Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 1K views

    Panduan RTWP v.2

    Uploaded by

    Ahmad Renaldi
    This document provides guidance on troubleshooting issues related to Received Total Wideband Power (RTWP) in 3M networks. It describes factors that affect RTWP, common problems and their causes, alarm notifications related to RTWP, and methods for checking RTWP values using NodeB and RNC network management tools. Recommendations are provided for configuring attenuation parameters and troubleshooting issues related to hardware failures, interference, incorrect configurations, and other potential problems that can impact uplink channel quality.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PPTX, PDF, TXT or read online from Scribd

    Panduan RTWP v.2

    Uploaded by

    Ahmad Renaldi
    1K views15 pages
    This document provides guidance on troubleshooting issues related to Received Total Wideband Power (RTWP) in 3M networks. It describes factors that affect RTWP, common problems and their causes, alarm notifications related to RTWP, and methods for checking RTWP values using NodeB and RNC network management tools. Recommendations are provided for configuring attenuation parameters and troubleshooting issues related to hardware failures, interference, incorrect configurations, and other potential problems that can impact uplink channel quality.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PPTX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides guidance on troubleshooting issues related to Received Total Wideband Power (RTWP) in 3M networks. It describes factors that affect RTWP, common problems and their causes, alarm notifications related to RTWP, and methods for checking RTWP values using NodeB and RNC network management tools. Recommendations are provided for configuring attenuation parameters and troubleshooting issues related to hardware failures, interference, incorrect configurations, and other potential problems that can impact uplink channel quality.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PPTX, PDF, TXT or read online from Scribd
    Download as pptx, pdf, or txt
    1K views15 pages

    Panduan RTWP v.2

    Uploaded by

    Ahmad Renaldi
    This document provides guidance on troubleshooting issues related to Received Total Wideband Power (RTWP) in 3M networks. It describes factors that affect RTWP, common problems and their causes, alarm notifications related to RTWP, and methods for checking RTWP values using NodeB and RNC network management tools. Recommendations are provided for configuring attenuation parameters and troubleshooting issues related to hardware failures, interference, incorrect configurations, and other potential problems that can impact uplink channel quality.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PPTX, PDF, TXT or read online from Scribd
    Download as pptx, pdf, or txt
    of 15

    Panduan Singkat Problem RTWP

    Prepared by SME Team

    01 July 2013

    Pengukuran RTWP
    RTWP adalah salah satu kriteria pengukuran kualitas uplink channel

    RTWP : Received Total Wideband Power (UE signal + UL interference) Dikenal juga sebagai UL RSSI (Received Signal Strength Indicator) RTWP = Measured RTWP - GAIN Faktor2 yang mempengaruhi RTWP: Air-interface signal (RTWP aktual yang diterima antenna) Feeder connection (RTWP aktual yang masuk ke TRX board) Internal parameter settings di TRX module (GAIN)

    Note:

    Apabila terdapat external amplification unit (e.g TMA), GAIN dari perangkat ini harus dimasukkan dalam perhitungan, sebagai channel attenuation.

    Huawei Confidential

    Page 1

    Setting standar untuk Attenuation di RX Branch


    Cek keberadaan perangkat dual band combiner di site : No Combiner Site = 0
    MO Parameter ID Parameter Name NE MML Command Meaning IsKey Mandatory Feature ID Feature Name Value Type GUI Value Range Enumeration Number/Bit Unit Actual Value Range Default Value Recommended Value RxBranch ATTEN Attenuation NodeB MOD RXBRANCH Indicates the attenuation of the RX channel of the RRU. NO NO None None Interval values 0~60 Not involved 0.5dB 0~30 0 When the TMA is not used, this parameter needs to be set to 0. When the 12 dB TMA is not used, this parameter needs to be set to 4 dB to 11 dB. When the 24 dB TMA is not used, this parameter needs to be set to 11 dB to 22 dB.

