13-1

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen

Differential Analysis:
The Key to Decision Making
Chapter 14

© 2015 McGraw-Hill Education

Learning Objective 1

Identify relevant and

irrelevant costs and
benefits in a decision.

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 2

2
 13-2

chi phí liên quan

Cost Concepts for Decision Making

A relevant cost is a cost that differs

between alternatives.

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 3

Identifying Relevant Costs

An avoidable cost is a cost that can be eliminated,

in whole or in part, by choosing one alternative
over another. Avoidable costs are relevant costs.
Unavoidable costs are irrelevant costs.

Two broad categories of costs are never relevant

in any decision. They include:
 Sunk costs.
 Future costs that do not differ between the
alternatives.

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 4

Relevant Cost Analysis: A Two-Step Process

Step 1 Eliminate costs and benefits that do not differ

between alternatives.
Step 2 Use the remaining costs and benefits that
differ between alternatives in making the
decision. The costs that remain are the
differential, or avoidable, costs.

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 5

5
 13-3

Different Costs for Different Purposes

Costs that are
relevant in one
decision situation
may not be relevant
in another context.
Thus, in each
decision situation,
the manager must
examine the data at
hand and isolate the
relevant costs.
© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 6

Identifying Relevant Costs

Cynthia, a Malaysian student studying in Penang, is considering visiting
her friend in Kuala Lumpur. She can drive or take the budget airline. By
car, it is 230 miles to her friend’s apartment. She is trying to decide
which alternative is less expensive and has gathered the following
information:
Automobile Costs (based on 10,000 miles driven per year)
Annual Cost Cost per
of Fixed Items Mile
1 Annual straight-line depreciation on car $ 2,800 $ 0.280
2 Cost of gasoline 0.100
3 Annual cost of auto insurance and license 1,380 0.138
4 Maintenance and repairs 0.065
5 Parking fees at school 360 0.036
6 Total average cost $ 0.619

$45 per month × 8 months $2.70 per gallon ÷ 27 MPG

$24,000 cost – $10,000 salvage value ÷ 5 years

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 7

Relevant Costs:
1.Cost of Gasoline ($0.100 per mile) – This is a variable
Identifying Relevant Costs
cost based on how much the car is driven.
Automobile Costs (based on 10,000 miles driven per year)
Annual Cost Cost per 2. Maintenance and repair
of Fixed Items Mile
1 Annual straight-line depreciation on car $ 2,800 $ 0.280
2 Cost of gasoline 0.100
3
4
Annual cost of auto insurance and license
Maintenance and repairs
1,380 0.138
0.065
3.Reduction in Resale Value of Car per Mile of Wear
5 Parking fees at school 360 0.036
6 Total average cost $ 0.619 ($0.026 per mile) – This cost increases as the car is
Some Additional Information
used.
7
8
Reduction in resale value of car per mile of wear
Round-tip airfare
$ 0.026
$ 104
4.Round-trip Airfare ($104) – This is relevant if the
9
10
Benefits of relaxing on plane trip
Cost of putting dog in kennel while gone $
????
40
alternative is flying instead of driving.
11
12
Benefit of having car in Kuala Lumpur
Hassle of parking car in Kuala Lumpur
????
????
5.Cost of Putting Dog in Kennel While Gone ($40) –
rắc rối khi đỗ xe 13 Per day cost of parking car in Kuala Lumpur $ 25
This cost applies only if flying is chosen.
© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 8
6.Per Day Cost of Parking Car in Kuala Lumpur ($25) –
This cost applies if the car is taken on the trip.
8
 13-4

Identifying Relevant Costs

Which costs and benefits are relevant in Cynthia’s
decision?

The cost of the The annual cost of

car is a sunk cost insurance is not
and is not relevant. It will remain
relevant to the the same if she drives
current decision. or takes the plane.

However, the cost of gasoline is clearly relevant if she

decides to drive. If she takes the plane, the cost would
not be incurred, so it varies depending on the decision.

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 9

Identifying Relevant Costs

Which costs and benefits are relevant in Cynthia’s
decision?

The cost of The monthly school

maintenance and parking fee is not
repairs is relevant. In relevant because it
the long-run these must be paid if Cynthia
costs depend upon drives or takes the
miles driven. plane.

At this point, we can see that some of the average cost

of $0.619 per mile are relevant and others are not.

