not displayed if the solution is not
licensed.

Configuring Embedded Software Solutions

Overview of configuring Embedded Software Solutions

Whether you need to configure the solution depends on how you installed it. If, during installation, you
choose to use the default Teamcenter business objects, no further configuration of the Embedded
Software Manager is required. Other solutions required additional configuration.

If you choose to use your own existing business objects, you must set the necessary preferences for
each solution as described.

Setting Embedded Software Manager preferences

Set these preferences after installing Embedded Software Manager and before users are given access to
the system.

• ESM_Processor_linked_attr

• ESM_Processor_programmableInService_attr

• ESM_Processor_memoryType_attr

• ESM_Processor_byteOrder_attr

• ESM_Processor_architecture_attr

• ESM_HW_Compatibility_Report_TransferMode

• ESM_SW_Compatibility_Report_TransferMode

1-18 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

• ESM_HW_Compatibility_Report_HTML_StyleSheet_Dataset

• ESM_SW_Compatibility_Report_HTML_StyleSheet_Dataset

• ESM_HW_Compatibility_Report_Excel_StyleSheet_Dataset

• ESM_SW_Compatibility_Report_Excel_StyleSheet_Dataset

• ESM_Compatibility_Report_Excel_Template_Dataset

• ESM_processor_direct_child_of_hardware

Setting Embedded Software Design Data Management preferences

• Add the SwDesignComp and SwDesignCompRevision objects to the ICS_classifiable_types

preference.

Setting Calibration and Configuration Data Management preferences

Set these preferences after installing Calibration and Configuration Data Management and before users
are given access to the system.

• ParmDefIntRevision.RENDERING

• datasetParmDefIntRevision.REGISTEREDTO

• ParmDefDblRevision.RENDERING

• datasetParmDefDblRevision.REGISTEREDTO

• ParmDefStrRevision.RENDERING

• datasetParmDefStrRevision.REGISTEREDTO

• ParmDefBoolRevision.RENDERING

• datsetParmDefBoolRevision.REGISTEREDTO

• ParmDefDateRevision.RENDERING

• datasetParmDefDateRevision.REGISTEREDTO

• ParmDefHexRevision.RENDERING

• datasetParmDefHexRevision.REGISTEREDTO

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 1-19

• ParmDefSEDRevision.RENDERING

• datasetParmDefSEDRevision.REGISTEREDTO

• ParmDefBCDRevision.RENDERING

• datasetParmDefBCDRevision.REGISTEREDTO

• ParmGrpValRevision.RENDERING

• datasetParmGrpValRevision.REGISTEREDTO

• ParmDefBitDefRevision.RENDERING

• datasetParmDefBitDefRevision.REGISTEREDTO

• ParmGrpDef.RENDERING

• datasetParmGrpDef.REGISTEREDTO

• ParmDef.RENDERING

• datasetParmDef.REGISTEREDTO

• ParmGrpDefRevision.RENDERING

• datasetParmGrpDefRevision.REGISTEREDTO

• ProductVariant.RENDERING

• datasetProductVariant.REGISTEREDTO

• ProductVariant.CREATERENDERING

• datasetProductVariantCreate.REGISTEREDTO

• ProductVariantIntent.RENDERING

• datasetProductVariantIntent.REGISTEREDTO

• ProductVariantIntent.CREATERENDERING

• datasetProductVariantIntentCreate.REGISTEREDTO

• Ccd0ColumnPreference

1-20 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

• CCDM_grp_rev_val

• TC_relation_required_on_export

• ParmGroup_Assigned_Hierarchy_Shown

• Parameter_Assigned_Columns_Shown

• Parameter_Available_Columns_Shown

• OverrideContRev_Assigned_Columns_Shown

• OverrideContRev_Available_Columns_Shown

• MemoryLayoutRevOrBlock_Assigned_Columns_Shown

• MemoryRecord_Assigned_Columns_Shown

• MemoryOverrideRecord_Assigned_Columns_Shown

• ConvOverrideRecord_Assigned_Columns_Shown

• ConvOverrideRecord_Available_Columns_Shown

Setting Teamcenter ClearCase Integration preferences

Set these preferences after installing the Teamcenter ClearCase Integration and before users are given
access to the system.

• SCM_ClearCase_Server

• SCM_ClearCase_UNCO_Keep_Version

• SCM_CheckIn_Identical_Version

Embedded Software Solutions interface

Overview of Embedded Software Solutions interface

There are some unique menu commands available when you install the licensed solutions.

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 1-21

Embedded Software Manager menus

Embedded Software Manager adds several menu commands to Structure Manager and My Teamcenter
as follows.

Applications Menus command Submenu command Description

Structure View→Embedded Software Embedded Shows associated

Manager Explorer→Show Associated software by
Uses
Software relations.
Used By

Structure View→Embedded Software Embedding Shows associated

Manager Explorer→Show Associated processors by
Accessed By
Processor(s) relations.
Gateway

Structure Tools→Embedded Software Processor Associates software

Manager Manager→Associate either to a processor
Software
Software to or to another
software.

Structure Tools→Embedded Software Gateway Associates processor

Manager Manager→Associate to a gateway.
Processor to

Structure Tools→Embedded Software Software Removes association

Manager Manager→Remove between two
Software Association associated software.

Structure Tools→Embedded Software Software Removes association

Manager Manager→Remove between processor-
Gateway
Processor Association gateway and
processor-software.

My Teamcenter Tools→Embedded Software Hardware-Software Checks hardware-

Manager→Compatibility software
Software-Hardware
Reports compatibility.

Embedded Software Design Data Management menus

Embedded Software Design Data Management adds several menu commands to Structure Manager and
My Teamcenter as follows

1-22 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

Application Menu command Description

My Teamcenter File→New→Software Design Creates a new software design

Component component

Structure Manager File→New→Software Design Creates a new software design

Component component

Calibration and Configuration Data Management menus

Calibration and Configuration Data Management adds several menu commands to Structure Manager,
My Teamcenter and Platform Designer, as follows.

Application Menu command Description

My Teamcenter File→New→Parameter Creates a parameter definition,

Management parameter group definition, or
parameter value group.

My Teamcenter File→New→Parameter Creates a parameter definition.

Management→Parameter
Definition

My Teamcenter File→New→Parameter Creates, revises, updates, and

Management→Parameter deletes the parameter definition
Definition Group group.

My Teamcenter File→New→Parameter Creates, revises, updates, and

Management→Parameter Value deletes the parameter value
Group group.

My Teamcenter File→New→Product Variant Creates a product variant object.

My Teamcenter File→New→Product Variant Intent Creates a product variant intent

object.

Structure Manager File→New→Parameter Creates, revises, updates, and

Management→Parameter deletes the parameter definition
Definition Group group.

Structure Manager File→New→Parameter Creates, revises, updates, and

Management→Parameter deletes the parameter definition.
Definition

Platform Designer File→New→Architecture Creates a parameter breakdown.

Breakdown

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 1-23

ClearCase Integration menus

The ClearCase Integration interface has some unique menu commands, which appear in the
Organization application and in My Teamcenter.

Application Menu command Description

Organization Tools→Verify ClearCase Connectivity Verifies that ClearCase is

connected to Teamcenter.

My Teamcenter File→New→SCMVersionObject Creates a new

SCMVersionObject.

My Teamcenter Edit→User Setting→SCM Workspace Displays SCM workspace

options.

My Teamcenter Tools→Check-In/Out→Check-Out Checks out SCMVersionObject.

My Teamcenter Tools→Check-In/Out→Check-In Checks in SCMVersionObject.

My Teamcenter Tools→Check-In/Out→Cancel Check-Out Cancels SCMVersionObject

checkout.

Understanding Embedded Software Solutions

Basic concepts about Embedded Software Solutions

Embedded software runs on systems that interact with the physical world in real time. These systems
are referred to as embedded systems. Embedded systems are used to control and monitor the operation
of machinery and can be found in a variety of applications. These embedded systems are becoming
complex and are increasing in size and sophistication. They are made up of many hardware and
software components. Most of these components are inter-related. For example, software resides on a
processor, or a software component depends on other software for execution, or a hardware
component may depend on another hardware component for activation, and so on.

Software for embedded systems is developed using reusable components that can be tracked against a
precise source code version. To allow the reuse of the same software binaries in different product
variants, the parameters are calibrated and configured after the binaries are generated.

Managing embedded systems using Embedded Software Solutions

With the increasing complexity of embedded systems, the management of enormous amounts of
product data is crucial. The product structure with all the embedded components and their unique
attributes and relations is preserved, reused, and managed in an embedded system. It is vital to have a
data management system that allows the configuration of embedded components with their attributes
and manages the dependencies and changes among embedded components and systems. It should also
provide a list of compatible components for any given embedded component.

1-24 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

Teamcenter has powerful features to design and manage complex product structures. Using Embedded
Software Solutions, you can create custom embedded hardware components like processors, embedded
software components such as calibration, bootloaders to enable flashing, and software binaries. You can
manage software design components as self-contained entities that represent a particular design and
related parameters (for example, source code) of a released software element. With Embedded Software
Solutions, you can also create relations between various embedded components such as processor and
software, software and software, and processor and processor, and so forth.

Embedded Software Solutions provide a reporting mechanism of compatible embedded components,

which allows you to get information about compatible and non-compatible hardware and software
components for any embedded software. This helps you to assess the impact of changes and to identify
possible changes.

This solution also allows external flashing applications to integrate with Teamcenter. You can download
the correct embedded software to the flashing station and then the flashing application can flash it to
the appropriate component of the embedded systems.

Calibration and Configuration Data Management allows you to manage dictionaries of embedded
software parameters that you can reuse in various products. You can create, manage, and reuse these
parameter values in different product variants. They can then be configured with the standard
Teamcenter configuration features to unambiguously identify the values for a given variant.

Working in a Multi-Site Collaboration environment

When you share product structures in a Multi-Site Collaboration environment, the following embedded
software objects can also be shared:

• Software item
When a user imports or exports an assembly that includes a software item, Teamcenter transfers the
associated relations (DependentOn, Embeds) and the associated secondary objects.

• Message
When a user imports or exports an assembly that includes messages, Teamcenter transfers the
associated relations (Source and Target control units, transmitter) and the associated secondary
objects.

• Processor
When a user imports or exports an assembly that includes a processor, Teamcenter transfers the
associated relations (Embeds and GatewayOf) and the associated secondary objects.

• Software design component

When a user imports or exports an assembly that includes a software design component, Teamcenter
transfers the associated secondary objects.

• CCDM object
When a user imports or exports an assembly that includes a CCDM object, Teamcenter transfers the
associated parameter definitions, parameter definitions, and parameter value groups

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 1-25

Remote users can modify shared structures only if they have the necessary access privileges.

Working with ECAD integrations

You can use both the Embedded Software Solutions and ECAD (Electronic Computer Aided Design)
integration functionality together in a common environment for managing information related to the
electronic and software components. Set the ESM_processor_direct_child_of_hardware preference to
false if you want to use Embedded Software Solutions and ECAD together.

Embedded Software Solutions deal with managing software and its dependency on other software and
hardware; ECAD deals with managing the hardware components of a control unit or programmable unit.

If you design the hardware and software as a package, you can leverage the following benefits:

• Manage hardware ECAD and software data together, referencing the EDA data from the embedded
software structure.

• Enable the validation of software on the hardware.

• Ensure concurrent and collaborative development of hardware and software.

For example, as a software designer, you must know the processor of the control unit hardware that
embeds the given software of the control unit. To provide this capability, Embedded Software Solutions
must model at least the processor and CPU of the hardware as shown in the following figure.

The hardware may be made up of several other components such as PCB, capacitors, and resistors.
These components are modeled as part of the ECAD solution as shown in the following figure.

1-26 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

If both Embedded Software Solutions and ECAD solutions are deployed, the hardware can be expanded
to show the detailed components that come from the ECAD solution and software designers can embed
the software to the processor under the hardware. In this case, the ESM_processor_type preference
must be configured to the item type used by the ECAD solution to represent the processor. The resulting
structure looks like the example shown in the following figure.

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 1-27

Basic tasks using Embedded Software Solutions

With Embedded Software Solutions, you can:

• Configure various embedded components and manage the associations among them and with other
systems.

• Design the embedded components with corresponding compatible devices with ease as the
compatible devices for any embedded components are listed. Also, if an embedded component needs
to be replaced with a new one, designers can validate the dependent components through
compatibility checking.

• Perform a quick impact analysis of interdependent components. Impacted components can be

identified in the early stages of design. This reduces the number of recalls associated with embedded
systems of any product.

• Store and retrieve the embedded systems information in a PLM environment. You can revise, check
out, check in, and release the individual embedded systems, thus enabling the comprehensive data
management capabilities for embedded components.

• Configure hardware and software parts separately or as part of the same structure.

• Configure the embedded system in the context of the overall product.

• Manage volumes of messages and signals in networks and associate them with embedded devices
within a single source of information.

• Manage repository of reusable software components.

• Determine the compatible network components of any message.

• Share embedded network systems data across manufacturers, suppliers, and vendors. This ensures
seamless transfer of embedded systems data and communication about modifications to any of the
components.

• Manage reusable calibration and configuration data of embedded systems.

• Manage parameter dictionaries for use in multiple products.

• Set values for parameters and modify and delete them.

• Manage design data (source code, models, object files, and third-party libraries) of embedded
software components.

• Create, update, and delete software design data components.

1-28 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

• Associate specifications, source code, and test cases to software design data components, and define
dependencies between different software design data components.

• Associate a software design data component to a software binary.

• Create a composition of the software design component.

• Configure, track, and control all hardware and software components that comprise your product and
their related product/process definitions.

• Manage references to the ClearCase version object and use Teamcenter for product modeling,
workflow, and process management.

• Check out, check in, and create a workflow process.

• Provide access to ClearCase from Teamcenter.

• Manage traceability to the source code from the software binary part of a product. This is helpful in
assessing the impact of changes and identifying the source code to change for a particular issue of a
software binary.

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 1-29

1-30 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

© 2020 Siemens
2. Managing the system design process
Overview of managing the system design process
Before using the Embedded Software Solutions, the Teamcenter administrator creates the necessary
projects and assigns user groups to them. The Organization application allows you to create projects and
groups and then assign groups or individual users to each project.

After setting up the projects, you can proceed to:

1. Create and manage the functional design.

2. Create and manage the product architecture.

3. Distribute functions across control units in the product architecture.

4. Create and manage signals and messages and define dependencies.

Functional design management

To build and manage the functional model of a system, the system engineer creates functions,
decomposes them into further subfunctions, and then defines the dependencies between these
functions.

Product electronic architecture management

Overview of product electronic architecture management

Typically, a system engineer follows this process to create the overall product architecture:

• Identifies the number of control units needed and creates them within the product.

• Identifies messaging protocols.

• Creates the required networks and associates control units to the network.

• Distributes functions across the control unit network.

• Defines dependencies between control units.

• Identifies the signals that are consumed and transmitted as part of each frame.

• Assigns each control unit to a design engineer for detailed design work.

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 2-1

Creating control units

Overview of creating control units

To start with, you must identify the number of control units you need in a given product architecture
and either find them for reuse or create them.