    With Combiner Site = max 3 dB (GUI value 6)

    Note : Ada 2 tipe dual band combiner yg digunakan di HCPT, yaitu Kathrein & Fingu.

    Huawei Confidential

    Page 2

    Problem Umum RTWP and Penyebabnya


    Problem Type Problem Uplink Channel Problem Location Air-interface channel Related Problem External interference Description Space characteristics: regional external interference dan site interference Time characteristics: intermittent interference dan continuous interference Signal characteristics: inter-system interference Inter modulation interference, incorrect antenna dan feeder connection, faulty di antenna and feeder components dikarenakan poor antenna and feeder quality RF channel configurations : berefek ke RTWP di semua carrier dalam RF channel termasuk channel attenuation configuration, interconnection mode, distributed sector, and single-antenna/dual-antenna mode Carrier configurations: berefek ke RTWP di carrier tersebut termasuk initial RTWP value and desensitization intensity Hardware failure di RF module termasuk RF Unit Hardware Fault Akibat dari heavy traffic, version upgrade, feature deployment, interference antar neighboring cells

    Antenna channel

    Plumbing issues

    Intra-TRX channel

    Incorrect configurations

    Hardware failure Problem Capacity Air-interface channel Service capacity problems

    Huawei Confidential

    Metode untuk Menemukan Problematic RTWP Cell


    Pilih counter Vs.MinRTWP karena counter in yang paling objektif di antara 3 RTWP counters
    (Vs.MinRTWP, Vs.MeanRTWP, Vs.MaxRTWP) Ambil low hour (3 AM) sebagai periode pengamatan Ambil nilai minimum Vs.MinRTWP dalam 7 hari di minggu yang sama Taruh threshold >-90 dBm untuk menyusun cell list

    Contoh distribusi permasalahan RTWP yang ditemukan di network

    Source:

    Presentation title in footer

    Huawei Confidential

    01 July 2013

    Cara Mengecek Configuration Problem dengan MML Command

    Parameter
    RF channel attenuation value RTWP Initial RTWP value RF desensitization value

    MML
    DSP RXBRANCH

    Impact Range
    Sector

    Check Point or Recommended Value


    Diset berdasarkanTMA installation and feeder connection. Umumnya, channel attenuation value = TMA gain-feeder loss Typical setting adalah 0. Typical setting adalah 0.

    DSP RXBRANCH LST RRU

    Cell Sector

    Cell desensitization intensity


    Interconnection mode Cell mode TMA gain value TMA mode Current status on the antenna port

    DSP DESENS

    Cell

    Typical setting adalah 0.

    LST SEC LST SEC DSP TMASUBUNIT DSP TMASUBUNIT DSP ANTENNAPORT

    Sector Sector Sector Sector Sector

    Diset berdasarkan physical connections and cek juga apakah hardware connection dalam kondisi normal Diset berbeda2 untuk single-antenna, dual-antenna, distributed scenarios Diset sesuai denganTMA specifications atau settable value. Umumnya, TMA mode adalah Normal. Umumnya, power switch ON.

    Huawei Confidential

    Page 5

    Alarm2 yang Terkait dengan Problem RTWP


    No. 1 2 3 4 5 6 7 8 Alarm Name ALM-26522 RF Unit RX Channel RTWP/RSSI Unbalanced ALM-26521 RF Unit RX Channel RTWP/RSSI Too Low ALM-26532 RF Unit Hardware Fault ALM-26752 ALD Hardware Fault ALM-26758 TMA Running Data and Configuration Mismatch ALM-26755 TMA Bypass ALM-26757 RET Antenna Running Data and Configuration Mismatch ALM-26541 ALD Maintenance Link Failure

    Huawei Confidential

    Page 6

    1. ALM-26522 RF Unit RX Channel RTWP/RSSI Unbalanced


    Triggering condition: Apabila perbedaan antara RTWP main RX channel dana RTWP diversity RX channel melebihi 10 dB. Suggested handling procedure:

    Antara main dan diversity channels, salah satu memiliki high RTWP dan lainnya normal. Clear alarm sesuai prosedur troublosehooting high RTWP. Main dan diversity channel memiliki high RTWP dan perbedaan keduanya melebihi 10 dB. Clear alarm sesuai prosedur troublosehooting high RTWP. Antara main dan diversity channels, salah satu memiliki low RTWP dan lainnya normal. Clear alarm sesuai prosedur troublosehooting high RTWP.

