Professional Documents
Culture Documents
Car CM
Car CM
Release 6.0(1)
Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS. THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY. The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCBs public domain version of the UNIX operating system. All rights reserved. Copyright 1981, Regents of the University of California. NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED AS IS WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE. IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. CCVP, the Cisco Logo, and the Cisco Square Bridge logo are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn is a service mark of Cisco Systems, Inc.; and Access Registrar, Aironet, BPX, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Enterprise/Solver, EtherChannel, EtherFast, EtherSwitch, Fast Step, Follow Me Browsing, FormShare, GigaDrive, GigaStack, HomeLink, Internet Quotient, IOS, iPhone, IP/TV, iQ Expertise, the iQ logo, iQ Net Readiness Scorecard, iQuick Study, LightStream, Linksys, MeetingPlace, MGX, Networking Academy, Network Registrar, Packet, PIX, ProConnect, RateMUX, ScriptShare, SlideCast, SMARTnet, StackWise, The Fastest Way to Increase Your Internet Quotient, and TransPath are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries. All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0612R) Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide Copyright 2007 Cisco Systems, Inc. All rights reserved.
CONTENTS
Preface
xi iii-xi iii-xii iii-xii iii-xiii
Purpose Audience
Organization Conventions
Related Documentation
iii-xiii
Obtaining Documentation, Obtaining Support, and Security Guidelines Cisco Product Security Overview
1
xiv
iii-xiv
CHAPTER
1-1
Understanding CDR Analysis and Reporting CAR Administrators, Managers, and Users CAR System Settings
1-6
1-2 1-5
CAR Reports 1-6 CAR Reports General Information 1-6 User Reports 1-7 System Reports 1-8 Device Reports 1-10 Automatically Generated Reports Schedule CDR Search Web Browsers Related Topics
2
1-12
1-11
1-13
1-15
CHAPTER
2-1
Configuring CDR Service Parameters Configuring CDR Enterprise Parameters Logging On to CAR
2-5
2-4
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
iii
Contents
2-6 2-7
CHAPTER
3-1
Configuring CAR System Parameters 3-1 Configuring Mail Server Parameters 3-1 Configuring the Dial Plan 3-2 Restoring the Default Values for the CAR Dial Plan Gateway Configuration 3-5 Configuring System Preferences 3-6 Configuring CAR System Scheduler 3-6 Configuring the CDR Load Schedule 3-7 Scheduling Daily Reports 3-9 Scheduling Weekly Reports 3-10 Scheduling Monthly Reports 3-11 Configuring CAR System Database 3-12 Manually Purging or Reloading the CAR Database Configuring Automatic Database Purge 3-14 Generating the Event Log Related Topics
4
3-16 3-15
3-3
3-13
CHAPTER
4-1
Configuring the Rating Engine 4-1 Setting the Base Rate and Duration 4-2 Factoring Time of Day into Call Cost 4-3 Factoring Voice Quality into Call Cost 4-4 Defining the Quality of Service (QoS) Values
4-5
Configuring Automatic Report Generation/Alert 4-6 Enabling or Customizing Reports for Automatic Generation Enabling or Disabling Alerts by Mail 4-8 Configuring Notification Limits Related Topics
5
4-9 4-8
4-7
CHAPTER
5-1
Configuring Bills Reports 5-1 Configuring Individual Bills Reports 5-2 Configuring Department Bills Reports 5-3
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
iv
OL-12483-01
Contents
Configuring Top N Reports 5-4 Configuring Top N by Charge Reports 5-4 Configuring Top N by Duration Reports 5-7 Configuring Top N by Number of Calls Reports
5-9
Configuring Cisco Unified Communications Manager Assistant Usage Reports 5-11 Configuring Manager Call Usage for Cisco Unified Communications Manager Assistant Reports 5-11 Configuring Assistant Call Usage for Cisco Unified Communications Manager Assistant Reports 5-12 Configuring Cisco IP Phone Services Reports Mailing a Report Searching for Users Related Topics
6
5-16 5-14 5-15 5-13
CHAPTER
6-1
Configuring QoS Reports 6-1 QoS Detail Report Configuration 6-2 QoS Summary Report Configuration 6-4 QoS by Gateway Report Configuration 6-6 QoS by Call Types Report Configuration 6-8 Configuring Traffic Reports 6-10 Configuring Traffic Summary Reports 6-11 Configuring Traffic Summary by Extensions Reports Configuring FAC/CMC Reports 6-16 Configuring Client Matter Code Reports 6-16 Configuring Authorization Code Name Reports 6-17 Configuring Authorization Level Reports 6-18 Configuring Malicious Call Details Reports Configuring System Overview Reports Configuring CDR Error Reports Related Topics
7
6-23 6-22 6-21 6-19 6-20
6-14
CHAPTER
7-1
Configuring Gateway Reports 7-1 Gateway Detail Report Configuration 7-1 Gateway Summary Report Configuration 7-4 Gateway Utilization Report Configuration 7-6
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
Contents
Configuring Route Plan Reports 7-8 Route and Line Group Utilization Reports Configuration 7-8 Route/Hunt List Utilization Report Configuration 7-10 Route Pattern/Hunt Pilot Utilization Report Configuration 7-12 Configuring Conference Bridge Reports 7-13 Configuring Conference Call Details 7-14 Configuring Conference Bridge Utilization Reports Configuring Voice Messaging Utilization Reports Related Topics
8
7-18 7-16
7-15
CHAPTER
8-1 8-1
Configuring CDR Search by User Extension Configuring CDR Search by Gateway Viewing Call Termination Details
8-5 8-3
Configuring CDR Search by Cause for Call Termination Configuring CDR Search By Call Precedence Levels Configuring CDR Search for Malicious Calls Related Topics
9
8-8 8-7 8-6
8-4
CHAPTER
9-1
9-2
CHAPTER
10
10-1
Cisco Unified Communications Manager CDR Overview CDR Management 10-3 CDR Agent 10-3 CDR Repository Manager 10-4 CDR onDemand Service 10-4 Types of Call Information Records 10-5 Global Call Identifier 10-5 Number Translations 10-6 Partitions and Numbers 10-6 Timestamps 10-7 Call Termination Cause Codes 10-8 IP Addresses 10-8
10-3
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
vi
OL-12483-01
Contents
Call Types 10-8 Successful On Net Calls 10-9 Abandoned Calls 10-9 Calls with Busy or Bad Destinations 10-10 Short Calls 10-11 Forwarded or Redirected Calls 10-11 Pickup Calls 10-12 Pickup 10-12 Auto Pickup 10-12 Transferred Calls 10-13 Transfer Without Consultation 10-14 Transfer with Consultation 10-15 Conference Calls 10-15 Meet-Me Conferences 10-17 Ad Hoc Conference Linking 10-18 Precedence Calls (MLPP) 10-20 Malicious Calls 10-21 Conference Drop Any Party 10-21 Immediate Divert (to Voicemail) 10-22 Video Calls 10-22 Call Monitoring and Call Recording 10-23 AAC and iLBC Calls 10-25 Mobility 10-27 Intercom 10-29 Original Calling Party on Transfer 10-30 Interpreting Cisco Personal Assistant Data in the CDRs 10-30 Personal Assistant Direct Call 10-31 Personal Assistant Interceptor Going to Media Port and Transferring the Call 10-31 Personal Assistant Interceptor Going Directly to Destination 10-32 Personal Assistant Interceptor Going to Multiple Destinations 10-33 Personal Assistant Direct Multiple Destinations: 2110 and 2120 (Call Accepted at First Destination) 10-33 Personal Assistant Direct Multiple Destinations: 2110 and 2120 (Call Accepted at Second Destination) 10-33 Personal Assistant Direct Multiple Destinations: 2110 and 2120 (Call Accepted at Third Destination) 10-34 Personal Assistant Intercept Multiple Destinations: 2110 and 2120 (Call Accepted at First Destination) 10-34 Personal Assistant Intercept Multiple Destinations: 2110 and 2120 (Call Accepted at Second Destination) 10-35
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
vii
Contents
Personal Assistant Intercept Multiple Destinations: 2110 and 2120 (Call Accepted at Third Destination) 10-35 Personal Assistant Conferencing 10-36 Call Scenarios 10-36 Normal Calls (IP Phone to IP Phone) 10-38 Abandoned Calls 10-38 Calls With Busy or Bad Destinations (Unsuccessful Calls) 10-40 Forwarded Calls 10-41 Call Pickup 10-42 Pickup 10-43 Auto Pickup 10-43 Call Pickup 10-44 Transferred Calls 10-45 Conference Calls 10-48 Secure Meet-Me Conference 10-50 Ad Hoc Conference Linking 10-50 Conference Linking using Join 10-51 Conference Linking Using Transfer or Direct Transfer 10-52 Removing a Party From a Linked Conference 10-54 Removing a Party (Controller) From a Linked Conference 10-56 Removing the Linked Conference 10-58 Call Park 10-61 Call Park Pickup 10-61 Call Park Reversion 10-62 Precedence Calls (MLPP) 10-63 Malicious Calls 10-64 Immediate Divert (to Voicemail) 10-64 Barge 10-66 cBarge 10-68 Video Calls 10-69 Forced Authorization Code (FAC) 10-70 Client Matter Code (CMC) 10-70 Call Secured Status 10-71 DTMF Method 10-72 RSVP 10-73 Redirection (3xx) Calls 10-74 Replaces Calls 10-75 Refer Calls 10-76 Monitor Calls 10-76 Recording Calls 10-77
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
viii
OL-12483-01
Contents
AAC and iLBC Calls 10-79 Mobility 10-80 Intercom Calls 10-83 CDR Field Descriptions K-Factor Data in CMRs Codec Types
10-108 10-110 10-84 10-102
Call Termination Cause Codes Redirect Reason Codes OnBehalfof Codes Related Topics
10-115 10-116 10-113 10-114
Related Documentation
11
CHAPTER
11-1 11-2
Top N By Charge or Duration Report Results Top N By Number of Calls Report Results
Call Usage for AssistantDetail Report Results Call Usage for ManagerDetail Report Results Cisco IP Phone Services Report Results QoS Detail Report Results
11-16 11-18 11-19 11-20 11-22 11-16
Call Usage for AssistantSummary Report Results Call Usage for ManagerSummary Report Results
11-13 11-14
QoS by Gateways Report Results QoS by Call Types Report Results Traffic Summary Report Results
Authorization Code Name Call Details Report Results Authorization Level Call Details Report Results Client Matter Code Details Report Results Malicious Call Details Report Results System Overview Report Results CDR Error Report Results
11-32 11-33 11-27 11-29 11-26 11-27
11-25
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
ix
Contents
11-35 11-38
Gateway and Route Utilization Report Results Conference Call Detail Report Results
11-42
Conference Bridge Utilization Report Results Voice Messaging Utilization Report Results Understanding the CDR Search Results 11-48 Understanding the Results for CDR Search Media Information 11-49 CDR and CMR Dump Tables 11-49
INDEX
11-44 11-46
11-48
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
OL-12483-01
Preface
This preface describes the purpose, audience, organization, and conventions of this guide, and provides information on how to obtain related documentation.
Note
This document may not represent the latest available Cisco product information. You can obtain the most current documentation by accessing the Cisco product documentation page at this URL: http://www.cisco.com/univercd/home/home.htm The preface covers these topics:
Purpose, page xi Audience, page xii Organization, page xii Related Documentation, page xiii Conventions, page xiii Obtaining Documentation, Obtaining Support, and Security Guidelines, page xiv Cisco Product Security Overview, page xiv
Purpose
The Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide describes how to configure and use Cisco Unified Communications Manager CDR Analysis and Reporting (CAR), a tool that is used to create user, system, device, and billing reports. Use this guide in conjunction with the following documents:
Cisco Unified Serviceability Administration GuideThis document provides descriptions and procedures for configuring alarms, traces, SNMP, and so on, through Cisco Unified Serviceability. Cisco Unified Real-Time Monitoring Tool Administration GuideThis document describes how to use RTMT, a tool that allows you to monitor many aspects of the system (critical services, alerts, performance counters, and so on). Cisco Unity Connection Serviceability Administration GuideThis document provides descriptions and procedures for using alarms, traces, reports, and so on, through Cisco Unity Connection Serviceability.
Cisco Unified Communicatons Manager CDR Analysis and Reporting Administration Guide OL-12483-01
xi
Preface Audience
Audience
The Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide provides information for administrators who are responsible for managing and supporting CAR, and call detail records (CDRs). Network engineers, system administrators, or telecom engineers use this guide to learn about, and administer, CAR features. CAR administrators, managers and end users use CAR to generate certain reports.
Organization
The following table shows how this guide is organized: Chapter Description
Chapter 1, CDR Analysis Provides an overview of CDR Analysis and Reporting, a tool that is used and Reporting Overview to create user, system, device, and billing reports. Chapter 2, Getting Started with CDR Analysis and Reporting Chapter 3, CAR System Configuration Chapter 4, CAR Report Configuration Chapter 5, CAR User Reports Configuration Chapter 6, CAR System Reports Configuration Chapter 7, CAR Device Reports Configuration Chapter 8, CDR Search Configuration Chapter 9, Export CDR/CMR Records Configuration Provides the procedures for configuring the CDR Analysis and Reporting (CAR), CDR service and enterprise parameters, and logging in and out of CAR. Provides procedures for configuring the CAR system parameters, system scheduler, and system database. Provides procedures for configuring the rating engine, quality of service, and automatic generation of CAR reports. Provides procedures for configuring individual and department bills and Cisco Unified IP Phone services for use with CAR user reports. Provides procedures for configuring quality of service reports and parameters, traffic summary, system overview, and CDR errors for use with CAR system reports. Provides procedures for configuring CAR device reports for gateways, conference bridges, and voice-messaging utilization. Provides procedures for configuring CAR CDR Search for user extension and gateways. Provides procedures for configuring the export of CDR/CMR records.
Chapter 10, Provides CDR definitions and examples. Understanding Cisco Call Detail Records Chapter 11, CAR Report Results Provides information describing the results of all CAR reports.
Cisco Unified Communicatons Manager CDR Analysis and Reporting Administration Guide
xii
OL-12483-01
Related Documentation
See the Cisco Unified Communications Manager Documentation Guide for additional Cisco Unified Communications Manager documentation. The following URL shows an example of the path to the documentation guide: http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/<release #>/doc_gd/index.htm
Conventions
This document uses the following conventions: Convention boldface font italic font [ ] {x|y|z} [x|y|z] string
screen
Description Commands and keywords are in boldface. Arguments for which you supply values are in italics. Elements in square brackets are optional. Alternative keywords are grouped in braces and separated by vertical bars. Optional alternative keywords are grouped in brackets and separated by vertical bars. A nonquoted set of characters. Do not use quotation marks around the string or the string will include the quotation marks.
font font
Terminal sessions and information the system displays are in screen font. Information you must enter is in boldface screen font. Arguments for which you supply values are in italic screen font. This pointer highlights an important line of text in an example. The symbol ^ represents the key labeled Controlfor example, the key combination ^D in a screen display means hold down the Control key while you press the D key. Nonprinting characters, such as passwords, are in angle brackets.
boldface screen
< >
Note
Means reader take note. Notes contain helpful suggestions or references to material not covered in the publication. Timesavers use the following conventions:
Timesaver
Means the described action saves time. You can save time by performing the action described in the paragraph. Tips use the following conventions:
Cisco Unified Communicatons Manager CDR Analysis and Reporting Administration Guide OL-12483-01
xiii
Tip
Means the information contains useful tips. Cautions use the following conventions:
Caution
Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data. Warnings use the following conventions:
Warning
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, you must be aware of the hazards involved with electrical circuitry and familiar with standard practices for preventing accidents.
Cisco Unified Communicatons Manager CDR Analysis and Reporting Administration Guide
xiv
OL-12483-01
CH A P T E R
Note
CAR does not handle iDivert calls (feature that diverts calls to a voice messaging system) and treats them as normal calls. The part of the call after the iDivert feature gets activated may not get charged to the correct party. This chapter contains the following topics:
Understanding CDR Data, page 1-1 Understanding CDR Analysis and Reporting, page 1-2 CAR Administrators, Managers, and Users, page 1-5 CAR System Settings, page 1-6 CAR Reports, page 1-6 CDR Search, page 1-12 Internationalization for CDR Analysis and Reporting, page 1-13 Web Browsers, page 1-14 CDR Analysis and Reporting Configuration Checklist, page 1-15 Related Topics, page 1-16
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
1-1
Cisco CDR Agent service sends any accumulated CDR files when the connection to the CDR Repository node resumes. The CDR Repository Manager service maintains the CDR and CMR files, allocates the amount of disk space for use by CMRs and CDRs, sends the files to up to three configured destinations, and tracks the delivery result for each destination. CDR Analysis and Reporting (CAR) accesses the CDR/CMR files in the directory structure that the CDR Repository Manager service creates. The high and low water mark settings that you configure specify percentages of the total disk space that are allocated for the CDR repository. Although the preserved folder under the CDR repository folder contributes to the high and low water mark percentages, Log Partition Monitoring never deletes the folder if the high water mark gets reached. If the high water mark gets reached, the CDR Repository Manager deletes processed CDR files until the low water mark is reached or all processed files are deleted, whichever comes first. If all processed CDR files are deleted but the low water mark has not been reached, the deletion stops. The CDRHighWaterMarkExceeded alarm gets generated until the system reaches the maximum disk allocation. If the maximum disk allocation gets reached, the system deletes undelivered files, and files within the preservation duration, starting with the oldest files, until disk utilization falls below the high water mark. If you receive the CDRMaximumDiskSpaceExceeded alarm repeatedly for this scenario, either increase the disk allocation or lower the number of preservation days. For more information on CDR services and alarms, see the Cisco Unified Serviceability Administration Guide.
Note
You cannot upgrade from a Microsoft Windows version of Cisco Unified Communications Manager system to a Cisco Unified Communications Manager Business Edition system (that runs Linux 5.0 and later). However, you can integrate a Windows version of Cisco Unified Communications Manager with a standalone Cisco Unity Connection system. In this particular situation, the CAR installation program will detect this option. CAR does not get supported on a Cisco Unity Connection system and will not be installed. When CAR is not installed, Cisco Unified Communications Manager Administration cannot activate, deactivate, start, stop, or restart CAR Web Service and CAR Scheduler from Cisco Unified Serviceability.
Note
If you upgrade from Cisco Unified Communications Manager 4.x, Cisco Unified Communications Manager saves the CDRs in the CAR database to comma separated value (CSV) files. The Data Migration Tool uses these CSV files to upgrade the CAR database. The system stores the CSV files in /common/download/windows/car. The system stores the pregenerated reports in /common/download/windows/pregenerated. Because Cisco Unified Communications Manager 5.x does not use a CDR database to store CDR records as in previous releases, the CDR data does not migrate to the Cisco Unified Communications Manager 5.x system.
Automatically configure the required tasks to take place. Manually perform the tasks by using the web interface.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
1-2
OL-12483-01
Chapter 1
CDR Analysis and Reporting Overview Understanding CDR Analysis and Reporting
You access CAR from the Tools menu of Cisco Unified Serviceability after you activate the appropriate services as described in the Activating CAR section on page 2-1. All CAR reports use CDR data. CAR processes the CDRs from flat files that the CDR Repository service has placed in the CDR repository folder structure. CAR processes CDRs at the scheduled time and frequency. By default, CDR data loads from midnight to 5 a.m. on a daily basis; however, you can set the loading time, interval, and duration as needed. An option allows continuous loading 24/7 of the CDR data. An option also allows you to Load CDR Only data (the corresponding CMR records do not get loaded). CAR retrieves information that is required for various reports from the CDRs and CMRs as well as from the Cisco Unified Communications Manager database.
Scheduling Reports
You can schedule CAR reports to generate automatically at a regular time. Each report that can be scheduled has its own report generation interval. You can make the report generation interval daily, weekly, or monthly. Scheduling the Daily reports would schedule all the reports that have report generation intervals as Daily. Similarly, scheduling Weekly or Monthly reports would schedule the reports that have report generation intervals as weekly or monthly. You can also specify the time to keep a report before it gets automatically deleted. By default, CAR uses the following report generation and deletion schedule:
Daily reports run at 1 a.m. every day. These reports get purged after two days. Weekly reports run at 4 a.m. every Sunday. These reports get purged after four weeks. Monthly bill reports run at 3 a.m. on the first day of every month. These reports get purged after two months. Other monthly reports run at 2 a.m. on the first day of every month. These reports get purged after two months.
Note
For a list of reports and the default generation schedule, see the CAR Reports General Information section on page 1-6. For system monitoring, automatically generate various reports, such as QoS reports, and review them at regular intervals, perhaps every day if you have a very large system, or every week or every two weeks for smaller systems. QoS reports help you determine the quality of calls that are running on your network and judge whether you need additional hardware to improve performance. You can use utilization reports for gateways, voice messaging, conference bridge, route groups, route lists, and route patterns to provide a picture of the usage to help with system handling. You can also customize the report parameters and enable a mailing option, so reports get e-mailed when they are created. The Customize Parameters option allows you to customize the report parameters for particular reports in the Customize Parameters window. For each individual report, you can customize the parameters for that report.
Setting Up Alerts
CAR provides e-mail alerts for various events, including the following events:
Charge Limit Notification indicates when the daily charge limit for a user exceeds the specified maximum. You can set the maximum in the Report Config > Notification Limits window. QoS Notification indicates when the percentage of good calls drops below a specified range or the percentage of poor calls exceeds a specified limit. You can set the range in the Report Config > Notification Limits window.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
1-3
Enabling the system for e-mail alerts comprises a two-step process. First, you must specify the mail server configuration information (System > System Parameters > Mail Parameters). CAR uses the configuration information to successfully connect to the e-mail server. Next, you must enable the e-mail alerts on the Automatic Report Generation/Alert window (Report Config > Automatic Generation/Alert). By default, CAR enables e-mail alerts for some, but not all, reports.
Note
The system does not provide e-mail alerts to application users because no mail ID exists for an application user.
Purging CAR data
CAR provides automatic and manual purging of the CAR database. By default, the system enables automatic purging. Before and after loading CDRs/CMRs, CAR checks the size of the CAR database and invokes automatic purging, if necessary, to control the CAR database size. With automatic purging, CAR continuously monitors the number of days that the CDRs are kept in the CAR database; when the CDR age exceeds the maximum number of days as configured in the maximum age setting in the Configure Automatic Database Purge window, CAR deletes all CDRs that are older than the number of days that you configured. In the Configure Automatic Database Purge window, you specify the percentages of the CAR database that you want to allot for CAR data; the system maintains the CAR database size between the high water mark and low water mark that you specify. When the CAR database size exceeds the low water mark, CAR sends an e-mail to all CAR administrators. When the database size exceeds the high water mark or the number of CDRs in the CAR database exceeds two million records, CAR deletes CDRs that are older than the number of days that you specified for the CDR minimum age in the Configure Automatic Database Purge window; then, an e-mail gets sent to all CAR administrators. If the high water mark gets breached again or if the number of CDRs exceeds two million even after automatic purging completes, CAR triggers auto purging, does not load the CDRs/CMRs, and sends another e-mail.
Tip
To disable automatic purging to the minimum age when the high water mark gets breached or when the CDRs exceed two million records, configure the CDR minimum age to equal the CDR maximum age in the Configure Automatic Database Purge window. Configure manual database purge when you want to delete records that are older than a particular date or that fall in a specific date range, but you do not want to change the automatic purging schedule. You can also reload the CAR database with CDR records by clicking the Reload button in the Manual Purge window. You may want to reload the database to reclassify calls after dial-plan updates, user-device association changes, call rate changes, and so on. After the system loads the new records, the system loads the records according to the schedule in the configured CDR load schedule. By default, CDR data loads every day from midnight to 5 a.m.
Tip
Schedule database purges or manual purging during off-peak hours to minimize any degradation of Cisco Unified Communications Manager performance.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
1-4
OL-12483-01
Chapter 1
CDR Analysis and Reporting Overview CAR Administrators, Managers, and Users
Event log purging, which is a daily scheduled job that monitors the tbl_event_log table, automatically deletes the tbl_event_ log records to keep the latest 3 days of daily jobs, the latest 3 weeks of weekly jobs, and the latest 3 months of monthly jobs; that is, if more than 1500 rows exist in the tbl_event_log table. CAR automatically enables event log purging and does not send an e-mail when event log purging occurs.
Call Costs
You can use CAR to set a base monetary rate for the cost of calls on the basis of a time increment. Then, you can further qualify the cost by applying the time-of-day and voice-quality factors. Service providers who must account for service to subscribers use this feature. Some organizations also use this information to establish billing costs for users and departments in the organization for accounting or budgeting purposes. Reports that use these rating parameters include Individual Bill, Department Bill, Top N by Charge, Top N by Number, and Top N by Duration.
Note
If you do not change the default value for charge base/block, the cost will always remain zero because the default base charge per block equals zero.
Note
If you do not want to increase call cost by voice quality, you can use the default values. The default multiplication factor specifies 1.00, so no increase in call cost for voice quality occurs. For more information on setting call rates, see the Configuring the Rating Engine section on page 4-1.
Tracking Activity
CAR provides logs that can track the status of the various activities. The event log tracks events that the CAR Scheduler triggers, such as automatically generated reports, loading of CDRs, notifications, report deletions, and database purging.
Administrators use all the features of CDR Analysis and Reporting; for example, they can generate system reports to help with load balancing, system performance, and troubleshooting. Managers can generate reports for users, departments, and QoS to help with call monitoring for budgeting or security purposes and for determining the voice quality of the calls. Individual users can generate a billing report for calls.
Any user can act as a CAR administrator. Users who have been identified as CAR administrators have full control over the CAR system. The administrator can modify all the parameters that relate to the system and the reports. CAR requires a minimum of one administrator. You set up administrators, managers, and users in Cisco Unified Communications Manager Administration. For more information, see the Configuring CAR Administrators, Managers, and Users section on page 2-4.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
1-5
Mail server criteriaCAR uses this information to successfully connect to the e-mail server to send alerts and reports by e-mail. If you do not want to send alerts or reports by e-mail, you do not need to specify this information. Dial planThe default dial plan in CAR specifies the North American numbering plan (NANP). Ensure the dial plan is properly configured, so call classifications are correct in the reports. If you have modified the default NANP that Cisco Unified Communications Manager Administration provides, or if you are outside the NANP, be sure to configure the dial plan according to your Cisco Unified Communications Manager dial plan. GatewaysTo utilize the gateway reports, you need to configure gateways in CAR. You should do this after installation of any existing gateways in your Cisco IP telephony system and when you add gateways to the system. If the system deletes any gateways, CAR gets the latest list of gateways, and any configuration that is specified in CAR for the deleted gateways gets deleted. CAR uses the area code information to determine whether calls are local or long distance. You must provide the Number of Ports information for each gateway to enable CAR to generate the Utilization reports. System preferencesYou can set CAR system preferences for the Company Name parameter.
CAR Reports
From CAR, you can generate reports on demand, or if you are an administrator, you can schedule reports for automatic generation. You can view reports in comma separated values (CSV) format or portable document format (PDF). If you choose PDF, you must have Adobe Acrobat Reader installed on your PC. The section describes the reports that are available with CDR Analysis and Reporting and contains the following topics:
CAR Reports General Information, page 1-6 User Reports, page 1-7 System Reports, page 1-8 Device Reports, page 1-10 Automatically Generated Reports Schedule, page 1-11
When no records match the time range specified (hour of day, day of week, or day of month) in the search criteria, the report displays a value of 0.00 for all of the days/hours. If all records that are returned have a value of 0.00, CAR does not display the charts. CAR displays the charts if any record contains a non-zero value.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
1-6
OL-12483-01
Chapter 1
When records get generated (for at least one day in the chosen date range) and the number of days chosen is more than the number of days that the report can show (more than seven for weekly and more than 31 for monthly), the chart displays all the days (with 0 value for the days that do not generate records). A table displays for all the days with relevant value and 0.00 for the days that do not contain data. When records generate (for at least one day in the chosen date range) and the number of days chosen is less than the number of days that the report can show (less than seven for weekly and less than 31 for monthly), the chart displays all the days (with 0 value for the days that do not generate records). A table displays all the days with relevant value and 0.00 for the days that do not contain data.
In all the CAR reports that display username, userid displays if CAR cannot retrieve the username. This situation can occur when the report gets generated for prior data where the user that was involved in a call at that time no longer exists in the system (Cisco Unified Communications Manager database).
Additional Information
User Reports
Users, managers, and CAR administrators can generate user reports. CAR includes the following user reports:
Bills
IndividualAvailable for users, managers, and CAR administrators. Individual bills provide
call information for the date range that you specify. You can generate, view, or mail summary or detail information about your individual phone bills. Those CAR administrators who are also application users cannot get this report.
DepartmentAvailable for managers and CAR administrators. Department bills provide call
information and quality of service (QoS) ratings. If you are a manager, you can generate a summary or detailed report of the calls that are made by all users who report to you, or only those users that you choose. If you are a CAR administrator, you can generate a summary or detailed report of the calls that some or all users in the system make. This report helps you to keep track of all calls on a user-level basis for the entire system.
Top N
By ChargeAvailable for managers and CAR administrators. The Top N by Charge reports list
the top number of users that incurred a maximum charge for calls during a period that you specify. Reports generated by destinations list the destinations that incurred the maximum charges. Reports generated by all calls list the calls that incurred the maximum charges. If you are a manager, the report includes the top charges for all calls that are made by users who report to you during the specified period. If you are a CAR administrator, the report includes the top charges for all calls that are made by all users on the system for the specified period.
By DurationAvailable for managers and CAR administrators. The Top N by Duration reports
list the top number of users that incurred a maximum time on calls during a period that you specify. Reports generated by destinations list the destinations that incurred the maximum duration. Reports generated by all calls list the calls that incurred the maximum duration. If you are a manager, the report lists the top number of users who report to you who incurred a maximum time for calls that are made during the chosen date range, starting with the longest. If you are a CAR administrator, the report lists the top number of users that incurred a maximum time for calls that were made during the chosen date range, starting with the longest.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
1-7
By Number of CallsAvailable for managers and CAR administrators. The Top N by Number
of Calls reports list the users who incurred the maximum number of calls. Reports that extensions generate list the extensions that placed or received the greatest number of calls during a period that you specify. If you are a manager, the report lists the top number of calls by user or extension, among the users who report to you, for the chosen date range. If you are a CAR administrator, the report lists the top number of calls for each user or extension in the system. Reports generated By Individual Users lists the Users who incurred the maximum number of calls. Reports generated By Extensions lists the extensions that have placed or received the greatest number of calls in the group (for a Manager) or in the System (for the CAR Administrator).
Manager Assistant (IPMA) summary and detail reports provide call completion usage details for IPMA managers. The manager reports can include calls that managers handle for themselves only, calls that assistants handle for managers only, or calls that both managers and assistants handle for managers.
Assistant Call UsageAvailable for CAR administrators. The Cisco IPMA summary and detail
reports provide call completion usage details for IPMA assistants. The assistant reports can include calls that assistants handle for themselves only, calls that assistants handle for managers, calls that assistants handle for themselves and for managers.
Cisco IP Phone ServicesAvailable for CAR administrators. The Cisco IP Phone Services report shows selected Cisco IP Phone services, the number of users that are subscribed to each of the selected services, and the utilization percentage for each of the selected services. You can create services for a wide variety of business and entertainment uses. If you have revenue tied to a service, such as for advertising, you can use this report to determine the number of users who have subscribed to the service. You can also use this report to indicate the popularity of selected services.
Additional Information
System Reports
CDR Analysis and Reporting provides system reports for managers and CAR administrators. Managers or CAR administrators can access the QoS summary report. Only CAR administrators can access all other reports. This section describes the following reports:
QoS
DetailAvailable for CAR administrators. The QoS detail report provides the QoS ratings that
are attributed to inbound and outbound calls on the Cisco Unified Communications Manager network for the period that you specify. Use this report to help monitor the voice quality of all calls on a user-level basis for the entire system. The call details in CDRs and CMRs and the QoS parameters that you choose provide the basis for assigning a particular voice-quality category to a call.
SummaryAvailable for managers and CAR administrators. This report provides a
two-dimensional pie chart that shows the distribution of QoS grades that are achieved for the specified call classifications and period. The report also provides a table that summarizes the calls for each QoS. The call details in CDRs and CMRs and the QoS parameters that you choose provide the basis for assigning a call to a particular voice-quality category. Use this report to monitor the voice quality of all calls through the network.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
1-8
OL-12483-01
Chapter 1
By GatewayAvailable for CAR administrators. This report shows the percentage of the calls
for each of the chosen gateways that meet the QoS criteria that the user chooses. You can generate this report on an hourly, daily, or weekly basis.
By Call TypesAvailable for CAR administrators. This report shows the percentage of the calls
for each chosen call type that meet the QoS criteria that the user chooses. You can generate this report on an hourly, daily, or weekly basis.
Traffic
SummaryAvailable for CAR administrators. This report provides information about the call
volume for a period that you specify. Include only those call types and QoS voice-quality categories that you choose. Use this report to determine the number of calls that are being made on an hourly, weekly, or daily basis. This report helps you identify high- and low-traffic patterns for capacity planning.
Summary by ExtensionAvailable for CAR administrators. This report provides information
about the call volume for a period and set of extensions that you specify. Include only those call types and extensions that you choose. You can generate the report on an hourly, weekly, or daily basis. This report helps you determine high-usage users or groups by aggregating the usage level across the users that you specify.
FAC/CMC
Client Matter CodeAvailable for CAR administrators. This report allows administrators to
view the originating and destination numbers, the date and time that the call originated, the call duration in seconds, and the call classification for calls that relate to each chosen client matter code.
Authorization Code NameAvailable for CAR administrators. This report allows
administrators to view the originating and destination numbers, the date and time that the call originated, the call duration in seconds, the call classification, and the authorization level for calls that relate to each chosen authorization code name.
Authorization LevelAvailable for CAR administrators. This report allows administrators to
view the originating and destination numbers, the date and time that the call originated, the call duration in seconds, the authorization code name, and the call classification for calls that relate to each chosen authorization level.
Malicious Call DetailsAvailable for CAR administrators. The Cisco Unified Communications Manager Malicious Call Identification (MCID) service tracks malicious calls. The Malicious Call Details report displays the details of malicious calls for a given date range. Precedence Call SummaryAvailable for CAR administrators. The Cisco Unified Communications Manager Call Precedence service allows authenticated users to preempt lower priority phone calls. The PDF version of the CAR Precedence Call Summary report displays the Call Summary for the precedence values in the form of a bar chart, on an hour of day, day of week, or day of month basis, for each of the precedence levels that you choose. CAR generates one chart for each precedence level, a table for each precedence level that lists the number of call legs, and a subtable that summarizes the percentage distribution for each of the precedence levels. CAR makes the report available on-demand; the report does not get autogenerated. System OverviewAvailable for CAR administrators. This report provides a list of reports that you can select to generate. You can choose a list of reports that you want to appear on the report. Use this report to see a high-level picture of the Cisco Unified Communications Manager network.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
1-9
CDR ErrorAvailable for CAR administrators. This report provides statistics for the number of error records in the CAR Billing_Error table and the reason for the errors. Use this report to determine whether CAR incurred any errors with CDR data while loading the CDR data. This report lists the percentage of CDRs that are invalid and the reason these CDRs have been classified as invalid.
Additional Information
Device Reports
Device reports help CAR administrators track the load and performance of Cisco Unified Communications Manager-related devices, such as conference bridges, voice-messaging server, and gateways. This section describes the device reports:
Gateway
DetailAvailable for CAR administrators. Use the gateway detail report to track issues with
specific gateways. The report provides a list of calls that used the specified gateways. Use this report to review detailed information about chosen gateways. You can specify gateways by type, such as all or some of the VG200 gateways in your system, or by only those gateways that use a particular route pattern. You can also specify search criteria based on call types and QoS values.
SummaryAvailable for CAR administrators. This report provides a summary of all the calls
that went through the gateways. It also provides the total number of calls and duration for each of the categories, namely Incoming, Tandem, and Outgoing (Long Distance, Local, International, Others, OnNet) and also, the total calls for each QoS value for each gateway in the system. Use this report to track the functionality of the system on a daily basis. If you discover issues that need to be studied further, use the gateway detail report.
UtilizationAvailable for CAR administrators. The report provides an estimate of the
utilization percentage of the gateway(s). You can examine the usage on the basis of each hour of a day or by a specified number of days of the week or month. Reports generate for each gateway that is chosen. Use this report for load balancing or capacity planning (to evaluate the need for adding or removing gateways, depending on their utilization). You can specify gateways by type, such as all or some of the VG200 gateways in your system, or by only those gateways that use a particular route pattern.
Route Plan
Route and Line Group UtilizationOnly CAR administrators can generate the route and line
group utilization report. This report provides an estimated utilization percentage of the chosen route and line group(s). You can examine the usage on the basis of each hour of a day or by a specified number of days of the week or month. Reports generate for each chosen route and line group. Use the report to analyze whether the route and line group capacity is sufficient to meet the usage requirements. Based on the results, you can decide whether additions are required. If you are load balancing gateways by using different route and line groups or route patterns and hunt lists that are assigned to the gateways, you can use this report to see the load for the whole grouping. This report also provides a convenient way of generating utilization information for a grouping of gateways by a particular route and line group; the group will also include any H.323 fallback gateways that are using the specified route and line group.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
1-10
OL-12483-01
Chapter 1
Route/Hunt List UtilizationAvailable for CAR administrators. The route/hunt list utilization
report provides an estimated utilization percentage of the chosen route/hunt list(s). You can examine the usage on the basis of each hour of a day or by a specified number of days of the week or month. Reports generate for each chosen route/hunt list. Use the report to analyze whether the route and line group capacity is sufficient to meet the usage requirements. Based on the results, you can decide whether additions are required. If you are load balancing gateways by using different route/hunt lists that are assigned to the gateways, you can use this report to see the load for the whole grouping. This report also provides a convenient way of generating utilization information for a grouping of gateways by a particular route/hunt list; the group will also include any H.323 fallback gateways that are using the chosen route/hunt list.
Route Pattern/Hunt Pilot UtilizationAvailable for CAR administrators. The route pattern/hunt
pilot utilization report provides an estimated utilization percentage of the chosen route pattern(s)/hunt pilot(s). You can examine the usage on the basis of each hour of a day or by a specified number of days of the week or month. Reports generate for each chosen route pattern/hunt pilot. Use the report to analyze system usage on the chosen route pattern/hunt pilot.
Conference Call DetailsAvailable for CAR administrators. The Conference Call Details report allows you to generate and view details about conference calls and conference bridges. The Summary Report displays the summary information of conference calls within a chosen date/time range but does not contain information about each individual conference participant call leg. The Detailed Report displays the detailed information about the conference calls within a chosen date/time range and includes information about each individual conference participant call leg. Conference Bridge UtilizationAvailable for CAR administrators. The report provides an estimate of the utilization percentage of the conference bridge(s). You can examine the usage on the basis of each hour of a day or by a specified number of days of the week or month. Generate reports for all the conference bridges in the system. Use this report to determine the activity on the conference bridge(s) and whether you need to add additional resources. This report helps you identify usage patterns, so you can plan capacity when you discover recurring peaks in the usage pattern. Voice Messaging UtilizationAvailable for CAR administrators. The report provides an estimate of the utilization percentage of the voice-messaging device(s). You can examine the usage on the basis of each hour of a day or by a specified number of days of the week or month. Reports generate for each voice-messaging device. Use this report to determine the activity on the voice messaging device(s) and whether you need to add additional resources. This report helps you to identify usage patterns, so you can plan capacity when you discover recurring peaks in the usage pattern.
Additional Information
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
1-11
Conference-Detail [Daily] - Disabled Conference Bridge Util-Day of Week [Weekly] - Enabled Gateway Util-Day of Week [Weekly] - Enabled Line Group Util-Day of Week [Weekly] - Disabled Route Group Util-Day of Week [Weekly] - Disabled Route/Hunt List Util-Day of Week [Weekly] - Disabled Route Pattern/Hunt Pilot Util-Day of Week [Weekly] - Disabled Traffic Summary-Day of Week [Weekly] - Enabled Traffic Summary-Day of Month [Monthly] - Enabled Voice Messaging Util-Day of Week [Weekly] - Enabled Gateway Summary [Monthly] - Enabled QoS Summary [Monthly] - Enabled System Overview [Monthly] - Enabled Department Bill Summary [Monthly] - Disabled Individual Bill Summary [Monthly] - Disabled Top N Calls [Daily] - Disabled Top N Calls [Monthly] - Disabled Top N Charge [Daily] - Disabled Top N Charge [Monthly] - Disabled Top N Duration [Daily] - Disabled Top N Duration [Monthly] - Disabled
To enable or disable report generation, see the Enabling or Customizing Reports for Automatic Generation section on page 4-7. To change the specific time each day, week, or month that reports get generated and get purged from the system see the Configuring CAR System Scheduler section on page 3-6.
Additional Information
CDR Search
In all CDR Search reports, the system only displays the oldest 100 records that fall into the time and date range that you configure. The CDR Search reports generate only in HTML format. You can configure CDR searches to verify the details of a call. The search forms groups of all the related legs of a call, which can be useful if the call involves a conference or transfer. This method helps you track the progress and quality of each part of an entire call. This section describes the following features:
CDR Search by User ExtensionAvailable for CAR administrators. You can search CDRs by user or directory number (calling, original called, final called, or bridge number) to analyze call details for the first 100 records that satisfy the search criteria. You can search for calls by using specific numbers for the period that you specify, which helps you trace calls that are placed from or to any
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
1-12
OL-12483-01
Chapter 1
CDR Analysis and Reporting Overview Internationalization for CDR Analysis and Reporting
specific numbers for diagnostic or informational purposes. All associated records, such as transfer and conference calls, appear together as a logical group. If you do not specify an extension, the system returns the first 100 CDR records that match the date range that you specify.
CDR Search by GatewayAvailable for CAR administrators. You can search CDRs by gateways to analyze the call details of calls that are using specific gateways. This method helps you trace issues on calls through specific gateways. CDR Search by Cause for Call TerminationAvailable for CAR administrators. You can search CDRs by cause for call termination to get information about the cause for the termination of a call. You can choose from a list of causes for call termination and can generate the report for a particular date range. The generated report contains the report criteria, along with the total number of calls that were placed in the given time. In addition, a table displays with the fields Call Termination Cause Value and description, the total number of calls, and the percentage of calls for each Call Termination Cause, and an option to choose the CDRs. CDR Search by Call Precedence LevelAvailable for CAR administrators. You can search CDRs by call precedence level. The report that generates allows you to view the CDRs on the basis of precedence. You can choose the precedence level and date range for which to generate a report. The report displays the number of calls and the percentage of these calls for each precedence level that you choose. Report criteria display the precedence levels and date range for which the report generated information in the Call Precedence Details window. You can view the media information and the CDR-CMR dump from the CDR Search by Precedence Levels Result window. The media information and CDR-CMR dump information display in separate windows. CDR Search for Malicious CallsAvailable for CAR administrators. You can search CDRs to get information about malicious calls. You can choose extensions and the date range for which to generate a report. The report displays the CDRs for all the malicious calls for a chosen extension and date range. Report criteria display the extensions and the date range for which the report generated information. You can view the media information and CDR-CMR dump from the CDR-CMR search results window. The media information and CDR-CMR dump information display in separate windows. Export CDR/CMRAvailable for CAR administrators. With this feature, you can export CDR/CMR dump information, for a given date range in the CSV format, to a location that you choose on your computer. You can also view the file size of the dump information and delete CDR/CMR files.
Note
CAR supports all Latin-1 language and Unicode language locales as Cisco Unified Communications Manager help specifies. Latin-1 languages include English and Western European languages. Unicode languages include Japanese and Chinese. Two types of locale exists: user and network. Each locale comprises a set of locale files. The following definitions describe the two types of files:
UserFiles that relate to user-related functions, such as phone display text, user applications, and user web pages.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
1-13
NetworkFiles that relate to network-related functions, such as phone and gateway tones. Country names designate network locales.
CAR supports the locales only if the Locale Installer has installed locales.
Note
Make sure that you have first installed the Cisco Unified Communications Manager Locale Installer on every server in the cluster.Make sure that you have first installed the Cisco Unified Communications Manager Locale Installer on the server. Installing the Locale Installer ensures that you have the latest translated text available for CAR. For more information on the Cisco Unified Communications Manager Locale Installer, see the Cisco Unified Communications Operating System Administration Guide. Only User and Manager windows support multiple locales. Administrator windows display in English. In the Cisco Unified Communications Manager Administration, set the user-preferred locale in the Cisco Unified Communications Manager database. You do this when you create a user from the End User Configuration window. Specify the preferred locale along with the user name, user ID, and so on. The Cisco Unified Communications Manager database stores this information. See the Cisco Unified Communications Manager Administration Guide for more detailed information. This section describes the elements that make up the internationalization of CAR.
Logon Page
When the client (browser) requests the logon information, the logon window header includes the most preferred locale of the client. The CAR system checks whether the CAR UI supports this locale. If the CAR UI does not support the locale, or if the locale is not installed in the system, the logon window displays in the Cisco Unified Communications Manager system default locale that is set in the Cisco Communications Manager Enterprise parameter. If CAR does not also support this locale, or the locale is not installed in the system, the locale gets set to English_United_States.