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 10

10

Identifying Relevant Costs

Which costs and benefits are relevant in Cynthia’s
decision?

The decline in resale The round-trip airfare

value due to additional is clearly relevant. If
miles is a relevant she drives the cost can
cost. be avoided.

Relaxing on the plane The kennel cost is not

is relevant even relevant because
though it is difficult to Cynthia will incur the
assign a dollar value to cost if she drives or
the benefit. takes the plane.

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 11

11
 13-5

Identifying Relevant Costs

Which costs and benefits are relevant in Cynthia’s
decision?

The cost of parking in

Kuala Lumpur is
relevant because it can
be avoided if she takes
the plane.

The benefits of having a car in Kuala Lumpur

and the problems of finding a parking space
are both relevant but are difficult to assign a
dollar amount.

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 12

12

Identifying Relevant Costs

From a financial standpoint, Cynthia would be better

off taking the plane to visit her friend. Some of the
non-financial factor may influence her final decision.

Relevant Financial Cost of Driving

Gasoline (460 @ $0.100 per mile) $ 46.00
Maintenance (460 @ $0.065 per mile) 29.90
Reduction in resale (460 @ $0.026 per mile) 11.96
Parking in Kuala Lumpur (2 days @ $25 per day) 50.00
Total $ 137.86

Relevant Financial Cost of Taking the Plane

Round-trip ticket $ 104.00

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 13

13

Total and Differential Cost Approaches

The management of a company is considering a new labor saving
machine that rents for $3,000 per year. Data about the company’s
annual sales and costs with and without the new machine are:
Situation Differential
Current With New Costs and
Situation Machine Benefits
Sales (5,000 units @ $40 per unit) $ 200,000 $ 200,000 -
Less variable expenses:
Direct materials (5,000 units @ $14 per unit) 70,000 70,000 -
Direct labor (5,000 units @ $8 and $5 per unit) 40,000 25,000 15,000
Variable overhead (5,000 units @ $2 per unit) 10,000 10,000 -
Total variable expenses 120,000 105,000 -
Contribution margin 80,000 95,000 15,000
Less fixed expense:
Other 62,000 62,000 -
Rent on new machine - 3,000 (3,000)
Total fixed expenses 62,000 65,000 (3,000)
Net operating income $ 18,000 $ 30,000 12,000

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 14

14
 13-6

Total and Differential Cost Approaches

As you can see, the only costs that differ between the
alternatives are the direct labor costs savings and the
increase in fixed rental costs.
Situation Differential
Current With New Costs and
Situation Machine Benefits
Sales (5,000 units @ $40 per unit) $ 200,000 $ 200,000 -
Less variable expenses:
We
Direct materials canunits
(5,000 efficiently analyze the
@ $14 per unit) decision 70,000
70,000 by -
Direct labor looking
(5,000 units at
@ $8
theanddifferent
$5 per unit) costs 40,000
and revenues25,000 15,000
Variable overhead (5,000 units @ $2 per unit) 10,000 10,000 -
Total variable expenses and arrive at the same 120,000 solution. 105,000 -
Contribution margin 80,000 95,000 15,000
Less fixed expense: Net Advantage to Renting the New Machine
Decrease in direct labor costs (5,000 units @ $3 per unit) $ 15,000
Other 62,000 62,000 -
Increase in fixed rental expenses (3,000)
Rent on newNet machine
annual cost saving from renting the new machine - $ 3,000
12,000 (3,000)
Total fixed expenses 62,000 65,000 (3,000)
Net operating income $ 18,000 $ 30,000 12,000

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 15

15

Total and Differential Cost Approaches

Using the differential approach is desirable for

two reasons:
1. Only rarely will enough information be
available to prepare detailed income
statements for both alternatives.
2. Mingling irrelevant costs with relevant costs
may cause confusion and distract attention
away from the information that is really
critical.

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 16

16

Learning Objective 2
Prepare an analysis
showing whether a
product line or other
business segment should
be dropped or retained.

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 17

17
 13-7

Adding/Dropping Segments
One of the most
important decisions
managers make is
whether to add or drop
a business segment.
Ultimately, a decision
to drop an old segment
or add a new one is
going to hinge primarily To assess this impact,
on the impact the it is necessary to
decision will have on carefully analyze
net operating income. the costs.
© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 18

18

Adding/Dropping Segments

Due to the declining popularity of digital

watches, Lovell Company’s digital
watch line has not reported a profit for
several years. Lovell is considering
discontinuing this product line.

