Tubes and Pipes

production programme
Tubes and pipes
Mittal Steel Ostrava a.s.
production programme
Tube Plant

TRADITIONAL PRODUCER
OF TOP QUALITY
STEEL PRODUCTS
The Tube Plant of Mittal Steel Ostrava a.s.

is a prominent producer of seamless pipes
in the Czech Republic.
Seamless pipes of diameters from 21.3
mm to 273.1 mm are manufactured
at two Stiefel Mills. Spiral weld pipes of
diameters from 323.9 mm to 820 mm
are manufactured on automatic welding
machines.
Tubes and pipes are manufactured in

compliance to ISO, EN, API, DIN, ASTM,
NF, BS, GOST, CSN and other standards.
Mittal Steel Ostrava a.s. has been
authorized to use the API monogram
on Oil Country Tubular Goods and line
pipes continuously since 1957.
contents
Plain-end seamless tubes and pipes
Seamless tubes suitable for screwing
(threaded tubes)
Flanged pipes
Oil country tubular goods (OCTG)
Spiral weld pipes
Tubular products
certification
The Tube Plant of Mittal Steel
Ostrava a.s. manufactures top
quality products, which have
been certified by a number of
reputable foreign and inland
institutions.
Plain-end seamless tubes and pipes

Dimensional standards
EN 10220:2002
ISO 4200:1991
CSN 42 5715:1981
CSN 42 5716:1981
DIN 2448:1981
GOST 8732:1978
ASME B36.10M:2004
KN 45 1103:19971
Seamless and welded steel tubes - General tables of dimensions and masses per unit length
Plain-end steel tubes, welded and seamless
Hot-rolled seamless steel tube
Hot-rolled seamless steel tube with small tolerances
Seamless steel tubes
Hot-rolled seamless steel pipes
Welded and hot-rolled seamless steel pipes
Type III casings - seamless for deep drilling - sizes
Technical delivery regulations for tubes and pipes of carbon steel

CSN 42 0250:1988
CSN 42 0165:1990
DIN 1629:1984
DIN 1630:1984
DIN 17 121:1984
ASTM A 53:2004 + ASME SA 53:2004
ASTM A 501:2001
ASTM A 519:2003
NF A 49-112:1987
GOST 8731:1974
EN 10216-1:2002 + A1:2004
EN 20224:2002
EN 10297-1:2003
Hot rolled seamless tubes of class 10 to 16 steels

Sheets and pipes of ferrite-pearlite steels with guaranteed impact properties at low temperatures
Seamless circular tubes of non-alloy steels with special quality requirements
Seamless circular tubes of non-alloy steels for extra-high requirements
Seamless structural steel circular tubes for structural engineering purposes
Seamless and welded black tubes suitable for zinc dipping
Hot-formed welded and seamless carbon steel structural tubing
Seamless carbon and alloy steel mechanical tubing
Plain-end seamless hot rolled steel tubes with guaranteed room temperature properties
and with special delivery conditions, all sizes that comply with DIN 2448
Hot-rolled seamless steel pipes
Seamless steel tubes for pressure purposes - Technical delivery conditions
- Part 1: Non-alloy steel tubes with specified room temperature properties
Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids
Seamless steel tubes for mechanical and general engineering purposes
For tubes and pipes of high-grade carbon steel - for boilers

CSN 42 0251:1989
DIN 17175:1979
ASTM A 106:2004 + ASME SA 106:2004
ASTM A 192:20021
ASTM A 210:20041
ASTM A 333:2004 + ASME SA 333:2001
ASTM A 530:2004 + ASME SA 530M:2001
ASTM A 450:2004
NF A 49 - 211:19891
EN 10208-1,2:1997, 1996
EN 10210-1,2:1994, 1997
EN 10216-2:2002 + A1:2004
EN 10216-3:2002 +A1:2004
KN 45 1108:19971
Seamless steel tubes with guaranteed properties at elevated temperatures

Seamless steel tubes for elevated temperatures quality grade I
Standard specification for seamless carbon steel pipe for high temperature service
Standard specification for seamless carbon steel boiler tubes for high-pressure service
Standard specification for seamless medium-carbon steel boiler and super heater tubes
Standard specification for seamless and welded steel pipes for low-temperature service
Standard specification for general requirements for specialized carbon and alloy steel pipe
Standard specification for seamless carbon steel pipe for high temperature service
Seamless plain-end tubes of non-alloy steels for the conveyance of liquids at elevated temperatures
Steel pipes for pipelines for combustible fluids
Hot finished structural hollow sections of no-alloy and fine grain steels
Seamless steel tubes for pressure purposes - Technical delivery conditions
- Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
Seamless steel tubes for pressure purposes Part 3 - Alloy and fine grain steel tubes
Casing type III - seamless for deep drilling - Technical delivery conditions
Subject to agreement, the Tube Plant is able to deliver plain-end seamless tubes of both carbon steel and high-grade carbon steel complying with other foreign
standards as long as their dimensions correspond to the dimensional range of tubes made in accordance with DIN 2448, ASME B36.10M and CSN 42 5715
or CSN 42 5716.
Tube dimensions2
EN 10220:2002 (ISO 4200:1991)
CSN 42 5715 (42 5716):1981
DIN 2448:1981, EN 10210-1,2:1994,1997
ASTM A 53:2004, ASTM A 106:2004,
ASTM A 333:2004
ASTM A 192:20021
ASTM A 210:20041
ASTM 519:2003
NF A 49 - 112:1987, NF A 49 - 211:19891
GOST 8732:1978
ASME B36.10 M:2004
See the relevant chart

21.3 - 127.0 mm, W.T. 2.3 - 20.0 mm
21.3 - 127.0 mm, W.T. 2.3 - 12.7 mm
21.3 - 273.1 mm, W.T. 2.77 - 18.26 mm
See the relevant chart, W.T. max. 20
21.3 - 273.1 mm, W.T. 2.3 - 20.0 mm
---------------------------------------------------------------------------------------------------1
The products in compliance with this standard are subject to prior agreement with 15/TT.
2
If agreed, unnormalized outside diameters can also be produced.
CSN 42 0250:1988
CSN 42 0251:1989
CSN 42 0165:1990
DIN 1629:1984
DIN 1630:1984
DIN 17121:19844
DIN 17175:1979 - Grade I
GOST 8731:1974
ASTM A 53:2004, ASTM A 106:2004
ASTM A 333:2004
ASTM A 192:20021
ASTM A 210:20021
ASTM A 501:2001
ASTM A 519:2003
NF A 49-112:1987
NF A 49-211:19891
EN 10208-1,2:19971, 19961
EN 10210-1,2:1994, 1997
EN 10216-1,2,3:2002 + A1:2004
EN 10297-1:2003
11 353.0, 11 353.1, 11 453.0, 11 453.1, 11 523.0, 11 523.13, 11 550.0, 11 550.1, 11 650.0, 11 650.1
12 021.1, 12 022.1
11 369.1, 11 503.11
St 37.0, St 44.0, St 52.0
St 37.4, St 44.4, St 52.4
RSt 37-2, St 37-3, St 44-2, St 44-3, St 52-3
St 35.8, St 45.8
10, 20, St2, St4
A, B, C
Gr. 1, Gr. 6
A
A1
without marking
MT 1010, MT 1015, MT 1020, 1010, 1012, 1015, 1017, 1020, 1518
TU E 220A, TU E 235A
TU E 220, TU E 250, TU E 275
with each grade 3 variations are possible:
- B (notch toughness testing at +20C)
- B1 (notch toughness testing at 0C)
- B2 (notch toughness testing at -20C)
L210GA, L235GA, L245GA, L290GA, L360GA, L245NB, L290NB1, L360NB
S235JRH, S275JOH, S275J2H, S355JOH, S355J2H, S275 NH1, S355NH1
P195TR1, P195TR2, P235TR1, P235TR2, P265TR2, P195GH, P235GH, P265GH
E235, E275, E315, E355, P355N, P355NH1, E275K21, E355K21
Lengths
Plain-end tubes of carbon or high-grade carbon steels are delivered in the following lengths:
Production lengths - 4 - 14 m, length is determined by the producer with respect to the technological potential
Approximate lengths - nominal length is chosen by the customer within the range of production lengths with the maximum tolerance of 500 mm
(in compliance with DIN 1629, DIN 17 121 and DIN 17 175).
Exact lengths - nominal length is chosen by the customer on the basis of the agreement with the producer.
Max. length of tubes:
< 60.3 mm
9.5 m
60.3 m
12.5 m in compliance with the technological potential
Pipe finish and end workmanship

Pipes are delivered with the following types of finish:
- scaled outside and inside
- with outside and/or inside zinc coating according to DIN EN 10240:1998 ( diameters up to 114.3 mm only and maximum lenght 7.1 m) - subject to prior agreement
- with outside protective paint for short-term protection
Pipes are delivered with the ends cut off perpendicularly to the pipe axis and de-burred. Other types of finish are subject to agreement with the producer.
Pipes are also delivered with the following types of insulation:
All combinations of the outside and inside finish including surface free of protection can be delivered.
Tube diameter
(mm)
Outside insulation
57.0 - 152.4
Inside insulation
Lengths
Producer of insulation
Extruded polyethylene coating with standard and

reinforced thickness
(DIN 30670:1991)
8 - 12.5 m
External supplier
159.0 - 273.1
Extruded polyethylene coating with standard and

reinforced thickness
(DIN 30670:1991 - N-n, N-v, S-n, S-v)2
8 - 18 m
219.0 - 273.1
Concrete-plastic coating
according to KN 42 0025:2003, event. FZM-N standard,
FZM-S special (for the protection of pipes with PE coating)
6 - 14 m
Cement mortar
thickness 5 - 13 mm
(DIN 2614:1990 - II-N)1
88.9 - 273.1
108.0 - 273.1
159.0 - 273.1
1
2
3
7 - 13 m
Bitumen or other varnish overcoat3

Protective bitumen varnish painting, bitumen coating
reinforced by 1 or 2 layers of fiberglass matt and PVC band
acc. to KN 420023:1994 or CSN 420022:1977

8 - 12.5 m
This type of insulation should be delivered off the winter period (i.e. approx. from 1st of April to 31st of November).
Wall thickness > 12 mm by the particular O.D. is subject to agreement.
Subject to agreement
Seamless tubes can also be delivered with the following types of coating:
Tubes of diameter 159 mm outside protective bitumen varnish painting, bitumen coating reinforced by 1 or 2 layers of fiberglass matt and PVC band
according to KN 42 0023:1994 or CSN 42 0022:1977.
Bundling
Pipes are tied by wire or tape whereas the number of ties is in compliance with the customers requirement.
Subject to agreement, the pipes can also be delivered in hexagonal bundles.
---------------------------------------------------------------------------------------------------1
The products in compliance with this standard are subject to prior agreement with 15/TT.
2
Can be delivered as normalized if agreed.
3
Can be delivered as normalized if agreed. Diameters 159 mm and greater with max. wall thickness 10 mm can only be delivered.
Plain-end seamless
tubes and pipes
Steel grades
Dimensional range, weight and maximum length according to