To create a control unit you must:

1. Create a control unit item.

2. Create hardware corresponding to the control unit.

3. Create processor related to the hardware of the control unit.

4. Create ports of the hardware.

In all these steps you can either search for existing objects or create a new object.

Create a control unit

1. Choose File→New→Item.
The New Item dialog box appears.

2. Select the appropriate item type that represents the control unit part at your site.

Note:
Teamcenter does not provide a specific default item for control units.

Create hardware

1. Choose File→New→Item.
The New Item dialog box appears.

2. Select the appropriate item type that represents the hardware to be used in a given control unit
part at your site.

Note:
Teamcenter does not provide a specific default item type for hardware to be used in control
units.

3. Add the hardware as a child of the control unit:

2-2 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

a. Copy the hardware to the clipboard.

b. Send the control unit to Structure Manager.

c. Select the control unit and choose Edit→Paste.

Create processor under control units

1. Choose File→New→Item.
The New Item dialog box appears.

2. Select Processor as the item type or a type that was configured to represent a processor while
configuring Embedded Software Manager.
The New Processor dialog box appears.

3. Enter the processor name and description, and click OK or Apply.

Teamcenter creates the new processor.
If the processor is linked to the network, the linked attribute should be set to True.

Note:
You can click Next to define the master form attributes and assign the processor to a project.

4. Add the processor as a child of the hardware in the control unit:

a. Copy the processor the clipboard.

b. Send the control unit to Structure Manager.

c. Select the hardware under the control unit and choose Edit→Paste.

To set the processor ID, enter the processor identifier by double-clicking the Occurrence Name cell and
typing the appropriate value or defining another processor (a gateway) through which the processor is
accessed. You can map the processor identifier to the occurrence note by creating an occurrence note
type and setting the processor ID using this note type; alternatively, you can map the processor ID to the
absolute occurrence ID.

Create ports for the hardware of control units

1. Choose File→New→Interface Definition.

2. Select Connection Terminal as the type.

3. Copy the ports created in My Teamcenter to the clipboard and send the control unit containing the
hardware to Structure Manager.

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 2-3

4. Select the hardware BOM line in Structure Manager, copy the objects from the clipboard, and paste
them here.

Create control unit topology

1. Choose File→New→Item.
The New Item dialog box appears.

2. Select the appropriate item type that represents the electronic architecture of the product at your
site.

Note:
Teamcenter does not provide a specific default item type for representing the electronic
architecture of the product.

Next, create the connection objects for establishing connectivity of the control units.

Create connection object representing a network

1. Choose New→Connection→Revisable.

2. Select the Connection item type for each type of network for the product.

To use these connections to model connectivity between the control units, you must put them in the
product structure of the control unit topology at the same level as the control units.

Associate control unit as a child of the electronic architecture

1. Select the item representing the electronic architecture of the product and send it to Structure
Manager.

2. Search for the required control units and copy them to the clipboard.

3. Select the top line in Structure Manager and choose Edit→Paste.

4. Search for the required connection objects and copy them to the clipboard.

5. Select the top line in Structure Manager and choose Edit→Paste.

The electronic architecture of the product is updated to include all required control units and connection
objects. Next, you must establish connectivity between the control units.

2-4 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

Associating ports of control units to the connection object representing the

network

In the electronic architecture of the product, control units that must be connected by the same
connection are connected by:

1. Selecting the port of the control unit's hardware.

2. Selecting the connection object and then associating the ports created under the control unit to
the connection object representing the network, by choosing Edit→Connect.

Next, you must establish dependency between the processors to capture how a processor of one control
unit is accessed through a processor of another control unit on the network.

Create processor dependency

You can access other processors within the same control unit or across several control units through a
gateway processor. A gateway processor has the isGateway attribute set to True.

1. In Structure Manager, select each of the processors that you want to associate with the gateway
processor and copy them to the clipboard.

2. Select the gateway processor and choose Tools→Embedded Software Manager→Associate

Processors To→Gateway.
Teamcenter associates all the processors you copied to the clipboard with the gateway processor.

View the processors accessed through a gateway processor

1. In Structure Manager, select the gateway processor.

2. Choose View→Embedded Software Explorer→Show Associated Processor(s)→Accessed By.

Teamcenter highlights the gateway processor and all processors accessed through it.

View the gateway processor associated with a processor

1. In Structure Manager, select the processor.

2. Choose View→Embedded Software Explorer→Show Associated Processor(s)→Gateway.

Teamcenter displays the processor and its gateway processors in the product structure.

Remove the gateway processor associations from a processor

1. In Structure Manager, select the gateway processor in the product structure.

2. Choose Tools→Embedded Software Manager→Remove Processor Associations.

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 2-5

Teamcenter displays the Remove Processor Association dialog box, listing all processors accessed
through the selected gateway processor.

3. In the dialog box, select all the accessed processors for which you want to remove the association
with the selected gateway processor and click Remove.
Teamcenter removes the selected associations.

Distributing functions across control units

When the system engineer distributes the functions identified for the product across different control
units, you can use allocations to allocate functions from the functional model to the control units in the
control unit structure. Allocations can be made programmatically or manually with the Multi-Structure
Manager application.

Signal management

Overview of signal management

The system engineer creates and associates messages and signals when building the structure of the
control units. The messages and signals exchanged between control units result from how the functions
are distributed across the control units. Use this information to identify the dependencies between
control units and to assist in managing the communication matrix.

Create messages and signals

1. Choose File→New→Signal.

2. Choose the appropriate type of signal (Message or Signal).

The New Signal dialog box appears.

3. Enter an ID, revision, name, and description for the signal.

4. Click Finish. Teamcenter creates a new signal of the specified type.

Note:
You can click Next to define other attributes of the signal and assign it to a project.

Associate messages to control units

1. In the product structure, select a message and one or more objects of the appropriate type, such as
a control unit item for a message or a port for a signal. The valid appropriate types are configured
in the following preferences:

• SIG_asystem_source_rules

2-6 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

• SIG_asystem_target_rules

• SIG_asystem_transmitter_rules

• SIG_pavriable_rules

• SIG_redundant_rules

2. In Structure Manager, choose Tools→Signal Manager→Associate Signal To and then choose one
of the following menu commands:

• Source
The object is the source, transmitter, or origin of the signal.

• Target
The object is the target, receiver, or destination of the signal.

• Transmitter
The object carries the message/signal. Select a connection or its subtype with the signal or the
message. The selection of any other object is invalid in this role.

• Process Variable
The process variable associated with the signal. Select the process variable with the signal.

• Redundant Signal
The signal is redundant. Copy the redundant signal to the clipboard, select the primary signal to
associate with the copied redundant signal, and choose the Tools→Signal Manager→Associate
Signal To→Redundant Signal menu command.

Teamcenter associates the signal and object.

Note:
My Teamcenter creates signal definitions and provides signal-related definition information. These
signal objects can now be reused in multiple designs by including the signal in a given structure.
In the context of the structure, the signal can then be associated to source transmitter and target
receiver objects. Teamcenter creates these relations in a given context, so that you do not need to
revise the signal even if the source/target objects change from one structure to another.
By including the signal in the structure, you can apply various configurations to the signal and also
use them in fine-grained allocation in context of a given structure.

Associate signals to ports of control units

1. In Structure Manager, select the signal and port of the control unit that you created.

2. Choose Tools→Signal Manager→Associate Signal to→Source.

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 2-7

Associate messages to connection

1. In Structure Manager, select the message that you created.

2. Select the connection object.

3. Choose Tools→Signal Manager→Associate Signal to→Transmitter.

View associations of a signal

1. In Structure Manager, select the signal in the product structure.

2. Choose View→Signal Explorer and then choose one of the following menu commands:

• Source

• Target

• Transmitter

• Process Variable

• Redundant Signal

Teamcenter displays the appropriate associated objects depending on the selected option for the
signal.

View received and transmitted signals

1. In Structure Manager, select the object whose signals you want to view.

2. Choose View→Signal Explorer→Show Signals→Received to view signals received by the object.

Choose View→Signal Explorer→Show Signals→Transmitted to view transmitted messages.
Teamcenter displays the object and signals of the chosen type in the product structure. If you select
a control unit and choose Show Source, Teamcenter displays the control units that transmit
messages for which the selected control unit is a target. Similarly, if you choose Show Target,
Teamcenter highlights control units that are targets of messages of which the selected control unit
is a source.

Remove associations from signals

1. In Structure Manager, select the signal in the product structure.

2. Choose Tools→Signal Manager→Remove Signal Association and then choose one of the
following menu commands:

2-8 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

• Source

• Target

• Transmitter

• Process Variable

• Redundant Signal

Teamcenter displays the Remove Signal Association dialog box containing all the associations of
the selected type for the signal, if there is more than one.

Note:
In the case of a process variable, the Remove Signal Association dialog box is not displayed
and the association between the process variable and the signal is removed immediately.

3. Select the required association and click Remove.

Teamcenter removes the selected association from the signal.

Dependency management

Overview of dependency management

Typically, the design engineer uses the following process to create software data and model
dependencies:

• Creates application software, calibration software, and bootloader software types and adds them
under the control unit item.

• Embeds the different software items of the control unit into the processor of the control unit
assembly hardware component.

• Creates the following software dependencies:

• Associates the calibration software to the application software binary.

• Associates the application software binary to other application software binaries. This dependency
may be useful to service personnel, for example, when a vehicle is serviced. If a problem is
identified in one of the control units, the technician may decide to flash the latest version of the
application software onto the control unit. However, the latest version of the software may work
only with specific versions of software on other control units. Consequently, these dependent
control units are affected by the change to the faulty control unit. To identify this change, the
technician must know the other software in the assembly that is affected by changes to the

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 2-9

updated software, so the corresponding control units can be identified and updated at the same
time.

Establish software to hardware dependency

You can associate a software item of any type with one or more processors. To associate a software item
to a processor, ensure the following criteria are met:

• The parent of the software item must be the same as some ancestor of the processor item.

• The processor must be a direct child of hardware if the value of the

ESM_processor_direct_child_of_hardware preference is true. If the value is false, then the processor
can be some child of a hardware and does not have to be direct child.

1. In Structure Manager, select the software item and the processor to which you want to associate.

2. Choose Tools→Embedded Software Manager→Associate Software To→Processor.

Teamcenter associates all the software items with the processor through an Embeds relationship.

Establish software to software dependency

You can associate one or more software items of any type with another dependent software item.

1. In Structure Manager, select each of the software items that depend on a given software and copy
them to the clipboard.

2. Select the software item on which the other software types selected in step 1 depend and choose
Tools→Embedded Software Manager→Associate Software To→Software.
Teamcenter associates all the software items you copied to the clipboard with the software item on
which the items on the clipboard depend via a DependentOn relation.

Establishing control unit to control unit dependency

You can manage and define dependency between control units by two mechanisms:

• You can define and manage the messages that are transmitted between two control units by using
the out-of-the-box message data type that is transmitted over a connection. The message has a
source defined as the source control unit and a target defined as the target control unit using the
signal manager functionality.
To identify the dependent control unit for a given control unit, you can select the control unit and use
signal explorer to identify the target and source control units.

• The other form of dependency is through software. Software flashed on one control unit can depend
on software flashed on another control unit.
When a change is being made to a software on a control unit, you can select the software on that
control unit in the Structure Manager and choose View→Embedded Software Explorer→Show

2-10 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

Associated Software→Used By to see which software is dependent on the selected software and
which other control units use the selected software.

View the processors associated with a software item

1. In Structure Manager, select the software item in the product structure.

2. Choose View→Embedded Software Explorer→Show Associated Processor(s)→Embedding.

Teamcenter highlights the software item and all the processors on which the selected software is
embedded.

View the software associated with a software item

1. In Structure Manager, select the software item in the product structure.

2. Choose View→Embedded Software Explorer→Show Associated Software and then choose

Uses or Used By menu command, as appropriate.
Teamcenter highlights the software item and all the software in which the software item is used or
on which it depends.

Remove software associations from a processor

1. In Structure Manager, select the processor in the product structure.

2. Choose Tools→Embedded Software Manager→Remove Software Association.

The Remove Software Association dialog box appears, listing all associated software items.

3. In the dialog box, select all the software items that you want to dissociate from the processor and
click Remove.

Remove associations between software items

1. In Structure Manager, select the software item on which other software items depend in the
product structure.

2. Choose Tools→Embedded Software Manager→Remove Software Association.

The Remove Software Association dialog box appears, listing all associated software items.

3. In the dialog box, select all the software items that you want to dissociate from the software item
and click Remove.

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 2-11

2-12 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

Overview of managing Calibration and Configuration Data

The Calibration and Configuration Data Management (CCDM) solution allows you to manage the
calibration and configuration-related parameter data of embedded systems. You can define, create,
view, update, and delete parameter data. You can also group related parameter definitions together and
associate parameter values to a project. Using existing Teamcenter applications, such as Structure
Manager, My Teamcenter, and Platform Designer, you can create calibration and configuration
dictionaries and set up projects by instantiating the dictionaries. The hierarchy of parameter groups is
maintained and can be used to collect the applicable parameter values in specific projects, depending on
the features of the projects.

Calibration and configuration data are largely used to facilitate context-specific product deployment for
different countries, different customer usage, or simply to enable product configuration and calibration
through dealer and distributor services. Due to a rising complexity in products and a significant increase
in the number of variants to manage, the traditional ways of managing data is no longer viable.
Typically, one set of embedded software binaries is used by several variants to manage the variability of
the calibration and configuration parameters.

The CCDM solution introduces artifacts to manage all the calibration and configuration data in
Teamcenter. It introduces parameter definitions and allows you to group parameters and set values for
them. It also uses product variants to represent a given configuration of a product, system, or
component.

Note:
Stylesheet rendering view does not support CCDM objects.

You can use the CCDM solution to do the following basic functions:

• Manage parameters
Defining your parameters is integral to managing your calibration and configuration data. A
calibration and configuration parameter has several attributes that hold different information, like
name, size, valid values, value descriptors, and so forth. These attributes are defined and modified so
that the parameter definitions can be used in embedded software. Teamcenter allows you to create
parameter definition (ParmDef) objects and parameter definition group (ParmGrpDef) objects. These
objects provide definition to the parameters and help in grouping similar parameters.

• Manage parameter dictionaries

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 3-1

You can create a master dictionary of all groups. The master dictionary contains a hierarchical layout
of all groups across various projects. It serves as a template that can be used for instantiating groups
into individual projects. This ensures that definition data is carried forward into projects and the
projects use values that adhere to the specification data.
You use Platform Designer to create the master dictionary in one of two ways:

• Run a custom utility that takes the groups as input.

• Create the group definitions and associated parameter definitions in My Teamcenter. You can then
copy the group definitions into the master dictionary structure.

The master dictionary structure is created as a precise structure. A specific master dictionary revision
is associated with specific revisions of the definition groups that are themselves precise.
Consequently, a given revision of master dictionary structure only contains the revisions of those
parameters that are applicable for the particular revision of the dictionary. The master dictionary
hierarchy is based on the architecture breakdown.