    2. ALM-26521 RF Unit RX Channel RTWP/RSSI Too Low


    Triggering cause: Apabila RTWP/RSSI RX channel di RF unit kurang dari -144 dBm. Suggested handling procedure:

    Salah satu di antara main dan diversity channel memiliki low RTWP. Clear alarm sesuai prosedur troublosehooting low RTWP. Diversity channel memiliki low RTWP. Untuk indoor site, diversity channel umumnya tidak dikoneksikan ke antena. Apabila kedua RF modules berada di kabinet yang sama, RF interconnection mode bisa di-disable. Main channel memiliko low RTWP. Untuk indoor site, RX dan TX channels terpisah akibatnya tidak ada uplink signal di main channel.

    3. ALM-26532 RF Unit Hardware Fault


    Triggering cause: RF channel atau RX channel kemungkinan faulty, berakibat ke abnormal RTWP. Suggested handling procedure: Lakukan soft dan hard reset RF module, cek apakah alarm hilang. Jika tidak, ganti RF module

    Huawei Confidential

    Page 7

    4. ALM-26752 ALD Hardware Fault


    Triggering Cause: TMA gain invalid. Suggested handling procedure: Replace TMA.

    5. ALM-26758 TMA Running Data and Configuration Mismatch


    Triggering cause: TMA gain inconsistent dengan configuration, berakibat ke abnormal uplink TMA gains and RTWP problems.
    Suggested handling procedure: Reset gain TMA atau working mode TMA.

    6. ALM-26755 TMA Bypass


    Triggering cause: TMA gain is invalid. Suggested handling procedure: Cek apakah TMA faulty. Jika ya, replace TMA. Jika tidak, set working mode TMA ke normal mode.

    7. ALM-26757 RET Antenna Running Data and Configuration Mismatch


    Triggering cause: Tilt angle antenna inconsistent dengan configuration. Suggested handling procedure: Reset tilt angle antenna terkait.

    8. ALM-26541 ALD Maintenance Link Failure


    Triggering Cause: TMA maintenance links disconnected.

    Suggested handling procedure: Cek TMA. Apabila maintenance links TMA tidak dapat di-restore, coba replace TMA.

    Huawei Confidential

    Page 8

    Cara Melakukan Pengecekan RTWP dengan LMT (sisi RNC)


    RTWP Real Time User Number di Cell

    Huawei Confidential

    Page 9

    Cara Melakukan Pengecekan RTWP dengan LMT (sisi Node-B)

    Petunjuk Setting

    RTWP Real Time

    Cell RTWP Tracing

    Huawei Confidential

    Page 10

    Contoh RX Scanning melalui Node-B LMT (WRFU locked, prosedur penyelidikan External Interference)

    Huawei Confidential
    Page 11

    Contoh UL Measurement Result Menggunakan Spectrum Analyzer (+ Drive Test, prosedur penyelidikan External Interference)

    00 = -100.4 dBm

    300 = -131.4 dBm

    900 = -132.2 dBm

    600 = -125.7 dBm

    Huawei Confidential

    Contoh skenario trial selama troubleshooting RTWP

    Sector 2 WRFU Board A Jumper B Combiner C Feeder D Antenna

    Sector 3 WRFU Board W Jumper X Combiner Y Feeder Z Antenna

    Untuk mengecek Board and Combiner, swap titik B dan X lalu cek ulang nilai RTWP Untuk mengecek Combiner, swap titik C dan Y lalu cek ulang nilai RTWP

    Huawei Confidential

    Huawei Confidential

    14

    01 July 2013

    You might also like