EN 10220:2002 (ISO 4200:1991), EN 10216:2002 + A1:2004
Wall thickness (mm)
Outside
diameter
(mm)
2.3
21.3
1.08/9.5
1.20/9.5
1.32/9.5
1.43/9.5
1.57/9.5
1.71/9.5
22
1.12/9.5
1.24/9.5
1.37/9.5
1.48/9.5
1.63/9.5
1.78/9.5
25
2.6
2.9
3.2
3.6
4.5
1.29/9.5
1.44/9.5
1.58/9.5
1.72/9.5
1.90/9.5
2.07/9.5
25.4
1.31/9.5
1.46 /9.5
1.61 /9.5
1.75 /9.5
1.94 /9.5
2.11 /9.5
26.9
1.40/9.5
1.56/9.5
1.72/9.5
1.87/9.5
2.07/9.5
2.26/9.5
2.49/9.5
30.
1.76 /9.5
1.91 /9.5
2.11 /9.5
2.34 /9.5
2.56 /9.5
2.83 /9.5
31.8
1.87/9.5
2.07/9.5
2.26/9.5
2.50/9.5
2.74/9.5
3.03/15
33.7
1.99/9.5
2.20/9.5
2.41/9.5
2.67/9.5
2.93/9.5
3.24/9.5
3.54/9.5
35
2.08/9.5
2.30/9.5
2.51/9.5
2.79/9.5
3.06/9.5
3.38/9.5
3.70/9.5
38
5.4
5.6
6.3
Weight (kg/m)/max. lengths (m)
2.27/9.5
2.51/9.5
2.75/9.5
3.05/9.5
3.35/9.5
3.72/9.5
4.07/9.5
40.
2.40/9.5
2.65/9.5
2.90/9.5
3.23/9.5
3.55/9.5
3.94/9.5
4.32/9.5
42.4
2.55/9.5
2.82/9.5
3.09/9.5
3.44/9.5
3.79/9.5
4.21/9.5
4.61/9.5
4.94/9.51
5.09/9.51
5.61/9.51
44.5 1
2.69/9.5
2.98/9.5
3.26/9.5
3.63/9.5
4.00/9.5
4.44/9.5
4.87/9.5
5.22/9.51
5.38/9.51
5.94/9.51
48.3
2.93/9.5
3.25/9.5
3.56/9.5
3.97/9.5
4.37/9.5
4.86/9.5
5.34/9.5
5.72/9.51
5.91/9.51
6.53/9.51
51.1
3.44/9.5
3.77/9.5
4.21/9.5
4.64/9.5
5.16/9.5
5.67/9.5
6.08/9.51
6.28/9.51
6.96/9.51
54.1
3.65 /9.5
4.01 /9.5
4.47 /9.5
4.93 /9.5
5.49 /9.5
6.04 /9.5
6.47/9.51
6.68/9.51
7.41/9.51
57
3.87/9.5
4.25/9.5
4.74/9.5
5.23/9.5
5.83/9.5
6.41/9.5
6.87/9.51
7.10/9.51
7.89/9.51
60.3
4.11/10
4.51/10
5.03/12
5.56/12
6.19/12
6.82/12
7.31/12
7.55/12
8.39/12
63.5 1
4.33/9.0
4.76/9.0
5.32/11.5
5.87/11.5
6.55/12
7.21/12
7.74/12
8.0/12
8.89/12
70.1
4.80/8.5
5.27/10
5.90/10
6.51/10
7.27/12
8.01/12
8.60/12
8.89/12
9.90/12
73
5.01/8.5
5.51/12
6.16/12
6.81/12
7.60/12
8.38/12
9.00/12
9.00/12
9.00/12
5.24/12.5
5.75/12.5
6.44/12.5
7.11/12.5
7.95/12.5
8.77/12.5
9.42/12.5
9.74/12.5
10.8/12.5
6.26/12.5
7.00/12.5
7.74/12.5
8.66/12.5
9.56/12.5
10.3/12.5
10.6/12.5
11.8/12.5
6.76/12.5
7.57/12.5
8.38/12.5
9.37/12.5
10.3/12.5
11.1/12.5
11.5/12.5
12.8/12.5
101.6
8.7/12
9.63/12
10.8/12
11.9/12
12.8/12
13.3/12
14.8/12
108
9.27/11.5
10.3/11.5
11.5/11.5
12.7/11.5
13.7/11.5
14.1/11.5
15.8/11.5
114.3
9.83/11.5
10.9/11.5
12.2/11.5
13.5/12
14.5/12
15.0/12
16.8/12.0
127
12.1/12
13.6/12
15.0/12
16.2/12
16.8/12
18.8/12
133
12.7/12
14.3/12
15.8/12
17.0/12
17.6/12
19.7/12
139.7
13.4/11.5
15.0/11.5
16.6/11.5
17.9/11.5
18.5/11.5
20.7/11.5
141.3
15.2/12
16.8/12
18.1/12
18.7/12
21.0/12
152.4
16.4/12.5
18.2/12.5
19.6/12
20.3/12
22.7/12
159
17.1/12.5
19.0/12.5
20.5/12.5
21.2/12.5
23.7/12.5
168.3
18.2/12.5
20.1/12.5
21.7/12.5
22.5/12.5
25.2/12.5
21.3/12.5
23.0/12.5
23.8/12.5
26.6/12.5
25.1/12
26.0/12.5
29.1/12.5
76.1
82.5
88.9
177.8
193.7
219.1
33.1/12.5
244.5
37.0/12
273.0
41.5/11.5
Ordering of the tubes is subject to prior agreement.

Grade in compliance with EN 10208-2, L415NB - diameters 159 mm and greater with max. wall thickness 10 mm can only be delivered.
1

EN 10220:2002 (ISO 4200:1991 continuation), EN 10216:2002 + A1:2004
Wall thickness (mm)
Outside
diameter
(mm)
7.1
60.3
9.32/12
10.3/12
11.2/12
63.5 1
9.88/12
11.0/12
11.89/12
70.0 1
11.0/12
12.8/12
13.3/12
73.0
11.5/12
12.8/12
13.95/11
76.1
12.1/12.5
13.4/12
14.6/12
16.3/12
82.5 1
13.2/12.5
14.7/12
16.0/12
17.9/12
88.9
14.3/12.5
16.0/12
17.4/12
19.5/12
21.1/11.5
23.6/10.5
101.6
16.5/12
18.5/12
20.1/12
22.6/11
24.6/10
27.5/8.5
108
17.7/11.5
19.7/11.5
21.5/11.5
24.2/10
26.3/9.5
29.4/8.5
114.3
18.8/12
21.0/12
22.9/12
25.7/12
28.0/12
31.4/12
127
21.0/12
23.5/12
25.7/12
28.9/12
31.5/12
133
22.0/12
24.7/12
27.0/12
30.3/12
139.7
23.2/12
26.0/12
28.4/12
141.3
23.5/12
26.3/12
152.4
25.4/12
159
8.8
10
11
12.5
14.2
16
17.5
20
25 1
35.1/11
38.8/101
41.8/91
46.5/81
35.3/11
39.5/9.5
43.8/8.51
47.3/81
52.8/91
33.1/11.5
37.1/10.5
41.6/9
46.2/81
49.9/9.51
55.7/6.51
32.0/10
34.9/10
39.2/11
43.9/10
48.8/91
52.7/81
59.0/71
28.8/12
32.4/12
35.3/12
39.7/11
44.5/10
49.4/8.51
53.4/81
59.8/71
28.5/12
31.2/12
35.1/12
38.4/11.5
43.1/10.5
48.4/9.5
53.8/8
58.2/7
65.3/6.5
71.3/6
26.6/12.5
29.8/12.5
32.6/12.5
36.7/12
40.1/12
45.2/12
50.7/11
56.4/10
61.1/9
68.6/8
74.9/7
82.6/6.5
168.3
28.2/12.5
31.6/12.5
34.6/12.5
39.0/12
42.7/12
48.0/12
54.0/10.5
60.1/9.5
65.1/8.5
73.1/7.5
80.0/7
88.4/6.5
177.8
29.9/12.5
33.5/12.5
36.7/12.5
41.4/12
45.2/12
51.0/12
57.3/11
63.8/9.5
69.2/8.5
77.8/7.5
85.2/7
94.2/6
193.7
32.7/12.5
36.6/12.5
40.1/12.5
45.3/12
49.6/12
55.9/12
62.9/12
70.1/11.5
76.0/11
85.7/9.5
93.9/8.5
104/7.5
219.1
37.1/12.5
41.6/12.5
45.6/12.5
51.6/12
56.5/12
63.7/12
71.8/11.5
80.1/10.5
87.0/9.5
98.2/8
108/7
120/6.5
244.5
41.6/12
46.7/12
51.2/12
57.8/12
63.3/12
71.5/11.5
80.6/10
90.2/8.5
98.0/8
111/7.5
122/7
135/6
273
46.6/12
52.3/12
57.3/12
64.9/12
71.1/12
80.3/11
90.6/9.5
101/8.0
110/7.5
125/6.5
137/6
26.2/81

1
22.2 1

CSN 42 5715:1981 a CSN 42 5716:1981
Wall thickness (mm)
Outside
diameter
(mm)
2.6
21.3
1.20/9.5
1.32/9.5
1.43/9.5
1.57/9.5
1.71/9.5
22.1
1.24/9.5
1.37/9.5
1.48/9.5
1.63/9.5
1.78/9.5
25.1
1.44/9.5
1.58/9.5
1.72/9.5
1.90/9.5
2.07/9.5
26.9
1.56/9.5
1.72/9.5
1.87/9.5
2.07/9.5
2.26/9.5
2.49/9.5
28
1.63/9.5
1.80/9.5
1.96/9.5
2.17/9.5
2.37/9.5
2.61/9.5
31.8
1.87/9.5
2.07/9.5
2.26/9.5
2.50/9.5
2.74/9.5
3.03/9.5
33.7
1.99/9.5
2.20/9.5
2.41/9.5
2.67/9.5
2.93/9.5
3.24/9.5
3.54/9.5
35.1
2.08/9.5
2.30/9.5
2.51/9.5
2.79/9.5
3.06/9.5
3.39/9.5
3.70/9.5
38
2.27/9.5
2.51/9.5
2.75/9.5
3.05/9.5
3.35/9.5
3.72/9.5
4.07/9.5
40.1
2.40/9.5
2.65/9.5
2.90/9.5
3.23/9.5
3.55/9.5
3.94/9.5
4.32/9.5
42.4
2.55/9.5
2.83/9.5
3.09/9.5
3.45/9.5
3.79/9.5
4.21/9.5
44.5 1
2.69/9.5
2.98/9.5
3.26/9.5
3.63/9.5
4.00/9.5
48.3
2.93/9.5
3.25/9.5
3.56/9.5
3.97/9.5
51.1
3.44/9.5
3.77/9.5
57
3.87/9.5
60.3
63.5
.1
2.9
3.2
5.6
6.3
4.61/9.5
5.09/9.51
5.61/9.51
6.12/9.51
4.44/9.5
4.87/9.5
5.38/9.51
5.94/9.51
6.48/9.51
4.37/9.5
4.86/9.5
5.34/9.5
5.71/9.51
6.53/9.51
7.14/9.51
4.21/9.5
4.64/9.5
5.16/9.5
5.67/9.5
6.28/9.51
6.96/9.51
7.61/9.51
4.25/9.5
4.74/9.5
5.23/9.5
5.83/9.5
6.41/9.5
7.10/9.51
7.89/9.51
9.65/9.51
4.11/10
4.51/10
5.03/12
5.55/12
6.19/12
6.82/12
7.55/12
8.39/12
9.2/12
4.33/9
4.76/9
5.32/11.5
5.87/11.5
6.55/12
7.21/12
8/12
8.89/12
9.75/12
4.5
70.1
4.80/8.52
5.27/12
5.90/12
6.51/12
7.27/12
8.02/12
8.89/12
9.90/12
10.89/12
76
5.24/12.5
5.75/12.5
6.43/12.5
7.10/12.5
7.94/12.5
8.76/12.5
9.72/12.5
10.8/12.5
11.9/12.5
82.5 1
6.26/12.52
7.01/12.5
7.74/12.5
8.66/12.5
9.56/12.5
10.6/12.5
11.8/12.5
13.0/12.5
89
6.78/12.52
7.58/12.5
8.39/12.5
9.38/12.5
10.4/12.5
11.5/12.5
12.9/12.5
14.2/12.5
102
8.74/12
9.67/12
10.8/12
12/12
13.3/12
14.9/12
16.4/12
108
9.27/11.52
10.3/11.5
11.5/11.5
12.7/11.5
14.1/11.5
15.8/11.5
17.4/11.5
114
9.82/11.52
10.9/11.5
12.2/11.5
13.4/12
15/12
16.7/12
18.5/12
127
12.1/12
13.6/12
15/12
16.8/12
18.8/12
20.7/12
133
12.7/122
14.3/12
15.8/12
17.6/12
19.7/12
21.8/12
140
13.44/11.52
15.0/11.5
16.7/11.5
18.6/11.5
20.8/11.5
23/12
152
16.4/12.5
18.1/12.5
20.2/12
22.6/12
25/12
159
17.2/12.5
19/12.5
21.2/12.5
23.7/12.5
26.2/12.5
168
18.2/12.5
20.1/12.5
22.4/12.5
25.1/12.5
27.8/12.5
21.3/12.5
23.8/12.5
26.7/12.5
29.5/12.5
26/12.5
29.2/12.5
32.3/12.5
219
33.1/12.5
36.6/12.5
245
37.1/12
41.1/12
273
41.5/11.5
45.9/12
194
178
3.6

The wall thickness is not included in the CSN, but it can be produced.

CSN 42 5715:1981 a CSN 42 5716:1981 (continuation)
Wall thickness (mm)
Outside
diameter
(mm)
60.3
10.3/12
11.4/12
63.5.1
11/12
12.1/12
70.1
12.2/12
13.5/12
76
13.4/12
14.9/12
16.3/12
82.51
14.7/12
16.3/11
17.9/12
89
16/12
17.8/12
19.5/12
21.2/11.5
23.6/10.5
102
18.5/12
20.6/12
22.7/11
24.7/10
27.6/9
108
19.7/11.5
22/11.5
24.2/10
26.3/9.5
29.4/8.5
114
20.9/12
23.3/12
25.7/12
27.9/12
31.3/12
34.5/11
127
23.5/12
26.2/12
28.9/12
31.5/12
35.3/11
133
24.7/12
27.5/12
30.3/12
33.1/11.5
140
26/12
29.1/12
32.1/12
152
28.4/12
31.7/12
159
29.8/12.5
168
10
11
12.5
14
16
18
20
221
251
38.7/101
42.6/91
46.4/81
39.0/9.5
43.8/8.51
48.4/81
52.8/71
37.2/10.5
41.1/9
46.2/8
51.1/7
55.7/6.51
35/12
39.3/11
43.5/10
48.9/8.51
54.2/7.51
59.2/71
35/12
38.3/11.5
43/10.5
47.7/9.5
53.7/8
59.5/7
65.1/6.5
70.5/6
33.3/12.5
36.8/12
40.2/12
45.2/12
50.1/11
56.4/10
62.2/9
68.6/8
74.3/7
82.6/6.5
31.6/12.5
35.3/12.5
39/12
42.6/12
47.9/12
53.2/10.5
60/9.5
66.6/8.5
73/7.5
79.2/7
88.2/6.5
178
33.5/12.5
37.5/12.5
41.4/12
45.3/12
51/12
56.6/11
63.9/9.5
71/8.5
77.9/7.5
84.6/6.5
94.3/6
194
36.7/12.5
41.1/12.5
45.4/12
49.6/12
56/12
62.2/12
70.2/11.5
78.1/11
85.8/9.5
93.3/8.5
104/6.5
219
41.6/12.5
46.6/12.5
51.5/12
56.4/12
63.7/12
70.8/11.5
80.1/10.5
89.2/9
98.2/8
107/7
120/6.5
245
46.8/12
52.4/12
58/12
63.5/12
71.7/11.5
79.8/10
90.4/8.5
101/8
111/7.5
121/7
136/6
273
52.3/12
58.6/12
64.9/12
71.1/12
80.3/11
89.4/9.5
101/8
113/7.5
125/6.5
136/6
25.9/81