• Manage conversion rules

The conversion rule management option allows you to create a conversion rule and associate it to a
parameter definition by defining the type, expression, and constants.

• Manage memory layout and memory blocks

• Set parameter values

Once the product hierarchy and product context are defined, you must set the parameter values. The
parameter value setting is done through the parameter value groups. You can create, revise, modify
and delete parameter values for projects.

Copying and pasting a CCDM table

The copy and paste feature simplifies the initialization process when creating or modifying a parameter
definition item and improves usability. It allows you to copy existing values from a single or multiple
table cells and paste them into the desired cells.

You can perform the following copy and paste operations:

• Copy and paste within the same CCDM table.

• Copy from a CCDM table and paste to a different type of CCDM table. For example, you can copy
values from the min CCDM table and paste them to the max CCDM table.

• Copy from a CCDM table and paste to a Microsoft Excel sheet.

• Copy from an Excel sheet and paste to a CCDM table.

3-2 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

Note:
When you are copying from an Excel sheet, consider the following points:

• If the Excel sheet contains only the values of the table, you must hide the description field of
the CCDM table before pasting. If the Excel sheet contains both values and descriptions, you
must unhide the description field so that the values and descriptions can be pasted
accordingly.

• In Excel, when you copy columns (or rows) that are not adjacent and paste them in a CCDM
table, all the cells between the columns (or rows) also get copied and pasted in the CCDM
table. For example, if you copy and paste column 1 and column 3, column 2 also gets copied
and pasted in the CCDM table.

• In the ParmDefSed type table, when you copy one row from an Excel sheet, you can paste it
to only one row in the ParmDefSed table. Only one row is pasted even if you select multiple
rows for the operation.

• Copy from the ParmDef_1 CCDM table and paste into the ParmDef_2 CCDM table.

• Copy from the ParmVal_1 CCDM table and paste into the ParmVal_2 CCDM table.

• Copy from the ParmDef_1 CCDM table and paste into the ParmVal_1 CCDM table.

• Copy once and paste multiple times to these different targets.

Note:
When you paste cells into a selected table area that has a different size or shape (different in
the number of columns and/or rows) than the copied ones, the values are rearranged to fit the
target cells.

You can copy and paste values by first selecting the cells, then pressing the Ctrl+C key, and finally, the
Ctrl+V key. You can also right-click the CCDM table to get the shortcut menu. The options in the shortcut
menu are listed in the table below.

Menu Description

Copy Copies the selected cells in the table. If the Show Value
Description check box is selected, the value as well as the
description is copied. If the Show Value Description check
box is cleared, only the value is copied.

Paste Pastes the contents from the clipboard to the desired cells. If
the Show Value Description check box is selected, both the
value as well as the description are pasted. If the Show

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 3-3

Menu Description

Value Description check box is cleared, only the value is

pasted.

Clear Resets the cells to empty. If the Show Value Description

check box is selected, it overwrites the values as well as the
descriptions. If the Show Value Description check box is
cleared, it modifies only the values.

Note:
For ParmDefBool, it changes the values to False.

Undo Restores the table to the previous state, before the change.
Once this function is invoked, this menu is disabled. The
menu is enabled again, if you paste or make manual
modifications.

Next Error Searches for the next cell with an invalid value, starting
from the current cell selection. If the search reaches the end
of the table, it restarts the search from the beginning of the
table. This menu is enabled when invalid values exist in the
CCDM table.

Previous Error Searches for the previous cell with an invalid value starting
from the current cell selection. If the search reaches the
beginning of the table, it restarts the search from the end of
the table. This menu is enabled when invalid values exist in
the CCDM table.

After you paste the values, check that all values are valid. The system highlights all invalid values, such
as incorrect type and values out of range, less than the minimum, or more than the maximum. A
notification informs you that there are invalid values and gives you the option to undo the paste
operation. If you ignore the undo option, you cannot undo the paste operation at a later time and revert
the values.

Note:
Sometimes the CCDM table can be very large, and the invalid cells may not be in the visible area of
the table. In such cases, you should view the validation result at the top right corner, indicated by
icons.

Note:
A few important things that you must keep in mind about CCDM tables:

3-4 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

• The CCDM table has three different validators: the type validator, table validator, and panel
validator.
The type validator pairs the parameter definition to the input type. For example, for HEX values,
you can only enter values from 0–9 and A–F.
The table validator is responsible for the logic validations. For example, to validate whether the
initial, minimum, and maximum values comply with each other, the table must fulfill the
condition min<=init<=max.
The panel validator validates whether the CCDM tables of the parameter definition contain
errors (wrong or missing values).

• You can edit the CCDM table either by double clicking or by pressing the spacebar and the F2
key.

• If you want to copy from a text file to a CCDM table, press the Tab key to separate cells and
columns in the same line or row and press the Enter key to separate lines or rows.

Stretching a CCDM table

The table stretch feature improves usability and enables the CCDM table to provide enhanced support
for large parameters by allowing you to stretch or collapse a CCDM table, that has the same value in all
the cells. This offers a simplified initialization and editing process for parameter definition items.

You can enter the value in a particular cell of a collapsed table, and it automatically populates the same
value in the entire table. You can stretch and collapse the table by selecting or clearing the Collapse
check box.

Note:
By default, if the values in the cells are the same, the CCDM table of a parameter definition item is
collapsed. An error message is displayed if you try to collapse a CCDM table that doesn’t have the
same values in all the cells. The CCDM table is not in the collapsed state for the same value during
creation. It is only seen in the Viewer pane or the Properties page after the object is created.

The following parameter definition items are supported in the CCDM table stretch feature:

• ParmDefBCD

• ParmDefHex

• ParmDefDbl

• ParmDefInt

• ParmDefStr

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 3-5

• ParmDefBool

• ParmDefDate

The following parameter definition items are not supported in the CCDM table stretch feature:

• ParmDefBitDef

• ParmDefSED

Working with parameter definitions

Overview of working with parameter definitions

Parameter definitions provide a definition of your embedded software parameters within Teamcenter.
Once created, you can manage parameters by tracing their history of modifications, perform
modifications, put them through workflows, attach release status, manage and group these parameters
for use in other projects and in the master dictionary, which contains the hierarchical layout of all groups
across various projects.

You can create parameter definition objects for the following specific data types:

Data type Teamcenter type

Integer ParmDefInt

Double ParmDefDbl

String ParmDefStr

Boolean ParmDefBool

Date ParmDefDate

Hex ParmDefHex

SED ParmDefSED

BCD ParmDefBCD

BitDef ParmDefBitDef

Object creation support single value, simple one dimensional array values, and two dimensional array
values.

Create a parameter definition

1. From My Teamcenter, choose File→New→Parameter Management→Parameter Definition.

The New Parameter dialog box appears.

3-6 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

2. Select the parameter type that you want to create from the list displayed.

3. Click Next.

4. Enter the following additional parameter information:

• ID

• Name

• Revision ID

• Description (optional)

• Unit of measure (optional)

5. Click Next.

6. Enter the Parameter Type and any comment.

Caution:
Once you have specified the parameter type and Teamcenter has created the object, you
cannot change the type.

7. Click Next.

8. Enter the additional parameter revision information:

• If you are creating a parameter definition of Integer type, enter Descriptor, Parameter Type,
Size Units, Size, Rows, Columns, minimum values, maximum values, and initial values.
Optionally, you can also enter values for isSigned, Resolution Numerator, and Resolution
Denominator.
Teamcenter checks the values entered are valid. If invalid values are entered, an error message
identifies the invalid value and the reason it is invalid.

Note:
For an Integer single valued parameter, type 1 as the value for Rows and Columns.
For an Integer 1-D array valued parameter, type 3 for Rows and 1 for Columns, assuming
that you are creating a 1-D array of size 3.
For an Integer 2-D array valued parameter, type 2 for Rows and 3 for Columns; a 2 X 3
matrix of values is required.

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 3-7

• If you are creating a parameter definition of type Boolean, enter Size Units, Size, Rows,
Columns, and optionally enter the row and column headers and Initial Values.

Note:
For a Boolean single valued parameter, type 1 as the value for Rows and Columns.
For a Boolean 1-D array valued parameter, type 1 for Rows and 2 for Columns, assuming
that you are creating a 1-D array of size 3.
For a Boolean 2-D array valued parameter, type 2 for Rows and 2 for Columns; a 2 X 3
matrix of values is required.

• If you are creating a parameter definition of type BitDef, enter values for Parameter Descriptor
and Size in Bytes.
Depending on the size of the bytes, the dialog box gets updated, to allow you to enter details
like Name and a value for what 0 or 1 represent in each bit in the byte.

• If you are creating a parameter definition of type Hex, enter values for Parameter Descriptor,
Parameter Type, Size Units, Size, Rows, Columns, and minimum, maximum and initial values.
Optionally, you can also enter the row and column headers.

Note:
For a Hex single valued parameter, type 1 as the value for Rows and Columns.
For a Hex 1-D array valued parameter, type 3 for Rows and 1 for Columns, assuming that
you are creating a 1-D array of size 3.
For a Hex 2-D array valued parameter, type 2 for Rows and 3 for Columns; a 2 X 3 matrix
of values is required.

• If you are creating a parameter definition of type BCD, enter values for Parameter Descriptor,
Parameter Type, Size Units, Size, Rows, Columns, and minimum, maximum and initial values.
Optionally, you can also enter the row and column headers.

Note:
For a BCD single valued parameter, type 1 as the value for Rows and Columns.
For a BCD 1-D array valued parameter, type 3 for Row Label and 1 for Column Label,
assuming that you are creating a 1-D array of size 3.
For a BCD 2-D array valued parameter, type 2 for Rows and 3 for Columns; a 2 X 3 matrix
of values is required.

• If you are creating a parameter definition of type SED, enter the Parameter Descriptor,
Parameter Type, Size Units, Size, and Rows. Additionally, you can define valid values and initial
values. For each state in the valid values, you can enter either the domain element or the value.

3-8 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

Note:
For an SED single valued parameter, type 1 as the value for Row Label.
For an SED 1-D array valued parameter, type 3 for Row Label, assuming that you are
creating a 1-D array of size 3.

• If you are creating a parameter definition of type Date, enter the Parameter Descriptor,
Parameter Type, Size Units, Size, Rows, Columns, and minimum, maximum and initial values.
Optionally, you can also enter the table descriptors and values.

Note:
Minimum and maximum value validation is not applied to the Date type parameter.
For a Date single valued parameter, type 1 as the value for Rows and Columns.
For a Date 1-D array valued parameter, type 3 for Rows and 1 for Columns, assuming that
you are creating a 1-D array of size 3.
For a Date 2-D array valued parameter, type 2 as the value for Rows and 3 for Columns; a
2 X 3 matrix of values is required.

• If you are creating a parameter definition of type Double, enter the Parameter Descriptor,
Parameter Type, Size Units, Size, Rows, Columns, Tolerance, Precision, Resolution
Numerator, Resolution Denominator, and isSigned. Optionally, you can also enter the table
descriptors and values.
Precision and tolerance values are used for validations in rounding scenarios.

Note:
For a Double single valued parameter, type 1 as the value for Rows and Columns.
For a Double 1-D array valued parameter, type 3 for Rows and 1 for Columns, assuming
that you are creating a 1-D array of size 3.
For a Double 2-D array valued parameter, type 2 for Rows and 3 for Columns; a 2 X 3
matrix of values is required.
Resolution evaluated from Resolution Numerator and Resolution Denominator is used
in validating that the minimum, maximum, and initial values are entered such that:

• At least one increment based on resolution is possible between minimum and

maximum.

• Initial value is an absolute increment of the resolution to the minimum value and within
the specified tolerance. While evaluating tolerance the number of fractional digits used
is driven based on the information provided in the Precision box.

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 3-9

• If you are creating a parameter definition of type String, enter the Parameter Descriptor,
Parameter Type, Size Units, Size, Rows, Columns, and initial values. Optionally, you can enter
the minimum and maximum value, the table descriptors and values.

Note:
For a String single valued parameter, type 1 as the value for Rows and Columns.
For a String 1-D array valued parameter, type 3 for Rows and 1 for Columns, assuming
that you are creating a 1-D array of size 3.
For a String 2-D array valued parameter, type 2 for Rows and 3 for Columns; a 2 X 3
matrix of values is required.

9. Click Finish.

The parameter definition is created with the type you selected.

Save a parameter definition

1. In My Teamcenter, select the revision or the item corresponding to the parameter definition object.

2. Choose File→Save As.

The Save As dialog box appears.
If you select an item, you must select the revision also.

3. Enter values in the Item ID, Revision ID, and Name boxes.

4. Click Finish.

A new item of the existing parameter definition object is created. It carries forward all the information
from the previous revision. Now, you can modify attributes like size, rows, column values.

Revise a parameter definition

1. In My Teamcenter, select the revision of the parameter definition object.

2. Choose File→Revise.
The Revise dialog box appears.

3. Enter the new ID in the Revision ID box.

4. Click Finish.

A new revision of the existing parameter definition object is created. It carries forward all the
information from the previous revision. Now, you can modify any attributes like size, rows, and columns
values.

3-10 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

Edit a parameter definition

1. In My Teamcenter, select the parameter object you want to edit and choose Properties from the
shortcut menu.
The Properties dialog box appears.

2. Click Check-Out and edit to edit modifiable properties.

Note:
You cannot perform a cancel checkout operation on CCDM objects, as work-in-progress
history tracking is not enabled for CCDM objects. If you try to cancel a checkout, an error
message is displayed and the CCDM object does not revert to its original value.
To release a checkout lock, check in the CCDM object and if you need to change any previous
edits, check out the object, make the desired changes, and then check in the CCDM object
again.
To track work-in-progress history, lock the previous revision, create a new revision, and
modify the newly created revision.

3. Click Yes in the Check-Out dialog box.

You can now edit the Rows, Columns, Minimum Value, Maximum Value, and Initial Value
attributes.

Note:
If you are modifying a BitDef type parameter definition object, you can edit the Size in Bytes
and Name attributes, and the values for 0 and 1.

4. Click Save and Check-In.

Delete a parameter definition

1. In My Teamcenter, select the parameter definition object you want to delete.

2. Click Delete on the toolbar or choose Edit→Delete.

The Delete dialog box appears.

3. Click Yes to confirm.

The parameter definition object is deleted.

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 3-11

Working with the parameter definition group

Overview of working with the parameter definition group

The parameter definition group is required to group related parameter definitions and define the
parameter master dictionary and template. The parameter definition group object organizes the
parameters into various groups based on known usage of related parameters. However, when creating
the parameter definition group, you can specify what the object represents.

Parameter groups Purpose

Parameter Dictionary Manages the dictionary.

Parameter Breakdown Manages the parameter breakdown in a given project.

Organizational Group Manages group of parameters for organizational

purposes.

Packeted Parameter Manages an ordered group of parameters.

Parameter Group Manages a set of parameters that have value

assignment together.

Create a parameter definition group

1. In My Teamcenter, choose File→New→Parameter Management→Parameter Definition Group.

The New Definition Group dialog box appears.

