Measuring Pin Catalogue: Measuring Pins Measuring Pin Sets Storage Cases Test Certificates Magnetic Measuring Pins
Measuring Pin Catalogue: Measuring Pins Measuring Pin Sets Storage Cases Test Certificates Magnetic Measuring Pins
Measuring Pin Catalogue: Measuring Pins Measuring Pin Sets Storage Cases Test Certificates Magnetic Measuring Pins
MEASURING PINS
DREI-S measuring pins are high-precision testing instruments with a tolerance of 1m in tolerance class I. Boasting excellent reliability and hard-wearing qualities, they are ideal for use in quality assurance, in stock receipt control and in manufacturing processes. They are simple to use and very suitable for measurement tests on work pieces in manufacture, e.g. for testing bore holes on jig boring machines and/or on jig milling machines.
Adjustment of dial gauges Angularity of bore holes and bore hole tolerances
Our many years of experience, continuous investment in complex manufacturing plants and high-precision, PC-networked quality control plants guarantee the quality of DREI-S measuring pins, which hold a leading position in the European market. DREI-S measuring pins are particularly suitable for the measurement of even the smallest bore holes. In contrast to expensive internal measuring instruments, their length offers a significant advantage: deep bore holes can be measured not only for their dimensional accuracy but also for their linearity and angularity. DREI-S measuring pins can also be used for the measurement of angularity, distances between holes, dovetail guides, profile depths, guide surfaces and groove measurements. In addition, they are suitable as adjustment controllers for a wide variety of measuring instruments such as micrometers, dial gauges, as well as go / nogo gauges. DREI-S measuring pins are manufactured from gauge steel, hardness 60 64 HRC in accordance with DIN 2269, and tested at a temperature of 20 C 1 C. DREI-S measuring pin holders allow the straightforward creation of individual go / nogo gauges, whereby two measuring pins are placed in the holder to serve as the upper and lower limit of a given tolerance range. Here you can see some illustrations of some of the applications already implemented.
Groove measurements
Micrometer divisions
Guide surfaces
Dovetail guides
02
MEASURING PINS
DREI-S measuring pins are ideal for use as calibrating pins, as well to complement or expand incomplete pin sets. Nominal diameter Accuracy in accordance with DIN 2269 Standard dimensions from 0.10 25.00 mm Tolerance class I = Tolerance class II = Grading 0.001 mm 0.002 mm
d= 0.10 - 0.99 mm
Chamfering:
As standards, increasing by 0.01 mm Customised grading available on request Pins with 1/1000 mm grading are only available in tolerance class I ( 0.001 mm) Calibrated steel with hardness of 60-64 HRC, aged (11.5 1) x 10 -6 x K -1 20 C 1 C from 0.10 0.99 mm: 40 mm from 1.00 25.00 mm: 70 mm Deviation For pins between 0.10 - 0.49 mm a 1/1000 mm grading is also possible Standard length l = 30 mm Tolerance class 0 = 0.0005 mm
Material in accordance with DIN 2269 Longitudinal expansion coefficient Reference temperature in accordance with DIN 102 Length including chamfer
d= 1.00 - 10.00 mm
from 0.10 0.99 mm both ends plain from 1.00 10.00 mm one end bevelled from 10.01 25.00 mm both ends bevelled Size and shape of bevelling in accordance with DIN 2269; serves as protection against damage and makes insertion easier
d= 10.01 - 25.00 mm
Labelling
from 0.10 1.49 mm unlabelled from 1.50 2.99 mm labelling on centre of testing surface *) from 3.00 10.00 mm labelling on sharp-edged front surface from 10.01 25.00 mm labelling on a front surface The tolerance class is not specified
1 m
*) CAUTION: Because of possible enlargement in diameter, do not test above the marks! 03
DREI-S measuring pin sets are available in tolerance class I = 0.001 mm or II = 0.002 mm in the diameter range of 0.10 25.00 mm , with a standard grading of 0.01 mm. The measuring pins are supplied in high-quality storage cases.
We supply 30 standard sets of measuring pins from stock. Each set is available in two tolerance classes. The storage cases are available in 3 sizes. The appropriate size is determined by the content, i.e. according to the number of items and their diameter.
Each pin is positioned individually in a high-quality plastic plate by means of bore holes which are sized to fit the pin diameter and labelled appropriately.
Sets 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Storage cases 1 1 1 1 1 1 3 4 1 1 1 2 1 1 1 1 1 5 1 1 1 1 1 1 1 1 1 1 1
Size B B A A B B B B B B B B B B B B B B A B B B B B B B B B C
Contents (pcs.) 20 40 41 50 91 91 100 191 91 81 100 181 76 100 100 100 100 451 51 101 100 100 100 100 100 100 100 100 273
Diameter size in mm 1.00 20.00 0.50 20.00 1.00 5.00 5.10 10.00 1.00 10.00 1.05 10.05 10.10 20.00 1.00 20.00 0.50 5.00 1.00 5.00 5.05 10.00 1.00 10.00 0.50 2.00 2.02 4.00 4.02 6.00 6.02 8.00 8.02 10.00 1.00 10.00 0.50 1.00 1.00 2.00 2.01 3.00 3.01 4.00 4.01 5.00 5.01 6.00 6.01 7.00 7.01 8.00 8.01 9.00 9.01 10.00 1.00 10.00 *in addition, for each nominal diameter, a test pin is included with + 0.01 overdimension and 0.01 underdimension
Grading in mm 1.00 0.50 0.10 0.10 0.10 0.10 0.10 0.10 0.05 0.05 0.05 0.05 0.02 0.02 0.02 0.02 0.02 0.02 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.10*
05
STORAGE CASES
with bore holes for measuring pins
DREI-S storage cases protect the measuring pins and at the same time enable a clear storage system. They are available in 3 sizes with a bore hole depth corresponding to the length of DREI-S measuring pins.