Authenticate and Show CAR Pages for Post Logon Windows
User credentials (in any language) get authenticated through the Cisco Unified Communications Manager database, and then CAR windows for non-administrative users (users or managers) display the user preferred locale. If the CAR UI does not support this locale, or if the locale is not installed in the system, the Cisco Unified Communications Manager system default locale gets used. If this locale is not supported by CAR, or is not installed in the system, windows display in the most preferred locale of the browser. When the browser-preferred locale is also not supported or not installed, the locale gets set to English_United_States. All information on the UI windows, including labels, number formats, and so on., displays based on the locale. The administrator windows always display in English.
Reports
Reports, which are generated in both CSV and PDF formats, display in the user preferred locale for non-administrative users (users or managers). However, the dynamic data (like the Company Name shown in the report header) displays in the same language as was used to enter it in the database. The locale provides the basis for the header, footers, number formats, and some static data (like call classification). Reports for administrators display in English.
Web Browsers
The CAR program supports the following web browsers:
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
1-14
OL-12483-01
Chapter 1
CDR Analysis and Reporting Overview CDR Analysis and Reporting Configuration Checklist
From any user PC in your network, browse into a server where CDR Analysis and Reporting displays in Cisco Unified Serviceability and log in as a CAR administrator, manager, or user.
Configuration Steps
Step 1 Step 2
Related Procedures and Topics Activating CAR, page 2-1 Configuring CDR Service Parameters, page 2-2 Configuring CAR Administrators, Managers, and Users, page 2-4 Configuring CAR System Parameters, page 3-1
Activate the CDR services on the appropriate servers. To ensure that the CDR records write to flat files, you must enable the Cisco Unified Communications Manager service parameters, CDREnabled and CallDiagnosticsEnabled. Set up CAR administrators, managers, and users in Cisco Unified Communications Manager Administration. Configure CAR system parameters for report generation:
Step 3 Step 4
Configure mail server. Configure dial plan. Configure gateway. Set system preferences.
Step 5 Step 6
Specify the value ranges that you consider good, acceptable, fair, and poor for jitter, latency, and lost packets. If desired, set a base monetary rate for the cost of calls on the basis of a time increment. You can further qualify the cost by applying the time-of-day and voice-quality factors. Enable the reports that you want to automatically generate by using the Automatic Generation/Alert Option window.
Defining the Quality of Service (QoS) Values, page 4-5 Configuring the Rating Engine, page 4-1
Step 7
Configuring Automatic Report Generation/Alert, page 4-6 Automatically Generated Reports Schedule, page 1-11
Step 8 Step 9
Configure the system scheduler to schedule when CAR loads CDRs as well as daily, weekly, and monthly reports.
Set the parameters for automatic purging of the CAR database. Configuring Automatic Database Purge, You can set the percentage of the CAR database that you want page 3-14 the system to use for CAR data and the age of CAR data that you want to delete when the CAR data exceeds the database size limit. You can disable automatic database purging, but the system enables purging by default.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
1-15
Table 1-1
Configuration Steps
Step 10
Set the charge limit notification that indicates when the daily charge limit for a user exceeds the specified maximum and the QoS notification that indicates when the percentage of good calls drops below a specified range or the percentage of poor calls exceeds a specified limit. If your users want to view localized user and manager reports, install the proper locales. To back up CAR, including the database and the pregenerated reports, make sure that you configure the CAR target in the backup utility.
Additional Information
Step 11 Step 12
Cisco Unified Communications Operating System Administration Guide Disaster Recovery Administration Guide
Related Topics
CAR Reports General Information, page 1-6 User Reports, page 1-7 System Reports, page 1-8 Device Reports, page 1-10 Automatically Generated Reports Schedule, page 1-11 Getting Started with CDR Analysis and Reporting, page 2-1 CAR System Configuration, page 3-1 CAR Report Configuration, page 4-1 CAR User Reports Configuration, page 5-1 CAR System Reports Configuration, page 6-1 CAR Device Reports Configuration, page 7-1 CDR Search Configuration, page 8-1 Export CDR/CMR Records Configuration, page 9-1 Understanding Cisco Call Detail Records, page 10-1 CAR Report Results, page 11-1
Cisco Unified Communications Operating System Administration Guide Cisco Unified Serviceability Administration Guide
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
1-16
OL-12483-01
CH A P T E R
Activating CAR, page 2-1 Configuring CDR Service Parameters, page 2-2 Configuring CDR Enterprise Parameters, page 2-3 Configuring CAR Administrators, Managers, and Users, page 2-4 Logging On to CAR, page 2-5 Logging Out of CAR, page 2-6 Accessing CAR Documentation Online Help, page 2-7 Related Topics, page 2-7
Activating CAR
CAR comprises a group of complementary services, which you can activate in the Service Activation window in Cisco Unified Serviceability. Before you can launch CAR from the Tools menu in Cisco Unified Serviceability, you must activate the CAR services by using the following procedure.
Procedure
Step 1
Choose Tools > Service Activation. The Service Activation window displays. From the Servers drop-down list box, choose the first node of the cluster server name. The window displays the service names for the server that you chose, the service type, and the activation status of the services.
Step 2
Note
Activate the CAR services on only the first node, where the Cisco Unified Communications Manager database resides.
Step 3
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
2-1
Cisco SOAP-CDRonDemand Service (optional). If you are using a third-party billing application that accesses CDR data via an HTTPS/SOAP interface, activate this service. Cisco CAR Scheduler Cisco CAR Web Service
Tip
Unchecking the check boxes next to the CDR Services and clicking Update deactivates the services. If you deactivate the Cisco CAR Web Service, the system removes CAR from the Tools menu in Cisco Unified Serviceability.
Step 4
After you have finished making the appropriate changes, click Update.
Additional Information
System Parameters
CDR Enabled FlagThis parameter determines whether CDRs are generated. Valid values
specify True (CDRs are generated) or False (CDRs are not generated). For this required field, the default value specifies False. Enable this parameter on all servers in the cluster.
CDR Log Calls With Zero Duration FlagThis parameter enables or disables the logging of
CDRs for calls which were never connected or which lasted less than 1 second. Cisco Unified Communications Manager logs unsuccessful calls (calls that result in reorder, such as might occur because of a forwarding directive failure or calls that attempt to go through a busy trunk) regardless of this flag setting. This represents a required field. The default value specifies False.
management records (CMRs), also called diagnostic records. Valid values specify Disabled (do not generate CMRs), Enabled Only When CDR Enabled Flag is True (generate CMRs only when the CDR Enabled Flag service parameter is set to True), or Enabled Regardless of CDR Enabled Flag (generates CMRs without regard to the setting in the CDR Enabled Flag service parameter). This represents a required field. The default value specifies Disabled.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
2-2
OL-12483-01
Chapter 2
Getting Started with CDR Analysis and Reporting Configuring CDR Enterprise Parameters
Display FAC in CDRThis parameter determines whether the Forced Authorization Code
(FAC) that is associated with the call displays in the CDR. Valid values specify True (display authorization code in CDRs) or False (do not display authorization code in CDRs) for this required field. The default value specifies False.
Show Line Group Member DN in finalCalledPartyNumber CDR FieldsThis parameter
determines whether the finalCalledPartyNumber field in CDRs shows the directory number (DN) of the line group member who answered the call or the hunt pilot DN. Valid values specify True (the finalCalledPartyNumber in CDRs will show the DN of the phone that answered the call) or False (the finalCalledPartyNumber in CDRs will show the hunt pilot DN). This parameter applies only to basic calls that are routed through a hunt list without feature interaction such as transfer, conference, call park, and so on. If a feature is involved in the call, the hunt pilot DN will show in the finalCalledPartyNumber field regardless of the setting in this parameter. This parameter does not apply to Cisco Unified Communications Manager Attendant Console. The default value for this required field specifies False.
Communications Manager adds the incoming prefix (as specified in the National Number Prefix, International Number Prefix, Subscriber Number Prefix, and Unknown Number Prefix service parameters) to the calling party number in the CDRs for that call. If the destination of the call is a gateway, Cisco Unified Communications Manager will not add the prefix to the CDRs even if this parameter is enabled. The default value for this required field specifies False.
CDR File Time IntervalThis parameter specifies the time interval for collecting CDR data. For example, if this value is set to 1, each file will contain 1 minute of CDR data (CDRs and CMRs, if enabled). The CDR database will not receive the data in each file until the interval has expired, so consider how quickly you want access to the CDR data when you decide what interval to set for this parameter. For example, setting this parameter to 60 means that each file will contain 60 minutes worth of data, but that data will not be available until the 60-minute period has elapsed, and the records are written to the CDR database. The default value is 1. The minimum value specifies 1, and the maximum value specifies 1440. The unit of measure for this required field represents a minute. Cluster IDThis parameter provides a unique identifier for the cluster. Because the parameter gets used in CDRs, collections of CDRs from multiple clusters can be traced to the sources.The default value specifies StandAloneCluster. The maximum length comprises 50 characters and provides a valid cluster ID that comprises any of the following characters: A-Z, a-z, 0-9, . -. Allowed CDRonDemand get_file Queries Per MinuteThis parameter specifies the maximum number of CDRonDemand get_file queries that are allowed per minute for the system. For this required field the default value specifies 10. The minimum value equals 1 and the maximum value equals 20. Allowed CDRonDemand get_file_list Queries Per MinuteThis parameter specifies the maximum number of CDRonDemand get_file_list queries that are allowed per minute for the system. For this required field the default value specifies 20. The minimum value equals 1 and the maximum value equals 40.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
2-3
Note
An application user that acts as a CAR administrator can configure all reports except for the Individual Bill report. An application user that acts as a CAR administrator cannot access end user (CCM user) windows. CAR notifications are not sent to the application user because there is no mail ID for the application user.
Tip
To use CAR, ensure at least one CAR administrator exists in the Cisco Unified Communications Manager database. Before you log in to CAR, you must configure at least one CAR user that has administrative privileges in CAR. To configure CAR administrators, managers, and users, perform the following procedure:
Procedure
Step 1
In Cisco Unified Communications Manager Administration, add an end user by choosing User Management > End User. For information on how to perform this task, see the Cisco Unified Communications Manager Administration Guide. To create a manager, make sure that you enter a value in the Manager User ID field.
Note
After creating the End User, edit the user password credentials by clicking the button Edit Credentials near the password text box. Uncheck the User Must Change at Next Login check box. If this action is not taken, you will get IMS_ERROR_CODE_5 (See Table 2-1 for the CAR Invalid Logon Messages) and will not be allowed to log in to CAR. Then you must log in to Cisco Unified Communications Manager Administration to manually reset the password.
Tip
Cisco recommends that you configure at least one CAR user that has administrative privileges in CAR before you start using CAR. If you have not configured a CAR administrator or want to configure another CAR administrator, continue with this procedure.
Step 2
Choose User Management > User Group; click Find. The Find and List User Groups window displays. Click Standard CAR Admin Users. The CAR User Group window displays. Click the Add End Users to Group button. Check the check box(es) for the users that you want to add to the group and click Add Selected. The user displays in the Users in Group group box.
Step 3
Step 4 Step 5
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
2-4
OL-12483-01
Chapter 2
Tip
To revoke CAR administrative privileges, check the check box of the user in Users in Group group box and click Delete Selected. When the warning message displays, click OK. The system revokes the privileges immediately.
Additional Information
Logging On to CAR
To log on to CAR, perform the following procedure:
Before you Begin
Before you can log in to CAR, verify that the Cisco CAR Web Service and the Cisco CAR Scheduler service run on the first node. After you activate the services, the option CDR Analysis and Reporting displays under the Tools menu in Cisco Unified Serviceability. For information on how to activate services, see the Activating CAR section on page 2-1. Configure CAR administrators, managers, and users as described in Configuring CAR Administrators, Managers, and Users section on page 2-4.
Procedure
Step 1
For CAR system administrators onlyFrom Cisco Unified Serviceability, choose Tools > CDR Analysis and Reporting. For CAR users or administratorsFrom the web browser, enter https://<Server-ip/name>:8443/car/Logon.jsp.
Step 2 Step 3
After the CAR logon window displays, enter your user ID in the User Name field. In the Password field, enter your password. Click Login. The CAR window displays. If the user ID or password is invalid, CAR displays one of the Identity Management System (IMS) messages that are listed in Table 2-1.
Table 2-1 CAR Invalid Logon Messages
Message Either the User Name or the Password entered is invalid. Ensure that you are logging into CAR as a CAR administrator or a regular End User. The account has been locked by System Administrator. Please contact the administrator.
IMS_ERROR_CODE 2
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
2-5
Table 2-1
Message The account has been temporarily locked. Please contact the System Administrator or try after sometime. The account has been deactivated due to lack of activity. Please contact the System Administrator. The account has been locked as the password has expired. Please reset the password or contact the System Administrator. The account has been locked as the password has expired. Please contact the System Administrator. The system has changed over to using LDAP authentication and the user is still in the old database. Please contact the System Administrator. The account has been locked as the user needs to log in manually and change the credential first. Please reset the password from the Cisco Unified Communications Manager Administration page or contact the System Administrator. System error. Please contact the System Administrator. Unable to Authenticate User due to System Error. Please contact System Administrator.
IMS_ERROR_CODE 4 IMS_ERROR_CODE 5
IMS_ERROR_CODE 8
Additional Information
At the CAR window, choose Logout. A prompt message For security reasons, it is advisable to close the browser window on Logout. Do you want to close the browser window? displays. To close the CAR window (browser), click OK; clicking Cancel displays the CAR Logon window.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
2-6
OL-12483-01
Chapter 2
Getting Started with CDR Analysis and Reporting Accessing CAR Documentation Online Help
Additional Information
Related Topics
Activating CAR, page 2-1 Configuring CAR Administrators, Managers, and Users, page 2-4 Logging On to CAR, page 2-5 Logging Out of CAR, page 2-6 Accessing CAR Documentation Online Help, page 2-7 CDR Analysis and Reporting Overview, page 1-1 CAR System Configuration, page 3-1 CAR Report Configuration, page 4-1 CAR User Reports Configuration, page 5-1 CAR System Reports Configuration, page 6-1 CAR Device Reports Configuration, page 7-1 CDR Search Configuration, page 8-1 Export CDR/CMR Records Configuration, page 9-1 Understanding Cisco Call Detail Records, page 10-1 CAR Report Results, page 11-1
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
2-7
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
2-8
OL-12483-01
CH A P T E R
Configuring CAR System Parameters, page 3-1 Configuring CAR System Scheduler, page 3-6 Configuring CAR System Database, page 3-12 Generating the Event Log, page 3-15 Related Topics, page 3-16
Configuring Mail Server Parameters, page 3-1 Configuring the Dial Plan, page 3-2 Restoring the Default Values for the CAR Dial Plan, page 3-3 Gateway Configuration, page 3-5 Configuring System Preferences, page 3-6
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
3-1
In the Mail ID field, enter the e-mail identifier that will be used in the From field when e-mails are sent. In the Password field, enter the password that is used to access the server that is running the e-mail system.
Note
CAR does not authenticate the user ID and password. You must disable authentication on the mail server or enter a valid user ID and password.
In the Confirm Password field, enter the same password from Step 3 to confirm. In the Mail Domain field, enter the domain name for the server that is running the e-mail system. In the Mail Server Name field, enter the name or IP address of the server that is running the e-mail system. To make the changes, click the Update button.
Additional Information
Note
If you have modified the default NANP that is provided in Cisco Unified Communications Manager Administration, or if you are outside the NANP, be sure to configure the dial plan in CAR according to your Cisco Unified Communications Manager dial plan. At least one condition must exist to configure the Dial Plan. See the Cisco Unified Communications Manager Administration Guide and the Cisco Unified Communications Manager System Guide for dial plan information. To configure the dial plan, define the parameters for the outgoing call classifications. Call classifications include International, Local, Long Distance, On Net, and so on. For example, if local calls in your area equal six digits in length, you would specify a row in the dial plan as follows: Condition = No of Digits 6 Pattern ! Call Type Local
This section describes how to update the CAR dial plan configuration.
Procedure
Step 1
Choose System > System Parameters > Dial Plan Configuration. The Dial Plan Configuration window displays. In the Toll Free Numbers field, enter the numbers in your dial plan that can be placed without a charge.
Step 2
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
3-2
OL-12483-01
Chapter 3
Step 3
ConditionSelect the condition of the rule where > represents greater than, < represents less than, and = represents a value that is equal to the specified value in the No of Digits field. No Of DigitsChoose the number of digits in the directory number to which this rule should be applied. If the number of digits does not impact the rule, specify NA. PatternEnter the pattern that is used for the call classification, where
GSignifies classified as specified in the rule (G equals a wildcard for the gateway area code
5551234).
XSignifies a single-digit number (such as 0, 1, or 9). Step 4
To add more rows, check the check box in the row below where you want to add rows and click the Add Rows link. The system adds a row above the row that you chose. To delete a row, check the check box by the row that you want to delete and click the Delete Rows link.
Note
CAR classifies calls on the basis of the dialed number as stored in the CDRs. If the dialed digits differ from the digits that are written in CDRs (due to number transformations), configure the Dial Plan in CAR on the basis of how the digits show up in CDRs.
Step 5
Additional Information
Row 1 2 3 4 5 6 7
Condition = = = = = = =
No of Digits 5 7 10 10 10 11 11
Pattern ! ! T! G! ! T! XG!
Call Type OnNet Local Others Local Long Distance Others Local
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
3-3
Table 3-1
Row 8 9
Condition = >
No of Digits 11 3
Pattern ! 011!
The following information explains the default table values in Table 3-1:
Row 1If the number of digits dialed equals 5 and the pattern is ! (more than one digit, in this case, 5 digits), the call gets classified as OnNet. Row 2If the number of digits dialed equals 7 and the pattern is ! (more than one digit, in this case, 7 digits), the call gets classified as Local. Row 3If the number of digits dialed equals 10 and the pattern is T! (more than one digit, in this case a 10-digit number that starts with a Toll Free number code), the call gets classified as Others. Row 4If the number of digits dialed equals 10 and the pattern is G! (more than one digit, in this case a 10-digit number that starts with a gateway code), the call gets classified as Local. Row 5If the number of digits dialed equals 10 and the pattern is ! (more than one digit, in this case a 10-digit number), the call gets classified as Long Distance. Row 6If the number of digits dialed equals 11 and the pattern is T! (more than one digit, in this case an 11-digit number that starts with a toll-free number code), the call gets classified as Others. Row 7If the number of digits dialed equals 11 and the pattern is XG! (more than one digit, in this case an 11-digit number that starts with any single digit followed by a gateway code), the call gets classified as Local. Row 8If the number of digits dialed equals 11 and the pattern is ! (more than one digit, in this case an 11-digit number), the call gets classified as Long Distance. Row 9If the number of digits dialed is greater than 3 and starts with 011, the call gets classified as International.
If none of the conditions gets satisfied, the call gets classified as Others. This section describes how to restore the NANP dial plan values in CAR.
Procedure
Step 1
Choose System > System Parameters > Dial Plan Configuration. The Dial Plan Configuration window displays. Click the Restore Defaults button. The restoration takes effect at midnight. To make changes take effect immediately, restart the Cisco CAR Scheduler service. For information on restarting services, see the Cisco Unified Serviceability Administration Guide.
Step 2
Additional Information
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
3-4
OL-12483-01
Chapter 3
Gateway Configuration
Tip
Configure the gateways in CAR for existing Cisco Unified Communications Manager system gateways. After you add gateways to Cisco Unified Communications Manager Administration, configure the new gateways in CAR. When gateways are deleted from the Cisco Unified Communications Manager system, the system automatically removes the gateways (and any configuration settings that you specified) from CAR. CAR uses the area code information to determine whether calls are local or long distance. You must provide the Number of Ports information for each gateway to enable CAR to generate the Utilization reports.
Note
G acts as a wildcard for the gateway area codes that are used in Dial Plan configuration. This section describes how to configure gateways in CAR.
Procedure
Step 1
Choose System > System Parameters > Gateway Configuration. The Gateway Configuration window displays.
Note
If you have not configured gateways in Cisco Unified Communications Manager Administration, a message displays that indicates that you have not configured gateways for the system.
Step 2
To update the area code for all gateways, enter the area code in the Area Code field and click the Set Area Code button. A message displays that indicates that you must click Update to save changes. Click OK. To update the area code for specific gateways, enter the area code for each gateway that you want to configure in the area code field for that gateway.
Step 3
In the Max No. of Ports field, enter the number of ports for each gateway that you want to configure. The Max No of Ports range goes from 1 to 1000.
Note
CAR uses the values that were provided for the gateway when it was added in Cisco Unified Communications Manager Administration. Therefore, some gateways will already have an area code setting or have a zero for maximum number of ports, depending on the details that were specified when the gateway was added in Cisco Unified Communications Manager Administration. CAR does not accept 0 as a value for the maximum number of ports; you may be prompted to change the maximum number of ports for all gateways with a value of zero.
Step 4
To make the changes, click the Update button. You can run reports in CAR on any or all of the configured gateways.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
3-5
Choose System > System Parameters > System Preferences. The System Preferences window displays. The list of available system parameters displays in the Parameter Name list.
Step 2
In the Parameter Value field, enter the desired value for the parameter as described in Table 3-2.
Table 3-2 System Preferences Parameter
Parameter COMPANY_NAME
Description Enter the company name that is used as header information in reports.
Step 3
Configuring the CDR Load Schedule, page 3-7 Scheduling Daily Reports, page 3-9 Scheduling Weekly Reports, page 3-10 Scheduling Monthly Reports, page 3-11
Note
Loading CDR data can cause performance degradation on Cisco Unified Communications Manager. Cisco recommends that you use the default loading time or schedule the loading to occur at a time when Cisco Unified Communications Manager performance will be least affected.
Additional Information
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
3-6
OL-12483-01
Chapter 3
Tip
To manually delete the CAR data and reload the database with CDRs, see the Manually Purging or Reloading the CAR Database section on page 3-13.
Procedure
Step 1
Choose System > Scheduler > CDR Load. The CDR Load window displays. Choose one of the following options:
a.
Step 2
Disable LoaderTo disable CDR data loading, check the Disable Loader check box and click the Update button. CDR data will not load into CAR until you enable CDR loading. Changes take effect at midnight. You can force the change to take effect immediately by stopping and restarting the CAR Scheduler service. To enable CDR data loading, uncheck the Disable Loader check box and continue with Step 3 to configure the load parameters.
b.
Continuous Loading 24/7To enable the CDR Loader to run continuously 24 hours a day, 7 days a week to load CDRs/CMRs into the CAR database, check the Continuous Loading 24/7 check box and click the Update button. The CAR Scheduler service stops, and the CAR Loader is configured to run immediately (within 1 to 2 minutes). The CAR Scheduler service restarts. If no new files for processing exist, the CDR Loader sleeps and then checks periodically for new files to be loaded.
Note
If this option is chosen, it takes precedence over and ignores the other CDR and CMR load parameters on the screen, such as Time, Loading Interval, Duration, and Uninhibited Loading. Load CDR OnlyTo load only CDR records into the CAR database, check the Load CDR only check box and click the Update button. Continue to Step 3 to configure the load parameters. With this option, CMR records do not load into the CAR database.
c.
Note
To restore the default loading schedule, so CDR data loads every day from midnight to 5 a.m., click the Restore Defaults button. Changes take effect at midnight. For the change to take effect immediately, stop and restart the Cisco CAR Scheduler service in the Control CenterFeature Services window.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
3-7
Step 3
In the Load CDR & CMR area, complete the fields as described in Table 3-3.
Table 3-3 Load CDR & CMR Values
Value Choose the hour and minute that you want CAR to begin loading CDR data from the CDR flat files. Choose the interval at which you want records loaded. The interval can range from every 15 minutes to every 24 hours. Enter the number of minutes that you want to allow CDR data to load. Depending on the size of the CDR flat files, CAR performance may degrade when CDRs load. You can limit the time that is allowed for loading, but in doing so, the possibility exists that only a portion of the CDR data will be loaded in the time that you set. Be sure to reconcile the duration limit that you place with the interval. For example, if you load CDR data every 15 minutes, the duration of loading cannot exceed 15 minutes.
Duration
Uninhibited loading allows you to set a time during which CDR data will load continuously. CDR data does not load automatically in the duration that is specified. The CDR data loads uninhibited in the specified duration only if loading starts at the duration that is specified in the Load CDR and CMR area settings. If CDR data loading starts at an uninhibited loading interval, loading continues to the end of the uninhibited loading interval, plus the time in the duration field that is set in the Load CDR and CMR area, or until no new files to process exist. Uninhibited loading take precedence over any values that are set for scheduled loading. If you do not want uninhibited loading of CDR data, set the From and To values at 00:00.
Step 4
In the Uninhibited Loading of CDR area, complete the fields as described in Table 3-4:
Table 3-4 Uninhibited Loading of CDR Values
Field From To
Value Choose the hour and minute that you want continuous loading of CDR data to begin. Choose the hour and minute that you want continuous loading of CDR data to end.
Step 5
Click the Update button. CAR will load CDR data based on the time, interval, and duration that you have specified. Changes take effect at midnight. You can force the change to take effect immediately by stopping and restarting the CAR Scheduler service.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
3-8
OL-12483-01
Chapter 3
Note
If Continuous Loading 24/7 is selected, the CAR Scheduler service restarts automatically when the Update button is clicked. CAR will load CDR data immediately (within 1 to 2 minutes).
Additional Information
Note
Report generation can degrade the performance of the Cisco Unified Communications Manager; schedule reports when performance will be least affected.
Before You Begin
Specify the reports to be generated by using the Automatic Generation/Alert Option. See the Configuring Automatic Report Generation/Alert section on page 4-6, for more information. This section describes how to schedule the time and duration of the automatic daily reports.
Procedure
Step 1
Choose System > Scheduler > Daily. The Daily Scheduler window displays. From the Time drop-down list box, choose the hour and minute that you want daily reports to be generated. A 24-hour clock represents time, where 0 equals midnight, and 1 through 11 represent a.m. hours, and 12 through 23 represent the p.m. hours of 1 p.m. through 11 p.m., respectively.
Step 2
Step 3
From the Life drop-down list box, choose the duration of the report from the range of 0 to 12 days.
Tip Step 4
If you set the life of the report to 00, the report does not generate.
Click the Update button. Reports with report generation interval of Daily in the Automatic Generation/Alert Option, and enabled, automatically generate every day at the time that you specify and are deleted after the number of days that you specify. Changes take effect at midnight. You can force the change to take effect immediately by stopping and restarting the CAR Scheduler service.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
3-9
Tip
To restore the defaults, click the Restore Defaults button. By default, the daily reports run at 1 a.m. every day and get purged after two days.
Additional Information
Note
Report generation can degrade Cisco Unified Communications Manager performance; schedule reports when performance will be least affected.
Before You Begin
Use the Automatic Generation/Alert Option to specify the reports to be generated. See the Configuring Automatic Report Generation/Alert section on page 4-6, for more information. This section describes how to schedule the day, time, and duration of the automatic weekly reports.
Procedure
Step 1
Choose System > Scheduler > Weekly. The Weekly Scheduler window displays. From the Day of Week drop-down list box, choose the day that you want reports to be generated. From the Time drop-down list box, choose the hour and minute that you want reports to be generated. A 24-hour clock represents time, where 0 equals midnight, and 1 through 11 represent a.m. hours, and 12 through 23 represent the p.m. hours of 1 p.m. through 11 p.m., respectively.
Step 2 Step 3
Step 4
From the Life drop-down list box, choose the duration of the report from the range of 00 to 12 weeks. The option that you choose indicates how many weeks the report remains on the disk before the report gets deleted.
Tip Step 5
If you set the life of the report to 00, the report does not generate.
Click the Update button. Reports with report generation interval of Weekly in the Automatic Generation/Alert Option, and enabled, automatically generate every week at the time that you specify and are deleted after the number of weeks that you specify. Changes take effect at midnight. For the changes to take effect immediately, stop and restart the CAR Scheduler service in the Control CenterFeature Services window.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
3-10
OL-12483-01
Chapter 3
Tip
To restore the defaults, click the Restore Defaults button. By default, weekly reports run at 4 a.m. every Sunday and get purged after four weeks.
Additional Information
Note
Report generation can degrade Cisco Unified Communications Manager performance; schedule reports when performance will be least affected.
Before You Begin
Use the Automatic Generation/Alert Option to specify the reports to be generated. See the Configuring Automatic Report Generation/Alert section on page 4-6 for more information. This section describes how to schedule the day, time, and duration of the automatic monthly reports.
Procedure
Step 1
Choose System > Scheduler > Monthly. The Monthly Scheduler window displays. From the Day of Month drop-down list box in the Monthly Bill Generation row, choose the day of the month on which you want the report to be generated. If you set the value to a day that does not occur in a given month (such as 29, 30, or 31), the report generates on the last day of that month.
Step 2
Step 3
From the Time drop-down list box in the Monthly Bill Generation row, choose the hour and minute that you want the report to be generated. A 24-hour clock represents time, where 0 equals midnight, and 1 through 11 represent a.m. hours, and 12 through 23 represent the p.m. hours of 1 p.m. through 11 p.m., respectively.
Step 4
From the Life drop-down list box in the Monthly Bill Generation row, choose the duration of the report from the range of 00 to 12 months. The option that you choose indicates how many months the report remains on the disk before the report gets deleted.
Tip Step 5
If you set the life of the report to 00, the report does not generate.
From the Day of Month drop-down list box in the Other Monthly Reports row, choose the day of the month on which you want the reports generated. If you set this value to a day that does not occur in a given month (such as 29, 30, or 31), the report generates on the last day of that month.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
3-11
Step 6
From the Time drop-down list box in the Other Monthly Reports row, choose the hour and minute that you want reports to be generated. A 24-hour clock represents time, where 0 equals midnight, and 1 through 11 represent a.m. hours, and 12 through 23 represent the p.m. hours of 1 p.m. through 11 p.m., respectively.
Step 7
From the Life drop-down list box in the Other Monthly Reports row, choose the life of the report from the range of 00 to 12 months. The option that you choose indicates how many months the report remains on the disk before the report gets deleted.
Tip Step 8
If you set the life of the report to 00, the report does not generate.
Click the Update button. Reports with report generation interval of Monthly in Automatic Generation/Alert Option, and enabled, automatically generate every month at the time that you specify and are deleted after the number of months that you specify. Changes take effect at midnight. For the changes to take effect immediately, stop and restart the CAR Scheduler service in the Control CenterFeature Services window.
Tip
To restore the defaults, click the Restore Defaults button. By default, monthly bill reports run at 3 a.m. on the first day of every month and get purged after two months, and other monthly reports run at 2 a.m. on the first day of every month and get purged after two months.
Additional Information
Manually Purging or Reloading the CAR Database, page 3-13 Configuring Automatic Database Purge, page 3-14
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
3-12
OL-12483-01
Chapter 3
Choose System > Database > Manual Purge. The Manual Database Purge window displays. Choose one of the following actions:
Step 2
To delete the existing CAR data and reload the CAR database, click the Reload All Call Detail Records button. The system displays a message that indicates that deleting the records may impact system performance. To continue the reload process, click OK. The system begins loading the CDRs into the CAR database within 5 minutes and continues uninterrupted for up to 6 hours. To monitor the progress of the reload, generate the CDR Load event log, as described in the Generating the Event Log section on page 3-15. After the system loads the new records, the system loads the records according to the schedule that is configured in the Configuring the CDR Load Schedule section on page 3-7. By default, CDR data loads every day from midnight to 5 a.m.
Step 3
In the Select Table field, choose the table in the database that you want purged. To view the tables for which manual purge is permitted, the total number of records in the table, and the latest record and oldest record in the table, click the Table Information button. The Table Information window displays. To return to the Manual Database Purge window, click the Close button.
Step 4
In the Delete records field, choose a date that will determine which records will be purged by clicking one of the following radio buttons:
Older thanChoose a date for which all records before that date will be deleted. BetweenChoose a range of dates between which all records will be deleted.
Step 5 Step 6
Choose the date range of the CAR records that you want to delete. To delete all records older than or between the dates that you specified, click the Purge button. A prompt advises you that you are about to permanently delete the specified records. To purge the records, click the OK button or click the Cancel button to abort the purge operation. If you click OK, the records get purged from the selected table. After successful deletion of records, the status message shows the number of records that were deleted from the table.
Step 7
Additional Information
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
3-13
Choose System > Database > Configure Automatic Purge. The Configure Automatic Database Purge window displays.
Note
To restore the default values for the fields in this window, click the Restore Defaults button.
Tip
From the Low Water Mark drop-down list box, choose the minimum percentage of the maximum CAR database size that you want the system to use for CAR data. The maximum CAR database size equals 6 GB.The system notifies you when the CAR database size reaches the low or the high water mark; it also notifies you when the CAR database size exceeds two million records.For information on configuring an e-mail alert, see the Enabling or Disabling Alerts by Mail section on page 4-8, for instructions.
Step 2 Step 3
From the High Water Mark drop-down list box, choose the maximum percentage of the maximum CAR database size that you want the system to use for CAR data. The maximum database size equals 6 GB. In the Min Age of Call Detail Records field, enter the minimum number of days that you want CAR to use when it purges CDRs from the CAR database. Enter a number between 1 and 180. When the database size exceeds the high water mark or the number of CDRs in the CAR database exceeds two million records, CAR deletes the CDRs that are older than the number of days that you specified in this field.
Step 4
In the Max Age of Call Detail Records field, enter the maximum number of days that you want to keep the CDRs in the CAR database. Enter a number between 1 and 180. CAR deletes all CDRs that are older than the specified number of days. Click the Update button. The changes take effect at midnight. To make changes take effect immediately, restart the Cisco CAR Scheduler service.
Step 5
Tip
When CAR loads the CDRs into the CAR database, the CAR Scheduler checks the low and high water marks and the two million record limit. If any threshold is breached, CAR immediately deletes records that are older than the number of days that you specify in Step 3.
Additional Information
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
3-14
OL-12483-01
Chapter 3
Choose System > Log Screens > Event Log. The Event Log window displays. Click the Daily radio button to choose daily jobs, the Weekly radio button to choose weekly jobs, or the Monthly radio button to choose monthly jobs. In the List of Jobs area, choose the tasks for which you want information. To add the chosen task to the Selected Jobs area, click the right arrow icon. To remove tasks from the Selected Jobs area, choose the task that you want removed and click the left arrow icon. To add tasks with a different frequency, repeat Step 2 through Step 4. For example, you can have daily reports and reports that include monthly or weekly tasks. Choose the status to include in the report. You must choose at least one status as described in Table 3-5.
Note
The system chooses the status of each event log report by default.
Event Log Report Status
Table 3-5
Description If this check box is checked, the event log report includes tasks that have completed. If this check box is checked, the event log report includes tasks that are currently in progress. If this check box is checked, the event log report includes tasks that have failed.
Step 8 Step 9
Choose a date range by choosing From and To values. To generate the event log report, click the OK button. The event log displays information about the chosen tasks. Table 3-6 describes the event log report output.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
3-15
Table 3-6
Description Serial number Name of the task Time the task starts Time the task ends Unsuccessful, in progress, completed Date the task is scheduled
Additional Information
Related Topics
Configuring Mail Server Parameters, page 3-1 Configuring the Dial Plan, page 3-2 Restoring the Default Values for the CAR Dial Plan, page 3-3 Configuring the CDR Load Schedule, page 3-7 Scheduling Daily Reports, page 3-9 Scheduling Weekly Reports, page 3-10 Scheduling Monthly Reports, page 3-11 Configuring CAR System Database, page 3-12 Configuring Automatic Database Purge, page 3-14 Generating the Event Log, page 3-15 Configuring Automatic Report Generation/Alert, page 4-6 Configuring Notification Limits, page 4-8 QoS by Gateway Report Configuration, page 6-6 Gateway Detail Report Configuration, page 7-1 Gateway Summary Report Configuration, page 7-4 Gateway Utilization Report Configuration, page 7-6
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
3-16
OL-12483-01
CH A P T E R
Note
Rating parameters for calls get used during CAR loading. If you want old CDR records in the CAR database to use new values for these parameters, you must reload all the CDRs in the CAR database. Quality of service Automatic generation of reports with alerts Notification limits Configuring the Rating Engine, page 4-1 Defining the Quality of Service (QoS) Values, page 4-5 Configuring Automatic Report Generation/Alert, page 4-6 Configuring Notification Limits, page 4-8 Related Topics, page 4-9
Before you start generating reports with CAR, configure the system. See the CAR System Configuration section on page 3-1.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
4-1
Note
If you do not change the default value for charge base/block, the cost will always equal zero because the default base charge per block equals zero. The charge of any call comprises the multiplication of the basic charge of the call, multiplication factor for time of day, and multiplication factor for voice quality. You can set the basic charge for a call through the Report Config > Rating Engine > Duration window. See the following list:
Basic charge = cost, or number of units, applied to the duration block that is specified in the Number of Blocks section. Number of blocks = total duration of call, in seconds, for which you want the base charge to be applied.
You can set the multiplication factor for time of day through the Report Config > Rating Engine > Time of Day window. The basis of the settings provides the connect time of the call. You can set the multiplication factor for voice quality through the Report Config > Rating Engine > Voice Quality window. This section contains the following topics:
Setting the Base Rate and Duration, page 4-2 Factoring Time of Day into Call Cost, page 4-3 Factoring Voice Quality into Call Cost, page 4-4
Note
If you use the default base charge value, reports do not provide any costs. The system provides default values, but if left to the defaults, the Rating Engine stays disabled and does not provide costs.
Procedure
Step 1
Choose Report Config > Rating Engine > Duration. The Call Duration window displays. In the To (seconds) field, enter the seconds for which you want the base charge to be applied. For example, if you are billed in 6-second increments, enter 6 in this field. If you are billed a flat rate for each minute regardless of call duration, enter 60 in this field, so the charge is based on whole minutes. In the Base Charge/Block field, enter the cost basis for the seconds that are shown in the To (seconds) field. For example, if you are billed 6 cents for each minute in 6-second increments, enter 0.006 in this field. If you are billed 7 cents for each minute in whole minutes (no incremental billing), enter 0.07 in this field. In the preceding examples, if you are billed in 6-second increments and the cost is 0.006 for each 6-second increment, a call that lasts 7 seconds would cost 0.012. Rationale: Each 6-second increment costs 0.006, and two blocks from 0 to 6 seconds occurred.
Step 2
Step 3
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
4-2
OL-12483-01
Chapter 4
Likewise, if you are billed in whole minutes and the cost is 7 cents for each minute, a call that lasted 3 minutes would cost 21 cents. Rationale: Each 60-second increment costs 7 cents, and three blocks of 1 minute occurred.
Step 4
Tip
To restore the default setting, click the Restore Defaults button. By restoring the default value of 0 for the call charge/block, you effectively disable the other factors that are used in determining call cost.
Additional Information
Note
If you do not want to increase call cost by time of day, you can use the default values. The default multiplication factor specifies 1, so no increase in call cost for time of day occurs.
Procedure
Step 1
Choose Report Config > Rating Engine > Time of Day. The Time of Day window displays. To add rows, click the Add Rows link. The system adds a row between 00:00:00 and 23:59:59. To add additional rows, check the check box for the row above which you want to add a new row and click the Add Rows link.
Step 2
Step 3
Note
To delete rows, check the check box for the row that you want to delete and click the Delete Rows link.
Step 4
Enter the From and To time ranges in 24-hour, minute, and second format. A 24-hour period, from 00:00:00 to 23:59:59, represents the default time range. If you want to set one time-of-day range from 8 am to 5 pm, you will need to establish three time-of-day ranges: the first from 00:00:00 to 07:59:59, the second from 08:00:00 to 16:59:59, and the third from 17:00:00 to 23:59:59.
Note
You must use Coordinated Universal Time (UTC), rather than a 12-hour clock when factoring Time of Day into Call Cost.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
4-3
Step 5
Enter the Multiplication Factor that designates a number by which you want the base charge/block to be multiplied when a call occurs in the specified time range. For example, if you charge a premium of double the price for calls that are placed between 8 a.m. and 5 p.m., the multiplication factor is 2.00. A multiplication factor of 1.00 does not affect the cost of the call. To add the time-of-day and multiplication factors, click the Update button.
Step 6
Tip
Additional Information
Note
If you do not want to increase call cost by voice quality, you can use the default values. The default multiplication factor equals 1.00, so no increase in call cost occurs for voice quality.
Procedure
Step 1
Choose Report Config > Rating Engine > Voice Quality. The Voice Quality window displays. In the Multiplication Factor field, enter the number by which you want the base charge/block to be multiplied when a call occurs in the specified voice-quality category. The Defining the Quality of Service (QoS) Values section on page 4-5, defines the voice-quality categories: Good, Acceptable, Fair, and Poor. Example Voice Quality Good; Factor 1.2 Voice Quality Acceptable; Factor 1.0 Voice Quality Fair; Factor 1.0 Voice Quality Poor; Factor 0.8 A good call gets charged 1.2 times that of an acceptable or fair call. A poor call gets charged 0.8 times that of an acceptable or fair call.
Step 2
Note
Multiplication factor for a good call >= the multiplication factor for acceptable >= multiplication factor for fair >= multiplication factor for poor.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
4-4
OL-12483-01
Chapter 4
Step 3
To set the voice quality multiplication factors, click the Update button.
Tip
Additional Information
Note
Be aware that the classifications of NA and Infinity are case-sensitive. This section describes how to define the QoS values.
Procedure
Step 1
Choose Report Config > Define QoS. The Define Quality of Service window displays. Table 4-1 describes the QoS default values.
Table 4-1 QoS Default Values
Default Good0.00 to 15.00 Acceptable15.01 to 30.00 Fair30.01 to 45.00 Poor45.01 to infinity Good0 to 20 Acceptable21 to 100 Fair101 to 150 Poor151 to infinity No default values apply.
Jitter
Latency
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
4-5
Step 2
To add rows, check the check box for the row above which you want to add a new row and click the Add Rows link. The new row gets added above the row that you checked, and the check box is cleared. The rows represent the values that CAR uses to quantify the conditions good, acceptable, fair, and poor in the QoS reports. For each value set, enter the upper and lower limits in the From and To columns.
Note
To delete rows, check the check box for the row that you want to delete and click the Delete Rows link.
Step 3 Step 4
For each value that you have set, choose the Quality of Service. Click the Update button.
Tip
To restore the default QoS values, click the Restore Defaults button.
Additional Information
Note
In large setups, with a large number of gateways, route groups, route lists, and route patterns, enabling all the Utilization reports (Gateway Utilization, Line Group Utilization, Route Group Utilization, Route List Utilization, and Route Pattern Utilization) increases the CPU usage of the system, therefore increasing the time in which reports are generated. This also affects system performance. Cisco recommends that you enable only Gateway Utilization reports for automatic generation, due to the number of gateways that are typically found in a large system. You can generate all Utilization reports on demand by selecting five or less gateways, route groups, route lists, or route groups. Automatically generating reports involves a two-step process:
First, enable the reports that you want to generate unless they are enabled by default. See the Enabling or Customizing Reports for Automatic Generation section on page 4-7. Second, schedule the reports for the day and time that you want them to generate. (CAR provides a default schedule. If the default schedule is acceptable, only enable the reports that you want to generate automatically.) See the Configuring CAR System Scheduler section on page 3-6.
CAR provides e-mail alerts for various events. Enabling the system for e-mail alerts involves a two-step process:
First, enable the e-mail alerts. Default enables some, but not all, reports. See the Enabling or Disabling Alerts by Mail section on page 4-8.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
4-6
OL-12483-01
Chapter 4
Second, configure the e-mail that is sent when the alert criteria are met. See the Enabling or Disabling Alerts by Mail section on page 4-8
Additional Information
Choose Report Config > Automatic Generation/Alert. The Automatic Report Generation/Alert Option window displays. In the Reports [Report Generation Interval] box, choose the report that you want to automatically generate based on the schedule that you defined in the System Scheduler. See the Configuring CAR System Scheduler section on page 3-6. In the Status field, choose Enabled or Disabled. To customize the report or have the report e-mailed when it is generated, click the Customize Parameters button. The Customize Parameters window displays.
Step 2
Step 3 Step 4
Each report provides different customization options, depending on the type of report.
Choose the CSV or PDF radio button, depending on the type of report that you want the system to mail. To have the report mailed to all CAR administrators, check the Mailing Option check box. To save the values that you specified, click the Update button. The Customize Parameters window closes. To enable or customize other reports, repeat Step 4 through Step 7. Click the Update button. Changes take effect at midnight. You can force the change to take effect immediately by stopping and restarting the CAR Scheduler service.
Step 8 Step 9
Additional Information
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
4-7
Note
For the QoS and Charge Limit Notifications, see the Configuring Notification Limits section on page 4-8.