DIN 2448:1981, NF A 49 - 112:1987, EN 10210-1, 2:1994, 1997
Wall thickness (mm)
Outside
diameter
(mm)
2.3 1
21.3
1.08/9.5
1.2/9.5
1.32/9.5
1.43/9.5
1.57/9.5
1.71/9.5
25. 2
1.29/9.5
1.44/9.5
1.58/9.5
1.72/9.5
1.9/9.5
2.07/9.5
26.9
1.4/9.5
1.56/9.5
1.72/9.5
1.87/9.5
2.07/9.5
2.26/9.5
2.49/9.5
31.8.1
1.87/9.5
2.07/9.5
2.26/9.5
2.5/9.5
2.74/9.5
3.03/9.5
33.7
1.99/9.5
2.2/9.5
2.41/9.5
2.67/9.5
2.93/9.5
3.24/9.5
3.54/9.5
38
2.27/9.5
2.51/9.5
2.75/9.5
3.05/9.5
3.35/9.5
3.72/9.5
4.07/9.5
42.4
2.55/9.5
2.82/9.5
3.09/9.5
3.44/9.5
3.79/9.5
4.21/9.5
44.5 1
2.69/9.5
2.98/9.5
3.26/9.5
3.63/9.5
4.00/9.5
48.3
2.93/9.5
3.25/9.5
3.56/9.5
3.97/9.5
51.1
3.44/9.5
3.77/9.5
57
3.87/9.5
60.3
2.6
2.9
3.2
3.6
4.5
5.6
63
6.3
4.61/9.5
5.09/9.51
5.39/9.51
5.61/9.51
4.44/9.5
4.87/9.5
5.38/9.51
5.71/9.51
5.94/9.51
4.37/9.5
4.86/9.5
5.34/9.5
5.91/9.51
6.27/9.51
6.53/9.51
4.21/9.5
4.64/9.5
5.16/9.5
5.67/9.5
6.28/9.51
6.67/9.51
6.96/9.51
4.25/9.5
4.74/9.5
5.23/9.5
5.83/9.5
6.41/9.5
7.10/9.51
7.56/9.51
7.89/9.51
4.11/9
4.51/10
5.03/12
5.55/12
6.19/12
6.82/12
7.55/12
8.05/12
8.39/12
63.5.1
4.33/9.5
4.76/9.5
5.32/10
5.87/10.5
6.55/11.5
7.21/11.5
8/11.5
8.52/11.5
8.89/11.5
70.1
4.80/8.5
5.27/12
5.90/12
6.51/12
7.27/12
8.02/12
8.89/12
9.48/12
9.90/12
73.2
5.01/8.5
5.51/12
6.16/12
6.81/12
7.6/12
8.38/12
9.31/12
9.93/12
10.4/12
76.1
5.24/12.5
5.75/12.5
6.44/12.5
7.11/12.5
7.95/12.5
8.77/12.5
9.74/12.5
10.39/12.5
10.8/12.5
82.51, 2
6.26/12.5
7.00/12.5
7.74/12.5
8.66/12.5
9.56/12.5
10.6/12.5
11.34/12.5
11.8/12.5
88.9
6.76/12.5
7.57/12.5
8.38/12.5
9.37/12.5
10.37/12.5
11.5/12.5
12.29/12.5
12.8/12.5
101.6
8.7/12
9.63/12
10.8/12
11.9/12
13.3/12
14.17/12
14.8/12
108
9.27/11.5
10.3/11.5
11.5/11.5
12.7/11.5
14.1/11.5
15.12/11.5
15.8/11.5
114.3
9.83/11.5
10.9/11.5
12.2/11.5
13.5/12
15/12
16.05/12
16.8/12
127
12.1/12
13.6/12
15/12
16.8/12
17.93/12
18.8/12
133
12.7/12
14.3/12
15.8/12
17.6/12
18.82/12
19.7/12
139.7
13.4/11.5
15/11.5
16.6/11.5
18.5/11.5
19.81/11.5
20.7/11.5
152.4.2
16.4/12.5
18.2/12.5
20.3/12
21.70/12
22.7/12
159
17.1/12.5
19/12.5
21.2/12.5
22.67/12.5
23.7/12.5
168.3
18.2/12.5
20.1/12.5
22.5/12.5
24.05/12.5
25.2/12.5
21.3/12.5
23.8/12.5
25.46/12.5
26.6/12.5
26/12.5
27.82/12.5
29.1/12.5
177.8.2
193.7
219.1
33.1/12.5
244.5
37/12
273
41.5/11.51

Ordering of the tubes except for the NF A 49 - 112 size range is subject to prior agreement.
The wall thickness according to EN 10210 only.
1
2
3

DIN 2448:1981, NF A 49 - 112:1987, EN 10210-1, 2:1994, 1997 (continuation)
Wall thickness (mm)
Outside
diameter
(mm)
7.1
60.3
9.32/12
10.3/12
11.2/12
63.5.1
9.88/12
10.9/12
11.89/12
73.2
11.5/12
12.8/12
13.95/11
76.1
12.1/12.5
13.4/12
14.6/12
16.3/12
82.5 1, 2
13.2/12.5
14.7/12
16.0/12
17.9/12
88.9
14.3/12.5
16/12
17.4/12
19.5/12
21.1/11.5
22.79/11
23.6/10.5
101.6
16.5/12
18.5/12
20.1/12
22.6/11
24.6/10
26.56/9.2
27.5/9
108
17.7/11.5
19.7/11.5
21.5/11.5
24.2/10
26.3/9.5
28.45/8.7
29.4/8.5
114.3
18.8/12
21/12
22.9/11
25.7/12
28/9.12
30.32/12
31.4/12
127
21/12
23.5/12
25.7/12
28.9/12
31.5/12
34.09/11.2
35.3/11
133
22/12
24.7/12
27/12
30.3/12
139.7
23.2/12
26/12
28.4/12
32/12
152.4.2
25.4/12
28.5/12
31.2/12
35.1/12
159
26.6/12.5
29.8/12.5
32.6/12.5
36.7/12
40.1/12
43.57/12
168.3
28.2/12.5
31.6/12.5
34.6/12.5
39/12
42.7/12
177.8.2
29.9/12.5
33.5/12.5
36.7/12.5
41.4/12
193.7
32.7/12.5
36.6/12.5
40.1/12.5
219.1
37.1/12.5
41.6/12.5
244.5
41.6/12
273
46.6/12
8.8
10
11
12 3
12.5
14.2
16
17.5
20
25 1
35.1/11
38.8/101
41.8/91
46.5/81
39.5/9.5
43.8/6.51
47.3/81
52.8/71
41.6/9
46.2/81
49.9/7.51
55.7/6.51
44.0/10
48.8/8.51
52.7/81
59.0/71
48.4/9.5
53.8/8
58.2/7
65.3/6.5
71.3/6
45.2/12
50.7/11
56.4/10
61.1/9
68.6/8
74.9/7
82.6/6.5
46.33/12
48/12
54/10.5
60.1/9.5
65.1/8.5
73.1/7.5
80.0/7
88.4/6.5
45.2/12
49.14/12
51/12
57.3/11
63.8/9.5
69.2/8.5
77.8/7.5
85.2/7
94.2/6
45.3/12
49.6/12
53.86/12
55.9/12
62.9/12
70.1/11.5
76/11
85.7/9.5
93.9/8.5
104/7.5
45.6/12.5
51.6/12
56.5/12
61.38/12
63.7/12
71.8/11.5
80.1/10.5
87/9.5
98.2/8
108/7
120/6.5
46.7/12
51.2/12
57.8/12
63.3/12
80.6/10
90.2/8.5
98/8
111/7.5
122/7
135/6
52.3/12
57.3/12
64.9/12
71.1/12
90.6/9.5
101/8
110/7.8
125/6.5
137/6
33.1/11.5 35.86/10.8 37.2/10.5

34.9/12
37.85/11
39.2/11
38.4/11.5 41.61/10.5 43.1/10.5
68.91/11.5 71.5/11.5
77.36/11
80.3/11
26.2/81

2
Ordering of the tubes except for the NF A 49 - 112 size range is subject to prior agreement.
3
The wall thickness according to EN 10210 only.
1
22.2 1

ASTM A 53:2004, ASTM A 106:2004, ASTM A 333:2004
Size
Outside diameter
Wall thickness
Weight
Max. length
Weight class
NPS
in
mm
1/2
0.840
21.3
3/4
1 14
1 12
2 12
3 12
1.050
1.315
1.660
1.900
2.375
2.875
3.500
4.000
4.500
in
mm
lb/ft
kg/m
0.109
2.77
0.85
1.27
STD
0.147
3.73
1.09
1.62
0.113
2.87
1.13
0.154
3.91
0.133
Schedule No.
Ft
40
31.17
9.5
XS
80
31.17
9.5
1.69
STD
40
31.17
9.5
1.48
2.20
XS
80
31.17
9.5
3.38
1.68
2.50
STD
40
31.17
9.5
0.179
4.55
2.17
3.24
XS
80
31.17
9.5
0.140
3.56
2.27
3.39
STD
40
31.17
9.5
0.191
4.85
3.00
4.47
XS
80
31.17
9.5
0.145
3.68
2.72
4.05
STD
40
31.17
9.5
0.200
5.08
3.63
5.41
XS
80
31.17
9.5
0.154
3.91
3.66
5.44
STD
40
37.73
12.0
0.218
5.54
5.03
7.48
XS
80
37.73
12.0
0.203
5.16
5.80
8.63
STD
40
39.37
12.0
0.276
7.01
7.67
11.41
XS
80
39.37
12.0
0.125
3.18
4.51
6.72
...
...
39.37
12.0
0.156
3.96
5.58
8.29
...
...
39.37
12.0
0.188
4.78
6.66
9.92
...
...
39.37
12.0
0.216
5.49
7.58
11.29
STD
40
41.01
12.5
0.250
6.35
8.69
12.93
...
...
41.01
12.5
0.281
7.14
9.67
14.40
...
...
41.01
12.5
0.300
7.62
10.26
15.27
XS
80
41.01
12.5
0.438
11.13
14.34
21.35
...
160
36.09
11.5
0.125
3.18
5.18
7.72
...
...
37.73
11.5
0.156
3.96
6.41
9.53
...
...
39.37
12.0
0.188
4.78
7.66
11.41
...
...
39.37
12.0
0.226
5.74
9.12
13.57
STD
40
39.37
12.0
0.250
6.35
10.02
14.92
...
...
39.37
12.0
0.281
7.14
11.17
16.63
...
...
39.37
12.0
0.318
8.08
12.52
18.63
XS
80
39.37
12.0
0.156
3.96
7.24
10.78
...
...
37.73
11.5
0.188
4.78
8.67
12.91
...
...
37.73
11.5
0.219
5.56
10.02
14.91
...
...
39.37
12.0
0.237
6.02
10.80
16.07
STD
40
41.01
12.5
0.250
6.35
11.36
16.90
...
...
41.01
12.5
0.281
7.14
12.67
18.87
...
...
41.01
12.5
0.312
7.92
13.97
20.78
...
...
41.01
12.5
0.337
8.56
15.00
22.32
XS
80
41.01
12.5
0.438
11.13
19.02
28.32
...
120
41.01
12.5
26.7
33.4
42.2
48.3
60.3
73.0
88.9
101.6
114.3

ASTM A 53:2004, ASTM A 106:2004, ASTM A 333:2004 (continuation)
Size
Outside diameter
Wall thickness
Weight
Max. length
Weight class
NPS
10
in
5.563
6.625
8.625
10.750
mm
141.3
168.3
219.1
273.1
in
mm
lb/ft
kg/m
0.156
3.96
9.02
13.41
...
0.188
4.78
10.80
16.09
0.219
5.56
12.51
0.258
6.55
0.281
Schedule No.
ft
...
37.73
11.5
...
...
39.37
12.0
18.61
...
...
39.37
12.0
14.63
21.77
STD
40
39.37
12.0
7.14
15.87
23.62
...
...
39.37
12.0
0.312
7.92
17.51
26.05
...
...
37.73
12.0
0.344
8.74
19.19
28.57
...
...
37.73
12.0
0.375
9.52
20.80
30.94
XS
80
36.09
12.0
0.500
12.70
27.04
40.28
...
120
36.09
11.0
0.188
4.78
12.94
19.27
...
...
39.37
12.0
0.219
5.56
15.00
22.31
...
...
39.37
12.0
0.250
6.35
17.04
25.36
...
...
39.37
12.0
0.280
7.11
18.99
28.26
STD
40
39.37
12.0
0.312
7.92
21.06
31.32
...
...
39.37
12.0
0.344
8.74
23.10
34.39
...
...
39.37
12.0
0.375
9.52
25.05
37.28
...
...
39.37
12.0
0.432
10.97
28.60
42.56
XS
80
39.37
12.0
0.500
12.70
32.74
48.73
36.09
11.0
0.562
14.27
36.43
54.20
...
120
32.80
10.0
0.719
18.26
45.39
67.56
...
160
26.25
8.0
0.250
6.35
22.38
33.31
...
20
39.37
12.0
0.277
7.04
24.72
36.81
...
30
39.37
12.0
0.312
7.92
27.73
41.24
...
...
39.37
12.0
0.322
8.18
28.58
42.55
STD
40
39.37
12.0
0.344
8.74
30.45
45.34
...
...
39.37
12.0
0.375
9.52
33.07
49.20
...
...
39.37
12.0
0.406
10.31
35.67
53.08
...
60
39.37
12.0
0.438
11.13
38.33
57.08
...
...
39.37
12.0
0.500
12.70
43.43
64.64
XS
80
39.37
12.0
0.562
15.09
51.00
75.92
...
100
36.09
11.0
0.719
18.26
60.77
90.44
...
120
31.17
9.0
0.250
6.35
28.06
42.09
20
39.37
12.0
0.279
7.09
31.23
46.49
...
...
39.37
12.0
0.307
7.80
34.27
51.01
...
30
39.37
12.0
0.344
8.74
38.27
56.96
...
...
39.37
12.0
0.365
9.27
40.52
60.29
STD
40
39.37
12.0
0.438
11.13
48.28
71.87
...
...
39.37
12.0
0.500
12.70
54.79
81.52
XS
60
36.09
10.5
0.594
15.09
64.49
95.97
...
80
31.17
8.5
0.719
18.26
77.10
114.70
...
100
23.95
7.0