Design: Wooden frame in black enamel. Black plastic retaining panel with bore holes. Labelling on all bore holes to show diameter sizes. Tolerance class is specified on the plate.
06
External dimensions/capacity
Size A
Small storage case L approx. 175 mm, W approx. 155 mm, H approx. 84 mm Capacity 55 measuring pins 50 measuring pins 25 measuring pins
Size B
Standard storage case L approx. 325 mm, W approx. 155 mm, H approx. 84 mm Capacity 100 measuring pins 55 measuring pins 36 measuring pins 21 measuring pins
Size C
Large storage case With special dimensions, L approx. 415 mm, W approx. 325 mm, H approx. 84 mm Capacity according to diameter, up to 300 measuring pins
07
Metal pin holders made of zinc die casting DREI-S measuring pin holders allow the straightforward creation of individual goods/spoilage calibres, whereby two measuring pins are placed in the holder to serve as the upper and lower limit of a given tolerance range. The measuring pin holders are available in 5 sizes. Size of holder Size 1 Size 2 Size 3 Size 4 Size 5 Span range 1 - 2 mm 2 - 4 mm 4 - 6 mm 6 - 8 mm 8 - 10 mm Length of Length holder of span approx. 60 mm approx. 68 mm approx. 76 mm approx. 84 mm approx. 92 mm approx. 26 mm approx. 30 mm approx. 33 mm approx. 35 mm approx. 37 mm
Plastic handles The use of thin measuring pins may result in the pins heating up. Under these circumstances, the rated dimensions can no longer be guaranteed. Measuring pins with a diameter range of 0.40 to 5.30 mm maybe supplied with replaceable plastic handles
Handle length Size 1 Size 2 Size 3 Size 4 Size 5 Size 6 Size 7 Size 8 Size 9 Size 10
Span range 0.40 0.80 mm 0.80 1.30 mm 1.30 1.80 mm 1.80 2.30 mm 2.30 2.80 mm 2.80 3.30 mm 3.30 3.80 mm 3.80 4.30 mm 4.30 4.80 mm 4.80 5.30 mm
Diameter of handle approx. 8 mm approx. 8 mm approx. 8 mm approx. 8 mm approx. 8 mm approx. 8 mm approx. 8 mm approx. 8 mm approx. 8 mm approx. 8 mm
Length of handle approx. 14 mm approx. 14 mm approx. 14 mm approx. 14 mm approx. 14 mm approx. 14 mm approx. 14 mm approx. 14 mm approx. 14 mm approx. 14 mm
08
CERTIFICATES OF ACCURACY
The following certificates of accuracy can be issued for measuring pins
Certificate of accuracy no.1 (free of charge) General confirmation that the diameters of the measuring pins are in accordance with tolerance class I or II of DIN 2269. Surface roughness and roundness 1 m. Certificate of accuracy no. 2* (at extra charge) Each measuring pin is listed and classified in a table showing rated and actual diameter. e.g. rated 2.30 act. 2.2998 Tol. I rated 2.35 act. 2.3502 Tol. I Surface roughness and roundness 1m. Certificate of accuracy no. 3* (at extra charge) Each measuring pin is listed in a table showing both rated and actual diameter, and measured roughness and roundness. e.g. rated 2.30 act. 2.2998 rgh. 0.65 rd. 0.75 rated 2.35 act. 2.350 rgh. 0.50 rd. 0.60 Surface roughness and roundness 1m In all our certificates of accuracy you can find directions to DKD (German Calibration Laboratory) or PTB (Physical-Technical Institute of Germany) for the return of the measuring tools e.g.: Certificate of accuracy Issued on: Certificate no.: Order no.: For: 20.08.03 3020/9/ Year 402008 Smith & Co KG 91126 Schwabach case no.: 037/02/Year
Measuring pin set rated 0.500 5.000 mm II = 0.002 mm Reference temperature according to DIN 102 = 20 C 1 C Test instrument length: KLM 60.01 DKD Calibration no. 0526/01/03 and 0527/01/03 Measuring deviation: ( 0.2 + 2 x L/100) m, L given in mm Reference pins: No. 2989 PTB 99 No.: 0733 DKD-K-00303-04-03 Roundness no.: 87707 DKD 12653-99 Roughness no.: 0427 RNDH 2 n. EN 814 003 PTB 03
Certificate of accuracy no. 4 (price according to scope of test) If required, all measuring pins can be certified by an external, DKD-approved test laboratory.
*) for measuring pins of less than 0.50 mm, only certificate no.1 can be issued. 09
Magnetic measuring pins facilitate the testing procedures. Specially suitable for rational gear wheel measurement. Additional possible implementations include testing procedures on work items where conventional measuring pins either roll away or fall down due to position (e.g. measurement of diagonal surfaces). In the case of steel work items, the pins are self-adhesive, thus facilitating the test procedure. The magnetic strength of the magnetic measuring pins is both significantly higher than in the case of magnetic measuring pins made of steel, and does not deteriorate over time.
Nominal diameter
Accuracy Length
Tolerance I = 0.001 mm 35 mm
11
DREI-S-WERK Przisionswerkzeuge GmbH & Co. Fertigungs KG Office location: Postal address: Schmauser-Str. 3 Phone +49 (0) 98 74/50 42 150 PO Box 20 D-91564 Neuendettelsau Fax +49 (0) 98 74/50 42 151 D-91561 Neuendettelsau
www.drei-s-werk.com precision@drei-s-werk.de