2. Select the type of parameter definition group to create and click Next.

3. Enter values in the Item ID, Revision ID, Name, and Architecture Breakdown Element Id boxes
and click Next.

4. Select Parameter Group as the Represents value and click Finish.

5. Specify the control engineer, descriptor, specialist, and comment information for the parameter
definition group.

6. Click Finish.

Override the specialist attribute in a project

Before you the modify the specialist assignment at the project level, ensure that you have created a
custom form in My Teamcenter that has attributes of the same name and type as the one that needs to
be overridden from the master dictionary's definition group object.

3-12 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

1. Copy the form created in My Teamcenter that will override the ParmGrpDef attribute value from
the master dictionary. This form has the Specialist attribute set to the specialist to whom the
group’s parameter value assignment task needs to be set.

2. Select the project context in Platform Designer.

3. Select the ParmDefGrp object for which data is to be overridden.

4. Open the Data panel and select the Attachments tab.

5. Select the top-level node, which corresponds to the ParmGrpDefRevision object of the selected
ParmDefGrp object.

6. Choose Edit→Paste Special.

The Paste dialog box appears.

7. Select the StrObjAttrOverride relation and click OK.

The form with the override information is associated to the ParmGrpDefRevision object in context of
that project.

Save a parameter definition group

1. In My Teamcenter, select the revision or the item corresponding to the parameter definition group
object.

2. Choose File→Save As.

The Save As dialog box appears.
If you select an item, you must select the revision also.

3. Enter values in the Item ID, Revision ID, and Name boxes.

4. Enter a value for the new Architecture Element ID.

5. Click Finish.

A new item of the existing parameter definition group object is created. If the ValidateReUseInGroups
constant is configured as false for the parameter definition group, then on save as, the children from the
previous revision are carried forward to the new revision.

Revise a definition group

1. In My Teamcenter, select the definition group you want to revise.

2. Choose File→Revise.
The Revise dialog box appears.

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 3-13

3. Enter values in the Name and Description boxes and click Finish.

A new revision is created and if the group has parameter definitions, they are carried forward to the new
revision.

Edit a definition group

1. In My Teamcenter, select the definition group you want to modify and choose Properties from the
shortcut menu.
The Properties dialog box appears.

2. Click Check-Out and edit.

3. Click Yes in the Check-Out dialog box.

You can now make changes to the modifiable attributes.

Note:
You cannot perform a cancel checkout operation on CCDM objects, as work-in-progress
history tracking is not enabled for CCDM objects. If you try to cancel a checkout, an error
message displays and the CCDM object does not revert to its original value.
To release a checkout lock, check in the CCDM object and, if you need to change any previous
edits, check out the object, make the desired changes, and then check in the CCDM object
again.
To track work-in-progress history, lock the previous revision, create a new revision, and
modify the newly created revision.

4. Click Save and Check-In.

Add a parameter definition to a definition group

1. In My Teamcenter, select one or more parameter definitions to be added.

Note:
A parameter can be added to one group only. If you associate a parameter to a group, you
cannot associate the same parameter to another group.

2. Choose Edit→Copy.

3. Select the definition group to which you want to add the parameter definitions and choose Send
To→Structure Manager from the shortcut menu.

4. In Structure Manager, select the top line and choose Edit→Paste.

3-14 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

5. Click Save.
The parameter definitions are added to the definition group.

If a parameter is already used in another item of the same type, it cannot be added if the
ValidateReUseInGroups constant of the parent type is set to true.

The parameter is added to the group as a precise occurrence.

Remove a parameter definition from a definition group

1. In Structure Manager, open the parameter definition group from which a parameter definition
needs to be removed.

2. Select the parameter definition you want to remove.

3. Choose Edit→Remove.

4. Click Save.
The parameter definition is removed from the definition group.

Resequence parameter definition within a definition group

1. In Structure Manager, open the parameter definition group in which you want to resequence
parameter definitions.

2. Select the parameter definition you want to resequence.

3. Double-click the find number corresponding to the selected parameter definition and enter a new
find number.

Note:
If the selected parameter definition must be sequenced ahead of another reference
parameter definition object, enter a find number less than the find number of the reference
parameter definition.
If the selected parameter definition must be sequenced after another reference parameter
definition object, enter a find number greater than the find number of the reference
parameter definition.

4. Click Save.
The parameter definitions are resequenced within the definition group.

Delete a parameter definition group

1. In My Teamcenter, select the parameter definition group object you want to delete

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 3-15

2. Click Delete on the toolbar or choose Edit→Delete.

The Delete dialog box appears.

3. Click Yes to confirm.

The parameter definition group object is deleted.

Working with a master dictionary

Overview of working with a master dictionary

You can create a master dictionary of all groups. The master dictionary contains a hierarchical layout of
all groups across various projects. It serves as a template, which can be used for instantiating groups into
individual projects. This ensures that the definition data is carried forward into projects and the projects
use values that adhere to the specification data.

Create a master dictionary

1. In My Teamcenter, select the folder where you want to place the master dictionary.

2. Choose File→New→Parameter Management→Parameter Definition Group.

The Parameter Definition Group dialog box appears.

3. Select ParmGrpDef as the parameter definition group type and click Next.

4. Specify the values for Architecture Element ID and Name for the master dictionary and click Next.

5. Set the architecture breakdown properties and click Next.

6. Select Parameter Dictionary as the value in the Represents box and click Finish.

An empty master dictionary is created and placed by default in the New Stuff folder in My Teamcenter.
You can add the group definition revisions, which have been already created, to the master dictionary.
You can copy the group definition revisions from My Teamcenter and paste them into the master
dictionary in Structure Manager.

Note:
It is recommended that you do not add non-parameter definition objects under ParmGrpDef. You
can customize this by adding values which are either ParmDef or its sub-class to the
TCAllowedChildTypes_<ParmGrpDef or SubTypeName> preference.

3-16 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

Managing conversion rules

Overview of managing conversion rules

A conversion rule consists of specific algebraic formula, a list of constant values, and a list of variables. It
allows the system to convert the parameter values into ECU values automatically. According to the input,
the conversion rule evaluates the formula and returns a computed result. The conversion rule
management option allows you to create a conversion rule and associate it to a parameter definition by
defining the type, expression, and constants. You can modify, copy, paste, override, and delete the
conversion rule. The various steps in conversion rule management are depicted in the following figure.

There are four conversion types provided out of the box in Teamcenter:

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 3-17

Name Expression Constant Names Variable Names

Identical x {} {x}

Linear A*x+B {A, B} {x}

Quadratic Axx+B*x+C {A, B, C} {x}

Rational (Axx+B*x+C)/ {A, B, C, D, E, F} {x}

(D*x*x+E*x+F)

Define a conversion rule for parameter definition

1. Create a parameter definition and click Next after you have entered the additional parameters.
The Define Conversion Rule dialog box appears.

2. In the Name box, enter a name for the conversion rule.

3. In the Type box, select the conversion type.

4. In the Description box, enter a brief description of the conversion rule.

5. In the Constants box, specify the constant value.

Specify a number in decimal format for each constant. The value must be between -2^31 and
2^31–1.

Note:
If you select the conversion type as Rational, then D, E, and F should not be 0.

6. Click Finish.

Modify a conversion rule associated to a parameter definition

1. Modify the parameter definition as described in Edit a parameter definition.

2. In the Name box, enter a new name for the conversion rule.

3. In the Type box, change the conversion type.

For example, from Linear to Rational.

4. In the Description box, enter a brief description of the conversion rule.

5. In the Constants box, specify the constants value for the formula.

6. Click Save and Check-In.

3-18 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

Delete a conversion rule

1. Modify the parameter definition.

2. In the Type box, select Blank.

The conversion rule associated with the parameter definition is deleted. The parameter definition
does not have any conversion rule.

3. Click Save and Check-In.

Copy and paste a conversion rule to a parameter definition

1. In My Teamcenter, open the Properties dialog of the parameter definition you want to copy.

2. In the Define Conversion Rule pane, click the context menu and select Copy from the list
displayed.

3. Create a parameter definition and click Next after you have entered the additional parameters.
The Define Conversion Rule dialog box appears.

4. Click the context menu and select Paste from the list displayed.

5. Click Finish.

Note:
Similarly, you can copy a conversion rule and paste it when you are editing a parameter definition.
Also, when you copy and paste a conversion rule to a parameter definition, the system checks
whether the copied conversion rule can apply to the parameter type. If not, the system notifies
that the conversion type is not matched. A single conversion rule cannot be shared by different
parameter definitions.

Managing memory layout or memory block

Overview of managing memory layout or memory block

The memory management feature allows you to create memory layouts and blocks and assign
parameters to them using the Software Parameter Manager. Once you have the memory blocks, you can
edit them by assigning and removing parameters. You can also delete and copy blocks and override
addresses.

Create a memory layout and add a memory block

1. In My Teamcenter, select the dictionary or project for which you want to create a memory layout
and choose Send To→Software Parameter Manager from the shortcut menu.

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 3-19

The Software Parameter Manager appears with the dictionary or project and its memory layout.

2. Select the memory layout and choose Add→Memory Block from the shortcut menu.
A new memory block is created and added in the tree. Next, assign parameters to this block.

View, assign, and remove parameters from a memory block or memory

layout

1. In the Software Parameter Manager, select the memory block or memory layout you want to view
or assign parameters to.

2. View any assigned parameters in the Assigned Parameters tab in the right pane.
In context of a dictionary, there is just one group (group header is hidden) in the assigned
parameter view-Parameter Definition. In context of a project, there are two groups (group header
is visible) in the assigned parameter view-Parameter Definition and Override.
Under the Parameter Definition group, you can view the following parameter:

• Hierarchy displays the hierarchy of the corresponding memory layout or block.

• Object displays the assigned parameter name.

• Conversion Rule represents the formula expression of the associated conversion rule for the
assigned parameter.

• Minimum Values represents the parameter minimal value if any.

• Maximum Values represents the parameter maximal value if any.

• Initial Values represents the parameter initial value if any.

• Table Definition represents the parameter table definition if any.

• Valid Values represents the SED valid values.

• Initial Value represents the SED initial value.

• Bit Definition represents the BitDef definition.

• Start Address displays the start address of the corresponding memory layout/block.

Note:
This is the absolute address. Start address of a memory layout equals to its start address.
The start address for a memory block equals to the memory block offset address plus the
memory layout start address.

3-20 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

• Offset Address represents the offset address for the assigned parameter.

Under the Override group, you can view the following parameters:

• Revision displays the corresponding override container revision id if any.

• Offset Address displays the overridden offset address if any for the assigned parameter.

• Conversion Rule represents the formula expression of the overridden conversion rule for the
assigned parameter.

3. You can modify the columns and save the new configuration by right-clicking a column and
choosing Column from the shortcut menu.
The Column Chooser dialog appears for you to change the column configuration.

4. Click Done after making the changes and then click Save Column Configuration to save this
configuration for future.
To change the new column configuration, click Reset Column Configuration and reset the
columns to their default configuration.

5. After viewing the parameter, you can assign more parameters by selecting one or more parameters
from the Available Parameters tab.

6. Click Assign.
The selected parameters appear in the Assigned Parameter tab.

7. To remove a parameter, select the parameter in the Assigned Parameter tab and click Unassign.
This deletes the parameter records and memory override records, but keeps the formula override
record.

8. Click Save.

Edit memory layout or memory blocks

1. In the Software Parameter Manager, check out the memory layout you want to edit by choosing
Check-In/Out→Check Out from the shortcut menu.

2. If you are editing a memory layout revision, click the Viewer tab and edit these properties.

• Enter values in the Start Address and Mirrored Offset boxes in Hex format.

• Enter values in the Input Sources box. This represents the list of parameter files (datasets)
imported into this memory layout revision.

• Enter values in the Output Files box. This represents the list of parameter files (datasets)
exported from this memory layout revision.

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 3-21

• Click Check In.

3. If you are editing a memory block revision, select the memory block, click the Viewer tab and edit
these properties.

• Enter a value in the Start Address box in Hex format.

• Click Check In.

Copy a memory block or memory layout

1. In My Teamcenter, select the source dictionary whose memory block or layout you want to copy
and choose Send To→Software Parameter Manager from the shortcut menu.
The dictionary along with its memory layout and blocks appears in the Software Parameter
Manager.

2. In My Teamcenter, select the target dictionary to which you want to copy the memory block to and
choose Send To→Software Parameter Manager from the shortcut menu.
The dictionary along with its memory layout and blocks appears in the Software Parameter
Manager. You can see it below the source dictionary.

3. Navigate in the source dictionary memory layout and select the block you want to copy.

4. Choose Copy from the shortcut menu.

5. Select the target dictionary memory layout and select the correct parent.

6. Choose Paste from the shortcut menu.

The memory block along with its sub-blocks and parameter assignments are copied.

Note:
You cannot copy a memory layout and paste it under another memory layout.

Delete a memory block or memory layout

1. In the Software Parameter Manager, select the memory block or layout you want to delete.

2. Choose Delete from the shortcut menu.

This deletes the block or layout and its sub-blocks and unassigns any assigned parameters.

Note:
Even after the deletion, the parameters still remain in the database. If there are any overrides,
they are not deleted as the overrides could be authored by someone else.

3-22 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

Override address for parameter assignments

1. Select the memory block in which you want to override the parameter address.
The parameter details appear on the right pane under the Parameters tab.

2. Click Offset Address in the Override group, to make the box editable.

3. Enter the new offset address and click Save.

The first revision of the override is created and you can see this under Override Containers on the
left. This container contains all override-related information. You can select the override and view
the override record.

Override conversion rule

1. In My Teamcenter, select the project for which you want to override the conversion rule and
choose Send To→Software Parameter Manager from the shortcut menu.
The Software Parameter Manager appears with the project.

2. Check out the container revision if it already exists.

3. In the Assigned Parameters tab, find the row in the table where the parameter is located for
which you want to override the conversion rule.

4. Double-click the Conversion Rule cell you want to override.

The Define Conversion Rule dialog box appears.

5. Override the conversion rule by selecting the value to override and click OK.

6. Click Save and check in the container.

Note:
If the conversion rule being overridden is for an unassigned parameter, start by finding the
parameter in the Available Parameter box.

Managing parameter configuration and value setting

Overview of managing parameter configuration and value setting

Parameter value setting is an integral part of managing your calibration and configuration data. You can
start by creating project-specific breakdown and then specifying the values for each parameter.

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 3-23

for all parameters in a group by creating a parameter value group object. You can also revise and modify
the parameter value group to change the values of parameters. You also can attach the parameter value
group object to the definition group in the project specific breakdown using the add part to product
functionality.

Working with parameter configuration and value setting

Project-specific breakdown of parameters helps you to create an architectural breakdown of your project
at the project setup process and provides placeholders for parameter values. Parameter values can be set
for all parameters in a group by creating a parameter value group object. You can also revise and modify
the parameter value group to change the values of parameters. You also can attach the parameter value
group object to the definition group in the project specific breakdown using the add part to product
functionality.

Working with product variants

Overview of working with product variants

Product variants represent a given configuration of a product. It is part of the product planning process
and exists before you create the actual objects in building the product. It comprises the configuration
details of the product. The final configured product is based on the product variant configurations.

