MP1700 Install Manual en

MP1700E Series Installation Manual V1.
MP1700E Series Routers
Installation Manual V1.4
Maipu Communication Technology Co., Ltd

No. 16, Jiuxing Avenue Hi-tech Park Chengdu, Sichuan Province Peoples Republic of China - 610041 Tel: (86) 28-85148850, 85148041 Fax: (86) 28-85148948 URL: http:// www.maipu.com Email: overseas@maipu.com
Maipu Confidential & Proprietary Information
Page 1 of 49
MP1700E Series Installation Manual V1.4
All rights reserved. Printed in the Peoples Republic of China. No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise without the prior written consent of Maipu Communication Technology Co., Ltd. Maipu makes no representations or warranties with respect to this document contents and specifically disclaims any implied warranties of merchantability or fitness for any specific purpose. Further, Maipu reserves the right to revise this document and to make changes from time to time in its content without being obligated to notify any person of such revisions or changes. Maipu values and appreciates comments you may have concerning our products or this document. Please address comments to:
Maipu Communication Technology Co., Ltd

No. 16, Jiuxing Avenue Hi-tech Park Chengdu, Sichuan Province Peoples Republic of China - 610041 Tel: (86) 28-85148850, 85148041 Fax: (86) 28-85148948 URL: http:// www.maipu.com Email: overseas@maipu.com
All other products or services mentioned herein may be registered trademarks, trademarks, or service marks of their respective manufacturers, companies, or organizations.
Document History
Date 20/09/2007 Revision No. R1.0 Description The MP1700E Series Installation Manual V1.4 provides information about the installation of routers designed and developed by Maipu Communication Technology Co., Ltd
Page 2 of 49
Maipu Feedback Form

Your opinion helps us improve the quality of our product documentation and offer better services. Please fax your comments and suggestions to (86) 28-85148948, 85148139 or email to overseas@maipu.com.
Document Title Product Version Evaluate this document MP1700E SERIES INSTALLATION MANUAL V1.4 Document Revision Number 1.0
Presentation: (Introductions, procedures, illustrations, completeness, arrangement, appearance) Good Fair Average Poor Accessibility: (Contents, index, headings, numbering) Good Fair Average Poor Editorial: (Language, vocabulary, readability, clarity, technical accuracy, content) Good Fair Average Poor
Your suggestions to improve the document
Please check suggestions to improve this document: Improve introduction Make more concise Improve Contents Add more step-by-step procedures/tutorials Improve arrangement Add more technical information Include images Make it less technical Add more detail Improve index
If you wish to be contacted, complete the following: Name Postcode Telephone Company Address Email
Page 3 of 49
Contents
Installation Manual ....................................................................................7

Purpose .................................................................................................................7 How to Get in Touch ...............................................................................................7
Customer Support...................................................................................................................7 Documentation Support...........................................................................................................7
Overview.....................................................................................................8 Product Features ........................................................................................9 Hardware Features.................................................................................. 11

MP1700E Router Appearance................................................................................. 11 MP1700E Front Panel ............................................................................................ 11 MP1700E Back Panel............................................................................................. 13 MP1700E System ................................................................................................. 14 Product Functions ................................................................................................. 15 MP1700E Main Board ............................................................................................ 17
Modules.................................................................................................... 19
Sync/Async Serial Interface Module (SAE) Series..................................................... 19
1-port High-speed V.24/V.35 Serial Module (1SAE).................................................................19 1SAE Interface Module ..........................................................................................................20 1SAE interface module connected cable..................................................................................20 1SAE Interface Attributes.......................................................................................................20
Channelized E1 Module (CE1) Series ...................................................................... 21

1-port channelized E1 Module (1CE1).....................................................................................21 1CE1 Interface & Indicator.....................................................................................................21 1CE1 Interface Module Connected Cable ................................................................................21
Non-channelized E1 Series .................................................................................... 22
Page 4 of 49
1-port Non-channelized E1 (1E1) ...........................................................................................22
Frequency-band MODEM M336 Series .................................................................... 23

1-port 33.6K Frequency-band MODEM (1M336) .....................................................................23
Base-band MODEM (M128) Series.......................................................................... 25

1-port 128K Base-band MODEM (1M128)...............................................................................25
ISDN (U) Series.................................................................................................... 26

1-port ISDN U Module (1U)....................................................................................................26
IP Module (VOP/VOS) Series.................................................................................. 28

1-port VoIP Module (1VOP)....................................................................................................28 2-port VoIP Module (2VOP)....................................................................................................29 1-port Switch VoIP Module (1VOS).........................................................................................30 2-port Switch VoIP Module (2VOS).........................................................................................31
Ethernet Module (ETE) Series ................................................................................ 33

1-port Ethernet Module (1ETE) ..............................................................................................33
ISDN S/T Module (ST) Series................................................................................. 34

1-port ISDN S/T Module (1ST)...............................................................................................34
System Installation ................................................................................. 35

