Lecture 15 Solar

Design with the Sun: Solar Design
How much energy comes from the Sun?

The sun provides about 1000 watts per square meter at the Earth's surface in direct sunlight (this reference intensity is often called "one sun" by solar energy scientists). This is enough power to power ten 100 watt light bulbs, or 50 twenty watt compact fluorescent light bulbs!
Solar Power: Capturing sunlight for:

Photovoltaics (solar electricity), Passive Solar Design (solar heating, natural cooling, and can incorporate hot water systems very nicely) Active solar thermal (Solar Hot Water/Air collectors) Solar thermal electricity (large and small scale electricity generation from solar heat) Solar cooking Solar distillation Solar water pumping
Renewable energy sources include:

Solar energy Hydropower - Channeling falling water to drive turbines (generators) to generate electricity. This is renewable because the Earth's hydrological cycle, which is driven by the Sun, continuously replenishes lakes and rivers through rain. Hydropower is an indirect form of solar power.
Wind Power - Using the wind to turn propellers connected to turbines. Wind power is considered renewable because the Sun and the Earth's rotation are always generating more winds. Wind power, like hydropower, is really another form of indirect solar power.
The wind power resource of the United States, like its solar power resource, is huge. The dark blue areas in the map below show the areas where "class 6" winds exist. Wind power is presently the fastest growing energy source in the world!
wind can be used to make electricity
windmills
Using Solar energy

in the design of architectural environments there are two broad ways of using the sun's energy: Passive solar design Active solar design
Passive solar design means that the sun's energy is being used, or controlled, through the physical makeup of the spaces. Active solar design means that some type of mechanical system is collecting, transforming, or moving the energy of the sun in the interior environment.
Natural Bridges National Monument, Utah

Active Solar: photo voltaic panels
The Natural Bridges PV System was dedicated in June 1980. Before switching to PV power, the Monument consumed up to 200,000 kilowatt hours of electricity annually. With installation of the PV system and the implementation of energy-efficient measures, the Monument now consumes about 70,000 kWh annually with over 90 percent of that coming from the sun.
Active solar: rooftop photo voltaic 'shingles'
The PV shingle shown here won Popular Science Magazine's grand award for What's new in Environmental Technology. The rooftop array of PV roof shingles was developed by United Solar Systems and Energy Conversion Devices under the DOE PV:BONUS program.
The PV shingles installed on this residential-type building replace common roofing shingles. The PV shingles look much like ordinary roofing shingles, but they generate electricity. The PV shingles cover the inner portion of the lower roof section.
They were laid out and nailed to the roof using the same methods as are used to lay conventional shingles. Like their nonPV counterparts, these shingles overlap providing for water shedding capability.
The modules are multi-junction amorphous silicon (a-Si) PV. The a-Si is deposited on a thin, flexible, and lightweight stainless steel substrate and laminated in a polymer. The modules are approximately 0.3 m x 3 m (1 foot x 10 feet).
This PV curtain wall incorporates solar cells

into a window mullion
Building-Integrated panels Outdoor Test Facility at NREL (National Renewable Energy Laboratory), Golden, Colorado
design with climate

(not against it)
Passive Solar Heating
The three principles of passive solar design are:

Gain: Getting enough sunlight in at the right time (and blocking it at the right time as well). Thermal Mass: Having enough thick masonry surfaces to store the energy from sunlight to keep the home warm at night, and from overheating during the day. Insulation: Having good insulation (and low air leakage) to keep the heat in during the winter, and heat out during the summer.
Characteristics of a Passive Solar Building

In the northern hemisphere most of its windows are facing the south Ideally, the interior surfaces that the light strikes are high density materials, such as concrete, brick, or stone, West windows are a source of high heat gain during the summer, and should be shaded. Generally, a plan with a long east-west axis and optimized south-facing wall will be the best passive solar design.
Passive Solar Design

Passive solar buildings often have "open floor plans" to facilitate the movement of heat from the south side through the rest of the spaces. Sometimes small fans are used to aid in warm air distribution in spaces with "closed floor plans".
Passive Solar Techniques 1: Direct Gain