Teamcenter allows you to create product variants and product variant intent objects. When you create a
product variant object, you specify the product context and the configuration. When you create a
product variant intent object, you specify the product context intent for which you are creating a
product variant intent. The product variant captures the context and configuration of the product and
serves as a container for grouping together the various product variant intents.

Technically, the ProductVariant object is a subclass of the CCObject object, which is used in Teamcenter
to group together various structure context objects that reference product structures. The
ProductVariantIntent object is associated with the actual architecture breakdown structures. Therefore,
data stored against the ProductVariantIntent objects imply that data is stored against that particular
architecture breakdown structure.

The ProductVariantIntent object is a subclass of the StructureContext object that references the
architecture breakdown structure. The ProductVariantIntent objects are grouped together by the
ProductVariant object.

To use ProductVariant and ProductVariantIntent objects in data exchange using PLM XML, the product
context, configuration context, and the product context intent must already exist in the environment
prior to importing a PLM XML file, which has ProductVariant and ProductVariantIntent objects.

Before doing any of the following procedures, ensure you have created the product, set variability,
created NVEs, and added the relevant parts to the product.

3-24 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

For more information, see the Platform Designer.

Note:
Both, the ProductVariant and the ProductVariantIntent objects are not extensible.

Create a product variant

1. In My Teamcenter, select the product context that you want to use as the basis of the product
variant.

2. Create a configuration context object for the product context:

a. From My Teamcenter, choose File→New→Configuration Context.

The New ConfigContext dialog box is displayed.

b. Type values in the Name and Description boxes.

c. Select a value in the Revision Rule, Variant Rule, and Closure Rule lists.

d. Click OK.

3. In My Teamcenter, select the product context for which you want to create a product variant and
copy it to the clipboard.

4. Choose File→New→Product Variant.

The New Product Variant dialog box is displayed.

5. Type values in the Name and Description boxes.

6. Select Paste from the product context options.

7. Click Search next to the Configuration Context box to search for the configuration context you
created for the selected product context.

8. Click OK.

Save a product variant

1. In My Teamcenter, select the revision or the item corresponding to the product variant object.

2. Choose File→Save As.

The Save As dialog box appears.
If you select an item, you must select the revision also.

3. Enter values in the Item ID, Revision ID, and Name boxes.

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 3-25

4. Enter a value for the new Architecture Element ID.

5. Click Finish.

A new item of the existing product variant is created. However, the product variant intent associated
with the product variant is not carried forward to the new item. This is because one product variant
intent cannot be used in multiple product variants.

Edit a product variant

1. In My Teamcenter, select the product variant you want to edit and from the shortcut menu, choose
Properties.
The Properties dialog box is displayed.

2. Click Check-out and Edit to edit modifiable properties.

3. Click Yes to confirm.

You can modify the name and configuration context properties.

4. Click Save and Check in.

Note:
You cannot perform a cancel checkout operation on CCDM objects, as work-in-progress history
tracking is not enabled for CCDM objects. If you try to cancel a checkout, an error message displays
and the CCDM object does not revert to its original value.
To release a checkout lock, check in the CCDM object and, if you need to change any previous
edits, check out the object, make the desired changes, and then check in the CCDM object again.
To track work-in-progress history, lock the previous revision, create a new revision, and modify the
newly created revision.

Create a product variant intent

1. In My Teamcenter, select the product variant for which you want to create the product variant
intent.

2. Choose File→New→Product VariantIntent.

The New Product Intent dialog box is displayed.

3. Select ProductVariantIntent in the left pane.

4. Type values in the Name and Description boxes.

5. Select a value from the Product Context Intent list.

3-26 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

6. Click OK.

The product variant intent is created and associated with the product variant.

Edit a product variant intent

1. In My Teamcenter, select the product variant intent you want to modify and from the shortcut
menu, choose Properties.
The Properties dialog box is displayed.

2. Click Check-out and Edit to edit modifiable properties.

3. Click Yes to confirm.

You can modify the product context intent property.

4. Click Save and Check in.

Note:
You cannot perform a cancel checkout operation on CCDM objects, as work-in-progress history
tracking is not enabled for CCDM objects. If you try to cancel a checkout, an error message displays
and the CCDM object does not revert to its original value.
To release a checkout lock, check in the CCDM object and, if you need to change any previous
edits, check out the object, make the desired changes, and then check in the CCDM object again.
To track work-in-progress history, lock the previous revision, create a new revision, and modify the
newly created revision.

Create a project-specific breakdown

1. In Platform Designer, select the product context corresponding to which the project-specific
breakdown needs to be created.

2. Choose File→New→Architecture Breakdown.

3. Select ParmGrpDef and click Next.

4. Specify values for Name and Description, and click Assign.

5. Set the value of Represents to Parameter Breakdown and click Next.

6. Select the empty project-specific breakdown and click the split window button at the top-right
corner.
This splits the window in two parts with the project-specific breakdown in one pane.

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 3-27

7. Select the empty pane and search for the master dictionary that needs to be used for instantiating
the project breakdown.
You see the project-specific breakdown in the left pane and the master dictionary in the right.

8. Move either all or only the required group definitions under the master dictionary to the clipboard,
so that they can be instantiated into the project-specific breakdown.

9. Select the project specific breakdown and click Paste on the toolbar to paste the selected groups
into the project specific breakdown.
The Paste dialog box is displayed.

10. Select Process Parents to copy the complete parent structure.

Select Process Children to copy all the children of the selected element.

A project-specific breakdown is created, and the groups chosen by you are now a part of the project-
specific breakdown.

Note:
Generic breakdown is not supported for parameter breakdown.

Create a parameter value group

1. In My Teamcenter, choose File→New→Parameter Management→Parameter Value Group.

The New Parameter Value Group dialog box appears.

2. Select the type of group value and click Next.

3. Enter values in the Name, ID, and Revision boxes and click Next.

4. (Optional) Enter any additional information for parameter value and click Next.

5. (Optional) Enter any additional information for parameter value group revision and click Next.

6. Search for the project for which value needs to be defined.

The search results are displayed.

7. Select the project and click Next.

8. Choose the category for the product by selecting options under Architecture and Revision Rule.

9. Click Architecture Element ID.

The element is displayed.

10. Double-click the element to select it and click Next.

3-28 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

11. Select the parameter group definition revision from the breakdown and click Next.
The Parameter Table with all the parameters associated with the selected parameter group
definition is displayed.

12. Select a row specific to the parameter and double click the Actual Value cell. You can select only
one row and specify values for only one parameter at a given time.
The Enter Actual Values for Parameter dialog box appears, which shows user interface controls in
context of each data type, that you specified earlier as row and column descriptors.

13. Enter the values for each parameter and click OK.
The values get updated in the Actual Value cell as follows:

• Single values for all single values attributes.

• Comma-separated values for all simple array attributes, for example, 1,2,3,4.

• Combination of commas and brackets for 2D array attributes, for example, {1,2,3}, {4,5,6},
{7,8,9}. The row is represented by values within the brackets.

• A concatenated bit stream is displayed for the BitMap type.

14. Click Finish.

A parameter value group is created and values are set for each parameter.

Note:
You can avoid steps 6 through 11 by using a custom constructor.

Save a parameter value group

1. In My Teamcenter, select the revision or the item corresponding to the parameter value group
object.

2. Choose File→Save As.

The Save As dialog box appears.
If you select an item, you must select the revision also.

3. Enter values in the Item ID, Revision ID, and Name boxes.

4. Enter a value for the new Architecture Element ID.

5. Click Finish.

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 3-29

Revise a parameter value group

1. In My Teamcenter, select the parameter value group revision that you want to revise and choose
File→Revise.
The Revise dialog box appears.

2. Type a value in the Revision ID box and click Finish.

A new revision is created and all the parameter value objects associated with the old parameter group
value revision are copied to new objects. These new objects are associated to the new revision of the
parameter group value. You can now modify the parameter values.

Edit a parameter value group

1. In My Teamcenter, select the parameter value group object that you want to edit and choose
Properties from the shortcut menu.
The Properties dialog box appears.

2. Click Check-Out and Edit to edit the modifiable properties.

The CheckOut dialog box appears.

3. Click Yes to confirm.

Note:
You cannot perform a cancel checkout operation on CCDM objects, as work-in-progress
history tracking is not enabled for CCDM objects. If you try to cancel a checkout, an error
message displays and the CCDM object does not revert to its original value.
To release a checkout lock, check in the CCDM object and, if you need to change any previous
edits, check out the object, make the desired changes, and then check in the CCDM object
again.
To track work-in-progress history, lock the previous revision, create a new revision, and
modify the newly created revision.

4. Double-click the Actual Value cell to modify the parameter values you want to change.

5. Click Check-In and Save.

Delete a parameter value group

1. In My Teamcenter, select the parameter value group object that you want to delete.

2. Click Delete on the toolbar or alternatively, choose Edit→Delete.

The Delete dialog box appears.

3-30 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

3. Click Yes to confirm.

The selected parameter value group object is deleted.

Exporting and importing CCDM data

Overview of exporting and importing CCDM data

The CCDM feature provides export and import capabilities for exchanging parameter definition and
value data. The export and import operations are supported for standard file formats like Hex32, CDF,
and A2L. It supports export of parameter values and address data for generation of flash files.
Teamcenter defines extension points for generating specific flash files. You can implement extensions to
generate the standard flash files based on the data in Teamcenter. The following figure captures the
export and import process:

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 3-31

Import of data happens through standard files. The import operation supports import of memory layout
details and import of conversion rule details. Teamcenter defines extension points for parsing standard
files. You can implement extensions to parse the standard files and generate data structures. The data
from the generated data structures is updated in the Teamcenter database.

You can export and import CCDM data using the Software Parameter Manager. It allows you to choose
the required options, export parameter values from a project, and import portion of parameter
definitions in a project, dictionary, memory layout, or override container.

3-32 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

All error/warnings of the import and export operations are logged in a log file. It is generated in the
temporary location of the system example c:\temp. You can view this log file after the operation is
complete.

Export CCDM data

1. In Software Parameter Manager, select the project or product variant intent you want to export and
choose Tools→Export CCDM Data.
The Parameter Export dialog box appears.

2. Select the memory layout you want to export.

3. Select the override revision.

Note:
The Override Container is populated based on the revisions of the override item that is
associated to the selected project.

4. Select the file type.

Note:
The file type is populated based on those sub-classes of Ccd0ParmFile where the
Ccd0FileTypeExchangeSupported business object constant is set to either Both or Export.

5. Browse and select the file path where you want to save the exported file.

6. Enter a prefix for the file name.

Note:
The file name would be the prefix followed by the memory layout name and then the file
extension based on the file type you selected. If the long id preference is set, then the file
name should not be more than 128 characters. Else, only 32 characters are allowed.

7. Select the Save Dataset check box.

If you select this, the dataset corresponding to the files generated for each selected memory layout
is created and associated to the selected project using a specific relation type. One dataset will be
created for each memory layout. The dataset will be visible in Software Parameter Manager
perspective and associated with its memory layout in the tree.

8. Select the Overwrite Existing Data check box.

If you select this, the system checks whether another dataset exists with the same name. If a
dataset with the same name exists, then it overwrites the contents. If this check box is not
selected, the system will give you the option to either overwrite or rename.

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 3-33

9. Select the Show Error Log check box

If you select this, the system displays the error log after the operation.

10. Click Next if the form options for the selected file type is set to true and Next is enabled. Else, click
Finish to perform the export operation.

11. Enter the form options in the Export Options dialog and click Finish.

Note:
You see this dialog only if you had clicked Next in the previous step.

Import CCDM data

1. In Software Parameter Manager, select the project, dictionary, memory layout, or override
container you want to import data into and choose Tools→Import CCDM Data.
The Parameter Import dialog box appears.

2. Select the type of file you want to import.

The options listed are auto-populated based on those sub-classes of Ccd0ParmFile where the
Ccd0FileTypeExchangeSupported business object constant is set to either Both or Import.

3. Browse and select the data file to import.

Note:
When you click Browse, you can only select files of those extensions that correspond to the
named references of the selected file type.

4. Select the Save Dataset check box to display the text file where you can specify the dataset name.

Note:
If the Save Dataset check box is selected, the dataset corresponding to the specified file is
created and associated to the selected object with a specific relation type. If the long id
preference is set, then the file name should not be more than 128 characters. Else, only 32
characters are allowed.

5. Select the Proceed on Error check box to continue with import even if there is an error.

6. Select the Show Error Log check box to display the error log after the operation is complete.

7. Select the Overwrite Existing Data check box to override existing data.

8. Click Click here to Validate Import Data if the file type you chose did not have any associated
form. Then click Finish .

3-34 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

Else, click Next for the Import Options dialog box.

Note:
The Click here to Validate Import Data button is visible only if the file type you chose did
not have any associated form. This also displays any errors.

9. In the Import Options dialog, enter the form options.

10. Click Click here to Validate Import Data to validate the import data and click Finish to import it.

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 3-35

3-36 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

© 2020 Siemens
4. Managing the embedded software
implementation process
Overview of managing the embedded software implementation
process
Various industries are fast moving toward a component-based embedded software system development
approach. The Embedded Software Design Data Management solution bridges the current industry gaps
in the usage of the embedded software components. An embedded software component is a self-
contained entity that can be used as a building block in the design of a larger system. It can be used an
arbitrary number of times within the same system as well as in different systems.

Use the Embedded Software Design Data Management solution to:

• Manage design data (source code, models, object files, third-party libraries and specifications) of
embedded software components.

• Create, update, and delete software design data components.

• Define dependencies and associate specifications, source code, and test cases to software design data
components.

• Launch an efficient search and comparison of components based on attributes.

Using this solution, designers can define the composition framework of the embedded software
component and developers can define the build dependencies of the embedded software component.
The user can link the binary to source code and achieve the binary to source code traceability.

The following figure depicts the functions of the Embedded Software Design Component Management
solution in Teamcenter.

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 4-1

Create software design component

The design component is the building block and helps to specify the source code, object files, or
libraries, which are used to generate the software binary.

1. In My Teamcenter, choose File→New→Software Design Component.

The New Software Design Component dialog box appears.

2. Select the SoftwareDesignComp option and click Next.

3. Enter a name, description, and ID for the new software design component. The Object ID box is
populated by default.

4. Click Finish.

Associate source code to software design component

1. In My Teamcenter, select the Teamcenter SCM object and choose Edit→Copy.

2. Select the revision of the software design component object and choose Edit→Paste.
Because the default paste relation is defined, the SCM object gets associated with the
Specification relation.
Alternatively, choose Edit→Paste Special and select the Specification relationship.

Associate reference data to software design component

You can associate reference data in the form of design documents, test documents, or some other
reference data to the software design component using the References relation.

1. In My Teamcenter, select the reference object and choose Edit→Copy.

2. Select the software design component object and choose Edit→Paste.

The Paste dialog box appears.

3. Choose the References relationship from the list and click OK.

Define dependency
You can define dependencies for building a software component to generate the corresponding binary.

1. In My Teamcenter, select the required software design component object and choose Edit→Copy.

2. Select the dependent software design component object and choose Edit→Paste.
The Paste dialog box appears.

4-2 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

3. Choose the Dependent On relationship from the list and click OK.

View existing build dependencies of software design component

• In My Teamcenter, go to the software design component folder in the navigation tree and expand the
folder to see the build dependencies.