Preparation .......................................................................................................... 35
Environment Requirements....................................................................................................35 Check Router & Accessories ...................................................................................................36
Chassis Installation ............................................................................................... 37

Tools & Equipment ................................................................................................................37 Machine Installation...............................................................................................................38 Connecting Power Supply ......................................................................................................38 Main Control Board Cable Connection.....................................................................................39 Console Port Connection ........................................................................................................39 Grounding Wire Connection ...................................................................................................39 Module Installation ................................................................................................................40 Rack/Desk ............................................................................................................................40 Panel Wire Connection...........................................................................................................40 Hardware Installation ............................................................................................................41
Page 5 of 49
Module Interface Cable Connection ........................................................................ 42

1SA Module Cable Connection................................................................................................42 1CE1/1E1 Module Cable Connection.......................................................................................44 1M336 Module Cable Connection............................................................................................44 1M128 Module Interface Cable Connection .............................................................................45 1U Module Interface Cable Connection ...................................................................................45 1VOP/2VOP Module Cable Connection ....................................................................................45 1VOS/2VOS Module Cable Connection....................................................................................45 1ETE Module Cable Connection ..............................................................................................46 1ST Module Cable Connection................................................................................................46
Interface Cable Signal............................................................................. 47

Ethernet Interface Cable........................................................................................ 47 Console Port Cable................................................................................................ 48 RM2-1E1 & RM2-1CE1 Uses RJ45-RJ45 Cross-cable................................................. 49
Page 6 of 49
Installation Manual
Purpose
The MP1700E Series Installation Manual V1.4 provides technical information to understand the installation issues of the routers. The document provides right answers to your technical queries.
How to Get in Touch

The following sections provide information on how to obtain support for the Maipu English documentation and products.
Customer Support
If you have problems or questions regarding your product, please contact us by e-mail at overseas@maipu.com. You can also call our International Business Department over +8628-85148850, 85148041, 85148050, 85148750, and 85148997.
Documentation Support
Maipu Communication Technology Co., Ltd welcomes comments and suggestions on the document usefulness. For further queries or suggestions, contact us by e-mail overseas@maipu.com or fax comments to +86-28-85148948. You can visit our website at http://www.maipu.com, which comprises interesting subjects such as product knowledge base, sales & support, and the Maipu news.
Page 7 of 49
Overview
MP1700E router is highly beneficial for finance, telecom, tax, and public security industries and large & medium enterprises. The routers provide a series of highly efficient and low cost network interconnection solution for integration and powerful functions. The router supports: Internet connection Multi-service data integration Branch dialup & backup service Internet & Extranet access
Page 8 of 49
Product Features
High performance & reliability The MP1700E series router CPU provides high performance and RISC communication processor. The software adapts high performance and reliable RTOS and network program design. High port integration - The MP1700E series router has two fixed 10/100M fast Ethernet ports, one high-speed asynchronous interface (1SAE), and voice card and MIM slots. It has powerful multi-port access performance, which provides high price-performance ratio network solution. Modular system structure - The MP1700E series router adapts modular system, which provides different interface configuration. They support various optional interface modules and interface cards, and customers choose different extending interfaces and modules such as Ethernet interface, sync/async interface, asynchronous interface, E1/CE1 interface, ISDN-U IST interface, baseband MODEM, frequency band MODEM and VOP/VOS interface. They also support the site upgrade of all core software and modular components. Routing/transmission integration - The MP1700E series router integrates CSU/DSU, sync 33.6K MODEM, asynchronous 33.6K MODEM, ISDN NT1 and ISDN TE into router to provide required solutions. Universality - The MP1700E series router supports a series of Internet protocol standard (RFC) and international communication network standard.
Page 9 of 49
Structure - The hardware design adapts lower power consumption design and integrated structure design, which has powerful performance on radiation and EMC.
Page 10 of 49
Hardware Features
MP1700E Router Appearance
MP1700E router
MP1700E Front Panel
MP1700E front panel
Page 11 of 49
Indicators from left to right: SYS & PWR (system and power supply indicator) SYS - System status indicator. It shines fast when system is loading, and after that it shines slowly PWR - System power supply indicator, and it is on after power on. SLOT1 (slot 1 status indicator) ACT - voice card module data indicator RDY - voice card module link status indicator SLOT 0 (slot 0 status indicator) ACT - inserted module data indicator RDY - inserted module link status indicator SA (fixed sync/async serial status indicator) ACT - sync/async serial data indicator LINK - sync/async serial link status indicator CONSOLE (console port) TXD - console port data sending indicator RXD - console port data receiving indicator ETHERNET1 (Ethernet interface1) 100M - 10/100M Ethernet interface data rate indicator. On: 100Moff: 10M ACT - Ethernet interface data indicator ETHERNET0 (Ethernet interface 0) 100M - 10/100M Ethernet interface data rate indicator. On: 100M/off: 10M ACT - Ethernet interface data indicator
Page 12 of 49
MP1700E Back Panel
MP1700E back panel interface configuration
MP1700E back panel interface:

Interface ON/OFF INPUT SLOT1 SLOT0 Decided by interface module DB25 pin Form Description Power supply switch, right is OFF; left is ON AC 100-240V 1A input Bus slot High-speed serial, bus slot High-speed serial VOP/VOS module MIM module Application
S/A
High-speed fixed sync/async interface
SLOT1 is voice card module slot for VOP/VOS series module; SLOT0 is MIM slot, adopting modularization design, and its function can be realized according to different interface card and relevant software modules.
Page 13 of 49
MP1700E System
MP1700E router basic configuration and working environment:
Item Console port Ethernet interface SA interface Voice card slot MIM slot Processor FLASH SDRAM Dimension (WDH) Power supply input voltage Environment Temperature Environment humidity Power supply rating power Maximum power consumption Description One fixed, async DTE working mode (RJ45) Two fixed 10/100Mbps fast Ethernet (RJ45) One fixed high-speed async/sync interface (DB25) One voice card SLOT1 MIM SLOT0, supports various modules High performance PowerPC processor 8MB 64MB 34023044 (mm) AC: 100 240V 50/60HzDC: 4057V - only MP1700E supports. AC/DC. 0-40 10-90%. Non-condensing 45W 15W
MP1700E router doesnt have asynchronous interfaces with modular and clip design.
Page 14 of 49
Product Functions
MP1700E functions, supported protocols & services:
Supported protocols & Services Network protocol Description WAN supports: PPP PPP compression SLIP CSLIP Frame relay Frame relay switching X.25 X.25 switching HDLC LAPB ISDN LAN is Ethernet network, and it supports two kinds of link layer frame format: Ethernet-II Ethernet-SNAP Dialup network MODEM dialupcall in/call out CALLBACK Dialup on demand Dialup backup Routing protocol Static routing Dynamic routing: RIPv1 RIPv2 OSPF BGP IRMP (compatible with CISCO EIGRP protocol) SNSP (compatible with CISCO ODR protocol) Dial-on-demand routing (DDR) Policy routing Multicast: IGMP PIM-SM PIMDM DVMRP Hot backup: VRRP VBRP (compatible with CISCO HSRP protocol) Network service ARP
Page 15 of 49
Proxy ARP L2TP Configuration command protection IP packet filtering firewall IP UNNUMBERED IP policy routing DHCP relay PAP/CHAP check EASY IP NAT network concealing RADIUS check IPSEC data encryption IKE GRE Load balance MPLS QoS service PQ CQ WFQ CBWFQ LLQ WRED CAR SNMPv1, SNMPv2, SNMPv3 Supporting standard network management (fully compatible with CISCO) Configuration via Console port Local or remote login via local Telnet Configuration command security isolation function Chinese/English prompting and help information Debugging information, for troubleshooting. Login and managing other products via Telnet Download and upload configuration file and application program by FTP Download and upload configuration file and application program by TFTP Colorful distributing debugging information Log function IP packet filtering firewall, PAP/CHAP, MD5, NAT, RADIUS, TACACS, IPsec data encryption
Network management
Security
Page 16 of 49
MP1700E Main Board

The MP1700E main board includes 12/4/4 fixed interface, one voice card slot, one MIM slot, eight indicators and power supply slots. Fixed interface The MP1700E provides fixed console port, Ethernet interface, high-speed sync/async interface and asynchronous serial, which is totally 12/4/4 fixed interfaces. Console port Console port attributes:
Attributes Converter type Interface standard BR Supported service Description RJ45 RS232 9600bps - 115200bps Connect to character terminal Connect to local PC serial, and operate terminal emulation program command line interface on PC
Ethernet interface Ethernet interface attributes:

Attributes Converter type Interface number Supported frame format Description RJ45 2 Ethernet_II Ethernet_SNAP IEEE 802.2 IEEE 802.3 10M/100M adaptive Full/half-duplex Auto across IP Novell IPX
Working mode
Supported network protocol
Page 17 of 49
Fixed high-speed sync/async interface Fixed high-speed sync/async interface attributes:

Attributes Converter type Interface standard and working mode Description Synchronous DB25 V.24 DTE DCE 1200 128K X25 HDLC PPP SLIP FR LAPB V.35 DTE DCE 1200 8M 300 115.2K Dialup Backup HDLC PPP SLIP Asynchronous DB25 EIA/TIA-232
Minimum (bps) Maximum (bps) Supported protocols & Services
Slot MP1700E series router has two slots: SLOT0 and SLOT1. SLOT0 is MIM module slot, and it supports Ethernet interface module, sync/async interface module, asynchronous interface module, E1/CE1 interface module, U interface module, ST interface module, baseband MODEM interface module, frequency band MODEM module, VOP/VOS module. It is compatible with MP17XXMP26XX series router function module. SLOT1 is voice card slot for VOP/VOS card module, which can access any telephone via dialup or second dialup; you can realize free phone call in network by IP network.
Page 18 of 49
Modules
MP1700E router is modular router and provides two slots. SLOT1 is voice card slot for VOP and VOS series voice modules. SLOT0 is MIM slot compatible with all serial interface modules. Supported modules are 1SAE, 1CE1, 1E1, 1M336, 1M128, 1U, 1VOP, 2VOP, 1VOS, 2VOS, 1ETE, 1ST and 8AX.
Sync/Async Serial Interface Module (SAE) Series