Procedure
Step 1
Choose Report Config > Automatic Generation/Alert. The Automatic Report Generation/Alert window displays. In the Alerts by Mail box, choose the alert that you want to enable or disable. In the Status field, choose Enabled or Disabled. Click the Update button. To enable or disable alerts by mail, repeat Step 2 and Step 4. Changes take effect at midnight. You can force the change to take effect immediately by stopping and restarting the CAR Scheduler service.
Additional Information
Choose Report Config > Notification Limits. The Set Limits for Notification window displays. In the Daily QoS Parameters area, enter a threshold for good and poor calls. The threshold applies in the form of a percentage of all calls that must be exceeded to trigger an e-mail alert to the administrator. The default for good calls specifies less than 20 percent, meaning that when good calls represent less than 20 percent of all calls per day, an alert gets sent. The default for poor calls specifies greater than 30 percent, meaning that when poor calls represent more than 30 percent of all calls per day, an alert gets sent.
Step 2
Step 3 Step 4
In the Daily Charge Limit area, enter the number of monetary units (such as dollars, francs, or pounds) that, when exceeded by any user in the system, will trigger sending an e-mail alert to the administrator. Click the Update button.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
4-8
OL-12483-01
Chapter 4
Changes take effect immediately. The new values get used whenever the next alert is sent.
Additional Information
Related Topics
Configuring CAR System Parameters, page 3-1 Enabling or Customizing Reports for Automatic Generation, page 4-7 Configuring Mail Server Parameters, page 3-1 Enabling or Disabling Alerts by Mail, page 4-8 Configuring Mail Server Parameters, page 3-1 Configuring CAR System Scheduler, page 3-6 Configuring the Rating Engine, page 4-1 Defining the Quality of Service (QoS) Values, page 4-5 Configuring CAR System Database, page 3-12 Setting the Base Rate and Duration, page 4-2 Factoring Time of Day into Call Cost, page 4-3 Factoring Voice Quality into Call Cost, page 4-4
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
4-9
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
4-10
OL-12483-01
CH A P T E R
AdministratorsGenerate system reports to help with load balancing, system performance, and troubleshooting. ManagersGenerate reports for users, departments, and QoS to help with call monitoring for budgeting or security purposes and for determining the voice quality of the calls. Individual usersGenerate a billing report for their calls. Configuring Bills Reports, page 5-1 Configuring Top N Reports, page 5-4 Configuring Cisco Unified Communications Manager Assistant Usage Reports, page 5-11 Configuring Cisco IP Phone Services Reports, page 5-13 Mailing a Report, page 5-14 Searching for Users, page 5-15 Related Topics, page 5-16
Note
Depending on your job function, you may not have access to every report that is described in this chapter.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
5-1
Configuring Individual Bills Reports, page 5-2 Configuring Department Bills Reports, page 5-3
If you are a user or manager, choose Bills > Individual. If you are a CAR administrator, choose User Reports > Bills > Individual.
In the Report Type field, choose Summary or Detail. Summary reports provide a summary of all calls for a chosen period, including the call classification (Internal, Local, Long Distance, International, or On Net), the QoS information, the total number of calls that were made, and the charges that were incurred. Detailed reports provide the date of the call, origination time of the call, origination number (calling number), destination number (called number), call classification (On Net, Internal, Local, Long Distance, International, Incoming, Tandem, or Others), QoS information, duration of time for which the call lasted (in seconds), and the charge for the call, based on the rating engine configuration in CAR for all calls over a chosen period.
Step 3
In the Available Reports field, choose an automatically generated report (if available) and go to Step 6, or use the default Generate New Report and go to Step 4.
Note
You can only choose the automatically generated report if you are logged in as CAR administrator. The automatically generated reports do not display in the drop-down list box if you are logged in as a manager or individual user.
Step 4 Step 5
Choose the date range for the period for which you want to see call information. If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area. Be aware that the CSV-format report is limited to 20,000 records. If you want the report in PDF format, choose PDF (portable document format) in the Report Format area. Be aware that the PDF-format report is limited to 5000 records. Click the View Report button. The report displays. If you want to mail the report, click the Send Report button. To send the report, follow the procedure that is described in the Mailing a Report section on page 5-14.
Step 6
Step 7
Additional Information
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
5-2
OL-12483-01
Chapter 5
Use CAR only during off-peak hours. Otherwise, data collection and report generation could cause performance degradation on the Cisco Unified Communications Manager system. This section describes how to generate, view, or mail summary or detail information about departmental bills.
Procedure
Step 1
If you are a manager, choose Bills > Department. If you are a CAR administrator, choose User Reports > Bills > Department.
In the Report Type field, choose Summary or Detail. Summary reports provide a summary of all calls for a chosen period, including the call classification (On Net, Internal, Local, Long Distance, International, Incoming, Tandem, or Others), the QoS information, the total number of calls that were made, and the charges that were incurred. Detailed reports provide the date of the call, origination time of the call, origination number (calling number), destination number (called number), call classification (On Net, Internal, Local, Long Distance, International, Incoming, Tandem, or Others), QoS information, duration for which the call lasted (in seconds), and the charge for the call, based on the rating engine configuration in CAR for all calls over a chosen period.
Step 3
In the Available Reports field, choose an automatically generated report (if available) and go to Step 13, or use the default Generate New Report and go to Step 4.
Note
You can only choose the automatically generated report if you are logged in as a CAR administrator. The automatically generated reports do not display in the drop-down list box if you are logged in as a manager.
Choose the date range for the period for which you want to see call information. If you are a manager, continue with Step 6; otherwise, if you are a CAR administrator, continue with Step 10. To choose all of your direct reports, check the Select All Reportees check box. The List of Reportees shows your direct reports. To choose individual reportees, choose the reports that are shown in the List of Reportees. Click the Add button. The department bill includes only users who are listed in the Selected Reportees box. To see the reportees under a particular user, choose the user and click the Down button. All reportees to the chosen user display. If you are a CAR administrator, check the Select All Users check box to include all users. If you are a manager, proceed to Step 12.
Step 7 Step 8
Step 9
Step 10
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
5-3
Step 11
To specify individual users, enter the user ID of the individual that you want to include in the report in the User ID field. Click the Add button. You can also use a provided search function. See the Searching for Users section on page 5-15, for instructions on using the search feature.
Step 12
If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area. Be aware that the CSV-format report is limited to 20,000 records. If you want the report in PDF format, choose PDF (portable document format) in the Report Format area. Be aware that the PDF-format report is limited to 5000 records. Click the View Report button. The report displays. If you want to mail the report, click the Send Report button. To send the report, perform the procedure that is described in the Mailing a Report section on page 5-14.
Step 13
Step 14
Additional Information
Configuring Top N by Charge Reports, page 5-4 Configuring Top N by Duration Reports, page 5-7 Configuring Top N by Number of Calls Reports, page 5-9
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
5-4
OL-12483-01
Chapter 5
Caution
Use CAR only during off-peak hours. Otherwise, data collection and report generation could cause performance degradation on the Cisco Unified Communications Manager system.
Procedure
Step 1
If you are a manager, choose Top N > By Charge. If you are a CAR administrator, choose User Reports > Top N > By Charge.
In the Select Call Types area, check the check boxes for the types of calls that you want the report to include. These boxes display only when you choose Generate New Report from the Available Reports drop-down list box, as described in Step 4. Table 5-1 describes the call types.
Tip
To check all check boxes, click Select All; to uncheck the check boxes, click Clear All.
Top N by Charge Call Types
Table 5-1
Description Outgoing calls that originate on one Cisco Unified Communications Manager network, go out through a trunk, and terminate on a different Cisco Unified Communications Manager network. For CAR purposes, any outgoing call can be classified as an On Net call if it is configured as such in the CAR dial plan configuration window. See Configuring the Dial Plan section on page 3-2. Intracluster calls that originate in the Cisco Unified Communications Manager network and end in the same Cisco Unified Communications Manager network (no gateways or trunks are used). Local calls that are routed through the public switched telephone network (PSTN) to numbers without an area code or that include one of the local area codes. Long-distance calls that originate in the Cisco Unified Communications Manager network going out through the PSTN. International calls that originate in the Cisco Unified Communications Manager network going out through the PSTN. Inbound calls that originate outside the Cisco Unified Communications Manager network and enter the Cisco Unified Communications Manager network through a gateway.
Internal
Local
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
5-5
Table 5-1
Description Inbound calls that originate outside the Cisco Unified Communications Manager network, enter the Cisco Unified Communications Manager network through a gateway, and transfer outbound from the Cisco Unified Communications Manager network through a gateway. All other outgoing calls, such as toll-free numbers or emergency calls such as 911.
Others
Step 3
In the Report Type field, choose a report type as described in Table 5-2.
Table 5-2 Top N by Charge Report Types
Description This report lists the users who incurred the maximum charges. This report lists the destinations that incurred the maximum charges. This default report lists the calls that incurred the maximum charges.
Note
Top N Destination by Charge reports display the Top destinations based on the charge incurred. If the same destination number comprises different call classifications (for example, some are Internal and some are Incoming), they get treated and listed separately in these reports.
Step 4
In the Available Reports field, choose an automatically generated report (if available) and go to Step 8 or use the default setting, Generate New Report, and go to Step 5.
Note
You can only choose the automatically generated report if you are logged in as CAR administrator. The automatically generated reports do not display in the drop-down list box if you are logged in as a manager.
Enter the number (n) of records to display in the report in the No of Records field. The default designates five. Choose the date range for the period for which you want to generate the report. If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area. Be aware that the CSV-format report is limited to 20,000 records. If you want the report in PDF format, choose PDF (portable document format) in the Report Format area. Be aware that the PDF-format report is limited to 5000 records. Click the View Report button. The report displays. If you want to mail the report, click the Send Report button. To send the report, perform the procedure that is described in the Mailing a Report section on page 5-14.
Step 8
Step 9
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
5-6
OL-12483-01
Chapter 5
Additional Information
Caution
Use CAR only during off-peak hours. Otherwise, data collection and report generation could cause performance degradation on the Cisco Unified Communications Manager system.
Procedure
Step 1
If you are a manager, choose Top N > By Duration. If you are a CAR administrator, choose User Reports > Top N > By Duration.
In the Select Call Types area, check the check boxes for the types of calls that you want included in the report. These boxes display only when you choose Generate New Report from the Available Reports drop-down list box, as described in Step 4. Table 5-3 describes the call types.
Table 5-3 Top N by Duration Call Types
Description Outgoing calls that originate on one Cisco Unified Communications Manager network, go out through a trunk, and terminate on a different Cisco Unified Communications Manager network. For CAR purposes, any outgoing call can be classified as an On Net call if it is configured as such in the CAR dial plan configuration window. See Configuring the Dial Plan section on page 3-2. Intracluster calls that originate in the Cisco Unified Communications Manager network and end in the same Cisco Unified Communications Manager network (no gateways or trunks are used). Local calls that are routed through the public switched telephone network (PSTN) to numbers without an area code or that include one of the local area codes. Long-distance calls that originate in the Cisco Unified Communications Manager network going out through the PSTN. International calls that originate in the Cisco Unified Communications Manager network going out through the PSTN. Inbound calls that originate outside the Cisco Unified Communications Manager network, enter through a gateway, and go into the Cisco Unified Communications Manager network.
Internal
Local
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
5-7
Table 5-3
Description Inbound calls that originate outside the Cisco Unified Communications Manager network, enter the Cisco Unified Communications Manager network through a gateway, and then are transferred outbound from the Cisco Unified Communications Manager network through a gateway. All other outgoing calls, such as toll-free numbers or emergency calls such as 911.
Others
Step 3
In the Report Type field, choose a report type as described in Table 5-4.
Table 5-4 Top N by Duration Report Types
Description This report lists the users who incurred the maximum duration. This report lists the destinations that incurred the maximum duration. This report lists the calls that incurred the maximum duration.
Note
Top N Destinations by Duration reports display the Top destinations based on the duration of the calls. If the same destination number comprises different call classifications (for example, some are Internal and some are Incoming), they get treated and listed separately in these reports.
Step 4
In the Available Reports field, choose an automatically generated report (if available) and go to Step 8 or use the default setting, Generate New Report, and go to Step 5.
Note
You can only choose the automatically generated report if you are logged in as a CAR administrator. The automatically generated reports do not display in the drop-down list box if you are logged in as a manager.
Enter the number (n) of records to display in the report in the No of Records field. The default designates five. Choose the date range for the period for which you want to generate the report. If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area. Be aware that the CSV-format report is limited to 20,000 records. If you want the report in PDF format, choose PDF (portable document format) in the Report Format area. Be aware that the PDF-format report is limited to 5000 records. Click the View Report button. The report displays.
Step 8
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
5-8
OL-12483-01
Chapter 5
Step 9
If you want to mail the report, click the Send Report button. To send the report, perform the procedure that is described in the Mailing a Report section on page 5-14.
Additional Information
Caution
Use CAR only during off-peak hours. Otherwise, data collection and report generation could cause performance degradation on the Cisco Unified Communications Manager system.
Procedure
Step 1
If you are a manager, choose Top N > By Number of Calls. If you are a CAR administrator, choose User Reports > Top N > By Number of Calls.
In the Select Call Types area, check the check boxes for the types of calls that you want included in the report. These boxes display only when you choose Generate New Report from the Available Reports drop-down list box, as described in Step 4. Table 5-5 describes the call types.
Table 5-5 Top N by Number of Calls Call Types
Description Outgoing calls that originate on one Cisco Unified Communications Manager network, go out through a trunk, and terminate on a different Cisco Unified Communications Manager network. For CAR purposes, any outgoing call can be classified as an On Net call if it is configured as such in the CAR dial plan configuration window. See Configuring the Dial Plan section on page 3-2. Intracluster calls that originate in the Cisco Unified Communications Manager network and end in the same Cisco Unified Communications Manager network (no gateways or trunks are used). Local calls that are routed through the public switched telephone network (PSTN) to numbers without an area code or that include one of the local area codes. Long-distance calls that originate in the Cisco Unified Communications Manager network going out through the PSTN. International calls that originate in the Cisco Unified Communications Manager network going out through the PSTN.
Internal
Local
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
5-9
Table 5-5
Description Inbound calls that originate outside the Cisco Unified Communications Manager network, enter through a gateway, and go into the Cisco Unified Communications Manager network. Inbound calls that originate outside the Cisco Unified Communications Manager network, enter the Cisco Unified Communications Manager network through a gateway, and transfer outbound from the Cisco Unified Communications Manager network through a gateway. All other outgoing calls, such as toll-free numbers or emergency calls such as 911.
Tandem
Others
Step 3
In the Report Type field, choose a report type as described in Table 5-6.
Table 5-6 Top N by Number of Calls Report Types
Description This report lists the users who incurred the maximum number of calls. This report lists the extensions that have placed or received the greatest number of calls in your group (managers) or the system (CAR administrators).
Step 4
In the Available Reports field, choose an automatically generated report (if available) and go to Step 8 or use the default Generate New Report and go to Step 5.
Note
You can only choose the automatically generated report if you are logged in as a CAR administrator. The automatically generated reports do not display in the drop-down list box if you are logged in as a manager.
Enter the number (n) of records that display in the report in the No of Records field. The default designates five. Choose the date range for the period for which you want to generate the report. If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area. Be aware that the CSV-format report is limited to 20,000 records. If you want the report in PDF format, choose PDF (portable document format) in the Report Format area. Be aware that the PDF-format report is limited to 5000 records. Click the View Report button. The report displays. If you want to mail the report, click the Send Report button. To send the report, perform the procedure that is described in the Mailing a Report section on page 5-14.
Step 8
Step 9
Additional Information
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
5-10
OL-12483-01
Chapter 5
CAR User Reports Configuration Configuring Cisco Unified Communications Manager Assistant Usage Reports
Configuring Manager Call Usage for Cisco Unified Communications Manager Assistant Reports, page 5-11 Configuring Assistant Call Usage for Cisco Unified Communications Manager Assistant Reports, page 5-12
Configuring Manager Call Usage for Cisco Unified Communications Manager Assistant Reports
This section describes how to generate a manager call usage report for Cisco Unified Communications Manager Assistant. Only CAR administrators can generate Cisco Unified Communications Manager Assistant reports.
Caution
Use CAR only during off-peak hours. Otherwise, data collection and report generation could cause performance degradation on the Cisco Unified Communications Manager system.
Procedure
Step 1
Choose User Reports > Cisco Unified Communications Manager Assistant > Manager Call Usage. The Call Usage for Manager window displays. From the Report Type drop-down list, choose either Summary or Detail.
Step 2
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
5-11
From the Calls handled by drop-down list, choose Manager, Assistant for Manager, or Manager & Assistant for Manager. Choose the date range for the period for which you want to see call information. In the Select Manager(s) box, either check the Select All Manager(s) check box and enter a managers ID or click the Select Manager(s) link to search for a managers ID and enter the ID(s) in the Manager Id field. Click Add. The ID that you chose displays in the Selected Manager(s) box. If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area. Be aware that the CSV-format report is limited to 20,000 records. If you want the report in PDF format, choose PDF (portable document format) in the Report Format area. Be aware that the PDF-format report is limited to 5000 records. The report displays. If you want to mail the report, click the Send Report button. To send the report, perform the procedure that is described in the Mailing a Report section on page 5-14.
Step 6
Step 7
Step 8
Note
To remove a manager from the Selected Manager(s) list, highlight the ID and click Remove. To remove all managers from the list, click Remove All.
Additional Information
Configuring Assistant Call Usage for Cisco Unified Communications Manager Assistant Reports
This section describes how to generate an assistant call usage report for Cisco Unified Communications Manager Assistant. Only CAR administrators can generate these reports.
Caution
Use CAR only during off-peak hours. Otherwise, data collection and report generation could cause performance degradation on the Cisco Unified Communications Manager system.
Procedure
Step 1
Choose User Reports > Cisco Unified Communications Manager Assistant> Assistant Call Usage. The Call Usage for Assistant window displays. From the Report Type drop-down list, choose either Summary or Detail. From the Calls handled by drop-down list, choose Assistant, Assistant for Manager, or Assistant & Assistant for Manager. Choose the date range for the period for which you want to see call information.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
5-12
OL-12483-01
Chapter 5
Step 5
In the Select Assistant(s) box, either check the Select All Assistant(s) check box and enter an assistants ID or click the Select Assistant(s) link to search for an assistants ID and enter the ID(s) in the Assistant Id field. Click Add. The ID that you chose displays in the Selected Assistant(s) box. If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area. Be aware that the CSV-format report is limited to 20,000 records. If you want the report in PDF format, choose PDF (portable document format) in the Report Format area. Be aware that the PDF-format report is limited to 5000 records. Click the View Report button. The report displays. If you want to mail the report, click the Send Report button. To send the report, perform the procedure that is described in the Mailing a Report section on page 5-14.
Step 6
Step 7
Step 8
Step 9
Note
To remove a manager from the Selected Assistant(s) list, highlight the ID and click Remove. To remove all assistants from the list, click Remove All.
Additional Information
Caution
Use CAR only during off-peak hours. Otherwise, data collection and report generation could cause performance degradation on the Cisco Unified Communications Manager system.
Procedure
Step 1
Choose User Reports > Cisco Unified IP Phone. The Cisco Unified IP Phone window displays a list of all Cisco Unified IP Phone services that have been configured in the system.
Step 2 Step 3
In the List of Cisco Unified IP Phone area, choose the services that you want to include in the report. Click the right arrow to add the chosen service to the Selected Cisco Unified IP Phone box. The report will include all services that are listed in this box when you generate it.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
5-13
Step 4
If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area. Be aware that the CSV-format report is limited to 20,000 records. If you want the report in PDF format, choose PDF (portable document format) in the Report Format area. Be aware that the PDF-format report is limited to 5000 records. The report displays. If you want to mail the report, click the Send Report button. To send the report, perform the procedure that is described in the Mailing a Report section on page 5-14.
Step 5
Additional Information
Mailing a Report
You can e-mail all reports in CAR. You can send a report by mail from any report window in CAR. You can also view the report first and then send it.
Before You Begin
To e-mail reports, first configure valid Mail Parameters. The Mail Parameters allow CAR to send e-mail by using the e-mail server in your system. See the Configuring Mail Server Parameters section on page 3-1, for more information. Also, set up the details of the report that you want generated. See the following sections:
Configuring Bills Reports, page 5-1 Configuring Top N Reports, page 5-4 Configuring Cisco IP Phone Services Reports, page 5-13 Configuring Cisco Unified Communications Manager Assistant Usage Reports, page 5-11 CAR System Reports Configuration, page 6-1 CAR Device Reports Configuration, page 7-1 CDR Search Configuration, page 8-1
Within any CAR Reports window or after viewing the report, click the Send Report button. The Mail To window displays. Enter the e-mail ID for the user to whom you want to send the report. You can search for a user by clicking the To button. A User Search window displays. In the First Name and Last Name fields, enter characters of the first or last name of the user and click the Search button. A User Search Results window displays in the same page and lists all users who matched the search criteria that you entered.
Step 2 Step 3
Step 4
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
5-14
OL-12483-01
Chapter 5
Step 5
In the row for the user to whom you want to send the report, click the Select link. The user that you chose gets added to the To field of the Mail To window. Repeat this step to add more users to the list of people who will be e-mailed a copy of this report.
Step 6
When you have added all users, click the Close button in the User Search window. The users who are listed in the Search Users window get copied to the To field of the Mail To window. To add a user to the Cc field, click the Cc button and follow the same instructions as described in Step 4 through Step 6. In the Subject field, enter a subject message (optional). In the Message area, enter a message (optional). To send the report, click the Send button.
Additional Information
User ReportsDepartment and individual bills, Top N by charge, duration, and number of calls, Cisco Unified Communications Manager Assistant, and Cisco Unified IP Phone System ReportsQoS details, Traffic Summary (Extn) All reports that can be generated can be mailed via the Send Report button
You must use the window in User Reports or System Reports that allows you to search for users. This section describes how to search for a user.
Procedure
Step 1
Click the Search Users link. A User Search window displays. In the First Name and Last Name fields, enter characters of the first or last name of the user and click the Search button. A User Search Results window displays in the same window and lists all users who matched the search criteria that you entered.
Step 2
Step 3
In the row for the user that you want, click the Select link. The user that you chose gets added to the List of Users in the User Search window. Repeat this step to add more users.
Step 4
When you have added all users, click the Close button in the User Search window.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
5-15
Additional Information
Related Topics
CAR User Reports Configuration, page 5-1 CAR System Reports Configuration, page 6-1 CAR System Configuration, page 3-1 CAR Device Reports Configuration, page 7-1 CDR Search Configuration, page 8-1 Cisco IP Phone Services Report Results, page 11-16 Configuring Cisco Unified Communications Manager Assistant Usage Reports, page 5-11 Configuring Manager Call Usage for Cisco Unified Communications Manager Assistant Reports, page 5-11 Configuring Assistant Call Usage for Cisco Unified Communications Manager Assistant Reports, page 5-12 Top N By Number of Calls Report Results, page 11-8 Configuring Top N by Charge Reports, page 5-4 Configuring Top N by Duration Reports, page 5-7 Top N By Charge or Duration Report Results, page 11-6 Configuring Top N by Number of Calls Reports, page 5-9 Bill Summary Report Results, page 11-2 Bill Detail Report Results, page 11-4 Configuring Individual Bills Reports, page 5-2
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
5-16
OL-12483-01
CH A P T E R
AdministratorsGenerate system reports to help with load balancing, system performance, and troubleshooting. ManagersGenerate reports for users, departments, and QoS to help with call monitoring for budgeting or security purposes and for determining the voice quality of the calls. Individual usersGenerate a billing report for each users calls. Configuring QoS Reports, page 6-1 Configuring Traffic Reports, page 6-10 Configuring Client Matter Code Reports, page 6-16 Configuring Malicious Call Details Reports, page 6-19 Configuring Precedence Call Summary Reports, page 6-20 Configuring System Overview Reports, page 6-21 Configuring CDR Error Reports, page 6-22 Related Topics, page 6-23
Note
Depending on your job function, you may not have access to every report that is described in this chapter.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
6-1
You can either view reports that the system automatically generates or generate new reports. Only CAR administrators can schedule reports for automatic generation. See the Configuring CAR System Scheduler section on page 3-6, for more information.
QoS Parameter Operators
Table 6-1 describes the QoS parameter operators that you use in generating the QoS reports.
Table 6-1 QoS Parameter Operators
Operator >=
Description Choose this operator to generate jitter, latency, or lost packet data that is greater than or equal to the specified value. Choose this operator to generate jitter, latency, or lost packet data that is equal to the specified value. Choose this operator to generate jitter, latency, or lost packet data that is less than or equal to the specified value. Choose this operator to preclude jitter, latency, or lost packet data. Choose this operator to generate jitter, latency, or lost packet data that occurs between one value and another value. When you choose this operator, a second field displays, so you can set the start and end values.
= <=
N.A. Between
The following sections describe how to configure QoS detail, summary, gateway, and call types reports:
QoS Detail Report Configuration, page 6-2 QoS Summary Report Configuration, page 6-4 QoS by Gateway Report Configuration, page 6-6 QoS by Call Types Report Configuration, page 6-8
Use CAR only during off-peak hours. Otherwise, data collection and report generation could cause performance degradation on the Cisco Unified Communications Manager system. This section describes how to generate, view, or mail detailed information about the system QoS.
Procedure
Step 1
Choose System Reports > QoS > Detail. The QoS Detail window displays.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
6-2
OL-12483-01
Chapter 6
Step 2
In the Select Call Types area, check the check boxes for the types of calls that you want the report to include. Table 6-2 describes the call types.
Table 6-2 QoS Detail Report Call Types
Description Outgoing calls that originate on one Cisco Unified Communications Manager network, go out through a trunk, and terminate on a different Cisco Unified Communications Manager network. For CAR purposes, any outgoing call can be classified as an On Net call if it is configured as such in the CAR dial plan configuration window. See Configuring the Dial Plan section on page 3-2. Intracluster calls that originate in the Cisco Unified Communications Manager network and end in the same Cisco Unified Communications Manager network (no gateways or trunks are used). Local calls that are routed through the public switched telephone network (PSTN) to numbers without an area code or that include one of the local area codes. Long-distance calls that originate in the Cisco Unified Communications Manager network and go out through the PSTN. International calls that originate in the Cisco Unified Communications Manager network and go out through the PSTN. Inbound calls that originate outside the Cisco Unified Communications Manager network, enter through a gateway, and go into the Cisco Unified Communications Manager network. Inbound calls that originate outside the Cisco Unified Communications Manager network, enter the Cisco Unified Communications Manager network through a gateway, and are transferred outbound from the Cisco Unified Communications Manager network through a gateway. All other outgoing calls, such as toll-free numbers or emergency calls such as 911.
Internal
Local
Long Distance
International
Incoming
Tandem
Others
Step 3
In the Select QoS area, check the check boxes for the voice-quality categories that you want included in the report. The parameters set in the Defining the Quality of Service (QoS) Values section on page 4-5, provide the basis for all voice-quality categories.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
6-3
Table 6-3
Description QoS for these calls represents the highest possible quality. QoS for these calls, although slightly degraded, still fall within an acceptable range. QoS for these calls is degraded, although it still falls within a usable range. QoS for these calls designates unsatisfactory quality. These calls did not match any criteria for the established QoS categories.
Step 4 Step 5
Choose the date range for the period for which you want to see QoS information. In the Select Users field, you can either choose all users or search for particular users. To choose all users, check the Select All Users check box. To choose individual users, enter the user ID of the individual in the User ID field and click the Add button.
Note Step 6
You can also use a provided search function. See the Searching for Users section on page 5-15.
If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area. Be aware that the CSV-format report is limited to 20,000 records. If you want the report in PDF format, choose PDF (portable document format) in the Report Format area. Be aware that the PDF-format report is limited to 5000 records. Click the View Report button. The report displays. If you want to mail the report, click the Send Report button. To send the report, perform the procedure that is described in the Mailing a Report section on page 5-14.
Step 7
Step 8
Additional Information
Use CAR only during off-peak hours. Otherwise, data collection and report generation could cause performance degradation on the Cisco Unified Communications Manager system. This section describes how to generate, view, or mail summary information about the system QoS.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
6-4
OL-12483-01
Chapter 6
Procedure
Step 1
If you are a manager, choose QoS > Summary. If you are a CAR administrator, choose System Reports > QoS > Summary.
In the Available Reports field, choose an automatically generated report (if available) and go to Step 6, or use the default setting, Generate New Report, and go to Step 3.
Note
You can only choose the automatically generated report if you are logged in as a CAR administrator. The automatically generated reports do not display in the drop-down list box if you are logged in as a manager.
Step 3
In the Select Call Types area, check the check boxes for the types of calls that you want the report to include. Table 6-4 describes the call types.
Table 6-4 QoS Summary Report Call Types
Description Outgoing calls that originate on one Cisco Unified Communications Manager network, go out through a trunk, and terminate on a different Cisco Unified Communications Manager network. For CAR purposes, any outgoing call can be classified as an On Net call if it is configured as such in the CAR dial plan configuration window. See Configuring the Dial Plan section on page 3-2. Intracluster calls that originate in the Cisco Unified Communications Manager network and end in the same Cisco Unified Communications Manager network (no gateways or trunks are used). Local calls that are routed through the public switched telephone network (PSTN) to numbers without an area code or that include one of the local area codes. Long-distance calls that originate in the Cisco Unified Communications Manager network and go out through the PSTN. International calls that originate in the Cisco Unified Communications Manager network and go out through the PSTN. Inbound calls that originate outside the Cisco Unified Communications Manager network, enter through a gateway, and go into the Cisco Unified Communications Manager network.
Internal
Local
Long Distance
International
Incoming
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
6-5
Table 6-4
Description Inbound calls that originate outside the Cisco Unified Communications Manager network, enter the Cisco Unified Communications Manager network through a gateway, and transfer outbound from the Cisco Unified Communications Manager network through a gateway. All other outgoing calls, such as toll-free numbers or emergency calls such as 911.
Others
Step 4 Step 5
If you chose Generate New Report in Step 2, choose the date range for the period for which you want to generate the report. If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area. The CSV-format report is limited to 20,000 records. If you want the report in PDF format, choose PDF (portable document format) in the Report Format area. The PDF-format report is limited to 5000 records. Click the View Report button. The report displays. If you want to mail the report, click the Send Report button. To send the report, perform the procedure that is described in the Mailing a Report section on page 5-14.
Step 6
Step 7
Caution
Use CAR only during off-peak hours. Otherwise, data collection and report generation could cause performance degradation on the Cisco Unified Communications Manager system. This section describes how to generate, view, or mail QoS information about all chosen gateways.
Before You Begin
Configure the gateway by using the procedures in the Gateway Configuration section on page 3-5.
Procedure
Step 1
Choose System Reports > QoS > By Gateways. The QoS based on Gateways window displays. In the Generate Reports field, choose a time as described in Table 6-5.
Step 2
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
6-6
OL-12483-01
Chapter 6
Table 6-5
Description Displays the percentage of the calls, for each selected gateway, that satisfies the QoS criteria for the period that you specify in Step 6. The percentage results show for hour of day. Displays the percentage of the calls, for each selected gateway, that satisfies the QoS criteria for the period that you specify in Step 6. The percentage results show for day of week. Displays the percentage of the calls, for each selected gateway, that satisfies the QoS criteria for the period that you specify in Step 6. The percentage results show for day of month.
Day of Week
Day of Month
In the Jitter field, choose the operator that you want to use and enter the value for jitter. See the QoS Parameter Operators section on page 6-2, for descriptions of operators. In the Latency field, choose the operator that you want to use and enter the value for latency. See the QoS Parameter Operators, page 6-2, for descriptions of operators. In the Lost Packets field, choose the operator that you want to use and enter the value for number of lost packets. See the QoS Parameter Operators, page 6-2, for descriptions of operators. Choose the date range of the period for which you want to see call information. To choose the type of gateway that you want included in the report, perform one of the following tasks:
To display all the gateways that are configured in the system, click Gateway Types in the column on the left side of the window. To expand the tree structure and display the type of gateway from which you can choose, click the icon next to Gateway types. To choose a gateway that uses a particular route pattern/hunt pilot, rather than a gateway type, click Route Patterns/Hunt Pilots in the column on the left side of the window. The tree structure expands and displays the gateways that are associated with the configured Route Patterns/Hunt Pilots. To expand the tree structure and display route pattern/hunt pilot for you to choose, click the icon next to Route Patterns/Hunt Pilots.
Note
You can also search for specific route patterns/hunt pilots by entering part of the name of the route pattern(s)/hunt pilot(s) in the Route Patterns/Hunt Pilots box in the column on the left side of the window. CAR searches for the route pattern(s)/hunt pilot(s) that matches the search string.
Step 8
From the list, choose a gateway type. The gateway name displays in the List of Gateways box.
Note
The List of Gateways box will display up to 200 gateways that are configured for the chosen gateway type.
Step 9
In the List of Gateways box, choose the gateways that you want to include in the report.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
6-7
Note
You can generate a report for up to 15 gateways at a time. If you select more than 15 gateways, you will see the message Select 15 or fewer gateways to generate new report.
Step 10
Click the down arrow icon to move the chosen gateway to the list of Selected Gateways box. The gateway that you chose displays in the Selected Gateways box. If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area. Be aware that the CSV-format report is limited to 20,000 records. If you want the report in PDF format, choose PDF (portable document format) in the Report Format area. Be aware that the PDF-format report is limited to 5000 records. Click the View Report button. The report displays. If you want to mail the report, click the Send Report button. To send the report, perform the procedure that is described in the Mailing a Report section on page 5-14.
Step 11
Step 12
Step 13
Additional Information
Caution
Use CAR only during off-peak hours. Otherwise, data collection and report generation could cause performance degradation on the Cisco Unified Communications Manager system.
Procedure
Step 1
Choose System Reports > QoS > By Call Types. The QoS based on Call Types window displays. In the Generate Report field, choose a time as described in Table 6-6.
Step 2
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
6-8
OL-12483-01
Chapter 6
Table 6-6
Description Displays the percentage of the calls, for each call type, that satisfies the QoS criteria for the period that you specify in Step 7. The percentage results show for hour of day. Displays the percentage of the calls, for each call type, that satisfies the QoS criteria for the period that you specify in Step 7. The percentage results show for day of week. Displays the percentage of the calls, for each call type, that satisfies the QoS criteria for the period that you specify in Step 7. The percentage results show for day of month.
Day of Week
Day of Month
In the Jitter field, choose the operator that you want to use and enter the value for jitter. See the QoS Parameter Operators section on page 6-2 for descriptions of operators. In the Latency field, choose the operator that you want to use and enter the value for latency. See the QoS Parameter Operators section on page 6-2 for descriptions of operators. In the Lost Packets field, choose the operator that you want to use and enter the value for number of lost packets. See the QoS Parameter Operators section on page 6-2 for descriptions of operators. In the Select Call Types area, check the check boxes for the types of calls that you want the report to include. Table 6-7 describes the call types.
Table 6-7 QoS Parameters by Call Types
Description Outgoing calls that originate on one Cisco Unified Communications Manager network, go out through a trunk, and terminate on a different Cisco Unified Communications Manager network. For CAR purposes, any outgoing call can be classified as an On Net call if it is configured as such in the CAR dial plan configuration window. See Configuring the Dial Plan section on page 3-2. Intracluster calls that originate in the Cisco Unified Communications Manager network and end in the same Cisco Unified Communications Manager network (no gateways or trunks are used). Local calls that are routed through the public switched telephone network (PSTN) to numbers without an area code or that include one of the local area codes. Long-distance calls that originate in the Cisco Unified Communications Manager network and go out through the PSTN.
Internal
Local
Long Distance
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
6-9
Table 6-7
Description International calls that originate in the Cisco Unified Communications Manager network and go out through the PSTN. Inbound calls that originate outside the Cisco Unified Communications Manager network, enter through a gateway, and go into the Cisco Unified Communications Manager network. Inbound calls that originate outside the Cisco Unified Communications Manager network, enter the Cisco Unified Communications Manager network through a gateway, and transfer outbound from the Cisco Unified Communications Manager network through a gateway. All other outgoing calls, such as toll-free numbers or emergency calls such as 911.
Incoming
Tandem
Others
Step 7 Step 8
Choose the date range for the period for which you want to see call information. If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area. Be aware that the CSV-format report is limited to 20,000 records. If you want the report in PDF format, choose PDF (portable document format) in the Report Format area. Be aware that the PDF-format report is limited to 5000 records. Click the View Report button. The report displays. If you want to mail the report, click the Send Report button. To send the report, perform the procedure that is described in the Mailing a Report section on page 5-14.
Step 9
Step 10
Additional Information
Tip
When you configure CAR to generate a traffic summary report, you can choose different call types (On Net, Internal, Local, Long Distance, and so on). CAR compares the traffic volume for every hour interval and identifies the hour with the highest traffic volume (the Busy Hour Call Completion [BHCC] number). To obtain the overall BHCC number, choose all call types when you configure CAR. Under the report title, a separate line displays the BHCC number for that day.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
6-10
OL-12483-01
Chapter 6
Only CAR administrators can generate the traffic summary by extensions report. The report provides information about the call volume for a period and set of extensions that you specify. Include only those call types and extensions that you chose.
Tip
You can use this report to track call usage by a specified group of users, by a department, or by another criteria, such as lobby phones or conference room phones. You can set up this report to generate on a weekly basis. This report helps you determine high-usage users or groups by aggregating the usage level across the users that you specify. The following sections describe how to configure traffic summary and traffic summary by extensions reports:
Configuring Traffic Summary Reports, page 6-11 Configuring Traffic Summary by Extensions Reports, page 6-14
Caution
Use CAR only during off-peak hours. Otherwise, data collection and report generation could cause performance degradation on the Cisco Unified Communications Manager system. This section describes how to generate, view, or mail summary information about system traffic.
Procedure
Step 1
Choose System Reports > Traffic> Summary. The Traffic Summary window displays. In the Generate Report field, choose a time as described in Table 6-8.
Step 2
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
6-11
Table 6-8
Description Displays the average number of calls in the system for the period that you specify in Step 4, the call types that you specify in Step 5, and the QoS values that you specify in Step 6 for hour of day. If the period that you specify in Step 4 is within one day, the system compares the traffic volume for every hour interval and identifies the hour with the highest traffic volume as the BHCC number for that day.
Day of Week
Displays the average number of calls in the system for the period that you specify in Step 4, the call types that you specify in Step 5, and the QoS values that you specify in Step 6 for day of the week. Displays the average number of calls in the system for the period that you specify in Step 4, the call types that you specify in Step 5, and the QoS values that you specify in Step 6 for day of month.
Day of Month
In the Available Reports field, choose an automatically generated report (if available) and go to Step 8 or use the default setting, Generate New Report, and go to Step 4. Choose the date range for the period for which you want to generate the report. In the Select Call Types area, check the check boxes for the types of calls that you want to include in the report. To obtain the overall BHCC number for a particular hour or 24-hour period, choose all call types. Table 6-9 describes the call types.
Table 6-9 Traffic Summary by Call Types
Description Outgoing calls that originate on one Cisco Unified Communications Manager network, go out through a trunk, and terminate on a different Cisco Unified Communications Manager network. For CAR purposes, any outgoing call can be classified as an On Net call if it is configured as such in the CAR dial plan configuration window. See Configuring the Dial Plan section on page 3-2. Intracluster calls that originate in the Cisco Unified Communications Manager network and end in the same Cisco Unified Communications Manager network (no gateways or trunks are used).
Internal
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
6-12
OL-12483-01
Chapter 6
Table 6-9
Description Local calls that route through the public switched telephone network (PSTN) to numbers without an area code or that include one of the local area codes. Long-distance calls that originate in the Cisco Unified Communications Manager network and go out through the PSTN. International calls that originate in the Cisco Unified Communications Manager network and go out through the PSTN. Inbound calls that originate outside the Cisco Unified Communications Manager network, enter through a gateway, and go into the Cisco Unified Communications Manager network. All other outgoing calls, such as toll-free numbers or emergency calls such as 911.
Long Distance
International
Incoming
Others
Note
The calls that the chart/table shows comprise an average number of calls per day. If the data that is generated is less and you have chosen a wide date range, the report shows negligible values, that are treated as 0, and the graph does not display. For example, if a Day of Week report gets generated for eight days that comprise two Mondays, the data that is shown for Monday represents the average number of calls for both the Mondays (the sum of all the calls in each Monday divided by 2). Similarly, in an Hour of Day report, the data that displays against 05-06 will be the average number of calls per day between the time 05 and 06 of the date range that was chosen for the report.
Step 6
In the Select QoS area, check the check boxes for the voice-quality categories that you want to include in the report. The parameters that are set in the Defining the Quality of Service (QoS) Values section on page 4-5 provide the basis for all voice-quality categories.
Table 6-10 QoS Detail Report Voice Quality
Description QoS for these calls represents the highest possible quality. QoS for these calls, although slightly degraded, still falls within an acceptable range. QoS for these calls, although degraded, still remains within a usable range. Poor voice quality indicates that QoS for these calls is unsatisfactory. These calls did not match any criteria for the established QoS categories.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
6-13
Step 7 Step 8
If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area. If you want the report in PDF format, choose PDF (portable document format) in the Report Format area. Click the View Report button. The report displays. If you want to mail the report, click the Send Report button. To send the report, perform the procedure that is described in the Mailing a Report section on page 5-14.
Step 9
Additional Information
Caution
Use CAR only during off-peak hours. Otherwise, data collection and report generation could cause performance degradation on the Cisco Unified Communications Manager system.
Procedure
Step 1
Choose System Reports > Traffic > Summary By Extension. The Traffic Summary that is based on Extension(s) window displays. In the Generate Report field, choose a time as described in Table 6-11.
Table 6-11 Generate Report Fields
Step 2
Description Displays the average number of calls in the system for the chosen extension numbers for the date range that was chosen for hour of day.
Note
Ensure that the date and time range does not exceed one month.
Day of Week
Displays the average calls in the system for the selected extension numbers for the date range that was chosen for day of week.
Note
Ensure that the date and time range does not exceed one month.
Day of Month
Displays the average calls in the system for the selected extension numbers for the date range that was chosen for day of month.
Note
Ensure that the date and time range does not exceed one month.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
6-14
OL-12483-01
Chapter 6
Step 3
In the Select Call Types area, check the check boxes for the types of calls that you want to include in the report. Table 6-12 describes the call types.
Table 6-12 Traffic Summary (Extn) by Call Types
Description Outgoing calls that originate on one Cisco Unified Communications Manager network, go out through a trunk, and terminate on a different Cisco Unified Communications Manager network. For CAR purposes, any outgoing call can be classified as an On Net call if it is configured as such in the CAR dial plan configuration window. See Configuring the Dial Plan section on page 3-2. Intracluster calls that originate in the Cisco Unified Communications Manager network and end in the same Cisco Unified Communications Manager network (no gateways or trunks are used). Local calls that are routed through the public switched telephone network (PSTN) to numbers without an area code or that include one of the local area codes. Long-distance calls that originate in the Cisco Unified Communications Manager network, and go out through the PSTN. International calls that originate in the Cisco Unified Communications Manager network, and go out through the PSTN. Inbound calls that originate outside the Cisco Unified Communications Manager network, enter through a gateway, and go into the Cisco Unified Communications Manager network. All other outgoing calls, such as toll-free numbers or emergency calls such as 911.
Internal
Local
Long Distance
International
Incoming
Others
Note
The calls that the chart/table shows comprise an average number of calls per day. If the data that is generated is less and you have chosen a wide date range, the report shows negligible values, that are treated as 0, and the graph does not display. For example, if a Day of Week report gets generated for eight days that comprise two Mondays, the data that is shown for Monday represents the average number of calls for both the Mondays (the sum of all the calls in each Monday divided by 2). Similarly, in an Hour of Day report, the data that displays against 05-06 will be the average number of calls per day between the time 05 and 06 of the date range that was chosen for the report.
Step 4
In the Select Extensions group box, you can either choose all extensions or search for extensions based on users.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
6-15
Note
You can enter a wildcard pattern like "!" or "X" to search on extensions. The "!" represents any n digit that has 0-9 as each of its digits, and the "X" represents a single digit in the range 0-9.
To choose all extensions, check the Select All Extensions check box. To choose extensions based on users, enter the extension number of the individual in the Extension field and click the Add Extension button. You can also use a provided search function, as described in the Searching for Users section on page 5-15.
Step 5 Step 6
If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area. If you want the report in PDF format, choose PDF (portable document format) in the Report Format area. Click the View Report button. The report displays. If you want to mail the report, click the Send Report button. To send the report, perform the procedure that is described in the Mailing a Report section on page 5-14.
Step 7
Additional Information
Configuring Client Matter Code Reports, page 6-16 Configuring Authorization Code Name Reports, page 6-17 Configuring Authorization Level Reports, page 6-18
Caution
Use CAR only during off-peak hours; otherwise, data collection and report generation could cause performance degradation on the Cisco Unified Communications Manager system.
Procedure
Step 1
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
6-16
OL-12483-01
Chapter 6
The Call Details for Client Matter Code window displays a list of all client matter codes that are configured in the system.
Step 2
In the List of Client Matter Codes box, choose the codes that you want included in the report.