GOST 8732:1978
Wall thickness (mm)
Outside
diameter
(mm)
2.5
2.8
3.5
4.5
5.5

25
1.39/9.5
1.53/9.5
1.63/9.5
1.86/9.5
2.07/9.5
28
1.57/9.5
1.74/9.5
1.85/9.5
2.11/9.5
2.37/9.5
2.61/9.5
32
1.82/9.5
2.02/9.5
2.15/9.5
2.46/9.5
2.76/9.5
3.05/9.5
38
2.19/9.5
2.43/9.5
2.59/9.5
2.98/9.5
3.35/9.5
3.72/9.5
4.07/9.5
42
2.71/9.5
2.89/9.5
3.32/9.5
3.75/9.5
4.16/9.5
4.56/9.5
4.95/9.51
5.33/9.51
45
2.91/9.5
3.11/9.5
3.58/9.5
4.04/9.5
4.49/9.5
4.93/9.5
5.36/9.51
5.77/9.51
57
4.00/10
4.62/10
5.23/10
5.83/10
6.41/10
6.99/9.51
7.55/9.51
60
4.22/10
4.88/12
5.52/12
6.16/12
6.78/12
7.39/12
7.99/12
9.15/12
10.26/12
63.5
4.48/9
5.18/11.5
5.87/11.5
6.55/12
7.21/12
7.87/12
8.51/12
9.75/12
10.95/12
73
5.18/8.5
6.00/12
6.81/12
7.60/12
8.39/12
9.16/12
9.91/12
11.39/12
12.82/12
76
5.40/12.5
6.26/12.5
7.10/12.5
7.94/12.5
8.76/12.5
9.56/12.5
10.36/12.5
11.91/12.5
13.42/12
89
7.38/12.5
8.39/12.5
9.38/12.5
10.36/12.5
11.33/12.5
12.28/12.5
14.16/12.5
15.98/12
102
8.50/12
9.67/12
10.82/12
11.96/12
13.09/12
14.21/12
16.40/12
18.55/12
108
10.26/11.5
11.49/11.5
12.70/11.5
13.90/11.5
15.09/11.5
17.44/11.5
19.73/11.5
114
10.85/11.5
12.15/11.5
13.44/12
14.72/12
15.98/12
18.47/12
20.91/12
127
12.13/12
13.60/12
15.04/12
16.48/12
17.90/12
20.72/12
23.48/12
133
12.7/12
14.26/12
15.78/12
17.29/12
18.79/12
21.75/12
24.66/12
140
15.04/11.5
16.65/11.5
18.24/11.5
19.83/12.5
22.96/12
26.04/12
146
15.70/12
17.39/12
19.06/12
20.72/11
24.00/12
27.23/11.5
152
16.37/12.5
18.13/12.5
19.87/121
21.60/121
25.03/121
28.41/121
159
17.15/12.5
18.99/12.5
20.82/12.5
22.64/12.5
26.24/12.5
29.79/12.5
20.10/12.5
22.04/12.5
23.97/12.5
27.79/12.5
31.57/12.5
25.57/12.5
27.82/12.5
32.28/12.5
36.70/12.5
31.52/12
36.60/12.5
41.63/12.5
245
41.09/12
46.76/12
273
45.92/12
52.28/12
168
194
219

GOST 8732:1978 (continuation)
Wall thickness (mm)
Outside
diameter
(mm)
10
11
12
14
16
17
18
20
76
14.87/11
16.3/12
89
17.76/12
19.48/12
21.16/11.5
22.82/11
102
20.64/12
22.69/11
24.69/10
26.67/9
108
21.97/11.5
24.17/10
26.31/9.5
28.45/8.5
114
23.31/12
25.65/12
27.94/12
30.23/11.5
127
26.19/12
28.85/12
31.47/12
34.08/12
133
27.52/12
30.33/12
33.10/12
35.86/10.5
140
29.08/12
32.06/12
35.00/12
37.88/11
146.1
30.41/11.5
33.54/11.5
36.62/11
39.66/10
152
31.74/121
35.02/12 1
38.25/11.51
41.43/10.5
47.65/9.5
53.66/8
56.60/7
59.48/6.5
65.11/6
159
33.29/12.5
36.75/12
40.15/12
43.50/12
50.06/11
56.43/10
59.53/9
62.59/9
68.56/8
168
35.29/12.5
38.97/12
42.59/12
46.17/12
53.17/10.5
59.98/9.5
63.31/8.5
66.59/8.5
73.00/7.5
194
41.06/12.5
45.38/12
49.64/12
53.86/12
62.15/12
70.24/11.5
74.21/11
78.13/11
85.82/7.5
219
46.61/12.5
51.54/12
56.43/12
61.26/12
70.78/11.5
80.10/10.5
84.69/9.5
89.23/9
98.15/8
245
52.38/12
57.95/12
63.48/12
68.95/11.5
79.76/10
90.36/8.5
95.59/8
100.77/8
110.98/7.5
273
58.60/12
64.86/12
71.07/121
77.24/111
89.42/9.5
101.41/81
107.33/7.5 1
113.20/7.5 1
124.79/6.51
Seamless tubes suitable for screwing (threaded tubes)

CSN 42 5710:1976
CSN 42 5711:1976
DIN 2440:1978
DIN 2441:1978
NF A 49-115:1978
UNI 8863:19871
EN 10255:2004
Steel tubes suitable for screwing - medium series

Steel tubes suitable for screwing - heavy series
Steel tubes, medium weight suitable for screwing
Steel tubes, heavy weight suitable for screwing
Hot-rolled seamless steel tubes suitable for threading
Seamless and welded carbon steel tubes, suitable for screwing (threads according to UNI ISO 7/1)
Non-alloyed steel tubes suitable for screwing
Dimensional range
According to CSN 42 5710:1976, DIN 2440:1978, CSN 42 5711:1976, DIN 2441:1978
Size
Outside diameter
Wall thickness
CSN 42 5710
DIN 2440
CSN 42 5711
DIN 2441
DN
NPS
mm
mm
Kg/m
mm
Kg/m
15
1/2
21.3
2.65
1.22
3.25
1.45
20
3/4
26.9
2.65
1.58
3.25
1.90
25
33.7
3.25
2.44
4.05
2.96
32
1 14
42.4
3.25
3.14
4.05
3.83
40
1 12
48.3
3.25
3.61
4.05
4.42
50
60.3
3.65
5.10
4.50
6.19
65
2 12
76.1
3.65
6.51
4.50
7.95
80
88.9
4.05
8.47
4.85
10.05
90
3 12
101.6
4.05
9.72
4.85
11.57
100
114.3
4.50
12.19
5.40
14.50
125
139.7
4.85
16.13
5.40
17.89
According to NF A 49-115:1978, EN 10255:2004

Size
DN
Outside diameter
NPS
Wall thickness
Middle series
mm
Heavy series
mm
Kg/m
mm
Kg/m
15
1/2
21.3
2.6
1.20
3.2
1.43
20
3/4
26.9
2.6
1.56
3.2
1.87
25
33.7
3.2
2.41
4.0
2.93
32
1 14
42.4
3.2
3.09
4.0
3.79
40
1 12
48.3
3.2
3.56
4.0
4.37
50
60.3
3.6
5.03
4.5
6.19
65
2 12
76.1
3.6
6.44
4.5
7.95
80
88.9
4.0
7.57
4.9 (5.0)
10.15 (10.35)
90
3 12
101.6
4.0
9.63
4.9
11.69
100
114.3
4.5
12.19
5.4
14.50
125
139.7
4.5 (5.0)
15.00 (16.61)
5.4
17.89
The data in brackets are the sizes according to EN 10255.
According to UNI 8863:1987
Size
DN
()
(mm)
Wall thickness
(mm)
Weight
Kg/m
15
1/2
21.3
2.3
1.08
20
3/4
26.9
2.3
1.40
25
33.7
2.9
2.20
32
1 14
42.4
2.9
2.82
40
1 12
48.3
2.9
3.25
50
60.3
3.2
4.51
65
2 12
76.1
3.2
5.75
80
88.9
3.6
7.57
100
114.3
4.0
10.88
Middle series
Size
DN
()
(mm)
Wall thickness
(mm)
Weight
Kg/m
15
1/2
21.3
2.6
1.20
20
3/4
26.9
2.6
1.56
25
33.7
3.2
2.41
32
1 14
42.4
3.2
3.09
40
1 12
48.3
3.2
3.56
50
60.3
3.6
5.03
65
2 12
76.1
3.6
6.44
80
88.9
4.0
8.38
100
114.3
4.5
12.19
125
139.7
5.0
16.61
Heavy series
Size
DN
()
(mm)
Wall thickness
(mm)
Weight
Kg/m
15
1/2
21.3
3.2
1.43
20
3/4
26.9
3.2
1.87
25
33.7
4.0
2.93
32
1 14
42.4
4.0
3.79
40
112
48.3
4.0
4.37
50
60.3
4.5
6.19
65
2 12
76.1
4.5
7.95
80
88.9
5.0
10.35
100
114.3
5.4
14.50
125
139.7
5.4
17.89
Wall thickness tolerance: -12.5% of NWT/ +10% of tube weight (applicable to all series).
Steel grades
Seamless tubes suitable for screwing are delivered in compliance with CSN 42 5710:1976 and CSN 42 5711 in grades 11 353.0, 11 353.1 and in compliance
with DIN 2240:1978 and DIN 2441:1978 in grade St 33 (DIN 17100:1980). Tubes manufactured in compliance with NF A 49 - 115:1978 are delivered in
grade TU 34-1, in compliance with UNI 8863:1987 in grade Fe 330, and in compliance with EN 10255:2004 in grade S195T.
Lengths
Tubes are delivered in short lengths. Precise lengths are subject to prior agreement with the producer.
Pipe finish and end workmanship

Tubes suitable for screwing are delivered with the surface in conformity to the customers requirements:
- scaled inside and outside
- with outside and/or inside zinc coating1
- with outside protective paint for short-term protection
Tubes are delivered with plain ends only.
Bundling and method of delivery

The method is the same as that of the plain-end tubes of corresponding lengths.
----------------------------------------------------------------------------1
Subject to agreement (with external maker)
Seamless tubes suitable

for screwing (threaded tubes)
Light series
Flanged pipes
Flanged pipes are manufactured in conformity to the following standards:
With double bordering and loose flanges for PN 10, 16, 25, 40 according to KN 42 5792:1995. The pipes used for manufacture of flanged pipes in accordance
with KN comply with CSN 42 5715:1981 and CSN 42 0250:1988.
Dimensions and weights of pipe for PN 10, 16, 25, 40 (KN 42 5792:1995)
Tube
Flange
Screw holes
Weight
PN
DN
D4 x t
D3
b = 2t
D1
D2
Number
Thread
Plain-end
pipe
kg/m
2 flanges
2 borders
kg
10
--16
80
89 3.6
113 135
7.2
94
200
(195)
160
18
18
8
(4)
M16
7.58
7.72
(7.56)
10
--16
100
108 4
135 155
113
220
(215)
180
18
18
M16
10.3
9.26
(8.78)
10
--16
150
159 4.5
191 212
164
285
(280)
240
18
22
(23)
M20
17.2
14.64
(13.94)
295
20
22
(23)
8
--12
M20
33.1
24.48
(23.48)
10
--16
200
219 6.3
245 268
12.6
225
340
(335)
25
--40
80
89 3.6
113 135
7.2
94
200
(195)
160
24
18
M16
7.58
10.05
(9.47)
25
--40
100
108 4
135 155
113
235
(230)
190
24
22
(23)
M20
10.3
13.68
(12.88)
25
--40
150
159 4.5
191 212
164
300
250
30
26
(27)
M24
17.2
25.58
(25.43)
25
200
219 6.3
278
12.6
225
360
310
30
26
(27)
12
M24
33.1
35.7
(35.46)
The meaning of D1, D2, D3, etc. is given in the above mentioned standard KN 42 5792.
Material data
Pipes:
Loose flanges:
both types of flanged pipes are made of steel grade 11 353.0 or .1

delivered either forged in steel grade 11 373, 11 375 or cast steel.
Finish
Flanged pipes with double bordering on both ends are delivered with black surface.
Another type of finish is subject to agreement.
Flanged pipes are delivered without connection screws and packing.
Length
Flanged pipes are delivered in:
- limited lengths - most frequently delivered in 4 - 6 m
- approximate lengths with tolerance of 500 mm or in the range of 1000 mm
- exact lengths (exceptional requirement by the customer) with tolerance of +100/-0 mm
Surface
Flanged pipes with double bordering are delivered with scaled surface. Another type of surface finish is subject to prior agreement.
24.44
(23.48)
Flanged pipes
Oil Country Tubular Goods (OCTG)

Grade Range
Casing and tubing are delivered according to API Spec 5CT, drill pipe according to API Spec 5D, and line pipe according to API Spec 5L.
Type
Casing
API Specification
Version of API Specification
Grade
2nd edition, 1989
C75-2
7th edition, 2001
H40, J55, K55, N80-12, N80-Q2

M651, L80-1, C95
P110
Q1251
Spec 5CT
High Collapse5
NH L80 HC, NH C95 HC, NH P110 HC
Tubing
Spec 5CT
7th edition, 2001
H40, J55, N80-12, N80-Q2

L80-1, C951, 4
P1101
Drill Pipe
Spec 5D
5th edition 2002
E75, X95, G105
Line Pipe
(seamless)6
Spec 5L
43rd edition, 2004
PSL 1: A, B, X42, X46, X521, X561, X601, 7

PSL 23 : B, X42, X46, X521, X561, X601, 7
Deliveries of the grades are subject to prior agreement.