1-port High-speed V.24/V.35 Serial Module (1SAE)
1SAE module is applied for MP1700E router, and its main function is to complete the processing of 1port sync/async serial data flow. For synchronization, DCE working mode is 2.048Mbps; DTE working mode is 8Mbps. For Asynchronization, it is 115.2Kbps. The MP1700E router serial interface default working mode is in synchronous mode. Synchronous serial interface works in DTE or DCE mode. In DTE mode, it receives external DCE clock, such as external modem; while in the mode of DCE, router provides clock. V24/V35 mode switch is through panel.
Page 19 of 49
1SAE Interface Module
1-port high-speed V.24/V.35 serial module1SAE
1SAE interface module connected cable

1SAE module interface cable is V35 DTE cable and V24 connected DTE cable.
1SAE Interface Attributes

1SAE module interface attributes: 1-port high-speed V.24/V.35 serial module (1SAE) attributes:
Attributes Tie-in Interface standard and working mode Minimum baud rate (bps) Maximum baud rate (bps) Supported protocols & services Description Sync DB25-DB25 V.24 DTE DCE 1200 128K X25 HDLC PPP SLIP FR LAPB V.35 DTE DCE 1200 8M 300 115.2K Dialup Backup HDLC PPP SLIP Async DB25-DB25 EIA/TIA-232
Page 20 of 49
Channelized E1 Module (CE1) Series

1-port channelized E1 Module (1CE1)
1-port channelized E1 module main function is to provide 1984K multitimeslot data flow receiving and sending and processing port. As CE1 interface, it divides slot 1-31 to different groups, and each group timeslot after binding can be used as one interface.
1CE1 Interface & Indicator

1CE1 interface:
1-port channelized E1 (1CE1)

1-port channelized E1 (1CE1) indicator: LOS On: Can not check frame sync signal Off: After sync
1CE1 Interface Module Connected Cable

1CE1 and BNC pin coaxial cable and RJ45-RJ45 straight connected twistedpair cable.
Page 21 of 49
1CE1 Interface Module Attributes

1-port channelized E1 (1CE1) attributes:
Attributes Interface Interface number Interface standard Supported protocol Description BNC 1 group G.703 PPP X.25 HDLC FR
Non-channelized E1 Series
1-port Non-channelized E1 (1E1)
1port non-channelized E1 module provides a data transmission port with 2.048Mbit/s bandwidth. E1 is same as CE1, it can be divided into 32 timeslots, and timeslot 0 of E1 can be used to transmit data in unframed mode, to realize 2M transparent transmission.
1 E 1 I n t e r f a ce M o d u l e & Ind i c a t o r
1E1 interface module:
1-port non-channelized E11E1 1-port non-channelized E11E1indicator:

LOS On: transparent 2M transmission; on: non-transparent and cannot check frame synch signal; off: after synch.
Page 22 of 49
1 E 1 I n t e r f a ce C o nne c t e d C a b l e
1E1 and BNC pin coaxial cable and RJ45-RJ45 straight connected twistedpair cable.
1 E 1 I n t e r f a ce A t t r i b u t e s
1E1 interface attributes: 1-port non-channelized E1 (1E1) attributes:
Attributes Interface Interface number Interface standard Supported service Supported protocol Description BNC 1 group G.703 X.25 FR PPP HDLC
Frequency-band MODEM M336 Series

1-port 33.6K Frequency-band MODEM (1M336)
1-port 33.6K frequency-band MODEM is same as out-built or inbuilt MODEM. Its interface works in the mode of synch or async. It also supports leased line or dialup line working mode.
Page 23 of 49
1M336 Interface Module & DIP Switch

1M336 interface module:
1-port 33.6K frequency-band MODEM (1M336) DIP switch: 1-port 33.6K frequency-band MODEM (1M336) DIP switch:
Mode Frequency-band MODEM mode Console port mode DIP switch 1 OFF ON 2 OFF OFF LINE is used as inbuilt frequency-band MODEM interface. LINE is used as CONSOLE port. Description
1M336 Interface Module Connected Cable

1M336 module connected cable is RJ45 (4, 5 signal line) or RJ11line.
1M336 Module Interface Attri butes

1-port 33.6K frequency-band MODEM (1M336) interface:
Attributes Tie-in Interface number Supported link protocol Description RJ45 1 PPP FR X.25 HDLC IP
Supported network protocol
Page 24 of 49
Base-band MODEM (M128) Series

1-port 128K Base-band MODEM (1M128)
1M128 Interface Module, I n d i c a t o r & D IP Switch
1M128 interface module:
1-port 128K baseband MODEM (1M128) Indicator description: 1-port 128K base-band MODEM (1M128) indicator:
ACT
On: Link established.