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 19

19

A Contribution Margin Approach

DECISION RULE
Lovell should drop the digital watch
segment only if its profit would increase.
Lovell will compare the contribution
margin that would be lost to the costs
that would be avoided if the line was
to be dropped.
Let’s look at this solution.

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 20

20
 13-8

Adding/Dropping Segments
Segment Income Statement
Digital Watches
Sales $ 500,000
Less: variable expenses
Variable manufacturing costs $ 120,000
Variable shipping costs 5,000
Commissions 75,000 200,000
Contribution margin $ 300,000
Less: fixed expenses
General factory overhead $ 60,000
Salary of line manager 90,000
Depreciation of equipment 50,000
Advertising - direct 100,000
Rent - factory space 70,000
General admin. expenses 30,000 400,000
Net operating loss $ (100,000)
© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 21

21

Adding/Dropping Segments
Segment Income Statement
Digital Watches
Sales $ 500,000
An
Less: investigation
variable expenses has revealed that the fixed
Variable manufacturing costs $ 120,000
general factory overhead and
Variable shipping costs
fixed general
5,000
administrative
Commissions expenses will not75,000
be affected200,000
by
dropping the
Contribution digital watch line. The fixed general
margin $ 300,000
Less: fixed expenses
factory overhead and general administrative
General factory overhead $ 60,000
expenses
Salary of lineassigned
manager to this product
90,000would be
reallocated
Depreciation to other product
of equipment lines.
50,000
Advertising - direct 100,000
Rent - factory space 70,000
General admin. expenses 30,000 400,000
Net operating loss $ (100,000)

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 22

22

Adding/Dropping Segments
Segment Income Statement
Digital Watches
Sales $ 500,000
Less: variable expenses
The equipment used to
Variable manufacturing costsmanufacture
$ 120,000
digital
Variable watches
shipping has no resale5,000
costs
Commissions
value or alternative use. 75,000 200,000
Contribution margin $ 300,000
Less: fixed expenses
General factory overhead $ 60,000
Salary of line manager 90,000
Should Lovell
Depreciation of equipment retain or drop
50,000
Advertising - direct the digital watch
100,000segment?
Rent - factory space 70,000
General admin. expenses 30,000 400,000
Net operating loss $ (100,000)

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 23

23
 13-9

A Contribution Margin Approach

Contribution Margin
Solution
Contribution margin lost if digital
watches are dropped $ (300,000)
Less fixed costs that can be avoided
Salary of the line manager $ 90,000
Advertising - direct 100,000
Rent - factory space 70,000 260,000
Net disadvantage $ (40,000)

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 24

24

Comparative Income Approach

The Lovell solution can also be obtained by

preparing comparative income statements
showing results with and without the
digital watch segment.

Let’s look at this second approach.

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 25

25

Comparative Income Approach

Solution
Keep Drop
Digital Digital
Watches Watches Difference
Sales $ 500,000 $ - $ (500,000)
Less variable expenses: -
Manufacturing expenses 120,000 - 120,000
Shipping 5,000 - 5,000
Commissions 75,000 - 75,000
Total variable expenses 200,000 - 200,000
Contribution margin 300,000 - (300,000)
Less fixed expenses:
General factory overhead 60,000
Salary of line manager 90,000
Depreciation 50,000 If the digital watch
Advertising - direct 100,000
Rent - factory space 70,000
line is dropped, the
General admin. expenses 30,000 company loses
Total fixed expenses 400,000 $300,000 in
Net operating loss $ (100,000)
contribution margin.