Delivered by the producers option or by agreement with the customer
Only grades B and X42 in sizes 114.3 and higher
4
Without monogram API (C95 is not covered by API Spec 5CT for tubing, but can be delivered if agreed by the producer.)
5
Subject to agreement, resistance to outside pressure collapsing incl. High Collapse testing can be guaranteed - see the relevant table.
6
Line Pipe with spiral weld - see the following chapter Spiral-weld pipes
7
Only diameters 6 5/8 and greater, wall thickness see the detailed table of dimensions for Line Pipe.
1
2
3
The size-wise specifications of oil country tubular goods of the above grades are stated in the dimension tables.
Casing according to API Spec 5CT (8th edition, 2005)

Dimensional range, weight, grade
in
4 1/2
5 /2
1
6 5/8
7 /8
5
8 /8
5
9 5/8
10 3/4
mm
114.30
127.00
139.70
168.28
177.80
193.68
219.08
244.48
273.05
Wall thickness
in
mm
0.205
0.224
Nominal weight
of threaded pipe
with coupling
Max. length
Grade 3
Type of thread4
lb/ft
kg/m
range
5.21
9.50
14.14
H, J, K
short
5.69
10.50
15.63
J, K
short, buttress
0.250
6.35
11.60
17.26
J, K, N, L, C, P
short, long, buttress
0.290
7.37
13.50
20.09
N, L, C, P
long, buttress
0.337
8.56
15.10 1
22.47
long, buttress
0.220
5.59
11.50
17.11
J, K
short
0.253
6.43
13.00
19.35
J, K
short, long, buttress, HSC2
0.296
7.52
15.00 1
22.32
J, K, L, N, C, P
0.362
9.19
18.00
26.79
N, L, C, P
long, buttress, HSC2
0.244
6.20
14.00
20.83
H, J, K
short
0.275
6.99
15.50 1
23.07
J, K
short, long, buttress, HSC
0.304
7.72
17.00
25.30
J, K, N, L, C, P
0.361
9.17
20.00 1
29.76
N, L, C, P
long, buttress, HSC
0.415
10.54
23.00 1
34.23
N, L, C, P
long, buttress, HSC
0.288
7.32
20.00
29.76
H, J, K
0.352
8.94
24.00
35.72
J, K, N, L, C, P
0.417
10.59
28.00 1
41.67
N, L, C, P
0.475
12.07
32.00
47.62
N, L, C, P
0.272
6.91
20.00
29.76
H, J, K
short
0.317
8.05
23.00 1
34.23
N, L, J, K, C
0.362
9.19
26.00
38.69
J, K, N, L, C, P
0.408
10.36
29.00 1
43.16
N, L, C, P
long, buttress, HSC
0.453
11.51
32.00 1
47.62
N, L, C, P
long, buttress, HSC
0.498
12.65
35.00
52.09
N, L, C, P
long, buttress, HSC
0.300
7.62
24.00
35.72
short
0.328
8.33
26.40
39.29
J, K, N, L, C
0.375
9.53
29.70
44.20
N, L, C, P
0.430
10.92
33.70 1
50.15
N, L, C, P
0.500
12.70
39.00
58.04
N, L, C, P
0.304
7.72
28.00
41.67
short
0.352
8.94
32.00 1
47.62
H, J, K
0.400
10.16
36.00
53.57
J, K, N, L, C
0.450
11.43
40.00
59.53
N, L, C, P
0.500
12.70
44.00 1
65.48
N, L, C, P
0.352
8.94
36.00
53.57
H, J, K
0.395
10.03
40.00
59.53
J, K, N, L, C
0.435
11.05
43.50 1
64.74
N, L, C, P
0.472
11.99
47.00
69.94
N, L, C, P
0.545
13.84
53.50
79.61
N, L, C, P
0.350
8.89
40.50
60.27
J, K
short, buttress
Subject to agreement, the pipes can also be delivered with a gastight connection.
2
Delivery is subject to prior agreement.
3
Subject to agreement, grade M65 according to 7th edition of API Spec 5CT can also be delivered.
4
With all types of buttress thead also Special Clearence (SC) workmanship
1
Subject to agreement, High Collapse testing can be conducted for the grades stated in the following table.
Subject to agreement, casing according to GOST 632:1980, O. D. 5 34, wall thickness 6.5, 7.0, 7.7, 8.5, 9.5, 10.7 mm can be delivered.
Oil Country Tubular

Goods (OCTG)
Outside diameter
High Collapse - Casing according to API Spec 5CT (8th edition, 2005)
Nominal outside
diameter
in
4 12
5 12
6 5/8
7 5/8
8 5/8
9 /8
5
Nominal wall
thickness
Nominal
weight
Proportion
Design of collapse pressure

NH L80 HC
NH C95 HC
NH P110 HC
mm
in
mm
lb/ft
D/t
psi
MPa
psi
MPa
psi
MPa
114.30
0.205
5.21
9.50
21.94
4 860
33.5
5 340
36.8
5 490
37.9
114.30
0.224
5.69
10.50
20.09
5 960
41.1
6 650
45.9
6 960
48.0
114.30
0.250
6.35
11.60
18.00
7 350
50.6
8 390
57.8
9 050
62.4
114.30
0.290
7.37
13.50
15.51
9 160
63.2
10 690
73.7
11 970
82.5
114.30
0.337
8.56
15.10
13.35
11 040
76.1
13 000
89.6
14 820
102.2
127.00
0.220
5.59
11.50
22.72
4 450
30.7
4 870
33.6
4 980
34.3
127.00
0.253
6.43
13.00
19.75
6 180
42.6
6 920
47.7
7 260
50.1
127.00
0.296
7.52
15.00
16.89
8 130
56.0
9 390
64.7
10 310
71.1
127.00
0.362
9.19
18.00
13.82
10 600
73.1
12 460
85.9
14 160
97.6
139.70
0.244
6.20
14.00
22.53
4 550
31.4
4 980
34.3
5 100
35.2
139.70
0.275
6.98
15.50
20.01
6 010
41.4
6 710
46.3
7 020
48.4
139.70
0.304
7.72
17.00
18.10
7 280
50.2
8 310
57.3
8 940
61.7
139.70
0.361
9.17
20.00
15.23
9 380
64.7
10 960
75.6
12 310
84.9
139.70
0.415
10.54
23.00
13.25
11 140
76.8
13 110
90.4
14 960
103.1
168.28
0.288
7.32
20.00
22.99
4 320
29.8
4 710
32.5
4 820
33.2
168.28
0.352
8.94
24.00
18.82
6 790
46.8
7 680
52.9
8 170
56.4
168.28
0.417
10.59
28.00
15.89
8 870
61.1
10 320
71.2
11 500
79.3
168.28
0.475
12.06
32.00
13.95
10 480
72.2
12 310
84.9
13 980
96.4
177.80
0.272
6.91
20.00
25.73
3 180
21.9
3 440
23.7
3 480
24.0
177.80
0.317
8.05
23.00
22.09
4 780
33.0
5 250
36.2
5 390
37.2
177.80
0.362
9.19
26.00
19.35
6 440
44.4
7 240
49.9
7 650
52.7
177.80
0.408
10.36
29.00
17.16
7 930
54.7
9 140
63.0
9 990
68.9
177.80
0.453
11.51
32.00
15.45
9 210
63.5
10 750
74.1
12 050
83.1
177.80
0.498
12.65
35.00
14.06
10 380
71.6
12 190
84.1
13 840
95.4
193.68
0.300
7.62
24.00
25.42
3 290
22.7
3 560
24.5
3 610
24.9
193.68
0.328
8.33
26.40
23.25
4 190
28.9
4 570
31.5
4 670
32.2
193.68
0.375
9.52
29.70
20.34
5 800
40.0
6 460
44.5
6 730
46.4
193.68
0.430
10.92
33.70
17.74
7 530
51.9
8 620
59.5
9 340
64.4
193.68
0.500
12.70
39.00
15.25
9 370
64.6
10 950
75.5
12 290
84.8
219.08
0.304
7.72
28.00
28.38
2 400
16.6
2 580
17.8
2 610
18.0
219.08
0.352
8.94
32.00
24.51
3 640
25.1
3 950
27.2
4 010
27.7
219.08
0.400
10.16
36.00
21.56
5 070
35.0
5 590
38.5
5 760
39.7
219.08
0.450
11.43
40.00
19.17
6 560
45.2
7 390
51.0
7 830
54.0
219.08
0.500
12.70
44.00
17.25
7 870
54.3
9 060
62.5
9 890
68.2
244.48
0.352
8.94
36.00
27.35
2 670
18.4
2 880
19.9
2 910
20.1
244.48
0.395
10.03
40.00
24.37
3 690
25.5
4 010
27.6
4 070
28.1
244.48
0.435
11.05
43.50
22.12
4 760
32.8
5 220
36.0
5 370
37.0
244.48
0.472
11.99
47.00
20.39
5 770
39.8
6 420
44.3
6 690
46.1
244.48
0.550
13.84
53.50
17.66
7 580
52.2
8 690
59.9
9 420
65.0
Note : psi x 0.006894757 = MPa
Tubing according to API Spec 5CT (8th edition, 2005)

Outside
diameter
in
Nominal weight
of threaded pipe
with coupling
Wall thickness
Max. length
Grade
End workmanship 5
mm
in
mm
lb/ft
kg/m
range
48.26
0.145
3.68
2.75
4.09
non upset
0.200
5.08
3.65
5.43
external upset
2 3/8
60.32
0.167
4.24
4.00 1
5.95
2, 3
non upset
0.190
4.83
4.60
6.85
2, 3
non upset
0.190
4.83
4.70
6.99
2, 3
0.217
5.51
6.40
9.52
2, 3
J, N , P, L
non upset
0.217
5.51
6.50
9.67
2, 3
J, N3, L
external upset
0.216
5.49
7.70
11.46
2, 3
J, N , L
non upset
0.254
6.45
9.20 1
13.69
2, 3
J, N3, L, P
non upset
0.254
6.45
9.30
13.84
2, 3
J, N , L
external upset
0.289
7.34
10.20 1
15.18
2, 3
J, N3, L
non upset
0.375
9.52
12.70
18.90
2, 3
N , L, P
non upset
0.375
9.52
12.95
19.27
2, 3
N ,L
external upset
0.226
5.74
9.50 1
14.14
2, 3
J, N3, L
non upset
0.262
6.65
11.00
16.37
2, 3
J, N , L
external upset
0.330
8.38
13.20 1
19.64
2, 3
L4
non upset
0.415
10.54
16.10
23.96
non upset
0.271
6.88
12.60 1
18.75
2, 3
J, N3, L
non upset
0.271
6.88
12.75
18.97
2, 3
J, N , L
external upset
1.9
2 /8
73.02
3 /2
88.90
101.60 2
4 1/2
114.30
external upset
3
3
3
Subject to agreement, the pipes can also be delivered with a gastight connection.
2
Delivery is subject to prior agreement.
3
Delivered as grade N80-1 or N80-Q by the producers option or by agreement with the customer.
4
Plain ends only.
5
With all types of external upset ends with joints of outside diameter 2 3/8 - 3 1/2 also Special Clearence (SC) workmanship
1
Drill Pipe according to API Spec 5D, 5th edition, 2002

Outside
diameter
in
Wall thickness
Weight of pipe
Max. length
Grade
End workmanship4
E, X, G
EU
15.49
E, X, G
EU
14.14
19.81
23.09
2
2
2
E
E, X, G
E1, X2, G2
EU nebo IEU
20.83
EU
22.32
29.76
EU nebo IEU
29.05
30.10
E, X, G
IEU
mm
in
mm
lb/ft
kg/m
range
2 3/8 1
60.3
0.280
7.11
6.65
9.90
2 /8
73.0
0.362
9.19
10.40
3 1/2
88.9
0.254
0.368
0.449
6.451
9.351
11.40
9.50
13.30
15.50
101.6
0.330
8.38
14.00
4 1/2
114.3
0.337
0.430
8.56
10.922
16.60
20.00
127.0
0.362
0.500
9.19
12.703
19.50
25.60
External upset only - subject to prior agreement

External & internal upset only - subject to prior agreement
Grade G105 only - subject to prior agreement
4
EU = External Upset, IEU = Internal & External Upset
1
2
3
Note: Drill pipes with weld-on tool joints according to API Spec 7 (38th edition, 1994) are delivered in outside diameters 3 12 and 5 only.
Line Pipe according to API Spec 5L (43th edition, 2004)