B1 channel indicator LED on: When using channel B1, and rate is 64K B2 channel indicator LED on: When using channel B2, and the rate is 128K
B1 B2
DIP switch: 1-port 128K baseband MODEM (1M128) DIP switch:

Mode Loopback DIP switch 1 ON 2 Reserved Description
Page 25 of 49
1M128 Interface Connected Cable

1M336 module connected cable is RJ45 (4, 5 signal line) or RJ11 telephone line.
1M128 Interface Attribut es

1M128 interface attributes: 1-port 128K base-band MODEM (1M128) interface:
Attributes Tie-in Interface number Supported link protocol Supported network protocol Description RJ45 1 PPP frame relay X.25 HDLC IP
ISDN (U) Series

1-port ISDN U Module (1U)
1port ISDN U module connects DDN network and ISDN network, and not to connect modem.
1U Module & Indicator

1U module:
Page 26 of 49
Indicator description: 1-port ISDN U module (1U) indicator:

ACT B1 B2 The LED on after link established B1 channel indicator LED on: when using channel B1, and rate is 64K B2 channel indicator LED on: when using channel B2, and the rate is 128K
1-port ISDN U module (1U) DIP switch:

Mode Loopback DIP switch 1 ON 2 Reserved Description
1U Module Connected Cable

1U module connected cable RJ45 (4, 5 signal line) or RJ11 telephone line.
1U Interface Attributes
1U interface attributes: 1-port ISDN U module (1U) interface attributes:
Attributes Tie-in Interface number Supported link protocol Supported network protocol Description RJ45 1 PPP IP
Page 27 of 49
IP Module (VOP/VOS) Series

1-port VoIP Module (1VOP)
1-port VoIP module accesses any telephone through IP network; You can
easily realize free phone call through IP network.
1VOP Module Indicator

1VOP interface module:
1-port VoIP module (1VOP)
1-port VoIP module (1VOP) indicator: V1 V2 VoIP module indicator. The LED is on during the call. 1VOP module may not have this LED, and if it has, the LED will be not on.
1 V O P M o d u l e C o nne c t e d C a b l e
1VOP module connected cable is RJ45 (4, 5 signal line) and RJ11 telephone line.
Page 28 of 49
1 V O P Int e r f a c e A t t r i b u t e s
1-port Voice module (1VOP) interface attributes: Attributes Interface Interface number Supported protocol Description RJ45 jack 1 H.225 H.245 RTP RTCP G.711 G.723 G.729
2-port VoIP Module (2VOP)

2-port VoIP module may access any call in IP network via dialup; you can realize free phone call via IP network.
2VOP Module & Indicator

2VOP module:
2-port VoIP module (2VOP)
2-port VoIP module (2VOP) indicators: V1 V2 VoIP module indicator. LED on: after pickup, during the call. VoIP module indicator. LED on: after pickup, during the call.
2 V O P M o d u l e C o nne c t e d C a b l e
2VOP module connected cable is RJ45 external cable.
Page 29 of 49
2VOP Module Interface Attributes

2VOP interface attributes: 2-port VoIP module (2VOP) interface attributes: Attributes Interface Interface number Supported protocol Description RJ45 jack (two RJ11 plugs) 2 (RJ11) H.225 H.245 RTP RTCP G.711 G.723 G.729
1-port Switch VoIP Module (1VOS)

1-port switch VoIP module may access any phone in IP network through dialup or second dialup; you can easily realize free phone call through IP network.
1VOS Module & Indicator

1VOS module:
1-port switch VoIP module (1VOS) Indicator description: 1-port switch VoIP module (1VOS) indicator: V1 V2 VoIP module indicator. LED on: During the phone call. 1VOS module may not have this LED. Otherwise, the LED will never be on.
Page 30 of 49
1 V O S M o d u l e C o nne c t e d C a b l e
1VOS module connected cable is RJ45 (4, 5 signal line) and RJ11 cable.
1 V O S I n t e r fa c e A t t r i b ut es
1-port switch VoIP module (1VOS) interface attributes: Attributes Interface Interface number Supported protocol Description RJ45 jack 1 H.225 H.245 RTP RTCP G.711 G.723 G.729
2-port Switch VoIP Module (2VOS)

2-port switch VoIP module access any phone in IP network via dialup or second dialup; you can easily realize free phone call via IP network.
2VOS Interface Module & Indicator

