Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 163 views

    08 Ehm 3

    Uploaded by

    Javier Melendez Roman
    Bowl performance shown below is corrected for materials, viscosity and construction. Bowl head of 91.09 m corresponds with 90. M head at discharge flange adjusted for elevation and friction losses.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    08 Ehm 3

    Uploaded by

    Javier Melendez Roman
    163 views5 pages
    Bowl performance shown below is corrected for materials, viscosity and construction. Bowl head of 91.09 m corresponds with 90. M head at discharge flange adjusted for elevation and friction losses.

    Original Title

    08ehm3

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Bowl performance shown below is corrected for materials, viscosity and construction. Bowl head of 91.09 m corresponds with 90. M head at discharge flange adjusted for elevation and friction losses.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    163 views5 pages

    08 Ehm 3

    Uploaded by

    Javier Melendez Roman
    Bowl performance shown below is corrected for materials, viscosity and construction. Bowl head of 91.09 m corresponds with 90. M head at discharge flange adjusted for elevation and friction losses.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5

    Pump size & type Based on curve no.

    Number of stages Customer Item number Service Vendor reference Date : : : : Wellford 0.1 : March 28, 2012 Capacity Head Specific gravity Pump speed

    : 08EHM : EC-2385 : 3 : : : : 50.0 l/s 90.00 m 0.999 3505 rpm

    CURVES ARE APPROXIMATE, PUMP IS GUARANTEED FOR ONE SET OF CONDITIONS, CAPACITY, HEAD, AND EFFICIENCY.

    Bowl performance shown below is corrected for materials, viscosity and construction.

    Bowl head of 91.09 m corresponds with 90.0 m head at discharge flange adjusted for elevation and friction losses.

    Copyright 2009 Flowserve. All rights reserved.

    FlowSelex v2.2

    1 of 5

    Hydraulic Datasheet
    Customer Customer reference Item number Service : : Wellford : : Operating Conditions Capacity Water capacity (CQ=1.00) Normal capacity Total Developed Head Water head (CH=1.00) NPSH available (NPSHa) NPSHa less NPSH margin Maximum suction pressure Rated suction pressure : : : : : : : : : 50.0 l/s 50.0 l/s 90.00 m 90.00 m 10.2 m 1.0 bara 1.0 bara Material column code Pump / Stages Based on curve no. Vendor reference Date : : : : 08EHM EC-2385 Wellford 0.1 March 28, 2012 / 3

    Materials / Specification : B30 Other Requirements Hydraulic selection : No specification Construction : No specification Test tolerance : Hydraulic Institute Level A Need Speed v's Torque curve for motor. Driver Sizing : Max Power(MCSF to EOC)with SF Performance data based on standard impeller

    Liquid Liquid type Liquid description Temperature / Spec. Gravity Viscosity / Vapor pressure : FreshWater : : 16 C / 0.999 : 1.0 cP / 0.02 bara Performance Pump speed : 3505 rpm NPSH required (NPSHr) : 7.0 m Minimum submergence : 355.6 mm Hydraulic power : 59.5 hp Efficiency (CE=1.00) : 78.2 % Power: (Rated / Max) : 76.1 hp / 80.1 hp Driver power : 101 hp / 75.0 kW Bowl Pressure : 12.8 bara (based on shut off and Rated specific Maximum allowable : 12.8 bara Bowl & column hydrotest : 15.8 bara Dischg Head Dischg Region MAWP : 12.2 bara Impeller diameter : Rated / Maximum / Minimum : 154.4 156.0 mm 144.5 mm Impeller dia ratio (rated/max) : 99.0 % Maximum head @ rated dia : 120.95 m Head rise to shut off : 32.8 % Total head ratio (rated/max) : 94.8 % Flow at BEP : 57.7 l/s Flow as % of BEP : 86.7 % Minimum continuous flow : 34.6 l/s Suction specific speed : 8410 US units Rated thrust (at Rated flow) : 5706.7 N Maximum thrust (at Shut off flow) : 7521.7 N Minimum thrust (at Runout flow) : 3131.7 N (A negative thrust value indicates an upthrust condition)

    CURVES ARE APPROXIMATE, PUMP IS GUARANTEED FOR ONE SET OF CONDITIONS, CAPACITY, HEAD, AND EFFICIENCY. Bowl performance shown below is corrected for materials, viscosity and construction.