Remove build dependencies of software design component

1. In My Teamcenter, go to the software design component folder in the navigation tree and expand
the folder to see all the build dependencies.

2. Select the dependencies you want to remove.

3. Choose Edit→Cut.

Modifying software design component

You can modify the associations, source code, or the reference data by making modifications to the
relation object that links the software design component to the reference data or the source code.

Revise software design component

You can create a new revision of the software design component.

1. In My Teamcenter, select the software design component you want to revise and choose
File→Revise.
The Revise dialog box appears.

2. Make the desired modifications and click Finish to generate a new revision of the software design
component.

Deleting software design component

You can delete the software design component along with its relations, source code, and reference data.

Link software design component to binary

You can link the software design component to the corresponding software binary or binaries using the
SCM_Element_specification relationship. Linking these two objects helps to track the source code
through the software design component of the corresponding binary.

1. In My Teamcenter, select the software design component object and choose Edit→Copy.

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 4-3

2. Select the application software object and choose Edit→Paste.

The Paste dialog box appears.

3. Choose the SCM_Element_Specification relationship from the list and click OK.

Creating a repository of embedded software component

You can create a repository of software design components using the Classification Admin application
and then classify it in the Classification application. The repository helps to categorize the existing
software design components by the domain, groups, or classes of embedded software components. The
process of creating a hierarchy and classifying objects is described here.

1. Ensure that you have added the SwDesignComp and SwDesignCompRevision objects to the
ICS_classifiable_types preference, so that the objects get qualified for classification.

2. In Classification Admin, create a hierarchy by defining groups and subgroups as needed.

3. In the attributes dictionary, create a new attribute that classifies the Teamcenter object.

4. Create a class and associate the attribute to this class.

5. Select a Teamcenter object of item type and drag it to the Classification application.
If there is no corresponding ICO, the system prompts you and creates it.

4-4 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

© 2020 Siemens
5. Managing ClearCase Integration
Overview of managing ClearCase Integration
ClearCase Integration enables you to incorporate software components created under ClearCase into
complex product configurations comprising multiple mechanical, electrical, and software design
elements in Teamcenter. By integrating into a single Teamcenter-managed PLM environment, you can
configure, track, and control all hardware and software components that compose your product and
their related product/process definitions. You can manage versions of software files in ClearCase and use
Teamcenter for product modeling, workflow, and process management. Teamcenter manages the
artifacts for ClearCase objects but does not act as a parallel vaulting system for ClearCase files. All files
are in ClearCase.

Use the rich client to manage the product data of the hardware part of the product and use ClearCase to
manage the product data of the software part of the product. With ClearCase Integration, you can access
ClearCase information from Teamcenter and query the ClearCase views and versioned object bases
(VOB). ClearCase Integration allows you to check out, check in, and create a workflow process.

Understanding ClearCase Integration

Basic concepts about ClearCase Integration

The benefits of ClearCase Integration, how to manage ClearCase users, and connectivity of ClearCase
with Teamcenter are explained here.

Benefits of ClearCase Integration

• Enables you to establish a single source of product information that accounts for a product’s software
design definitions in addition to its mechanical and electrical design definitions.

• Enables cross-discipline teams to participate in an integrated design environment that accounts for
the entire product configuration as it evolves through its life cycle.

• Allows software developers to perform their software configuration management tasks in their
ClearCase environment and their integrated design tasks in an enterprise PLM environment.

• Allows software development teams to manage traceability to the source code from the software
binary part of a product. This is particularly helpful in assessing the impact of changes and identifying
which source code needs to be changed for a particular issue.

• Allows software development teams to share their most stable ClearCase data with the rest of the
stakeholders in the product life cycle.

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 5-1

• Helps to accelerate the product life cycle, improve quality, and reduce cost by allowing software
developers to understand the impact of software design as early in the product life cycle as possible.

• Enables enterprises to tie product requirements into the software design cycle, thereby allowing
software development teams to understand a product’s quality definitions and thereby, design in
quality and design out defects.

• Ensures that the latest product decisions (such as design changes and their related work impacts) are
communicated and fully understood by every stakeholder in the product life cycle.

ClearCase and users

ClearCase does not maintain a database of its users. Any user who is logged on to a ClearCase host and
can acquire a license can use the software. ClearCase relies on a server host’s operating system to
establish a user’s identity. It is important that the administrator ensures that user identities are
consistent on every ClearCase host. A user's identity is defined by the following attributes:

• User ID

• Principal group ID

• Supplementary group IDs (optional)

You can achieve this consistency by using the network-wide databases maintained by the operating
system, such as the Windows NT or Active Directory domains on Microsoft Windows.

Teamcenter and ClearCase connection

When you install ClearCase Integration, connectivity is established between Teamcenter and ClearCase.
When you create or modify Teamcenter objects that represent ClearCase data, this connectivity keeps
the two systems synchronized.

The synchronized processes run in the background without user intervention and make the following
checks:

• ClearCase server is accessible.

• ClearCase licenses are available.

What is SCMVersionObject?

SCMVersionObject is a Teamcenter object created to represent versioned objects in an SCM system. In

the case of ClearCase Integration, SCMVersionObject is used to represent single or multiple ClearCase
element versions. For example, for a file element called abc.txt in ClearCase, SCMVersionObject can be
created in Teamcenter representing a specific version of abc.txt.

5-2 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

The following table shows the GRM relationship that can exist between SCMVersionObject and a
business object. It defines the operations and relations that can or cannot exist between a business
object and SCMVersionObject. For example, you can create SCMVersionObject in a folder but not in a
dataset.

Business
object Operations Relations

Create Edit Delete Cut, copy, and Associate Dissociate

paste

Item Y Y Y Y SCM_Element Remove

_Specification relation

Item Y Y Y Y SCM_Element Remove

Revision _Specification relation

SwDesign Y Y Y Y IMAN_ Remove

Comp Specification relation
Revision

Folder Y Y Y Y Contents Remove

relation

Dataset N N N N - -

Form N N N N - -

GDE N N N N - -

Note:
Deletion of a Teamcenter object that is associated with SCMVersionObject does not delete the
SCMVersionObject. The operation deletes the primary object after removing the relation with the
version object.

Basic tasks using ClearCase Integration

To manage ClearCase Integration, you can perform a series of tasks. Typically, these are the basic tasks:

• Verify connectivity and create Teamcenter users of ClearCase data.

• Register user's default view.

• Create SCMVersionObject.

• Check out and check in SCMVersionObject.

• Create a workflow process for ClearCase data.

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 5-3

Teamcenter ClearCase Integration and Multi-Site

Teamcenter ClearCase Integration supports Multi-Site import and export. The SCMVersionObject is the
primary object, which gets exported to a remote site during a Multi-Site operation.

Before you work with Multi-Site in a ClearCase Integration environment, ensure the following:

• The value of SCMVersionObject is present in these preferences:

• TC_publishable_classes

• TC_directly_transferable_classes

• The SCM_element_specification is added to the TC_relation_export preference.

• If the ClearCase clients at remote sites are configured for different ClearCase servers, then the
SCM_ClearCase_Server preference is configured to include the remote site’s ClearCase server and
the ClearCase sites must be in sync.

All basic Teamcenter operations such as checking in and out and cancelling checkout along with
checking in and out and cancelling checkout of ClearCase elements are supported if you have done the
transfer of ownership during the export operation.

During an export, when the Item or ItemRevision to which the SCMVersionObject is associated through
SCM_Element_specification relation is exported to the remote site, the SCMVersionObject is also
exported.

After export, you are able to view the ClearCase Integration information directly on the Teamcenter
SCMVersionObject at the remote site. Along with other properties, you can view these compound
properties:

• SCM server

• SCM element path

• SCM configuration rule

• SCM server type

Note:
You cannot view the SCM configuration rule at the replica site because Browse is unavailable. To
view the SCM configuration rule, open the Properties dialog box. Scroll bars are displayed when
the SCM configuration rule text exceeds the text area space.

5-4 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

Administering ClearCase Integration

Overview of administering ClearCase Integration

As an administrator, after you install ClearCase Integration, you must check the connectivity between
ClearCase and Teamcenter, set preferences, and create users.

Verify connectivity with ClearCase

1. Open the Organization application.

2. Choose Tools→Verify ClearCase Connectivity.

If the connection is established, a success message appears. If the connection is not established,
Teamcenter displays an error message.

Note:
The error message could be due to one of the following reasons:

• You have not entered the ClearCase server host name correctly.
Ensure that the value entered for the SCM ClearCase server during installation is correct.

• The configured ClearCase server user does not match with the ClearCase server to which
Teamcenter is configured.
Ensure that the value of the SCM_ClearCase_Server preference is populated and correct.
The ClearCase server the user is configured to must match with value of the
SCM_ClearCase_Server preference.

• ClearCase environment is not set up correctly.

Ensure that the ClearCase client environment is set up correctly on the system from which
the Teamcenter rich client is run. To test, open a command window/shell and invoke
Cleartool hostinfo –l command. If errors occur, contact your system administrator.

To diagnose a connection failure or license issues, you can run ClearCase diagnostics, as
described in the ClearCase documentation.

3. If the connectivity check is successful, in My Teamcenter, choose Edit→User Settings→SCM

Workspace to verify that you have access to the necessary ClearCase views.

Setting preferences

As an administrator, you can set the following ClearCase preferences to suit the requirements at your
site:

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 5-5

• SCM_ClearCase_Server
This preference establishes and verifies the connection with the ClearCase server. You can configure
multiple ClearCase servers by adding them to this preference.

• SCM_CheckIn_Identical_Version
This preference determines whether Teamcenter runs the SCM checkin command when the checked-
out version is identical to the previous version of the element. You can set this to true or false.

• SCM_ClearCase_UNCO_Keep_Version
This preference determines whether .keep files are preserved in ClearCase when you use the
uncheckout command. You can set this to true or false.

Create Teamcenter users of ClearCase data

1. Open the Organization application.

2. Click Users.

3. Define each Teamcenter user by typing the values in each of the following boxes:

• Person Name

• User ID

• OS Name
This entry must correspond exactly to the user's operating system name in ClearCase. This allows
the user to perform ClearCase actions from Teamcenter.
Optionally, you can also define a password, a default group, and volume for the user.

4. Click Create.

Using ClearCase Integration

Overview of using ClearCase Integration

After the administrator has verified connectivity with ClearCase and set the preferences, as a
Teamcenter user, you can register your view and start working with ClearCase Integration. You can
create a SCMVersionObject and check it out and check it in. You can also undo the checkout and create
a workflow process for ClearCase data.

Register your default view

To access data stored in ClearCase versioned object bases (VOBs), you must select the appropriate
ClearCase view for yourself. This view is your default view and is used to browse the ClearCase elements.

5-6 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

1. Open My Teamcenter.

2. Choose Edit→User Setting.

The User Settings dialog box appears.

3. Click the SCM Workspace tab.

The Select Default View pane appears.
You can choose to see only your views, by selecting the Show my views only check box.

4. Choose the view you want to designate as the default view for yourself.

5. Click OK.
Teamcenter checks for the following:

• The view exists.

• The view is accessible from your workstation.

• The view is started on your workstation. If not, it starts the view on your workstation.

The ClearCase view tag is stored as a user preference in Teamcenter to allow quick access to the view
information in subsequent sessions.

Create SCMVersionObject

To create SCMVersionObject, you must associate the Teamcenter object with either a single ClearCase
element or multiple ClearCase elements.

1. Open My Teamcenter.

2. Choose File→New→SCMVersionObject.
The New SCMObject wizard appears.

3. In the Name box, type the name of the ClearCase element you want to associate with the
Teamcenter object.

4. Choose the Navigate the VOBS or Use Existing Element Object option.

• Choose Navigate the VOBS to browse and select all the elements you want to associate with the
Teamcenter object. You can select multiple SCM elements at one time to add. All selected
elements appear in the Elements list.

• Choose Use Existing Element Object to select the existing element that you want to associate
with the Teamcenter object. In the Name box, type the name of the existing element. For a
wildcard search, type *. A list of all existing elements displays for you to choose from.

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 5-7

5. Select Use Selected View to choose an element from the current view.
To select an element from another view, choose the Use Different View option and select a view
from the list of views displayed.

6. Click Next.
The Select Configuration pane appears.

7. Select the configuration by choosing one of the following:

• The current version of the ClearCase element by clicking Select Current View Configuration.

• The label by clicking Select Label and selecting the required label.

• The branch, for example, LATEST, by clicking Select Branch and selecting the required branch.

• The precise version by clicking Select Version and selecting the required version.

Note:
The Select Version option does not appear if you have associated the Teamcenter object
with multiple ClearCase elements.

8. Click Finish.

Teamcenter creates SCMVersionObject by associating the Teamcenter object with the selected
ClearCase elements. SCMVersionObject holds the ClearCase element name, kind, and configuration
context.

Check out SCMVersionObject

You can check out and place a lock only on a view-based SCMVersionObject. This gives you exclusive
rights to modify the associated data.

1. Open My Teamcenter.

2. Select the SCMVersionObject and choose Tools→Checkin/Checkout→Checkout.

The CheckOut dialog box appears.

3. In the Change ID box, type a value and (optionally) any comments.

Note:
You can also select the Check out ClearCase Element as well check box. If you select this
box, you check out both the Teamcenter object and the associated ClearCase element. If you
do not select this box, you check out only the Teamcenter object. If you check out the

5-8 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

associated ClearCase element, the Teamcenter object uses the current view and its
information to access ClearCase and check out the ClearCase element.

4. Click Yes.

Note:
You can verify the checkout by using one of the following ways:

• Run the ClearCase explorer for the view on which you are performing ClearCase operations
and note the checkout symbol next to the file you checked out.

• Open ClearCase command prompt and set the view on which you are working. Run the
lsco operation on the file you checked out.

Check in SCMVersionObject

After you have finished modifying the SCMVersionObject, you can check it back in to ClearCase.

1. Open My Teamcenter.

2. Select the SCMVersionObject and choose Tools→Checkin/Checkout→Checkin.

The CheckIn dialog box appears.

3. Click Yes.
Teamcenter checks in the Teamcenter object associated with the ClearCase element.
If the object you are trying to check is identical to the previous version of the object on the server,
then the checkin fails and an error appears. In such a case, you should cancel the checkout.
See the SCM_CheckIn_Identical_Version preference that determines identical checkin behavior.

Note:
Teamcenter uses the ClearCase view (workspace) to access the checked-out ClearCase element
and then to check it in to ClearCase. This places the information from the view storage area into
the VOB storage area; that is, from a temporary storage into the permanent VOB storage. You can
delete the workspace (view) if there are no more ClearCase objects remaining to work on. Thus,
the information carried by the Teamcenter object reflects the new location of the ClearCase
object.

Note:
If you have checked out the SCMVersionObject from Teamcenter and checked in Clearcase
Element from the ClearCase explorer, ensure that you check in from Teamcenter, else the
SCMVersionObject will be shown as checked out in Teamcenter.