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 26

26
 13-10

Comparative Income Approach

Solution
Keep Drop
Digital Digital
Watches Watches Difference
Sales $ 500,000 $ - $ (500,000)
Less variable expenses: -
Manufacturing expenses 120,000 - 120,000
Shipping 5,000 - 5,000
Commissions 75,000 - 75,000
Total variable expenses 200,000 - 200,000
Contribution margin 300,000 - (300,000)
Less fixed expenses:
General factory overhead 60,000 60,000 -
Salary of line manager 90,000
Depreciation 50,000
Advertising - direct On 100,000
the other hand, the general
Rent - factory space factory overhead would be the
70,000
General admin. expenses 30,000
Total fixed expenses
same under
400,000
both alternatives,
Net operating loss so it is irrelevant.
$ (100,000)

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 27

27

Comparative Income Approach

Solution
Keep Drop
Digital Digital
Watches Watches Difference
Sales $ 500,000 $ - $ (500,000)
Less variable expenses: -
Manufacturing expenses
The salary of the
120,000
product -
line 120,000
Shipping manager would 5,000disappear, - so 5,000
Commissions it is relevant to the decision.
75,000 - 75,000
Total variable expenses 200,000 - 200,000
Contribution margin 300,000 - (300,000)
Less fixed expenses:
General factory overhead 60,000 60,000 -
Salary of line manager 90,000 - 90,000
Depreciation 50,000
Advertising - direct 100,000
Rent - factory space 70,000
General admin. expenses 30,000
Total fixed expenses 400,000
Net operating loss $ (100,000)

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 28

28

Comparative Income Approach

Solution
Keep Drop
Digital Digital
Watches Watches Difference
Sales $ 500,000 $ - $ (500,000)
The
Less depreciation
variable expenses: is a sunk cost. Also, remember - that
Manufacturing expenses 120,000
the equipment has no resale value or alternative use, - 120,000
Shipping 5,000 - 5,000
so the
Commissions equipment and the depreciation
75,000 expense
- 75,000
associated
Total variable expenseswith it are irrelevant
200,000 to the decision.
- 200,000
Contribution margin 300,000 - (300,000)
Less fixed expenses:
General factory overhead 60,000 60,000 -
Salary of line manager 90,000 - 90,000
Depreciation 50,000 50,000 -
Advertising - direct 100,000
Rent - factory space 70,000
General admin. expenses 30,000
Total fixed expenses 400,000
Net operating loss $ (100,000)

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 29

29
 13-11

Comparative Income Approach

Solution
Keep Drop
Digital Digital
Watches Watches Difference
Sales $ 500,000 $ - $ (500,000)
Less variable expenses: -
Manufacturing expenses 120,000 - 120,000
Shipping The complete
5,000 comparative- 5,000
Commissions income statements
75,000 reveal- that 75,000
Total variable expenses 200,000 - 200,000
Contribution margin Lovell would
300,000earn $40,000- of (300,000)
Less fixed expenses: additional profit by retaining the
General factory overhead 60,000
digital 60,000
watch line. -
Salary of line manager 90,000 - 90,000
Depreciation 50,000 50,000 -
Advertising - direct 100,000 - 100,000
Rent - factory space 70,000 - 70,000
General admin. expenses 30,000 30,000 -
Total fixed expenses 400,000 140,000 260,000
Net operating loss $ (100,000) $ (140,000) $ (40,000)

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 30

30

Beware of Allocated Fixed Costs

Why should we keep the

digital watch segment
when it’s showing a
$100,000 loss?

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 31

31

Beware of Allocated Fixed Costs

The answer lies in the

way we allocate
common fixed costs
to our products.

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 32

32
 13-12

Beware of Allocated Fixed Costs

Including unavoidable Our allocations can

common fixed costs make a segment
makes the product line look less profitable
appear to be unprofitable. than it really is.

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 33

33

Learning Objective 3

Prepare a make or buy

analysis.

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 34

34

The Make or Buy Decision

When a company is involved in more than one

activity in the entire value chain, it is vertically
integrated. A decision to carry out one of the
activities in the value chain internally, rather
than to buy externally from a supplier is called
a “make or buy” decision.

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 35

35
 13-13

Vertical Integration- Advantages

Smoother flow of
parts and materials

Better quality
control

Realize profits

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 36

36

Vertical Integration- Disadvantage

Companies may fail to
take advantage of
suppliers who can
create economies of
scale advantage by
pooling demand from
numerous companies.

While the economics of scale factor can be

appealing, a company must be careful to retain
control over activities that are essential to
maintaining its competitive position.
© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 37

37

The Make or Buy Decision: An Example

 Essex Company manufactures part 4A that is

used in one of its products.
 The unit product cost of this part is:

Direct materials $ 9
Direct labor 5
Variable overhead 1
Depreciation of special equip. 3
Supervisor's salary 2
General factory overhead 10
Unit product cost $ 30

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 38

38
 13-14

The Make or Buy Decision

 The special equipment used to manufacture part 4A
has no resale value.
 The total amount of general factory overhead, which
is allocated on the basis of direct labor hours, would
be unaffected by this decision.
 The $30 unit product cost is based on 20,000 parts
produced each year.
 An outside supplier has offered to provide the 20,000
parts at a cost of $25 per part.

