Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
2 views

Plate exchanger API sheet

The document provides a specification sheet for a plate heat exchanger, detailing the operational parameters and fluid properties for both hot and cold sides. It includes data on flow rates, pressure drops, temperatures, and heat transfer coefficients, as well as configuration details such as the number of plates and passes. The total heat exchanged is reported at 4,433,275 kcal/h with a heat transfer area of 1134 m².

Uploaded by

Hafiz Muhammad Ali Ejaz
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
2 views

Plate exchanger API sheet

The document provides a specification sheet for a plate heat exchanger, detailing the operational parameters and fluid properties for both hot and cold sides. It includes data on flow rates, pressure drops, temperatures, and heat transfer coefficients, as well as configuration details such as the number of plates and passes. The total heat exchanged is reported at 4,433,275 kcal/h with a heat transfer area of 1134 m².

Uploaded by

Hafiz Muhammad Ali Ejaz
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Aspen Exchanger Design and Rating Plate V12

File: C:\Users\hafiz\OneDrive\Documents\AbdurRahman Cooling Exchanger.EDR Printed: 25/03/2025 at 1:21:03 pm

API Sheet

Plate Heat Exchanger Specification Sheet


1 Company:
2 Location:
3 Service of Unit: Our Reference:
4 Item No.: Your Reference:
5 Date: Rev No.: Job No.:
6 CASE HOT SIDE COLD SIDE
7 Fluid Hotter Stream Chilled Water
8 Total flow kg/h 818000 818000
9 Flow per PHE kg/h 409000 409000
10 Pressure drop (allow./calc.) kgf/cm² 0.714 / 0.44 0.714 / 0.44
11 Velocity between plates m/s 0.16 0.16
12 Wall shear stress kgf/m² 1.21 1.22
13 Fouling margin % 0 0
14 OPERATING DATA INLET OUTLET INLET OUTLET
15 Liquid flow kg/h 818000 818000 818000 818000
16 Vapor flow kg/h 0 0 0 0
17 Operating temperature °C 14 9 7 12
18 Operating pressure kgf/cm² 7.138 6.698 7.138 6.698
19 LIQUID PROPERTIES
20 Density kg/m³ 1004.6 1009.36 1011.25 1006.51
21 Specific heat kcal/(kg-C) 1.0817 1.0827 1.0831 1.0821
22 Viscosity cp 1.1781 1.3357 1.407 1.2379
23 Thermal conductivity kcal/(h-m-C) 0.508 0.501 0.498 0.505
24 Surface tension dynes/cm 37.3 38 38.2 37.6
25 VAPOR PROPERTIES
26 Density kg/m³
27 Specific heat kcal/(kg-C)
28 Viscosity cp
29 Thermal conductivity kcal/(h-m-C)
30 Relative molecular mass
31 Dew point / bubble point °C / /
32 Latent heat kcal/kg
33 Critical pressure bar 220.64001 220.64
34 Critical temperature °C 373.95 373.95
35 Total heat exchanged kcal/h 4433275
36 Overall coefficient (U) kcal/(h-m²-C) Clean condition: 1960.1 Service: 1960.1
37 LMTD / Effective MTD °C 0 / 2
38 Heat transfer area m² 1134
39 Stream heat transfer coeff. kcal/(h-m²-C) 4299.9 4236.8
40 CONFIGURATION FOR EXCHANGER AND PLATE DETAILS
41 Number of PHE in parallel 2 Heat transfer area/PHE m² 1134
42 Number of passes, hot side 1 Heat transfer area/plate m² 0.84
43 Number of passes, cold side 1 Plate chevron angles(s) Degrees 30
44 Number of plates per PHE 677 Nominal plate thickness mm 0.5
45 Nominal plate gap mm 3.4
46 Mass empty / full of water kg 2535.9 / 7009.8
47 Remarks:
48
49
50

You might also like