Note Step 3
To add the chosen code(s) to the Selected Client Matter Codes box, click the down arrow. The report will include all codes, for which data is available, that are listed in this box. In the From Date and To Date pull-down list boxes, enter the date range of the period for which you want to see client matter code information. If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area. Be aware that the CSV-format report is limited to 20,000 records. If you want the report in PDF format, choose PDF (portable document format) in the Report Format area. Be aware that the PDF-format report is limited to 5000 records. Click View Report. The report displays. If you want to mail the report, click the Send Report button. To send the report, perform the procedure that is described in Mailing a Report section on page 5-14.
Step 4 Step 5
Step 6
Step 7
Note
For security purposes, the authorization code does not display; instead, the authorization code name (description) displays. The following procedure describes how to generate a report that shows the usage of specific authorization code names.
Caution
Use CAR only during off-peak hours; otherwise, data collection and report generation could cause performance degradation on the Cisco Unified Communications Manager system.
Procedure
Step 1
Choose System Reports > FAC/CMC > Authorization Code Name. The Call Details for Authorization Code Name window displays a list of all authorization code names that are configured in the system.
Step 2
In the List of Authorization Code Names box, choose the code names that you want included in the report.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
6-17
Note Step 3
To add the chosen code name(s) to the Selected Authorization Code Names box, click the down arrow. The report will include all code names, for which data is available, that are listed in this box. In the From Date and To Date drop-down list boxes, enter the date range of the period for which you want to see authorization code name information. If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area. Be aware that the CSV-format report is limited to 20,000 records. If you want the report in PDF format, choose PDF (portable document format) in the Report Format area. Be aware that the PDF-format report is limited to 5000 records. Click View Report. The report displays. If you want to mail the report, click the Send Report button. To send the report, perform the procedure that is described in Mailing a Report section on page 5-14.
Step 4 Step 5
Step 6
Step 7
Additional Information
Caution
Use CAR only during off-peak hours; otherwise, data collection and report generation could cause performance degradation on the Cisco Unified Communications Manager system.
Procedure
Step 1
Choose System Reports > FAC/CMC > Authorization Level. The Call Details by Authorization Level window displays a list of all authorization levels that are configured in the system.
Step 2 Step 3
In the List of Authorization Levels box, choose the levels that you want included in the report. To add the chosen level(s) to the Selected Authorization Levels box, click the down arrow. The report will include all levels, for which data is available, that are listed in this box.
Note
Only FAC authorization levels reports that are associated with Route Patterns will get generated.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
6-18
OL-12483-01
Chapter 6
Step 4 Step 5
In the From Date and To Date drop-down list boxes, enter the date range of the period for which you want to see authorization level information. If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area. Be aware that the CSV-format report is limited to 20,000 records. If you want the report in PDF format, choose PDF (portable document format) in the Report Format area. Be aware that the PDF-format report is limited to 5000 records. Click View Report. The report displays. If you want to mail the report, click the Send Report button. To send the report, perform the procedure that is described in the Mailing a Report section on page 5-14.
Additional Information
Step 6
Step 7
Caution
Use CAR only during off-peak hours. Otherwise, data collection and report generation could cause performance degradation on the Cisco Unified Communications Manager system.
Procedure
Step 1
Choose System Reports > Malicious Call Details. The Malicious Call Details window displays. In the From Date drop-down list boxes, choose the month, day, and year from which you want malicious call details. In the To Date drop-down list boxes, choose the month, day, and year to which you want malicious call details. If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area. Be aware that the CSV-format report is limited to 20,000 records. If you want the report in PDF format, choose PDF (portable document format) in the Report Format area. Be aware that the PDF-format report is limited to 5000 records. To view the report, click View Report. The report displays. To mail the report to an e-mail recipient, see the Mailing a Report section on page 5-14.
Step 5
Step 6
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
6-19
Additional Information
Caution
Use CAR only during off-peak hours. Otherwise, data collection and report generation could cause performance degradation on the Cisco Unified Communications Manager system.
Procedure
Step 1
Choose System Reports > Precedence Call Summary. The Call Summary by Precedence window displays. In the Generate Reports field, choose a time as described in Table 6-13.
Table 6-13 Generate Report Fields
Step 2
Description Displays the average number of calls in the system for the chosen extension numbers for the date range that was chosen for hour of day.
Note
Ensure that the date and time range does not exceed one month.
Day of Week
Displays the average number of calls in the system for the chosen extension numbers for the date range that was chosen for day of week.
Note
Ensure that the date and time range does not exceed one month.
Day of Month
Displays the average number of calls in the system for the chosen extension numbers for the date range that was chosen for day of month.
Note
Ensure that the date and time range does not exceed one month.
Step 3
In the Select Precedence Levels field, check a precedence level that you want in the report or click Select All to check all precedence levels.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
6-20
OL-12483-01
Chapter 6
Table 6-14
Description Highest precedence setting for MLPP calls. Second highest precedence setting for MLPP calls. Third highest precedence setting for MLPP calls. Forth highest precedence setting for MLPP calls. Lowest precedence setting for MLPP calls.
In the From Date drop-down list boxes, choose the month, day, and year from which you want precedence summary information. In the To Date drop-down list boxes, choose the month, day, and year for which you want precedence summary information. If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area. If you want the report in PDF format, choose PDF (portable document format) in the Report Format area. To view the report, click View Report. The report displays. To mail the report to an e-mail recipient, see the Mailing a Report section on page 5-14.
Step 8
Additional Information
Caution
Use CAR only during off-peak hours. Otherwise, data collection and report generation could cause performance degradation on the Cisco Unified Communications Manager system. This section describes how to generate, view, or mail summary information about the Cisco Unified Communications Manager system.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
6-21
Procedure
Step 1
Choose System Reports > System Overview. The System Overview window displays. In the Available Reports field, choose an automatically generated report (if available) and go to Step 6, or use the default setting, Generate New Report, and go to Step 3. Choose the date range for the period for which you want to generate the report. From the List of Reports, choose the reports that you want generated by highlighting the report and clicking the right arrow. The reports that you chose appear in the Selected Reports list box.
Tip
You can highlight more than one report at a time by pressing the Ctrl key on your keyboard while clicking the reports.
Step 5
If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area. Be aware that the CSV-format report is limited to 20,000 records. If you want the report in PDF format, choose PDF (portable document format) in the Report Format area. Be aware that the PDF-format report is limited to 5000 records. Click the View Report button. The report displays. If you want to mail the report, click the Send Report button. To send the report, perform the procedure that is described in Mailing a Report, page 5-14.
Step 6
Step 7
Additional Information
Caution
Use CAR only during off-peak hours. Otherwise, data collection and report generation could cause performance degradation on the Cisco Unified Communications Manager system.
Procedure
Step 1
Choose System Reports > CDR Error. The CDR Error window displays. Choose the date range of the period for which you want to generate the report.
Step 2
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
6-22
OL-12483-01
Chapter 6
Step 3 Step 4
If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area. If you want the report in PDF format, choose PDF (portable document format) in the Report Format area. Click the View Report button. The report displays. If you want to mail the report, click the Send Report button. To send the report, perform the procedure that is described in the Mailing a Report section on page 5-14.
Step 5
Additional Information
Related Topics
CDR Error Report Results, page 11-32 System Overview Report Results, page 11-31 Enabling or Customizing Reports for Automatic Generation, page 4-7 Precedence Call Summary Report Results, page 11-29 CDR Analysis and Reporting Overview, page 1-1 Traffic Summary Report Results, page 11-22 Configuring Traffic Summary Reports, page 6-11 Configuring Traffic Summary by Extensions Reports, page 6-14 QoS by Call Types Report Results, page 11-20 QoS by Gateway Report Configuration, page 6-6 QoS by Gateways Report Results, page 11-19 QoS by Call Types Report Configuration, page 6-8 QoS Detail Report Configuration, page 6-2 QoS Summary Report Results, page 11-18 Defining the Quality of Service (QoS) Values, page 4-5 QoS Detail Report Results, page 11-16 QoS Summary Report Configuration, page 6-4
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
6-23
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
6-24
OL-12483-01
CH A P T E R
Configuring Gateway Reports, page 7-1 Configuring Route Plan Reports, page 7-8 Configuring Conference Bridge Reports, page 7-13 Configuring Voice Messaging Utilization Reports, page 7-16 Related Topics, page 7-18
Gateway Detail Report Configuration, page 7-1 Gateway Summary Report Configuration, page 7-4 Gateway Utilization Report Configuration, page 7-6
Caution
Use CAR only during off-peak hours. Otherwise, data collection and report generation could cause performance degradation on the Cisco Unified Communications Manager system.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
7-1
Procedure
Step 1
Choose Device Reports > Gateway > Detail. The Gateway Detail window displays. To display the list of gateways in the List of Gateways box that you can include in the report, perform one of the following tasks:
Step 2
To display all gateways in the List of Gateways box, click Gateway Types in the column on the left side of the window. To display gateways for a particular gateway type in the List of Gateways box, click the icon next to Gateway Types in the column on the left side of the window. The tree structure expands, and a list of gateway types displays. Choose a gateway type from the list, and the gateway name displays in the List of Gateways box.
Note
The List of Gateways box will list up to 200 gateways that are configured for the chosen gateway type. To display all gateways that are associated with configured route patterns/hunt pilots, click the Route/Patterns/Hunt Pilots in the column on the left side of the window. To display gateways that use a particular route pattern, rather than a gateway type, click the icon next to Route Patterns/Hunt Pilots in the column on the left side of the window. The tree structure expands and displays a list of route patterns/hunt lists. Choose a route pattern/hunt pilot from the list, and the gateway name displays in the List of Gateways box.
Note
You can also search for specific route patterns/hunt lists by entering part of the name of the route pattern(s)/hunt list(s) in the Route Patterns/Hunt Pilots box in the column on the left side of the window. CAR searches for the route pattern(s)/hunt list(s) that matches the search string.
Step 3
In the List of Gateways box, choose the gateways that you want to include in the report.
Note Step 4
To move the chosen gateway to the list of Selected Gateways box, click the down arrow. The gateway(s) that you chose displays in the Selected Gateways box. In the Select Call Types area, check the check boxes for the types of calls that you want to include in the report. Table 7-1 describes the call types.
Step 5
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
7-2
OL-12483-01
Chapter 7
Table 7-1
Description Outgoing calls that originate on one Cisco Unified Communications Manager network, go out through a trunk, and terminate on a different Cisco Unified Communications Manager network. For CAR purposes, any outgoing call can be classified as an On Net call if it is configured as such in the CAR dial plan configuration window. See Configuring the Dial Plan section on page 3-2. Local calls that are routed through the public switched telephone network (PSTN) to numbers without an area code or that include one of the local area codes. Long-distance calls that originate in the Cisco Unified Communications Manager network, and go out through the PSTN. International calls that originate in the Cisco Unified Communications Manager network, and go out through the PSTN. Inbound calls that originate outside the Cisco Unified Communications Manager network, enter through a gateway, and go into the Cisco Unified Communications Manager network. Inbound calls that originate outside the Cisco Unified Communications Manager network, enter the Cisco Unified Communications Manager network through a gateway, and transfer outbound from the Cisco Unified Communications Manager network through a gateway. All other outgoing calls, such as toll-free numbers or emergency calls such as 911.
Local
Long Distance
International
Incoming
Tandem
Others
Step 6
In the Select QoS area, check the check boxes for the voice-quality categories that you want to include in the report. The parameters that are set in the Defining the Quality of Service (QoS) Values section on page 4-5 provide the basis for all voice-quality categories.
Table 7-2 Gateway Detail Voice Quality
Description QoS for these calls represents the highest possible quality. QoS for these calls, although slightly degraded, still falls within an acceptable range. QoS for these calls represents degraded quality but still within a usable range.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
7-3
Table 7-2
Description QoS for these calls represents unsatisfactory quality. These calls did not match any criteria for the established QoS categories.
Step 7
Choose the date range for the period for which you want to see call information.
Note Step 8
Ensure the date and time range does not exceed one month.
If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area. Be aware that the CSV-format report is limited to 20,000 records. If you want the report in PDF format, choose PDF (portable document format) in the Report Format area. Be aware that the PDF-format report is limited to 5000 records. Click the View Report button. The report displays. If you want to mail the report, click the Send Report button. To send the report, follow the procedure that is described in the Mailing a Report section on page 5-14.
Step 9
Step 10
Additional Information
Caution
Use CAR only during off-peak hours. Otherwise, data collection and report generation could cause performance degradation on the Cisco Unified Communications Manager system. This section describes how to generate, view, or mail summary information about gateways.
Procedure
Step 1
Choose Device Reports > Gateway > Summary. The Gateway Summary window displays.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
7-4
OL-12483-01
Chapter 7
Step 2 Step 3
In the Available Reports field, choose an automatically generated report (if available) and go to Step 6, or use the default setting, Generate New Report, and go to Step 3. In the Select Call Types area, check the check boxes for the types of calls that you want to include in the report. Table 7-3 describes the call types.
Tip
To check all check boxes, click Select All; to uncheck the check boxes, click Clear All.
Gateway Summary by Call Types
Table 7-3
Description Outgoing calls that originate on one Cisco Unified Communications Manager network, go out through a trunk, and terminate on a different Cisco Unified Communications Manager network. For CAR purposes, any outgoing call can be classified as an On Net call if it is configured as such in the CAR dial plan configuration window. See Configuring the Dial Plan section on page 3-2. Intracluster calls that originate in the Cisco Unified Communications Manager network and end in the same Cisco Unified Communications Manager network (no gateways or trunks are used). Local calls that are routed through the public switched telephone network (PSTN) to numbers without an area code or that include one of the local area codes. Long-distance calls that originate in the Cisco Unified Communications Manager network, and go out through the PSTN. International calls that originate in the Cisco Unified Communications Manager network, and go out through the PSTN. Inbound calls that originate outside the Cisco Unified Communications Manager network, enter through a gateway, and go into the Cisco Unified Communications Manager network. Inbound calls that originate outside the Cisco Unified Communications Manager network, enter the Cisco Unified Communications Manager network through a gateway, and transfer outbound from the Cisco Unified Communications Manager network through a gateway. All other outgoing calls, such as toll-free numbers or emergency calls such as 911.
Internal
Local
Long Distance
International
Incoming
Tandem
Others
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
7-5
Step 4 Step 5
If you chose Generate New Report, choose the date range of the period for which you want to generate the report. If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area. Be aware that the CSV-format report is limited to 20,000 records. If you want the report in PDF format, choose PDF (portable document format) in the Report Format area. Be aware that the PDF-format report is limited to 5000 records. Click the View Report button. The report displays. If you want to mail the report, click the Send Report button. To send the report, perform the procedure that is described in the Mailing a Report section on page 5-14.
Step 6
Step 7
Additional Information
Caution
Use CAR only during off-peak hours. Otherwise, data collection and report generation could cause performance degradation on the Cisco Unified Communications Manager system. This section describes how to generate, view, or mail Gateway Utilization reports.
Procedure
Step 1
Choose Device Reports > Gateway > Utilization. The Gateway Utilization window displays. In the Generate Reports field, choose a time as described in Table 7-4.
Step 2
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
7-6
OL-12483-01
Chapter 7
Table 7-4
Description Displays the utilization for each hour in a 24-hour period for the period that you specify in Step 8. Displays the utilization for the days of the week that occur within the period that you specify in Step 8. Displays the utilization for the days of the month that occur within the period that you specify in Step 8.
Day of Month
Step 3 Step 4
In the Available Reports field, choose an automatically generated report (if available) and go to Step 10, or use the default Generate New Report and go to Step 4. To display the list of gateways that you can include in the report in the List of Gateways box, perform one of the following tasks:
To display all gateways in the List of Gateways box, click Gateway Types in the column on the left side of the window. To display gateways for a particular gateway type in the List of Gateways box, click the icon next to Gateway Types in the column on the left side of the window. The tree structure expands and a list of gateway types displays. Choose a gateway type from the list, and the gateway name displays in the List of Gateways box.
Note
The List of Gateways box will list up to 200 gateways that are configured for the chosen gateway type. To display all gateways that are associated with configured route patterns/hunt pilots, click the Route Patterns/Hunt Pilots in the column on the left side of the window. To display gateways that use a particular route pattern, rather than a gateway type, click the icon next to Route Patterns/Hunt Pilots in the column on the left side of the window. The tree structure expands and displays a list of route patterns/hunt lists. Choose a route pattern/hunt pilot from the list, and the gateway name displays in the List of Gateways box.
Note
You can also search for specific route patterns/hunt lists by entering part of the name of the route pattern(s)/hunt list(s) in the Route Patterns/Hunt Pilots box in the column on the left side of the window. CAR searches for the route pattern(s)/hunt list(s) that matches the search string.
Step 5
Choose a gateway type from the list. The gateway name displays in the List of Gateways box.
Note
The List of Gateways box will display up to 200 gateways that are configured for the chosen gateway type.
Step 6
In the List of Gateways box, choose the gateways that you want to include in the report.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
7-7
Note Step 7
Click the down arrow to move the chosen gateway to the list of Selected Gateways box. The gateway(s) that you chose displays in the Selected Gateways box. If you chose Generate New Report, enter the date range of the period for which you want to see call information.
Step 8
Ensure the date and time range does not exceed one month.
If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area. If you want the report in PDF format, choose PDF (portable document format) in the Report Format area. Click the View Report button. The report displays. If you want to mail the report, click the Send Report button. To send the report, perform the procedure that is described in the Mailing a Report section on page 5-14.
Step 11
Additional Information
Route and Line Group Utilization Reports Configuration, page 7-8 Route/Hunt List Utilization Report Configuration, page 7-10 Route Pattern/Hunt Pilot Utilization Report Configuration, page 7-12
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
7-8
OL-12483-01
Chapter 7
Caution
Use CAR only during off-peak hours. Otherwise, data collection and report generation could cause performance degradation on the Cisco Unified Communications Manager system. This section describes how to generate, view, or mail Route and Line Group Utilization reports.
Procedure
Step 1
Choose Device Reports > Route Plan > Route and Line Group Utilization. The Route and Line Group Utilization window displays. In the Generate Reports field, choose a time as described in Table 7-5.
Table 7-5 Generate Report Fields
Step 2
Description Displays the cumulative utilization for each hour in a 24-hour period for the period that you specify in Step 8. Displays the cumulative utilization for the days of the week that occur within the period that you specify in Step 8. Displays the cumulative utilization for the days of the month that occur within the period that you specify in Step 8.
Day of Week
Day of Month
Step 3 Step 4
In the Available Reports field, choose an automatically generated report (if available) and go to Step 10, or use the default setting, Generate New Report, and go to Step 4. To choose only those route and line groups that use a particular route pattern, click Route Patterns/Hunt Pilots in the column on the left side of the window. The tree structure expands and displays the route patterns/hunt lists that you chose.
Note
You can also search for specific route patterns/hunt lists by entering part of the name of the route pattern(s)/hunt list(s) in the Route Patterns/Hunt Pilots box in the column on the left side of the window. CAR searches for the route pattern(s)/hunt list(s) that matches the search string.
Step 5
Choose a route pattern/hunt list from the list. The route and line groups for this route pattern/hunt list display in the List of Route/Line Groups box.
Note Step 6
The List of Route/Line Groups box will display up to 200 route groups.
In the List of Route/Line Groups box, choose the route/line groups that you want to include in the report.
Note Step 7
To move the chosen gateway to the list of Selected Route/Line Groups box, click the down arrow.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
7-9
The route/line groups that you chose display in the Selected Route Groups box.
Step 8
If you chose Generate New Report, enter the date range of the period for which you want to see call information.
Ensure the date and time range does not exceed one month.
If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area. If you want the report in PDF format, choose PDF (portable document format) in the Report Format area. Click the View Report button. The report displays. If you want to mail the report, click the Send Report button. To send the report, follow the procedure that is described in the Mailing a Report section on page 5-14.
Step 11
Additional Information
Caution
Use CAR only during off-peak hours. Otherwise, data collection and report generation could cause performance degradation on the Cisco Unified Communications Manager system. This section describes how to generate, view, or mail route/hunt list utilization reports.
Procedure
Step 1
Choose Device Reports > Route Plan > Route/Hunt List Utilization. The Route/Hunt List Utilization window displays. In the Generate Report field, choose a time as described in Table 7-6.
Step 2
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
7-10
OL-12483-01
Chapter 7
Table 7-6
Description Displays the cumulative utilization for each hour in a 24-hour period for the period that you specify in Step 8. Displays the cumulative utilization for the days of the week that occur within the period that you specify in Step 8. Displays the cumulative utilization for the days of the month that occur within the period that you specify in Step 8.
Day of Week
Day of Month
Step 3 Step 4
In the Available Reports field, choose an automatically generated report (if available) and go to Step 10, or use the default setting, Generate New Report, and go to Step 4. To choose the route/hunt lists that you want to include in the report, click Route Patterns/Hunt Pilots in the column on the left side of the window. The tree structure expands and displays the route patterns/hunt pilots that you chose.
Note
You can also search for specific route patterns/hunt lists by entering part of the name of the route pattern(s)/hunt lists in the Route Patterns/Hunt Pilots box in the column on the left side of the window. CAR searches for the route pattern(s)/hunt list(s) that matches the search string.
Step 5
Choose a route/hunt list from the list. The route/hunt list name displays in the List of Route/Hunt Lists box.
Note Step 6
The List of Route/Hunt Lists box will display up to 200 route/hunt lists.
In the List of Route/Hunt Lists box, choose the route/hunt lists that you want to include in the report.
Note Step 7
To move the chosen route/hunt lists to the list of Selected Route/Hunt Lists box, click the down arrow. The route/hunt lists that you chose display in the Selected Route/Hunt Lists box. If you chose Generate New Report, enter the date range of the period for which you want to see call information.
Step 8
Ensure the date and time range does not exceed one month.
If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area. If you want the report in PDF format, choose PDF (portable document format) in the Report Format area. Click the View Report button. The report displays.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
7-11
Step 11
If you want to mail the report, click the Send Report button. To send the report, perform the procedure that is described in the Mailing a Report section on page 5-14.
Additional Information
Caution
Use CAR only during off-peak hours. Otherwise, data collection and report generation could cause performance degradation on the Cisco Unified Communications Manager system. This section describes how to generate, view, or mail Route Pattern/Hunt Pilot Utilization reports.
Procedure
Step 1
Choose Device Reports > Route Plan > Route Pattern/Hunt Pilot Utilization. The Route Pattern/Hunt Pilot Utilization window displays. In the Generate Report field, choose a time as described in Table 7-7.
Table 7-7 Generate Report Fields
Step 2
Description Displays the cumulative utilization for each hour in a 24-hour period for the period that you specify in Step 8. Displays the cumulative utilization for the days of the week that occur within the period that you specify in Step 8. Displays the cumulative utilization for the days of the month that occur within the period that you specify in Step 8.
Day of Week
Day of Month
Step 3
In the Available Reports field, choose an automatically generated report (if available) and go to Step 10, or use the default Generate New Report and go to Step 4.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
7-12
OL-12483-01
Chapter 7
Step 4
To choose the route pattern(s)/hunt list(s) that you want to include in the report, click Route Patterns/Hunt Pilots in the column on the left side of the window. The tree structure expands and displays the route pattern(s)/hunt list(s) that you chose.
Note
You can also search for specific route patterns/hunt lists by entering part of the name of the route pattern(s)/hunt list(s) in the Route Patterns box in the column on the left side of the window. CAR searches for the route pattern(s)/hunt list(s) that matches the search string.
Step 5
Choose a route pattern/hunt pilot from the list. The route pattern/hunt pilot name displays in the List of Route Patterns/Hunt Pilots box.
Note Step 6
The List of Route Patterns/Hunt Pilots box will display up to 200 route patterns/hunt lists.
In the List of Route Patterns/Hunt Pilots box, choose the route patterns/hunt lists that you want to include in the report.
Note Step 7
You can generate a report for up to five route patterns/hunt pilots at a time.
Click the down arrow to move the chosen route pattern/hunt pilot to the list of Selected Route Patterns/Hunt Pilots box. The route pattern/hunt pilot that you chose displays in the Selected Route Patterns/Hunt Pilots box. If you chose Generate New Report, enter the date range of the period for which you want to see call information.
Step 8
Ensure the date and time range does not exceed one month.
If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area. If you want the report in PDF format, choose PDF (portable document format) in the Report Format area. Click the View Report button. The report displays. If you want to mail the report, click the Send Report button. To send the report, perform the procedure that is described in the Mailing a Report section on page 5-14.
Step 11
Additional Information
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
7-13
Caution
Use CAR only during off-peak hours. Otherwise, data collection and report generation could cause performance degradation on the Cisco Unified Communications Manager system. This section describes how to generate, view, or mail a Conference Call Details report.
Procedure
Step 1
Choose Device Reports > Conference Bridge > Call Details. The Conference Call Details window displays. In the Report Type pull-down menu, choose either Summary or Detail. In the Available Reports field, choose an automatically generated report (if available) and go to Step 7 or use the default setting, Generate New Report, and go to Step 4. In Select Conference Types, check the check box of the conference type that you want to include in the report as described in Table 7-8.
Table 7-8 Conference Calls Detail Fields
Parameter Ad-Hoc
Description Ad hoc conferences allow the conference controller to let only certain participants into the conference. Meet-me conferences allow users to dial in to a conference.
Meet-Me
Step 5
If you chose Generate New Report, enter the date range of the period for which you want to see conference call details.
Note Step 6
Ensure the date and time range does not exceed one month.
If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area. Be aware that the CSV-format report is limited to 20,000 records. If you want the report in PDF format, choose PDF (portable document format) in the Report Format area. Be aware that the PDF-format report is limited to 5000 records. Click the View Report button. The report displays.
Step 7
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
7-14
OL-12483-01
Chapter 7
Step 8
If you want to mail the report, click the Send Report button. To send the report, perform the procedure that is described in the Mailing a Report section on page 5-14.
Additional Information
Caution
Use CAR only during off-peak hours. Otherwise, data collection and report generation could cause performance degradation on the Cisco Unified Communications Manager system. This section describes how to generate, view, or mail Conference Bridge Utilization reports for each conference bridge type.
Procedure
Step 1
Choose Device Reports > Conference Bridge > Utilization. The Conference Bridge Utilization window displays. In the Generate Report field, choose a time as described in Table 7-9.
Table 7-9 Generate Report Fields
Step 2
Description Displays the cumulative utilization for each hour in a 24-hour period for the period that you specify in Step 6. Displays the cumulative utilization for the days of the week that occur within the period that you specify in Step 6. Displays the cumulative utilization for the days of the month that occur within the period that you specify in Step 6.
Day of Week
Day of Month
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
7-15
Step 3 Step 4
In the Available Reports field, choose an automatically generated report (if available) and go to Step 8 or use the default Generate New Report and go to Step 4. From the Conference Bridge Types column in the left pane, choose the conference bridge type(s) that you want to include in the utilization report. The conference bridges of the particular conference bridge type that you chose display in the List of Devices box.
When you have chosen all the conference bridges that you want to include in the report, click the down arrow to add them to the Selected Devices box. If you chose Generate New Report, enter the date range of the period for which you want to see call information.
Ensure the date and time range does not exceed one month.
If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area. If you want the report in PDF format, choose PDF (portable document format) in the Report Format area. Click the View Report button. The report displays. If you want to mail the report, click the Send Report button. To send the report, perform the procedure described in the Mailing a Report section on page 5-14.
Step 9
Additional Information
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
7-16
OL-12483-01
Chapter 7
You can automatically generate the Voice Messaging Utilization report for Voice Messaging DNs, or you can generate it as a new report. Only CAR administrators can schedule reports for automatic generation. See the Configuring CAR System Scheduler section on page 3-6 for more information.
Note
The CAR Voice Messaging Utilization report supports the Cisco Unity and Cisco Unity Connection voice-messaging systems.
Caution
Use CAR only during off-peak hours. Otherwise, data collection and report generation could cause performance degradation on the Cisco Unified Communications Manager system. This section describes how to generate, mail, or view Voice Messaging Utilization reports.
Procedure
Step 1
Choose Device Reports > Voice Messaging > Utilization. The Voice Messaging Utilization window displays. In the Generate Report field, choose a time as described in Table 7-10.
Table 7-10 Generate Report Fields
Step 2
Description Displays the utilization results for each hour in a 24-hour period for the period that you specify in Step 10. Displays the utilization for the days of the week that occur within the period that you specify in Step 10. Displays the utilization for the days of the month that occur within the period that you specify in Step 10.
Day of Week
Day of Month
Step 3 Step 4
In the Available Reports field, choose an automatically generated report (if available) and go to Step 12, or use the default setting, Generate New Report, and go to Step 4. To choose a voice-messaging DN, click Voice Messaging DNs in the left pane. The previously configured voice-messaging DN displays.
Note
The Voice Messaging DN that displays in this window represents the Voice Messaging DN that you configure in the VoiceMailDn service parameter, which supports the Cisco Messaging Interface service. Set the parameter name VoiceMailDn to the routing pattern that you have created on the machine. Configure this by opening Cisco Unified Communications Manager Administration and clicking on System. Click Service Parameters; then, select the service Cisco Messaging Interface.
Step 5
Choose the voice messaging DN. The DN that you chose displays in the List of DNs/Ports list box.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
7-17
Step 6
To choose a voice messaging port, click Voice Messaging Ports in the left pane. A list of configured voice messaging ports displays. From the list of ports, choose a voice messaging port. The port that you chose displays in the List of DNs/Ports list box. In Select Voice Messaging DNs/Ports, click the down arrow. The port that you chose displays in the Selected DNs/Ports list box. Repeat Step 7 and Step 8 until you have chosen the ports that you want to include in the report.
Step 7
Step 8
Step 9
Note
For this report, you can choose a maximum of five Voice Messaging Ports/Voice Messaging DNs. You can choose the default Voice Messaging DN and four Voice Messaging Ports, or you can choose five Voice Messaging Ports.
Step 10
If you chose Generate New Report, enter the date range of the period for which you want to see call information.
Ensure the date and time range does not exceed one month.
If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area. If you want the report in PDF format, choose PDF (portable document format) in the Report Format area. Click the View Report button. The report displays. If you want to mail the report, click the Send Report button. To send the report, perform the procedure described in the Mailing a Report section on page 5-14.
Step 13
Additional Information
Related Topics
Voice Messaging Utilization Report Results, page 11-46 Conference Bridge Utilization Report Results, page 11-44 Conference Call Detail Report Results, page 11-42 Gateway and Route Utilization Report Results, page 11-38 Gateway Detail Report Results, page 11-33
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
7-18
OL-12483-01
CH A P T E R
Configuring CDR Search by User Extension, page 8-1 Configuring CDR Search by Gateway, page 8-3 Configuring CDR Search by Cause for Call Termination, page 8-4 Viewing Call Termination Details, page 8-5 Configuring CDR Search By Call Precedence Levels, page 8-6 Configuring CDR Search for Malicious Calls, page 8-7 Related Topics, page 8-8
Make sure that you set the Cisco Unified Communications Manager service parameters CDR Enabled Flag and Call Diagnostics Enabled to true (enabled), so the system can generate CDR/CMR data. By default, the system disables these service parameters. For more information about these service parameters, see the Configuring CDR Service Parameters section on page 2-2. All CAR reports use CDR data. Be sure to have the most current CDR data from which your reports are built. By default, CDR data loads daily from midnight to 5 a.m. However, you can set the loading time, interval, and duration as needed. See the Configuring CAR System Scheduler section on page 3-6 for more information.
Note
After you log in to the CAR main window, the following warning may display if Cisco Unified Communications Manager is also activated: Warning: In some servers in this cluster the CDR Enabled Flag is false and so CDR entries may not be generated for all the calls made in this cluster.Some clusters have multiple nodes where some of the nodes do not run Cisco Unified Communications Manager services. This warning checks all nodes in the cluster regardless of Cisco Unified Communications Manager service activation status. Ignore the warning after manually checking the CDR Enabled Flag parameter settings for all the Cisco Unified Communications Manager service subscribers.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
8-1
This section describes how to show the details of CDR data based on a user or extension. You can search CDR data by user or directory number (calling, original called, or final called) to analyze call details for the oldest 100 records that satisfy the search criteria. If more than 100 records are returned, the system truncates the results. You can search for calls by using specific numbers for the period that you specify, which helps you trace calls that are placed from or to any specific numbers for diagnostic or informational purposes. All associated records, such as transfer, mobility, silent monitoring and recording, and conference calls, appear together as a logical group.
Caution
Use CAR only during off-peak hours. Otherwise, data collection and report generation could cause performance degradation on the Cisco Unified Communications Manager system.
Procedure
Step 1
Choose CDR > Search > By User Extension. The CDR Search by User Extension window displays.
Note
You can enter a wildcard pattern like ! or X to search on extensions. The ! represents any n digit that has 0-9 as each of its digits, and the X represents a single digit in the range 0-9.
Step 2
To search CDRs based on extensions, enter the extension number in the Extension field and click the Add Extension button. To search CDRs based on user, click the Search Extension(s) based on User(s) link, enter the first few letters of the first and/or last name in the First Name and/or Last Name fields, and click the Search button. When the results display, click the Select link next to the result that you want to include. Click the Close button.
Note
To delete an item from the Report Criteria box, click the Remove Extension(s) button. You can delete all items from the Report Criteria box by clicking the Remove All Extensions button.
Step 3 Step 4
Choose the date and time range of the period for which you want to see CDR data for the specified user or extension.When you configure the time range, use Coordinated Universal Time (UTC). Choose whether to run the CDR Search report with grouping or without grouping. If you chose with grouping, check the check box beside With Grouping. The default is specified without grouping
Note
With Grouping choice means that the system returns CDR records that match the date and time range for the search are returned and groups them with their associated records. Without Grouping returns all the CDR records that match the date and time range without grouping all the associated records for each call together.
Step 5
Click the OK button. The CDR-CMR Search Results window displays. The system only displays the oldest 100 records that fall into the date range that you configured in Step 3.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
8-2
OL-12483-01
Chapter 8
Step 6 Step 7
To view the CMR data, click the Others button. To view both the CDR and CMR data fields, click the View button. To mail the report to e-mail recipient(s), follow the steps in the Mailing a Report section on page 5-14.
Additional Information
Caution
Use CAR only during off-peak hours. Otherwise, data collection and report generation could cause performance degradation on the Cisco Unified Communications Manager system.
Procedure
Step 1
Choose CDR > Search > By Gateway. The CDR Search by Gateway window displays. Perform one of the following tasks:
Step 2
To display all the gateways that are configured in the system, click Gateway Types in the column on the left side of the window. To expand the tree structure and display the type of gateway from which you can choose, click the icon next to Gateway types. To choose a gateway that uses a particular route pattern/hunt pilot, rather than a gateway type, click Route Patterns/Hunt Pilots in the column on the left side of the window. The gateways that are associated to the configured Route Patterns/Hunt Pilots display. To expand the tree structure and display route pattern/hunt pilot for you to choose, click the icon next to Route Patterns/Hunt Pilots.
Note
You can also search for specific route patterns/hunt lists by entering part of the name of the route pattern(s)/hunt pilot(s) in the Route Patterns/Hunt Pilots box in the column on the left side of the window. CAR searches for the route pattern(s)/hunt list(s) that matches the search string.
Step 3
Choose a gateway type from the list. The gateway name displays in the List of Gateways box.
Note
The List of Gateways box will display up to 200 gateways that are configured for the chosen gateway type.
Step 4
In the List of Gateways box, choose the gateways that you want to include in the report.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
8-3
Note
You can generate a report for up to 15 gateways at a time. If you choose more than 15 gateways, you will receive a message that states Select 15 or fewer gateways to generate new report.
Step 5
To move the chosen gateway to the list of Selected Gateways box, click the down arrow. The gateway that you chose displays in the Selected Gateways box. Choose the date and time range of the period during which you want to search CDR data. When you configure the time range, use UTC. Choose whether to run the CDR Search report with grouping or without grouping. If you chose with grouping, check the check box beside With Grouping. The default specifies Without Grouping
Step 6 Step 7
Note
With Grouping means that the system returns CDR records that match the date and time range for the search are returned and grouped with their associated records. Without Grouping returns all the CDR records that match the date and time range without grouping all the associated records for each call together.
Step 8
Click the OK button. The CDR-CMR Results window displays. The system only displays the oldest 100 records that fall into the date and time range that you configured in Step 6. If more than 100 records are returned, the system truncates the results.
Step 9 Step 10
To view the CMR data, click the Others button. To view both the CDR and CMR data fields, click the View button. To mail the report to e-mail recipient(s), follow the steps in the Mailing a Report section on page 5-14.
Additional Information
Choose CDR > Search > By Cause for Call Termination. The Cause for Call Termination window displays. To search for the cause(s) of the termination of a call, highlight the cause(s) in the list of call termination causes.
Step 2
Tip
You can select more than one cause by clicking the causes that you want while holding down the Ctrl key on your keyboard. You can also select all causes in the list by holding down the Shift key while clicking all causes.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
8-4
OL-12483-01
Chapter 8
Step 3
With the desired cause(s) highlighted, click the down arrow above the Selected Call Termination Causes box. The cause(s) that you chose displays in the Selected Call Termination Causes list box.
Note
To view a complete list of Call Termination Causes, see the Call Termination Cause Codes section on page 10-110
Step 4 Step 5
Choose the date and time range of the period during which you want to search CDR data. When you configure the time range, use UTC. Choose whether to run the CDR Search report with grouping or without grouping. If you chose with grouping, check the box beside With Grouping. The default specifies Without Grouping
Note
With Grouping means that the system returns CDR records that match the date and time range for the search and groups them with their associated records. Without Grouping returns all the CDR records that match the date and time range without grouping all the associated records for each call together.
Step 6
Click OK. The Call Termination Details window displays the report criteria for which the report was generated, along with the total number of calls that were placed during the given time range as well as how many call legs and the percentage of call legs for each cause code that is selected. The system displays only the oldest 100 records that fall into the date and time ranges that you configured in Step 4. If more than 100 records are returned, the system truncates the results.
Step 7
To view CDRs, see the Viewing Call Termination Details section on page 8-5.
Additional Information
Follow the steps in the Configuring CDR Search by Cause for Call Termination section on page 8-4 to display the Call Termination Details window.
Procedure
Step 1 Step 2
In the Select CDRs field, check the check box beside the individual CDRs that you want to view or, if you want to view all CDRs in the list, check the Select CDRs check box. After you have chosen the CDRs that you want to view, click View CDRs. The CDR-CMR Search Results window displays.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
8-5
To view the media information and the CDR-CMR dump records, click the Others and View links. See the Understanding the CDR Search Results section on page 11-48 for information on how to read CDR search results reports.
Step 3 Step 4
To print information that displays on the window, click the Edit button in your browser. Right-click the Select All button to highlight the section of the report that you want to print. Click the Print button. To mail the report in an e-mail, click Send Report and follow the procedure that is described in the Mailing a Report section on page 5-14.
Additional Information
Choose CDR > Search > By Call Precedence Level. The CDR Search by Precedence Levels window displays. In Select Precedence Levels, check the check box(es) for the call precedence level(s) on which you want to search as described in Table 8-1.
Table 8-1 Call Precedence Levels
Step 2
Description Highest precedence setting for MLPP calls. Second highest precedence setting for MLPP calls. Third highest precedence setting for MLPP calls. Fourth highest precedence setting for MLPP calls. Lowest precedence setting for MLPP calls.
Note
To check the check boxes of every precedence level, click Select All. To clear the check boxes, click Clear All.
In the From Date field, choose the date and time from which you want CDRs searched. When you configure the time range, use UTC. In the To Date field, choose the date and time to which you want CDRs searched. Choose whether to run the CDR Search report With Grouping or Without Grouping. If you chose With Grouping, check the check box beside With Grouping. The default specifies Without Grouping
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
8-6
OL-12483-01
Chapter 8
Note
With Grouping means that the system returns CDR records that match the date and time range for the search are returned and groups them with their associated records. Without Grouping returns all the CDR records that match the date and time range without grouping all the associated records for each call together.
Step 6
Click OK. The Call Precedence Details window displays and shows the call precedence levels and values, number of call legs, and percentage of call legs.
Step 7 Step 8
In the Select CDRs column, check the check box(es) of the CDR(s) at which you want to look. Click View CDRs. The CDR-CMR Search by Precedence Levels - CDR-CMR Search Results window displays. The system displays only the oldest 100 records that fall into the date and time ranges that you configured in Step 3 and Step 4. If more than 100 records are returned, the system truncates the results.
Step 9 Step 10
To view the CMR data, click the Others button. To view both the CDR and CMR data fields, click the View button. To mail the report to e-mail recipient(s), click Send Report and follow the steps in the Mailing a Report section on page 5-14.
Additional Information
Choose CDR > Search > Malicious Calls. The CDR Search for Malicious Calls window displays. Perform one of the following tasks:
Step 2
In the Select Extension(s) box, enter an extension in the Extension field and click Add Extension. The extension of the user displays in the Selected Extension(s) box. To search for a user extension, click the Search Extension(s) based on User(s) link, enter the first few letters of the first and/or last name in the First Name and/or Last Name fields, and click the Search button. When the results display, click the Select link next to the result that you want to include. The extension number that is associated with the user appears in the Selected Extension(s) box. Click the Close button.
Note
To remove an extension, highlight the extension(s) that you want removed and click Remove Extension(s). To remove all extensions, click Remove All Extensions.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
8-7
Step 3 Step 4
Choose the date and time range of the period when you want to search CDR data. When you configure the time range, use UTC. Choose whether to run the CDR Search report With Grouping or Without Grouping. If you chose with grouping, check the box beside With Grouping. The default is Without Grouping
Note
With Grouping means that the system returns CDR records that match the date and time range for the search and groups them with their associated records. Without Grouping returns all the CDR records that match the date and time range without grouping all the associated records for each call together.
Step 5
Click OK. The CDR-CMR Search Results window displays. The system only displays the oldest 100 records that fall into the date and time ranges that you configured in Step 3. If more than 100 records are returned, the system truncates the results.
Step 6 Step 7
To view the CMR data, click the Others button. To view both the CDR and CMR data fields, click the View button. To mail the report to e-mail recipient(s), follow the steps in the Mailing a Report section on page 5-14.
Additional Information
Related Topics
Understanding the CDR Search Results, page 11-48 Media Information, page 11-49 CDR and CMR Dump Tables, page 11-49 Mailing a Report, page 5-14 Configuring CDR Search by User Extension, page 8-1 Configuring CDR Search by Gateway, page 8-3 Configuring CDR Search by Cause for Call Termination, page 8-4 Viewing Call Termination Details, page 8-5 Configuring CDR Search By Call Precedence Levels, page 8-6 Configuring CDR Search for Malicious Calls, page 8-7 Call Termination Cause Codes, page 10-110
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
8-8
OL-12483-01
CH A P T E R
Exporting CDR/CMR Records, page 9-1 Viewing Export CDR/CMR Records Results, page 9-2 Related Topics, page 9-2
From CDR Analysis and Reporting, choose CDR > Export CDR/CMR. The Export CDR/CMR records window displays. In the From Date and To Date drop-down list boxes, choose a date range for the CDR/CMR dump. In Select records, check the CDR records and/or CMR records check box. Click Export to File. The Export CDR/CMR records Result window displays. See the Viewing Export CDR/CMR Records Results section on page 9-2.
Additional Information
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
9-1
Before you begin the following procedure, perform all the steps in the Export CDR/CMR Records Configuration section on page 9-1.
Procedure
Step 1
From the Export CDR/CMR Record Results window, right-click either the CDR Dump or CMR Dump link. A pop-up window that comprises the following options displays:
OpenThis option allows you to open the web page that contains the CDR/CMR dump in the same window. Open in a New WindowThis option allows you to open the web page that contains the CDR/CMR dump in a new window. Save Target As...This option allows you to save the CDR/CMR dump to a location on your computer. Print TargetThis option allows you to print the CDR/CMR dump information. Copy ShortcutThis option allows you to copy the web page shortcut to paste in another file. Add to FavoritesThis option allows you to add the CDR/CMR dump to your Favorites folder. PropertiesThis option provides the properties of the CDR/CMR dump file.
Step 2 Step 3
From the pop-up window, choose one of the options. If you chose to save the CDR/CMR dump to your computer, choose a location in which to save the dump and click Save. After the download is complete, you can locate the file wherever you downloaded it to open it. To delete the CDR and/or CMR dump, check the Delete File check box and click either Back or Close. The files get deleted.
Step 4
Note
If you do not check the Delete File check box(es) (for example, if the CDR or CMR dump files get left undeleted), the background process deletes the files on a daily basis. Because the CDR and CMR dump files are large in size, Cisco recommends that you download the file to a local disk and delete them from the server to avoid disk usage on the server side.
