Turbo Machine is defined as a

device that extracts energy from a continuously flowing fluid by the dynamic action of one or more rotating elements . The prefix turbo is a Latin word meaning spin or whirl implying that turbo machines rotate in some way.

Types of Turbines
1. 2. 3.

Steam Turbines Gas Turbines (Combustion Turbines) Water (Hydraulic) Turbines

Srinivas School of Engineering, Mukka

Steam Turbines

A steam turbine is mainly used as an ideal prime mover in which heat energy is transformed into mechanical energy in the form of rotary motion. A steam turbine is used in
1. 2.

3.

Electric power generation in thermal power plants. Steam power plants. To propel the ships, submarines.

In steam turbines, the heat energy of the steam is first converted into kinetic (velocity) energy which in turn is transformed into mechanical energy of rotation and then drives the generator for the power generation.
Srinivas School of Engineering, Mukka 4

Based on action of steam or type of expansion:

1. 2. 3.

Impulse or velocity or De Laval turbine Reaction or pressure or Parsons turbine Combination turbine Single stage turbine 2. Multi-stage turbine

Based on number of stages:

1.

Based on type of steam flow:

1.

Axial flow turbine

2. Radial flow turbine

Srinivas School of Engineering, Mukka

Srinivas School of Engineering, Mukka

Srinivas School of Engineering, Mukka

. The steam is made to fall in its pressure by expanding in a nozzle. Due to this fall in pressure, a certain amount of heat energy is converted into kinetic energy, which sets the steam to flow with a The rapidly moving particles of the steam enter the greater velocity. rotating part of the turbine, where it undergoes a change in the direction of motion, which gives rise to a change of momentum and therefore a force. This constitutes the driving force of the turbine. Srinivas School of Engineering,

Mukka 8

Impulse Turbines (De Laval Turbine)

In this type of turbine, steam is initially expanded in a nozzle from high pressure to low pressure. High velocity jet of steam coming out of the nozzle is made to glide over a curved vane, called Blade.

The jet of steam gliding over the blade gets deflected very closely to surface. This causes the particles of steam to suffer a change in the direction of motion, which gives rise to a change of momentum and therefore a force, which will be centrifugal in nature.
Resultant of all these centrifugal forces acting on the entire curved surface of the blade causes it to move.

Srinivas School of Engineering, Mukka

11

NOZZLE HIGH PRESSURE STEAM

VH PH

EXHAUST STEAM

Velocity Variation Pressure Variation

VL PL
TURBINE SHAFT

P
B

MOVING BLADES

Schematic of Impulse Turbine

Nozzle

Rotor Blades

Pressure-Velocity diagram in Impulse Turbine

Srinivas School of Engineering, Mukka 12

Principle of working In this type of turbine, the high pressure steam does not initially expand in the nozzle as in the case of impulse turbine, but instead directly passes onto the moving blades.

Srinivas School of Engineering, Mukka

13

Blade shapes of reaction turbines are designed in such a way that the steam flowing between the blades will be subjected to the nozzle effect. Hence, the pressure of the steam drops continuously as it flows over the blades causing, simultaneous increase in the velocity of the steam.

Reaction force: is due to the change in momentum relative velocity of the steam while passing over the blade passage. Centrifugal force: is the force acting on the blade due to change in radius of steam entering and leaving the turbine. Resultant force: is the resultant of Reaction force and Centrifugal force.
Srinivas School of Engineering, Mukka 15

Fixed Blade Moving Blade

Srinivas School of Engineering, Mukka

16

Difference between Impulse & Reaction Turbines

Impulse Turbine

Reaction Turbine

The steam expands The steam expands both in (pressure drops) completely the fixed and moving blades in nozzles or in the fixed continuously as it flows over blades them The blades have The blades have converging symmetrical profile of (aerofoil) profile uniform section The steam pressure while The steam pressure while passing over the blades passing over the blades remains constant gradually drops Because of large initial Because of gradual pressure pressure drop, the steam drop, the steam and turbine Srinivas School of Engineering, 17 and turbine speeds are veryMukka speeds are low