Should we accept the supplier’s offer?

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 39

39

The Make or Buy Decision

Cost
Per
Unit Cost of 20,000 Units
Make Buy
Outside purchase price $ 25 $ 500,000

Direct materials (20,000 units) $ 9 180,000

Direct labor 5 100,000
Variable overhead 1 20,000
Depreciation of equip. 3 -
Supervisor's salary 2 40,000
General factory overhead 10 -
Total cost $ 30 $ 340,000 $ 500,000

The avoidable costs associated with making part 4A include direct

materials, direct labor, variable overhead, and the supervisor’s salary.

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 40

40

The Make or Buy Decision

Cost
Per
Unit Cost of 20,000 Units
Make Buy
Outside purchase price $ 25 $ 500,000

Direct materials (20,000 units) $ 9 180,000

Direct labor 5 100,000
Variable overhead 1 20,000
Depreciation of equip. 3 -
Supervisor's salary 2 40,000
General factory overhead 10 -
Total cost $ 30 $ 340,000 $ 500,000

The depreciation of the special equipment represents a sunk

cost. The equipment has no resale value, thus its cost and
associated depreciation are irrelevant to the decision.

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 41

41
 13-15

The Make or Buy Decision

Cost
Per
Unit Cost of 20,000 Units
Make Buy
Outside purchase price $ 25 $ 500,000

Direct materials (20,000 units) $ 9 180,000

Direct labor 5 100,000
Variable overhead 1 20,000
Depreciation of equip. 3 -
Supervisor's salary 2 40,000
General factory overhead 10 -
Total cost $ 30 $ 340,000 $ 500,000

Not avoidable; irrelevant. If the product is

dropped, it will be reallocated to other products.

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 42

42

The Make or Buy Decision

Cost
Per
Unit Cost of 20,000 Units
Make Buy
Outside purchase price $ 25 $ 500,000

Direct materials (20,000 units) $ 9 180,000

Direct labor 5 100,000
Variable overhead 1 20,000
Depreciation of equip. 3 -
Supervisor's salary 2 40,000
General factory overhead 10 -
Total cost $ 30 $ 340,000 $ 500,000

Should we make or buy part 4A? Given that the total

avoidable costs are less than the cost of buying the part,
Essex should continue to make the part.
© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 43

43

Opportunity Cost
An opportunity cost is the benefit that is
foregone as a result of pursuing some course
of action.
Opportunity costs are not actual cash outlays
and are not recorded in the formal accounts of
an organization.

How would this concept potentially relate to the

Essex Company?

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 44

44
 13-16

Value to Business (Deprival Value)

Deprival value
= Lower of

Replacement Cost (RC) Recoverable Value (RV)

= Higher of

Net Realizable Value (NRV) Value in Use (VIU)

Economic Value (EV) or Present Value (PV)

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 45

45

Opportunity Costs: An Example

Fed Co. Ltd. is considering the publication of a
limited edition of a book, bound in a special grade
of leather.
• The leather was bought some year ago for $500.
• The current price for the same quantity of leather
would be $1,200
• Fed Co. Ltd. Can use the leather to cover desk
furnishings, in replacement for other material
which would cost $400
• Fed Co. Ltd. can sell it with a net disposal
proceeds of $300
How much should the leather be valued for the use
of book bounding?
© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 46

46

Opportunity Cost: Deprival Value Approach

Deprival value
= Lower of $400

Replacement Cost Recoverable Value

(RC) (RV) $400
$1,200 = Higher of

Net Realizable Value Value in Use (VIU)

(NRV) (Economic Value (EV))
$300 $400
© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 47

47
 13-17

Learning Objective 4

Prepare an analysis
showing whether a special
order should be accepted.

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 48

48

Key Terms and Concepts

A special order is a one-time
order that is not considered
part of the company’s normal
ongoing business.

When analyzing a special

order, only the incremental
costs and benefits are
relevant.
Since the existing fixed
manufacturing overhead costs
would not be affected by the
order, they are not relevant.