Nominal size
Size
NPS
(ASTM)
in
in
in
mm
/2
0.840
21.3
/4
1.050
26.7
1.315
33.4
/2
/4
Outside diameter
1 1/4
1 1/4
1.660
42.2
1 1/2
1 1/2
1.900
48.3
2 3/8
2 /8
7
3 1/2
2 /2
1
3 1/2
2. 375
2.875
3.500
4.000
60.3
73.0
88.9
101.6
Wall thickness
Weight of plain-end tube

Schedule
No.
(equivalent ASTM)
lb/ft
kg/m
in
mm
mm
(ASTM)
0.109
2.80
2.77
40
0.85
0.147
3.70
3.73
80
0.113
2.90
2.87
0.154
3.9
3.91
0.133
3.4
0.179
0.140
Max. production length

ft
1.28
34.17
9.5
1.09
1.61
34.17
9.5
40
1.13
1.70
34.17
9.5
80
1.48
2.19
34.17
9.5
3.38
40
1.68
2.52
34.17
9.5
4.5
4.55
80
2.17
3.21
34.17
9.5
3.6
3.56
40
2.27
3.43
34.17
9.5
0.191
4.9
4.85
80
3.00
4.51
34.17
9.5
0.145
3.7
3.68
40
2.72
4.07
34.17
9.5
0.200
5.1
5.08
80
3.63
5.43
34.17
9.5
0.125
3.2
3.18
3.01
4.51
29.53
9.0
0.141
3.6
3.58
3.37
5.03
32.81
10.0
0.154
3.9
3.91
40
3.66
5.42
37.73
12.0
0.172
4.4
4.37
4.05
6.07
37.73
12.0
0.188
4.8
4.78
4.40
6.57
37.73
12.0
0.218
5.5
5.54
80
5.03
7.43
37.73
12.0
0.250
6.4
6.35
5.68
8.51
37.73
12.0
0.281
7.1
7.14
6.29
9.31
37.73
12.0
0.125
3.2
3.18
3.67
5.51
37.73
12.0
0.141
3.6
3.58
4.12
6.16
37.73
12.0
0.156
4.0
3.96
4.53
6.81
37.73
12.0
0.172
4.4
4.37
4.97
7.44
37.73
12.0
0.188
4.8
4.78
5.40
8.07
37.73
12.0
0.203
5.2
5.16
40
5.80
8.69
39.37
12.0
0.216
5.5
5.49
6.14
9.16
39.37
12.0
0.250
6.4
6.35
7.02
10.51
39.37
12.0
0.276
7.0
7.01
80
7.67
11.39
39.37
12.0
0.125
3.2
3.18
4.51
6.76
39.37
12.0
0.141
3.6
3.58
5.06
7.57
39.37
12.0
0.156
4.0
3.96
5.58
8.37
39.37
12.0
0.172
4.4
4.37
6.12
9.17
39.37
12.0
0.188
4.8
4.78
6.66
9.95
39.37
12.0
0.216
5.5
5.49
40
7.58
11.31
41.01
12.5
0.250
6.4
6.35
8.69
13.02
41.01
12.5
0.281
7.1
7.14
9.67
14.32
41.01
12.5
0.300
7.6
7.62
80
10.26
15.24
41.01
12.5
0.141
3.6
3.58
5.82
8.70
37.73
11.5
0.156
4.0
3.96
6.41
9.63
39.37
12.0
0.172
4.4
4.37
7.04
10.55
39.37
12.0
0.188
4.8
4.78
7.66
11.46
39.37
12.0
0.226
5.7
5.74
40
9.12
13.48
39.37
12.0
0.250
6.4
6.35
10.02
15.02
39.37
12.0
0.281
7.1
7.14
11.17
16.55
39.37
12.0
0.318
8.1
8.08
80
12.52
18.68
39.37
12.0
Line Pipe according to API Spec 5L (43th edition, 2004)

Dimensional range, weight, grade (continuation)
Nominal size
Size
NPS
(ASTM)
in
in
4 1/2
5 9/16
6 5/8
8 5/8
10 3/4
10
Outside diameter
in
4.500
5.563
6.63
8.63
10.75
mm
114.3
141.3
168.32
219.13
2734
---------------------------------------------------------------------------------------------------1
Grade X60 with wall thickness 4.8 mm - 14.3 mm only
2
3
Wall thickness
Weight of plain-end tube

Schedule
No.
(equivalent ASTM)
lb/ft
kg/m
in
mm
mm
(ASTM)
0.141
3.6
3.58
6.57
0.156
4.0
3.96
7.24
0.172
4.4
4.37
7.96
0.188
4.8
4.78
0.203
5.2
5.16
0.219
5.6
0.237
0.250
Max. production length

ft
9.83
37.73
11.5
10.88
37.73
11.5
11.92
37.73
11.5
8.67
12.96
37.73
11.5
9.32
13.99
37.73
11.5
5.56
10.02
15.01
39.37
12.0
6.0
6.02
40
10.80
16.02
41.01
12.5
6.4
6.35
11.36
17.03
41.01
12.5
0.281
7.1
7.14
12.67
18.77
41.01
12.5
0.312
7.9
7.92
13.97
20.73
41.01
12.5
0.337
8.6
8.56
80
15.00
22.42
41.01
12.5
0.438
11.1
11.13
120
19.02
28.25
41.01
12.5
0.156
4.0
3.96
9.02
13.54
36.08
11.0
0.188
4.8
4.78
10.80
16.16
39.37
12.0
0.219
5.6
5.56
12.51
18.74
39.37
12.0
0.258
6.6
6.55
40
14.63
21.92
39.37
12.0
0.281
7.1
7.14
15.87
23.50
39.37
12.0
0.312
7.9
7.92
17.51
25.99
37.73
12.0
0.344
8.7
8.74
19.19
28.45
37.73
12.0
0.375
9.5
9.52
80
20.80
30.88
36.08
12.0
0.500
12.7
12.70
120
27.06
40.28
36.09
11.0
0.188
4.8
4.78
12.94
19.35
39.37
12.0
0.203
5.2
5.16
13.94
20.91
39.37
12.0
0.219
5.6
5.56
15.00
22.47
39.37
12.0
0.250
6.4
6.35
17.04
25.55
39.37
12.0
0.280
7.1
7.11
40
18.99
28.22
39.37
12.0
0.312
7.9
7.92
21.06
31.25
39.37
12.0
0.344
8.7
8.74
23.10
34.24
39.37
12.0
0.375
9.5
9.53
25.05
37.20
39.37
12.0
0.432
11.0
10.97
80
28.60
42.67
39.37
12.0
0.500
12.7
12.70
32.74
48.73
39.37
12.0
0.562
14.3
14.27
120
36.43
54.31
32.80
10.0
0.625
15.9
40.09
59.76
29.53
9.0
0.719
18.3
18.26
160
45.39
67.69
26.25
8.0
0.250
6.4
6.35
20
22.38
33.57
39.37
12.0
0.277
7.0
7.04
30
24.72
36.61
39.37
12.0
0.312
7.9
7.92
27.73
41.14
39.37
12.0
0.322
8.2
8.18
40
28.58
42.65
39.37
12.0
0.344
8.7
8.74
30.45
45.14
39.37
12.0
0.375
9.5
9.53
33.07
49.10
39.37
12.0
0.438
11.1
11.13
38.33
56.94
39.37
12.0
0.500
12.7
12.70
80
43.43
64.64
39.37
12.0
0.562
14.3
14.27
48.44
72.22
37.73
11.5
0.625
15.9
53.45
79.67
34.45
10.5
0.719
18.3
18.26
120
60.77
90.62
31.17
9.0
0.2501
6.41
6.351
20
28.06
42.09
39.37
12.0
0.279
7.1
7.09
31.23
46.57
39.37
12.0
0.307
7.8
7.80
30
34.27
51.03
39.37
12.0
0.344
8.7
8.74
38.27
56.72
39.37
12.0
0.365
9.3
9.27
40
40.52
60.50
39.37
12.0
0.438
11.1
11.13
48.28
71.72
39.37
12.0
0.500
12.7
12.70
60
54.79
81.55
36.09
10.5
0.562
14.3
61.21
91.26
31.17
9.0
0.625
15.9
67.65
100.85
26.25
8.0
0.719
18.3
18.26
100
77.10
114.99
23.95
7.0
End workmanship, threads, couplings

Casing:
Delivered with threaded ends and galvanized or phosphated couplings.
The threads are: short round, long round, buttress, and gastight connection HSC, see the relevant table in the Type of thread column.
H grade pipes are delivered only with a short round thread. Tubes according to API Spec 5CT, the latest edition, are delivered with long round or buttress
thread. Deliveries of casing with gastight connection are subject to prior agreement.
Tubing:
Delivered with round threads and galvanized or phosphated couplings or with Teflon rings.
Pipe threads and couplings are protected against damage during transport and handling.
In-bulk couplings 1.9 10 34 according to API Spec 5CT, latest edition.
In-bulk couplings 2 3/8 10 34 according to HSC in all offered grades.
Pup Joints:
Delivered according to API Spec 5CT, latest edition, the quantity is subject to prior agreement.
Reducing pieces of diameters 1.9 10 34 and the type of thread are subject to prior agreement.
Pipe ends machined outside & inside in compliance with the customers documentation - up to O.D. 5 12 and up to 250 mm from end of tube; for tubes over
5 12 to O.D. 10 34 up to 400 mm from end of tube.
Drill pipe:
Delivered with upset ends and weld-on tool joints. The dimensions and type of weld-on tool joints are subject to prior agreement with the producer and the
specification shall be included in the purchase order.
Any other type of end workmanship is subject to prior agreement with the producer.
Line Pipe:
Delivered with plain ends. External and internal end edges are de-burred. Pipes of outside diameter up to 1.9 ( 48.3 mm) are delivered with ends cut
off perpendicularly to the pipe axis. Pipes of outside diameter 2 3/8 ( 60.3 mm) and above are delivered with either perpendicularly cut off ends or ends
bevelled at an angle of 30o +5o -0o (API Spec 5L + ASTM A 106 bevel) or bevelled in conformity to other standards (ASME B16.25) .
Lengths
Casing:
Range 2
25 34 ft
7.62 10.36 m
Range 3
34 ft and above
10.36 m and above
Range 1
20 24 (28) ft
6.10 7.32 (8.53) m
Range 2
28 32 ft
8.53 9.75 m
Range 3
38 42 ft
11.58 12.80 m
Range 12
18 22 ft
5.49 6.70 m
Range 2
27 30 ft
8.23 9.14 m
Tubing:
Drill pipe:
Line pipe3 :
< 60.3 mm:
A) nominal length 6 m (20 ft)
B) other lengths subject to agreement
5.0 6.86 m, with average length - delivery min. 5.23 m
60.3 mm:
A) nominal length 6 m (20 ft)
B) nominal length 12 m (40 ft)
6.0 12.5 m, with average length - delivery min. 10.67 m
C) other lengths subject to agreement
Surface protection
Unless stated otherwise in the purchase order, pipes are delivered with external short-term anticorrosive surface protection. Subject to agreement, the pipes
can also be provided with the PE coating acc. to DIN 30670:1991 ( 60.3 mm in lengths > 8 m, 168.3 mm in lengths > 6 m).
Bundling
Subject to agreement, the pipes can also be delivered in hexagonal bundles.
---------------------------------------------------------------------------------------------------Subject to agreement with 15/T
3
The whole size range of the Line Pipe can be delivered in exact lengths - tolerance min. +100/-0 mm (50 mm).
1
2
Spiral weld pipes

EN 10220:2002
ISO 4200:1989
CSN 42 5738:1979
DIN 2458:1981
EN 10219-2:1997
API Spec 5L:2004
GOST 8696:1974
PN 79/H-74244:1979
Seamless and welded steel tubes - General tables of dimensions and masses per unit length
Plain-end steel tubes, welded and seamless
Spiral weld steel pipes
Welded steel tubes
Cold formed welded structural hollow sections of non-alloy and fine grain steels
Specification for Line Pipe
Electrically welded steel pipes with spiral seam
Welded steel pipes for transportation of media
Technical delivery regulations

CSN 42 0144:1979
DIN 1615:1984
DIN 1626:1984
CSN EN 10208-1:2000
CSN EN 10208-2:1999
DIN 17120:1984
DIN 17172:1978
DIN 1628:1984
CSN EN 10217-1:2003/A1:2005
CSN EN 10217-5:2005/A1:2005
EN 10219-1:1997
API Spec 5L:2004
GOST 8696:1974
PN 79/H-74244:1979
Spiral weld steel

Welded circular tubes of non-alloy steels without special quality requirements
Welded circular tubes of non-alloy steels with special quality requirements
Steel tubes for pipeline for combustible liquids - part 1: Requirements according to class A
Steel tubes for pipeline for combustible liquids - part 2: Requirements according to class B
Welded circular tubes of non-alloy steels for steel constructions
Steel tubes for pipeline for transport of combustible liquids and gases
Welded circular tubes of non-alloy steels with very high quality requirements
Welded steel pipes for pressure purposes
Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
Cold formed welded structural hollow sections of non-alloy and fine grain steels
Specification for Line Pipe
Electrically welded steel pipes with spiral seam
Welded steel pipes for transportation of media
Dimensional range, weight according to EN 10220:2002, (ISO 4200:1989), EN 10208:1996