Impulse Turbine
Power is obtained only due to the impulsive force of the incoming steam

Reaction Turbine

Power is obtained due to impulsive force of incoming steam as well as reaction of exit steam Suitable for small capacity Suitable for medium & of power generation & high capacity power occupies less space per generation and occupies unit power more space per unit power Efficiency is lesser Efficiency is higher Compounding is Compounding is not necessary to reduce necessary speed Srinivas School of Engineering,
Mukka 18

Compounding of Impulse Turbines

As the complete expansion of steam takes in one stage
(i.e., the entire pressure drop from high pressure to low pressure takes place in only one set of nozzles), the turbine

rotor rotates at very high speed of about 30,000 rpm

(K.E. is fully absorbed).

High speed poses number of technical difficulties like destruction of machine by the large centrifugal forces developed, increase in vibrations, quick overheating of blades, impossibility of direct coupling to other machines, etc. To overcome the above difficulties, the expansion of steam is performed in several stages.
Srinivas School of Engineering, Mukka 19

Utilization of the high pressure energy of the steam by expanding it in successive stages is called Compounding. Methods of Compounding:
Velocity compounding (Curtis Impulse Turbine) Pressure compounding Pressure-velocity compounding

Srinivas School of Engineering, Mukka

20

Velocity compounding

Comprise of nozzles and two or more rows of moving blades arranged in series. In between two rows of moving blades, one set of guide (fixed) blades are suitably arranged. Guide (fixed) blades are fixed to casing and are stationary.
Srinivas School of Engineering, Mukka 21

N Nozzle M Moving Blade F Fixed Blade

Velocity Compounding (Curtis Impulse Turbine)

Srinivas School of Engineering, Mukka 22

Pressure compounding
Consists

of two stage of nozzles followed by two rows of moving blades.

Pressure Compounding

Srinivas School of Engineering, Mukka

24

Pressure-Velocity Compounding
(Combined Impulse Turbine)

A Axial clearance, N Nozzle, M Moving Blade, F Fixed Blade Pi and Pe Pressure at inlet & exit, Vi and Ve - Velocity at inlet & exit

Total pressure drop is divided into two stages & the total velocity obtained in eachSchool of Engineering, compounded stage is also Srinivas
Mukka 25

Srinivas School of Engineering, Mukka

26

Srinivas School of Engineering, Mukka

27

A Gas turbine uses the hot gases of combustion directly to produce the mechanical power.

Fuels used - Kerosene, coal, coal gas, bunker oil, gasoline, producer gas, etc.,

Classification:
1.
2.

Open cycle gas turbine Closed cycle gas turbine

Srinivas School of Engineering, Mukka 28

Applications
Gas turbines are used in: Electric power generation plants Steel, oil and chemical industries Aircrafts, Ship propulsion Turbo jet and turbo-propeller engines like rockets, missiles, space ships etc.,

Srinivas School of Engineering, Mukka

29

Open cycle gas turbine:

The entire flow of the working substance comes from atmosphere and is returned to the atmosphere back in each cycle.

Closed cycle gas turbine:

The flow of the working substance of specified mass is confined within the cyclic path. ( Air or Helium is the working substance)

Srinivas School of Engineering, Mukka

30

Open cycle gas turbine

COMPRESSOR: draws in air and compress it before it is fed into combustion chamber COMBUSTOR: fuel is added to the compressed air and burnt to produce high velocity exhaust gas TURBINE: extracts energy from exhaust gas
Srinivas School of Engineering, Mukka 31

Srinivas School of Engineering, Mukka

32

Srinivas School of Engineering, Mukka

33

Srinivas School of Engineering, Mukka

34

Srinivas School of Engineering, Mukka

35

Srinivas School of Engineering, Mukka

36

Difference between open & closed cycle turbine

Open cycle
Lesser thermal efficiency Loss of working fluid Bigger in size

Closed cycle
Higher No loss of working fluid Smaller

Big compressor is needed

Possibility of corrosion of blades and rotor Economical Exhaust gases from turbine exit to atmosphere