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 49

49

Special Orders
 Jet Corporation. makes a single product whose normal
selling price is $20 per unit.
 A foreign distributor offers to purchase 3,000 units for
$10 per unit.
 This is a one-time order that would not affect the
company’s regular business.
 Annual capacity is 10,000 units, but Jet Corporation is
currently producing and selling only 5,000 units.

Should Jet accept the offer?

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 50

50
 13-18

Special Orders
Jet Corporation
Contribution Income Statement
Revenue (5,000 × $20) $ 100,000
Variable costs:
Direct materials $ 20,000
Direct labor 5,000
Manufacturing overhead 10,000$8 variable cost
Marketing costs 5,000
Total variable costs 40,000
Contribution margin 60,000
Fixed costs:
Manufacturing overhead $ 28,000
Marketing costs 20,000
Total fixed costs 48,000
Net operating income $ 12,000

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 51

51

Special Orders
If Jet accepts the special order, the incremental
revenue will exceed the incremental costs. In other
words, net operating income will increase by $6,000.
This suggests that Jet should accept the order.

Increase in revenue (3,000 × $10) $ 30,000

Increase in costs (3,000 × $8 variable cost) 24,000
Increase in net income $ 6,000

Note: This answer assumes that the fixed costs are

unavoidable and that variable marketing costs must be
incurred on the special order.

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 52

52

Quick Check 
Northern Optical ordinarily sells the X-lens for $50.
The variable production cost is $10, the fixed
production cost is $18 per unit, and the variable
selling cost is $1. A customer has requested a
special order for 10,000 units of the X-lens to be
imprinted with the customer’s logo. This special
order would not involve any selling costs, but
Northern Optical would have to purchase an
imprinting machine for $50,000.
(see the next page)

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 53

53
 13-19

Quick Check 
What is the rock bottom minimum price below which
Northern Optical should not go in its negotiations
with the customer? In other words, below what
price would Northern Optical actually be losing
money on the sale? There is ample idle capacity to
fulfill the order and the imprinting machine has no
further use after this order.
a. $50
b. $10
c. $15
d. $29

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 54

54

Learning Objective 5
Determine the most
profitable use of a
constrained resource and
the value of obtaining
more of the constrained
resource.

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 55

55

Key Terms and Concepts

When a limited resource of

some type restricts the
company’s ability to satisfy
demand, the company is
said to have a constraint.

The machine or
process that is
limiting overall output
is called the
bottleneck – it is the
constraint.

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 56

56
 13-20

Utilization of a Constrained Resource

 Fixed costs are usually unaffected in these situations,
so the product mix that maximizes the company’s
total contribution margin should ordinarily be
selected.
 A company should not necessarily promote those
products that have the highest unit contribution
margins.
 Rather, total contribution margin will be maximized by
promoting those products or accepting those orders
that provide the highest contribution margin in
relation to the constraining resource.

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 57

57

Utilization of a Constrained Resource: An

Example
Ensign Company produces two products and
selected data are shown below:
Product
1 2
Selling price per unit $ 60 $ 50
Less variable expenses per unit 36 35
Contribution margin per unit $ 24 $ 15
Current demand per week (units) 2,000 2,200
Contribution margin ratio 40% 30%
Processing time required
on machine A1 per unit 1.00 min. 0.50 min.

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 58

58

Utilization of a Constrained Resource: An

Example

 Machine A1 is the constrained resource

and is being used at 100% of its capacity.
 There is excess capacity on all other
machines.
 Machine A1 has a capacity of 2,400
minutes per week.

Should Ensign focus its efforts on

Product 1 or Product 2?

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 59

59
 13-21

uu tiên so có cm per unit per direct labor hours

Quick Check 
How many units of each product can be
processed through Machine A1 in one minute?

Product 1 Product 2
a. 1 unit 0.5 unit
b. 1 unit 2.0 units
c. 2 units 1.0 unit
d. 2 units 0.5 unit

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 60

60

Quick Check 

What generates more profit for the company, using

one minute of machine A1 to process Product 1 or
using one minute of machine A1 to process Product 2?
a. Product 1
b. Product 2
c. They both would generate the same profit.
d. Cannot be determined.