2VOS interface module:
2-port switch VoIP module (2VOS)
Page 31 of 49
Indicator description: 2-port switch VoIP module (2VOS) indicator: V1 V2 VoIP module indicator. LED on: during the phone call VoIP module indicator. LED on: during the phone call
2 V O S M o d u l e C o nne c t e d C a b l e
2VOS module connected cable is RJ45 external cable.
2VOS Module Interface Attributes

2-port switch VoIP module (2VOS) interface attributes:
Attributes Interface Interface number Supported protocol Description RJ45 jack 2 (RJ11) H.225 H.245 RTP RTCP G.711 G.723 G.729
Page 32 of 49
Ethernet Module (ETE) Series

1-port Ethernet Module (1ETE)
1-port Ethernet module realizes Ethernet connection.
1ETE Module & Indicator

1ETE module:
1-port Ethernet module (1ETE) 1-port switch VoIP module (1ETE) indicator: LINK Tx Rx On: link connected LED Blinking: data transmit LED Blinking: data receive
1 E T E M o d u l e C o nne c t e d C a b l e
RJ45 cable.
1ETE Module Interface Attributes

1ETE module interface attributes: 1-port Ethernet port (1ETE) attributes: Attributes Tie-in Tie-in number Supported protocol Description RJ45 1 802.3
Page 33 of 49
ISDN S/T Module (ST) Series

1-port ISDN S/T Module (1ST)
1port ISDN S/T module.
1ST Module & Indicator

1ST module:
1-port ISDN S/T module (1ST) indicator: ACT B1 B2 Active indicator, and it is on when it operates normally. B1 channel indicator. The indicator on when using Channel B1, B1=64K or B1+B2=128K B2 channel indicator. The indicator on when using Channel B2, B2=64K or B1+B2=128K
1ST Module Connected Cable

1ST cable is RJ45 straight connected Ethernet cable.
1 S T M o d u l e I n t e r fa c e A t t r i b ut es
1-port ISDN S/T module (1ST) interface attributes: Attributes Tie-in Number Supported protocol Description RJ45 1 PPP
Page 34 of 49
System Installation
Preparation
Read the manual Place router on a safe flat surface Do not put heavy material on router Use UPS Ensure proper grounding
Environment Requirements
Operati ng Environment
To ensure good working of router, maintain stable temperature and humidity. Always place router in the equipment room. The environment requirements are: Environment temperature: 040C Humidity: 1090%. Non-condensing Around the ventilation, the space should be no less than10cm. We suggest installing router on 19-inch standard rack.
Page 35 of 49
Temperature & Humidity

Maintain stable temperature and humidity in the equipment room.
Temperature Long-term 15C ~ 30C Short-term 0 ~ 40C Relevant humidity Long-term 40 ~ 65% Short-term 0% ~ 90%
Dust-free Environment
Dust is harmful for router operation. Dust causes static absorption. Dust damages the router especially when the temperature and humidity are lower.
Check Router & Accessories

Before installation, check the router and its accessories.
Router Configuration & Accessories

Item 1 2 3 4 5 6 Name MP1700Echassis Power supply cable Console port cable Ethernet cable Sync/async DTE cable Technical documents No 1 1 1 2 1 1 Description Router chassis 220V10A RJ45-DB9 crossing cable Straight Connected Ethernet cable V35 DTE cable (1) Installation manual configuration Manual (CD) Feet mat and installation bolt 1 set. Including foam antishocking material and external packing box, plastic bag etc.
7 8
Installation fittings Product packaging
1 1
Page 36 of 49
Chassis Installation
Tools & Equipment
Tools: Screwdriver Anti-static equipment Connected cables: Console port cable Ethernet cable (MP1700E Ethernet cable is configured according to the number of Ethernet modules) Modular interface cable Equipment: Ethernet 10 BASE-T HUB Configuring terminal (can be PC) Equipment relevant to optional module
Page 37 of 49
Machine Installation
The dimension of MP1700E is 340mm x 230mm x 44mmWDHand its installation process is: Step 1: Fix angle iron on front panel or back panel sides with bolts Step 2: Place router on empty slot Step 3: Fix angle iron to slots with bolts Step 4: Bracket and fixed angle iron will be fixed on the rack
Connecting Power Supply

MP1700E router adapts stable power supply switch system and have different power supply system. Input power supply (AC): 100240V50/60Hz Input power supply (DC): -40-57V only MP1700E supports Power consumption: 15W10% Always use the power supply jack or MIM PC power supply jack. Ensure reliable grounding.
Ground wire
Naught wire
Power supply jack
Live wire
Page 38 of 49
Connecting power supply: Put power supply switch to OFF, and then connect one side of power supply cable to the entry of back panel of router, and another side to power supply jackAC: 220V 50Hz/60Hz, DC: -48V, only MP1700E supports Put power supply switch to ON Check whether the power supply lamp of front panel is on, if not, please repeat step one and two.
Main Control Board Cable Connection

The section explains the method of connecting MP1700E router control board cable to network including connecting router console port.
Console Port Connection