Additional Information
Related Topics
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
9-2
OL-12483-01
Chapter 9
CDR Search Configuration, page 8-1 CDR Analysis and Reporting Configuration Checklist, page 1-15 Viewing Export CDR/CMR Records Results, page 9-2
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
9-3
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
9-4
OL-12483-01
CH A P T E R
10
CDR Processing, page 10-2 Cisco Unified Communications Manager CDR Overview, page 10-3 Call Types, page 10-8 Interpreting Cisco Personal Assistant Data in the CDRs, page 10-30 Call Scenarios, page 10-36 CDR Field Descriptions, page 10-84 CMR Field Descriptions (Diagnostic), page 10-102 K-Factor Data in CMRs, page 10-107 Codec Types, page 10-108 Call Termination Cause Codes, page 10-110 Redirect Reason Codes, page 10-113 OnBehalfof Codes, page 10-114 Related Topics, page 10-115 Related Documentation, page 10-116
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-1
CDR Processing
Cisco Unified Communications Manager generates two different types of call information records: CDRs and CMRs. The CDR records store information about a call. The CMR records store information about the quality of the streamed audio of the call. The CDR records relate to the CMR records by way of two GlobalCallID columns: Global CallID callManagerId and GlobalCallID Called. Depending upon the call scenario, there may be more than one CMR for each CDR. When Cisco Unified Communications Manager places or receives a call, the system generates a CDR record when the call terminates. The system writes the CDR to a flat file (text file). Inside the Cisco Unified Communications Manager, the Call Control process generates CDR records. The system writes records when significant changes occur to a given call, such as ending the call, transferring the call, redirecting the call, splitting the call, joining a call, and so forth. When CDR records are enabled, Call Control generates one or more CDR records for each call. The system sends these records to EnvProcessCdr, where they are written to the flat files. The number of records that are written varies by type of call, and the call scenario. When Diagnostics are enabled, the device generates CMR records for each call. The system writes one CMR record for each IP phone that is involved in the call, or for each Media Gateway Control Protocol (MGCP) gateway. These records also get sent to EnvProcessCdr where they get written to flat files. The Cisco Unified Communications Manager generates CDR and CMR records but does not perform any post-processing on the records. The system writes the records to comma-delimited flat files and periodically passes them to the CDR Repository. The CDR and CMR files represent a specific filename format within the flat file.
Filename Format
The following example shows the full format of the filename: tag_clusterId_nodeId_datetime_seqNumber
tagIdentifies the type of file, either CDR or CMR clusterIdIdentifies the cluster nodeIdIdentifies the node datetimeUTC time in yyyymmddhhmm format seqnumberSequence number cdr_Cluster1_01_200404021658_1 cmr_Cluster1_02_200404061011_6125
The CDR and CMR flat files have the following format:
Line 1List of field names comma separated Line 2List of field type comma separated Line 3Data comma separated Line 4Data comma separated
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-2
OL-12483-01
Chapter 10
Understanding Cisco Call Detail Records Cisco Unified Communications Manager CDR Overview
Note
If the value of the CDR Log Calls With Zero Duration Flag parameter is True, the system writes all calls to a flat file. See the Configuring CDR Service Parameters section on page 2-2 for additional information about this parameter.
CDR Management, page 10-3 Types of Call Information Records, page 10-5
CDR Management
The CDR Management (CDRM) feature represents a background application that supports the following capabilities:
Collects the CDR /CMR files from the Cisco Unified Communications Manager node to the CDR Repository node. Maintains the CDR/CMR files on the CDR Repository node. Allows third-party applications to retrieve CDR/CMR files on demand through a SOAP interface. Accepts on-demand requests for searching file names. Pushes CDR/CMR files from individual nodes within a cluster to the CDR Repository node. Sends CDR/CMR files from the CDR Repository node to up to three customer billing servers. Monitors disk usage of CDR/CMR files on the CDR Repository node. Periodically deletes CDR/CMR files that were successfully delivered. You can configure the amount of storage used to store flat files. The post-processing applications can later retrieve the buffered historical data to re-get any lost, corrupted, or missing data. The CDRM feature, which is not aware of the flat file format, does not manipulate the file contents.
CDRM comprises two default services, the CDR Agent and the CDR Repository Manager default services, and one activate service, CDR onDemand Service.
CDR Agent
As part of the CDRM feature, a resident component on every node within a Cisco Unified Communications Manager cluster acts as the CDR Agent. On a node where both Cisco Unified Communications Manager and the CDR Agent are running, Cisco Unified Communications Manager writes the CDRs into CDR flat files (CSV format) with a special control character (_) that is prefixed to the filename by the call-processing module and indicates that the file is not available for transfer. If this control character is not present, the system assumes the file to be available for transfer and sends the file to the designated CDR Repository node. Upon successful transfer, the system deletes the local copy of the file.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-3
Reliability gets the highest priority for the CDRM feature. CDRs are very important financial data, so the goal of this feature is to guarantee that no CDR is lost. The Cisco Unified Communications Manager nodes within a cluster continuously write CDRs to flat files, close existing flat files, and open new ones.The number of records that are written varies by the type of call and significant changes that occur during a call, such as ending the call, transferring the call, redirecting the call, splitting the call, or joining the call.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-4
OL-12483-01
Chapter 10
Understanding Cisco Call Detail Records Cisco Unified Communications Manager CDR Overview
globalCallID_callManagerId globalCallId_callId
When the Call Diagnostics service parameter is set to True, the system generates up to two CMRs for each call. Each type of call, such as conference calls, call transfers, forwarded calls, and calls through gateways, produce a set of records that get written to ASCII files at the end of the call. Only completed calls and failed calls generate CDRs and CMRs. Cisco Unified Communications Manager does not perform any post processing on CDRs or CMRs. This section contains the following topics:
Global Call Identifier, page 10-5 Number Translations, page 10-6 Partitions and Numbers, page 10-6 Timestamps, page 10-7 Call Termination Cause Codes, page 10-8
GlobalCallID 1 2 5 4
The CDR table does not contain an entry for GlobalCallID 3 because that call was active when this record was taken. The table shows GlobalCallID 5 listed before GlobalCallId 4 because the GlobalCallID 5 call ended before the GlobalCallID 4 call ended.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-5
Number Translations
The Cisco Unified Communications Manager can perform translations on the digits that a user dials. The translated number, not the actual dialed digits, appears in the CDR. For example, many companies translate 911 calls to 9-911, so the caller does not need to dial an outside line in an emergency. In these cases, the CDR contains 9911 even though the user dials 911.
Note
Gateways can perform further modifications to the number before the digits are actually output through the gateway. The CDR does not reflect these modifications.
Description This party placed the call. For transferred calls, the transferred party becomes the calling party. This number designates the originally called party, after any digit translations have occurred. For forwarded calls, this number designates the last party to receive the call. For non-forwarded calls, this field shows the original called party.
lastRedirectDn
For forwarded calls, this field designates the last party to redirect the call. For non-forwarded calls, this field shows the last party to redirect (such as transfer and conference) the call.
callingPartyNumberPartition
This number identifies the partition name that is associated with the CallingPartyNumber field. This field uniquely identifies this number because the Cisco Unified Communications Manager supports multiple Cisco Unified IP Phones with the same extension number in different partitions. For calls that ingress through a gateway, this field remains blank.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-6
OL-12483-01
Chapter 10
Understanding Cisco Call Detail Records Cisco Unified Communications Manager CDR Overview
Table 10-2
Description This number identifies the partition name that is associated with the OriginalCalledPartyNumber field. This field uniquely identifies this number because the Cisco Unified Communications Manager supports multiple Cisco Unified IP Phones with the same extension number in different partitions. For calls that egress through a gateway, this field specifies the partition name that is associated with the route pattern that pointed to the gateway.
finalCalledPartyNumberPartition
This number identifies the partition name that is associated with the FinalCalledPartyNumber field. This field uniquely identifies this number because the Cisco Unified Communications Manager supports multiple Cisco Unified IP Phones with the same extension number in different partitions. For calls that egress through a gateway, this field specifies the partition name that is associated with the route pattern that pointed to the gateway.
lastRedirectDnPartition
This number identifies the partition name that is associated with the LastRedirectDn field. This field uniquely identifies this number because the Cisco Unified Communications Manager supports multiple Cisco Unified IP Phones with the same extension number in different partitions. For calls that egress through a gateway, this field specifies the partition name that is associated with the route pattern that pointed to the gateway.
Timestamps
Timestamps within a CDR appear in Universal Coordinated Time (UTC). This value remains independent of daylight saving time changes. Unsigned 32-bit integers represent all time values. This unsigned integer value displays from the database as a single integer. The field specifies a time_t value that is obtained from the Linux operating system. The CDR includes the UTC timestamps that are shown in Table 10-3:
Table 10-3 UTC Timestamps in CDRs
Field dateTimeOrigination
Description For outgoing calls, this field designates the time the device goes off hook. For incoming calls, this field designates the time the SETUP message is received.
dateTimeConnect dateTimeDisconnect
This field designates the time the devices connect and speech begins. This field shows a zero if the call never connects. This field designates the time the call disconnects. This field shows a zero if the call never connects.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-7
IP Addresses
The system stores IP addresses as unsigned integers. The CDR file displays IP addresses as signed integers. To convert the signed decimal value to an IP address, first convert the value to a hex number, taking into consideration that it is really an unsigned number. The 32-bit hex value represents four bytes in reverse order (Intel standard). To determine the IP address, reverse the order of the bytes and convert each byte to a decimal number. The resulting four bytes represent the four-byte fields of the IP address in dotted decimal notation.
Note
The file displays a negative number when the low byte of the IP address has the most significant bit set. For example, the IP address 192.168.18.188 displays as -1139627840. To convert this IP address, perform the following procedure:
Convert the database display (-1139627840) to a hex value. The hex value equals 0xBC12A8C0. Reverse the order of the hex bytes, as shown below: CO A8 12 BC Convert the four bytes from hex to decimal, as shown below: 192 168 18 188 The IP address displays in the dotted decimal format: 192.168.18.188
When working with CDRs, you may want to read other tables in the CAR database to obtain information about the type of device in each CDR because the correlation between devices in the Device table and the IP address that is listed in the CDR is not straightforward.
Call Types
A successful call between two parties logs one CDR. Each CDR contains all fields, but some fields may not get used. If a field is not used, see the default values in the CDR definitions table. When supplementary services are involved in a call, additional CDRs may get written. In addition to the CDR, a call may involve one CMR per endpoint. In a successful call between two parties who are each using an IP phone, two CMRs get written: one for the originator and one for the destination of the call.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-8
OL-12483-01
Chapter 10
This section describes the CDRs that are written for different call types in the system.
Successful On Net Calls, page 10-9 Abandoned Calls, page 10-9 Calls with Busy or Bad Destinations, page 10-10 Short Calls, page 10-11 Forwarded or Redirected Calls, page 10-11 Pickup Calls, page 10-12 Transferred Calls, page 10-13 Conference Calls, page 10-15 Meet-Me Conferences, page 10-17 Ad Hoc Conference Linking, page 10-18 Precedence Calls (MLPP), page 10-20 Malicious Calls, page 10-21 Conference Drop Any Party, page 10-21 Immediate Divert (to Voicemail), page 10-22 Video Calls, page 10-22 Call Monitoring and Call Recording, page 10-23 AAC and iLBC Calls, page 10-25 Mobility, page 10-27 Intercom, page 10-29 Original Calling Party on Transfer, page 10-30
AA 60-second call that the caller terminates BA 60-second call that the called party clears Calling Party Calling Partition Accounts Accounts Original Called Original Called Party Partition 2309 2309 Marketing Marketing Orig Cause 16 0 Dest Cause 0 16
Duration 60 60
A B
2001 2001
Abandoned Calls
The logging of calls with zero duration represents an optional action. If logging calls with zero duration is enabled, the following actions occur:
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-9
All calls generate a CDR. If the call is abandoned, such as when a phone is taken off hook and placed back on hook, various fields do not contain data. In this case, the originalCalledPartyNumber, finalCalledPartyNumber, the partitions that are associated with them, the destIpAddr, and the dateTimeConnect fields all remain blank. All calls that are not connected have a duration of 0 second. When a call is abandoned, the cause code contains 0. If the user dials a directory number and abandons the call before it connects, the FirstDest and FinalDest fields and their associated partitions contain the directory number and the partition to which the call would have been extended. The DestIp field remains blank, and the duration specifies 0 second.
AExtension 2001 goes off hook then on hook (when the CdrLogCallsWithZeroDurationFlag is set to True). BExtension 2001 calls 2309, but 2001 hangs up (abandons) the call before it is answered. Calling Party Calling Partition Accounts Accounts 2309 Original Called Original Called Party Partition Orig Cause 16 16 Dest Cause 0 0
Duration 0 0
A B
2001 2001
ACall to PSTN number; party is engaged (cause 17 = user busy). BCall to PSTN number; number does not exist (cause 1 = number unavailable). CCall to PSTN fails because PSTN trunks are out of order (cause 38 = Network Out Of Order). Calling Party Calling Partition Accounts Accounts Accounts Original Called Party 902920262226 902920100000 902920262226 Original Called Partition PSTN PSTN PSTN Orig Cause 0 0 0 Dest Cause 17 1 38
Duration 0 0 0
A B C
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-10
OL-12483-01
Chapter 10
Short Calls
A short call, with a CdrLogCallsWithZeroDurationFlag set at True and a duration of less than 1 second, appears as a zero duration call in the CDR. The DateTimeConnect field, which shows the actual connect time of the call, differentiates these calls from failed calls. For failed calls (which never connected), this value equals zero.
Short Call CDR Example
The following table contains an example of a successful On Net call with a duration of less than 1 second, that the called party cleared.
Dest Cause 16
Duration 0
ACall from the PSTN to extension 2001, forwarded to 2309, where the call is answered BCall from the PSTN to extension 2001, forwarded to 2309, which forwards to voice-messaging system Final Called Party 2309 6000 Final Last Last Called Redirect Redirect Partition Party Partition MKTG VMAIL 2001 2309 ACNTS MKTG OriginalCalled Last Redirect Party Redirect Redirect Duration OnBehalfOf OnBehalfOf 120 60 5 5 5 5
Calling Party A B
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-11
Pickup Calls
Cisco Unified Communications Manager includes two pickup modes: Pickup and Auto Pickup. The following sections describe these calls:
Pickup
Pickup calls work like forwarded calls. The CDRs for pickup calls match those for normal calls except for the originalCalledPartyNumber field and the originalCalledPartyNumberPartition field. These fields contain the Directory Number and partition for the destination that was originally dialed by the originator of the call. If the call is picked up, the finalCalledPartyNumber and finalCalledpartyNumberPartition fields will differ and contain the Directory Number and partition of the phone that picked up the call. Also, when a call is picked up, the lastRedirectDn and lastRedirectDnPartition fields contain the directory number and partition of the last phone that redirected this call. The origTermination, destTermination, lastRedirect, and Join OnBehalfOf fields contain 16 (Pickup) and the redirect reason field contains 5 (Pickup). Pickup CDRs look the same for all types of pickup: Pickup, Group Pickup and Other Pickup.
Pickup Call CDR Example
1. 2. 3.
A call comes in from the PSTN to extensions 2000, 2001, and 2002, which are in the same pickup group. Extension 2002 picks up the call that is ringing on 2001. Extension 2002 answers the call, and the call connects between the PSTN caller and extension 2002. Dest Orig Termina- TerminaLast Redirect tion On tion On BehalfOf BehalfOf Party 2001 16 16 Last Redirect Last On Redirect Join On BehalfOf Reason BehalfOf 16 5 16
Call ID 22
Orig Cause 0
Dest Cause 16
Auto Pickup
Auto Pickup works like call pickup with auto answer. The call connects automatically, so no need exists for the last answer softkey press. The system generates two CDRs for Auto Pickup, and these CDRs have the same Call ID. The system generates the first CDR for the original call. This CDR will have the origTerminationOnBehalfOf and destTerminationOnBehalfOf fields equal to 16 (Pickup), which indicates that the call terminated on behalf of the pickup feature. The second CDR represents the final call after it was picked up. This CDR will have the lastRedirectOnBehalfOf and the joinOnBehalfOf fields set to 16 (Pickup), which indicates that the system joined the call on behalf of the Pickup feature. The lastRedirectReason contains the redirect reason of 5 (Pickup).
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-12
OL-12483-01
Chapter 10
Auto Pickup CDRs look the same for all types of auto pickup: Auto Pickup, Auto Group Pickup, and Auto Other Pickup.
Auto Pickup CDR Example
1. 2. 3.
A call comes in from the PSTN to extension 2001; 2001 and 2002 reside in the same pickup group. Extension 2002 picks up the call that is ringing on 2001. The call automatically connects between the PSTN caller and extension 2002. Dest Orig Termina- TerminaLast Redirect tion On tion On BehalfOf BehalfOf Party 2001 2001 16 16 16 16 Last Redirect Last On Redirect Join On BehalfOf Reason BehalfOf 0 16 0 5 0 16
Call ID 11 11
Transferred Calls
A single CDR cannot show all the data that is necessary for a call transfer because it is too complex. Each time that a call is transferred, the Cisco Unified Communications Manager terminates the CDR for that call and initiates a new CDR. Calls that are transferred have multiple CDRs logged for them, as follows:
1. 2. 3.
Original call from party A to party B. Call from the transferring party (party A or B) to the transfer destination (party C). Call from the transferred party (party A or B) to the destination (party C).
The first CDR represents the original placed call. The second CDR represents the setup call (consultative/announcement) that is used to initiate the transfer. The third CDR represents the transferred call itself. The first two CDRs have the origCause_value and destCause_value set to Split (126). They also have the origCallTerminationOnBehalfOf and destCallTerminationOnBehalfOf fields set to Transfer (10) to indicate that these calls were involved in a transfer. The transferred leg of the call has the joinOnBehalfOf field set to Transfer (10) to indicate this call resulted from a transfer. Therefore, all legs of the transfer can be tied back to a single call.
Transferred Calls CDR Examples
The following examples which are not an exhaustive set, illustrate the records that would get generated under the stated circumstances. This example should help clarify what records get generated on transferred calls.
Example 1
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-13
If the call was a blind transfer, the call from A to C will have a duration of zero seconds. If the call was a consultation transfer, all calls will have non-zero durations. Original Called Party and Call Party Number fields register the same.
Example 2
If the call was a blind transfer, the call from B to C will have a duration of zero seconds. If the call was a consultation transfer, all calls will have non-zero durations. Original Called Party and Call Party Number fields register the same.
Example 3
A calls B, B transfers A to C on a blind transfer. C gets Call Forwarded on No Answer to D. The following calls get logged:
1. 2. 3.
Because the call was a blind transfer, the call from B to C has a duration of zero seconds. The call from A to D will have the Original Called Party field set to C, and the Called Party Number field gets set to D.
ACall from extension 2001 to a PSTN number sustains talking for 120 seconds. BExtension 2001 initiates a transfer without consultation (duration is zero) to extension 2002. CExtension 2001 completes the transfer, dropping out of the call, and leaving a call between the other two parties. Original Called Party 3071111 2002 2002 Original Called Called Orig Partition Leg Cause PSTN ACNTS ACNTS 102 104 104 126 126 0 OrigCall Term On BehalfOf 10 10 0 DestCall Term On BehalfOf 10 10 0
Calling Calling Partition Leg ACNTS ACNTS PSTN 101 103 102
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-14
OL-12483-01
Chapter 10
ACall from extension 2001 to a PSTN number sustains talking for 120 seconds. BExtension 2001 places the PSTN call on hold and calls extension 2002, talking for 30 seconds. CExtension 2001 completes the transfer, dropping out of the call, leaving a call between the other two parties. Original Called Party 3071111 2002 2002 Original Called Called Orig Partition Leg Cause PSTN ACNTS ACNTS 102 104 104 126 126 0 OrigCall Term On BehalfOf 10 10 0 DestCall Term On BehalfOf 10 10 0
Calling Calling Partition Leg ACNTS ACNTS PSTN 101 103 102
Conference Calls
Three major operational factors exist for conference call CDRs:
1.
When the conference decreases to two parties, the two parties connect directly and release the conference resource. This change generates an additional CDR for the call between the last two parties in the conference call. For example, if four people are connected in a conference call (Amy, Dustin, Spencer, Ethan), when Ethan hangs up, three people remain in the conference call that is connected to the conference bridge (Amy, Dustin, Spencer). When Spencer hangs up, only two people remain in the conference call (Amy and Dustin). The system joins Amy and Dustin directly, and the conference resource gets released. Directly joining Amy and Dustin creates an additional CDR between the last two parties in the conference.
2.
The system adds the conference controller information to the comment field in the CDR. This information identifies the conference controller. No need now exists to examine the consultation call to determine who is the conference controller. The following example shows this information: Comment field = ConfControllerDn=1000;ConfControllerDeviceName=SEP0003E333FEBD
The conference controller DN + conference controller device name uniquely identify the
conference controller. A need for the device name exists in the case of shared lines.
If the call is involved in multiple conference calls, the comment field contains multiple
conference controller information. This situation may occur when the conference goes down to two parties, and one of these parties starts another conference. If this is the case, the last conference controller information in the comment field identifies the conference controller.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-15
3.
The party that added the participant, known as the requestor party, appears in the CDR comment field. The tags for the requestor information include ConfRequestorDn and ConfRequestorDeviceName. The party that requested to remove a participant, known as the drop requestor, appears in the CDR comment field. The tags for the drop requestor information include DropConfRequestorDn and DropConRequestorDeviceName.
Calls that are part of a conference have multiple records that are logged for them. The number of CDRs that are generated depends on the number of parties in the conference. One CDR exists for each party in the conference, one CDR for the original placed call, and one CDR for each setup call that is used to join other parties to the conference. Therefore, for a three-party ad hoc conference, six CDRs exist:
One CDR for the original call Three CDRs for the parties that are connected to the conference One CDR for each setup call One CDR for the final two parties in the conference
You can associate the setup calls with the correct call leg in the conference by examining the calling leg ID and the called leg ID. The conference bridge device holds special significance to the Cisco Unified Communications Manager. Calls to the conference bridge appear as calls to the conference bridge device. A special number in the form b0019901001 shows the conference bridge port. All calls get shown into the conference bridge, regardless of the actual direction. You can determine the original direction of each call by examining the setup call CDRs. The call legs that are connected to the conference have the following values for these fields:
finalCalledPartyNumberRepresents a conference bridge b0019901001 origCalledPartyRedirectOnBehalfOfSet to Conference (4) lastRedirectRedirectOnBehalfOfSet to Conference (4) joinOnBehalfOfSet to Conference (4) commentIdentifies the conference controller
The original placed call and all setup calls that were used to join parties to the conference have the following values for the fields:
Call from 2001 to 2309. After 60 seconds, user 2001 presses the conference key on the Cisco Unified IP Phone and dials the PSTN number 3071111. 3071111 answers and talks for 20 seconds; then, 2001 presses the conference key to complete the conference. The conference talks for 360 seconds. Each call leg shows as a call into the conference bridge. The call appears as a call into the bridge, regardless of the actual direction of the call.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-16
OL-12483-01
Chapter 10
3071111 hangs up and leaves 2001 and 2309 in the conference. Because only two participants remain in the conference, the conference features directly join the two, and they talk for another 55 seconds. Orig Conver Last Redirect sation Reason Id 0 0 0 0 0 98 0 1 1 1 0 0v
Calling Calling Original Partition Leg Called Party ACNTS 101 ACNTS 101 ACNTS 101 101 ACNTS 105 ACNTS 101 2309 2309 b0029901001 b0029901001 3071111 2309
Original Called Called Final Called Partition Leg Party MKTG MKTG 102 115 116 117 PSTN MKTG 106 102 2309 b0029901001 b0029901001 b0029901001 3071111 2309
Final Called Last Redirect Partition Party MKTG 2001 b0029901001 b0029901001 b0029901001 PSTN MKTG 3071111 b0029901001
3071111 PSTN
Original CalledParty Last OrigCall DestCall Redirect Termination Termination Redirect OnBehalfOf OnBehalfOf OnBehalfOf OnBehalfOf 4 12 12 4 4 12 4 0 0 4 4 42 0 4 4 4 0 0 0 4 4 4 0 4
Join OnBehalfOf 0 4 4 4 0 4
Duration Comment 60 360 360 360 20 55 ConfControllerDn=2001;ConfController DeviceName=SEP0003E333FEBD ConfControllerDn=2001;ConfController DeviceName=SEP0003E333FEBD ConfControllerDn=2001;ConfController DeviceName=SEP0003E333FEBD ConfControllerDn=2001;ConfController DeviceName=SEP0003E333FEBD
Meet-Me Conferences
A meet-me conference occurs when several parties individually dial into a conference bridge at a predetermined time. The Cisco Secure Conference feature uses the existing callSecuredStatus field to display the highest security status that a call reaches. For meet-me conferences, the system clears calls that try to join the conference but do not meet the security level of the meet-me conference with a terminate cause = 58 (Bearer capability not presently available).
Meet-Me Conference CDR Examples
The following table contains an example CDR for the following scenario. 5001 specifies the dial-in number. The conference bridge device signifies special significance to the Cisco Unified Communications Manager, and calls to the conference bridge appear as forwarded calls; that is, User A phones the predetermined number (5001), and the call gets forwarded to a conference bridge port. The conference bridge port appears with a special number of the form b0019901001.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-17
User A (2001) calls into a meet-me conference bridge with the phone number 5001. User B (2002) calls into a meet-me conference bridge with the phone number 5001. User C (2003) calls into a meet-me conference bridge with the phone number 5001. Original Original Called Called Party Partition 5001 5001 5001 Final Called Partition Last Redirect Partition
Duration 70 65 80
LinearNo more than two ad hoc conferences can link directly to any participating conference. NonlinearThree or more ad hoc conferences that link directly to another conference. The system does not permit this type of linking by default because potentially negative impact on conference resources exists.
Alice (1000) calls Bob (1001). This is an original call. Bob (1001) conferences in Carol (1002) This is a consultation call. Dave (1003) calls Carol (1002). This is an original call. Dave (1003) conferences in Ed (1004) This is a consultation call. Two separate conferences are created. Carol is in both conferences. At this point CDR1, CDR2, CDR3, and CDR4 are generated. Carol (1002) joins the two conferences through a conference bridge (b002990122). At this point CDR5 is generated. Dave (1003) joins the two conferences through a conference bridge (b002990122). At this point CDR6 is generated. Ed (1004) leaves the conference. CDR7 is generated. Dave (b002990122) leaves the conference. CDR8 is generated. Alice (1000) leaves the conference. CDR9 is generated. Bob (1001) leaves the conference. CDR10 is generated.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-18
OL-12483-01
Chapter 10
Calling Party Number 1000 (CDR1) 1001 (CDR2) 1003 (CDR3) 1003 (CDR4) 1002 (CDR5) 1003 (CDR6) 1004 (CDR7) b002990 1222 (CDR8) 1000 (CDR9) 1001 (CDR10) 1002 (CDR11)
globalCallID- Original Leg Dest Leg Call Original Called Final Called Last callid Call Identifier Identifier Party Number Party Number RedirectDn 1 2 3 4 3 3 3 1 11 13 21 23 22 21 24 25 12 14 22 24 25 26 27 28 1001 1002 1002 1004 b0029901222 b0029901222 b0029901222 b0029901001 1001 1002 1002 1004 1001 1002 1002 1004
1 1 1
11 12 14
15 16 17
0 0 0
This is a continuation of the previous table. Calling Party Number 1000 (CDR1) 1001 (CDR2) 1003 (CDR3) 1003 (CDR4) DestCall Termination OnBehalfOf 4 4 4 4 LastRedirect Redirect Reason 0 0 0 0 LastRedirect Destination Redirect Original Conversation OnBehalfOf ConversationID ID 0 0 0 0 0 0 0 0 0 0 0 0
Comment
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-19
Comment
ConfControllerDn=1003;ConfCont rollerDeviceName=SEP0003E333FA D1;ConfRequestorDn-1003;ConfRe questorDeviceName=SEP0003E333 FAD1 ConfControllerDn=1003;ConfCont rollerDeviceName=SEP0003E333FA D1;ConfRequestorDn-1003;ConfRe questorDeviceName=SEP0003E333 FAD1
1003 (CDR6)
98
2222
1004 (CDR7)
98
2222
ConfControllerDn=1003;ConfCon trollerDeviceName=SEP0003E33 3FAD1;ConfRequestorDn-1003;C onfRequestorDeviceName=SEP0 003E333 FAD1 ConfControllerDn=1003;ConfCon trollerDeviceName=SEP0003E33 3FAD1;ConfRequestorDn-1003;C onfRequestorDeviceName=SEP0 003E333 FAD1
98
2222
1111
0 0 0
98 98 98
4 4 4
User A (2001) calls another IP phone by dialing a precedence pattern (precedence level 2). User A (2001) calls another IP phone by dialing a precedence pattern (precedence level 3). User A receives a higher level precedence call from another network (precedence level 1). The higher precedence level call preempts the first call.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-20
OL-12483-01
Chapter 10
Orig Cause 0 0 16 0 0
Dest Cause 16 16 0 9 16
Malicious Calls
When a call gets identified as a malicious call (button press), the local Cisco Unified Communications Manager network flags the call. The Comment field flags the malicious call.
Malicious Calls CDR Example
The following table contains an example CDR of a customer call that gets marked as malicious. Original Calling Called Partition Party 5555 Original Called Orig Partition Cause ACNTS 0
Calling Party
Dest Cause 16
Comment callFlag=MALICIOUS
9728552001 CUST
The following table contains an example CDR for a call that was connected to a conference and dropped by this feature. Original Calling Original Called Orig Called Partition Party Cause Partition ACNTS ACNTS ACNTS PSTN ACNTS 2309 2309 b0029901001 b0029901001 2309 0 16 0 16 16 PSTN MKTG MKTG Final Called Last Redirect Partition Party MKTG 2001 b0029901001 b0029901001 b0029901001 PSTN 30711111
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-21
Join OnBehalfOf 0 4 4 4 0
The following table contains an example CDR for this scenario: OrigCalled Party Redirected Duration OnBehalfOf 120 60 5 5 Last Redirect Redirect OnBehalfOf 5 5
Calling Partitio n
Original Original Called Called Party Partition 2001 2001 ACNTS ACNTS
Final Last Last Called Redirect Redirect Partition Party Partition MKTG VMAIL 2001 2309 ACNTS MKTG
Video Calls
The following table contains an example CDR for a video call for this scenario:
Calling party 51234 calls the called party 57890. 100 = H.261 187962284 = 172.19.52.11 288625580 = 172.19.52.17 320 - 320
2 = QCIF
Original Original Orig Orig Orig OrigVideo OrigVideo Calling Calling Called Called Called VideoCap_ VideoCap_ VideoCap_ Transport Transport Partition Leg Party Partition Leg Codec Bandwidth Resolution Address_IP Address_Port CISCO 101 57890 CISCO 102 100 320 2 187962284 49208
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-22
OL-12483-01
Chapter 10
Dest Dest Dest VideoCap_ VideoCap_ VideoCap_ Codec Bandwidth Resolution 100 320 2
The following table contains example CDRs for a monitor call for the following scenarios:
Example ACustomer 9728134987 calls the agent 30000, and the agent answers. Supervisor 40003 monitors the call. The destConversationID from the monitoring call matches the destLegCallIdentifier of the monitored call. Example BAgent 30000 calls the customer 9728134987, and the customer answers. The supervisor 40003 monitors the call. The destConversationID from the monitoring call matches the origLegCallIdentifier of the monitored call. Orig Leg Call Identifier Dest Leg Call Identifier Orig Called Calling Party Party Number Number 9728134987 30000 4003 30000 40003 Final Called Party Number 30000 Orig Cause Values 16
Global Call ID callid AMonitored Call AMonitoring Call BMonitored Call BMonitoring Call 7 10 71 101
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-23
The following table contains example CDRs for recording calls for the following scenarios:
Example ACustomer 9728134987 calls the agent 30000, and the agent answers. The recording feature creates two recording calls to the recording device. This action results in two additional CDRs: one for the agent voice and another for the customer voice. The origConversationID from the recording CDRs match the destLegCallIdentifier of the recorded CDR. In this example, the customer hangs up. Example BAgent 30000 calls the customer 9728134987, and the customer answers. The recording feature creates two recording calls to the recording device. This action results in two additional CDRs: one for the agent voice and another for the customer voice. The origConversationID from the recording CDRs matches the origLegCallIdentifier of the recorded CDR. In this example, the agent hangs up. Orig Leg Call Identifier Dest Leg Call Identifier Orig Called Calling Party Party Number Number 9728134987 30000 30000 30000 30000 30000 30000 90000 90000 Final Called Party Number 30000 90000 90000 Orig Cause Values 16 0 0
Global Call ID callid ARecorded Call ARecording Call CDR1 ARecording Call CDR2 BRecorded Call BRecording Call CDR1 BRecording Call CDR2 7 10 11 71 100 110
16777110 16777111 16777120 16777121 16777122 16777123 16777113 16777114 16777220 16777221 16777222 16777223
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-24
OL-12483-01
Chapter 10
For AAC calls, the codec specifies Media_Payload_AAC 42. The maxFramesPerPacket specifies 1. Internet Low Bit Rate Codec (iLBC) enables graceful speech quality degradation in a lossy network where frames get lost. For iLBC calls, the codec specifies Media_Payload_ILBC = 86.
The system adds an audio bandwidth field to the CDR for AAC and iLBC calls.
Definitions This integer field contains the audio bandwidth. This integer field contains the audio bandwidth.
The system populates the bandwidth fields based on the following table.
Codec G711Alaw64k G711Alaw56k G711Ulaw64k G711Ulaw56k G722_64k G722_56k G722_48k G7231 G728 G729 G729AnnexA G729AnnexB G729AnnexAwAnnexB XV150_MR_729A
Bandwidth 64 56 64 56 64 56 48 7 16 8 8 8 8 8
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-25
NSE_VBD_729A GSM_Full_Rate GSM-Half_Rate GSM_Enhanced_Full_Rate Wide_Band_256k Is11172AudioCap Is13818AudioCap Data64 Data56 GSM G7221_32K G7221_24K AAC ILBC
AAC Calls CDR Example
The following table contains an example CDR for a call with AAC codec. Calling party 51234 calls the called party 57890. Orig MediaCap Payload Capability 42
42
The following table contains an example CDR for a call with iLBC codec. Calling party 51234 calls the called party 57890. Orig MediaCap Payload Capability 86
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-26
OL-12483-01
Chapter 10
Mobility
The system supports the following Mobility features:
The system generates a standard CDR for every call that uses the Mobility feature. When a call is split, redirected, or joined by the Mobility feature, the corresponding OnBehalfOf code represents a new value that is designated to the Mobility feature. The CAR Loader checks the following OnBehalfOf fields:
If any of the preceding OnBehalfOf codes has the Mobility code of 24, the CDR has the Mobility call type that is determined by the CAR Loader, four redirectResource codes apply for Mobility features, including Hand-In (code 303), Hand-Out (code 319), Cell Pickup (code 335), and IVR (code 399).
Mobility CDR Examples
A dual-mode phone with Enterprise number of 22285 and a cell number of 9728324124 exists. The following table contains example CDRs for mobility calls that use the dual-mode phone in the following scenarios:
Example AMobility Follow Me: 22202 calls 22285, and both 22285 and 9728324124 ring. The cell phone answers the call. The parties talk for 80 seconds. Example BMobility HandIn: A call goes to the cell phone. The parties talk for 39 seconds; the dual-mode phone gets carried into the Enterprise network, and the call gets switched from the cell network to the Enterprise network. The call lasts for another 15 seconds. Example CMobility HandOut: The handout number (H-number) specifies 555123. A call gets made to the Enterprise number 22285. They talk for 21 seconds; the dual-mode phone then gets carried out of the Enterprise network and into the cell network. The call gets switched from the Enterprise network to the cell network (9728324124). The call lasts another 39 seconds. Example DMobility Cell Pickup: A call gets made and established to 22285. They talk for 40 seconds; then, Cell Pickup gets invoked. The call gets switched from the Enterprise phone to the cell phone. The call continues for another 111 seconds.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-27
Example EMobility IVR: A call comes into the Cisco Unified Communications Manager with a string (DID#RemoteDest#TargetNum#). The call gets redirected to the TargetNum. 9728131234 calls into an IVR, and data gets collected. The target destination specifies 812345 and the call gets redirected to 812345. The call connects for 60 seconds. Orig Leg Call Identifier Dest Leg Call Identifier Orig Called Calling Party Party Number Number 22202 22202 22285 Final Called Party Number Orig Cause Values 16
Global Call ID callid AFollow Me Call CDR BMobility HandIn - Call to cell #9728324214 CDR BHandIn Call to the Enterprise CDR CHandOut Enterprise Call to 22285 CDR 861 864
Last RedirectDn
9728324124 22285
864
22481083 22481087
22202
22285
22285
22285
964
22481093 22481094
22202
22285
22285
22285
393216
965 CHandOut Server Call from Cell Phone to H-Number CDR CHandOut Call CDR DMobility Cell Pickup Enterprise Call to 22285 CDR 964 555
22481095 22481096
9728324124 555123
555123
555123
393216
22202 22202
566 DMobility Cell Pickup Server Call to Cell Phone CDR DMobility Final Handout Call CDR EMobility IVR CDR 964
22481222 22481223
22481111 22481222
22202
12345
16677100 16677102
8005559876 0
Duration 80 39 15
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-28
OL-12483-01
Chapter 10
Duration 21 0 39 40 0 111 60
Intercom
The Intercom feature provides one-way audio; therefore, the CDR reflects one-way audio. For talk-back intercom, two-way audio exists, and the CDR reflects two-way audio. The Intercom feature requires a partition (intercom partition) and existing CDR partition fields get used to identify intercom calls.
Intercom CDR Example
Example AWhisper Intercom: The configured intercom partition specifies intercom. Example BTalk-Back Intercom: Phone 20000 presses the Intercom button. 20001 invokes talk-back and talks to 20000. The configured intercom partition specifies intercom.
Orig Media Transport Dest Media Address Transport Port Address IP 0 29458 -47446006 -47446006
Dest Media Transport Orig Called Calling Party Address Party Number Number Port Partition Partition 28480 29164 Intercom Intercom Intercom Intercom
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-29
4001 calls 4002. 4002 transfers the call to 4003. The system generates three CDRs:
The call between the original parties (4001 to 4002). The consultation call between the transferring party (4002) to the final transfer destination (4003). The call from the transferred party (4001) to the transfer destination (4003).
Call 1 2 3
Note
Rule-Based Call RoutingPersonal assistant can forward and screen incoming calls based on rules that users devise. Personal assistant can handle incoming calls according to caller ID, date and time of day, or the user meeting status based on the user calendar (such as office hours, meeting schedules, vacations, holidays, and so forth). Personal assistant can also selectively route calls to other telephone numbers. Thus, personal assistant can route an incoming call to a desk phone, to a cell phone, home phone, or other phone, based on the call routing rules that users create. An incoming call can even generate an e-mail-based page.
Speech-Enabled Directory DialingPersonal assistant allows users to dial a phone number by speaking the name of the called person. Personal assistant then obtains the telephone number of that person from the corporate directory or personal address book. Speech-Enabled Voice-Mail BrowsingUsers can use voice commands to browse, listen to, and delete voice-mail messages. Speech-Enabled Simple Ad Hoc ConferencingUsers can initiate conference calls by telling personal assistant to set up a conference call with the desired participants.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-30
OL-12483-01
Chapter 10
Understanding Cisco Call Detail Records Interpreting Cisco Personal Assistant Data in the CDRs
Personal Assistant Direct Call, page 10-31 Personal Assistant Interceptor Going to Media Port and Transferring the Call, page 10-31 Personal Assistant Interceptor Going Directly to Destination, page 10-32 Personal Assistant Interceptor Going to Multiple Destinations, page 10-33 Personal Assistant Conferencing, page 10-36
User A (2101) calls Personal Assistant route point (2000) and says call User B. The call transfers to User B (2105). In this case, User B did not configure any rules.
Note
In the following example, 2000 represents the main personal assistant route point to reach personal assistant, 21XX represents the personal assistant interceptor route point, and 2001 - 2004 represents the media port. In all cases, 2101 specifies the calling number. Calling Party Number Partition Final Called Party Num Final Called Party Number Partition Phones Original Called Party Num 2000 Original Last Called Party Last Number Redir Redirect DN Partition DN Partition 1023970182 2000 1023970182 2105 1023970191 2105 Phones PAManaged PAManaged
DestLeg Identifier
Duration (secs) 34 0 5
16777217 PAManaged 16777219 2004 16777221 Phones 16777222 2105 16777217 PAManaged 16777222 2105
Personal Assistant Interceptor Going to Media Port and Transferring the Call
This scenario acts similar to Transfer without Consultation and Forwarded Calls actions. See the sections on Transfer Without Consultation section on page 10-14 and Forwarded or Redirected Calls section on page 10-11.
Personal Assistant Interceptor Going to Media Port and Transferring the Call CDR Example
User A (2101) dials 2105. The personal assistant interceptor (21XX) picks up the call and redirects it to a media port (2002). Personal assistant processes the call according to the rules (if any) and transfers the call to the destination (2105), which has not configured any rules.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-31
DestLeg Identifier
Original Called Party Last Last Number Redir Redirect DN Duration Partition DN Partition (secs) 1023970478 2105 PAManaged 2 1023970478 21xx 1023970483 9 5
16777234 Phones
16777285 2105
PAManaged 2105
User A (2101) dials 2105. The personal assistant interceptor (21XX) picks up the call, processes it according to the rules (if any), and redirects the call to the destination (2105).
The following table contains an example CDR for this scenario: Final Called Party Number Partition PA
DestLeg Identifier
Duration (secs) 8
Personal Assistant Going Directly to Destination with Rule to Forward Calls to a Different Destination CDR Example
The following table contains an example CDR for this scenario:
User A (2101) dials 2105. The Personal Assistant interceptor (21XX) picks up the call and processes it according to the rules. The Personal Assistant interceptor then redirects the call to the final destination (2110). In this case, 2105 configured a rule to forward the call to extension 2110. Final Called Party Number Partition PA
DestLeg Identifier
Duration (secs) 8
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-32
OL-12483-01
Chapter 10
Understanding Cisco Call Detail Records Interpreting Cisco Personal Assistant Data in the CDRs
The following sections contain examples of each case. The tables contain example CDRs for each of these scenarios:
Personal Assistant Direct Multiple Destinations: 2110 and 2120 (Call Accepted at First Destination), page 10-33 Personal Assistant Direct Multiple Destinations: 2110 and 2120 (Call Accepted at Second Destination), page 10-33 Personal Assistant Direct Multiple Destinations: 2110 and 2120 (Call Accepted at Third Destination), page 10-34 Personal Assistant Intercept Multiple Destinations: 2110 and 2120 (Call Accepted at First Destination), page 10-34 Personal Assistant Intercept Multiple Destinations: 2110 and 2120 (Call Accepted at Second Destination), page 10-35 Personal Assistant Intercept Multiple Destinations: 2110 and 2120 (Call Accepted at Third Destination), page 10-35
Personal Assistant Direct Multiple Destinations: 2110 and 2120 (Call Accepted at First Destination)
User A calls personal assistant and says call User B. User B answers the call at 2110 extension. Final Called Party Num Final Called Party Number Partition Phones Original Called Party Num 2000 Original Called Party Number Partition
DestLeg Identifier
16777262 Phones
16777263 2110
PAManaged 2110
Personal Assistant Direct Multiple Destinations: 2110 and 2120 (Call Accepted at Second Destination)
User A calls personal assistant and says call User B. User B answers the call at 2120 extension.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-33
Calling Orig Party LegCall Num Identifier 2001 2001 2101 2120 2110
DestLeg Identifier
Original Called Party Number Partition 1023971456 1023971467 1023971467 1023971474 1023971476
16777265 PAManaged 16777267 2001 16777273 PAManaged 16777265 2101 16777275 PAManaged 0
Personal Assistant Direct Multiple Destinations: 2110 and 2120 (Call Accepted at Third Destination)
User A calls personal assistant and says call User B. User B does not answer at either extension 2110 or 2120. Personal Assistant transfers the call to the original destination (2105), and User B then answers at that extension.
Note
2105 (the original destination) represents the third destination in this case.
Calling Orig Party LegCall Num Identifier 2002 2002 2101 2002 2101 2105
DestLeg Identifier
Original Called Party Last Last Number Redir Redirect DN Partition DN Partition 1023971602 2110 1023971615 2120 1023971619 2000 1023971619 2105 1023971627 2105 1023971629 PAManaged PAManaged Phones PAManaged PAManaged
Duration (secs) 0 0 38 0 7 0
PAManaged 2110 PAManaged 2120 Phones 2000 PAManaged 2105 PAManaged 2105
16777277 PAManaged 16777279 2002 16777277 PAManaged 16777288 2105 16777289 PAManaged 0
Personal Assistant Intercept Multiple Destinations: 2110 and 2120 (Call Accepted at First Destination)
User A calls personal assistant and says call User B. User B answers the call at extension 2110. Final Called Party Num 2110 Final Called Party Number Partition Original Called Party Num Original Called Party Last Number Redir Partition DN 1023971740 2110
16777295 Phones
PAManaged 2110
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-34
OL-12483-01
Chapter 10
Understanding Cisco Call Detail Records Interpreting Cisco Personal Assistant Data in the CDRs
DestLeg Identifier
1023971740 21XX
Personal Assistant Intercept Multiple Destinations: 2110 and 2120 (Call Accepted at Second Destination)
User A calls personal assistant and says call User B. User B answers the call at extension 2120. Final Called Party Num Final Called Party Number Partition Original Called Party Num Original Called Party Number Partition 1023971815 1023971824 1023971824 1023971832
Calling Orig Party LegCall Num Identifier 2004 2004 2101 2120
DestLeg Identifier
21XX
Personal Assistant Intercept Multiple Destinations: 2110 and 2120 (Call Accepted at Third Destination)
User A calls personal assistant and says call User B. User B does not answer at either extension 2110 or 2120. Personal assistant transfers the call to the original destination (2105), which User B then answers.