Wall thickness (mm)
Outside diameter
mm
5.4
5.6
6.3
7.1
8.8
10
11 1
12.51, 2
323.9
39.3
42.4
44.0
49.3
55.5
62.3
355.6
43.2
46.6
48.3
54.3
61.0
68.4
406.4
49.5
53.4
55.4
62.2
69.9
78.6
86.3
97.8
107
121
457
55.7
60.1
62.3
70.0
78.8
88.6
97.3
110
121
137
508
62.0
66.9
69.4
77.9
87.7
98.6
108
123
135
153
73.7
76.4
85.9
94.6
109
119
135
149
169
93.8
106
119
130
148
162
184
(660)
114
129
141
160
176
200
711
123
139
152
173
190
215
149
163
185
204
231
175
198
218
247
(559)
610
762
813
Ordering is subject to prior agreement
2
The size is not normalized
1
Dimensional range, weight according to CSN 42 5738:1979 and PN 79/H-4244:1979

Wall thickness (mm)
Outside diameter
mm
10
11
12
Weight (kg/m)
324
40.1
48.0
55.0
63.5
377
46.8
56.0
65.1
74.2
426
52.9
63.3
73.7
84.0
94.3
104.5
114.7
124.8
530
65.9
79.0
92.1
105.0
117.8
130.7
143.5
156.2
94.1
109.6
125.1
140.5
155.8
171.1
186.4
125.4
143.1
160.8
178.4
196.0
213.5
183.4
203.5
223.7
243.7
630
720
820
1
Spiral weld pipes
Weight (kg/m)
Dimensional range, weight according to DIN 2458:1981

Wall thickness (mm)
Outside diameter
mm
5.6
6.3
7.1
8.8
10
11
12.5
Weight (kg/m)
323.9
44.0
49.3
55.5
62.3
355.6
48.3
54.3
61.0
68.4
406.4
55.4
62.2
69.9
78.6
86.3
97.8
107
121
457
62.3
70.0
78.8
88.6
97.3
110
121
137
508
69.4
77.9
87.7
98.6
108
123
135
153
(559)
76.4
85.9
94.6
109
119
135
149
169
93.8
106
119
130
148
162
184
(660)
114
129
141
160
176
200
711
123
139
152
173
190
215
149
163
185
204
231
175
198
218
247
610
762
813
Note: Subject to agreement, unnormalized diameters 368, 419.1, 462 and 521 mm are also produced.
1
Dimensional range, weight according to API Spec 5L (43rd edition 2004)

Outside diameter
Wall thickness (in/mm)

0.219/5.6
0.250/6.4
0.281/7.1
0.312/7.9
0.344/8.7
0.375/9.5
0.406/10.3
0.438/11.1 1
0.469/11.9 1
in
mm
Weight (lb.ft1 / kg.m1)
12 34
323.9
29.31/43.96
33.38/50.11
37.42/55.47
41.45/61.56
14
355.6
32.23/48.33
36.71/55.11
41.17/61.02
45.61/67.74
16
406.4
36.91/55.35
42.05/63.13
47.17/69.91
52.27/77.63
50.17/85.32
54.57/92.96
67.62/100.63
72.80/108.20
18
457
41.59/62.34
47.39/71.12
53.18/78.77
58.94/87.49
64.87/96.18
70.59/104.84
76.29/113.53
82.15/122.05
20
508
46.27/69.38
52.73/79.16
59.18/87.70
65.60/97.43
72.21/107.12
78.60/116.78
84.96/123.41
91.51/136.01
22
559
58.07/87.21
65.18/96.63
72.27/107.36
79.56/118.06
86.61/128.73
93.63/139.37
100.86/149.97 107.85/160.55
24
610
63.41/95.26
71.18/105.56
78.93/117.30
86.91/129.00
94.62/140.68
102.31/152.32 110.22/163.93 117.86/175.40
26
660
77.18/114.31
85.60/127.04
94.26/139.73
102.63/152.39 110.98/165.02 119.57/177.62 127.88/190.19
28
711
83.19/123.24
92.26/136.97
101.61/150.67 110.64/164.34 119.65/177.98 128.93/191.58 137.90/205.15
30
7621
98.93/147.37
108.95/162.31 118.65/176.76 128.32/191.17 138.29/206.01 147.92/220.36
32
8131
97.83/145.58
116.30/173.26 126.66/188.69 136.99/204.09 147.64/219.95 157.94/235.29
Dimensional range, weight according to GOST 8696:1974

Wall thickness (mm)
Outside diameter
mm
6.0
7.0
8.0
9.0
10.0
11.0 1
12.0 1
Weight (kg/m)
325
47.91
377
55.71
426
63.08
73.41
83.70
480
71.18
82.87
94.51
530
78.69
91.63
104.5
117.4
630
109.1
124.5
139.9
155.2
720
124.9
142.6
160.2
177.7
195.2
212.6
182.7
202.7
222.7
242.7
820
1
Steel grades
CSN 42 5738:1979
DIN 1615:1984 (1626, 1628)
CSN EN 10208-1:2000
CSN EN 10208-2:1999
CSN EN 10217-1:2003/A1:2005
CSN EN 10217-5:2005/A1:2005
EN 10219-1:1997
CSN EN 10025:1990 + appendix A1:1993
DIN 17120:1984
DIN 17172:1972
API Spec 5L:2000
GOST 8696:1974
PN 79/H-74244:1979
11 375, 11 378, 11 425, 11 523

St 33 (St 37.0, St 37.4, St 44.0, St 44.4, St 52.0, St 52.4)
L210GA, L235GA, L245GA, L290GA, L360GA
L245NB, L245MB, L290NB, L360NB, L290MB, L360MB, L415MB, L450MB, L485MB
P195TR1, P235TR1, P265TR1, P195TR2, P235TR2, P265TR2
P235GH TC1, P265GH TC1
S235JRH, S275JOH, S275J2H, S355JOH, S355J2H
S235JR, S235JRG2, S235JRG3, S275JR, S275J2G3, S355J2G3
RSt 37-2, RSt 37-3, RSt 44-2, RSt 44-3, St 52-3
StE 290.7, StE 360.7, StE 290.7 TM, StE 320.7 TM,
StE 360.7 TM, StE 385.7 TM, StE 415.7 TM, StE 445.7TM, StE 480.7TM
A-PSL1, B-PSL1, B-PSL2, X42-PSL1, X42-PSL2, X46-PSL1, X46-PSL2, X52-PSL1, X52-PSL2,
X56-PSL1, X56-PSL2, X60-PSL1, X60-PSL2, X65-PSL1, X65-PSL2, X70-PSL1, X70-PSL2
VSt 3 sp
G235, G295, G355
Limitation of wall thickness depending on tube outside diameter, grade and test pressure:
Maximum thickness for individual grades
Diameter
Minimum thickness for

all grades
St 37.0 L235GA
St 44.0 L245NB
St 52.0 L360MB
L415MB
L450MB
L485MB
323.9
5.6
8.00
8.00
8.00
7.10
7.10
7.10
355.6
5.6
8.00
8.00
8.00
8.00
8.00
8.00
377.0
5.6
8.00
8.00
8.00
8.00
8.00
8.00
406.4
5.6
12.50
11.00
11.00
10.00
10.00
8.80
426.0
5.6
12.50
12.50
11.00
10.00
10.00
10.00
457.0
5.6
12.50
12.50
11.00
11.00
11.00
10.00
508.0
5.6
12.50
12.50
12.50
12.50
11.00
11.00
530.0
5.6
12.50
12.50
12.50
12.50
12.50
11.00
559.0
5.6
12.50
12.50
12.50
12.50
12.50
12.50
610.0
5.6
12.50
12.50
12.50
12.50
12.50
12.50
630.0
6.3
12.50
12.50
12.50
12.50
12.50
11.0/12.51
660.0
6.3
12.50
12.50
12.50
11.0/12.51
11.0/12.51
10.0/12.51
711.0
6.3
12.50
12.50
12.50
11.0/12.51
10.0/12.51
8.8/12.51
720.0
7.1
12.50
12.50
12.50
11.0/12.5
10.0/12.5
10.0/12.51
762.0
8.0
12.50
12.50
12.50
11.0/12.5
10.0/12.5
8.8/12.51
813.0
8.0
12.50
12.50
11.0/12.54
10.0/12.5
8.8/12.5
8.8/12.51
820.0
8.0
12.50
12.50
11.0/12.5
10.0/12.5
8.8/12.5
8.0/12.51
Diameter
Minimum thickness for

all grades
X52
X60
X65
X70
323.9
5.6
7.90
7.90
7.10
7.10
7.10
355.6
5.6
7.90
7.90
7.90
7.90
7.90
406.4
5.6
11.90
11.10
10.30
9.50
9.50
457.0
5.6
12.70
11.90
11.10
11.10
10.30
508.0
5.6
12.70
12.70
11.90
11.90
11.10
559.0
5.6
12.70
12.70
12.70
12.70
11.90
610.0
5.6
12.70
12.70
12.70
12.70
12.70
660.0
6.3
12.70
12.70
12.70
12.70
11.9/12.71
711.0
6.3
12.70
12.70
12.70
762.0
8.0
12.70
813.0
8.0
12.70
1
1
1
1
Maximum thickness for individual grades
11.9/12.71
11.1/12.71
12.70
11.9/12.7
10.9/12.7
9.5/12.71
11.9/12.71
11.1/12.71
9.5/12.71
9.5/12.71
Lengths
The pipes are delivered in lengths 8 12.3 m for wagon transport, in lengths 8 13.5 m for truck transport, in fixed lengths
(e.g. 12 m 500 mm or in exact lengths with tolerance of +50/-0 mm (+25/-0 mm subject to agreement).
With special requirements the min. pipe length is 6 m and max. length 18 m. Pipes of 8 m length where water pressure testing is required are manufactured
in double lengths and flame-cut after the testing, i.e. one end is bevelled and the other is perpendicular.
End workmanship
a) perpendicularly flame-cut ends with lengths tolerance of +50/-0 mm
b) perpendicularly cut-off end
c) bevelled ends for welding in conformity to the relevant standards (e.g. DIN 2559/22)
-----------------------------------------------------1
The first number in the fraction = max. wall thickness with test pressure in accordance with the requirements by API or EN / The other number in the fraction = max. wall thickness with the maximum possible test
pressure allowed by the test press if the limitation is agreed by the customer.
Socket pipes
The pipes are delivered according to DIN 2460 and provided with outside polyethylene coating according to DIN 30 670-N-n and internal protection
(cement mortar) according to DIN 2614. For the joints outside surface insulation by means of e.g. a heat-shrinkable collar is sufficient, no additional internal
surface treatment is required.
Steel tube
Cement Mortar
Steel grades
Max. thickness
St 37.0
8,0
St 44.0
6,3
The pipes are manufactured and tested in conformity to DIN 2458/DIN 1626.
Nominal
bore
Outside diameter
Wall thickness1
Weight
per meter
Depth of
overlapping
t
Clearance of
connection
f
Nominal pipeline pressure

PN (by the steel used)
DN
(mm)
(mm)
(kg/m)
(mm)
(mm)
St 37.0
St 52.0
300
323.9
5.6
44.0
105
32
50
350
355.6
5.6
48.3
115
2.5
32
40
400
406.4
5.6
55.4
120
2.5
32
40
500
508
5.6
69.4
130
25
40
600
610
6.3
93.8
130
25
32
700
711
6.3
109
130
20
32
800
813
7.1
141
130
20
32
Surface protection
The pipes are delivered with a natural black surface or with the following types of the anticorrosive protection:
All combinations of the outside and inside finish including surface free of protection can be delivered
Diameter (mm)
Outside insulation
Colour modification
of outside coating
Extruded polyethylene coating with standard

and reinforced thickness
(DIN 30670:1991 - N-n, N-v, S-n, S-v)2
Concrete-plastic coating
according to KN 42 0025:2003, FZM-N
standard, FZM-S special (for the protection of
pipes with PE coating)
Inside insulation
Length
Producer of insulation
black
yellow3
blue3
6 18 m
natural
yellow3
blue3
6 14 m
Cement mortar
thickness 5 - 13 mm
(DIN 2614:1990 - II-N)1
323.9 820
Protective bitumen varnish painting, bitumen
coating reinforced by 1 or 2 layers of fiberglass
matt and PVC band according to
KN 42 0023:1994 or
CSN 42 0022:1977
Bitumen protective varnish ALIT

or others
1
2
3
This type of insulation should be delivered off the winter period (i.e. approx. from 1st of April to 31st of November).
Wall thickness > 12 mm by the particular O.D. is subject to agreement.
Subject to agreement
-------------------------------------------1
For max. wall thickness see the Limitation of wall thickness depending on tube outside diameter etc. on the previous page.
6 13 m
6 18 m
6 18 m
Tubular products
Traction line poles
are produced from two seamless tubes of different diameters and lengths connected by welding in conformity to technical delivery conditions:
Traction line poles TP NH 129/96 or to more demanding conditions TP NH 173/99TP1.
T Poles are produced from materials see the chart below.
Dimensions and weights

T Poles diameter 168 mm
see TP NH 173/99 Annex A

see TP NH 173/99 Annex B
see TP NH 173/99 Annex C
Steel grades according to standards