Smaller one is sufficient Free from corrosion

Not economical Fed back into the cycle
37

Pharmaceutical Pharmaceutical
Srinivas School of Engineering, Mukka 38

Hospitals Hospitals
Srinivas School of Engineering, Mukka 39

Pulp and Paper Pulp and Paper

Srinivas School of Engineering, Mukka 40

Srinivas School of Engineering, Mukka

41

Srinivas School of Engineering, Mukka

42

It is a prime mover, which converts hydro power (energy of water) into mechanical energy and further into hydro-electric power.

Srinivas School of Engineering, Mukka

43

Classification of Water Turbines

Based on action of water:
1. 2.

Impulse turbine pelton wheel. Reaction turbine francis and kaplan. Pelton turbine or Pelton wheel Francis turbine Kaplan turbine Low head turbine Medium head turbine High head turbine
Srinivas School of Engineering, Mukka

Based on name of originator:

1. 2.

3.

Based on head of water:

1. 2. 3.

44

Pelton Turbine
(Pelton Wheel or Free Jet Turbine) High head, tangential flow, horizontal shaft, impulse turbine

Srinivas School of Engineering, Mukka

45

PELTON TURBINE
Srinivas School of Engineering, Mukka 46

Pelton Turbine Runner

Srinivas School of Engineering, Mukka 47

Srinivas School of Engineering, Mukka

48

Only a part of the pressure energy of the water is converted into K.E. and the rest remains as pressure head.

Srinivas School of Engineering, Mukka

49

First, the water passes to the guide vanes which guide or deflect the water to enter the blades, called moving blades, mounted on the turbine wheel, without shock. The water from the guide blades are deflected on to the moving blades, where its part of the pressure energy is converted into K.E., which will be absorbed by the turbine wheel. The water leaving the moving blades will be at a low pressure.
Srinivas School of Engineering, Mukka 50

The difference in pressure between the entrance and the exit of the moving blades is called Reaction pressure, which acts on moving blades of the turbine wheel and sets up the turbine wheel into rotation in the opposite direction. Examples: Francis turbine, Kaplan turbine, Propeller turbine, Thompson turbine, Bulb turbine.
Srinivas School of Engineering, Mukka 51

Francis Turbine
Mixed flow, medium head reaction turbine.

Consists of a spiral casing enclosing a number of stationary guide blades fixed all round the circumference of an inner ring of moving blades (vanes) forming the runner, which is keyed to the turbine shaft.
Radial entry of water along the periphery of the runner and discharge at the center of the runner at low pressure through the diverging conical tube called draft tube.
Srinivas School of Engineering, Mukka 52

FRANCIS TURBINE
Srinivas School of Engineering, Mukka 53

Francis Inlet Scroll, Grand Coulee Dam

Srinivas School of Engineering, Mukka 54

Francis Runner, Grand Coulee Dam

Srinivas School of Engineering, Mukka

55

FRANCIS TURBINE of& GENERATOR Srinivas School Engineering,

Mukka 56

Srinivas School of Engineering, Mukka

57

Kaplan Turbine
Axial flow, low head. Similar to Francis turbine except the runner and draft tube. The runner (Boss or Hub) resembles with the propeller of the ship, hence some times it is called as Propeller turbine. Water flows parallel to the axis of the shaft.

Srinivas School of Engineering, Mukka

58

(GUIDE VANE)

(RUNNER VANE)

(SCROLL CASING)

KAPLAN TURBINE
Srinivas School of Engineering, Mukka

59

Srinivas School of Engineering, Mukka

60

Srinivas School of Engineering, Mukka

61

Vertical Kaplan Turbine

(Courtesy: VERBUND-Austrian Hydro Power) Srinivas School of Engineering,
Mukka 62

Propeller Turbine Runner

Srinivas School of Engineering, Mukka

63