Note
2110 (the original destination) represents the third destination in this case.
Calling Orig Party LegCall Num Identifier 2001 2001 2101 2001 2101
DestLeg Identifier
Original Called Party Last Number Redir Partition DN 1023971923 2110 1023971936 2120 1023971940 2105 1023971953 2105
Duration (secs) 0 0 30 0 12
1023971940 21XX
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-35
User A calls personal assistant route point (2000) and says conference User B (2105) and User C (2110). Personal assistant conferences User B and C into User A conference. Orig LegCall Identifier 16777345 16777340 16777350 16777342 16777351 16777346 16777340 Final Called Party Number Partition PAManaged Phones PAManaged
Calling Party Num 2003 2101 2003 2003 2110 2105 2101
Calling Party DestLeg Number Partition Identifier Phones PAManaged Phones Phones PAManaged PAManaged PAManaged 16777346 16777342 16777351 16777347 16777352 16777349 16777348
Final Called Party Num 2105 2003 2002 2110 b00110201001 b00110201001 b00110201001
This table continues with this additional information. Original Called Party Number Partition 1023972575 1023972576 1023972595 1023972601 1023972609 1023972610 1023972610
Original Called Party Number 2105 2000 2110 b00110201001 b00110201001 b00110201001 b00110201001
Duration (seconds) 6 62 39 25 14 34 34
Call Scenarios
Each normal call between two parties logs one CDR. Each CDR contains all fields that are identified in preceding scenarios, but some fields may not be used. If a field is not used, it stays blank if it is an ASCII string field or shows 0 if it is a numeric field. When supplementary services are involved in a call, more CDRs may get written.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-36
OL-12483-01
Chapter 10
In addition to the CDR, one CMR per endpoint may get involved in a call. In a normal call between two parties each using an IP phone, two CMRs get written, one for the originator and one for the destination of the call. This section describes the records that are written for different call types, including all records for each call and important fields that are shown in summary tables for easy viewing and comparison.
Normal Calls (IP Phone to IP Phone), page 10-38 Abandoned Calls, page 10-38 Calls With Busy or Bad Destinations (Unsuccessful Calls), page 10-40 Forwarded Calls, page 10-41 Call Pickup, page 10-42 Call Pickup, page 10-44 Transferred Calls, page 10-45 Conference Calls, page 10-48 Secure Meet-Me Conference, page 10-50 Ad Hoc Conference Linking, page 10-50 Call Park, page 10-61 Precedence Calls (MLPP), page 10-63 Malicious Calls, page 10-64 Immediate Divert (to Voicemail), page 10-64 Barge, page 10-66 cBarge, page 10-68 Video Calls, page 10-69 Forced Authorization Code (FAC), page 10-70 Client Matter Code (CMC), page 10-70 Call Secured Status, page 10-71 Secure Meet-Me Conference, page 10-50 DTMF Method, page 10-72 RSVP, page 10-73 Redirection (3xx) Calls, page 10-74 Replaces Calls, page 10-75 Refer Calls, page 10-76 Monitor Calls, page 10-76 Recording Calls, page 10-77 AAC and iLBC Calls, page 10-79 Mobility, page 10-80 Intercom Calls, page 10-83
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-37
A successful call between two Cisco Unified IP Phones generates a single CDR at the end of the call.
The caller terminated a 60-second call. Because the calling party hangs up, the orig_CauseValue specifies 16 (Normal Clearing). Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue duration CDR 1 100 101 2001 2309 2309 2309 16 0 60
The called party clears a 60-second call. Because the called party hangs up, the dest_CauseValue specifies 16 (Normal Clearing). Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue duration CDR 1 100 101 2001 2309 2309 2309 0 16 60
Abandoned Calls
Be aware that the logging of calls with zero duration is optional. Normally these records do not get logged. If logging calls with zero duration is enabled, all calls will generate a CDR.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-38
OL-12483-01
Chapter 10
If the call was abandoned, such as when a phone is taken off hook and placed back on hook, various fields will not contain data. In this case, the originalCalledPartyNumber, finalCalledPartyNumber, the partitions associated with them, destIpAddr, and the dateTimeConnect fields stay blank. All calls that were not connected will have a duration of zero seconds. When a call is abandoned, the cause code specifies 0. If the user dialed a Directory Number and then abandoned the call before it was connected, the origCalledPartyNumber and finalcalledPartyNumber fields and their associated partitions contain the directory number and partition to which the call would have been extended. The destIPAddress field stays blank and the duration specifies zero.
Examples of Abandoned Calls
Extension 2001 goes off hook, then on hook. Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue duration 16 0 0 CDR 1 100 0 2001
Extension 2001 calls 2309, but 2001 hangs up (abandons) the call before it is answered. Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue duration CDR 2 200 201 2001 2309 2309 2309 16 0 0
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-39
Call to PSTN number, party engaged (cause 17 = user busy) Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber origCause_Value dest_CauseValue duration CDR 3 300 301 2001 9728134987 0 17 0
Call to PSTN number, number does not exist (cause 1 = number unavailable) Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber origCause_Value dest_CauseValue duration CDR 4 302 303 2001 9728134987 1 0 0
Call to PSTN fails because PSTN trunks are out of order (cause 38 = Network Out Of Order). Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber origCause_Value dest_CauseValue duration CDR 5 304 305 2001 9728134987 0 38 0
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-40
OL-12483-01
Chapter 10
Forwarded Calls
Call Forwarding uses the redirect call primitive to forward the call. Features that use the redirect call primitive will have similar CDRs. The following list gives some of the important CDR fields for forwarded calls.
The originalCalledPartyNumber contains the number of the original called party. The finalCalledPartyNumber specifies the number that answered the call. The lastRedirectDn field specifies the number that performed the last redirect. The origCalledPartyRedirectReason specifies the reason that the call was redirected the first time. For call forwarding, this field can contain (Call Forward Busy=1, Call Forward No Answer=2, Call Forward All=15). The lastRedirectRedirectReason specifies the reason that the call was redirected the last time. For call forwarding, this field can contain (Call Forward Busy=1, Call Forward No Answer=2, Call Forward All=15). The origCalledPartyRedirectOnBehalfOf field identifies which feature redirects the call for the first redirect. For call forwarding, this field specifies 5 (Call Forward). The lastRedirectRedirectOnBehalfOf field identifies which feature redirects the call for the last redirect. For call forwarding, this field specifies 5 (Call Forward).
Forwarding Examples
CFA Example - Call comes in from the PSTN to extension 2001, the call gets forwarded (CFA) to 2309, where the call is answered, and the call duration is 2 minutes. Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue origCalledPartyRedirectReason lastRedirectRedirectReason origCalledPartyRedirectOnBehalfOf lastRedirectRedirectOnBehalfOf duration CDR 12345 100 102 9728134987 2001 2309 2001 0 16 15 15 5 5 120
Multiple Hop CFA & CFNA Example - Call comes in from the PSTN to extension 1000, the call gets forwarded (CFA) to 2000; then, the call gets forwarded (CFNA) to voice mail (6000) where the caller leaves a message.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-41
Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue origCalledPartyRedirectReason lastRedirectRedirectReason origCalledPartyRedirectOnBehalfOf lastRedirectRedirectOnBehalfOf duration
Multiple Hop CFNA & CFB Example - Call comes in from the PSTN to extension 4444, the call gets forwarded (CFNA) to 5555; then, it gets forwarded (CFB) to 6666 where the call is answered and they talk for 30 seconds. Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue origCalledPartyRedirectReason lastRedirectRedirectReason origCalledPartyRedirectOnBehalfOf lastRedirectRedirectOnBehalfOf duration CDR 12347 106 108 9728134987 4444 6666 5555 16 0 2 1 5 5 30
Call Pickup
The following two types of call pickup in Cisco Unified Communications Manager exist:
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-42
OL-12483-01
Chapter 10
Pickup
Pickup Call Example
Call comes in from the PSTN to extensions 2000, 2001, and 2002, which are in the same pickup group. Extension 2002 picks up the call that is ringing on 2001. Extension 2002 answers the call, and the call connects between the PSTN caller and extension 2002. Pickup Call CDR 22 9728131234 2001 2002 2001 0 16 16 16 16 5 16
Field Names globalCallID_callId callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue origTerminationOnBehalfOf destTerminationOnBehalfOf lastRedirectOnBehalfOf lastRedirectReason joinOnBehalfOf
Auto Pickup
Auto Pickup acts like call pickup with auto answer. It does not require the last answer softkey press. The call automatically connects. Two CDRs get generated for Auto Pickup. These CDR will have the same Call ID.
The first CDR gets generated for the original call. This CDR will have the origTerminationOnBehalfOf and destTerminationOnBehalfOf fields equal to 16 (Pickup). This indicates that the call was terminated on behalf of the Pickup feature. The second CDR represents the final call after it was picked up. This CDR will have the lastRedirectOnBehalfOf and the joinOnBehalfOf fields set to 16 (Pickup). This indicates that the call was joined on behalf of the Pickup feature. The lastRedirectReason contains the redirect reason of 5 (Pickup).
Auto Pickup CDRs will look the same for all types of auto pickup: Auto Pickup, Auto Group Pickup and Auto Other Pickup.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-43
Auto Pickup Example - Call from the PSTN to extension 2001. 2001 and 2002 exist in the same pickup group. 2002 picks up the call that is ringing on 2001; the call automatically connects between the PSTN caller and 2002. They talk for 2 minutes. Original Call CDR 11 12345 12346 9728134987 2001 2001 2001 393216 393216 16 16 0 0 0 0
Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue origTerminationOnBehalfOf destTerminationOnBehalfOf lastRedirectRedirectReason lastRedirectRedirectOnBehalfOf joinOnBehalfOf duration
Call Pickup
Legacy Call Pickup calls act very similar to forwarded calls. Legacy Call Pickup uses the redirect call control primitive just like call forwarding. The following list gives the important CDR fields for Legacy Call Pickup calls.
The originalCallPartyNumber contains the number of the original called party. The finalCalledPartyNumber specifies the number of the party that picked up the call. The lastRedirectDn field specifies the number that was ringing when the call was picked up. The origCalledPartyRedirectReason specifies the reason that the call was redirected the first time. For call pickup calls this field can contain (Call Pickup = 5). The lastRedirectRedirectReason specifies the reason that the call was redirected the last time. For call pickup, this field can contain (Call Pickup = 5). The origCalledPartyRedirectOnBehalfOf field identifies which feature redirects the call for the first redirect. For call pickup, this field specifies (Pickup = 16). The lastRedirectRedirectOnBehalfOf field identifies which feature redirects the call for the last redirect. For call pickup, this field specifies (Pickup = 16).
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-44
OL-12483-01
Chapter 10
Call from the PSTN to extension 2001, 2001 and 2002 exist in the same pickup group. 2002 picks up the call ringing on 2001, 2002 answers the call, and the call connects between the PSTN caller and 2002. They talk for 2 minutes. Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue origCalledPartyRedirectReason lastRedirectRedirectReason origCalledPartyRedirectOnBehalfOf lastRedirectRedirectOnBehalfOf duration CDR 22 1 2 9728134987 2001 2002 2001 0 16 0 5 16 16 120
Transferred Calls
Calls that are transferred generate multiple CDRs. One CDR occurs for the original call, one for the consultation call, and another for the final transferred call. For the original call, the origCause_value and destCause_value gets set to (split = 393216), which indicates the call was split. The origCallTerminationOnBehalfOf and destCallTerminationOnBehalfOf fields get set to (Transfer = 10) to indicate that this call was involved in a transfer. For the consultation call, the origCause_value and destCause_value gets set to (split = 393216), which indicates that the call was split. The origCallTerminationOnBehalfOf and destCallTerminationOnBehalfOf fields get set to (Transfer = 10) to indicate that this call was involved in a transfer. For the final transferred call, the joinOnBehalfOf field gets set to (Transfer = 10) to indicate that this call resulted from a transfer.
Transfer Examples
The following examples do not represent an exhaustive set and are intended to illustrate the records that would be generated under the stated circumstances. These examples help clarify what records are generated on transferred calls.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-45
Blind Transfer from the Calling Party - Call from extension 2001 to a PSTN number, they talk for 120 seconds. 2001 initiates a blind transfer to 2002. CDR 1 (original call) shows a call from extension 2001 to a PSTN number, talking for 120 seconds. CDR 2 (consultation call) shows a call from 2001 to extension 2002. CDR 3 is the final transferred call where 2001 completes the transfer, drops out of the call, leaving a call between the PSTN and 2002. Final Transferred CDR 1 102 104 3071111 2002 2002 2001 16 0 0 0 10 360
Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue origTerminationOnBehalfOf destTerminationOnBehalfOf joinOnBehalfOf duration
Original Call CDR 1 101 102 2001 3071111 3071111 3071111 393216 393216 10 10 0 120
Consultation Call CDR 2 103 104 2001 2002 2002 2002 393216 393216 10 10 0 0
Consultation Transfer from the Calling Party - Call from extension 2001 to a PSTN number; they talk for 60 seconds. 2001 initiates a consultation transfer to 2002 and talks for 10 seconds before the transfer completes. The final transferred call talks for 360 seconds. CDR 1 (original call) shows a call from extension 2001 to a PSTN number, talking for 60 seconds. CDR 2 (consultation call) shows a call from 2001 to extension 2002, talking for 10 seconds. CDR 3 represents the final transferred call where 2001 completes the transfer, drops out of the call, leaving a call between the PSTN and 2002. Original Call CDR 1 111 112 2001 3071111 3071111 50001 393216 393216 10 10 Consultation Call CDR 2 113 114 2001 2002 2002 50001 393216 393216 10 10 Final Transferred Call CDR 1 112 114 3071111 2002 2002 2001 16 0 0 0
Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue origTerminationOnBehalfOf destTerminationOnBehalfOf
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-46
OL-12483-01
Chapter 10
joinOnBehalfOf duration
0 60
0 10
10 360
Blind Transfer from the Called Party - Call from 50000 to 50001, they talk for 120 seconds. 50001 initiates a blind transfer to 50002. CDR 1 (original call) shows a call from extension 50001 to 50002, talking for 120 seconds. CDR 2 (consultation call) shows a call from 50001 to extension 50002. CDR 3 represents the final transferred call where 50001 completes the transfer, drops out of the call, leaving a call between 50000 and 50002. Original Call CDR 1 200 201 50000 50001 50001 50001 393216 393216 10 10 0 120 Consultation Call CDR 2 202 203 50001 50002 50002 50001 393216 393216 10 10 0 0 Final Transferred Call CDR 1 200 203 50000 50002 50002 50001 16 0 0 0 10 360
Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue origTerminationOnBehalfOf destTerminationOnBehalfOf joinOnBehalfOf duration
Consultation Transfer from the Called Party - Call from 50000 to 50001, they talk for 120 seconds. 50000 initiates a blind transfer to 50002. CDR 1 (original call) shows a call from extension 50000 to a 50001, talking for 120 seconds. CDR 2 (consultation call) shows a call from 50000 to extension 50002. CDR 3 represents the final transferred call where 50000 completes the transfer, drops out of the call, leaving a call between 50001 and 50002. Original Call CDR 1 200 201 50000 50001 50001 50001 393216 393216 10 Consultation Call CDR 2 202 203 50001 50002 50002 50001 393216 393216 10 Final Transferred Call CDR 1 201 203 50000 50002 50002 50001 16 0 0
Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue origTerminationOnBehalfOf
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-47
10 0 120
10 0 0
0 10 360
Conference Calls
Calls that are part of a conference have multiple records that are logged for them. The number of CDR records that are generated depends on the number of parties in the conference. One CDR exists for each party in the conference, one CDR for the original placed call, one CDR for each setup call that was used to join other parties to the conference, and one CDR for the last two parties that connected in the conference. Therefore, for a three-party ad-hoc conference, six CDRs would exist: one CDR for the original call, three CDRs for the parties that connected to the conference, one CDR for each setup call, and one CDR for the final two parties in the conference. You can associate the setup calls with the correct call leg in the conference by examining the calling leg ID and called leg ID. The conference bridge device has special significance to the Cisco Unified Communications Manager, and calls to the conference bridge appear as calls to the conference bridge device. A special number in the form b0019901001 shows the conference bridge port. All calls get shown into the conference bridge, regardless of the actually direction; however, by examining the setup call CDRs, you can determine the original direction of each call. You can find the conference controller information in the comment field of the CDR. The format of this information follows: Comment field = ConfControllerDn=1000;ConfControllerDeviceName=SEP0003
The conference controller DN + conference controller device name uniquely identify the conference controller. The system needs the device name in the case of shared lines. If the call is involved in multiple conference calls, the comment field contains multiple conference controller information. This situation could occur when the conference goes down to two parties, and one of these parties starts another conference. If this is the case, the last conference controller information in the comment field will identify the conference controller. The finalCalledPartyNumber field contains the conference bridge number b0019901001. The origCalledPtyRedirectOnBehalfOf field gets set to (Conference = 4).
The lastRedirectRedirectOnBehalfOf field gets set to (Conference = 4). The joinOnBehalfOf field gets set to (Conference = 4). The comment field identifies the conference controller. The destConversationID field remains the same for all members in the conference. You can
The call legs connected to the conference will have the following fields information:
use this field to identify members of a conference call. The original placed call and all setup calls that were used to join parties to the conference will have the following characteristics:
The origCallTerminationOnBehalfOf field gets set to (Conference = 4). The destCallTerminationOnBehalfOf field gets set to (Conference = 4).
Conference Example
Call from 2001 to 2309. 2309 answers and talks for 60 seconds.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-48
OL-12483-01
Chapter 10
2001 presses the conference softkey and dials 3071111. 307111 answers and talks for 20 seconds, then 2001 presses the conference softkey to complete the conference. The three members of the conference talk for 360 seconds. 3071111 hangs up, leaving 2001 and 2309 in the conference. Because there are only two participants left in the conference, the conference features joins these two directly together, and they talk for another 55 seconds.
Note
Each conference call leg gets shown as placing a call into the conference bridge. The system shows the call as a call into the bridge, regardless of the actual direction of the call.
Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue origCalledPartyRedirectReason lastRedirectRedirectReason origTerminationOnBehalfOf destTerminationOnBehalfOf origCalledRedirectOnBehalfOf lastRedirectRedirectOnBehalfO f joinOnBehalfOf Conversation ID duration
Orig Call Setup Call CDR CDR 1 101 102 2001 2309 2309 2001 393216 393216 0 0 4 4 0 0 0 0 60 2 105 106 2001 3071111 3071111 3071111 0 0 0 0 4 4 0 0 0 0 20
Conference CDR 1 1 101 115 2001 b0029901001 b0029901001 b0029901001 16 393216 0 0 12 0 4 4 4 1 360
Conference CDR 2 1 102 116 2309 b0029901001 b0029901001 b0029901001 393216 393216 0 0 12 0 4 4 4 1 360
Conference CDR 3 1 106 117 3071111 b0029901001 b0029901001 b0029901001 393216 393216 0 0 4 4 4 4 4 1 360
Comment Orig Call CDR Setup Call CDR Conference CDR 1 Conference CDR 2 ConfControllerDn=2001;ConfControlerDeviceName=SEP0003E333FEBD ConfControllerDn=2001;ConfControlerDeviceName=SEP0003E333FEBD ConfControllerDn=2001;ConfControlerDeviceName=SEP0003E333FEBD
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-49
ConfControllerDn=2001;ConfControlerDeviceName=SEP0003E333FEBD
Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue origCalledPartyRedirectReason lastRedirectRedirectReason origCalledPartyRedirectOnBehalfOf lastRedirectRedirectOnBehalfOf origTerminationOnBehalfOf destTerminationOnBehalfOf
Call to the Meet-Me Conference CDR 5045247 123456879 123456999 35010 50000 50000 50000 58 0 0 0 0 0 6 6
Conference Linking using Join, page 10-51 Conference Linking Using Transfer or Direct Transfer, page 10-52 Removing a Party From a Linked Conference, page 10-54 Removing a Party (Controller) From a Linked Conference, page 10-56 Removing the Linked Conference, page 10-58
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-50
OL-12483-01
Chapter 10
Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origTerminationOnBehalfOf destTerminationOnBehalfOf lastRedirectRedirectReason lastRedirectRedirectOnBehalfOf origConversationID destConversationID Comment
CDR2: Bob -> Carol CDR1: Alice (consultation -> Bob (original call) call) 1 11 12 1000 1001 1001 1001 4 4 0 0 0 0 2 13 14 1001 1002 1002 1002 4 4 0 0 0 0
CDR5: Carol -> Conference CDR4: Dave Bridge -> Ed CDR3: Dave (consultation (conference -> Carol call) (original call) call) 3 21 22 1003 1002 1002 1002 4 4 0 0 0 0 4 23 24 1003 1004 1004 1004 4 4 0 0 0 0 3 22 25 1002
1003 0 0 98 4 0 2222
ConfControl lerDn=1003; ConfControl lerDeviceNa me=SEP0003E 333FAD1;Con fRequestorD n-1003;Conf RequestorDe viceName=SE P0003E333FA D1
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-51
Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origTerminationOnBehalfOf destTerminationOnBehalfOf lastRedirectRedirectReason lastRedirectRedirectOnBehalfOf origConversationID destConversationID Comment
b0029901222 1000
b0029901222 b0029901001 b0029901001 b0029901001 b0029901001 b0029901222 b0029901001 b0029901001 b0029901001 b0029901001 1003 0 0 98 4 0 2222
ConfControll erDn=1003;Co nfController DeviceName=S EP0003E333FA D1;ConfReque storDn-1003; ConfRequesto rDeviceName= SEP0003E333F AD1
1001 0 0 98 4
1001 0 0 98 4
1001 0 0 98 4
Note
The direction of the call between the bridges depends on which of Carols two calls is the primary call. The primary call side is the calling party of the transferred call.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-52
OL-12483-01
Chapter 10
Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origTerminationOnBehalfOf destTerminationOnBehalfOf lastRedirectRedirectReason lastRedirectRedirectOnBehalfOf origConversationID destConversationID Comment
CDR1: Alice -> Bob (original call) 1 11 12 1000 1001 1001 1001 4 4 0 0 0 0
CDR2: Bob -> Carol (consultation call) 2 13 14 1001 1002 1002 1002 4 4 0 0 0 0
CDR3: Dave -> Carol (original call) 3 21 22 1003 1002 1002 1002 4 4 0 0 0 0
CDR5: Carol -> Conference CDR4: Dave Bridge -> Carol (consultation (conference call) call) 4 23 24 1003 1004 1004 1004 4 4 0 0 0 0 1 14 17 1002
1003 10 10 98 4 0 2222
ConfControll erDn=1003;Co nfController DeviceName=S EP0003E333FA D1;ConfReque storDn-1003; ConfRequesto rDeviceName= SEP0003E333F AD1
b0029901001 1000
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-53
originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origTerminationOnBehalfOf destTerminationOnBehalfOf lastRedirectRedirectReason lastRedirectRedirectOnBehalfOf origConversationID destConversationID Comment
b0029901222 b0029901222 b0029901222 b0029901001 b0029901001 b0029901222 b0029901222 b0029901222 b0029901001 b0029901001 1003 0 0 98 4 0 2222
ConfControll erDn=1003;Co nfController DeviceName=S EP0003E333FA D1;ConfReque storDn-1003; ConfRequesto rDeviceName= SEP0003E333F AD1
1003 0 0 98 4 0 2222
ConfControll erDn=1003;Co nfController DeviceName=S EP0003E333FA D1;ConfReque storDn-1003; ConfRequesto rDeviceName= SEP0003E333F AD1
1001 0 0 98 4 0 1111
ConfControll erDn=1001;Co nfController DeviceName=S EP0003E333FE BD;ConfReque storDn-1001; ConfRequesto rDeviceName= SEP0003E333F EBD
1001 0 0 98 4 0 1111
ConfControll erDn=1001;Co nfController DeviceName=S EP0003E333FE BD;ConfReque storDn-1001; ConfRequesto rDeviceName= SEP0003E333F EBD
Note
If Bob is not a controller and the chaining occurs before Bob joins Conference 1, the call between Bob and Conference 2 is generated in the opposite direction of what is shown in the CDRs. The direction of the call between the final two parties of a conference depends on who has been in the conference the longest. The party that has been in the conference the longest becomes the calling party.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-54
OL-12483-01
Chapter 10
Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origTerminationOnBehalfOf destTerminationOnBehalfOf lastRedirectRedirectReason lastRedirectRedirectOnBehalfOf origConversationID destConversationID Comment
CDR1: Alice -> Bob (original call) 1 11 12 1000 1001 1001 1001 4 4 0 0 0 0
CDR2: Bob -> Carol (consultation call) 2 13 14 1001 1002 1002 1002 4 4 0 0 0 0
CDR3: Dave -> Carol (original call) 3 21 22 1003 1002 1002 1002 4 4 0 0 0 0
CDR5: Carol -> Conference CDR4: Dave Bridge -> Carol (consultation (conference call) call) 4 23 24 1003 1004 1004 1004 4 4 0 0 0 0 1 14 17 1002
1003 10 10 98 4 0 2222
ConfControll erDn=1003;Co nfController DeviceName=S EP0003E333FA D1;ConfReque storDn-1003; ConfRequesto rDeviceName= SEP0003E333F AD1
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-55
callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origTerminationOnBehalfOf destTerminationOnBehalfOf lastRedirectRedirectReason lastRedirectRedirectOnBehalf Of origConversationID destConversationID Comment
1000
1001
b0029901222 1000
1001
1004
b0029901001 b0029901001 b0029901001 b0029901222 b0029901222 b0029901222 b0029901001 b0029901001 b0029901001 b0029901222 b0029901222 b0029901222 1001 16 0 98 4 0 1111
ConfControll erDn=1001;Co nfController DeviceName=S EP0003E333FE BD;ConfReque storDn-1001; ConfRequesto rDeviceName= SEP0003E333F EBD
1001 4 4 98 4 0 1111
ConfControll erDn=1001;Co nfController DeviceName=S EP0003E333FE BD;ConfReque storDn-1001; ConfRequesto rDeviceName= SEP0003E333F EBD
1003 0 0 98 4 0 2222
ConfControll erDn=1003;Co nfController DeviceName=S EP0003E333FA D1;ConfReque storDn-1003; ConfRequesto rDeviceName= SEP0003E333F AD1
0 0 98 4 0 2222
ConfControll erDn=1003;Co nfController DeviceName=S EP0003E333FA D1;ConfReque storDn-1003; ConfRequesto rDeviceName= SEP0003E333F AD1
Note
The direction of a call between the final two parties of a conference depends on who has been in the conference the longest. The party that has been in the conference the longest becomes the calling party.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-56
OL-12483-01
Chapter 10
Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origTerminationOnBehalfOf destTerminationOnBehalfOf lastRedirectRedirectReason lastRedirectRedirectOnBehalfOf origConversationID destConversationID Comment
CDR1: Alice -> Bob (original call) 1 11 12 1000 1001 1001 1001 4 4 0 0 0 0
CDR2: Bob -> Carol (consultation call) 2 13 14 1001 1002 1002 1002 4 4 0 0 0 0
CDR3: Dave -> Carol (original call) 3 21 22 1003 1002 1002 1002 4 4 0 0 0 0
CDR5: Carol -> Conference CDR4: Dave Bridge -> Carol (consultation (conference call) call) 4 23 24 1003 1004 1004 1004 4 4 0 0 0 0 1 14 17 1002
1003 10 10 98 4 0 2222
ConfControll erDn=1003;Co nfController DeviceName=S EP0003E333FA D1;ConfReque storDn-1003; ConfRequesto rDeviceName= SEP0003E333F AD1
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-57
callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origTerminationOnBehalfOf destTerminationOnBehalfOf lastRedirectRedirectReason lastRedirectRedirectOnBehalf Of origConversationID destConversationID Comment
1001
1000
b0029901222 1001
1003
1004
b0029901001 b0029901001 b0029901001 b0029901222 b0029901222 b0029901222 b0029901001 b0029901001 b0029901001 b0029901222 b0029901222 b0029901222 1001 4 4 98 4 0 1111
ConfControll erDn=1001;Co nfController DeviceName=S EP0003E333FE BD;ConfReque storDn-1001; ConfRequesto rDeviceName= SEP0003E333F EBD
1001 16 0 98 4 0 1111
ConfControll erDn=1001;Co nfController DeviceName=S EP0003E333FE BD;ConfReque storDn-1001; ConfRequesto rDeviceName= SEP0003E333F EBD
1003 0 0 98 4 0 2222
ConfControll erDn=1003;Co nfController DeviceName=S EP0003E333FA D1;ConfReque storDn-1003; ConfRequesto rDeviceName= SEP0003E333F AD1
0 0 98 4 0 2222
ConfControll erDn=1003;Co nfController DeviceName=S EP0003E333FA D1;ConfReque storDn-1003; ConfRequesto rDeviceName= SEP0003E333F AD1
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-58
OL-12483-01
Chapter 10
Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origTerminationOnBehalfOf destTerminationOnBehalfOf lastRedirectRedirectReason lastRedirectRedirectOnBehalfOf origConversationID destConversationID Comment
CDR1: Alice -> Bob (original call) 1 11 12 1000 1001 1001 1001 4 4 0 0 0 0
CDR2: Bob -> Carol (consultation call) 2 13 14 1001 1002 1002 1002 4 4 0 0 0 0
CDR3: Dave -> Carol (original call) 3 21 22 1003 1002 1002 1002 4 4 0 0 0 0
CDR5: Carol -> Conference CDR4: Dave Bridge -> Carol (consultation (conference call) call) 4 23 24 1003 1004 1004 1004 4 4 0 0 0 0 1 14 17 1002
1003 10 10 98 4 0 2222
ConfControll erDn=1003;Co nfController DeviceName=S EP0003E333FA D1;ConfReque storDn-1003; ConfRequesto rDeviceName= SEP0003E333F AD1
CDR8: Alice-> Conference Bridge CDR9: Bob -> (conference Conference call) Bridge 1 11 15 1 12 16
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-59
callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origTerminationOnBehalfOf destTerminationOnBehalfOf lastRedirectRedirectReason lastRedirectRedirectOnBehalf Of origConversationID destConversationID Comment
b0029901222 1000
1001
1003
1004
1003
b0029901001 b0029901001 b0029901001 b0029901222 b0029901222 b0029901222 b0029901001 b0029901001 b0029901001 b0029901222 b0029901222 1004 1002 4 4 4 10 2222 1111
ConfControll erDn=1003;Co nfController DeviceName=S EP0003E333FA D1;ConfReque storDn-1003; ConfRequesto rDeviceName= SEP0003E333F AD1
1001 4 4 98 4 0 1111
ConfControll erDn=1001;Co nfController DeviceName=S EP0003E333FE BD;ConfReque storDn-1001; ConfRequesto rDeviceName= SEP0003E333F EBD
1001 4 4 98 4 0 1111
ConfControll erDn=1001;Co nfController DeviceName=S EP0003E333FE BD;ConfReque storDn-1001; ConfRequesto rDeviceName= SEP0003E333F EBD
1003 16 0 98 4 0 2222
ConfControll erDn=1003;Co nfController DeviceName=S EP0003E333FA D1;ConfReque storDn-1003; ConfRequesto rDeviceName= SEP0003E333F AD1
1003 0 0 98 4 0 2222
ConfControll erDn=1003;Co nfController DeviceName=S EP0003E333FA D1;ConfReque storDn-1003; ConfRequesto rDeviceName= SEP0003E333F AD1
b0029901222 0 0 98 4 0 0
ConfControll erDn=1003;Co nfController DeviceName=S EP0003E333FA D1;ConfReque storDn-1003; ConfRequesto rDeviceName= SEP0003E333F AD1
Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origTerminationOnBehalfOf destTerminationOnBehalfOf lastRedirectRedirectReason lastRedirectRedirectOnBehalf Of origConversationID
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-60
OL-12483-01
Chapter 10
destConversationID Comment
0
ConfControll erDn=1003;Co nfController DeviceName=S EP0003E333FA D1;ConfReque storDn-1003; ConfRequesto rDeviceName= SEP0003E333F AD1
Call Park
Call Park will generate two CDRs, one for the original call that is parked and another for the call that is picked up or reverted. These CDRs will have the same globalCallID_callId. This section contains the following CDR examples:
Call Park Pickup, page 10-61 Call Park Reversion, page 10-62
50003 calls 50002; 50002 presses the Park softkey. 50001 picks up the parked call by dialing the park code (44444). Original Call That Is Parked CDR 1 20863957 20863958 50003 50002 Parked Call That Is Picked Up CDR 1 20863961 20863957 50001 50003
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-61
finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue origCalledPartyRedirectReason lastRedirectRedirectReason origCalledPartyRedirectOnBehalfOf lastRedirectRedirectOnBehalfOf origTerminationOnBehalfOf destTerminationOnBehalfOf joinOnBehalfOf duration
50003 44444 0 16 0 8 0 3 0 12 3 60
Call Park Reversion Example 50003 calls 50002, 50002 presses the Park softkey. Nobody picks up the parked call; it reverts to 50002, and 50002 answers. Original Call That Is Parked CDR 2 20863963 20863964 50003 50002 50002 50002 393216 393216
Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-62
OL-12483-01
Chapter 10
0 0 0 0 3 3 0 7
7 11 3 3 3 12 3 60
Call to another IP phone by dialing a precedence pattern (precedence level 2). Precedence Call CDR 100 12345 12346 2001 826001 0 16 2 2
Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber origCalledPartyNumber origCause_Value dest_CauseValue origPrecedenceLevel destPrecedenceLevel
Received precedence call from another network (precedence level 1) Precedence Call CDR 102 11111 11112 9728552001 6001 16
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-63
0 1 1
Call gets preempted by a higher precedence level call. Original call CDR 10000 12345678 12345679 2001 826001 0 9 2 2 Higher Level Call CDR 10001 12345680 12345681 9728551234 826001 0 16 1 1
Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber origCalledPartyNumber origCause_Value dest_CauseValue origPrecedenceLevel destPrecedenceLevel
Malicious Calls
When a call is identified as a malicious call (button press), the local network (CCM) flags the call. The comment field gets used to flag the malicious call.
Malicious Call Example
Customer call marked as malicious. Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber origCalledPartyNumber origCause_Value dest_CauseValue Comment Original call CDR 1 100 101 9728552001 5555 0 16 callFlag=MALICIOUS
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-64
OL-12483-01
Chapter 10
The IDivert feature can get invoked while the incoming call is ringing. The CDR for the ringing case acts very similar to call forwarding, but the origCalledPartyRedirectOnBehalfOf and the lastRedirectRedirectOnBehalfOf specifies (Immediate Divert = 14). The IDivert feature can get invoked while the call is connected or on hold. These scenarios generate two CDRs. Both CDRs will have the same globalCallID_CallId field. The first CDR applies to the original connection, and the second CDR applies to the call redirected to voice-messaging system. The first call will have the origTerminationOnBehalfOf and destTerminationOnBehalfOf field set to (Immediate Divert = 14). The call that is redirected to the voice-messaging system will have the origCalledPartyRedirectOnBehalfOf and the lastRedirectRedirectOnBehalfOf set to (Immediate Divert = 14).
IDivert Examples
IDivert during Alerting 40003 calls 40001 and while 40001 is ringing, 40001 presses the IDivert button and call diverts to the voice-messaging system (40000).
Note
If the call is redirected by IDivert in the Alerting state, only one CDR is generated.
Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber origCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue origCalledPartyRedirectReason lastRedirectRedirectReason origCalledPartyRedirectOnBehalfOf lastRedirectRedirectOnBehalfOf joinOnBehalfOf
IDivert during Connect 40003 calls 40001, and 40001 answers the call. 40001 decides to divert the caller to the voice-messaging system and presses the IDivert softkey. 40003 gets diverted to the voice-messaging system (40000). Because the call was connected before the redirect, two CDRs get generated: one for the original connected call and another for the call diverted to the voice-messaging system. Original Connected Call CDR 38
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-65
origLegCallIdentifier destLegCallIdentifier callingPartyNumber origCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue origCalledPartyRedirectReason lastRedirectRedirectReason origCalledPartyRedirectOnBehalfOf lastRedirectRedirectOnBehalfOf origTerminationOnBehalfOf destTerminationOnBehalfOf joinOnBehalfOf
14 14
14 12 14
Barge
When a shared line uses the barge feature, the origCalledPartyNumber, finalCalledPartyNumber and lastRedirectDn represent the conference bridge number b00. The redirect and join OnBehalfOf fields have a value of (Barge = 15), and the redirect reason fields specify (Barge = 114).
Barge Examples
Barge Example 1 40003 calls 40001 and 40001 answers. Shared line 40001 on another phone presses the Barge softkey. All the parties get conferenced together; then, 40003 hangs up.
Note
Both CDRs have the same globalCallID_callId, and the conversationID field links back to the CI (call Identifier) of the barged call.
Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber origCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue origCalledPartyRedirectReason
Barge Call CDR 7 16777232 16777235 40003 b001501001 b001501001 b001501001 0 0 114
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-66
OL-12483-01
Chapter 10
114 15 15 15
16777231
Barge Example 2 40003 calls 40001, and 40001 answers. Shared line 40001 on another phone presses the Barge softkey. All the parties get conferenced together; then, 40001 hangs up.
Note
Both CDRs have the same globalCallID_callId, and the conversationID field links back to the CI (call Identifier) of the barged call.
Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber origCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue origCalledPartyRedirectReason lastRedirectRedirectReason origTerminationOnBehalfOf destTerminationOnBehalfOf lastRedirectRedirectOnBehalfOf joinOnBehalfOf destConversationID
Barge Call CDR 9 16777238 16777241 40001 b001501001 b001501001 b001501001 393216 393216 114 114 15 15 15 15
16777237
Barge Example 3 40003 calls 40001, and 40001 answers. Shared line 40001 on another phone presses the Barge softkey. All the parties get conferenced together; then, 40001 (another shared line and phone) presses the Barge softkey. 40003 hangs up first.
Note
All CDRs have the same globalCallID_callId, and the conversationID field links back to the CI (call Identifier) of the barged call.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-67
origLegCallIdentifier destLegCallIdentifier callingPartyNumber origCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue origCalledPartyRedirectReason lastRedirectRedirectReason origTerminationOnBehalfOf destTerminationOnBehalfOf origRedirectOnBehalfOf lastRedirectRedirectOnBehalfOf joinOnBehalfOf destConversationID
16777250
cBarge
The cBarge feature acts very similar to the conference feature. When a shared line uses the cBarge feature, the origCalledPartyNumber, finalCalledPartyNumber and lastRedirectDn represent the conference bridge number b00. The redirect and join OnBehalfOf fields have a value of (Conference = 4), and the redirect reason fields specify (Conference = 98).
cBarge Examples
cBarge Example 40003 calls 40001, and 40001 answers; 40001 (shared line) on another phone presses the cBarge button. cBarge Call CDR 1 49 1677348 1677353 40001 b0029901001 b0029901001 b0029901001 16 0 98 98 cBarge Call CDR 2 49 1677347 1677351 40001 b0029901001 b0029901001 40001 393216 393216 98 98 cBarge Call CDR 3 49 1677346 1677352 40003 b0029901001 b0029901001 40001 393216 393216 98 98
Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue origCalledPartyRedirectReason lastRedirectRedirectReason
Orig Call CDR 49 1677346 1677347 40003 40001 40001 40001 393216 393216 0 0
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-68
OL-12483-01
Chapter 10
4 4 4 4 0 60 16777220 360
4 4 4 4 16777220
4 4 4 4 16777220 360
4 4 4 1 360
Comment Orig Call CDR cBarge Call CDR 1 cBarge Call CDR 2 cBarge Call CDR 3 Final Call CDR ConfControllerDn=40003;ConfControlerDeviceName=SEP0003E333FEBD ConfControllerDn=40003;ConfControlerDeviceName=SEP0003E333FEBD ConfControllerDn=40003;ConfControlerDeviceName=SEP0003E333FEBD ConfControllerDn=40003;ConfControlerDeviceName=SEP0003E333FEBD
Video Calls
The following example shows a CDR for a video call.
Video Calls Example
Example - Calling party 51234 calls the called party 57890. In the following example, let 100 = H.261, 187962284 = 172.19.52.11, 288625580 = 172.19.52.17, 320 = 320K, and 2 = QCIF. Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber origCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue origVideoCap_Codec origVideoCap_Bandwidth origVideoCap_Resolution origVideoTransportAddress_IP origVideoTransportAddress_Port destVideoCap_Codec destVideoCap_Bandwidth Video Call CDR 121 101 102 51234 57890 57890 57890 0 16 100 320 2 187962284 49208 100 320
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-69
2 288625580 49254
The authCodeDescription field contains the description of the authorization code. The authorizationLevel field contains the level of authorization that is associated with the authorization code. The authorizationCodeValue field contains the authorization code.
Note
The authorizationCodeValue field only displays in the CDR when the Display FAC in CDR service parameter is set to True. The default value of the parameter is False. See the Configuring CDR Service Parameters section on page 2-2
FAC Example
45000 calls 9728134987; the system prompts the user for an authorization code and enters 12345. FAC code 12345 gets configured as level 1 and name Legal1. The caller answers the call and talks for 2 minutes. The Display FAC in CDR service parameter is set to True. Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber origCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue authCodeDescription authorizationLevel duration authorizationCodeValue Values 100 16777123 16777124 45000 9728134987 9728134987 9728134987 0 16 Legal1 1 120 12345
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-70
OL-12483-01
Chapter 10
CMC Example
10000 calls 2142364624; the user gets prompted for a client matter code and enters 11111. The caller answers the call and talks for 10 minutes. Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber origCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue clientMatterCode duration Values 101 16777130 16777131 10000 2142364624 2142364624 2142364624 0 16 11111 600
Encrypted Call Example - The system encrypts the call between 20000 and 20001. The parties talk for 5 minutes. Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber origCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue callSecuredStatus duration CDR 102 16777140 16777141 20000 20001 20001 20001 0 16 2 300
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-71
Authenticated Call Example - The call between 20000 and 20001 gets authenticated (not encrypted). They talk for 10 minutes. Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber origCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue callSecuredStatus duration CDR 103 16777142 16777143 20000 20001 20001 20001 0 16 1 600
DTMF Method
These fields identify the DTMF method that is used for the call.
DTMF Call Examples
No Preference Example - The DTMF method that is used during this call represents No Preference/Best Effort. This call stays connected for 1 minute. Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber origCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue origDTMFMethod destDTMFMethod duration CDR 200 16777500 16777501 20000 20001 20001 20001 0 16 0 0 60
Preferred OOB Example - The DTMF method that is used during this call represents OOB Preferred. This call remains connected for 1 minute.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-72
OL-12483-01
Chapter 10
Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber origCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue origDTMFMethod destDTMFMethod duration
RSVP
These fields identify the status of RSVP reservation for the call. The Cisco Unified Communications Manager RSVP CDR status field value gets concatenated, and the system retains the last 32 status values for the call. For example, if a call is established with Optional policy, and the initial RSVP reservation is successful, and then it subsequently loses its bandwidth reservation and then regains its bandwidth reservation after retry, for several times during middle of the call, the call ends with a successful RSVP reservation. The CDR shows the following string as the Unified Communication RSVP reservation status for that particular stream: 2:5:2:5:2:5:2 (success:lost_bw:success:lost_bw:success:lost_bw:success).
RSVP Call Examples
A call gets established with Optional policy, and the initial RSVP reservation succeeds. The parties talk for 5 minutes. Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber origCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue origDTMFMethod CDR 300 16777300 16777301 20000 20001 20001 20001 0 16 2
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-73
destDTMFMethod duration
2 300
The system establishes a call with Optional policy, and the initial RSVP reservation succeeds, then it loses its bandwidth reservation but regains it after a retry. The parties talk for 1 minute. Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber origCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue origDTMFMethod destDTMFMethod duration CDR 301 16777302 16777303 20000 20001 20001 20001 0 16 2:5:2 2:5:2 60
Redirection Example Activate CFA on SIP phone 10010 (registered to Cisco Unified Communications Manager) with a CFA destination of 10000. 35010 calls 10010 which is CFA to 10000. The call gets redirected from 10010 to 10000. 10000 answers the call and talks for 1 minute. Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue Original Call CDR 11 21832023 21832026 35010 10010 10000 10010 0 16
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-74
OL-12483-01
Chapter 10
162 162 19 19 0 12 19 60
Replaces Calls
The following examples display CDRs for various types of Replaces calls.
Replaces Examples
Invite with Replaces SIP phone 35010 calls SIP phone 35020. The transfer button gets pressed on 35010, and a call is placed to SCCP phone 3000, 3000 answers the call; then, SIP phone 35010 completes the transfer. The final transferred call occurs between 35020 and 3000.