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 5-9

Undo the checkout of SCMVersionObject

You can undo a checkout operation if you want the data to return to its previous state. This cancels any
changes that you made to the data.

Caution:
If you cancel a checkout operation, any changes you made to the associated data are lost.

1. Open My Teamcenter.

2. Select the SCMVersionObject.

3. Choose Tools→Checkin/Checkout→Cancel CheckOut.

The Cancel CheckOut dialog box appears.

4. Click Yes.

Teamcenter cancels the checkout and data reverts to its previous state. It also restores the original
information about the Teamcenter object associated with the ClearCase object.

Create a workflow process for ClearCase data

You can create a workflow to apply a label to the ClearCase elements associated with
SCMVersionObject. You can use the SCMApplyLabel Task template to create a process for any
SCMVersionObject whose new configuration on completion of a task is a label.

Note:
Steps 1–10 are administrative tasks, and you must be an administrator user to perform them. The
steps after that are regular user actions and any user having ClearCase access can perform them.

Log on as an administrator and complete the following steps:

1. Open the Workflow Designer application.

2. Choose File→New Root Template.

The New Root Template dialog box appears.

3. In the New Root Template Name box, type SCMProcess.

4. Choose Process as the template type.

5. Click OK.
In the Workflow Designer pane, the Process Template list displays the template name.

5-10 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

6. Choose Edit→Template→SCMApplyLabel Task.

The SCMApplyLabel Task template appears in Workflow Designer.

7. Link Start and SCMApplyLabel Task by clicking the Start task and dragging it to SCMApplyLabel
Task.

8. Link SCMApplyLabel Task and Finish by clicking SCMApplyLabel Task and dragging it to the
Finish task.

9. Select the Set to Available Stage Template option.

A confirmation window appears.

10. Click Yes.

Log on as a Teamcenter user and complete the following steps:

1. Open My Teamcenter.

2. Select the SCMVersionObject.

3. Choose File→New→Process.
The New Process dialog box appears.

4. In the Process Name box, type a value.

5. From the Process Template list, choose SCMProcess.

6. Click OK.

7. Go to your inbox and expand the Tasks to Perform folder.

8. Select the SCMVersionObject.

9. Choose Actions→Perform.
The Perform SCMApplyLabel Task dialog box appears.

10. Select Task Instruction and click Done.

11. Click OK to perform the task and apply the label.

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 5-11

5-12 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

© 2020 Siemens
6. Using binary management
Binary management
You can manage binary with the Software Binary Management Solution by creating the software
revision and uploading it to Teamcenter and making it available for flashing. Once in Teamcenter, the
binaries may be placed under change control and their history tracked. They can be reused and
associated to products, where they can be configured for specific feature combinations.

Create binary software revisions

1. Choose File→New→Item and select the appropriate type of software:

• AppSoftware
Creates an application software item. This type represents the software that implements the
actual functionality.

• Calibration
Creates a calibration software item. This type represents the software that calibrates the
application software.

• Config File
Creates a configuration file software item. This type represents the configuration information on
which the application software depends.

• PriBootLoader
Creates a primary bootstrap loader software item. This type represents the bootloader software
of the control unit.

• SecBootLoader
Creates a secondary bootstrap loader software item. This type represents the software that
makes the control unit flashable.

2. Click Next. The New Item dialog box for the selected software type appears.

3. Enter the identifier and description of the new software item and click OK or Apply. Teamcenter
creates a new software item of the selected type.
Optionally, you can click Next again, rather than OK or Apply to define the master form attributes
and assign the software item to a project.

Mapping released binary to a specification and design components

A design engineer uses the data in Teamcenter to generate a software specification that is sent to an
internal development group or external supplier to create the necessary binary. The general work
process is as follows:

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 6-1

• A design engineer creates a software specification for the software to be flashed to the control unit.

• The design engineer sends the specification to an internal development group or external supplier.

• The development group or supplier develops the software in compliance with established standards.

• The development group or supplier validates the release binary by executing a preconfigured file
format checker. Optionally, the binary may be converted to other formats. This step must succeed
before the binary is released.

• The development group or supplier creates a release binary and associates it with the software design
component in Teamcenter as a named reference. The source code is managed in the source control
management (SCM) system and may also be associated with the same software design component.

To allow file format checkers to verify software binaries, you create a dataset and attach the software
files to it. As a prerequisite for importing the dataset, you must configure validation of the extension
rule for the software binary dataset type; likewise you must configure the conversion extension rule on
the post action.

Upload binary data into Teamcenter

1. Ensure that the administrator has configured Teamcenter by creating a dataset type that can be
used for managing binary data.

2. Select the software item type revision for which data needs to be managed.

3. Choose File→New→Dataset.
The New Dataset dialog box appears.

4. Fill in the required information and select the file corresponding to the selected software item
revision you want to upload into Teamcenter.

5. Click Finish.
A new dataset of the selected type is created and the file chosen is uploaded into Teamcenter. The
dataset gets associated to the software item revision.

Making software available for flashing

The released binary is downloaded by the flashing application so that the flashing tool can store the
binary on the control unit. Sometimes the control unit may be preconfigured and preflashed with the
release binary, in which case this step is not necessary. Production personnel or a service technician
enters the software part number and revision into the flashing application. This process downloads the
binary file for flashing onto the control unit.

6-2 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

Note:
The user interface for capturing technician inputs is written in the flashing application or any
application that is used by the technician. This application has an Application Interface (AI) service
client, which interacts with Teamcenter and downloads the binary corresponding to the
information passed in the user interface.
For more information about the AI Service, see the Services Reference in the Teamcenter HTML
Help.
To access the Services Reference, install the Teamcenter developer references when you install
Teamcenter online help, or go to https://support.sw.siemens.com.

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 6-3

6-4 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

© 2020 Siemens
7. Managing control units
Overview of managing control units
After you have created your control units, you search for the hardware and software for the control unit
and associate them. You can also generate reports on the compatibility of the hardware and software
and finally associate the control unit to the product configuration.

Create a control unit

1. Choose File→New→Item.
The New Item dialog box appears.

2. Select Part as the item type or select an item type that represents a part at your site.

Identify and associate hardware and software to control units

1. Search for the hardware and software relevant to the control unit you created.

2. Select the hardware and software and copy them to the control unit.

Querying hardware software compatibility

Overview of querying hardware software compatibility

During the life of a product, service engineers may need to change the hardware or the software of the
product. If such a change is made, it is necessary to determine that the replacement item is compatible
with the existing parts. If the software is changed, the existing hardware must be compatible with the
new version of the software. Similarly, if a hardware is changed, the new hardware should be
compatible with the existing software, else a new software must be flashed.

To check such things, in Teamcenter you can generate compatibility reports and use them to:

• Identify the compatible software.

• Identify the compatible hardware.

Embedded Software Solutions allow you to generate compatibility reports in HTML format. Default
stylesheets are supplied with Teamcenter. You can overwrite the default stylesheets with your own
custom stylesheet templates.

To create an HTML report, select the hw_sw_html_report_template.xsl template file.

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 7-1

You can extend the content of the report to include more details by configuring the transfer modes used
for the generation of reports. If a transfer mode is used to display more information in the report, you
should also update the stylesheet to translate the additional information correctly.

The following preferences must be updated when changing the transfer mode and the stylesheet:

• ESM_HW_Compatibility_Report_TransferMode

• ESM_SW_Compatibility_Report_TransferMode

• ESM_HW_Compatibility_Report_HTML_StyleSheet_Dataset

• ESM_SW_Compatibility_Report_HTML_StyleSheet_Dataset

Create a report of compatible software

For a defined hardware identifier (for example, a control unit hardware part number), you can search for
all the compatible software parts and assemblies.

1. In My Teamcenter, choose Tools→Embedded Software Manager→Compatibility

Report→Hardware-Software.
The Software Compatibility Report dialog box appears.

2. Enter the item identifier and revision of the hardware item and click Next.

3. Select the HTML report format and click Finish.

Teamcenter generates the requested report.

4. Select the table and use the shortcut menu to export this report to Excel. Alternatively, you can
copy and paste the table into Excel.

Associating control units to product configuration

After the designer defines the software part in Teamcenter, the engineer can register it for a given
product configuration with the Add Part to Product wizard in Platform Designer. You can configure a
given control unit to a particular variant and add the control unit variant as a part to the product.
Alternatively, you can add individual components such as hardware or software to the product.

7-2 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

© 2020 Siemens
8. Customizing solutions and exchanging
software data
Overview of customizing solutions and exchanging software data
Embedded software item types are transferred when you export or import structure data in PLM XML
format. Using ITK functions, you can customize Embedded Software Solutions.

Exchanging embedded software information

When you export or import structure data in PLM XML format, the following Teamcenter Mechatronics
Process Management and embedded software object types are also transferred:

• Connection (revisable)
• GDELink (nonrevisable connection)
• Signal
• Message
• Connection_Terminal (GDE)
• Network_Port (GDE)
• ProcessVariable (GDE)
• Processor (item)
• Software
• SwDesignComp
• SwDesignCompRevision
• Parameter Definition and subclasses.
• Parameter Definition Group
• Parameter Value Group

When you import or export structure data with Data Exchange, CCDM parameter definitions, parameter
definition groups, and parameter value groups are transferred.

For exporting product variant and product variant intent objects, use the MRMAssemblyExport transfer
mode. Add the following property set to the MRMAssemblyExport transfer mode:

CLASS ProductVariant PROPERTY productCtxt DO

Adding this property set ensures that the productCtxt attribute is exported out as user data.

Table cells along with cells and definition information are exported as user data elements when property
set is added for them.

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 8-1

Customizing Embedded Software Manager

The embedded software manager module provides the following ITK functions that allow you to
customize Embedded Software Manager.

• ESM_is_processor
For a BOM line tag, this function checks whether it is a processor BOM line.

• ESM_is_gateway
For a processor BOM line tag, this function checks whether it is a gateway processor BOM line.

• ESM_is_software
For a BOM line tag, this function checks whether it is a software BOM line.

• ESM_associate_processor_to_software
For a processor BOM line and an array of software BOM lines, this method associates a processor and
a software with the Embeds relation. To save the associations, the BOM window must be saved.

• ESM_associate_processor_to_processor
For a gateway processor BOM line, and an array of processor BOM lines, this method associates one
processor to another with the GatewayOf relation.

• ESM_associate_software_to_software
For a software BOM line and an array of software BOM lines, this method associates software with the
Dependent On relation. To save the associations, the BOM window must be saved.

• ESM_remove_processor_to_software_association
For a processor BOM line and an array of software BOM lines, this method removes the Embeds
relation association between processor and software lines.

• ESM_remove_processor_to_processor_association
For a gateway processor BOM line and an array of associated processor BOM lines, this method
removes the GatewayOf relation association between the processor lines.

• ESM_remove_software_to_software_association
For a software BOM line and an array of software BOM lines, this method removes the Dependent On
relation association with the software lines.

• ESM_ask_embedded_software_of_processor
For a processor BOM line, this function gets an array of software BOM lines that are associated to the
processor with an Embeds relation.

• ESM_ask_gateway_of_processor
For a processor BOM line, this function gets an array of gateway processor BOM lines that are
associated as the gateway with the input processor line.

• ESM_ask_processors_accessedby_processor

8-2 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

For a gateway processor BOM line, this function gets an array of processor BOM lines that are
accessed through the input gateway.

• ESM_ask_dependent_software_of_software
For a primary software BOM line, this function gets an array of (secondary) software BOM lines that
are dependent on the primary software.

• ESM_ask_software_used_by_software
For a (secondary) software BOM line, this function gets an array of (primary) software BOM lines that
are used by the secondary software.

In addition, the SIG module provides the following ITK functions that allow you to customize the
operations that can be performed on frames, signals, and relations:

• SIG_ask_signal_source
Finds all the sources of a signal or message line tag using the associated_system relation.

• SIG_ask_signal_target
Finds all the targets of a signal or message line tag using the associated_system relation.

• SIG_ask_signal_transmitters
Finds all the transmitters of a signal or message line tag using the associated_system relation.

• SIG_ask_device_sources
Finds all the source devices that transmit messages or signals to the input target device. This function
uses the underlying associated_system relation between the source and the message or signal.

• SIG_ask_device_targets
Finds all the target devices to which the device transmits messages or signals. This function uses the
underlying associated_system relation between the target and the message or signal.

• SIG_ask_device_ transmitted_signals
Finds all the frames or signals that are transmitted by a source device. This function uses the
underlying associated_system relation between the source and the message or signal.

• SIG_ask_device_ received_signals
Finds all the messages or signals that are received by a target device. This function uses the
underlying associated_system relation between the target and the message or signal.

Using a custom constructor for parameter value group creation

You can use the custom command constructor to instantiate and create a new parameter value group
object wizard.

When you create the parameter value group, you determine the associated parameter group definition
revision for which the group value object has to be created, by following steps 6 through 11 in Create a

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 8-3

parameter value group. But, if you already have the parameter group definition revision object
reference, you can use the custom constructor for creating a parameter group value object.

In the custom code, from where you invoke the group value object creation wizard, use the following
command class constructor instead of the default constructor.

• Constructor Name
NewParamValGrpCommand

• Parameters
Frame– reference to the parent frame.
AbstractAIFApplication– reference to the AIF application.
TCComponentArchitectureRevision– reference to the parameter group definition revision object.

Customizing for CCDM export and import

Overview of customizing for CCDM export and import

The dataset Ccd0ParmFile provides only the out of the box functionality to process the CCDM data and
provide data for export. Likewise, it only provides out of the box functionality to import the data given in
the specified data structure.

For export, the custom dataset has to override the required method ccd0generateFile on Ccd0ParmFile
dataset object to have its own implementation for generating the required file format. The data for
export is provided in ParmFlashGenerationExpData data structure. Please refer to the Teamcenter root
folder includes\Ccd0ExpImp.h.

For import, the custom dataset has to override the required method ccd0Parse to parse the input file
and populate the data in the data structure and the out of the box functionality imports the data. The
data for import is in DictionaryParseOutput data structure. Please refer to the Teamcenter root folder
includes\Ccd0ExpImp.h.

Customize CCDM export and import

1. In Business Modeler IDE, create a custom dataset of type Ccd0ParmFile.

2. Provide the FileTypeExchange supported in the Ccd0FileTypeExchangeSupported Business

Modeler IDE constant. Choose fromExport, Import, Both, or None.

3. Provide the required information about the optional form to be used for export in Business Modeler
IDE constant Ccd0ExportOptions.

4. Provide the required information about the optional form to be used for import in Business Modeler
IDE constant Ccd0ExportOptions.

