Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 305 views

    Lubrication

    Uploaded by

    1680808054731
    The document provides lubrication recommendations for Deckel machines, including a table listing the recommended lubricants for ways, gears and hydraulics, spindles, and ball bearings. It notes that the listed products have been strongly advised and tested, and not to use alternative lubricants. The following section describes the replacement lubricants the author uses for their Deckel FP2 machine, obtained from Kroon Oil, including oils for gears/hydraulics, spindles, ways, and special greases.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd

    Lubrication

    Uploaded by

    1680808054731
    305 views4 pages
    The document provides lubrication recommendations for Deckel machines, including a table listing the recommended lubricants for ways, gears and hydraulics, spindles, and ball bearings. It notes that the listed products have been strongly advised and tested, and not to use alternative lubricants. The following section describes the replacement lubricants the author uses for their Deckel FP2 machine, obtained from Kroon Oil, including oils for gears/hydraulics, spindles, ways, and special greases.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides lubrication recommendations for Deckel machines, including a table listing the recommended lubricants for ways, gears and hydraulics, spindles, and ball bearings. It notes that the listed products have been strongly advised and tested, and not to use alternative lubricants. The following section describes the replacement lubricants the author uses for their Deckel FP2 machine, obtained from Kroon Oil, including oils for gears/hydraulics, spindles, ways, and special greases.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    305 views4 pages

    Lubrication

    Uploaded by

    1680808054731
    The document provides lubrication recommendations for Deckel machines, including a table listing the recommended lubricants for ways, gears and hydraulics, spindles, and ball bearings. It notes that the listed products have been strongly advised and tested, and not to use alternative lubricants. The following section describes the replacement lubricants the author uses for their Deckel FP2 machine, obtained from Kroon Oil, including oils for gears/hydraulics, spindles, ways, and special greases.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    You are on page 1of 4

    LUBRICATION

    Lubrication
    In the next paragraph is a table with the lubricants that are recommended / prescribed by Deckel It's a translation from a scan that was not very clear to read. So beware of errors.The section that follows describes the replacement lubrication that I use.

    " Lubrication table - General lubrication info about Deckel machines "

    " The products in these columns are strongly adviced. It is possible to use other lubricants when the specifications match the specifications in this table "

    " The products in this column are selected after many years of testing. Please do not use alternative lubricants " Way lubricant ISO VG 220 Visk. 220 mm2/S 40C EXIDIA 14 DEGANIT B 220 ENERGOL HP-C 220 MAGNA CF 220 GLISSE LF 220 FEBIS K 220 RENEP 5 WAYLUBRIC VG 220 LAMORA SUPER POLADO 220 VACTRA NO 4 TONNA OEL T 220 WAY LUBRICANT 90 WAY LUBRICANT 220

    Gear and Hydraulic oil ISO VG 46 Visk. 46 mm2/S 40C AGIP ARAL BP CASTROL ELF ESSO FUCHS OGO 45 VITAM DE 45 ENERGOL HLP 45 HYSPIN AWS 46 ACANTIS 46 NUTO H 46 RENOLIN MR 15

    Spindle oil ISO VG 10 Visk. 10 mm2./S 40C ---SULNIT CMT ENERGOL HLP 10 HYSPIN VG 10 SPINELF 10 SPINESSO 10 RENOLIN MR 3 SPEEDLUBRIC VG 10 CRUCOLAN 10 VELOCITE NR 6 TELLUS OEL C10 SUNVIS 826 SPINDURA OIL 10 RANDO OIL 10

    Ballbearing lube Standard Quality GR MU 2 ARALUB AR 2 ENERGREASE LS 2 SPHEEROL AP 2 GRAISSE ELF TU 2 GRAISSE ELF EP 2 BEACON 2 RENOLIT MP COSMOLUSE EP 2 CENTOPLEX 2 MOBIPLEX 46 MOBILUX 2 ALVANIA 2 SUN M.O.2 GREASE MULTIFAK MULTIFAK 20

    HOUGHTON HYDROLUBRIC VG 46 KLUBER MOBIL OIL SHELL SUNOCO TEXACO LAMORA HLP 46 DTE MEDIUM TELLUS OEL 45 SUNVIS 821 RANDO OIL 46

    " The products in this section are selected after many years of testing. Please do not use alternative lubricants " Lubricant Special oil (Grindinghead spindle ) Chainoil DOW CORNING MOLYKOTE MKL Manufacturer FUCHS Type RENOLIN 10 Iso classification

    Special grease (spindle bearings ) Special oil (Maintanance)

    KLUBER LUBRICATION KLUBER LUBRICATION

    Isoflex Super TEL

    Kluber TES 527 EP

    ISO VG 10 Visk. 10 mm2/s 40C

    Replacement lubrication

    These are the lubricants in use for the Deckel FP2 . Most of them obtained from Kroon Oil Lubricant Gear and Hydraulic oil Iso classification ISO VG 46 Visk. 46 mm2/S 40C ISO VG 10 Visk. 10 mm2./S 40C Standard quality Manufacturer Kroon Type Perlus 32/46

    Spindle oil

    Kroon

    Perlus H 15

    Ball bearing lube

    Kroon

    General lube

    Way oil

    ISO VG 220 Visk. 220 mm2/S 40C ---

    Kroon

    Carsinus U 68/220

    Special oil (Grindinghead spindle ) Chainoil

    ---

    ---

    ---

    DOW CORNING

    MOLYKOTE MKL

    Special grease (spindle bearings ) Special oil (Maintanance)

    ---

    KLUBER LUBRICATION KLUBER LUBRICATION

    Isoflex Super TEL

    ISO VG 10 Visk. 10 mm2/s 40C

    Kluber TES 527 EP

    You might also like