Routers provide one EIA/TIA-232 async serial console port. The user configures router via the port by adopting RS-232 serial character terminal (normally a PC). Step 1: Find a character terminal a standard terminal with RS-232 serial or normal PC. Step 2: Ensure that router or terminal is out of power supply and connect RS-232 serial and console port with cables.
Grounding Wire Connection

MP1700E connecting to the ground guarantees of anti-thunder and malfunctioning of routers. For external network connection, such as E1 interface, PSTN are protected by the grounding cable. Connect this point and ground by a thick cable, with the resistance no bigger than 4. If the router is installed on 19-inch standard rack, the rack should be grounding.
Page 39 of 49
Module Installation
The routers adapt modular system structure and different kinds of interface configuration. Module installation steps: Step 1: Choose the module and interface. Step 2: Inset the module to slot. Insert the module circuit board into interface card slot. Step 3: Push in the module close to back panel. Step 4: Tighten the screw.
Rack/Desk
Installing routers to 19-inch standard rack: Front-end installation method: Step 1: Install ear bracket to both sides of front-end of MP1700E and fix with screw. Step 2: Place router on standard rack and connect bracket and metal frame with screw.
Panel Wire Connection

Panel wire connection includes Ethernet interface cable, WAN sync/async cable connection.
Page 40 of 49
Hardware Installation
Complete machine installation according to the details, and make sure the power supply switch is OFF Connect one side of AC power supply cable to router power supply, and another side to power supply jack Configure the router through console port after first power on Insert one side of configuration cable to console port, and another side to PC or terminal serial Insert one side of Ethernet cable to LAN interface, and another side to LAN Connect sync/async communication cable to router WAN Interface MP1700E sync/async interface can work in the mode of V.24/V.35, and these two modes are completed by V.24/V.35 button In V.24 mode, interface adopts standard RS232 cable connection In V.35 mode, interface adopts special V.35DTE cable
V.24/V.35 cable
Page 41 of 49
Module Interface Cable Connection

1SA Module Cable Connection
Before connecting sync/async serial, ensure the following two points: Equipment type: The equipment type connecting sync/async serial, which is sync/async or DTE/DCE. Access equipment requires signal standard, baud rate and sync clock. DTE/DCE: Sync/async serial accesses external Modem or TA (terminal adapter) as dialup interface. Sync serial has two modes - DTE and DCE. Router is used as DTE equipment. DTE and DCE equipment:
Equipment type DTE DCE Interface type Pin type Hole type Equipment PC Router MODEM Multiplexer CSU/DSU
Rate
and
transmission
distance:
Sync/async
serial
supports
different signal standards and baud rates in different working modes. Choose cables as per prevailing conditions.
Page 42 of 49
V.24 cable rate and transmission distance: Baud rate (bps) 2400 4800 9600 19200 38400 64000 115200 Maximum transmission distance (m) 60 60 30 30 20 20 10
V.35 cable rate and transmission distance: Baud rate (bps) 2400 4800 9600 19200 38400 56000 64000 2048000 Maximum transmission distance (m) 1250 625 312 156 78 60 50 30
Page 43 of 49
1SAE Module Cable Connection

Step 1: Insert one side of DB-25 to 1SAE module DB-25 interface and screw down fixed knob. Step 2: Connect another DB25 interface to V.24-V.35 (DB-25, M-34) cable and then connect the following equipment: If WAN is DDN line, connect (V.35 cable) to digital Modem V.35 interface. If WAN is dialup line, connect (V.24 cable) to analog Modem serial.
Step 3: After power on, check indicator status on 1SA module panel. DCD on: Link connected
1CE1/1E1 Module Cable Connection

Step 1: Connect one side of BNC plug to BNC interface of 1CE1/E1 module. Connect another side to equipment. Connect TX to RX equipment. Connect RX TX line. Step 2: After power on, check LOS status of 1CE1/E1 module. Indicator on means malfunction and signal loses sync. Then check the line.
1M336 Module Cable Connection

Insert RJ11 plug of 1M336 module cable to LINE jack.
Page 44 of 49
1M128 Module Interface Cable Connection

Step 1: Insert RJ11 plug of 1M128 module cable to LINE jack. Step 2: After power on, please check ACT status of 1M128 interface module. If the indicator is off, please check the line.
1U Module Interface Cable Connection

Step 1: Insert RJ11 plug of 1U module cable to external line; Step 2: After power on, please check ACT status of 1M128 interface module. If the indicator is off, please check the line.
1VOP/2VOP Module Cable Connection

Connect VOP module cable according to the following steps: Step 1: insert telephone line to RJ11/RJ45 interface of 1VOP/2VOP, and another side to telephone. Step 2: when having the phone call, pay attention to the indicator of 1VOP/2VOP card back panel: the indicator and Active LED should be on.
1VOS/2VOS Module Cable Connection