Note
When the transfer is complete, an Invite with Replaces is sent to Cisco Unified Communications Manager.
Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue origCalledPartyRedirectReason lastRedirectRedirectReason origCalledPartyRedirectOnBehalfOf lastRedirectRedirectOnBehalfOf origTerminationOnBehalfOf destTerminationOnBehalfOf joinOnBehalfOf duration
Original Call CDR 5045247 21822467 21822468 35010 3000 3000 3000 393216 393216 0 0 0 0 18 18 0 5
Reverted Call CDR 5045248 21822469 21822468 35020 3000 3000 35010 0 16 0 146 0 18 0 12 18 60
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-75
Refer with Replaces SIP phone 35010 calls SCCP 3000, the transfer button gets pressed on 35010, and a call is placed to SCCP 3001, 3001 answers the call; then, the SIP phone 35010 completes the transfer. The final transferred call occurs between 3000 and 3001.
Note
When the transfer completes, a Refer with Replaces gets sent to Cisco Unified Communications Manager.
Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue origCalledPartyRedirectReason lastRedirectRedirectReason origCalledPartyRedirectOnBehalfOf lastRedirectRedirectOnBehalfOf origTerminationOnBehalfOf destTerminationOnBehalfOf joinOnBehalfOf duration
Original Call CDR 5045245 21822461 21822462 35010 3000 3000 3000 393216 393216 0 0 0 0 17 17 0 25
Consultation Call CDR 5045246 21822463 21822464 35010 3001 3001 3001 393216 393216 0 0 0 0 18 18 0 4
Final Transferred Call CDR 5045245 21822462 21822464 3000 3001 3001 35010 16 0 130 146 17 18 12 17 18 25
Refer Calls
See the Replaces Calls section on page 10-75 for an example of Refer with Replaces.
Monitor Calls
The following examples show CDRs for Monitor calls.
Monitor Examples
Monitor Example 1 The customer (9728134987) calls the agent (30000), and the agent answers. The supervisor (40003) monitors the call. The destConversationID from the monitoring call matches the destLegCallIdentifier of the monitored call.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-76
OL-12483-01
Chapter 10
Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue origCalledPartyRedirectReason lastRedirectRedirectReason origCalledPartyRedirectOnBehalfOf lastRedirectRedirectOnBehalfOf destConversationID
Monitoring Call CDR 10 16777232 16777235 40003 b001501001 b001501001 b001501001 0 0 370 370 28 28
16777231
Monitor Example 2 The agent (30000) calls the customer (9728134987), and the customer answers. The supervisor (40003) monitors the call. The destConversationID from the monitoring call matches the origLegCallIdentifier of the monitored call. Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue origCalledPartyRedirectReason lastRedirectRedirectReason origCalledPartyRedirectOnBehalfOf lastRedirectRedirectOnBehalfOf destConversationID 0 Monitored Call CDR 71 16777299 16777300 30000 9728134987 9728134987 9728134987 16 0 0 0 Monitoring Call CDR 101 16777932 16777935 40003 b001501002 b001501002 b001501002 0 0 370 370 28 28 16777299
Recording Calls
The following examples show CDRs for Recording Calls.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-77
Recording Calls Example 1 The customer (9728134987) calls the agent (30000), and the agent answers. The recording feature creates two recording calls to the recording device and results in two additional CDRs: one for the agent voice and another for the customer voice. The origConversationID from the recording CDRs match the destLegCallIdentifier of the recorded call. In this example, the customer hangs up. Recorded Call CDR 7 16777110 16777111 9728134987 30000 30000 30000 16 0 0 0 Recording Call CDR1 10 16777120 16777121 30000 90000 90000 90000 0 0 354 354 27 27 0 16777111 Recording Call CDR2 11 16777122 16777123 30000 90000 90000 90000 0 0 354 354 27 27 16777111
Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue origCalledPartyRedirectReason lastRedirectRedirectReason origCalledPartyRedirectOnBehalfOf lastRedirectRedirectOnBehalfOf destConversationID
Recording Calls Example 2 The agent (30000) calls the customer (9728134987), and the customer answers. The recording feature creates two recording calls to the recording device and results in two additional CDRs: one for the agent voice and another for the customer voice. The origConversationID from the recording CDRs matches the origLegCallIdentifier of the recorded call. In this example, the agent hangs up. Recorded Call CDR 71 16777113 16777114 30000 9728134987 9728134987 9728134987 16 0 0 Recording Call CDR1 100 16777220 16777221 30000 90000 90000 90000 16 0 354 Recording Call CDR2 110 16777222 16777223 30000 90000 90000 90000 16 0 354
Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue origCalledPartyRedirectReason
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-78
OL-12483-01
Chapter 10
354 27 27
354 27 27 16777113
16777113
Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue origMediaCap_payloadCapability origMediaCap_Bandwidth destMediaCap_payloadCapability destMediaCap_Bandwidth
iLBC Call Example
AAC CDR 121 101 102 51234 57890 57890 57890 0 16 42 256 42 256
Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-79
16 86 15 86 15
Mobility
The following examples show CDRs for mobility calls.
Mobility Examples
Mobility Follow Me Example - A dual-mode phone with the Enterprise number of 22285 and the cell number of 9728324124. 22202 calls 22285, and both 22285 and 9728324124 ring. The cell phone answers the call. The system generates a single CDR for this Follow Me call. The parties talk for 80 seconds.
Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue lastRedirectRedirectReason lastRedirectRedirectOnBehalfOf origTerminationOnBehalfOf destTerminationOnBehalfOf joinOnBehalfOf duration
Follow Me Call CDR 861 22481077 22481078 22202 22285 9728324124 22285 16 0 0 0
0 80
Mobility HandIn Example - A dual-mode phone with the Enterprise number of 22285 and the cell number of 9728324124 establishes to the cell phone 9728324214. They talk for 39 seconds; then, the dual-mode phone gets carried into the Enterprise network, and the call gets switched from the cell network to the Enterprise network. The parties continue to talk for another 15 seconds.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-80
OL-12483-01
Chapter 10
Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue lastRedirectRedirectReason lastRedirectRedirectOnBehalfOf origTerminationOnBehalfOf destTerminationOnBehalfOf joinOnBehalfOf duration
Call to cell #9728324214 CDR 864 22481083 22481085 22202 919728324124 919728324124 919728324124 393216 393216 0 0 24 24 0 39
HandIn Call to the Enterprise CDR 864 22481083 22481087 22202 22285 22285 22285 0 16 303 24 24 12 24 15
Mobility HandOut Example - A dual-mode phone has the Enterprise number of 22285 and the cell number of 9728324124. The handout number (H-number) specifies 555123. A call goes to the Enterprise number 22285. They talk for 21 seconds; then, the dual-mode phone gets carried out of the Enterprise network and into the cell network. The call gets switched from the Enterprise network to the cell network (9728324124). The parties continue to talk for another 39 seconds.
Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue lastRedirectRedirectReason lastRedirectRedirectOnBehalfOf origTerminationOnBehalfOf
Enterprise Call to 22285 CDR 964 22481083 22481094 22202 22285 22285 22285 393216 393216 0 0 24
Server Call from cell phone to H-Number Handout Call CDR CDR 965 22481095 22481096 9728324124 555123 555123 555123 393216 393216 0 0 24 964 22481093 22481095 22202 9728324124 9728324124 9728324124 0 16 319 24 24
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-81
24 0 21
24 0 0
12 24 39
Mobility Call Pickup Example - A dual-mode phone with the Enterprise number of 22285 and the cell number of 9728324124, establishes a call to the Enterprise number 22285. They talk for 40 seconds; then, call pickup gets invoked. The call gets switched from the Enterprise phone to the cell phone. The parties continue to talk for another 111 seconds.
Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber lastRedirectDn origCause_Value dest_CauseValue lastRedirectRedirectReason lastRedirectRedirectOnBehalfOf origTerminationOnBehalfOf destTerminationOnBehalfOf joinOnBehalfOf duration
Enterprise Call to 22285 CDR 555 22481111 22481112 22202 22285 22285 22285 393216 393216 0 0 24 24 0 40
Server Call to Cell Phone CDR 566 22481222 22481223 9728324124 9728324124 9728324124 0 0 0 0 24 24 0 0
Final Handout Call CDR 964 22481111 22481222 22202 9728324124 9728324124 9728324124 0 16 335 24 24 12 24 111
Mobility IVR Example - A call comes into the Cisco Unified Communications Manager with string (DID#RemoteDest#TargetNum#). The call gets redirected to the TargetNum. 9728131234 calls into an IVR, and data gets collected. The target destination specifies 812345 and the call gets redirected to 812345. The call remains connected for 60 seconds.
Redirected Call CDR 12345 16677100 16677102 9728131234 8005559876 812345 8005559876
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-82
OL-12483-01
Chapter 10
0 16 399 24 0 0 60
Intercom Calls
The following two examples show CDRs for intercom.
Intercom Examples
Whisper Intercom Example - Phone 20000 invokes the intercom. The configured intercom partition name specifies Intercom.
Field Names globalCallID_callId origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber origCause_Value dest_CauseValue origMediaTransportAddress_IP origMediaTransportAddress_Port destMediaTransportAddress_IP destMediaTransportAddress_Port origCalledPartyNumberPartition callingPartyNumberPartition finalCalledPartyNumberPartition duration
Original Call CDR 1111000 21822467 21822468 20000 20001 20001 16 0 0 0 -47446006 28480 Intercom Intercom Intercom 5
Talk-Back Intercom Example - Phone 20000 presses the intercom button. 20001 invokes Talk-Back and talks to 20000. The configured intercom partition name specifies Intercom.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-83
origLegCallIdentifier destLegCallIdentifier callingPartyNumber originalCalledPartyNumber finalCalledPartyNumber origCause_Value dest_CauseValue origMediaTransportAddress_IP origMediaTransportAddress_Port destMediaTransportAddress_IP destMediaTransportAddress_Port origCalledPartyNumberPartition callingPartyNumberPartition finalCalledPartyNumberPartition duration
21822469 21822470 20000 20001 20001 16 0 -131332086 29458 -47446006 29164 Intercom Intercom Intercom 5
Range of Values 0, 1, 2
Description Defines the type of record. The following valid values apply:
0Start call detail record (not used) 1End call detail record (CDR) 2CMR record
Default - For CDRs, this field always remains 1. globalCallID_callManagerId Positive Integer Designates a unique Cisco Unified Communications Manager identity. The Global Call ID comprises two fields: globalCallID_callId globalCallID_callManagerId All records that are associated with a standard call have the same Global Call ID in them. Default -Ensure this field always is populated.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-84
OL-12483-01
Chapter 10
Table 10-4
Range of Values
Description
Positive Integer Designates unique call identity value that is assigned to each call. The system allocates this identifier independently on each call server. Values get chosen sequentially when a call begins. A value gets assigned for each call, successful or unsuccessful. When Cisco Unified Communications Manager restarts, this values resets to 1. The Global Call ID consists of two fields: globalCallID_callId globalCallID_callManagerId All records that are associated with a standard call have the same Global Call ID in them. Default - Ensure this field always is populated.
origLegCallIdentifier
Positive Integer Identifies the originating leg of a call. Be aware that this value is unique within a cluster. If the leg of a call persists across several sub-calls, and consequently several CDRs (as during a call transfer), this value remains constant. Default - Ensure this field always is populated.
dateTimeOrigination
Integer
Identifies the date and time when the user goes off hook or the date and time that the H.323 Setup message is received for an incoming call. The time gets stored as UTC. Default - Ensure this field always is populated.
origNodeId
Positive Integer Identifies the node within a cluster to which the originator of the call is registered at the time that the call is made. Default - Ensure this field always is populated.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-85
Table 10-4
Description For calls that originate at a gateway, this field indicates the B-channel number of the T1, PRI, or BRI trunk where the call originates, or a zero value for FXS or FXO trunks. For H.323 gateways, the span number is unknown, and this field contains the call leg ID of the originator. For calls that did not originate at a gateway, the value specifies zero. Default - Populated based on these rules.
origIpAddr
Integer
Identifies the IP address of the device that originated the call signaling. For Cisco Unified IP Phones, this field specifies the address of the phone. For PSTN calls, this field specifies the address of the H.323 gateway. For intercluster calls, this field specifies the address of the remote Cisco Unified Communications Manager. The IP Addresses section on page 10-8 describes the IP address format. Default - Populated based on these rules.
callingPartyNumber
Text String
Specifies numeric string of up to 25 characters. For calls that originate at a Cisco Unified IP Phone, this field shows the extension number of the line that is used. For incoming H.323 calls, this field specifies the value that is received in the Calling Party Number field in the Setup message. This field reflects any translations that are applied to the Calling Party Number before it arrives at the Cisco Unified Communications Manager (such as translations at the gateway). For server calls, where Cisco Unified Communications Manager originates a half call without a calling party, this field may remain empty. CallingPartyNumber could contain a SIP URI. Default - Populated based on these rules.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-86
OL-12483-01
Chapter 10
Table 10-4
Description Calling party login user ID. The format of this field specifies UTF_8. Default - Empty string . If the user ID does not exist, this field stays empty.
origCause_location
0 to 15
For clearing causes that are received over ISDN signaling links, specifies the Location field that is indicated in the ISDN release message. The Call Termination Cause Codes section on page 10-110 lists the valid values per Q.850. For clearing causes that are created internally by the Cisco Unified Communications Manager, this value specifies zero. Default - 0.
origCause_value
0 to 129
For calls cleared by the originating party, this field reflects the reason for clearance. Cisco Unified Communications Manager currently uses the Q.850 codes and some Cisco Unified Communications Manager defined codes. The Call Termination Cause Codes section on page 10-110 lists these. Some nonstandard cause codes changed in this release. For calls that are cleared by the terminating party, this field specifies zero. In addition to the standard values that are described in Q.850, when a call is split by a feature (transfer/conference), the CDR terminates, and this field gets set to 393216. This represents a proprietary value for this field. Default - 0.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-87
Table 10-4
Range of Values 0 to 4
Description For MLPP, each call leg includes a precedence level. This field represents the precedence level of the original leg.
Precedence 0 = FLASH OVERRIDE/ EXECUTIVE OVERRIDE Precedence 1 = FLASH Precedence 2 = IMMEDIATE Precedence 3 = PRIORITY Precedence 4 = ROUTINE
Default - 4. origMediaTransportAddress_IP 0, Integer Identifies the IP address of the device that originates the media for the call. For Cisco Unified IP Phones, this field specifies the address of the phone. For PSTN calls, this field specifies the address of the H.323 gateway. For intercluster calls, this field specifies the address of the remote phone. The IP Addresses section on page 10-8 describes the IP address format. Default - 0. If media is not established, this field stays 0. origMediaTransportAddress_Port 0, Positive Integer Identifies the IP port number that is associated with the OrigMediaTransportAddress_IP field. Default - 0. If media is not established, this field stays 0. origMediaCap_payloadCapability 0, Positive Integer Identifies the codec type that the originator uses to transmit media. Cisco Unified Communications Manager currently uses the following payload capability values (0, 1-16, 18-20, 25, 32, 33, 81-86). The Codec Types section on page 10-108 lists the valid values. Default - 0. If media is not established, this field stays 0.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-88
OL-12483-01
Chapter 10
Table 10-4
Description Identifies the number of milliseconds of data per packet that is sent by the originating party. This field is normally gets set to 10, 20, or 30 for G.729 or G.711 codecs, but the field can store any nonzero value. Default - 0. If media is not established, this field stays 0.
origMediaCap_g723BitRate
This field is not used in the current release of Cisco Unified Communications Manager. This field will remain 0. Identifies the codec type that the originator uses to transmit video (H.261, H.263, or Vieo.) Default - 0. If media is not established, this field stays 0. Identifies the bandwidth measured in units of kbps. Default - 0. If media is not established, this field stays 0.
origVideoCap_Codec
origVideoCap_Bandwidth
0, Positive Integer
origVideoCap_Resolution
Identifies the video resolution. Default - 0. If media is not established, this field stays 0.
origVideoTransportAddress_IP
0, Integer
Identifies the IP address of the device that originates the call. Default - 0. If media is not established, this field stays 0.
origVideoTransportAddress_Port
0, Positive Integer
Identifies the video RTP port that is associated with the origVideoTransportAddress_IP field. Default - 0. If media is not established, this field stays 0.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-89
Table 10-4
Range of Values 0 to 5
Description Status of RSVP audio reservation from originator to terminator. 0 No reservation. 1 RSVP Reservation Failure condition at call setup or feature invocation. 2 RSVP Reservation Success condition at call setup or feature invocation. 3 RSVP Reservation No Response (RSVP Agent) condition at call setup or feature invocation. 4 RSVP Mid Call Failure Preempted condition (preempted after call setup). 5 RSVP Mid Call Failure Lost Bandwidth condition (includes all mid-call failures except MLPP preemption). Default 0.
origRSVPVideoStat
0 to 5
Status of RSVP video reservation from originator to terminator. 0 No reservation. 1 RSVP Reservation Failure condition at call setup or feature invocation. 2 RSVP Reservation Success condition at call setup or feature invocation. 3 RSVP Reservation No Response (RSVP Agent) condition at call setup or feature invocation. 4 RSVP MID Call Failure Preempted condition (preempted after call setup). 5 RSVP MID Call Failure Lost Bandwidth condition (includes all mid-call failures except MLPP preemption). Default 0.
destLegCallIdentifier
0, Positive Integer
Identifies the terminating leg of a call. This value remains unique within a cluster. If the leg of a call persists across several sub-calls and, consequently, several CDRs (as during a call transfer), this value remains constant. Default - 0. If the destination cannot be reached, this field stays 0.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-90
OL-12483-01
Chapter 10
Table 10-4
Description Identifies the node within a cluster to which the terminating party of the call is registered at the time that the call is made. Default - 0. If the destination cannot be reached, this field stays 0.
destSpan
0, Positive integer
For calls that are received at a gateway, this field indicates the B channel number of the T1, PRI, or BRI trunk where the call is received, or a zero value for FXS or FXO trunks. For H.323 gateways, the span number remains unknown, and this field contains the call leg ID of the destination. For calls not terminating at a gateway, the value specifies zero. Default - 0. If the destination cannot be reached, this field stays 0.
destIpAddr
0, Integer
Identifies the IP address of the device that terminates the call signaling. For Cisco Unified IP Phones, this field specifies the address of the phone. For PSTN calls, this field specifies the address of the H.323 gateway. For intercluster calls, this field specifies the address of the remote Cisco Unified Communications Manager. The IP Addresses section on page 10-8 describes the IP address format. Default - 0. If the destination cannot be reached, this field stays 0.
originalCalledPartyNumber
Text String
Specifies number to which the original call was presented, prior to any call forwarding. If translation rules are configured, this number reflects the called number after the translations have been applied. Numeric string which could be either digits or a SIP URL. Default - empty string "". If destination cannot be reached, this field stays empty.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-91
Table 10-4
Description Specifies number to which the call finally gets presented, until it is answered or rings out. If no forwarding occurred, this number shows same number as originalCalledPartyNumber. For calls to a conference bridge, this field contains the actual identifier of the conference bridge, which is an alphanumeric string (for example, b0019901001). Numeric string that could be either digits or a SIP URL. Default - empty string . If destination cannot be reached, this field stays empty.
finalCalledPartyUnicodeLoginUserID
Unicode UTF_8
Final called party specifies login user ID. The format of this field is UTF_8. Default - Empty string . If the user ID does not exist, this field stays empty.
destCause_location
0 to 15
For clearing causes that are received over ISDN signaling links, the ISDN release message indicates this location field. The Call Termination Cause Codes section on page 10-110 lists the valid values per Q.850. Some of the nonstandard cause codes changed in this release. For clearing causes that Cisco Unified Communications Manager creates internally, this value equals zero. Default - 0. If the destination cannot be reached, this field stays 0.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-92
OL-12483-01
Chapter 10
Table 10-4
Description For calls that the destination party cleared, this field reflects the reason for the clearance. The Call Termination Cause Codes section on page 10-110 lists the valid values per Q.850. Some of the nonstandard cause codes changed in this release. For calls that the originating party clears, this field stays zero. In addition to the standard values that are described in Q.850, when a call gets split by a feature (transfer/conference), the CDR terminates, and this field gets set to 393216. This represents a proprietary value for this field. Default - 0. If the destination cannot be reached, this field stays 0.
destPrecedenceLevel
0 to 4
For MLPP, each call leg has a precedence level. This field represents the destination legs precedence level.
Precedence 0 = FLASH OVERRIDE Precedence 1 = FLASH Precedence 2 = IMMEDIATE Precedence 3 = PRIORITY Precedence 4 = ROUTINE
Default - 4 destMediaTransportAddress_IP 0, Integer Identifies the IP address of the device that terminates the media for the call. For Cisco Unified IP Phones, this field designates the address of the phone. For PSTN calls, this field designates the address of the H.323 gateway. For intercluster calls, this field shows the address of the remote phone. The IP Addresses section on page 10-8 describes the IP address format. Default - 0. If the destination cannot be reached, this field stays 0.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-93
Table 10-4
Description Identifies the IP port number that is associated with the DestMediaTransportAddress_IP field. Default - 0. If the destination cannot be reached, this field stays 0.
destMediaCap_payloadCapability
0, Positive Integer
Identifies the codec type that the terminating party used to transmit media. Cisco Unified Communications Manager currently uses the following payload capability values: 0, 1-16, 18-20, 25, 32, 33, 81-86. The Codec Types section on page 10-108 lists the valid values. Default - 0. If the destination cannot be reached, this field stays 0.
destMediaCap_maxFramesPerPacket
0, Positive Integer
Identifies the number of milliseconds of data per packet that the terminating party of the call sent. This field normally gets set to 10, 20, or 30 for G.729 or G.711 codecs but can store any nonzero value. This field can specify zero if the media is never established. Default - 0. If the destination cannot be reached, this field stays 0.
destMediaCap_g723BitRate
This field is not used in the current release of Cisco Unified Communications Manager. Default - This field stays 0. Identifies the codec type that the terminating party used to transmit video (H.261, H.263, or Vieo). Default - 0. If the destination cannot be reached, this field stays 0. Identifies the bandwidth measured in units of kbps. Default - 0. If the destination cannot be reached, this field stays 0.
destVideoCap_Codec
destVideoCap_Bandwidth
0, Positive Integer
destVideoCap_Resolution
Identifies the video resolution. Default - 0. If the destination cannot be reached, this field stays 0.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-94
OL-12483-01
Chapter 10
Table 10-4
Description Identifies the IP address of the device that receives the call. Default - 0. If the destination cannot be reached, this field stays 0.
destVideoTransportAddress_Port
0, Positive Integer
Identifies the video RTP port that is associated with the destVideoTransportAddress_IP field. Default - 0. If the destination cannot be reached, this field stays 0.
destRSVPAudioStat
0-5
Status of RSVP audio reservation from terminator to originator. 0 No reservation. 1 RSVP Reservation Failure condition at call setup or feature invocation. 2 RSVP Reservation Success condition at call setup or feature invocation. 3 RSVP Reservation No Response (RSVP Agent) condition at call setup or feature invocation. 4 RSVP Mid Call Failure Preempted condition (preempted after call setup). 5 RSVP Mid Call Failure Lost Bandwidth condition (includes all mid call failures except MLPP preemption). Default 0
destRSVPVideoStat
0-5
Status of RSVP video reservation from terminator to originator. 0 No reservation. 1 RSVP Reservation Failure condition at call setup or feature invocation. 2 RSVP Reservation Success condition at call setup or feature invocation. 3 RSVP Reservation No Response (RSVP Agent) condition at call setup or feature invocation. 4 RSVP Mid Call Failure Preempted condition (preempted after call setup). 5 RSVP Mid Call Failure Lost Bandwidth condition (includes all mid call failures except MLPP preemption). Default 0
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-95
Table 10-4
Description Identifies the date and time that the call connects. The time gets stored as UTC. If the call is never answered, this value shows zero. Default - 0. If the call is never connected, this field stays 0.
dateTimeDisconnect
0, Integer
Identifies the date and time when the call is cleared. This field gets set even if the call never connects. The time gets stored as UTC. Default - 0. If the call is never connected, this field stays 0.
lastRedirectDn
Text String
Specifies a numeric string of up to 25 characters. Numeric string can hold the digits or a SIP URL. For forwarded calls, this field specifies the phone number of the next to last hop before the call reaches its final destination. If only one hop occurs, this number matches the OriginalCalledPartyNumber. For calls that are not forwarded, this field matches the OriginalCalledPartyNumber and the FinalCalledPartyNumber. For calls to a conference bridge, this field contains the actual identifier of the conference bridge, which is an alphanumeric string (for example, b0019901001). Default - empty string . If call was never redirected, this field remains empty.
pkid
Text String
Identifies a text string that the database uses internally to uniquely identify each row. This text string provides no meaning to the call itself. Default - A unique ID should always populate this field.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-96
OL-12483-01
Chapter 10
Table 10-4
Description Uniquely identifies the partition name that is associated with the OriginalCalledPartyNumber field because Cisco Unified Communications Manager supports multiple Cisco Unified IP Phones with the same extension number in different partitions. For calls that egress through an H.323 gateway, this field uniquely specifies the partition name that is associated with the route pattern that points to the gateway. Default - empty string . If the original called party does not have a partition, this field remains empty.
callingPartyNumberPartition
Text String
Uniquely identifies the partition name that is associated with the CallingPartyNumber field because Cisco Unified Communications Manager supports multiple Cisco Unified IP Phones with the same extension number in different partitions. For calls that ingress through an H.323 gateway, this field remains blank. Default - empty string . If the original called party does not have a partition, this field remains empty.
finalCalledPartyNumberPartition
Text String
Uniquely identifies the partition name that is associated with the FinalCalledPartyNumber field because Cisco Unified Communications Manager supports multiple Cisco Unified IP Phones with the same extension number in different partitions. For calls that egress through an H.323 gateway, this field uniquely specifies the partition name that is associated with the route pattern that points to the gateway. Default - empty string . If the final called party does not have a partition, this field remains empty.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-97
Table 10-4
Description Uniquely identifies the partition name that is associated with the LastRedirectDn field because Cisco Unified Communications Manager supports multiple Cisco Unified IP Phones with the same extension number in different partitions. For calls that egress through an H.323 gateway, this field specifies the partition name that is associated with the route pattern that points to the gateway. Default - empty string . If the last redirecting Party does not have a partition or the call was never redirected, this field stays empty.
duration
0, Positive integer
Identifies the difference between the Connect Time and Disconnect Time. This field specifies the time that the call remains connected, in seconds. This field remains zero if the call never connects or if it connects for less than 1 second. Default - 0. Specifies text string that identifies the name of the originating device. Default - Ensure this field always is populated.
origDeviceName
Text String
destDeviceName
Text String
Specifies text string that identifies the name of the destination device. Default - empty string . If the original device does not have a name, this field stays empty.
origCallTerminationOnBehalfOf
0, Positive Integer
Specifies code that identifies why the originator was terminated. For example, if the originator of the call hangs up the phone, the OnBehalfOf code shows 12 for Device. If the call terminates because of a transfer, the OnBehalfOf code shows 10 for Transfer. See the OnBehalfof Codes section on page 10-114 for a list of the codes. This release added new OnBehalfOf codes. Default - 0.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-98
OL-12483-01
Chapter 10
Table 10-4
Description Specifies code that identifies why the destination was terminated. For example, if the originator of the call hangs up the phone, the OnBehalfOf code shows 12 for Device. If the call terminates because of a transfer, the OnBehalfOf code shows 10 for Transfer. See the OnBehalfof Codes section on page 10-114 for a list of the codes. This release added new OnBehalfOf codes. Default - 0.
origCalledPartyRedirectOnBehalfOf
0, Positive Integer
Specifies code that identifies the reason for redirection of the original called party. For example, if the original called party was redirected because of a conference, the OnBehalfOf code specifies 4. See the OnBehalfof Codes section on page 10-114 for a list of the codes. This release added new OnBehalfOf codes. Default - 0.
lastRedirectRedirectOnBehalfOf
0, Integer
Specifies code that identifies the reason for redirection of the last redirected party. For example, if the last redirected party was redirected on behalf of a conference, the OnBehalfOf code specifies 4. See the OnBehalfof Codes section on page 10-114 for a list of the codes. This release added new OnBehalfOf codes. Default - 0.
origCalledPartyRedirectReason
0, Integer
Identifies the reason for a redirect of the original called party. See the Redirect Reason Codes section on page 10-113 for a complete list of the codes. This release added new redirect reason values. Default - 0.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-99
Table 10-4
Description Identifies the last redirect reason for redirection. See the Redirect Reason Codes section on page 10-113 for a complete list of the codes. This release added new redirect reason values. Default: 0.
destConversationID
0, Integer
Specifies unique identifier that is used to identify the parties of a conference call. For conference chaining scenarios, the origConversationID and destConversationID fields identify which conferences are chained together. Default: 0.
globalCallId_ClusterId
Text String
Unique ID that identifies a cluster of Cisco Unified Communications Manager. The field is generated at installation and is not used by Cisco Unified Communications Manager. The fields globalCallId_ClusterId + globalCallId_CMId + globalCallId_CallId make up this unique key. Default: This field should always be populated.
joinOnBehalfOf
0, Integer
Specifies code that identifies the reason for a join. For example, if the join takes place on behalf of a transfer, the OnBehalfOf code specifies 10. See the OnBehalfof Codes section on page 10-114 for a list of the codes. This release added new OnBehalfOf codes. Default: 0
Comment
Text String
Allows features to add text to the CDRs. This text can describe details about the call. For example, the following field flags malicious calls: TagCallFlag ValueMALICIOUS Default: Empty string .
authCodeDescription
Text String
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-100
OL-12483-01
Chapter 10
Table 10-4
Description Level of the FAC. Default: 0 Before the system extends a call, the user enters a client matter code that can be used for assigning account or billing codes to calls. Default: Empty string or null. DTMF method that the originator uses. 0 - No DTMF - Use ANY matched DTMF. 1 - OOB - Use OOB if endpoints behind SIPTrunk support it. 2 - 2833 - Use RFC2833 if endpoints behind SIPTrunk support it. 3 - OOB and 2833 - Use both KPML and RFC2833 if endpoints behind SIPTrunk can support both. 4 - Unknown Default: 0 (No preference)
origDTMFMethod
0, Positive Integer
destDTMFMethod
0, Positive Integer
DTMF method that the destination uses. 0 - No DTMF - Use ANY matched DTMF. 1 - OOB - Use OOB if endpoints behind SIPTrunk support it. 2 - 2833 - Use RFC2833 if endpoints behind SIPTrunk support it. 3 - OOB and 2833 - Use both KPML and RFC2833 if endpoints behind SIPTrunk can support both. 4 - Unknown. Default: 0 (No preference) The highest security status that is reached during a call. For example, if the call is originally unsecured, then later the call changes to secured, the CDR contains 1 for Secured even though different portions of the call had different status values. 0 - Non-secured 1 - Authenticated (not encrypted) 2 - Secured (encrypted) Default: 0 (Non-secured)
callSecuredStatus
0, Positive Integer
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-101
Table 10-4
Description Identifies the conference ID that is associated with the originating leg of the call. In most cases, this field equals 0. For conference chaining scenarios, the origConversationID and destConversationID fields identify which conferences are chained together. Default: 0
origMediaCap_Bandwidth
The media bandwidth that is used at the origination of the call. Default: 0 The media bandwidth used at the destination of the call. Default: 0 Forced Authorization Code (FAC) that is associated with the call. Default: Empty string or null.
destMediaCap_Bandwidth
authorizationCodeValue
Range of Values 0, 1, or 2
Description Specifies the type of this specific record. The following valid values apply:
0Start call detail record (not used) 1End call detail record 2CMR record
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-102
OL-12483-01
Chapter 10
Table 10-5
Description Specifies a unique Cisco Unified Communications Manager identity. This field makes up half of the Global Call ID. The Global Call ID comprises the following fields:
globalCallId_callId globalCallID_callManagerID
All records that are associated with a standard call have the same Global Call ID in them. Default - Ensure this field always is populated. globalCallId_callId Positive Integer Specifies a unique call identity value that gets assigned to each call. The system allocates this identifier independently on each call server. Values get chosen sequentially when a call begins. Each call, successful or unsuccessful, receives value assignment. This field makes up half the Global Call ID. The Global Call ID comprises the following two fields:
globalCallId_callId globalCallID_callManagerID
All records that are associated with a standard call have the same Global Call ID in them. Default - Ensure this field always is populated. nodeId Positive Integer Specifies the node within the Cisco Unified Communications Manager cluster where this record was generated. Default - Ensure this field always is populated. callIdentifier Positive Integer Identifies the call leg to which this record pertains. Default - Ensure this field always is populated.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-103
Table 10-5
Description Specifies the directory number of the device from which these diagnostics were collected. Default - Ensure this field always is populated.
dateTimeStamp
Integer
Represents the approximate time that the device went on hook. Cisco Unified Communications Manager records the time when the phone responds to a request for diagnostic information. Default - Ensure this field always is populated.
numberPacketsSent
Integer
Designates the total number of Routing Table Protocol (RTP) data packets that the device transmitted since starting transmission on this connection. The value remains zero if the connection was set in receive only mode. Default - 0. Specifies the total number of payload octets (that is, not including header or padding) that the device transmitted in RTP data packets since starting transmission on this connection. The value remains zero if the connection was set in receive only mode. Default - 0. Specifies the total number of RTP data packets that the device received since starting reception on this connection. The count includes packets that are received from different sources if this is a multicast call. The value remains zero if the connection was set in send only mode. Default - 0.
numberOctetsSent
Integer
numberPacketsReceived
Integer
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-104
OL-12483-01
Chapter 10
Table 10-5
Description Specifies the total number of payload octets (that is, not including header or padding) that the device received in RTP data packets since starting reception on this connection. The count includes packets that are received from different sources if this is a multicast call. The value remains zero if the connection was set in send only mode. Default - 0. Designates the total number of RTP data packets that have been lost since the beginning of reception. This number designates the number of packets that were expected, less the number of packets that were actually received, where the number of packets that were received includes any that are late or duplicates. Thus, packets that arrive late do not get counted as lost, and the loss may be negative if duplicates exist. The number of packets that are expected designates the extended last sequence number that was received, as defined next, less the initial sequence number that was received. The value remains zero if the connection was set in send only mode. For detailed information, see RFC 1889. Default - 0. Provides an estimate of the statistical variance of the RTP data packet interarrival time, measured in milliseconds and expressed as an unsigned integer. The interarrival jitter J specifies the mean deviation (smoothed absolute value) of the difference D in packet spacing at the receiver, compared to the sender for a pair of packets. RFC 1889 contains detailed computation algorithms. The value remains zero if the connection was set in send only mode. Default - 0.
numberPacketsLost
Integer
jitter
Integer
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-105
Table 10-5
Description Designates value that is an estimate of the network latency, expressed in milliseconds. This value represents the average value of the difference between the NTP timestamp that the RTP Control Protocol (RTCP) messages indicates and the NTP timestamp of the receivers, measured when these messages are received. Cisco Unified Communications Manager obtains the average by summing all estimates then dividing by the number of RTCP messages that have been received. For detailed information, see RFC 1889. Default - 0. Identifies a text string that the database uses internally to uniquely identify each row. This text string provides no meaning to the call itself. Default - The system always populates this field with a unique ID.
pkid
Text String
directoryNumberPartition
Text String
Identifies the partition of the directory number. Default - Empty string, . This field may remain empty if no partition exists.
deviceName
Text String
Identifies the name of the device. Default - Empty string . This field may remain empty if there is no device name.
globalCallId_ClusterId
Text String
Designates unique ID that identifies a cluster of Cisco Unified Communications Managers. The system generates this field during installation, but Cisco Unified Communications Manager does not use it: globalCallId_ClusterId + globalCallId_callId. Default - Ensure this field always is populated.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-106
OL-12483-01
Chapter 10
Table 10-5
Description This field contains a variable number of voice quality metrics. This field comprises a string of voice quality metrics that are separated by a semicolon. The format of the string follows: fieldName=value;fieldName=value.precisi on This example shows voice quality data, but the names may differ. "MLQK=4.5000;MLQKav=4.5000;MLQ Kmn=4.5000;MLQKmx=4.5000;MLQKvr =0.95;CCR=0.0000;ICR=0.0000;ICRmx= 0.0000;CS=0;SCS=0
Note
See Table 10-6 K-Factor Data Stored in Cisco Unified Communications Manager CMRs for a complete list of K-Factor data.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-107
Table 10-6 displays the K-factor date that is stored in the Cisco Unified Communications Manager CMRs.
Table 10-6 Field Name K-Factor Data Stored in Cisco Unified Communications Manager CMRs Phone Display Name D&I User Interface Text and Description
CCR
Cumulative Conceal Ratio specifies the cumulative ratio of concealment time over speech time that is observed after starting a call. Interval Conceal Ratio specifies an interval-based average concealment rate that is the ratio of concealment time over speech time for the last 3 seconds of active speech. Interval Conceal Ratio Max specifies the maximum concealment ratio that is observed during the call. Conceal Secs.specifies the duration of time during which some concealment is observed during a call. Severely Conceal Secs specifies the time during which a significant amount of concealment is observed. If the concealment that is observed is usually greater than 50 milliseconds or approximately 5 percent, the speech probably represents not very audible speech. MOS Listening Quality K-factor provides an estimate of the MOS score of the last 9 seconds of speech on the reception signal path. MOS Listening Quality K-factor Min specifies the minimum score that was observed since the beginning of a call and represents the worst sounding 8 second interval. MOS Listening Quality K-factor Max specifies the maximum score that was observed since the beginning of a call and represents the best sounding 8 second interval. MOS Listening Quality K-factor Avg8 specifies the running average of scores that were observed since the beginning of a call.
ICR
ICRmx
CS
Conceal Secs
SCS
MLQK
MOS LQK
MLQKmn
MLQKmx
MLQKav
Codec Types
Table 10-7 contains the compression and payload types that may appear in the codec fields.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-108
OL-12483-01
Chapter 10
Table 10-7
Codec Types
Description NonStandard G711Alaw 64k G711Alaw 56k G711mu-law 64k G711mu-law 56k G722 64k G722 56k G722 48k G7231 G728 G729 G729AnnexA Is11172AudioCap Is13818AudioCap G.729AnnexB G.729 Annex AwAnnexB GSM Full Rate GSM Half Rate GSM Enhanced Full Rate Wideband 256K Data 64k Data 56k G7221 32K G7221 24K AAC GSM ActiveVoice G726_32K G726_24K G726_16K iLBC H261 H263 Vieo H264 H224
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-109
Table 10-8
Code 0 1 2 3 4 5 6 7 8 9 16 17 18 19 20 21 22 26 27 28 29 30 31 34 38 39 40 41 42 43 44
Description No error Unallocated (unassigned) number No route to specified transit network (national use) No route to destination Send special information tone Misdialed trunk prefix (national use) Channel unacceptable Call awarded and being delivered in an established channel Preemption Preemptioncircuit reserved for reuse Normal call clearing User busy No user responding No answer from user (user alerted) Subscriber absent Call rejected Number changed Non-selected user clearing Destination out of order Invalid number format (address incomplete) Facility rejected Response to STATUS ENQUIRY Normal, unspecified No circuit/channel available Network out of order Permanent frame mode connection out of service Permanent frame mode connection operational Temporary failure Switching equipment congestion Access information discarded Requested circuit/channel not available
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-110
OL-12483-01
Chapter 10
Table 10-8
Description Precedence call blocked Resource unavailable, unspecified Quality of Service not available Requested facility not subscribed Service operation violated Incoming calls barred Incoming calls barred within Closed User Group (CUG) Bearer capability not authorized Meet-Me secure conference minimum security level not met Inconsistency in designated outgoing access information and subscriber class Service or option not available, unspecified Bearer capability not implemented Channel type not implemented Requested facility not implemented Only restricted digital information bearer capability is available (national use). Service or option not implemented, unspecified Invalid call reference value Identified channel does not exist. A suspended call exists, but this call identity does not. Call identity in use No call suspended Call having the requested call identity has been cleared. User not member of CUG (Closed User Group) Incompatible destination Destination number missing and DC not subscribed Invalid transit network selection (national use) Invalid message, unspecified Mandatory information element is missing. Message type nonexistent or not implemented Message not compatible with the call state, or the message type nonexistent or not implemented An information element or parameter non-existent or not implemented Invalid information element contents Message not compatible with the call state Call terminated when timer expired; a recovery routine executed to recover from the error. Parameter nonexistent or not implemented - passed on (national use)
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-111
Table 10-8
Description Message with unrecognized parameter discarded Protocol error, unspecified Precedence Level Exceeded Device not Preemptable Out of bandwidth (Cisco specific) Call split (Cisco specific) Interworking, unspecified Precedence out of bandwidth
Table 10-9
Description Conference Full (was 124) Call split (was 126) This code applies when a call terminates during a transfer operation because it was split off and terminated (was not part of the final transferred call). This can help determine which calls terminated as part of a feature operation. Drop any party/drop last party (was 128) CCM_SIP_400_BAD_REQUEST CCM_SIP_401_UNAUTHORIZED CCM_SIP_402_PAYMENT_REQUIRED CCM_SIP_403_FORBIDDEN CCM_SIP_404_NOT_FOUND CCM_SIP_405_METHOD_NOT_ALLOWED CCM_SIP_406_NOT_ACCEPTABLE CCM_SIP_407_PROXY_AUTHENTICATION_REQUIRED CCM_SIP_408_REQUEST_TIMEOUT CCM_SIP__410_GONE CCM_SIP_411_LENGTH_REQUIRED CCM_SIP_413_REQUEST_ENTITY_TOO_LONG CCM_SIP_414_REQUEST_URI_TOO_LONG CCM_SIP_415_UNSUPPORTED_MEDIA_TYPE CCM_SIP_416_UNSUPPORTED_URI_SCHEME CCM_SIP_420_BAD_EXTENSION CCM_SIP_421_EXTENSION_REQUIRED CCM_SIP_423_INTERVAL_TOO_BRIEF CCM_SIP_480_TEMPORARILY_UNAVAILABLE
458752 16777257 33554453 50331669 67108885 83886081 100663359 117440591 134217749 150995046 184549398 201326719 234881151 251658367 268435535 285212799 83886207 369098879 402653311 1073741842
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-112
OL-12483-01
Chapter 10
Table 10-9
Code 1090519081 1107296281 1124073497 1140850716 1157627905 1174405137 1191182367 1207959583 1258291217 1291845649 1409286185 1442840614 1459617833 1476395110 1493172351 1509949567 2701131793 2717909013 2734686209 2751463455
Description CCM_SIP_481_CALL_LEG_DOES_NOT_EXIST CCM_SIP_482_LOOP_DETECTED = 0x42000000 + EXCHANGE_ROUTING_ERROR CCM_SIP_483_TOO_MANY_HOOPS CCM_SIP_484_ADDRESS_INCOMPLETE CCM_SIP_485_AMBIGUOUS CCM_SIP_486_BUSY_HERE CCM_SIP_487_REQUEST_TERMINATED CCM_SIP_488_NOT_ACCEPTABLE_HERE CCM_SIP_491_REQUEST_PENDING CCM_SIP_493_UNDECIPHERABLE CCM_SIP_500_SERVER_INTERNAL_ERROR CCM_SIP_502_BAD_GATEWAY CCM_SIP_503_SERVICE_UNAVAILABLE CCM_SIP__504_SERVER_TIME_OUT CCM_SIP_505_SIP_VERSION_NOT_SUPPORTED CCM_SIP_513_MESSAGE_TOO_LARGE CCM_SIP_600_BUSY_EVERYWHERE CCM_SIP_603_DECLINE CCM_SIP_604_DOES_NOT_EXIST_ANYWHERE CCM_SIP_606_NOT_ACCEPTABLE
Q.931 Standard Redirect Reason Codes Value 0 1 2 4 5 7 8 Description Unknown Call Forward Busy Call Forward No Answer Call Transfer Call Pickup Call Park Call Park Pickup
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-113
Table 10-10
9 10 11 15
CPE Out of Order Call Forward Call Park Reversion Call Forward All
Nonstandard Redirect Reason Codes 18 34 50 66 82 98 114 129 130 146 162 177 207 209 239 242 257 274 303 319 335 354 370 399 Call Deflection Blind Transfer Call Immediate Divert Call Forward Alternate Party Call Forward On Failure Conference Barge Aar Refer Replaces Redirection (3xx) SIP-forward busy greeting Follow Me (SIP-forward all greeting) Out of Service (SIP-forward busy greeting) Time Of Day (SIP-forward all greeting) Do Not Disturb (SIP-forward no answer greeting) Unavailable (SIP-forward busy greeting) Away (SIP-forward no answer greeting) Mobility HandIn Mobility HandOut Mobility Cell Pickup Recording Monitoring Mobility IVR
OnBehalfof Codes
Table 10-11 contains the available OnBehalfof Codes that may appear in a CDR record.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-114
OL-12483-01
Chapter 10
Table 10-11
OnBehalfof Codes
Value 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
Description Unknown CctiLine Unicast Shared Resource Provider Call Park Conference Call Forward Meet-Me Conference Meet-Me Conference Intercepts Message Waiting Multicast Shared Resource Provider Transfer SSAPI Manager Device Call Control Immediate Divert Barge Pickup Refer Replaces Redirection Callback Path Replacement FacCmc Manager Malicious Call Mobility Aar Directed Call Park Recording Monitoring
Related Topics
CDR Analysis and Reporting Overview, page 1-1 Getting Started with CDR Analysis and Reporting, page 2-1 CAR System Configuration, page 3-1
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
10-115
CAR Report Configuration, page 4-1 CAR User Reports Configuration, page 5-1 CAR System Reports Configuration, page 6-1 CAR Device Reports Configuration, page 7-1 CDR Search Configuration, page 8-1 Export CDR/CMR Records Configuration, page 9-1 CAR Report Results, page 11-1
Related Documentation
The following documents contain additional information related to CDRs:
Cisco Unified Serviceability Administration Guide Cisco Communications Manager System Guide
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
10-116
OL-12483-01
CH A P T E R
11
Tip
When a logged-in Cisco Extension Mobility user makes a call, CAR uses the user ID that is configured for the Cisco Extension Mobility user in all reports that display a user ID. When the call is made by a non-Cisco Extension Mobility user (or logged-out Cisco Extension Mobility user) or when the call is made with a device that does not have a configured Owner User ID, CAR uses the default user ID, _unspecifieduser, in the report. This chapter describes report output information for each CAR report type:
Bill Summary Report Results, page 11-2 Bill Detail Report Results, page 11-4 Top N By Charge or Duration Report Results, page 11-6 Top N By Number of Calls Report Results, page 11-8 Call Usage for AssistantDetail Report Results, page 11-10 Call Usage for AssistantSummary Report Results, page 11-11 Call Usage for ManagerDetail Report Results, page 11-13 Call Usage for ManagerSummary Report Results, page 11-14 Cisco IP Phone Services Report Results, page 11-16 QoS Detail Report Results, page 11-16 QoS Summary Report Results, page 11-18 QoS by Gateways Report Results, page 11-19 QoS by Call Types Report Results, page 11-20 Traffic Summary Report Results, page 11-22 Authorization Code Name Call Details Report Results, page 11-25 Authorization Level Call Details Report Results, page 11-26 Client Matter Code Details Report Results, page 11-27 Malicious Call Details Report Results, page 11-27 Precedence Call Summary Report Results, page 11-29 System Overview Report Results, page 11-31 CDR Error Report Results, page 11-32
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
11-1
Gateway Detail Report Results, page 11-33 Gateway Summary Report Results, page 11-35 Gateway and Route Utilization Report Results, page 11-38 Conference Call Detail Report Results, page 11-42 Conference Bridge Utilization Report Results, page 11-44 Voice Messaging Utilization Report Results, page 11-46 Understanding the CDR Search Results, page 11-48
Field On Net
Description Outgoing calls that originate on one Cisco Unified Communications Manager network, go out through a trunk, and terminate on a different Cisco Unified Communications Manager network. For CAR purposes, any outgoing call can be classified as an On Net call if it is configured as such in the CAR dial plan configuration window. See Configuring the Dial Plan section on page 3-2. Intracluster calls that originate in the Cisco Unified Communications Manager network and end in the same Cisco Unified Communications Manager network (no gateways or trunks are used). Local calls that are routed through the public switched telephone network (PSTN) to numbers without an area code or that include one of the local area codes. Long-distance calls that originate in the Cisco Unified Communications Manager network that go out through the PSTN. International calls that originate in the Cisco Unified Communications Manager network that go out through the PSTN. All other outgoing calls, such as toll-free numbers or emergency calls such as 911.