Strength group
DIN
EN
NFA
GOST
API + ASTM
Group 1
Re 245 MPa
11 353.0 (.1)
11 369.1
12 021.1
St 37.0
RSt 37-2, St 37-3, St 34.4
St 35.8
S235JRH
L245NB
TUE 220 A
TUE 235 A, B
TUE 250 B
St 4
20
B
Gr. 6
Group 2
Re 275 MPa
11 453.0 (.1)
12 022.1
St 44.0, St 44.4
St 44-2, St 44-3
St 45.8
S275J0H
S275J2H
TUE 275 B
St 5
09G2S
H 40
X 42
X 46
Group 3
Re 355 MPa
11 523.0 (.1)
St 52.0, St 52.4
St 52-3
S355J0H
S355J2H
X 52
Tubular products
CSN
-------------------------------------------------1
The assortment may be ordered only by prior agreement.
61201
60742
58163
56531
55982
53233
50181
49662
47363
47271
46882
44233
42301
41902
40903
40551
40102
38633
38381
37952
36463
35981
36152
35043
34501
34022
33283
33841
33302
32443
32751
31792
31423
32441
31382
30963
32611
30702
30313
2381
2592
3183
2591
2822
3463
3101
3412
4133
3371
3712
4483
4081
4392
4843
4431
4772
5723
4831
5182
6183
5641
6072
6653
6141
6652
7783
6651
7202
8423
7221
7652
9073
7821
9122
9833
8411
9862
10163
T 168/8
T 168/8.5
T 168/9
T 168/9.5
T 168/10
T 168/10.5
T 168/11
T 168/11.5
T 168/12
T 168/12.5
T 168/13
T 168/13.5
T 168/14
3081
2582
2423
2901
2502
2343
2781
2412
2263
2691
2492
2173
2571
2392
2083
2481
2382
2143
2621
2442
2033
2521
2352
1953
2381
2222
2003
2641
2412
1913
2481
2272
1803
2681
2482
1923
2501
2322
1803
Min. weight [kg]
6 000
5 500
5 500
5 000
5 000
4 500
4 500
4 000
4 000
3 500
3 500
3 000
3 000
Length of upper
part [mm]
Tension of top is calculated for minimum sizes of tubes and value of flexural moment at stuck according to S DOP Praha
Strength group Re 245 MPa
4
Strength group Re 355 Mpa
Tension at top (peak)

[N]
Max. deflection
[mm]
Type of pole
min. 51
min. 4.52
min. 4.53
min. 4.51
min. 4.52
min. 4.53
min. 4.51
min. 4.52
min. 4.53
min. 4.51
min. 4.52
min. 4.53
min. 4.51
min. 4.52
min. 4.53
min. 4.51
min. 52
min. 4.53
min. 51
min. 52
min. 4.53
min. 51
min. 52
min. 4.53
min. 51
min. 52
min. 4.53
min. 61
min. 62
min. 4.53
min. 61
min. 62
min. 4.53
min. 71
min. 72
min. 53
min. 71
min. 72
min. 53
W.t. of upper part

[mm]
152
152
152
152
152
152
152
152
152
152
152
152
152
Diameter of tube,
upper part [mm]
8 000
8 000
7 500
7 500
7 000
7 000
6 500
6 500
6 000
6 000
5 500
5 500
5 000
Length of lower
part [mm]
min. 6.31
min. 52
min. 4.53
min. 6.31
min. 52
min. 4.53
min. 6.31
min. 5.62
min. 4.53
min. 6.31
min. 5.62
min. 4.53
min. 6.31
min. 5.62
min. 4.53
min. 6.31
min. 5.62
min. 53
min. 71
min. 6.32
min. 53
min. 71
min. 6.32
min. 53
min. 71
min. 6.32
min. 5.63
min. 81
min. 72
min. 5.63
min. 81
min. 72
min. 5.63
min. 91
min. 82
min. 6.33
min. 91
min. 82
min. 6.33
W.t. of lower part

[mm]
168
168
168
168
168
168
168
168
168
168
168
168
168
Diameter of tube,
lower part [mm]
14 000
13 500
13 000
12 500
12 000
11 500
11 000
10 500
10 000
9 500
9 000
8 500
8 000
Total length L [mm]
Technical specifications of T - pole, diameter 168 mm
120701
119142
116933
111291
109602
106453
96981
95182
93003
90431
88502
86893
80761
80002
76103
76141
74372
72023
71531
69702
66463
66931
66002
62653
61761
61122
58193
60161
59462
56493
57171
56492
53283
56221
55462
52213
54091
53372
49873
1891
2052
2443
2051
2222
2683
2391
2622
3173
2781
3072
3423
3041
3292
4083
3541
3932
4373
3871
4302
4883
4141
4532
5113
4841
5192
5493
5201
5582
5863
5581
5962
6313
5981
6402
6733
6431
6832
7263
T 219/8
T 219/8.5
T 219/9
T 219/9.5
T 219/10
T 219/10.5
T 219/11
T 219/11.5
T 219/12
T 219/12.5
T 219/13
T 219/13.5
T 219/14
4421
4142
3713
4301
4012
3633
4111
3852
3473
3991
3732
3383
3811
3552
3213
4031
3672
3123
3941
3502
2953
3801
3382
2943
3901
3602
2783
3901
3462
3073
3921
3532
2883
4151
3772
3033
3871
3512
2903
Min. weight [kg]
6 000
5 500
5 500
5 000
5 000
4 500
4 500
4 000
4 000
3 500
3 500
3 000
3 000
Length of upper
part [mm]
3
4

[N]
Max. deflection [mm]
Type of pole
min. 6.31
min. 6.32
min. 4.53
min. 6.31
min. 6.32
min. 4.53
min. 6.31
min. 6.32
min. 4.53
min. 6.31
min. 6.32
min. 4.53
min. 6.31
min. 6.32
min. 4.53
min. 6.31
min. 6.32
min. 4.53
min. 71
min. 6.32
min. 4.53
min. 71
min. 6.32
min. 53
min. 71
min. 72
min. 53
min. 81
min. 72
min. 6.33
min. 81
min. 72
min. 6.33
min. 91
min. 82
min. 6.33v
min. 91
min. 82
min. 73
W.t. of upper part

[mm]
168
168
168
168
168
168
168
168
168
168
168
168
168
Diameter of tube,
upper part [mm]
8 000
8 000
7 500
7 500
7 000
7 000
6 500
6 500
6 000
6 000
5 500
5 500
5 000
Length of lower
part [mm]
min. 71
min. 6.32
min. 6.33
min. 71
min. 6.32
min. 6.33
min. 71
min. 6.32
min. 6.33
min. 71
min. 6.32
min. 6.33
min. 71
min. 6.32
min. 6.33
min. 81
min. 72
min. 6.33
min. 81
min. 72
min. 6.33
min. 81
min. 72
min. 6.33
min. 91
min. 82
min. 6.33
min. 91
min. 82
min. 73
min. 101
min. 92
min. 73
min. 111
min. 102
min. 83
min. 111
min. 102
min. 83
W.t. of lower part

[mm]
219
219
219
219
219
219
219
219
219
219
219
219
219
Diameter of tube,
lower part [mm]
14 000
13 500
13 000
12 500
12 000
11 500
11 000
10 500
10 000
9 500
9 000
8 500
8 000
Total length L [mm]
182751
180482
176203
164971
161172
158223
148121
141762
141023
134831
130932
128073
122821
117392
116553
115551
109932
107993
106031
100952
100023
100241
95902
94863
92641
90162
88453
89381
86762
84833
82651
81572
80813
80351
79152
78313
77391
76232
75423
1571
1722
2083
1841
2312
2423
1981
2412
2603
2351
2582
3083
2701
3032
3303
2891
3222
3903
3131
3762
4153
3601
4012
4433
3901
4282
5103
4161
4572
5453
4881
5362
5793
5201
5712
6173
5561
6092
6563
T 245/8
T 245/8.5
T 245/9
T 245/9.5
T 245/10
T 245/10.5
T 245/11
T 245/11.5
T 245/12
T 245/12.5
T 245/13
T 245/13.5
T 245/14
5701
5242
4933
5531
5082
4763
5301
4872
4583
5731
5142
4423
5471
4912
4233
5511
4742
4353
5611
4512
4143
5601
4712
3983
5311
4442
4113
5421
4732
3953
5721
4452
4143
5461
4712
3963
5511
4962
3983
Min. weight [kg]
6 000
5 500
5 500
5 000
5 000
4 500
4 500
4 000
4 000
3 500
3 500
3 000
3 000
Length of upper
part [mm]
4

[N]
Max. deflection
[mm]
Type of pole
min. 6.31
min. 6.32
min. 6.33
min. 6.31
min. 6.32
min. 6.33
min. 6.31
min. 6.32
min. 6.33
min. 71
min. 6.32
min. 6.33
min. 71
min. 6.32
min. 6.33
min. 81
min. 6.32
min. 6.33
min. 81
min. 6.32
min. 6.33
min. 91
min. 6.32
min. 6.33
min. 91
min. 6.32
min. 6.33
min. 91
min. 72
min. 6.33
min. 101
min. 72
min. 73
min. 101
min. 82
min. 73
min. 101
min. 92
min. 73
W.t. of upper part

[mm]
219
219
219
219
219
219
219
219
219
219
219
219
219
Diameter of tube,
upper part [mm]
8 000
8 000
7 500
7 500
7 000
7 000
6 500
6 500
6 000
6 000
5 500
5 500
5 000
Length of lower
part [mm]
min. 81
min. 72
min. 6.33
min. 81
min. 72
min. 6.33
min. 81
min. 72
min. 6.33
min. 91
min. 82
min. 6.33
min. 91
min. 82
min. 6.33
min. 91
min. 82
min. 73
min. 101
min. 82
min. 73
min. 101
min. 92
min. 73
min. 101
min. 92
min. 83
min. 111
min. 102
min. 83
min. 12.51
min. 102
min. 93
min. 12.51
min. 112
min. 93
min. 141
min. 12.52
min. 103
W.t. of lower part

[mm]
245
245
245
245
245
245
245
245
245
245
245
245
245
Diameter of tube,
lower part [mm]
14 000
13 500
13 000
12 500
12 000
11 500
11 000
10 500
10 000
9 500
9 000
8 500
8 000
Total length L [mm]
Bent tubular products

Dimensions and material
Pipe bending is conducted in compliance with the customers requirements in the following materials and size range:
Pipe diameter:
Wall thickness:
Material:
---------------------------------------------------------------1
Only for bent radius 9 000 mm and larger.
22 mm 127 ( 133)1 mm
3.5 mm 8 mm
in accordance with DIN from St 35 to St 52

Vratimovsk 689
707 02 Ostrava-Kunice
Czech Republic
T +420 595 684 382, +420 595 686 945, +420 595 684 878, +420 595 684 963,
+420 595 684 313, +420 595 686 872, +420 595 685 712
F +420 595 687 810
E marketing.ostrava@mittalsteel.com
www.mittalsteelostrava.com

Marketing
September 2006

Tubes and Pipes

Uploaded by

Document Informationclick to expand document informationMittal Steel Ostrava a.s. Is a prominent producer of seamless pipes in the Czech Republic. Tubes and pipes are manufactured in compliance to ISO, EN, API, DIN, ASTM, NF, BS, GOST, CSN and other standards.

Document Informationclick to expand document information

Copyright:

Available Formats

Tubes and Pipes

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Tubes and Pipes

Uploaded by

Copyright:

Available Formats

production programme

Tubes and pipes

Mittal Steel Ostrava a.s.

Mittal Steel Ostrava a.s.

Mittal Steel Ostrava a.s.

The Tube Plant of Mittal Steel Ostrava a.s.

Tubes and pipes are manufactured in

Plain-end seamless tubes and pipes

Technical delivery regulations for tubes and pipes of carbon steel

Hot rolled seamless tubes of class 10 to 16 steels

For tubes and pipes of high-grade carbon steel - for boilers

Seamless steel tubes with guaranteed properties at elevated temperatures

See the relevant chart

Pipe finish and end workmanship

Extruded polyethylene coating with standard and

Extruded polyethylene coating with standard and

Mittal Steel Ostrava a.s.

Mittal Steel Ostrava a.s.

Bitumen or other varnish overcoat3

Mittal Steel Ostrava a.s.

Mittal Steel Ostrava a.s.

Dimensional range, weight and maximum length according to

Weight (kg/m)/max. lengths (m)

Ordering of the tubes is subject to prior agreement.

Dimensional range, weight and maximum length according to

Weight (kg/m)/max. lengths (m)

Ordering of the tubes is subject to prior agreement.

Dimensional range, weight and maximum length according to

Weight (kg/m)/max. lengths (m)

Ordering of the tubes is subject to prior agreement.

Dimensional range, weight and maximum length according to

Wall thickness (mm)

Weight (kg/m)/max. lengths (m)

Ordering of the tubes is subject to prior agreement.

Dimensional range, weight and maximum length according to

Weight (kg/m)/max. lengths (m)

Ordering of the tubes is subject to prior agreement.

Dimensional range, weight and maximum length according to

Weight (kg/m)/max. lengths (m)

33.1/11.5 35.86/10.8 37.2/10.5

38.4/11.5 41.61/10.5 43.1/10.5

Ordering of the tubes is subject to prior agreement.

Dimensional range, weight and maximum length according to

Dimensional range, weight and maximum length according to

Dimensional range, weight and maximum length according to

Weight (kg/m)/max. lengths (m)

Ordering of the tubes is subject to prior agreement.

Dimensional range, weight and maximum length according to

Weight (kg/m)/max. lengths (m)

Ordering of the tubes is subject to prior agreement.

Seamless tubes suitable for screwing (threaded tubes)

Steel tubes suitable for screwing - medium series

According to NF A 49-115:1978, EN 10255:2004

The data in brackets are the sizes according to EN 10255.

According to UNI 8863:1987

Pipe finish and end workmanship

Bundling and method of delivery

Seamless tubes suitable