Connect VOS module cable according to the following steps: Step 1: Insert telephone line to RJ11/RJ45 interface of 1VOS/2VOS, and another side to small switch or external junction box. Step 2: When having the phone call, pay attention to the indicator of 1VOS/2VOS card back panel: the indicator and Active LED should be on.
Page 45 of 49
1ETE Module Cable Connection

Please connect 1ETE module cable according to following steps: Step 01: Insert one end of RJ45 cable into 1ETE module to the jack Step 02: Connect another end of RJ45 to relevant equipment line
1ST Module Cable Connection

Connect 1ST module cable according to following steps: Step 01: Insert one end of RJ45 cable into 1ST module Step 02: Connect another end of RJ45 to relevant equipment line
Page 46 of 49
Interface Cable Signal
Ethernet Interface Cable

MP1700E router Ethernet interface cable is 8-pin unshielded twisted-pair. Pin 1,2 is transmit and pin 3,6 is receive. They can be connected with HUB.
RJ45 1 2 3 6 4 5 7 8 Signal TX+ TXRX+ RX--------Direction > > < < --------RJ45 1 2 3 6 4 5 7 8 Length 2m
RJ45 cross cable (type-5 twisted-pair) pin configuration RJ45 1 2 3 6 4 5 7 8 Signal TX+ TXRX+ RX--------Direction > > < < --------RJ45 3 6 1 2 7 8 4 5 Length 2m
Page 47 of 49
Console Port Cable

MP1700E router console port cable is connected with . One side RJ45 plug and the other is DB9 female.
5 4 3 2 1 9 8 7 6
RJ45 jack
standard DB9 interface
CONSOLE RJ45 1 2 3 4 5 6 7 8
PORT CABLE PIN CONFIGURATION
Signal CTS DSR RXD GND --TXD DTR RTS -----
Direction > > > ----< < < -----
DB9 8 6 2 5 --3 4 7 1 9
Length 3m
Page 48 of 49
RM2-1E1 & RM2-1CE1 Uses RJ45-RJ45 Cross-cable

PIN RJ45 1 2 3 6 4 5 7 8
CONFIGURATION FOR
RJ-45 CROSS-CABLE Direction < < ----> > ----RJ45 4 5 7 8 1 2 3 6
Signal RX+ RX----TX+ TX-----
Page 49 of 49

MP1700 Install Manual en

Uploaded by

Copyright:

Available Formats

MP1700 Install Manual en

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

MP1700 Install Manual en

Uploaded by

Copyright:

Available Formats

MP1700E Series Installation Manual V1.

MP1700E Series Routers

Installation Manual V1.4

Maipu Communication Technology Co., Ltd

Maipu Confidential & Proprietary Information

MP1700E Series Installation Manual V1.4

Maipu Communication Technology Co., Ltd

Maipu Confidential & Proprietary Information

MP1700E Series Installation Manual V1.4

Maipu Feedback Form

Your suggestions to improve the document

Maipu Confidential & Proprietary Information

MP1700E Series Installation Manual V1.4

Installation Manual ....................................................................................7

Channelized E1 Module (CE1) Series ...................................................................... 21

Non-channelized E1 Series .................................................................................... 22

Maipu Confidential & Proprietary Information

MP1700E Series Installation Manual V1.4

1-port Non-channelized E1 (1E1) ...........................................................................................22

Frequency-band MODEM M336 Series .................................................................... 23

Base-band MODEM (M128) Series.......................................................................... 25

ISDN (U) Series.................................................................................................... 26

IP Module (VOP/VOS) Series.................................................................................. 28

Ethernet Module (ETE) Series ................................................................................ 33

ISDN S/T Module (ST) Series................................................................................. 34

System Installation ................................................................................. 35

Chassis Installation ............................................................................................... 37

Maipu Confidential & Proprietary Information

MP1700E Series Installation Manual V1.4

Module Interface Cable Connection ........................................................................ 42

Interface Cable Signal............................................................................. 47

Maipu Confidential & Proprietary Information

MP1700E Series Installation Manual V1.4

How to Get in Touch

Maipu Confidential & Proprietary Information

MP1700E Series Installation Manual V1.4

Maipu Confidential & Proprietary Information

MP1700E Series Installation Manual V1.4

Maipu Confidential & Proprietary Information

MP1700E Series Installation Manual V1.4

Maipu Confidential & Proprietary Information

MP1700E Series Installation Manual V1.4

MP1700E Router Appearance

MP1700E Front Panel

MP1700E front panel

Maipu Confidential & Proprietary Information

MP1700E Series Installation Manual V1.4

Maipu Confidential & Proprietary Information

MP1700E Series Installation Manual V1.4

MP1700E Back Panel

MP1700E back panel interface configuration

MP1700E back panel interface:

High-speed fixed sync/async interface

Maipu Confidential & Proprietary Information

MP1700E Series Installation Manual V1.4

Maipu Confidential & Proprietary Information

MP1700E Series Installation Manual V1.4

Maipu Confidential & Proprietary Information

MP1700E Series Installation Manual V1.4