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 61

61

Utilization of a Constrained Resource

The key is the contribution margin per unit of the
constrained resource.
Product
1 2
Contribution margin per unit $ 24 $ 15
Time required to produce one unit ÷ 1.00 min. ÷ 0.50 min.
Contribution margin per minute $ 24 $ 30

Ensign should emphasize Product 2 because it

generates a contribution margin of $30 per minute
of the constrained resource relative to $24 per
minute for Product 1.

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 62

62
 13-22

Utilization of a Constrained Resource

The key is the contribution margin per unit of the
constrained resource.
Product
1 2
Contribution margin per unit $ 24 $ 15
Time required to produce one unit ÷ 1.00 min. ÷ 0.50 min.
Contribution margin per minute $ 24 $ 30

Ensign can maximize its contribution margin

by first producing Product 2 to meet customer
demand and then using any remaining
capacity to produce Product 1. The
calculations would be performed as follows.

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 63

63

Utilization of a Constrained Resource

Let’s see how this plan would work.
Alloting Our Constrained Resource (Machine A1)

Weekly demand for Product 2 2,200 units

Time required per unit × 0.50 min.
Total time required to make
Product 2 1,100 min.

2400

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 64

64

Utilization of a Constrained Resource

Let’s see how this plan would work.
Alloting Our Constrained Resource (Machine A1)

Weekly demand for Product 2 2,200 units

Time required per unit × 0.50 min.
Total time required to make
Product 2 1,100 min.

Total time available 2,400 min.

Time used to make Product 2 1,100 min.
Time available for Product 1 1,300 min.

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 65

65
 13-23

Utilization of a Constrained Resource

Let’s see how this plan would work.
Alloting Our Constrained Resource (Machine A1)

Weekly demand for Product 2 2,200 units

Time required per unit × 0.50 min.
Total time required to make
Product 2 1,100 min.

Total time available 2,400 min.

Time used to make Product 2 1,100 min.
Time available for Product 1 1,300 min.
Time required per unit ÷ 1.00 min.
Production of Product 1 1,300 units

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 66

66

Utilization of a Constrained Resource

According to the plan, we will produce 2,200

units of Product 2 and 1,300 of Product 1.
Our contribution margin looks like this.

Product 1 Product 2
Production and sales (units) 1,300 2,200
Contribution margin per unit $ 24 $ 15
Total contribution margin $ 31,200 $ 33,000

The total contribution margin for Ensign is $64,200.

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 67

67

Quick Check 
Colonial Heritage makes reproduction colonial
furniture from select hardwoods.
C hairs Tables
S elling price per unit $80 $400
V ariable cost per unit $30 $200
B oard feet per unit 2 10
M onthly dem and 600 100

The company’s supplier of hardwood will only

be able to supply 2,000 board feet this month. Is
this enough hardwood to satisfy demand?
a. Yes
b. No

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 68

68
 13-24

Quick Check 
C hairs T ables
Selling price per unit $80 $400
Variable cost per unit $30 $200
Board feet per unit 2 10
M onthly dem and 600 100

The company’s supplier of hardwood will only

be able to supply 2,000 board feet this month.
What plan would maximize profits?
a. 500 chairs and 100 tables
b. 600 chairs and 80 tables
c. 500 chairs and 80 tables
d. 600 chairs and 100 tables
© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 69

69

Quick Check 
As before, Colonial Heritage’s supplier of hardwood
will only be able to supply 2,000 board feet this
month. Assume the company follows the plan we
have proposed. Up to how much should Colonial
Heritage be willing to pay above the usual price to
obtain more hardwood?
a. $40 per board foot
b. $25 per board foot
c. $20 per board foot
d. Zero

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 70

70

Quick Check 

As before, Colonial Heritage’s supplier of hardwood

The additional
will only wood
be able to would
supply 2,000 be used
board feetto make
this
tables.
month. In this
Assume use, each
the company board
follows foot
the planofwe
have proposed.
additional woodUp to how
will allowmuch
the should
companyColonial
to earn
Heritage
an be willing
additional $20toofpay above the usual
contribution priceand
margin to
obtain more hardwood?
profit.
a. $40 per board foot
b. $25 per board foot
c. $20 per board foot
d. Zero

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 71

71
 13-25

Managing Constraints
It is often possible for a manager to increase the capacity of a
bottleneck, which is called relaxing (or elevating) the constraint,
in numerous ways such as:
1. Working overtime on the bottleneck.
2. Subcontracting some of the processing that would be done
at the bottleneck.
3. Investing in additional machines at the bottleneck.
4. Shifting workers from non-bottleneck processes to the
bottleneck.
5. Focusing business process improvement efforts on the
bottleneck.
6. Reducing defective units processed through the bottleneck.