There are two basic ways passive solar spaces gain solar energy, direct and indirect gain. Direct gain spaces, considered to be the simplest type, rely on south-facing windows, called solar windows. These can be conventionally manufactured operable or fixed windows on the south wall of the spaces.
Direct Gain
Solar energy, sun light, strikes the surfaces of the space and warms those surfaces.
While some of the heat is used immediately, walls, floors, ceilings, and furniture store the excess heat, which radiates into the space throughout the day and night. In all cases the performance and comfort of the direct gain space will increase if the thermal mass (concrete, concrete block, brick, or adobe) within the space is increased.
Passive Solar Techniques 2: Indirect Gain

The second passive solar house type, indirect gain, collects and stores energy in one part of the house and uses natural heat movement to warm the rest of the house. One of the more ingenious indirect gain designs employs the thermal storage wall, or Trombe wall placed three or four inches inside an expanse of south facing glass.
Named after its French inventor, Felix Trombe, the wall is constructed of high density materials--masonry, stone, brick, adobe, or water-filled containers--and is painted a dark color (like black, deep red, brown, purple or green) to more efficiently absorb the solar radiation.
Trombe wall
The solid wall is placed between south facing windows and living spaces. The wall absorbs solar heat through radiation, stores it, and then releases it into the space when
the indoor temperature falls below that of the walls surface.
Passive Solar Preliminary Design Rules of Thumb

The longest wall of the building should ideally be facing due (solar) south to receive the maximum winter and minimum summer heat gains. However, the south wall can be as much as 30 degrees east or west of solar south with only a 15% decrease in efficiency from the optimum
The path of the sun varies during the year
the location of the sun (relative to us) is described in terms of its altitude, and azimuth
Relationship of the earth to the sun at different times of the year
Bringing sun/daylight inside
Athens, Ohio is located at: 82 degrees w West longitude 39.5 degrees North latitude
The Tropic of Cancer (23 1/2N) and the Tropic of Capricorn (23 1/2S), mark the farthest points north and south of the equator where the sun's rays fall vertically and the Arctic Circle (66 1/2N) and the Antarctic Circle (66 1/2S), mark the farthest points north and south of the equator where the sun appears above the horizon each day of the year. Inside the Arctic circle, the sun never rises for the winter months.
Active Solar Design
Active systems involve pumps (for water) or fans (for air) and collect sunlight with flat plate collectors. The flat plate collector is essentially an insulated box that allows sunlight in on one side through a glass covered window and absorb it with dark colored metallic surfaces.
The collected (and trapped) heat is then transferred by conduction into a working fluid (typically water with or without antifreeze, or air), which is continuously pumped through pipes in contact with the collecting surfaces. The working fluid is then routed either to a storage medium, such as a hot water tank, rock bed, or radiant floor, or transferred directly into the air.
Essential Information in Solar Design

The suns light is an energy source. The suns light that strikes the earth varies across the surface of the earth. The seasons are a natural response to the varying intensity of sunlight striking the earths surface due to the tilting of the earth and the thickness of the earths atmosphere. The suns light that strikes a building varies during the year, and during a day, due to the movement of the sun from east to west. The suns light that strikes a building can be controlled by the placement (orientation) of the building on its site, and by the design of the buildings overall shape, and the placement of openings.

Lecture 15 Solar

Uploaded by

Copyright:

Available Formats

Lecture 15 Solar

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Lecture 15 Solar

Uploaded by

Copyright:

Available Formats

Design with the Sun: Solar Design

How much energy comes from the Sun?

Solar Power: Capturing sunlight for:

Renewable energy sources include:

wind can be used to make electricity

Using Solar energy

Natural Bridges National Monument, Utah

Active solar: rooftop photo voltaic 'shingles'

This PV curtain wall incorporates solar cells

design with climate

Passive Solar Heating

The three principles of passive solar design are:

Characteristics of a Passive Solar Building

Passive Solar Design

Passive Solar Techniques 1: Direct Gain

Passive Solar Techniques 2: Indirect Gain

Passive Solar Preliminary Design Rules of Thumb

The path of the sun varies during the year

Relationship of the earth to the sun at different times of the year

Bringing sun/daylight inside

Active Solar Design

Essential Information in Solar Design

You might also like