Internal
Local
Long Distance
International
Others
QOSThe number of calls for each Quality of Service category. Parameters that the CAR administrator sets provided basis for QoS categories; see the Defining the Quality of Service (QoS) Values section on page 4-5 and the QoS by Gateway Report Configuration section on page 6-6.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
11-2
OL-12483-01
Chapter 11
Table 11-1
Description QoS for these calls designates the highest possible quality. QoS for these calls shows them slightly degraded but still falls within an acceptable range. QoS for these calls, although degraded, still fall within a usable range. QoS for these calls was unsatisfactory. These calls did not match any criteria for the established QoS categories.
CallsIndicates the number of calls for each call classification. ChargeIndicates the charge that is associated with each call. Call charge information that the CAR administrator provides for the CAR rating engine provides basis for charges. See the Configuring the Rating Engine section on page 4-1. Figure 11-1 and Figure 11-2 display sample output from the Individual Bill and Department Bill Summary reports.
Figure 11-1 Individual Bill Summary Report Sample
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
11-3
Figure 11-2
Description The date that the call originated. The time that the call originated. The originating number from which the call was placed. The destination number to which the call was directed. Outgoing calls that originate on one Cisco Unified Communications Manager network, go out through a trunk, and terminate on a different Cisco Unified Communications Manager network. For CAR purposes, any outgoing call can be classified as an On Net call if it is configured as such in the CAR dial plan configuration window. See Configuring the Dial Plan section on page 3-2.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
11-4
OL-12483-01
Chapter 11
Table 11-2
Field Internal
Description Intracluster calls that originate in the Cisco Unified Communications Manager network and end in the same Cisco Unified Communications Manager network (no gateways or trunks are used). Local calls that are routed through the public switched telephone network (PSTN) to numbers without an area code or that include one of the local area codes. Long-distance calls that originate in the Cisco Unified Communications Manager network that go out through the PSTN. International calls that originate in the Cisco Unified Communications Manager network that go out through the PSTN. All other outgoing calls, such as toll-free numbers or emergency calls such as 911.
Local
Long Distance
International
Others
QOSThe number of calls for each Quality of Service category. Parameters that the CAR administrator sets provided basis for QoS categories; see the Defining the Quality of Service (QoS) Values section on page 4-5 and the QoS by Gateway Report Configuration section on page 6-6. Good Acceptable Fair Poor NA Duration(s) Charge QoS for these calls designates the highest possible quality. QoS for calls that are slightly degraded but still within an acceptable range. QoS for calls, that although degraded, still within a usable range. QoS for calls that are unsatisfactory. Calls that did not match any criteria for the established QoS categories. The time, in seconds, that the call remained connected. The charge that is associated with each call. Call charge information that the CAR administrator provided for the CAR rating engine provides the basis for charges. See the Configuring the Rating Engine section on page 4-1.
Figure 11-3 and Figure 11-4 displays sample output from the Individual Bill and Department Bill Detail reports.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
11-5
Figure 11-3
Figure 11-4
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
11-6
OL-12483-01
Chapter 11
Table 11-3
Description User names. Total number of calls. The time, in seconds, that the call was connected. The charge that is associated with each call. Call charge information that the CAR administrator provided for the CAR rating engine provides basis for charges. See the Configuring the Rating Engine section on page 4-1. The destination of the calls. The total number of calls for each call classification. Total number of calls. The time, in seconds, that the call was connected. The charge that is associated with each call. Call charge information that the CAR administrator provided for the CAR rating engine provides basis for charges. See the Configuring the Rating Engine section on page 4-1. User names. Date that the call occurred. Time that the calls originated. Origin of the calls. Destination of the calls. The total number of calls for each call classification. The time, in seconds, that the call was connected. The charge that is associated with each call. Call charge information that the CAR administrator provided for the CAR rating engine provides basis for charges. See the Configuring the Rating Engine section on page 4-1.
By Number of Calls User Date Orig Time Orig Dest Call Classification Duration Charge
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
11-7
Figure 11-6
Description User names. The total amount of billing charges for all calls to that user. Call charge information that the CAR administrator provided for the CAR rating engine provides basis for charges. See the Configuring the Rating Engine section on page 4-1. The time, in seconds, that the call connected.
Duration(s)
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
11-8
OL-12483-01
Chapter 11
Table 11-4
Field Calls Made Calls Received Total Calls By Extensions Extension No Charge
Description The total number of calls that the user placed. The total number of calls that the user received. The total number of incoming and outgoing calls. The extension that originated/placed and received the call. The total amount of billing charges for all calls to that user. Call charge information that the CAR administrator provided for the CAR rating engine provides basis for charges. See the Configuring the Rating Engine section on page 4-1. The time, in seconds, that the call was connected. The total number of calls that the user placed. The total number of calls that the user received. The total number of incoming and outgoing calls.
Figure 11-7 displays sample report output of Top N by Number of Calls by Individual Users in PDF format.
Figure 11-7 Top N by Number of Calls Report Sample Output
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
11-9
Field Date Orig. Time Orig. Dest. Call Classification Duration (sec)
Description The date that the call originated. The time that the call originated. The originating number from which the call was placed. The destination number to which the call was directed. The type of call (internal, incoming, and so on.) The time, in seconds, that the call connected.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
11-10
OL-12483-01
Chapter 11
Figure 11-8 displays sample output from a Call Usage for Assistant Detail report in PDF format.
Figure 11-8 Call Usage for Assistant Detail Report
Field Assistant-Extn/Manager
Description Shows the assistant name and directory number. If the assistant handles a call for a manager, the manager name displays.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
11-11
Table 11-6
Field Internal
Description Intracluster calls that originate in the Cisco Unified Communications Manager network and end in the same Cisco Unified Communications Manager network (no gateways or trunks are used). Local calls that are routed through the public switched telephone network (PSTN) to numbers without an area code or that include one of the local area codes. Long-distance calls that originate in the Cisco Unified Communications Manager network that go out through the PSTN. International calls that originate in the Cisco Unified Communications Manager network that go out through the PSTN. Inbound calls that originate outside the Cisco Unified Communications Manager network, enter through a gateway, and go into the Cisco Unified Communications Manager network. Outgoing calls that originate on one Cisco Unified Communications Manager network, go out through a trunk, and terminate on a different Cisco Unified Communications Manager network. For CAR purposes, any outgoing call can be classified as an On Net call if it is configured as such in the CAR dial plan configuration window. See Configuring the Dial Plan section on page 3-2. All other outgoing calls, such as toll-free numbers or emergency calls such as 911. The number of calls that the assistant handled or the assistant handled for the manager. The total duration for all the calls for the particular call classification.
Local
Long Distance
International
Incoming
On Net
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
11-12
OL-12483-01
Chapter 11
Figure 11-9 displays sample output of the Call Usage for Assistant Summary report in PDF format.
Figure 11-9 Call Usage for Assistant Summary Report
Field Date Orig. Time Orig. Dest. Call Classification Duration (sec)
Description The date that the call originates. The time that the call originates. The originating number from which the call is placed. The destination number to which the call is directed. The type of call (internal, incoming, and so on.) The time, in seconds, that the call connects.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
11-13
Figure 11-10 displays sample output from the Call Usage for Manager Detail report.
Figure 11-10 Call Usage for Manager Detail Report
Field Manager-Extn/Assistant
Description Shows the manager name and directory number. If the assistant handles a call for a manager, the assistant name displays. Intracluster calls that originate in the Cisco Unified Communications Manager network and end in the same Cisco Unified Communications Manager network (no gateways or trunks are used). Local calls that are routed through the public switched telephone network (PSTN) to numbers without an area code or which include one of the local area codes.
Local
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
11-14
OL-12483-01
Chapter 11
Table 11-8
Description Long-distance calls that originate in the Cisco Unified Communications Manager network that go out through the PSTN. International calls that originate in the Cisco Unified Communications Manager network that go out through the PSTN. Inbound calls that originate outside the Cisco Unified Communications Manager network, enter through a gateway, and go into the Cisco Unified Communications Manager network. Outgoing calls that originate on one Cisco Unified Communications Manager network, go out through a trunk, and terminate on a different Cisco Unified Communications Manager network. For CAR purposes, any outgoing call can be classified as an On Net call if it is configured as such in the CAR dial plan configuration window. See Configuring the Dial Plan section on page 3-2. All other outgoing calls, such as toll-free numbers or emergency calls such as 911. The number of calls that the assistant or the manager handles. The total duration for all the calls for the particular call classification.
International
Incoming
On Net
Figure 11-11 displays sample output of the Call Usage for Manager Summary report in PDF format.
Figure 11-11 Call Usage for Manager Summary Report
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
11-15
Description The name of the selected service. The total number of subscribers for a given service. The percentage of users who are subscribed to a given service, out of the total number of subscriptions for all services.
Figure 11-12 displays sample output from the Cisco IP Phone Services Report in PDF format.
Figure 11-12 Cisco IP Phone Services Report Sample Output
Description The time that the call was placed, in 24-hour, minute, and second format. The time that the call disconnected, in 24-hour, minute, and second format. The amount of time, in seconds, that the call was connected. The originating number from which the call was placed. The destination number to which the call was directed.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
11-16
OL-12483-01
Chapter 11
Table 11-10
Field Internal
Description Intracluster calls that originate in the Cisco Unified Communications Manager network and end in the same Cisco Unified Communications Manager network (no gateways or trunks are used). Local calls that are routed through the public switched telephone network (PSTN) to numbers without an area code or that include one of the local area codes. Long-distance calls that originate in the Cisco Unified Communications Manager network that go out through the PSTN. International calls that originate in the Cisco Unified Communications Manager network that go out through the PSTN. Outgoing calls that originate on one Cisco Unified Communications Manager network, go out through a trunk, and terminate on a different Cisco Unified Communications Manager network. For CAR purposes, any outgoing call can be classified as an On Net call if it is configured as such in the CAR dial plan configuration window. See Configuring the Dial Plan section on page 3-2. Inbound calls that originate outside the Cisco Unified Communications Manager network, enter through a gateway, and go into the Cisco Unified Communications Manager network. Inbound calls that originate outside the Cisco Unified Communications Manager network, enter the Cisco Unified Communications Manager network through a gateway, and are transferred outbound from the Cisco Unified Communications Manager network through a gateway. All other outgoing calls, such as toll-free numbers or emergency calls such as 911. The codec that the originating device uses. The codec that the destination device uses. The name of the device that placed the call. The name of the device that received the call. The voice quality that the device that placed the call experienced. The voice quality that the device that received the call experienced.
Local
Long Distance
International
On Net
Incoming
Tandem
Others Orig. Codec Dest. Codec Orig. Device Dest. Device Orig. QoS Dest. QoS
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
11-17
Figure 11-13 displays sample output of the QoS Detail report in PDF format.
Figure 11-13 QoS Detail Report
Description The quality of service of the calls. Number of call legs with the quality of service that the Quality of Service field specified.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
11-18
OL-12483-01
Chapter 11
Figure 11-14 displays sample output of the QoS Summary Report in PDF format.
Figure 11-14 QoS Summary Report in PDF Format
Field Time/Day
Description Indicates the cumulative hours of the day(s), the days of the week, or the days of the month for the selected date range. Displays the percentage of calls for each gateway for the hours of the day, the days of the week, or the days of the month for the selected date range.
% of Call Legs
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
11-19
Figure 11-15 displays sample output of the QoS by Gateways report in PDF format.
Figure 11-15 QoS by Gateways Report
Field Time/Day
Description The cumulative hours of the day(s), the days of the week, or the days of the month for the selected date range. The percentage of calls for each gateway for the hours of the day, the days of the week, or the days of the month for the selected date range.
% of Call Legs
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
11-20
OL-12483-01
Chapter 11
Table 11-13
Field Internal
Description Intracluster calls that originate in the Cisco Unified Communications Manager network and end in the same Cisco Unified Communications Manager network (no gateways or trunks are used). Local calls that are routed through the public switched telephone network (PSTN) to numbers without an area code or that include one of the local area codes. Long-distance calls that originate in the Cisco Unified Communications Manager network that go out through the PSTN. International calls that originate in the Cisco Unified Communications Manager network that go out through the PSTN. Outgoing calls that originate on one Cisco Unified Communications Manager network, go out through a trunk, and terminate on a different Cisco Unified Communications Manager network. For CAR purposes, any outgoing call can be classified as an On Net call if it is configured as such in the CAR dial plan configuration window. See Configuring the Dial Plan section on page 3-2. Inbound calls that originate outside the Cisco Unified Communications Manager network, enter through a gateway, and go into the Cisco Unified Communications Manager network. Inbound calls that originate outside the Cisco Unified Communications Manager network, enter the Cisco Unified Communications Manager network through a gateway, and are transferred outbound from the Cisco Unified Communications Manager network through a gateway. All other outgoing calls, such as toll-free numbers or emergency calls such as 911.
Local
Long Distance
International
On Net
Incoming
Tandem
Others
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
11-21
Figure 11-16 displays sample output of the QoS by Call Types report in PDF format.
Figure 11-16 QoS by Call Types Report
Table 11-14
Field Time/Day
Description The cumulative hours of the day(s), the days of the week, or the days of the month for the selected date range. The percentage of calls for each gateway for the hours of the day, the days of the week, or the days of the month for the selected date range. Intracluster calls that originate in the Cisco Unified Communications Manager network and end in the same Cisco Unified Communications Manager network (no gateways or trunks are used).
Internal
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
11-22
OL-12483-01
Chapter 11
Table 11-14
Field Local
Description Local calls that are routed through the public switched telephone network (PSTN) to numbers without an area code or that include one of the local area codes. Long-distance calls that originate in the Cisco Unified Communications Manager network that go out through the PSTN. International calls that originate in the Cisco Unified Communications Manager network that go out through the PSTN. Outgoing calls that originate on one Cisco Unified Communications Manager network, go out through a trunk, and terminate on a different Cisco Unified Communications Manager network. For CAR purposes, any outgoing call can be classified as an On Net call if it is configured as such in the CAR dial plan configuration window. See Configuring the Dial Plan section on page 3-2. Inbound calls that originate outside the Cisco Unified Communications Manager network, enter through a gateway, and go into the Cisco Unified Communications Manager network. Inbound calls that originate outside the Cisco Unified Communications Manager network, enter the Cisco Unified Communications Manager network through a gateway, and are transferred outbound from the Cisco Unified Communications Manager network through a gateway. All other outgoing calls, such as toll-free numbers or emergency calls such as 911. The total number of calls for each hour or day.
Long Distance
International
On Net
Incoming
Tandem
Others Total
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
11-23
Figure 11-17 displays sample output of the Traffic Summary Report results in PDF format.
Figure 11-17 Traffic Summary Report Results
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
11-24
OL-12483-01
Chapter 11
CAR Report Results Authorization Code Name Call Details Report Results
Field Orig. Dest. Orig. Date Time Duration (sec) Call Classification Authorization Level
Description The originating number from which the call was placed. The destination number to which the call was directed. The date and time that the call originated. The time, in seconds, that the call connected. The type of call (internal, incoming, on so on.) The authorization level for calls for each chosen authorization code name.
Figure 11-18 displays sample output of the Authorization Code Name Call Details report in PDF format.
Figure 11-18 Authorization Code Name Call Details Report
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
11-25
Field Orig. Dest. Orig. Date Time Duration (sec) Call Classification Authorization Code Name
Description The originating number from which the call was placed. The destination number to which the call was directed. The date and time that the call originated. The time, in seconds, that the call connected. The type of call (internal, incoming, and so on.) The authorization code name for each authorization level that you chose.
Figure 11-19 displays sample output of the Authorization Level Call Details report in PDF format.
Figure 11-19 Authorization Level Call Details Report
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
11-26
OL-12483-01
Chapter 11
Field Orig. Dest. Orig. Date Time Duration (sec) Call Classification
Description The originating number from which the call was placed. The destination number to which the call was directed. The date and time that the call originated. The time, in seconds, that the call connected. The type of call (internal, incoming, and so on.)
Figure 11-20 displays sample output of the Client Matter Code Details report in PDF format.
Figure 11-20 Client Matter Code Details Report
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
11-27
Table 11-18
Field Orig. Time Term. Time Duration Orig. Dest. Orig. Device Dest. Device Call Classification
Description Time at which the malicious call originated. Time at which the malicious call terminated. Total time of malicious call in seconds. Originating DN. Destination DN. Name of the originating device. Name of the destination device. Classification of the malicious call.
Figure 11-21 displays sample output of the Malicious Calls Detail report in PDF format.
Figure 11-21 Malicious Calls Detail Report
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
11-28
OL-12483-01
Chapter 11
Field Time/Day
Description Indicates the cumulative hours of the day(s), the days of the week, or the days of the month for the selected date range. Number of calls for each precedence level by time/day. Precedence level value of the call. Number of call legs per each precedence level. Percentage of calls per each precedence level.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
11-29
Figure 11-22 displays sample output of the Precedence Call Summary by Hour of Day report in PDF format.
Figure 11-22 Precedence Call Summary Report
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
11-30
OL-12483-01
Chapter 11
Description Details the five users who have incurred the highest charges for calls that occurred during the specified date range. See the Top N By Charge or Duration Report Results section on page 11-6 for details about this section of the system overview report. Details the five called numbers that have incurred the highest charges for calls during the specified date range. See the Top N By Charge or Duration Report Results section on page 11-6 for details about this section of the system overview report. Details the five calls that have incurred the highest charges for calls during the specified date range. See the Top N By Charge or Duration Report Results section on page 11-6 for details about this section of the system overview report. Details the five users who have spent the most time on calls during the specified date range. See Top N By Charge or Duration Report Results, page 11-6 for details about this section of the system overview report. Details the five called numbers that have been engaged in calls for the longest time during the specified date range. See the Top N By Charge or Duration Report Results section on page 11-6 for details about this section of the system overview report. Details the five longest calls for the specified date range. See the Top N By Charge or Duration Report Results section on page 11-6 for details about this section of the system overview report. Shows the volume of calls during the specified date range based on each hour of the day. If the date range is within one day, the system identifies the hour with the highest traffic volume (the BHCC number). See the Traffic Summary Report Results section on page 11-22 for details about this section of the system overview report.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
11-31
Table 11-20
Description Shows the volume of calls during the specified date range based on each day of the week. See the Traffic Summary Report Results section on page 11-22 for details about this section of the system overview report. Shows the volume of calls during the specified date range based on each day of the month. See the Traffic Summary Report Results section on page 11-22 for details about this section of the system overview report. Shows the number of calls that fell within each voice-quality category during the specified date range. See the QoS Summary Report Results section on page 11-18 for details about this section of the system overview report. Shows the summary of the call classification for each gateway along with the QoS, the number of calls, and the duration for each classification for the gateway during the specified date range. See the QoS by Gateways Report Results section on page 11-19 for details about this section of the system overview report.
Description The hour for the specified day that the error occurred. The total number of CDR data records that were not processed during loading into CAR due to an error. The total number of CDR data records that were successfully load into CAR. The percentage of failed CDR data records out of all the CDR data records to be loaded.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
11-32
OL-12483-01
Chapter 11
Figure 11-23 displays sample output of the CDR Error report in PDF format.
Figure 11-23 CDR Error Report
Description The date when the call went through the gateway. The time when the call went through the gateway. The time that the call terminated. The duration, in seconds, that the call was connected. The duration specifies the difference between the Dest Connect and the Dest Disconnect times.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
11-33
Table 11-22
Description The directory number from which the call was placed. The directory number to which the call was originally placed. If the call was not forwarded, this directory number should match the Final Destination number. If the call was forwarded, this field contains the original destination number of the call before it was forwarded. The codec code (compression or payload code) that the call originator used on its sending side during this call. This code may differ from the codec code that was used on its receiving side. The codec code (compression or payload code) that the destination used on its sending side during this call. This code may differ from the codec code that was used on its receiving side. The device name of the device that placed the call. For incoming and tandem calls, this field specifies the device name of the gateway. The device name of the device that received the call. For outgoing and tandem calls, this field specifies the device name of a gateway. For conference calls, this field specifies the device name of the conference bridge. QoS shows the voice-quality grade that was achieved for the calls. The QoS category that was experienced by the receiver of the call.
Orig. Codec
Dest. Codec
Orig. Device
Dest Device
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
11-34
OL-12483-01
Chapter 11
Figure 11-24 displays sample output of the Gateway Detail Report in PDF format.
Figure 11-24 Gateway Detail Report
The Gateway Summary report segregates calls for each call classification that the user selects and divides the calls based on QoS type.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
11-35
Table 11-23
Description Shows the type of call (internal, incoming, and tandem.) Shows a summary of the performance of the various gateways with the total number of calls for each voice-quality category. The parameters set in the Defining the Quality of Service (QoS) Values section on page 4-5 provide the basis for all voice-quality categories.
GoodQoS for these calls specifies the highest possible quality. AcceptableQoS for these calls, although slightly degraded, still falls within an acceptable range. FairQoS for these calls, although degraded, still falls within a usable range. PoorQoS for these calls was unsatisfactory. NAThese calls did not match any criteria for the established QoS categories.
Shows the total calls for the particular call classification. Shows the total duration for all the calls for the particular call classification.
Figure 11-25 displays sample output of the Gateway Summary Report in PDF format.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
11-36
OL-12483-01
Chapter 11
Figure 11-25
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
11-37
Field Time/Day
Description Time in one-hour blocks if you chose Hourly or one-day blocks if you chose weekly or monthly. The results show the utilization for each hour or day for the entire period that is shown in the from and to dates. Gateway, route group, route list, or route pattern utilization percentage. This field gives the estimated utilization percentage of the gateways or route groups or route lists or route patterns relative to the total number of calls that all the gateways put together can support at any one time.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
11-38
OL-12483-01
Chapter 11
Figure 11-26 displays sample output of the Gateway Utilization Report in PDF format.
Figure 11-26 Gateway Utilization Report
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
11-39
Figure 11-27 displays sample output of the Route/Hunt List Utilization report in PDF format.
Figure 11-27 Route/Hunt List Utilization Report
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
11-40
OL-12483-01
Chapter 11
Figure 11-28 displays sample output from the Route and Line Group Utilization report in PDF format.
Figure 11-28 Route and Line Group Utilization Report
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
11-41
Figure 11-29 displays sample output of the Route Pattern/Hunt Path Utilization report in PDF format.
Figure 11-29 Route Pattern/Hunt Path Utilization Report
Note
The report criteria include the type of conference (ad hoc and/or meet-me) and the From and To date range.
Table 11-25 Conference Call Detail Report Fields
Description Time at which conference started. Time at which conference ended. Time at which conference participants connected to conference.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
11-42
OL-12483-01
Chapter 11
Table 11-25
Field Disconnect Time Duration Directory Number Call Classification Device Name QoS
Table 11-26
Description Time at which conference participants disconnected from conference. Total time of conference. Directory number of participants. Call types of conference (internal, incoming, and so on.) Names of the conference devices that were used. Quality of service.
Conference Call Detail Summary Report Fields
Field Orig. Time Term. Time No. of Participants Duration Device Name
Description Time that the first participant enters the conference. Time that the last participant leaves the conference. Number of participants in the conference. Sum of the duration of individual participants in the conference in seconds. Names of the conference devices that were used.
Figure 11-30 displays sample output of the Conference Call Details Summary report in PDF format.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
11-43
Figure 11-30
Description Time in one-hour blocks if you chose Hourly or one-day blocks if you chose day of week or daily. Conference bridge utilization percentage. The conference bridge device that is used to hold conference calls. Either hardware or software conference bridge. The number of conferences that can be held at a time along with the number of people per conference.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
11-44
OL-12483-01
Chapter 11
Figure 11-31 displays sample output of the Conference Bridge Utilization report in PDF format.
Figure 11-31 Conference Bridge Utilization Report
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
11-45
Description Time in one-hour blocks if you chose Hourly or one-day blocks if you chose day of week or daily. Voice-messaging percentage. The sum of the maximum number of ports for all the gateways under the route patterns that are configured for the voice messaging systems and the entries in the Device table of Cisco Unified Communications Manager that have type Class as 8. The originating or destination device name as the gateways under the route patterns that are configured for the voice-messaging systems. The number of ports that the voice messaging gateway supports.
Number of Ports
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
11-46
OL-12483-01
Chapter 11
Figure 11-32 displays sample output of the Voice Messaging Utilization report in PDF format.
Figure 11-32 Voice Messaging Utilization Report
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
11-47
Understanding the Results for CDR Search, page 11-48 Media Information, page 11-49 CDR and CMR Dump Tables, page 11-49
Description This field specifies the serial or record number. This field specifies the type of call: simple, transfer, forward, pickup, conference, refer, replaces, or redirection. This field specifies the call identifiers that are associated with all the records for the entire call. This field specifies the node within the Cisco Unified Communications Manager cluster where the call originator/destination was registered at the time of the call. This field specifies the unique identifiers (within a cluster) to the originating/destination leg of a call. The calling number specifies the directory number where the call originated. The calling partition specifies the partition that is associated with the calling party. The called number specifies the directory number from which the call was initially placed and is the same as the Dest No when the call is not transferred or forwarded. The called partition specifies the partition that is associated with the called party. The destination number specifies the directory number where the call finally terminated and is the same as the called number when the call is not transferred or forwarded. The destination number partition specifies the partition that is associated with the destination number.
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
11-48
OL-12483-01
Chapter 11
Table 11-29
Description The last redirected number specifies the directory number from which the call was finally redirected. The last redirected number partition specifies the partition that is associated with the last redirected number. This field specifies the packets that were received or lost for the origination or destination leg of a call and a link to the media information. See the CDR and CMR Dump Tables section on page 11-49 for information about the CDR and CMR Dump tables. This field specifies a link to the CDR and CDR dump tables. This link allows the users to view the values in the CDR/CMR fields. See the CDR and CMR Dump Tables section on page 11-49 for information about the CDR and CMR Dump tables.
Media Info Orig Pkts Rcd Dest Pkts Rcd Orig Pkts Lost Dest Pkts Lost
Media Information
The media information table provides the following information. See Table 11-30.
Table 11-30 CDR Media Information
Description A unique identifier (within a cluster) for the originating leg of a call. A unique identifier (within a cluster) for the destination leg of a call. The media parameters MediaTransportAdd_Ip, PayLoadCapability, MediaCap_g723BitRate, Packets Sent, Octets Sent, Packets Received, Octets Received, Packets Lost, Jitter, Latency, QoS, VideoCap_Codec, VideoCap_Bandwidth, VideoCap_Resolution, VideoTransportAddress_IP, and VideoTransportAddress_Port The value for all the preceding parameters for the origination leg of the call. The value for all the preceding parameters for the destination leg of the call.
Origination Destination
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
11-49
Note
You can view the content of the voice quality metrics field, varVQMetrics, in the Origination CMR and Destination CMR fields.
Table 11-31 CDR and CMR Dump Tables
Description This field specifies the call detail record fields. Only a single set of fields for origination and destination exists. You can find the origination or destination CMR by using the leg IDs. If the leg IDs of the CMR match the Orig/Dest leg ID of the CDR, the following record represents Orig/Dest CMR. Only a single set of fields for origination and destination exists. You can find the origination or destination CMR by using the leg IDs. If the leg IDs of the CMR match the Orig/Dest leg ID of the CDR, the following record represents Orig/Dest CMR.
Destination CMR
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
11-50
OL-12483-01
INDEX
A
AAC calls
10-25 10-26
4-6
10-13
abandoned calls
B
barge scenarios base rate bill department
5-3 11-4 11-2 4-2 10-66
add incoming number prefix to CDR service parameter 2-3 ad hoc conference linking call scenarios CDR examples administrators, CAR alerts enabling or disabling, by mail
4-8 10-50 10-50 1-5 10-18
11-2
allowed CDRonDemand get_file_list queries per minute service parameter 2-3 allowed CDRonDemand get_file queries per minute enterprise parameter 2-3 application user
2-4 10-100
C
call control process call detail conference call detail, report results callIdentifier, CMR field name call information record types
10-103 10-5 10-86 10-97 10-87 11-42 2-2 10-2
authCodeDescription, CDR field name authenticate and show CAR pages authorization code name system report
6-17 6-17 1-14
authorizationLevel, CDR field name authorization level report automatic database purge
3-14 6-18
call monitoring CDR example call park pickup call park scenarios
10-61
10-62
10-61
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
IN-1
Index
10-42
call recording CDR example call release cause codes call scenarios, CDR
10-8 10-36
8-3 8-1
CDR search by user extension configuration Cisco IP Manager Assistant usage reports, described 5-11 Cisco IP Phone services report configuration
10-10 10-10
5-13
conference bridge utilization report conference call details configuration configuration, gateway described
10-112 1-2 7-1 3-5 5-3 10-40
7-15 7-14
calls with busy or bad destinations CDR examples calls with busy or bad destinations scenarios call termination CDR search by
8-4
call termination cause codes, Cisco-specific, table call termination cause codes, table call types QoS by
10-8 6-8 10-110
QoS report results by call types call usage for assistant-detail report results report results report results report results CAR administrators, managers, users assistant call usage configuration
11-10
disabling automatic database purge event log report output parameters event log report status gateway report
7-1, 7-8 3-15
3-14 3-16
export CDR/CMR records results generate report fields list of topics logging off
1-5 5-12 3-14 4-6 1-1 3-8
9-2
6-19 5-11
manager call usage configuration notification limits configuration precedence call summary QoS by call types report QoS by gateway report QoS default values QoS detail report
4-5 6-20
automatic database purge configuration call termination details, viewing CDR/CMR records configuration CDR error report CDR search by call precedence levels configuration malicious calls overview
1-12 8-1 8-7 8-6 6-22 6-22 8-5
4-8
6-8
6-6
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
IN-2
OL-12483-01
Index
call types
described
6-10 6-15
voice quality
QoS detail report configuration QoS parameter operators QoS parameters call types
6-9 6-1
traffic summary by extensions report traffic summary by extensions report configuration 6-14 traffic summary report
6-11
6-14
6-11 3-8
user reports
report configuration, described restoring database purge defaults restoring dial plan default values searching for users system configuration system overview report
5-15 1-6, 3-1
10-68
3-14
3-7
system overview report configuration system preferences parameters system reports overview
1-8 6-1 3-6
11-32
3-7 3-7
restoring the default load schedule search by cause for call termination search by gateway
8-3 8-1
system reports, described top N, described top N by charge call types report types top N by duration call types report types
5-7 5-8 5-5 5-6 5-4
8-4
11-48
2-2
top N by duration configuration top N by number of calls call types report types traffic reports
5-9 5-10
5-7
CDR analysis and reporting general information internationalization described logging off
2-1 2-6 1-6 1-13, 1-14
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
IN-3
Index
10-36 2-2
CMR Field Descriptions (Diagnostic), table CMR K-Factor data codec types, table
2-3 10-107 3-8
10-102
10-100 11-44
CDR Log Calls With Zero Duration Flag service parameter 2-2 CDR management CDR overview CDR processing
10-3 10-4
conference bridge utilization, report results conference call detail, report results conference calls
10-15 10-16 11-42
conference calls CDR examples conference calls scenarios conference drop any party
10-84 10-102 10-48 10-21
cdrRecordType, CDR field name cdrRecordType, CMR field name CDR repository CDRs understanding CDR values uninhibited loading manager call usage Cisco IP Phone services report configuration report results
11-16 10-30 5-13 3-8 1-1 10-2 10-4
conference linking
10-18
conference linking, removing a controller from linked conference 10-56 conference linking, removing a party from a linked conference 10-54 conference linking, removing the linked conference conference linking, using transfer or direct transfer configuration checklist CAR configuring conventions
1-15 6-19, 6-20, 8-6, 8-7 iii-xiii 4-7 1-11 10-58 10-52
customizing, reports for automatic generation customizing reports for automatic generation
10-112
D
daily charges, notification limits configuration daily reports scheduling
3-9 4-8
Cisco Unified Communications Manager Assistant call usage reports assistant call usage client matter code system report
6-16 10-101 5-12
database automatic purge configuration disabling automatic purge restoring purge defaults
2-3 3-14 3-13 10-96 10-96 10-85 3-14 6-16 6-16 10-70
clientMatterCode, CDR field name client matter code report client matter code reports client matter code scenarios CMC reports CMC scenarios CMR dump table
6-16 10-70 11-49
dateTimeDisconnect, CDR field name dateTimeOrigination, CDR field name dateTimeStamp, CMR field name department bill
10-104
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
IN-4
OL-12483-01
Index
detail
5-3 5-3
individual bill, report results QoS, report results QoS report details report
11-4 6-2 6-19 11-4 11-16
11-4
summary
department bill detail report results department bill detail, report results department bill summary report results
11-2 11-2 10-99
10-106
destCallTerminationOnBehalfOf, CDR field name destCause_value, CDR field name destDeviceName, CDR field name destDTMFMethod, CDR field name destIpAddr, CDR field name
10-91 10-90 10-102 10-94
10-104 10-106
10-98 10-101
automatic CAR and CDR database purge automatic database purge CDR loading document audience
iii-xii iii-xiii iii-xii 3-7 2-3 3-14
3-14
destMediaCap_maxFramesPerPacket, CDR field name 10-94 destMediaCap_payloadCapability, CDR field name destMediaTransportAddress_IP, CDR field name destMediaTransportAddress_Port, CDR field name destNodeId, CDR field name
10-91 10-93 10-95 10-95 10-94 10-93 10-94
iii-xi
documentation
iii-xiii 10-72 11-49
destPrecedenceLevel, CDR field name destRSVPAudioStat, CDR field name destRSVPideoStat, CDR field name destSpan, CDR field name
10-91
10-98
destVideoCap_Bandwidth, CDR field name destVideoCap_Codec, CDR field name destVideoCap_Resolution, CDR field name
E
enabling alerts by mail
4-8 4-7 1-11
destVideoTransportAddress_IP, CDR field name destVideoTransportAddress_Port, CDR field name detail department bill gateway
7-1 11-33 5-3 11-4
allowed CDRonDemand get_file queries per minute 2-3 CDRfile time interval cluster ID
2-3 2-3
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
IN-5
Index
enterprise parameters error CDR report event log generating event log report output status extension CDR search by
3-16 3-15 3-15 6-22
2-3
gateway summary, report results gateway summary report gateway utilization report
1-6 7-4
11-38
globalCallID_callManagerID, CDR field name globalCallID_callManagerId, CMR field name globalCallId_ClusterId, CDR field name
10-100 10-106
F
FAC scenarios filename format
10-70 10-2 10-92 10-97
I
identity management system error message idivert scenarios iLBC calls
10-25 10-26 10-64 2-5
finalCalledPartyNumberPartition, CDR field name finalCalledPartyUnicodeLoginUserID, CDR field name 10-92 flat file format forwarded calls
10-2 10-70
10-22 10-64
immediate divert (to voicemail) scenarios immediate divert CDR example IMS error message
2-5 10-22
G
gateway CDR search by QoS by
6-6 11-19 8-3 3-5
summary
individual bill detail, report results individual bill summary report results, report results department bill summary
voice quality
11-2 11-2
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
IN-6
OL-12483-01
Index
intercom
10-64
3-13
internationalization for CDR analysis and reporting interpreting personal assistant data in CDRs IP addresses
10-8
10-17
10-50
J
jitter, CMR field name
10-105 10-100
mobility call pickup example mobility follow me example mobility handin example mobility handout example mobility IVR example
10-80 10-81
10-82
K
K-Factor data in CMRs
10-107
10-80 10-76
L
lastRedirectDn, CDR field name
10-96 10-98 10-99
N
nodeId, CMR field name normal calls scenario notification limits
4-8 10-105 10-103
lastRedirectRedirectOnBehalfOf, CDR field name lastRedirectRedirectReason, CDR field name latency, CMR field name load CDR schedule configuration disabling CDR logging off CAR logon page
1-14 3-7 3-7 3-7 10-106 10-44
10-100
10-38
numberOctetsReceived, CMR field name numberOctetsSent, CMR field name numberPacketsLost, CMR field name numberPacketsSent, CMR field name number translations
10-6
10-104
O
OnBehalfOf codes, table
10-114
M
mailing a report malicious calls
5-14 3-1
10-9 iii-xii
10-99 10-98
OL-12483-01
IN-7
Index
origCause_location, CDR field name origCause_value, CDR field name origDeviceName, CDR field name origDTMFMethod, CDR field name origConversationID, CDR field name
10-87
P
parameters factoring time of day for rating factoring voice quality for rating
10-91 4-3 4-4
10-87 10-102
10-98 10-101
3-1 4-2
originalCalledPartyNumberPartition, CDR field name 10-97 original calling party on transfer origIpAddr, CDR field name
10-30 10-30
10-36 10-36
10-30
10-31 10-31
origMediaCap_maxFramesPerPacket, CDR field name 10-89 origMediaCap_payloadCapability, CDR field name origMediaTransportAddress_IP, CDR field name origMediaTransportAddress_Port, CDR field name origNodeId, CDR field name
10-85 10-88 10-90 10-90 10-88 10-88 10-88
personal assistant interceptor going to media port and transferring the call 10-31 personal assistant interceptor going to media port and transferring the call CDR example 10-31 personal assistant interceptor going to multiple destinations 10-33 personal assistant interceptor going to multiple destinations CDR examples 10-33 personal media interceptor going directly to destination CDR examples 10-32
origPrecedenceLevel, CDR field name origRSVPAudioStat, CDR field name origRSVPVideoStat, CDR field name origSpan, CDR field name
10-86
origVideoCap_Bandwidth, CDR field name origVideoCap_Codec, CDR field name origVideoCap_Resolution, CDR field name
10-89
10-12
10-89 10-89
origVideoTransportAddress_IP, CDR field name origVideoTransportAddress_Port, CDR field name overview automatic report generation CAR
2-1 5-3 4-6
precedence calls (MLPP) precedence calls scenarios preferences system configuration purge
3-6
3-14
5-1
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
IN-8
OL-12483-01
Index
Q
QoS default values defining values
4-5 4-5 4-8
8-3 8-1
Cisco Unified Communications Manager Assistant 5-12 client matter code department bill device
11-19 7-1 7-1 5-3 6-16
notification limits configuration QoS by call types, report results QoS by call types report QoS by gateway report QoS detail, report results QoS detail report call types
6-3 6-4, 6-13 6-9 11-18 6-8
11-20
gateway detail report gateway summary gateway utilization individual bill mailing
5-14 5-1 7-4
7-6
voice quality
6-8 6-6
QoS parameters, call types QoS summary, report results QoS summary report call types
6-5
7-8
7-12
R
rating engine, configuration rating parameters factoring time of day factoring voice quality recording calls scenarios redirected calls
10-11 10-74 4-3 4-4 4-2 4-1
traffic summary by extensions voice-mail utilization report configuration, CAR report results call usage for assistant-detail call usage for manager-detail CDR error
11-32 7-16 4-1
6-14
Redirection (3xx) call scenarios redirect reason codes, table refer calls
10-76 iii-xiii 10-75
10-113
11-10 11-11
call usage for assistant-summary call usage for manager-summary CDR search by user extension Cisco IP Phone services conference call detail
8-4 11-16
11-13 11-14
6-17
11-48
11-44
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
IN-9
Index
11-2
3-7
11-38
individual bill, detail individual bill detail QoS by gateway QoS detail
11-16
pattern utilization, report results route and line group utilization report route list utilization report
7-10
11-2
route pattern/hunt pilot utilization report route plan utilization report, configuring RSVP call scenarios
10-73
7-12 7-8
11-20
route group utilization route list utilization system overview top N by charge top N by duration traffic summary route pattern utilization
11-31 11-6 11-6
11-38
S
schedule CDR load configuration scheduling daily reports
3-9 3-11 3-10 3-7 3-7
11-38 11-38
11-8
traffic summary by extensions voice mail utilization Reports CAR report results reports
11-1 11-46
automatic generation configuration automatic report generation/alert enabling for automatic generation overview
1-14 3-9 3-11 3-10 11-31
1-11, 4-7
2-3
scheduling monthly
allowed CDRonDemand get_file_list queries per minute 2-3 call diagnostics enabled CDR Enabled Flag display FAC in CDR
3-13 2-2 2-2 2-2
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
IN-10
OL-12483-01
Index
show line group member DN in finalCalledPartyNumber CDR field short call CDR example short calls
10-11 10-11
by duration
2-3
5-7 11-6
11-8
show line group member DN in finalCalledPartyNumber CDR fields service parameter 2-3 speech-enabled directory dialing
10-30
speech-enabled simple ad hoc conferencing speech-enabled voice-mail browsing successful on-net call CDR examples successful on-net calls summary department bill gateway
7-4 11-35 5-3 10-9 10-30 10-9
11-6
configuration
11-6
QoS, report results traffic, report results traffic by extensions system, CAR
1-6
11-8
traffic by extensions, report results system overview, report results system overview report system preferences configuration
3-6 6-21 3-1 11-31
11-22 11-22
traffic summary by extensions, report results traffic summary by extensions report transferred calls
10-13 10-13 6-14
T
table, CDR and CMR dump talk-back intercom example time of day timestamps top N by charge
5-4 11-6 4-3 10-7 11-49 10-83
10-14
U
uninhibited loading of CDR values unsuccessful calls scenarios user reports, CAR
1-7 5-1 10-40 3-8
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide OL-12483-01
IN-11
Index
1-5
route group, report results route list, report results route pattern/hunt pilot voice-mail
7-16
11-38 7-12
11-46
V
varVQMetrics, CMR field name video calls
10-22 10-22 10-107
voice mail utilization, report results voice-mail utilization report voice quality
4-4 7-16
11-46
W
weekly reports scheduling
3-10 10-83
Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide
IN-12
OL-12483-01