These methods and ideas are all consistent with the Theory
of Constraints, which was introduced in Chapter 1.

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 72

72

Learning Objective 6

Prepare an analysis
showing whether joint
products should be sold at
the split-off point or
processed further.

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 73

73

Joint Costs

 In some industries, a number of end

products are produced from a single raw
material input.
 Two or more products produced from a
common input are called joint products.
 The point in the manufacturing process
where each joint product can be
recognized as a separate product is
called the split-off point.

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 74

74
 13-26

Joint Products dàn khoai khai thác lên được nhiều loại
For example,
Oil in the petroleum
refining industry,
a large number
Common of products are
Joint
Input
Production Gasoline extracted from
Process crude oil,
including
gasoline, jet fuel,
Chemicals
home heating oil,
lubricants,
asphalt, and
Split-Off various organic
Point chemicals.

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 75

75

Joint Products
Joint costs
are incurred
up to the Oil
Separate Final
split-off point Processing Sale

Common
Joint Final
Production Gasoline
Input Sale
Process

Separate Final
Chemicals
Processing
Sale

Split-Off Separate
Point Product
Costs
© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 76

76

The Pitfalls of Allocation

Joint costs are traditionally
allocated among different
products at the split-off point.
A typical approach is to allocate
joint costs according to the
relative sales value of the end
products.
Although allocation is needed for
some purposes such as balance
sheet inventory valuation,
allocations of this kind are very
dangerous for decision making.
© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 77

77
 13-27

Sell or Process Further

Joint costs are irrelevant in decisions regarding
what to do with a product from the split-off point
forward. Therefore, these costs should not be
allocated to end products for decision-making
purposes.

With respect to sell or process further decisions, it is

profitable to continue processing a joint product
after the split-off point so long as the incremental
revenue from such processing exceeds the
incremental processing costs incurred after the
split-off point.

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 78

78

Sell or Process Further: An Example

 Sawmill, Inc. cuts logs from which unfinished
lumber and sawdust are the immediate joint
products.
 Unfinished lumber is sold “as is” or processed
further into finished lumber.
 Sawdust can also be sold “as is” to gardening
wholesalers or processed further into “presto-
logs.”

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 79

79

Sell or Process Further

Data about Sawmill’s joint products includes:
Per Log
Lumber Sawdust
Sales value at the split-off point $ 140 $ 40

Sales value after further processing 270 50

Allocated joint product costs 176 24
Cost of further processing 50 20

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 80

80
 13-28

Sell or Process Further

Analysis of Sell or Process Further

Per Log
Lumber Sawdust

Sales value after further processing $ 270 $ 50

Sales value at the split-off point 140 40
Incremental revenue 130 10
Cost of further processing
Profit (loss) from further processing

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 81

81

Sell or Process Further

Analysis of Sell or Process Further

Per Log
Lumber Sawdust

Sales value after further processing $ 270 $ 50

Sales value at the split-off point 140 40
Incremental revenue 130 10
Cost of further processing 50 20
Profit (loss) from further processing $ 80 $ (10)

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 82

82

Sell or Process Further

Analysis of Sell or Process Further

Per Log
Lumber Sawdust

Sales value after further processing $ 270 $ 50

Sales value at the split-off point 140 40
Incremental revenue 130 10
Cost of further processing 50 20
Profit (loss) from further processing $ 80 $ (10)

The lumber should be processed

further and the sawdust should be
sold at the split-off point.

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 83

83
 13-29

Activity-Based Costing and Relevant Costs

ABC can be used to help identify potentially relevant

costs for decision-making purposes.

However, managers should

exercise caution against reading
more into this “traceability” than
really exists.

People have a tendency to assume that if a cost is traceable to a

segment, then the cost is automatically avoidable, which is untrue.
Before making a decision, managers must decide which of the
potentially relevant costs are actually avoidable.

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 84

84

End of Chapter 14

© 2015 McGraw-Hill Education Garrison, Noreen, Brewer, Cheng & Yuen 85

85