8-4 PLM00045 13.0 Embedded Software Solutions, Teamcenter 13.0

5. Override the required operations for the custom dataset based on the FileTypeExchange
supported.

6. Deploy the changes to the database.

7. Provide the custom implementation for the overridden methods.

8. Build the custom dll.

Embedded Software Solutions, Teamcenter 13.0 PLM00045 13.0 8-5

© 2020 Siemens
Siemens Digital Industries Software
Headquarters Europe
Granite Park One Stephenson House
5800 Granite Parkway Sir William Siemens Square
Suite 600 Frimley, Camberley
Plano, TX 75024 Surrey, GU16 8QD
USA +44 (0) 1276 413200
+1 972 987 3000

Asia-Pacific
Americas Suites 4301-4302, 43/F
Granite Park One AIA Kowloon Tower, Landmark East
5800 Granite Parkway 100 How Ming Street
Suite 600 Kwun Tong, Kowloon
Plano, TX 75024 Hong Kong
USA +852 2230 3308
+1 314 264 8499

About Siemens Digital Industries Software

Siemens Digital Industries Software is a leading global provider of product life cycle management
(PLM) software and services with 7 million licensed seats and 71,000 customers worldwide.
Headquartered in Plano, Texas, Siemens Digital Industries Software works collaboratively with
companies to deliver open solutions that help them turn more ideas into successful products. For
more information on Siemens Digital Industries Software products and services, visit
www.siemens.com/plm.
This software and related documentation are proprietary and confidential to Siemens.
© 2020 Siemens. A list of relevant Siemens trademarks is available. Other trademarks belong to
their respective owners.

Dataprocessing Ss3 Mock 2nd Term
100% (1)
Dataprocessing Ss3 Mock 2nd Term
10 pages
Schneider Unity Pro. Program Languages and Structure - Reference Manual
100% (1)
Schneider Unity Pro. Program Languages and Structure - Reference Manual
726 pages
Manual Unity Pro PDF
0% (2)
Manual Unity Pro PDF
612 pages
C79000-G8976-1477 ROX-II v2.14 RX1500 ConfigurationManual CLI
No ratings yet
C79000-G8976-1477 ROX-II v2.14 RX1500 ConfigurationManual CLI
1,014 pages
embedded_software_solutions
No ratings yet
embedded_software_solutions
108 pages
Edk CTT
No ratings yet
Edk CTT
104 pages
Utilities Reference
No ratings yet
Utilities Reference
1,000 pages
Teamcenter 10 Utilities Reference
No ratings yet
Teamcenter 10 Utilities Reference
970 pages
EDK Concepts, Tools, and Techniques: A Hands-On Guide To Effective Embedded System Design
No ratings yet
EDK Concepts, Tools, and Techniques: A Hands-On Guide To Effective Embedded System Design
80 pages
Simulation Process MGMT Install Config
100% (1)
Simulation Process MGMT Install Config
256 pages
Xilinx Design Tools: Installation and Licensing Guide
No ratings yet
Xilinx Design Tools: Installation and Licensing Guide
45 pages
Embedded System Manual Xilinx 14.4
No ratings yet
Embedded System Manual Xilinx 14.4
282 pages
04. server_customization
No ratings yet
04. server_customization
366 pages
Eio0000002168 04
No ratings yet
Eio0000002168 04
418 pages
Download complete Embedded Linux Hardware Software and Interfacing R Hardware Software and Interfacing Hollabaugh ebook PDF file all chapters
100% (2)
Download complete Embedded Linux Hardware Software and Interfacing R Hardware Software and Interfacing Hollabaugh ebook PDF file all chapters
82 pages
EcoStruxure™ Process Expert
No ratings yet
EcoStruxure™ Process Expert
1,078 pages
Ecoder Ug
No ratings yet
Ecoder Ug
155 pages
Real-Time Workshop: For Use With Simulink
No ratings yet
Real-Time Workshop: For Use With Simulink
130 pages
Ug1209 Embedded Design Tutorial
No ratings yet
Ug1209 Embedded Design Tutorial
165 pages
EcoStruxure Hybrid DCS Process Supervision Services User Guide - Eng - EIO0000000989.15
No ratings yet
EcoStruxure Hybrid DCS Process Supervision Services User Guide - Eng - EIO0000000989.15
434 pages
Developing Embedded Software Using Davinci and Omap Technology
No ratings yet
Developing Embedded Software Using Davinci and Omap Technology
159 pages
Basic Embedded System Design Tutorial PDF
100% (1)
Basic Embedded System Design Tutorial PDF
204 pages
Embedded Linux Hardware Software and Interfacing R Hardware Software and Interfacing Hollabaugh - The ebook in PDF and DOCX formats is ready for download now
100% (1)
Embedded Linux Hardware Software and Interfacing R Hardware Software and Interfacing Hollabaugh - The ebook in PDF and DOCX formats is ready for download now
50 pages
MT45115 S 141 BasicRobotics
No ratings yet
MT45115 S 141 BasicRobotics
672 pages
Modelsim Ref
No ratings yet
Modelsim Ref
542 pages
Ug1137 Zynq Ultrascale Mpsoc Swdev en Us 2024.1
No ratings yet
Ug1137 Zynq Ultrascale Mpsoc Swdev en Us 2024.1
268 pages
Ug1287 Zcu111 Rfsoc Eval Tool
No ratings yet
Ug1287 Zcu111 Rfsoc Eval Tool
71 pages
SUG918-1.9E - Gowin Software Quick Start Guide
No ratings yet
SUG918-1.9E - Gowin Software Quick Start Guide
43 pages
Microblaze Triple Modular Redundancy (TMR) Subsystem V1.0: Product Guide
No ratings yet
Microblaze Triple Modular Redundancy (TMR) Subsystem V1.0: Product Guide
97 pages
Ecoder Det
100% (1)
Ecoder Det
255 pages
Etas Rta-Rte User Guide v6.3.0
No ratings yet
Etas Rta-Rte User Guide v6.3.0
282 pages
Instant ebooks textbook Embedded Linux Hardware Software and Interfacing R Hardware Software and Interfacing Hollabaugh download all chapters
100% (6)
Instant ebooks textbook Embedded Linux Hardware Software and Interfacing R Hardware Software and Interfacing Hollabaugh download all chapters
81 pages
Ug1228 Ultrafast Embedded Design Methodology Guide
No ratings yet
Ug1228 Ultrafast Embedded Design Methodology Guide
217 pages
SUG918-1.3E_Gowin Software Quick Start Guide
No ratings yet
SUG918-1.3E_Gowin Software Quick Start Guide
48 pages
Ug1043 Embedded System Tools PDF
No ratings yet
Ug1043 Embedded System Tools PDF
92 pages
Getting Started Asic
No ratings yet
Getting Started Asic
17 pages
Questa Sim User PDF
No ratings yet
Questa Sim User PDF
1,978 pages
Vivado Design Suite User Guide: Release Notes, Installation, and Licensing
No ratings yet
Vivado Design Suite User Guide: Release Notes, Installation, and Licensing
81 pages
HyperLynx Signal Integrity Analysis Student Workbook (PDFDrive)
No ratings yet
HyperLynx Signal Integrity Analysis Student Workbook (PDFDrive)
10 pages
PLC ST
No ratings yet
PLC ST
246 pages
XPC Target Gs
No ratings yet
XPC Target Gs
178 pages
Pci Bus End Point Block
0% (1)
Pci Bus End Point Block
178 pages
ISE Design Suite 13: Installation and Licensing ISE Design Suite 13: Installation and Licensing Guide
No ratings yet
ISE Design Suite 13: Installation and Licensing ISE Design Suite 13: Installation and Licensing Guide
36 pages
GX Works3 BeginnerManual 338895 A
No ratings yet
GX Works3 BeginnerManual 338895 A
116 pages
Mbse and Sysml
No ratings yet
Mbse and Sysml
458 pages
Embedded Linux Hardware Software and Interfacing R Hardware Software and Interfacing Hollabaugh - The ebook in PDF format with all chapters is ready for download
100% (1)
Embedded Linux Hardware Software and Interfacing R Hardware Software and Interfacing Hollabaugh - The ebook in PDF format with all chapters is ready for download
56 pages
Ug1165 Zynq Embedded Design Tutorial 1
No ratings yet
Ug1165 Zynq Embedded Design Tutorial 1
136 pages
Ra Um003 - en P PDF
No ratings yet
Ra Um003 - en P PDF
209 pages
XPC Target Ug
No ratings yet
XPC Target Ug
182 pages
Embdedded software
No ratings yet
Embdedded software
7 pages
MATLAB-Manual RTW Gs
100% (1)
MATLAB-Manual RTW Gs
136 pages
Iil
No ratings yet
Iil
38 pages
Embedded
No ratings yet
Embedded
53 pages
Capital Design Tools - Common Functions User Guide
No ratings yet
Capital Design Tools - Common Functions User Guide
1,056 pages
Teamcenter Installation: Siemens Siemens Siemens
No ratings yet
Teamcenter Installation: Siemens Siemens Siemens
528 pages
Autodesk Fusion 360 PCB Black Book (V 2.0.18719)
From Everand
Autodesk Fusion 360 PCB Black Book (V 2.0.18719)
Gaurav Verma
No ratings yet
Autodesk Fusion PCB Black Book (V 2.0.21528)
From Everand
Autodesk Fusion PCB Black Book (V 2.0.21528)
Gaurav Verma
No ratings yet
Creo Manufacturing 9.0 Black Book
From Everand
Creo Manufacturing 9.0 Black Book
Gaurav Verma
No ratings yet
Creo Manufacturing 11.0 Black Book
From Everand
Creo Manufacturing 11.0 Black Book
Gaurav Verma
No ratings yet
ISA-95/IEC 62264 Enterprise-Control System Integration (E-CS) Study Notes: 500 Study Notes for Accelerated Certification Success
From Everand
ISA-95/IEC 62264 Enterprise-Control System Integration (E-CS) Study Notes: 500 Study Notes for Accelerated Certification Success
Steve Brown
No ratings yet
Open Source Customer Relationship Management Solutions: Potential for an Impact of Open Source CRM Solutions on Small- and Medium Sized Enterprises
From Everand
Open Source Customer Relationship Management Solutions: Potential for an Impact of Open Source CRM Solutions on Small- and Medium Sized Enterprises
Henrik Vogt
No ratings yet
Solid Edge 2024 Black Book
From Everand
Solid Edge 2024 Black Book
Gaurav Verma
No ratings yet
01. gs_product_visualization
No ratings yet
01. gs_product_visualization
288 pages
04. service_execution
No ratings yet
04. service_execution
148 pages
05. clearance_db_admin
No ratings yet
05. clearance_db_admin
260 pages
03. ecad_viewer
No ratings yet
03. ecad_viewer
126 pages
program_planning
No ratings yet
program_planning
160 pages
01. as_built_manager
No ratings yet
01. as_built_manager
168 pages
02. service_planner
No ratings yet
02. service_planner
192 pages
05. service_manager
No ratings yet
05. service_manager
256 pages
01. gs_customization
No ratings yet
01. gs_customization
12 pages
Dpv Tutorial
No ratings yet
Dpv Tutorial
36 pages
dispatcher_install_and_configure
No ratings yet
dispatcher_install_and_configure
106 pages
Deploying Document Management
No ratings yet
Deploying Document Management
112 pages
designcontext
No ratings yet
designcontext
52 pages
content_mgmt
No ratings yet
content_mgmt
286 pages
JT2Go Desktop Frequently Asked Questions
No ratings yet
JT2Go Desktop Frequently Asked Questions
6 pages
data_share_manager
No ratings yet
data_share_manager
36 pages
clearancedb_admin_guide
No ratings yet
clearancedb_admin_guide
220 pages
Client for Ms Office
No ratings yet
Client for Ms Office
136 pages
cacheless_search_deployment
No ratings yet
cacheless_search_deployment
52 pages
ebook-cloud-landscape-and-smart-platform-decisions
No ratings yet
ebook-cloud-landscape-and-smart-platform-decisions
16 pages
Manufacturing Based on Feature Recognition Using N
No ratings yet
Manufacturing Based on Feature Recognition Using N
6 pages
Mechrevo NTSN1531 NTSN1533 V3 32vram 20151207 171
No ratings yet
Mechrevo NTSN1531 NTSN1533 V3 32vram 20151207 171
5 pages
Answer: A: Exam Name: Exam Type: Exam Code: Total Questions
No ratings yet
Answer: A: Exam Name: Exam Type: Exam Code: Total Questions
27 pages
IPTV Mediaroom
No ratings yet
IPTV Mediaroom
6 pages
GST Mna2c
No ratings yet
GST Mna2c
2 pages
How To Put A Powerpoint Presentation in A Pendrive - Google Search
No ratings yet
How To Put A Powerpoint Presentation in A Pendrive - Google Search
1 page
Dataman Communications and Programming Guide: 2020 October 05 Revision: 6.2.1.1
No ratings yet
Dataman Communications and Programming Guide: 2020 October 05 Revision: 6.2.1.1
76 pages
Steps To Configure VoIP On Parket Tracer
No ratings yet
Steps To Configure VoIP On Parket Tracer
3 pages
High Available Data Center On The Laptop/Desktop With Xen: Martin Bracher Cyrill Müller Linuxworld 2006
No ratings yet
High Available Data Center On The Laptop/Desktop With Xen: Martin Bracher Cyrill Müller Linuxworld 2006
38 pages
Lab_guide_cacheserve7.6-rev_D
No ratings yet
Lab_guide_cacheserve7.6-rev_D
127 pages
Vsphere Replication 85 Admin
No ratings yet
Vsphere Replication 85 Admin
159 pages
System Surveillance Using Keylogger
No ratings yet
System Surveillance Using Keylogger
22 pages
Mini-Project Report Final
No ratings yet
Mini-Project Report Final
36 pages
Windows 95, 98 and Me:: Change The Registered Owner and Organization
No ratings yet
Windows 95, 98 and Me:: Change The Registered Owner and Organization
11 pages
8.51 MailAdmin
No ratings yet
8.51 MailAdmin
75 pages
Jual ACER Aspire All-In-1 Multi Media PC AZ5710 - BeraniMurah
No ratings yet
Jual ACER Aspire All-In-1 Multi Media PC AZ5710 - BeraniMurah
4 pages
Datafill - RFPar - AREA1 (Sumatera)
No ratings yet
Datafill - RFPar - AREA1 (Sumatera)
1,598 pages
000-Chapter1 CPU
100% (1)
000-Chapter1 CPU
92 pages
ExaLINK User Guide
No ratings yet
ExaLINK User Guide
44 pages
SHARE 120 - VSAM Boot Camp - An Introduction To VSAM
No ratings yet
SHARE 120 - VSAM Boot Camp - An Introduction To VSAM
50 pages
OS9 Complete Manual
No ratings yet
OS9 Complete Manual
110 pages
Coa Bcs352 Lab-10
No ratings yet
Coa Bcs352 Lab-10
3 pages
IBM USB Keyboard With UltraNav
No ratings yet
IBM USB Keyboard With UltraNav
3 pages
5a-Esp8266 SDK SSL User Manual en v1.4
No ratings yet
5a-Esp8266 SDK SSL User Manual en v1.4
19 pages
Linux Profiling at Netflix
No ratings yet
Linux Profiling at Netflix
84 pages
Operations_Guide_for_Cisco_Virtualized_Voice_Browser_11.5
No ratings yet
Operations_Guide_for_Cisco_Virtualized_Voice_Browser_11.5
56 pages
Class A Subnetting Chart
No ratings yet
Class A Subnetting Chart
1 page
Installer Info
No ratings yet
Installer Info
26 pages
3 Coc Sample Exam
No ratings yet
3 Coc Sample Exam
18 pages