    Bowl head of 91.09 m corresponds with 90.0 m head at discharge flange adjusted for elevation and friction losses.

    Copyright 2009 Flowserve. All rights reserved.

    FlowSelex v2.2

    2 of 5

    Construction Datasheet
    Customer Customer reference Item number Service : : Wellford : : Pump / Stages Based on curve no. Vendor reference Date : : : : 08EHM EC-2385 Wellford 0.1 March 28, 2012 Driver Information Manufacturer Power / SF (Req' / Act') Vertical shaft type Hollow shaft coupling Driver Type Frame size / Base dia Enclosure Duty type Efficiency type Hazardous area class Explosion 'T' rating Volts / Phase / Hz Amps-full load/locked rotor Motor starting Insulation Temperature rise Bearings / Lubrication Motor mounted by : : 75.0 kW / 101 hp : Hollow : : : 1.0 / 3

    Construction Bowl construction / lined : Threaded / Lined bowls Impeller type : Enclosed Impeller fastening : Colleted Suction strainer : Basket Column construction : Threaded Column flange spec'n : Taneytown Specification Column dia (nominal) : 152.4 mm Column pipe length : 0.15 m Column section length : 1524.0 mm Lineshaft brg spacing : 1524.0 mm Lineshaft diameter : 31.7 mm Lineshaft coupling type : Threaded coupling Lineshaft bearings, qty : 1 Lineshaft construction : Open Lineshaft lubrication : Pumpage Enclosing tube diameter : Disch size/rating/face : 6.00 in / : / : Pump/driver coupling : No coupling - hollow shaft "W" - Cast Above grade Discharge Materials Bowl Impeller Bowl bearing Bowl shaft Bowl wear ring Impeller wear ring Suction strainer Column Lineshaft Lineshaft bearing Lineshaft sleeve Discharge head Support plate Complete pump Mounting plate Driver(nett) Hydrostatic test Performance test NPSH test : : : : : : -

    : : : : : : : : : :

    / / Direct on line (DOL) / Customer / -

    / -

    : : 416 stainless steel

    Seal Information Arrangement : Size : Manufacturer / : Material code (Man'f/API) : Gland material : Auxiliary seal device : Seal flush plan : Seal flush construction : Paint and Package

    / / -

    : : -

    Pump paint Support plate paint Shipment type

    : : : -

    : Weights (Approx.) : : : Testing : None : : -

    Pit / sump depth Available well diameter Max dia below mtg surface

    : 1.08 m : 1.05 m : 2540.0 mm : 241.3 mm

    Notes Discharge flange is designed only to bolt up to an ANSI 125# flange but is not fully ANSI compliant. -

    Copyright 2009 Flowserve. All rights reserved.

    FlowSelex v2.2

    3 of 5

    Full Page GA Drawing

    All dimensions are in millimeters unless otherwise specified Customer Item number Service Customer PO # Vendor reference : : : : : Wellford 0.1 Pump size & type Pump speed / Stages Flow / Head Driver power / Frame Volts / Phase / Hz : 08EHM : 3505 rpm / 3 : 50.0 l/s / 90.00 m : 101 hp / 75.0 kW / : -/-/Drawing number Date Certified by / Date : Seal type Seal flush plan : : March 28, 2012 : : : FlowSelex v2.2

    Copyright 2009 Flowserve. All rights reserved.

    4 of 5

    Customer Item Number Service Vendor Reference Date

    : : : : Wellford 0.1 : March 28, 2012

    Pump size & type Based on curve no. Number of stages Capacity Head : 50.0 l/s : 90.00 m Specific gravity Pump speed : 0.999 : 3505 rpm

    : 08EHM : EC-2385 : 3

    Copyright 2009 Flowserve. All rights reserved.

    FlowSelex v2.2

    5 of 5

    You might also like